Amount Of Flour Research Articles

Predicting rheological behavior and baking quality of wheat flour using a GlutoPeak test.

Baking test is considered as the most reliable method for assessing wheat-baking quality. However, baking test requires trained stuff, time, and large sample amount. These disadvantages have led to a growing demand to develop new rapid tests which would enable prediction of baked product quality with a limited flour size. Therefore, we tested the possibility of using a GlutoPeak tester to predict loaf volume and breadcrumb textural properties. Discrimination of wheat varieties according to quality with a restricted flour amount was also examined. Furthermore, we proposed the limit values of GlutoPeak parameters which would be highly beneficial for millers and bakers when determine suitability of flour for end-use.

Design of Prototype System for Temperature and Humidity Control in Flour Storage

Storage of wheat flour requires good temperature and humidity to avoid mold growth that can damage the nutrients in wheat flour. The temperatures and humidity required for proper storage are above temperatures and humidity below 60% RH. The method used in flour storage is FIFO (First In First Out) using a Load cell sensor as a marker for flour input. The incoming flour will input the time, location and amount of flour, so that it can be easily determined which flour will come out first. To facilitate monitoring of temperature, humidity and stock amount in flour storage in this study, sending monitoring data wirelessly using an internet network that can be accessed anywhere. The test results of this study show that the DHT22 sensor can measure temperature and humidity well, which has a RE (Relative Error) value of 0.5% temperature and 3.9% humidity compared to the HTC-1 measuring instrument. The load cell test compared to digital scales has an accurate value using a linear formula. In the QoS test, sending sensor data to the web server has a good value according to the ITU-T standard, namely delay <150ms

Development and characterization of couscous-like product using bulgur flour as by-product.

Couscous is produced traditionally by agglomeration of Triticum durum semolina with water. The aims of this study were: to produce couscous-like product by substitution of semolina with bulgur by-product (undersize bulgur); to find optimum quantity of bulgur flour and processing conditions. In order to determine the optimum processing parameters and recipes; 0, 25 and 50% of bulgur containing couscous-like samples were prepared. The color, yield, sensory properties, total phenol and flavonoid contents, bulk density, protein and ash content, texture properties were determined. Two different types of dryer e.g. packed bed and microwave were used. Optimum parameters were predicted as 50% of bulgur flour for packed bed (60°C) and microwave (180W) drying with 50% (w/w) of water according to yields, color (L*, a*, b*) values and sensory properties (color, odor, general appearance). For packed bed drying at 60°C yields were 54.28±3.78, 47.70±1.73 and 52.57±7.04% for 0, 25 and 50% bulgur flour containing samples, respectively. Lightness (L*) values of couscous-like samples were decreased with increasing the quantity of bulgur flour after both drying processes. Results of sensory analysis revealed that couscous-like bulgur were more preferable for consumers.

Substantiation of the use of spice plants for enrichment of wheat bread

Spice, aromatic, volatile-oil-bearing plants are rich in essential aromatic oils, vitamins, minerals that give phytoncidic, prophylactic, therapeutic, functional properties to products, improve food taste and digestibility. To prepare plant powder, it is necessary to use a certain part of plants, dry, grind in a laboratory mill to a particle size of 10 -4 –10 -1 mm and mix to take a weighed prescription sample. In order to prepare the Quinoa flour, it is necessary to use Quinoa seeds, grind in a laboratory mill to a particle size of 30–40 microns and mix to take a weighed prescription sample. The use of plants in bread production is promising. The efficiency of using plants in the technology of bakery products as both an enhancer of nutrition value and a nutrient medium for yeast, which in turn affected the quality of finished products – porosity, acidity, specific volume was revealed. In order to develop an effective technology for the use of plant additives, create new types of products with the properties that meet today’s needs of consumers in Ukraine and the world, it is necessary to clarify the relationship between the components of spice plants and other components. The replacement of a part of the prescription amount of flour with dried and milled plants Narrowleaf Mountainmint (Piknanthemum trifolium L.), Quinoa (Chenop ō dium qu ī noa L.), Scarlet Beebalm (Monarda didyma L.), Korean Mint (Agastache rugosa L.), Hemp Dogbane (V i tex cannabinum L.), Mint-shrub (Elsholtzia Stauntonii L.), Moroccan Spearmint (Mentha spic а ta Moroccan L.) during bread production was experimentally grounded and implemented. The developed method of bread production under the new formulations relates to the agriculture and food industry and can be applied during laboratory bread baking. The expediency of introducing an additive into the wheat dough in a dosage of not more than 5 % into the flour of Scarlet Beebalm powder; up to 10 % of Narrowleaf Mountainmint and Quinoa is revealed.

