Dentin-pulp Complex Research Articles

Dentin-Pulp Complex Tissue Regeneration via Three-Dimensional Cell Sheet Layering.

The dentin-pulp complex is a unique structure in teeth that contains both hard and soft tissues. Generally, deep caries and trauma cause damage to the dentin-pulp complex, and if left untreated, this damage will progress to irreversible pulpitis. The aim of this study was to fabricate a layered cell sheet composed of rat dental pulp (DP) cells and odontogenic differentiation of pulp (OD) cells and to investigate the ability to regenerate the dentin-pulp complex in a scaffold tooth. We fabricated two single cell sheets composed of DP cells (DP cell sheet) or OD cells (OD cell sheet) and a layered cell sheet made by layering both cells. The characteristics of the fabricated cell sheets were analyzed using light microscopy, scanning electron microscope (SEM), hematoxylin-eosin (HE) staining, and immunohistochemistry (IHC). Furthermore, the cell sheets were transplanted into the subrenal capsule of immunocompromised mice for 8 weeks. After this, the regenerative capacity to form dentin-like tissue was evaluated using micro-computed tomography (micro-CT), HE staining, and IHC. The findings of SEM and IHC confirmed that layered cell sheets fabricated by stacking OD cells and DP cells maintained their cytological characteristics. Micro-CT of layered cell sheet transplants revealed a mineralized capping of the access cavity in the crown area, similar to that of natural dentin. In contrast, the OD cell sheet group demonstrated the formation of irregular fragments of mineralized tissue in the pulp cavity, and the DP cell sheet did not develop any hard tissue. Moreover, bone volume/tissue volume (BV/TV) showed a significant increase in hard tissue formation in the layered cell sheet group compared with that in the single cell sheet group (p < 0.05). HE staining also showed a combination of soft and hard tissue formation in the layered cell sheet group. Furthermore, IHC confirmed that the dentin-like tissue generated from the layered cell sheet expressed characteristic markers of dentin but not bone equivalent to that of a natural tooth. In conclusion, this study demonstrates the feasibility of regenerating dentin-pulp complex using a bioengineered tissue designed to simulate the anatomical structure. Impact statement The dentin-pulp complex can be destroyed by deep caries and trauma, which may cause pulpitis and progress to irreversible pulpitis, apical periodontitis, and even tooth loss. Current treatments cannot maintain pulp health, and teeth can become brittle. We developed a three-dimensional (3D) layered cell sheet using dental pulp cells and odontogenic differentiation of pulp cells for dentin-pulp complex regeneration. Our layered cell sheet enables the regeneration of an organized 3D dentin-pulp-like structure comparable with that of natural teeth. This layered cell sheet technology may contribute to dentin-pulp complex regeneration and provide a novel method for complex tissue engineering.

Cell-Based Transplantation versus Cell Homing Approaches for Pulp-Dentin Complex Regeneration.

Regenerative dentistry has paved the way for a new era for the replacement of damaged dental tissues. Whether the causative factor is dental caries, trauma, or chemical insult, the loss of the pulp vitality constitutes one of the major health problems worldwide. Two regenerative therapies were introduced for a fully functional pulp-dentin complex regeneration, namely, cell-based (cell transplantation) and cell homing (through revascularization or homing by injection of stem cells in situ or intravenously) therapies, with each demonstrating advantages as well as drawbacks, especially in clinical application. The present review is aimed at elaborating on these two techniques in the treatment of irreversibly inflamed or necrotic pulp, which is aimed at regenerating a fully functional pulp-dentin complex.

Neu5Ac Induces Human Dental Pulp Stem Cell Osteo-/Odontoblastic Differentiation by Enhancing MAPK/ERK Pathway Activation.

