Purification Of Recombinant Proteins Research Articles

Robust production of active Ulp1 (SUMO protease) from inclusion bodies

High yield purification of Ulp1 is required during the isolation and purification of SUMO-tagged recombinant proteins. However, when expressed as a soluble protein, Ulp1 is toxic to E. coli host cells and most of the protein forms inclusion bodies. The extraction of insoluble Ulp1 followed by its purification and refolding into its active form is a lengthy and costly procedure. In our present study, we developed a simple, cost effective procedure for the large scale production of active Ulp1 that can be used for industrial scale requirements.

Chitin‐ and Streptavidin‐Mediated Affinity Purification Systems: A Screening Platform for Enzyme Discovery

AbstractAffinity purification of recombinant proteins is an essential technique in biotechnology. However, current affinity purification methods are very cost‐intensive, and this imposes limits on versatile use of affinity purification for obtaining purified proteins for a variety of applications. To overcome this problem, we developed a new affinity purification system which we call CSAP (chitin‐ and streptavidin‐mediated affinity purification) for low‐cost purification of Strep‐tag II fusion proteins. The CSAP system is designed to utilize commercially available chitin powder as a chromatography matrix, thereby significantly improving the cost‐efficiency of protein affinity purification. We investigated the CSAP system for protein screening in 96‐well format as a demonstration. Through the screening of 96 types of purified hemoproteins, several proteins capable of the catalytic diastereodivergent synthesis of cyclopropanes were identified as candidates for an abiotic carbene transfer reaction.

Chitin- and Streptavidin-Mediated Affinity Purification Systems: A Screening Platform for Enzyme Discovery.

Affinity purification of recombinant proteins is an essential technique in biotechnology. However, current affinity purification methods are very cost intensive, and this imposes limits on versatile use of affinity purification for obtaining purified proteins for a variety of applications. To overcome this problem, we developed a new affinity purification system which we call CSAP (chitin- and streptavidin-mediated affinity purification) for low-cost purification of Strep-tag II fusion proteins. The CSAP system is designed to utilize commercially available chitin powder as a chromatography matrix, thereby significantly improving the cost-efficiency of protein affinity purification. We investigated the CSAP system for protein screening in 96-well format as a demonstration. Through the screening of 96 types of purified hemoproteins, several proteins capable of the catalytic diastereo-divergent synthesis of cyclopropanes were identified as candidates for an abiotic carbene transfer reaction.

Adaptation of the binding domain of Lactobacillus acidophilus S-layer protein as a molecular tag for affinity chromatography development.

The S-layer proteins are a class of self-assembling proteins that form bi-dimensional lattices named S-Layer on the cell surface of bacteria and archaea. The protein SlpA, which is the major constituent of the Lactobacillus acidophilus S-layer, contains in its C-terminus region (SlpA284 - 444), a protein domain (named here as SLAPTAG) responsible for the association of SlpA to the bacterial surface. SLAPTAG was adapted for the development of a novel affinity chromatography method: the SLAPTAG-based affinity chromatography (SAC). Proteins with different molecular weights or biochemical functions were fused in-frame to the SLAPTAG and efficiently purified by a Bacillus subtilis-derived affinity matrix (named Bio-Matrix or BM). Different binding and elution conditions were evaluated to establish an optimized protocol. The binding equilibrium between SLAPTAG and BM was reached after a few minutes of incubation at 4°C, with an apparent dissociation constant (KD) of 4.3μM. A reporter protein (H6-GFP-SLAPTAG) was used to compare SAC protein purification efficiency against commercial immobilized metal affinity chromatography. No differences in protein purification performance were observed between the two methods. The stability and reusability of the BM were evaluated, and it was found that the matrix remained stable for more than a year. BM could be reused up to five times without a significant loss in performance. Additionally, the recovery of bound SLAP-tagged proteins was explored using proteolysis with a SLAP-tagged version of the HRV-3c protease (SLAPASE). This released the untagged GFP while the cut SLAPTAG and the SLAPASE were retained in the BM. As an alternative, iron nanoparticles were linked to the BM, resulting in BMmag. The BMmag was successfully adapted for a magnetic SAC, a technique with potential applications in high-throughput protein production and purification. The SAC protocol can be adapted as a universal tool for the purification of recombinant proteins. Furthermore, the SAC protocol utilizes simple and low-cost reagents, making it suitable for in-house protein purification systems in laboratories worldwide. This enables the production of pure recombinant proteins for research, diagnosis, and the food industry.

