Qubit Architecture Research Articles

Superconducting quasiparticle-amplifying transmon: A qubit-based sensor for meV-scale phonons and single terahertz photons

With great interest from the quantum computing community, an immense amount of R&D effort has been invested into improving superconducting qubits. The technologies developed for the design and fabrication of these qubits can be directly applied to applications for ultralow-threshold particle detectors, e.g., low-mass dark matter and far-infrared photon sensing. We propose a novel energy-resolving sensor based on the transmon qubit architecture combined with a signal-enhancing superconducting quasiparticle amplification stage. We refer to these sensors as SQUATs: superconducting quasiparticle-amplifying transmons. We detail the operating principle and design of this new sensor and predict that, with minimal R&D effort, solid-state-based detectors patterned with these sensors can achieve sensitivity to single terahertz photons, and sensitivity to 1meV phonons in the detector absorber substrate on the microsecond timescale. Published by the American Physical Society 2024

High-coherence quantum acoustics with planar superconducting qubits

Quantum acoustics is an emerging platform for hybrid quantum technologies enabling quantum coherent control of mechanical vibrations. High-overtone bulk acoustic resonators (HBARs) represent an attractive mechanical implementation of quantum acoustics due to their potential for exceptionally high mechanical coherence. Here, we demonstrate an implementation of high-coherence HBAR quantum acoustics integrated with a planar superconducting qubit architecture, demonstrating an acoustically induced-transparency regime of high cooperativity and weak coupling, analogous to the electrically induced transparency in atomic physics. Demonstrating high-coherence quantum acoustics with planar superconducting devices enables interesting applications for acoustic resonators in quantum technologies.

Flip-Chip-Based Fast Inductive Parity Readout of a Planar Superconducting Island

The properties of superconducting devices depend sensitively on the parity (even or odd) of the quasiparticles that they contain. Encoding quantum information in the parity degree of freedom is central in several emerging solid-state qubit architectures, including in hybrid superconductor-semiconductor devices. In the latter case, accurate, nondestructive, and time-resolved parity measurements are a challenging issue. Here, we report on control and real-time parity measurement in a superconducting island embedded in a superconducting loop and realized in a hybrid two-dimensional heterostructure using a microwave resonator. To avoid microwave losses impeding time-resolved measurements, the device and readout resonator are located on separate chips, connected via flip-chip bonding, and couple inductively through vacuum. The superconducting resonator detects the parity-dependent circuit inductance, allowing for fast parity readout. We have resolved even- and odd-parity states with a signal-to-noise ratio of SNR≈3 for an integration time of 20μs and a detection fidelity exceeding 98%. The real-time parity measurement shows a state lifetime extending into the millisecond range. Our approach will lead to a better understanding of coherence-limiting mechanisms in superconducting quantum hardware and help to advance inductive-readout schemes for hybrid qubits. Published by the American Physical Society 2024

Decay-protected superconducting qubit with fast control enabled by integrated on-chip filters

Achieving fast gates and long coherence times for superconducting qubits presents challenges, typically requiring either a stronger coupling of the drive line or an excessively strong microwave signal to the qubit. To address this, we introduce on-chip filters of the qubit drive exhibiting a stopband at the qubit frequency, thus enabling long coherence times and strong coupling at the subharmonic frequency, facilitating fast single-qubit gates, and reduced thermal load. The filters exhibit an extrinsic relaxation time of a few seconds while enabling sub-10-ns gates with subharmonic control. Here we show up to 200-fold improvement in the measured relaxation time at the stopband. Furthermore, we implement subharmonic driving of Rabi oscillations with a π pulse duration of 12 ns. Our demonstration of on-chip filters and efficient subharmonic driving in a two-dimensional quantum processor paves the way for a scalable qubit architecture with reduced thermal load and noise from the control line.