Effects of Processing Methods, DOP Amount and Filler Content on the Mechanical Properties of Recycled Polyvinyl Chloride (PVC) Composites

PVC is one of the most commercialized thermoplastic materials with industrial and household applications. Plastic possesses an important percentage in waste stream and its recycling is vital. Plasticizer usage is also essential for the PVC manufacturing and recycling. It is the purpose of this study to determine the effects of processing methods, DOP concentration and wood flour amount on the mechanical properties of recycled PVC composites. 15 and 30 phr (per-hundred-resin) DOP and 0-15-30 phr wood flour was studied. Composite materials were produced using injection and compression molding methods. Tensile, flexural, impact, hardness (shore D) and density of the composites were determined. Based on these results, DOP and filler content and process had a significant effect on mechanical properties. Utilization of DOP in the PVC matrix made material softer and flexible. Resulting materials had higher elongation at break and impact strength and smaller shore D values. In an expense to these good results, it reduced the tensile and flexural strength and modulus values. Addition of wood filler in the system, increased modulus values while reducing strength values. In the case of processing methods, injection molded samples provided overall better properties than compression molded ones. It should be noted that, in the case of injection molding, samples were better mixed due to the screw in the machine. Recycling of PVC is a vital subject and more study is needed.

Accelerating wheat breeding for end-use quality with multi-trait genomic predictions incorporating near infrared and nuclear magnetic resonance-derived phenotypes

Using NIR and NMR predictions of quality traits overcomes a major barrier for the application of genomic selection to accelerate improvement in grain end-use quality traits of wheat. Grain end-use quality traits are among the most important in wheat breeding. These traits are difficult to breed for, as their assays require flour quantities only obtainable late in the breeding cycle, and are expensive. These traits are therefore an ideal target for genomic selection. However, large reference populations are required for accurate genomic predictions, which are challenging to assemble for these traits for the same reasons they are challenging to breed for. Here, we use predictions of end-use quality derived from near infrared (NIR) or nuclear magnetic resonance (NMR), that require very small amounts of flour, as well as end-use quality measured by industry standard assay in a subset of accessions, in a multi-trait approach for genomic prediction. The NIR and NMR predictions were derived for 19 end-use quality traits in 398 accessions, and were then assayed in 2420 diverse wheat accessions. The accessions were grown out in multiple locations and multiple years, and were genotyped for 51208 SNP. Incorporating NIR and NMR phenotypes in the multi-trait approach increased the accuracy of genomic prediction for most quality traits. The accuracy ranged from 0 to 0.47 before the addition of the NIR/NMR data, while after these data were added, it ranged from 0 to 0.69. Genomic predictions were reasonably robust across locations and years for most traits. Using NIR and NMR predictions of quality traits overcomes a major barrier for the application of genomic selection for grain end-use quality traits in wheat breeding.

Determination of free and bound phenolic compounds and their antioxidant activity in buckwheat bread loaf, crust and crumb

This study demonstrated the role of buckwheat flour in improving phenolic compounds in white wheat bread. Three bread samples were obtained by using different buckwheat levels (10, 20 and 30%) in formulations. HPLC-ESI-MS was used to detect the presence of free and bound phenolic compounds in bread loaf, crust and crumb. The phenolic profile changed thanks to the addition of buckwheat flour; in fact, flavan-3-ols and flavonols compounds (i.e. rutin, catechin, etc.) were identified in enriched buckwheat. As expected, the phenolic content increased proportionally to buckwheat flour quantity in bread formulations. The total free phenolic amounts ranged from 109 to 235 mg/kg d.w. in control bread and 30% enriched buckwheat bread, respectively. Bread crusts showed the highest total free and bound phenolic content; however, flavan-3-ols, flavonols and flavones are more concentrated in crumb than crust. Moreover, enriched breads showed higher in vitro antioxidant properties (evaluated by DPPH and ABTS assays) than control one.