Protein engineering of a nanoCLAMP antibody mimetic scaffold as a platform for producing bioprocess-compatible affinity capture ligands

Protein A affinity chromatography is widely used for the large-scale purification of antibodies because of its high yield, selectivity, and compatibility with NaOH sanitation. A general platform to produce robust affinity capture ligands for proteins beyond antibodies would improve bioprocessing efficiency. We previously developed nanoCLAMPs (nano Clostridial Antibody Mimetic Proteins), a class of antibody mimetic proteins useful as lab-scale affinity capture reagents. This work describes a protein engineering campaign to develop a more robust nanoCLAMP scaffold compatible with harsh bioprocessing conditions. The campaign generated an improved scaffold with dramatically improved resistance to heat, proteases, and NaOH. To isolate additional nanoCLAMPs based on this scaffold, we constructed a randomized library of 1× 1010 clones and isolated binders to several targets. We then performed an in-depth characterization of nanoCLAMPs recognizing yeast SUMO, a fusion partner used for the purification of recombinant proteins. These second-generation nanoCLAMPs typically had a Kd of <80nM, a Tm of >70 °C, and a t1/2 in 0.1mg/ml trypsin of >20h. Affinity chromatography resins bearing these next-generation nanoCLAMPs enabled single-step purifications of SUMO fusions. Bound target proteins could be eluted at neutral or acidic pH. These affinity resins maintained binding capacity and selectivity over 20 purification cycles, each including 10min of cleaning-in-place with 0.1M NaOH, and remained functional after exposure to 100% DMF and autoclaving. The improved nanoCLAMP scaffold will enable the development of robust, high-performance affinity chromatography resins against a wide range of protein targets.

Effect of the Competing Ligand on Ni-NTA/Histag Strength Revealed by Click Chemistry-Based Force Spectroscopy.

The specific interaction between Ni-nitrilotriacetic acid and the six-histidine tag may be one of the most important coordination bonds utilized in biological research because of its wide application for recombinant protein purification. The complex stability is critical for target protein binding. Thus, measurement of the mechanical stability of the system was attempted soon after the invention of atomic force microscopy-based single-molecule force spectroscopy (AFM-SMFS) two decades ago. Moreover, the competing ligand imidazole and protons are the two critical factors for target protein elution. However, the mechanochemistry between the system and the imidazole/proton has not been determined. Here, an AFM-SMFS system using strain-promoted alkyne-azide cycloaddition and Cu-free click chemistry was used to characterize the system. Consequently, the destabilizing effect of the imidazole and proton on the interaction was revealed quantitatively, leading to a 3-fold increase in the bond dissociation rate.

Potent Antifungal Functions of a Living Modified Organism Protein, CP4-EPSPS, against Pathogenic Fungal Cells.

Various proteins introduced into living modified organism (LMO) crops function in plant defense mechanisms against target insect pests or herbicides. This study analyzed the antifungal effects of an introduced LMO protein, 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS) from Agrobacterium sp. strain CP4 (CP4-EPSPS). Pure recombinant CP4-EPSPS protein, expressed in Escherichia coli, inhibited the growth of human and plant fungal pathogens (Candida albicans, C. tropicalis, C. krusei, Colletotrichum gloeosporioides, Fusarium solani, F. graminearum, and Trichoderma virens), at minimum inhibitory concentrations (MICs) that ranged from 62.5 to 250 µg/mL. It inhibited fungal spore germination as well as cell proliferation on C. gloeosporioides. Rhodamine-labeled CP4-EPSPS accumulated on the fungal cell wall and within intracellular cytosol. In addition, the protein induced uptake of SYTOX Green into cells, but not into intracellular mitochondrial reactive oxygen species (ROS), indicating that its antifungal action was due to inducing the permeability of the fungal cell wall. Its antifungal action showed cell surface damage, as observed from fungal cell morphology. This study provided information on the effects of the LMO protein, EPSPS, on fungal growth.

Effects of His-Tag Length on the Soluble Expression and Selective Immobilization of D-Amino Acid Oxidase from Trigonopsis variabilis: A Preliminary Study

His-tags are widely used for the purification of recombinant proteins. High-cost carriers functionalized with nickel ions are commonly required for the selective immobilization of His-tagged enzymes. In this study, His-tags of varying lengths were fused to the N-terminus of D-amino acid oxidase (DAO) from Trigonopsis variabilis. The attachment of a His6 tag significantly improved the solubility of the recombinant DAO expressed in Escherichia coli. By modulating the tag lengths, a better balance between cell growth and protein solubility was achieved, resulting in a higher volume activity (His3). Furthermore, the fusion of longer tags (His6 and His9) facilitated the rapid immobilization of DAOs onto a commercial epoxy carrier without metal bearing, resulting in more selective immobilization. In conclusion, the modulation of His-tag length was preliminarily demonstrated as a simple and cost-effective approach to achieve efficient expression, as well as fast and selective immobilization of DAO.