Dental pulp stem cells (DPSCs) must undergo odontoblastic differentiation in order to facilitate the process of dentin-pulp complex repair. Herein, we sought to explore the ability of Neu5Ac (one form of sialic acid) to influence DPSC osteo-/odontoblastic differentiation via modulating mitogen-activated protein kinase (MAPK) signaling. Methodology. DPSCs were isolated from human third permanent teeth and were grown in vitro. Fluorescent microscopy was used to detect the existence of sialic acid on the DPSC membrane. Following the treatment of different concentrations of Neu5Ac and removing sialic acid from the cell surface by neuraminidase, the osteo-/odontoblastic differentiation of these cells was evaluated via mineralization, alkaline phosphatase, and in vivo assays. In addition, the expression of genes related to osteo-/odontoblastic differentiation and MAPK signaling at different stages of this differentiation process was analyzed in the presence or absence of Neu5Ac. Results. The existence of sialic acid on the DPSC membrane was confirmed by fluorescent microscopy, and the ability of osteo-/odontoblastic differentiation was decreased after removing sialic acid by neuraminidase. Treatment of DPSCs with Neu5Ac (0.1 mM or 1 mM) significantly enhanced their mineralization ability and alkaline phosphatase activity. The expression levels of DMP1, DSPP, BSP, and RUNX2 were also increased. Treatment of nude mice with ManNAc (the prerequisite form of Neu5Ac) also enhanced DPSC mineralization activity in vivo. Furthermore, Neu5Ac treatment enhanced p-ERK expression in DPSCs, while ERK pathway inhibition disrupted the ability of Neu5Ac to enhance the osteo-/odontoblastic differentiation of these cells. Conclusions. Neu5Ac can promote DPSC osteo-/odontoblastic differentiation through a process associated with the modulation of the ERK signaling pathway activity.

Phosphorylated PAMAM dendrimers: an analog of dentin non-collagenous proteins, enhancing the osteo/odontogenic differentiation of dental pulp stem cells.

Polyamidoamine (PAMAM) dendrimers have well-defined structures, with monodispersity and easily modified surface groups, and they have broad applications in biomedicine. In this study, phosphorylated PAMAM (P-PAMAM) dendrimers were synthesized based on the idea of mimicking the phosphorylated proteins of dentin non-collagenous proteins (DNCP). Then, proliferation and osteo/odontogenic differentiation effects of P-PAMAM on dental pulp stem cells (DPSCs) were investigated and were compared with DNCP. P-PAMAM was synthesized via the Mannich-type reaction. DNCP were extracted directly from human dentin with ethylenediaminetetraacetic acid (EDTA) solution. Then, the conditioned medium of P-PAMAM and DNCP were prepared respectively and applied to DPSCs. Proliferation of P-PAMAM was investigated with CCK-8, flow cytometry, and EdU test. Osteo/odontogenic differentiation of P-PAMAM was analyzed using alkaline phosphatase activity and staining, RT-PCR, western blot, alizarin red staining, and immunofluorescence staining. Fourier transform infrared spectroscopy and 1H nuclear magnetic resonance revealed that PAMAM were successfully phosphorylated. Western blot verified that the extracted DNCP contained dentin-related proteins DSPP, OPN, and BMP2. In cell proliferation, there was no apparent difference between P-PAMAM, DNCP, and Control groups (P > 0.05). P-PAMAM and DNCP upregulated related genes and proteins expression (DSPP/DSPP, COL-1/COL-1, ALP/ALP, RUNX2/RUNX2, OSX/OSX, OCN/OCN) and matrix mineralization. Still, the potential was lower than that of DNCP (P < 0.05). P-PAMAM dendrimers, as a biomimetic analog of DNCP, promote osteo/odontogenic differentiation of DPSCs without influencing their proliferation at a low concentration. This preliminary study about P-PAMAM dendrimers is expected to provide a more convenient bioactive macromolecular material for the regeneration of the pulp-dentin complex.

Expression of nitric oxide synthases in rat odontoblasts and the role of nitric oxide in odontoblastic differentiation of rat dental papilla cells.

As precursor cells of odontoblasts, dental papilla cells (DPCs) form the dentin-pulp complex during tooth development. Nitric oxide (NO) regulates the functions of multiple cells and organ tissues, including stem cell differentiation and bone formation. In this paper, we explored the involvement of NO in odontoblastic differentiation. We verified the expression of NO synthase (NOS) in rat odontoblasts by nicotinamide adenine dinucleotide phosphate-diaphorase (NADPH-d) staining and immunohistochemistry in vivo. The expression of all three NOS isoforms in rat DPCs was confirmed by quantitative reverse-transcription polymerase chain reaction (qRT-PCR), immunofluorescence, and western blotting in vitro. The expression of neuronal NOS and endothelial NOS was upregulated during the odontoblastic differentiation of DPCs. Inhibition of NOS function by NOS inhibitor l-NG -monomethyl arginine (L-NMMA) resulted in reduced formation of mineralized nodules and expression of dentin sialophosphoprotein (DSPP) and dentin matrix protein (DMP1) during DPC differentiation. The NO donor S-nitroso-N-acetylpenicillamine (SNAP, 0.1, 1, 10, and 100μM) promoted the viability of DPCs. Extracellular matrix mineralization and odontogenic markers expression were elevated by SNAP at low concentrations (0.1, 1, and 10μM) and suppressed at high concentration (100μM). Blocking the generation of cyclic guanosine monophosphate (cGMP) with 1H-(1,2,4)oxadiazolo-(4,3-a)quinoxalin-1-one (ODQ) abolished the positive influence of SNAP on the odontoblastic differentiation of DPCs. These findings demonstrate that NO regulates the odontoblastic differentiation of DPCs, thereby influencing dentin formation and tooth development.