Usage of undersize bulgur flour in production of short-cut pasta-like couscous

Couscous is a traditional cereal product produced by rubbing durum semolina particles with water by hand, but can be produced by using pasta pressing technique. This study aimed to produce a short-cut pasta type couscous by substitution of semolina with undersize bulgur at 25, 50, 75 and 100%, by determining optimum parameters. Bulk density, cooking loss, volume and weight increases, protein and ash contents, color, sensory, texture and functional properties were determined. Couscous samples were prepared and dried using packed bed (60 and 80 °C) and microwave dryers (180 and 360 W) to determine optimum parameters. It was found that the quantity of bulgur flour was significantly (p ≤ 0.05) effective on the sensory attributes, bulk density, cooking loss, volume and weight increases, protein and ash contents in contrast to functional properties. Weight and volume increase values decreased with increasing quantity of bulgur flour. Couscous samples containing bulgur flour have higher protein than the control due to higher protein content of bulgur. According to texture profile, hardness of couscous containing bulgur flour was lower than the semolina control for each drying technique. Results revealed the fact that the production of pasta type couscous is possible using totally undersize bulgur instead of semolina.

DEVELOPMENT OF RECIPES AND ESTIMATION OF RAW MATERIAL FOR PRODUCTION OF WHEAT BREAD

The study of technological parameters of Midas wheat flour and possibility to use little-spread plants at wheat bread manufacturing was realized. Parameters and regimes for keeping and baking bread of new recipes were elaborated and selected. The elaborated method of bread manufacturing by new recipes relates to the field of agriculture and food industry and may be used at a laboratory baking of bread. There was experimentally grounded and introduced the change of a part of recipe quantity of wheat flour for dried and comminuted plants of Népeta mussinii L., Polymnia osotolysta L., Amaranthus tricolor L., Cosmos sulphureus L., Tanacetum parthenium L., Cyperus esculentus L., Physalis tomentous L. at baking bread. According to determined physical-chemical, organoleptic parameters of bread, a possibility of baking bread using plants was proved. The expedience of introducing vegetable additives of Népeta mussinii L., Polymnia osotolysta L., Amaranthus tricolor L., Tanacetum parthenium into wheat dough in the dose no more than 5 % to the flour mass; up to 10 % – Cosmos sulphureus L and up to 15 % – Cyperus esculentus L., Physalis tomentous L was proved. At these very dosages bread had an evenly colored crust, without breaks and cracks, elastic crumb, thin-walled porosity, expressed bread taste and pleasant smell of additives as opposite to other experimental samples.

표고버섯 분말을 첨가한 쌀 쿠키의 품질 특성 및 항산화 활성

This study was conducted to investigate the effect of Lentinus edodes powder on the quality characteristics and antioxidant of rice cookies. The cookies for this experiment was made by 3 main ingredients including rice powder, flour, Lentinus edodes powder. The proportion of rice powder was fixed to 50% for the total amount of ingredients. The amount of reminded 2 ingredients (flour and Lentinus edodes powder) were varied. The amount of flour was decreased up to 38%, and the addition of Lentinus edodes powder was increased to 4%, 8% and 12%. Density of the dough, hardness, total polyphenol content, DPPH free radical scavenging activity, and reducing power increased with increasing Lentinus edodes powder content. Moisture content, pH of the dough, spread factor, loss rate, leavening rate, and L values of the cookies were decreased with increasing Lentinus edodes powder content. The result of consumer acceptance test revealed that there were no significant differences in smell, taste and overall acceptability, while the preference of color decreased as the amount of Lentinus edodes powder increased. To sum up, the cookies with 12% Lentinus edodes powder can produced the best results in terms of quality and antioxidant potential.