Expression, purification, and biological characterization of recombinant human interleukin-31 protein.

Interleukin-31 (IL-31), belonging to the IL-6 cytokine family, is involved in skin inflammation and pruritus, as well as some tumors' progression. Here, we reported the expression and purification of recombinant human IL-31 (rhIL-31) using a prokaryotic system. This recombinant protein was expressed in the form of inclusion bodies, refolded and purified by size-exclusion chromatography. Circular dichroism analysis revealed that the secondary structure of rhIL-31 was mainly composed of alpha-helix, which is in consistence with the 3D model structure built by AlphaFold server. In vitro studies showed that rhIL-31 exhibited a good binding ability to the recombinant hIL-31 receptor alpha fused with human Fc fragment (rhIL-31RA-hFc) with EC50 value of 16.36µg/mL in ELISA assay. Meanwhile, flow cytometry demonstrated that rhIL-31 was able to bind to hIL-31RA or hOSMRβ expressed on the cell surface, independently. Furthermore, rhIL-31 could induce the phosphorylation of STAT3 in A549 cells. In conclusion, the prepared rhIL-31 in this study possesses the binding ability to its receptors, and can activate the signal pathway of JAK/STAT. Thus, it can be applied in further studies, including investigation of hIL-31-related diseases, structural analysis, and development of therapeutic drugs, and monoclonal antibodies targeting hIL-31.

A systematic review about affinity tags for one-step purification and immobilization of recombinant proteins: integrated bioprocesses aiming both economic and environmental sustainability.

The present study reviewed and discussed the promising affinity tags for one-step purification and immobilization of recombinant proteins. The approach used to structure this systematic review was The Preferred Reporting Items for Systematic Review and Meta-analysis (PRISMA) methodology. The Scopus and Web of Science databases were used to perform the bibliographic survey by which 267 articles were selected. After the inclusion/exclusion criteria and the screening process, from 25 chosen documents, we identified 7 types of tags used in the last 10years, carbohydrate-binding module tag (CBM), polyhistidine (His-tag), elastin-like polypeptides (ELPs), silaffin-3-derived pentalysine cluster (Sil3k tag), N-acetylmuramidase (AcmA tag), modified haloalkane dehalogenase (HaloTag®), and aldehyde from a lipase polypeptide (Aldehyde tag). The most used bacterial host for expressing the targeted protein was Escherichia coli and the most used expression vector was pET-28a. The results demonstrated two main immobilization and purification methods: the use of supports and the use of self-aggregating tags without the need of support, depending on the tag used. Besides, the chosen terminal for cloning the tag proved to be very important once it could alter enzyme activity. In conclusion, the best tag for protein one-step purification and immobilization was CBM tag, due to the eco-friendly supports that can be provided from industry wastes, the fast immobilization with high specificity, and the reduced cost of the process.

Efficient Purification of Polyhistidine-Tagged Recombinant Proteins Using Functionalized Corundum Particles.

Immobilized metal affinity chromatography (IMAC) is a popular and valuable method for the affinity purification of polyhistidine-tagged recombinant proteins. However, it often shows practical limitations, which might require cumbersome optimizations, additional polishing, and enrichment steps. Here, we present functionalized corundum particles for the efficient, economical, and fast purification of recombinant proteins in a column-free format. The corundum surface is first derivatized with the amino silane APTES, then EDTA dianhydride, and subsequently loaded with nickel ions. The Kaiser test, well known in solid-phase peptide synthesis, was used to monitor amino silanization and the reaction with EDTA dianhydride. In addition, ICP-MS was performed to quantify the metal-binding capacity. His-tagged protein A/G (PAG), mixed with bovine serum albumin (BSA), was used as a test system. The PAG binding capacity was around 3 mg protein per gram of corundum or 2.4 mg per 1 mL of corundum suspension. Cytoplasm obtained from different E. coli strains was examined as examples of a complex matrix. The imidazole concentration was varied in the loading and washing buffers. As expected, higher imidazole concentrations during loading are usually beneficial when higher purities are desired. Even when higher sample volumes, such as one liter, were used, recombinant protein down to a concentration of 1 µg/mL could be isolated selectively. Comparing the corundum material with standard Ni-NTA agarose beads indicated higher purities of proteins isolated using corundum. His6-MBP-mSA2, a fusion protein consisting of monomeric streptavidin and maltose-binding protein in the cytoplasm of E. coli, was purified successfully. To show that this method is also suitable for mammalian cell culture supernatants, purification of the SARS-CoV-2-S-RBD-His8 expressed in human Expi293F cells was performed. The material cost of the nickel-loaded corundum material (without regeneration) is estimated to be less than 30 cents for 1 g of functionalized support or 10 cents per milligram of isolated protein. Another advantage of the novel system is the corundum particles' extremely high physical and chemical stability. The new material should be applicable in small laboratories and large-scale industrial applications. In summary, we could show that this new material is an efficient, robust, and cost-effective purification platform for the purification of His-tagged proteins, even in challenging, complex matrices and large sample volumes of low product concentration.