Synthesis, characterization, and evaluation of curcumin-loaded endodontic reparative material.

Curcumin (CUR) is an ancient therapeutic agent with remarkable antimicrobial and anti-inflammatory properties. The purpose of the current study was to synthesize and evaluate a curcumin-based reparative endodontic material to reduce infection and inflammation besides the induction of mineralization during the healing of the dentin-pulp complex. Poly-ɛ-caprolactone (PCL)/gelatin (Gel)/CUR scaffold was synthesized and assessed by scanning electron microscopy, Fourier transform infrared spectroscopy, and thermo-gravimetric analysis (TGA). Agar diffusion test was performed against E. coli, A. baumannii, P. aeruginosa, S. aureus, E. faecalis, and S. mutans. Moreover, proliferative, antioxidative, anti-inflammatory, and calcification properties of these scaffolds on human dental pulp stem cells (hDPSCs) were evaluated. The results showed that PCL/Gel/CUR scaffold had antibacterial effects. Also, these CUR-based scaffolds had significant inhibitory effects on the expression of tumor necrosis factor α and DCF from inflamed hDPSCs (p < 0.05). Moreover, the induction of mineralization in hDPSCs significantly increased after seeding on CUR-based scaffolds (p < 0.05). Based on these findings, the investigated CUR-loaded material was fabricated successfully and provided an appropriate structure for the attachment and proliferation of hDPSCs. It was found that these scaffolds had antimicrobial, antioxidant, and anti-inflammatory characteristics and could induce mineralization in hDPSCs, which is essential for healing and repairing the injured dentin-pulp complex.

From Endodontic Therapy to Regenerative Endodontics: New Wine in Old Bottles.

The concept of regenerative endodontics wherein one can replace damaged pulp structures and recuperate the functionality in erstwhile necrotic and infected root canal systems has been a cutting-edge technology. Though the notion started as early as the 1960s, even before the discovery of stem cells and regenerative medicine, it was in the 2000s that this procedure gained momentum. Ever since then, researchers continue to discover its essential benefit to immature teeth and its ability to overcome the caveats of endodontic therapy, which is commonly known as root canal treatment. Further, through this therapy, one can redevelop root even in immature teeth with necrotic pulps, which overall helps in maintaining skeletal and dental development. Past literature indicates that regenerative endodontic procedures seem to be successful, especially when compared with other conventional techniques such as Mineral Trioxide Aggregate apexification. Besides, many clinicians have begun to apply regenerative endodontic procedures to mature teeth in adult patients, with several clinical case reports that have shown complete resolution of signs and symptoms of pulp necrosis. Generally, the three most desirable outcomes anticipated by clinicians from this procedure include resolution of clinical signs and symptoms, root maturation and redevelopment of the neurogenesis process. Despite this, whether these objectives and true regeneration of the pulp/dentin complex are achieved is still a question mark. Following the discovery that regenerative endodontics indeed is a stem cell-based treatment, addressing the fundamental issue surrounding stem cells might assist in achieving all identified clinical outcomes while favoring tissue formation that closely resembles the pulp-dentin complex.