Intrinsic noise of the single-electron box

The radio-frequency (rf) single-electron box is becoming an attractive charge sensor for semiconductor-based quantum computing devices due to its high sensitivity and small footprint, which facilitate the design of highly connected qubit architectures. However, an understanding of its ultimate sensitivity is missing due to the lack of a noise model. Here, we quantify the intrinsic noise of the single-electron box arising from stochastic cyclic electron tunneling between a quantum dot and a reservoir driven by a periodic gate voltage. We use both a master-equation formalism and Markov Monte Carlo simulations to calculate the gate-noise current and find that the noise mechanism can be represented as a cyclostationary process. We consider the implications of this cyclostationary noise on the ultimate sensitivity of single-electron box sensors for fast high-fidelity readout of spin qubits, in particular evaluating results for rf reflectometry implementations and the back action of the sensor on a qubit. Furthermore, we determine the conditions under which the intrinsic noise limit could be measured experimentally and techniques by which the noise can be suppressed to enhance qubit-readout fidelity. Published by the American Physical Society 2024

Phase dynamics of tunnel Al-based ferromagnetic Josephson junctions

By measuring the current–voltage characteristics and the switching current distributions as a function of temperature, we have investigated the phase dynamics of Al tunnel ferromagnetic Josephson junctions (JJs), designed to fall in the typical range of parameters of state-of-the-art transmons, providing evidence of phase diffusion processes. The comparison with the experimental outcomes on non-magnetic JJs with nominally the same electrodynamical parameters demonstrates that the introduction of ferromagnetic barriers does not cause any sizeable detrimental effect and supports the notion of including tunnel ferromagnetic JJs in qubit architectures.

Spatially correlated classical and quantum noise in driven qubits.

Correlated noise across multiple qubits poses a significant challenge for achieving scalable and fault-tolerant quantum processors. Despite recent experimental efforts to quantify this noise in various qubit architectures, a comprehensive understanding of its role in qubit dynamics remains elusive. Here, we present an analytical study of the dynamics of driven qubits under spatially correlated noise, including both Markovian and non-Markovian noise. Surprisingly, we find that by operating the qubit system at low temperatures, where correlated quantum noise plays an important role, significant long-lived entanglement between qubits can be generated. Importantly, this generation process can be controlled on-demand by turning the qubit driving on and off. On the other hand, we demonstrate that by operating the system at a higher temperature, the crosstalk between qubits induced by the correlated noise is unexpectedly suppressed. We finally reveal the impact of spatio-temporally correlated 1/f noise on the decoherence rate, and how its temporal correlations restore lost entanglement. Our findings provide critical insights into not only suppressing crosstalk between qubits caused by correlated noise but also in effectively leveraging such noise as a beneficial resource for controlled entanglement generation.

Characterizing losses in InAs two-dimensional electron gas-based gatemon qubits

The tunneling of Cooper pairs across a Josephson junction (JJ) allows for the nonlinear inductance necessary to construct superconducting qubits, amplifiers, and various other quantum circuits. An alternative approach using hybrid superconductor-semiconductor JJs can enable superconducting qubit architectures with all electric control. Here we present continuous-wave and time-domain characterization of gatemon qubits and coplanar waveguide resonators based on an InAs two-dimensional electron gas. We show that the qubit undergoes a vacuum Rabi splitting with a readout cavity, and we drive coherent Rabi oscillations between the qubit ground and first excited states. We measure qubit relaxation times to be T1= 100 ns over a 1.5 GHz tunable band. We detail the loss mechanisms present in these materials through a systematic study of the quality factors of coplanar waveguide resonators. While various loss mechanisms are present in III-V gatemon circuits, we detail future directions in enhancing the relaxation times of qubit devices on this platform. Published by the American Physical Society 2024