Enhancement of Chlorella transformation efficacy by insert fragmentation

Chlorella vulgaris, a microalga used to produce recombinant proteins, has several advantages as a bioreactor including ease of post-transitional modifications, low cost of mass culture, and a simple cell structure, and the latter facilitates purification of recombinant proteins. However, the development of efficient transformation methods based on useful selection markers, increased expression, and stability of integrated foreign DNA are still required. In this study, a transformation method for C. vulgaris has been developed in which the wild-type nitrate reductase (NR) gene is knocked out by triple homologous recombination using two overlapping DNA fragments flanked by the upstream and downstream NR fragments, respectively, to enhance the transformation efficiency. Knockout of NR gene enabled screening of transformed cells on plates containing 200 mM KClO3, which is reduced to chlorite, a compound toxic only to wild-type C. vulgaris. Randomly selected cells showed 70 % integration of the target DNA and expression of the foreign protein. We also optimized the culture medium, in which transformed Chlorella reached a density of 108 cells/mL. The integrated DNA was detected after long-term continuous subculture without loss even in the absence of KClO3 selection pressure.

Analysis of histidine-tagged recombinant proteins from nickel and copper coated surfaces by direct electrospray ionization and desorption electrospray ionization mass spectrometry.

Purification of recombinant proteins is a necessary step for functional or structural studies and other applications. Immobilized metal affinity chromatography is a common recombinant protein purification method. Mass spectrometry (MS) allows for confirmation of identity of expressed proteins and unambiguous detection of enzymatic substrates and reaction products. We demonstrate the detection of enzymes purified on immobilized metal affinity surfaces by direct or ambient ionization MS, and follow their enzymatic reactions by direct electrospray ionization (ESI) or desorption electrospray ionization (DESI). A protein standard, His-Ubq, and two recombinant proteins, His-SHAN and His-CS, expressed in Escherichia coli were immobilized on two immobilized metal affinity systems, Cu-nitriloacetic acid (Cu-NTA) and Ni-NTA. The proteins were purified on surface, and released in the ESI spray solvent for direct infusion, when using the 96-well plate form factor, or analyzed directly from immobilized metal affinity-coated microscope slides by DESI-MS. Enzyme activity was followed by incubating the substrates in wells or by depositing substrate on immobilized protein on coated slides for analysis. Small proteins (His-Ubq) and medium proteins (His-SAHN) could readily be detected from 96-well plates by direct infusion ESI, or from microscope slides by DESI-MS after purification on surface from clarified E. coli cell lysate. Protein oxidation was observed for immobilized proteins on both Cu-NTA and Ni-NTA; however, this did not hamper the enzymatic reactions of these proteins. Both the nucleosidase reaction products for His-SAHN and the methylation product of His-CS (theobromine to caffeine) were detected. The immobilization, purification, release and detection of His-tagged recombinant proteins using immobilized metal affinity surfaces for direct infusion ESI-MS or ambient DESI-MS analyses were successfully demonstrated. Recombinant proteins were purified to allow identification directly out of clarified cell lysate. Biological activities of the recombinant proteins were preserved allowing the investigation of enzymatic activity via MS.

Identification and characterization of a novel lytic peptidoglycan transglycosylase (MltC) in Shigella dysenteriae.