Immunoxpression of MMPs -9, -13 and TIMP-3 after Using Etch-and-rinse Adhesive

The aim of the present study was to determine the expression of MMP-9, MMP-13 and TIMP-3 after using the XP Bond ™ (Dentsply) dentin-bonding agent on 21 human teeth. Class I deep cavities were prepared and restored. After 01, 07, 14, 21, 30, 90 and 120 days, the teeth were extracted and processed for an immunohistochemical assessment (n=3). Immunohistochemical staining was performed using the monoclonal antibody anti-MMP-9, and polyclonal antibodies anti-MMP-13 and anti-TIMP-3. The immunoreactivity of metalloproteinases 9 and 13 was considered intense and moderate in the first storage intervals, before decreasing over time. In contrast, the immunoreactivity of TIMP-3 was considered absent in dentin and weak in pulp in the first time intervals, and completely absent in the subsequent intervals. MMP-9 expression in dentin and in pulp was prevalent in the dentinal tubules and odontoblastic layer, respectively. MMP-13 expression in dentin and in pulp was predominant in the pre-dentine region and odontoblastic layer, respectively. TIMP-3 expression was absent in dentin and predominantly located in the odontoblastic layer for pulp. In conclusion, the expression patterns of MMP-9, MMP-13 and TIMP-3 altered in the different time intervals studied. The increased expression of TIMP-3 in the first time intervals could suggest a synchronous response to the increased expression of MMPs in the same periods. The results confirmed the low performance of TIMP-3 in the physiological processes of the pulp-dentin complex for the conditions and materials tested herein.

Effects of different aperture-sized type I collagen/silk fibroin scaffolds on the proliferation and differentiation of human dental pulp cells.

This study aimed at evaluate the effects of different aperture-sized type I collagen/silk fibroin (CSF) scaffolds on the proliferation and differentiation of human dental pulp cells (HDPCs). The CSF scaffolds were designed with 3D mapping software Solidworks. Three different aperture-sized scaffolds (CSF1–CSF3) were prepared by low-temperature deposition 3D printing technology. The morphology was observed by scanning electron microscope (SEM) and optical coherence tomography. The porosity, hydrophilicity and mechanical capacity of the scaffold were detected, respectively. HDPCs (third passage, 1 × 105 cells) were seeded into each scaffold and investigated by SEM, CCK-8, alkaline phosphatase (ALP) activity and HE staining. The CSF scaffolds had porous structures with macropores and micropores. The macropore size of CSF1 to CSF3 was 421 ± 27 μm, 579 ± 36 μm and 707 ± 43 μm, respectively. The porosity was 69.8 ± 2.2%, 80.1 ± 2.8% and 86.5 ± 3.3%, respectively. All these scaffolds enhanced the adhesion and proliferation of HDPCs. The ALP activity in the CSF1 group was higher than that in the CSF3 groups (P < 0.01). HE staining showed HDPCs grew in multilayer within the scaffolds. CSF scaffolds significantly improved the adhesion and ALP activity of HDPCs. CSF scaffolds were promising candidates in dentine-pulp complex regeneration.

Characteristics of Large Animal Models for Current Cell-Based Oral Tissue Regeneration.

The recent advances in the field of cell-based therapeutics open promising perspectives for oral tissue regeneration. The development of large animal models, which overcome the limits of the rodent models and allow to emulate clinical situations, is crucial for the validation of regenerative strategies to move toward clinical application. Currently, porcine, canine, and ovine models are mainly developed for oral regeneration and their specific characteristics have an impact on the outcomes of the studies. Thus, this systematic review investigates the application of porcine, canine, and ovine models in present cell-based oral regeneration, according to the species characteristics and the targeted tissue to regenerate. A customized search of PubMed, EMBASE, Scopus, and Web of Science databases from January 2015 to March 2020 was conducted. Relevant articles about cell-based oral tissues engineering in porcine, canine, and ovine models were evaluated. Among the evaluated articles, 58 relevant studies about cell-based oral regeneration in porcine, canine, and ovine models matched the eligibility criteria and were selected for full analysis. Porcine models, the most similar species with humans, were mostly used for bone and periodontium regeneration; tooth regeneration was reported only in pig, except for one study in dog. Canine models were the most transversal models, successfully involved for all oral tissue regeneration and notably in implantology. However, differences with humans and ethical concerns affect the use of these models. Ovine models, alternative to porcine and canine ones, were mainly used for bone and, scarcely, periodontium regeneration. The anatomy and physiology of these animals restrain their involvement. If consistency was found in defect specificities and cell trends among different species animal models of bone, dentin-pulp complex, or tooth regeneration, variability appeared in periodontium. Regeneration assessment methods were more elaborate in porcines and canines than in ovines. Risk of bias was low for selection, attrition and reporting, but unclear for performance and detection. Overall, if none of the large animal models can be considered an ideal one, they are of deemed importance for oral cell-based tissue engineering and researchers should consider their relevance to establish favorable conditions for a given preclinical cell-based therapeutics. Impact statement This systematic review investigates porcine, canine, and ovine models for current oral cell-based regeneration procedures, and researchers could refer to it for the choice of the most pertinent preclinical model for a given cell-based therapeutics.