Quantum Measurement Classification Using Statistical Learning

Interpreting the results of a quantum computer can pose a significant challenge due to inherent noise in these mesoscopic quantum systems. Quantum measurement, a critical component of quantum computing, involves determining the probabilities linked with quantum states post-multiple circuit computations based on quantum readout values provided by hardware. While there are promising classification-based solutions, they can either misclassify or necessitate excessive measurements, thereby proving to be costly. This article puts forth an efficient method to discern the quantum state by analyzing the probability distributions of data post-measurement. Specifically, we employ cumulative distribution functions to juxtapose the measured distribution of a sample against the distributions of basis states. The efficacy of our approach is demonstrated through experimental results on a superconducting transmon qubit architecture, which shows a substantial decrease (88%) in single qubit readout error compared to state-of-the-art measurement techniques. Moreover, we report additional error reduction (12%) compared to state-of-the-art measurement techniques when our technique is applied to enhance existing multi-qubit classification techniques. We also demonstrate the applicability of our proposed method for higher dimensional quantum systems, including classification of single qutrits as well as multiple qutrits.

High-Sensitivity ac-Charge Detection with a MHz-Frequency Fluxonium Qubit

Owing to their strong dipole moment and long coherence times, superconducting qubits have demonstrated remarkable success in hybrid quantum circuits. However, most qubit architectures are limited to the GHz frequency range, severely constraining the class of systems they can interact with. The fluxonium qubit, on the other hand, can be biased to very low frequency while being manipulated and read out with standard microwave techniques. Here, we design and operate a heavy fluxonium with an unprecedentedly low transition frequency of 1.8 MHz. We demonstrate resolved sideband cooling of the “hot” qubit transition with a final ground state population of 97.7%, corresponding to an effective temperature of 23 μK. We further demonstrate coherent manipulation with coherence times T1=34 μs, T2*=39 μs, and single-shot readout of the qubit state. Importantly, by directly addressing the qubit transition with a capacitively coupled waveguide, we showcase its high sensitivity to a radio-frequency field. Through cyclic qubit preparation and interrogation, we transform this low-frequency fluxonium qubit into a frequency-resolved charge sensor. This method results in a charge sensitivity of 33 μe/Hz, or an energy sensitivity (in joules per hertz) of 2.8ℏ. This method rivals state-of-the-art transport-based devices, while maintaining inherent insensitivity to dc-charge noise. The high charge sensitivity combined with large capacitive shunt unlocks new avenues for exploring quantum phenomena in the 1–10 MHz range, such as the strong-coupling regime with a resonant macroscopic mechanical resonator. Published by the American Physical Society 2024

D-Mon: A Transmon with Strong Anharmonicity Based on Planar c-Axis Tunneling Junction between d-Wave and s-Wave Superconductors.

We propose a novel qubit architecture based on a planar c-axis Josephson junction between a thin flake d-wave superconductor, such as a high-T_{c} cuprate Bi_{2}Sr_{2}CaCu_{2}O_{8+x}, and a conventional s-wave superconductor. When operated in the transmon regime the device-that we call "d mon"-becomes insensitive to offset charge fluctuations and, importantly, exhibits at the same time energy level spectrum with strong anharmonicity that is widely tunable through the device geometry and applied magnetic flux. Crucially, unlike previous qubit designs based on d-wave superconductors the proposed device operates in a regime where quasiparticles are fully gapped and can be therefore expected to achieve long coherence times.

A Novel Design of Quantum Multiplexer and its Identity Rules based Optimization for the Spin-Torque based n-Qubit Architecture

A Novel Design of Quantum Multiplexer and its Identity Rules based Optimization for the Spin-Torque based <i>n</i>-Qubit Architecture

Mitigation of quantum crosstalk in cross-resonance-based qubit architectures

Mitigation of quantum crosstalk in cross-resonance-based qubit architectures

Phase-Driving Hole Spin Qubits.