Shigellosis remains a worldwide health problem due to the lack of vaccines and the emergence of antibiotic-resistant strains. Shigella (S.) dysenteriae has rigid peptidoglycan (PG), and its tight regulation of biosynthesis and remodeling is essential for bacterial integrity. Lytic transglycosylases are highly conserved PG autolysins in bacteria that play essential roles in bacterial growth. However, their precise functions are obscure. We aimed to identify, clone, and express MltC, a unique autolysin in Escherichia (E.) coli C41 strain. The purification of recombinant MltC protein was performed using affinity chromatography and size-exclusion chromatography methods. The PG enzymatic activity of MltC was investigated using Zymogram and Fluorescein isothiocyanate (FITC)-labeled PG assays. Also, we aimed to detect its localization in bacterial fractions (cytoplasm and membrane) by western blot using specific polyclonal anti-MltC antibodies and its probable partners using immunoprecipitation and mass spectrometry applications. Purified MltC showed autolysin activity. Native MltC showed various locations in S. dysenteriae cells during different growth phases. In the Lag and early stationary phases, MltC was not found in cytoplasm and membrane fractions. However, it was detected in cytoplasm and membrane fractions during the exponential phase. In the late stationary phase, MltC was expressed in the membrane fraction only. Different candidate protein partners of MltC were identified that could be essential for bacterial growth and pathogenicity. This is the first study to suggest that MltC is indeed autolysin and could be a new drug target for the treatment of shigellosis by understanding its biological functions.

Mechanism of imidazole inhibition of a GH1 β-glucosidase.

Imidazole is largely employed in recombinant protein purification, including GH1 β-glucosidases, but its effect on the enzyme activity is rarely taken into consideration. Computational docking suggested that imidazole interacts with residues forming the active site of the GH1 β-glucosidase from Spodoptera frugiperda (Sfβgly). We confirmed this interaction by showing that imidazole reduces the activity of Sfβgly, which does not result from enzyme covalent modification or promotion of transglycosylation reactions. Instead, this inhibition occurs through a partial competitive mechanism. Imidazole binds to the Sfβgly active site, reducing the substrate affinity by about threefold, whereas the rate constant of product formation remains unchanged. The binding of imidazole within the active site was further confirmed by enzyme kinetic experiments in which imidazole and cellobiose competed to inhibit the hydrolysis of p-nitrophenyl β-glucoside. Finally, imidazole interaction in the active site was also demonstrated by showing that it hinders access of carbodiimide to the Sfβgly catalytic residues, protecting them from chemical inactivation. In conclusion, imidazole binds in the Sfβgly active site, generating a partial competitive inhibition. Considering that GH1 β-glucosidases share conserved active sites, this inhibition phenomenon is probably widespread among these enzymes, and this should be taken into account when considering the characterization of their recombinant forms.

Integrated approaches for the separation and purification of recombinant HPV16 E6 protein from Escherichia coli crude extracts

Human papillomavirus (HPV) is a sexually transmissible virus responsible for 5% of global human cancers and associated with 99% of cervical cancer cases. The oncogenic potential of high-risk HPVs is mainly related to the E6 and E7 oncoproteins, which are responsible, at least in part, for inactivating the p53 and pRb tumor suppressor proteins. Due to the critical role of the E6 protein in malignant tumorigenesis, it is widely recognized as a therapeutic target for anti-HPV drug development. Nevertheless, it is required to obtain large amounts of protein with high purity to perform biointeraction studies with the potential inhibitor drugs. In this work, recombinant dual-tagged E6 protein (His6-MBP-E6) was expressed from Escherichia coli (E. coli) cultures and successfully extracted by sonication/ice cycles. Affinity chromatography using MBPtrap columns allowed 85 ± 5% protein recovery with the elimination of major host heterologous proteins in a single fraction. Subsequently, a polishing step was studied by applying anionic exchange (QSepharose), size exclusion (Superdex), or immobilized-metal affinity chromatography (HisTrap). The combination of affinity chromatography with size exclusion or two affinity chromatography techniques allowed us to obtain 82 ± 2% and 94 ± 3%, of highly pure His6-MBP-E6, respectively. Also, the secondary structure of His6-MBP-E6 is preserved in both purification strategies, as appraised by circular dichroism and western-blot studies. Thermal shift assay confirmed the CD results and suggested potential additives for protein stabilization. Altogether, the reproducible strategies established for the purification of His6-MBP-E6 protein could be successfully applied to later perform biointeraction studies and structural characterization of protein–ligand complexes.