A rapid extensigraph protocol for measuring dough viscoelasticity and mixing requirement

The extensigraph is particularly useful in characterizing dough viscoelastic properties; however, testing throughput for standard method is low due to the prerequisite for farinograph water absorption, long dough resting and milling to prepare large amounts of flour. Therefore, a rapid extensigraph method was developed that reduced sample size (165 g wheat) for milling and more than tripled throughput. Wheat is milled in Quadrumat Junior mill with a modified sieving system. The resulting flour (100 g) was mixed with a pin mixer at constant water absorption to allow the evaluation of wheat genotypes at the absorption level they are expected to perform. Dough was subsequently stretched by an extensigraph after 15 min of floor time and 30 min resting. Strong correlations for extensigram Rmax (r > 0.93), extensibility (r > 0.64) and area (r > 0.88) were found for the proposed method compared to the standard method. Mixing parameters (time and energy) obtained during dough preparation provided further information about dough strength and mixing requirement. By significantly reducing sample size requirement and increasing testing throughput, this rapid extensigraph method can be widely adopted in milling and baking industry and meets the need for a fast evaluation of dough strength in breeding trials.

Necessary for Life: Studies of Ancient and Modern Grinding Stones in Highland Ethiopia

Ethnoarchaeological research combined with morphological analysis of modern and ancient grinding stones was completed in 2013 and 2014 as part of the Eastern Tigrai Archaeological Project (ETAP), based in the Gulo Makeda region of northern Ethiopia. Research focused on investigating the cultural context of grinding, grinding stone morphology, and use-surface area employing low power use-wear analysis of grinding surfaces. In the Gulo Makeda region today, men manufacture grinding stones and women use them in food processing for many hours per day. While grinding, relationships are formed and maintained with other women, and archaeological evidence suggests that women were grinding together in the past. It was discovered through interviews that distinctive grinding surfaces are preferred for processing different cereals based on grain size. Rough surfaces are used to process larger grains such as imported Near Eastern barley (Hordeum vulgare), wheat (Triticum spp.), maize (Zea mays), and the African domesticate sorghum (Sorghum bicolor), while fine/smooth surfaces are used for smaller, locally domesticated African grains including finger millet (Eleusine coracana) and t’ef (Eragrostis tef). Comparing ethnoarchaeological data with evidence of different use-surfaces on ancient Mezber grinding stones suggests that both locally domesticated and imported grains have been processed in the region for thousands of years. Interpretations are made about the use of grinding stones in the past through analogy, supported by evidence of ancient stone tool morphology and surface wear. The archaeological record at the pre-Aksumite site of Mezber indicates that grinding stone sizes have changed through time, with larger grinding surface areas likely reflecting the need for the production of greater amounts of flour.

Prebiotic flours in dairy food processing: Technological and sensory implications

This review aims to evaluate the prebiotic potential of vegetable flours in the manufacture of dairy products and their effects on technological and sensory properties. Overall, studies have shown positive results, not only with regard to the growth of the lactic and/or probiotic bacteria but also for sensory acceptance, rheological and physicochemical properties. In addition, integrated studies focusing on the development of dairy functional foods must be conducted in order to optimise the amount of flour to be added in each dairy food formulation and also to assess the impact of prebiotic flour addition on the intrinsic quality parameters of the dairy products.

The comparison of the effect of added amaranth, buckwheat, chickpea, corn, millet and quinoa flour on rice dough rheological characteristics, textural and sensory quality of bread

Gluten free (GF) flour (amaranth, buckwheat, chickpea, corn, millet and quinoa) was blended with rice flour to compare their impact on dough rheological characteristics and bread quality. The potential of some GF-rice blends in breadmaking has already been studied on blends with prevailing content of rice flour. The impact of added flour may be expected to rise with increasing amount of flour; therefore blends containing 30 g/100 g, 50 g/100 g and 70 g/100 g of GF flour in 100 g of GF-rice blend were tested. Under uniaxial deformation, peak strain was not impacted by the addition of GF flour; stress (12.3 kPa) was, however, significantly (P < 0.05) decreased (2.9–6.2 kPa). The reduction initiated by the presence of buckwheat, chickpea, quinoa and partly amaranth, together with thermally-induced dough weakening initiated by buckwheat and quinoa flour, may be related to significantly better crumb porosity. Overall acceptability of composite breads containing amaranth, chickpea and quinoa was negatively impacted by the aroma and taste of these flours. Higher potential to improve rice dough behavior and bread quality was found in the blend containing buckwheat flour (30 g/100 g; 50 g/100 g). Millet and corn flour deteriorated dough and bread quality.