The spin-orbit interaction in spin qubits enables spin-flip transitions, resulting in Rabi oscillations when an external microwave field is resonant with the qubit frequency. Here, we introduce an alternative driving mechanism mediated by the strong spin-orbit interactions in hole spin qubits, where a far-detuned oscillating field couples to the qubit phase. Phase-driving at radio frequencies, orders of magnitude slower than the microwave qubit frequency, induces highly nontrivial spin dynamics, violating the Rabi resonance condition. By using a qubit integrated in a silicon fin field-effect transistor, we demonstrate a controllable suppression of resonant Rabi oscillations and their revivals at tunable sidebands. These sidebands enable alternative qubit control schemes using global fields and local far-detuned pulses, facilitating the design of dense large-scale qubit architectures with local qubit addressability. Phase-driving also decouples Rabi oscillations from noise, an effect due to a gapped Floquet spectrum and can enable Floquet engineering high-fidelity gates in future quantum processors.

Hardware-Conscious Optimization of the Quantum Toffoli Gate

While quantum computing holds great potential in combinatorial optimization, electronic structure calculation, and number theory, the current era of quantum computing is limited by noisy hardware. Many quantum compilation approaches can mitigate the effects of imperfect hardware by optimizing quantum circuits for objectives such as critical path length. Few approaches consider quantum circuits in terms of the set of vendor-calibrated operations (i.e., native gates) available on target hardware. This manuscript expands the analytical and numerical approaches for optimizing quantum circuits at this abstraction level. We present a procedure for combining the strengths of analytical native gate-level optimization with numerical optimization. Although we focus on optimizing Toffoli gates on the IBMQ native gate set, the methods presented are generalizable to any gate and superconducting qubit architecture. Our optimized Toffoli gate implementation demonstrates an 18% reduction in infidelity compared with the canonical implementation as benchmarked on IBM Jakarta with quantum process tomography. Assuming the inclusion of multi-qubit cross-resonance (MCR) gates in the IBMQ native gate set, we produce Toffoli implementations with only six multi-qubit gates, a 25% reduction from the canonical eight multi-qubit implementations for linearly connected qubits.

Convolutional-Neural-Network-Based Hexagonal Quantum Error Correction Decoder

Topological quantum error-correcting codes are an important tool for realizing fault-tolerant quantum computers. Heavy hexagonal coding is a new class of quantum error-correcting coding that assigns physical and auxiliary qubits to the vertices and edges of a low-degree graph. The layout of heavy hexagonal codes is particularly suitable for superconducting qubit architectures to reduce frequency conflicts and crosstalk. Although various topological code decoders have been proposed, constructing the optimal decoder remains challenging. Machine learning is an effective decoding scheme for topological codes, and in this paper, we propose a machine learning heavy hexagonal decoder based on a convolutional neural network (CNN) to obtain the decoding threshold. We test our method on heavy hexagonal codes with code distance of three, five, and seven, and increase it to five, seven, and nine by optimizing the RestNet network architecture. Our results show that the decoder thresholding accuracies are about 0.57% and 0.65%, respectively, which are about 25% higher than the conventional decoding scheme under the depolarizing noise model. The proposed decoding architecture is also applicable to other topological code families.

Baseband Control of Superconducting Qubits with Shared Microwave Drives

Accurate control of qubits is the central requirement for building functional quantum processors. For the current superconducting quantum processor, high-fidelity control of qubits is mainly based on independently calibrated microwave pulses, which could differ from each other in frequencies, amplitudes, and phases. With this control strategy, the needed physical resource could be challenging, especially when scaling up to large-scale quantum processors is considered. Inspired by Kane's proposal for spin-based quantum computing, here, we explore theoretically the possibility of baseband flux control of superconducting qubits with only shared and always-on microwave drives. In our strategy, qubits are by default far detuned from the drive during system idle periods, qubit readout and baseband flux-controlled two-qubit gates can thus be realized with minimal impacts from the always-on drive. By contrast, during working periods, qubits are tuned on resonance with the drive and single-qubit gates can be realized. Therefore, universal qubit control can be achieved with only baseband flux pulses and always-on shared microwave drives. We apply this strategy to the qubit architecture where tunable qubits are coupled via a tunable coupler, and the analysis shows that high-fidelity qubit control is possible. Besides, the baseband control strategy needs fewer physical resources, such as control electronics and cooling power in cryogenic systems, than that of microwave control. Of note, the flexibility of baseband flux control could be employed for addressing the nonuniformity issue of superconducting qubits, potentially allowing the realization of multiplexing and cross-bar technologies and thus controlling large numbers of qubits with fewer control lines. We thus expect that baseband control with shared microwave drives can help build large-scale superconducting quantum processors.