Label‐Free Fluorescence Turn‐On Detection of Histidine‐Tagged Proteins Based on Intramolecular Rigidification Induced Emission

AbstractHistidine tag (His‐tag) is a representative epitope tag, which has been widely used in the purification or immobilization of recombinant proteins. In this study, a novel probe CTPE‐IDA‐Ni2+ based on intramolecular rigidification induced emission for fluorescence detecting His‐tagged proteins is successfully developed and experimentally demonstrated. This detecting system is based on TPE derivative incorporated IDA‐Ni2+ moiety for real‐time detection of His‐tagged proteins. In the presence of His‐tagged proteins, the IDA‐Ni2+‐His‐tag complex was formed, which restricted the rotation of two phenyl rings linked with TPE and subsequently resulting in the fluorescence turn on. Results have shown that our probe could directly detect His‐tagged proteins with good selectivity and fast response within 10 min. In addition, we have proved that this system could be used in fluorescent labeling of His‐tagged protein instead of traditional Western blot assay with simple procedure, high quality and low background interference, as well as without aggregation‐caused quenching (ACQ) problems like some organic dyes.

DNA aptamer-based affinity chromatography system for purification of recombinant proteins tagged with lysine tag

Affinity chromatography (AC) is one of the techniques widely used for the purification of recombinant proteins. In our previous study, we presented a successful application of the Argi system [1] for the purification of recombinant proteins, based on the specific interaction between an arginine tag and a DNA aptamer. Exploring the possible application of positively charged peptide tags in the purification of recombinant proteins, in this study we developed and characterized an AC system based on the specific and reversible interaction between a DNA aptamer and a lysine tag (Lys-tag) comprising five lysine residues (5 K). We optimized the length of both the selected DNA aptamer and Lys-tag which were named B5K aptamer and 5K-tag, respectively. The results showed that the stability of the B5K aptamer and 5K-tag was dependent on the presence of potassium ions. The conditions for mild elution of 5K-tagged protein from B5K aptamer were determined. Our study proved that the developed system can be used for the purification of recombinant proteins from Escherichia coli total protein extracts.

Immunosensor for realtime monitoring of the expression of recombinant proteins during bioprocess

Recombinant protein expression and purification are crucial in modern life sciences research. A fluorescent immunosensor termed Quenchbody (Q-body) was developed for real-time monitoring of FLAG-fused protein expression. Detection results showed that the limit of detection of the 3 × FLAG peptide detected by the TAMRA-labeled anti-FLAG Q-body was as low as 3.1 nM, with a half-maximal effective concentration of 21.4 nM. Furthermore, the anti-FLAG Q-body was used for detecting different proteins fused with a FLAG-tag at the N- or C-terminal. Subsequently, the constructed Q-body was used to monitor the real-time fermentation process of single-strand DNA-binding protein in Escherichia coli. Unlike previously reported Q-bodies that widely used Fab or scFv, the present study used a full-length anti-FLAG IgG for the first time. Owing to its excellent detection speed and sensitivity, the FLAG Q-body immunosensor has the potential to quantify and monitor target recombinant proteins in multiple biological processes in real-time.

Immunization of mice with chimeric protein-loaded aluminum hydroxide and selenium nanoparticles induces reduction of Brucella melitensis infection in mice.

Due to the many problems with commercially available vaccines, the production of effective vaccines against brucellosis is a necessity. The aim of this study was to evaluate the immune responses caused by the chimeric protein consisting of trigger factor, Bp26, and Omp31 (TBO) along with aluminum hydroxide (AH/TBO) and selenium (Se/TBO) nanoparticles (NPs) as adjuvants in mouse model. Recombinant antigen expression was induced in Escherichia coli BL21 (DE3) bacteria using IPTG (isopropyl-d-1-thiogalactopyranoside). Purification and characterization of recombinant protein was conducted through NiFe3O4 NPs, sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and Western blot. NP characteristics, including morphology and particle size, were measured in vitro. The recombinant TBO was loaded on to AH and Se NPs and were administered subcutaneously. After mice immunization, measurement of antibody titter and protection assay was performed. The average sizes of AH and Se NPs were about 60 nm and 150 nm, respectively. The enzyme-linked immunosorbent assay results showed that the serum of mice immunized by subcutaneous injection with both nanovaccines produced significant immunoglobulin G (IgG) responses against the chimeric antigen. The results of TBO-specific IgG isotype (IgG2a/IgG1) analysis showed that both AH and Se NPs induced a type to T-helper immune response. In addition, the results of the challenge with the pathogenic strain of Brucella melitensis 16M showed that vaccinated mice with AH/TBO NPs indicated a higher reduction of bacterial culture than immunized mice with Se/TBO NPs and TBO alone. The results showed that AH NPs carrying chimeric antigen can be a promising vaccine candidate against brucellosis by producing protective immunity.