Effect of the addition of peach palm (Bactris gasipaes) peel flour on the color and sensory properties of cakes

This study aimed to evaluate the color and sensorial characteristics of a cake made with different amounts of flour made with peach palm peel flour. The flour was added at different concentrations, 2.5, 5.0, 7.5, and 10% (w/w), including a control (tartrazine). Physiochemical analyses were carried out on the cakes, including total carotenoids, CIE-L*a*b* color coordinates, and sensorial attributes. The results demonstrated that the peach palm peel flour substitution increased the total carotenoid content of the cakes. The color test showed that high levels of peach palm peel flour resulted in a decrease in the values of lightness (L*) and hue angle (h°), while the values of browning index (BI) and color change (ΔE*) increased significantly. The qualification of the sensorial evaluation indicated that the quality attributes were acceptable in the cakes made with wheat flour and 7.5% peach palm peel flour. Therefore, it was concluded that flour obtained from peach palm peel is a by-product that can be used as a natural food dye alternative in bread products.

겨우살이 분말 첨가 식빵의 품질특성 및 항산화 활성

This study was carried out to investigate the quality characteristics and antioxidant activities of bread containing mistletoe (Viscum album var.) powder (at ratios of 0, 3, 5, 7, and 10% of total flour quantity). As mistletoe powder (MP) content increased, the pH levels of dough and bread and lightness decreased, whereas total titratable acidity increased. The fermentation power of the dough expansion by fermentation decreased with an increase in MP content added. Although bread weight decreased, there were no significant differences in baking loss as MP content increased. Volume and specific volume significantly decreased as MP content increased. Moisture content was highest at a substitution level of 10% and increased with increasing MP content. Lightness of crumbs significantly decreased with increasing MP content, whereas redness and yellowness showed the reverse effect. As MP content increased, changes in hardness, gumminess, and brittleness were all significant. In the sensory evaluation, color, flavor, softness, and overall acceptability were highest at MP 3% and were lowest at MP 10%. Total polyphenol contents and DPPH radical scavenging activity of bread significantly increased with increasing MP content. In conclusion, addition of MP 3% showed the best performance in terms of the nutritional and functional aspects of the bread.

테프(Eragrostis tef ) 분말을 첨가한 파운드케이크의 품질 특성 및 노화 억제 분석

This study investigated the effects of teff flour on the properties of pound cakes. Five types of pound cakes were made by addition of 0% (Control), 5% (TF5), 10% (TF10), 15% (TF15), and 20% (TF20) of teff flour based on wheat flour. Specific gravity of pound cake batter showed no significant differences among samples as 0.54 (p<0.05). Baking loss was the highest in the control at 5.92% and the lowest in TF20 at 5.27%. Batter yield was the highest in TF20 at 94.73% and the lowest in control at 94.08%. Moisture content was the highest in TF20 at 23.68% and the lowest in control at 21.32%. pH showed no significant differences among samples at 7.61∼7.65 (p<0.05). a-values of crumb significantly increased while L-values and b-values significantly decreased with added teff flour amounts. (p<0.05). ΔE values significantly increased with teff flour at 34.32∼49.24 (p<0.05). Hardness was lowest in TF20 at 180.60 g/㎠. Springiness was the lowest in TF20 at 85.37%. Cohesiveness showed no significant differences among samples (p<0.05). Chewiness was the lowest in TF20 at 172.17 g. Hardness more rapidly increased in control at 273.13∼26,123.33 g/㎠ than that of pound cakes with teff flour. Avrami exponent (n) was the highest in the control at 3.5987 and the lowest in TF20 at 1.2144. In sensory evaluation, flavor of TF20 was higher than that of the control at 4.43. Overall acceptability had a higher score in TF20 than in the control. It is considered that addition of 20% teff flour can improve the quality characteristics and retard retrogradation of pound cake.

Bread wheat milling behavior: effects of genetic and environmental factors, and modeling using grain mechanical resistance traits.