Noise dynamics of quantum annealers: estimating the effective noise using idle qubits

Quantum annealing is a type of analog computation that aims to use quantum mechanical fluctuations in search of optimal solutions of QUBO (quadratic unconstrained binary optimization) or, equivalently, Ising problems. Since NP-hard problems can in general be mapped to Ising and QUBO formulations, the quantum annealing paradigm has the potential to help solve various NP-hard problems. Current quantum annealers, such as those manufactured by D-Wave Systems, Inc. have various practical limitations including the size (number of qubits) of the problem that can be solved, the qubit connectivity, and error due to the environment or system calibration, which can reduce the quality of the solutions. Typically, for an arbitrary problem instance, the corresponding QUBO (or Ising) structure will not natively embed onto the available qubit architecture on the quantum chip. Thus, in these cases, a minor embedding of the problem structure onto the device is necessary. However, minor embeddings on these devices do not always make use of the full sparse chip hardware graph, and a large portion of the available qubits stay unused during quantum annealing. In this work, we embed a disjoint random QUBO on the unused parts of the chip alongside the QUBO to be solved, which acts as an indicator of the solution quality of the device over time. Using experiments on three different D-Wave quantum annealers, we demonstrate that (i) long term trends in solution quality exist on the D-Wave device, and (ii) the unused qubits can be used to measure the current level of noise of the quantum system.

Realizable time crystal of four silicon quantum dot qubits

We demonstrate that exciting possible realizations of quantum Floquet matter are within reach for modern silicon spin qubits based in quantum dots, most notably the discrete time crystal (DTC). This is significant given that spin qubits have fallen behind other qubit architectures in terms of size and control. However, silicon spin qubits are especially well suited to this task as the charge noise that usually foils gate operations can now be leveraged as an asset in this time-crystal realization. We illustrate differences between prethermal phenomena and true time-crystalline spatiotemporal order. We demonstrate that even for a spin chain of four qubits, rich regime structures can be established by observing signatures of the discrete time crystal and the Floquet symmetry-protected topological regime both distinct from the thermal regime. We also analyze the persistence of these signatures at longer chain lengths, showing that the DTC lifetime grows exponentially with the system length and that these signatures may even be detectable for chains as small as three qubits. We also discuss the effects of longer pulse durations and the effectiveness of pulse sequences for converting the exchange interaction to an Ising model. Our theoretical predictions are well suited for immediate experimental implementations using currently existing quantum dot spin qubit systems.

Performance of Planar Floquet Codes with Majorana-Based Qubits

Quantum error correction is crucial for any quantum computing platform to achieve truly scalable quantum computation. The surface code and its variants have been considered the most promising quantum error correction scheme due to their high threshold, low overhead, and relatively simple structure that can naturally be implemented in many existing qubit architectures, such as superconducting qubits. The recent development of Floquet codes offers another promising approach. By going beyond the usual paradigm of stabilizer codes, Floquet codes achieve similar performance while being constructed entirely from two-qubit measurements. This makes them particularly suitable for platforms where two-qubit measurements can be implemented directly, such as measurement-only topological qubits based on Majorana zero modes (MZMs). Here, we explain how two variants of Floquet codes can be implemented on MZM-based architectures without any auxiliary qubits for syndrome measurement and with shallow syndrome extraction sequences. We then numerically demonstrate their favorable performance. In particular, we show that they improve the threshold for scalable quantum computation in MZM-based systems by an order of magnitude, and significantly reduce space and time overheads below threshold.