Genetic (Pinb-D1 alleles) and environment (through vitreousness) have important effects on bread wheat milling behavior. SKCS optimal values corresponding to soft vitreous or hard mealy grains were defined to obtain the highest total flour yield. Near-isogenic lines of bread wheat that differ in hardness, due to distinct puroindoline-b alleles (the wild type, Pinb-D1a, or the mutated forms, Pinb-D1b or Pinb-D1d), were grown in different environments and under two nitrogen fertilization levels, to study genetic and environmental effects on milling behavior. Milling tests used a prototype mill, equipped with two break steps, one sizing step, and two reduction steps, and this enabled 21 individual or aggregated milling fractions to be collected. Four current grain characters, thousand grain weight, test weight, grain diameter, and protein content, were measured, and three characters known to influence grain mechanical resistance, NIRS hardness, SKCS hardness index, and grain vitreousness (a character affecting the grain mechanical behavior but generally not studied). As expected, the wild type or mutated forms of Pinb-D1 alleles led to contrasted milling behavior: soft genotypes produced high quantities of break flour and low quantities of reduction flour, whereas reverse quantities were observed for hard genotypes. This different milling behavior had only a moderate influence on total flour production. NIRS hardness and vitreousness were, respectively, the most important and the second most important grain characters to explain milling behavior. However, contrary to NIRS hardness, vitreousness was only involved in endosperm reduction and not in the separation between the starchy endosperm and the outer layers. The highest flour yields were obtained for SKCS values comprised between 30 and 50, which corresponded either to soft vitreous or hard mealy grains. Prediction equations were defined and showed a good accuracy estimating break and reduction flours portions, but should be used more cautiously for total flour.

Addition of different tuna meal levels to pizza dough

Abstract The aim of this study was to develop pizza dough with different levels of tuna meal (Tunnus spp.). In order to produce tuna meal, tuna torsos without fins were used, cooked for 1 hour, pressed, milled and dehydrated for 24 hours at 60 °C. Pizza dough was produced without (0%) or with the addition of 5, 10, 15 and 20% of tuna meal, calculated based on the quantity of wheat flour. The tuna meal and different pizza pastries were analyzed for moisture content, crude protein, total lipids, ash, carbohydrates, caloric value and fatty acid profiles. Microbiological and sensory analyses were also carried out on the pizza pastries. The increasing addition of tuna meal resulted in gains in the crude protein (10.89 to 18.94%), total lipid (4.63 to 5.89%) and ash (2.54 to 3.54%) contents of the pizza pastries, not influencing the moisture content or caloric value. The inclusion of tuna meal linearly increased the quantity of n-3 series fatty acids in the pizza pastry, from 1.56 to 5.93 g/kg with the addition of 20% tuna meal. The ratio between the polyunsaturated and saturated fatty acids in the tuna meal and pizza pastries varied from 1.21 to 1.85. The microbiological analyses showed that the pizza pastries were produced under proper hygiene conditions. It was also observed that the addition of 5 to 20% of tuna meal to the pizza pastry did not significantly (p&gt;0.05) alter the parameters of aroma, flavor, overall impression and purchase intention. It was therefore concluded that the addition of 5 to 20% tuna meal is effective in improving the nutritional value and fatty acid profile of pizza pastry.

Influence of potato flour on dough rheological properties and quality of steamed bread

It is a novel idea to make steamed bread by adding potato flour into wheat flour considering the production and nutritional factors of potato. In this study, the influence of potato flour (0–35%) on dough rheology and quality of steamed bread were investigated. Potato flour addition significantly influenced the dough rheological properties and steamed bread quality, such as increased water absorption, the maximum gaseous release height, total volume of CO2 and hardness, while decreased dough stability and specific volume of steamed bread. Moreover, correlation analysis suggested that dough height at the maximum development time, dough stability, water absorption and the phase tangent can be used for predicting the technological quality of steamed bread. Potato-wheat steamed bread had higher dietary fibre, ash content and antioxidant activity than those of wheat steamed bread. The estimated glycemic index decreased from 73.63 (0%) to 60.01 (35%). Considering the sensory evaluation, the steamed bread with 20% potato flour is acceptable. In conclusion, adding appropriate quantity of potato flour to wheat flour for steamed bread production will not only maintain the technological quality, but also can improve the nutritional value of the steamed bread.