Lithium Chloride Exerts Differential Effects on Dentinogenesis and Osteogenesis in Primary Pulp Cultures

Wnt/β-catenin signaling is known to play essential roles in odontoblast differentiation and reparative dentin formation. Various Wnt activators including LiCl have been increasingly studied for their effectiveness to induce repair of the dentin-pulp complex. LiCl is a simple salt thought to activate Wnt/β-catenin signaling by inhibiting GSK3β. Previous in vitro and in vivo studies showed that LiCl increased odontoblast differentiation and enhanced reparative dentin formation. However, the underlying molecular and cellular mechanisms by which LiCl regulates odontoblast and osteoblast differentiation during reparative dentinogenesis are not well-understood. Our in vitro studies show that exposure of early dental pulp progenitors to LiCl increased the survival and the pool of αSMA+ progenitors, leading to enhanced odontoblast and osteoblast differentiation. The positive effects of LiCl in the differentiation of osteoblasts and odontoblasts from αSMA+ progenitors are mediated by Wnt/β-catenin signaling. Our results also showed that continuous and late exposure of dental pulp cells to LiCl increased the expression of odontoblast markers through Wnt/β-catenin signaling, and the number of odontoblasts expressing DMP1-Cherry and DSPP-Cerulean transgenes. However, unlike the early treatment, both continuous and late treatments decreased the expression of Bsp and the expression of BSP-GFPtpz transgene. These observations suggest that prolonged treatment with LiCl in more mature cells of the dental pulp has an inhibitory effect on osteoblast differentiation. The inhibitory effects of LiCl on osteogenesis and Bsp were not mediated through Wnt/β-catenin signaling. These observations suggest that the effects of LiCl, and GSK3β antagonists on reparative dentinogenesis involve multiple pathways and are not specific to Wnt/β-catenin signaling.

Biomaterial and Biofilm Interactions with the Pulp-Dentin Complex-on-a-Chip

Calcium silicate cements (CSCs) are the choice materials for vital pulp therapy because of their bioactive properties, promotion of pulp repair, and dentin bridge formation. Despite the significant progress made in understanding CSCs’ mechanisms of action, the key events that characterize the early interplay between CSC-dentin-pulp are still poorly understood. To address this gap, a microfluidic device, the “tooth-on-a-chip,” which was developed to emulate the biomaterial-dentin-pulp interface, was used to test 1) the effect of CSCs (ProRoot, Biodentine, and TheraCal) on the viability and proliferation of human dental pulp stem cells, 2) variations of pH, and 3) release within the pulp chamber of transforming growth factor–β (TGFβ) as a surrogate of the bioactive dentin matrix molecules. ProRoot significantly increased the extraction of TGFβ (P < 0.05) within 24 to 72 h and, along with Biodentine, induced higher cell proliferation (P > 0.05), while TheraCal decreased cell viability and provoked atypical changes in cell morphology. No correlation between TGFβ levels and pH was observed. Further, we established a biofilm of Streptococcus mutans on-chip to model the biomaterial-biofilm-dentin interface and conducted a live and dead assay to test the antimicrobial capability of ProRoot in real time. In conclusion, the device allows for direct characterization of the interaction of bioactive dental materials with the dentin-pulp complex on a model of restored tooth while enabling assessment of antibiofilm properties at the interface in real time that was previously unattainable.

English

BACKGROUND The vitality of dental pulp is essential for long-term survival of the tooth. Vital pulp therapy (VPT) intends to maintain healthy pulp tissue by eliminating bacteria from the dentin-pulp complex. There are many treatment options for vital pulp therapy in extensively decayed teeth. Pulp capping or pulpotomy procedures rely upon an accurate assessment of the pulp status, and careful management of the remaining pulp tissue. We wanted to evaluate as to whether biodentine total pulpotomy is an effective alternative to conventional endodontic therapy for young permanent teeth. METHODS Full coronal pulpotomy was performed in young permanent molars diagnosed with acute irreversible pulpitis with Biodentine as the pulpotomy medicament. Follow up evaluation was done clinically and radiographically at 3, 6 and 12 months. RESULTS During follow-up periods clinical signs/symptoms were absent including pulpal pain, swelling or presence of sinus and percussion pain. Continuous root development and healing of periapical radiolucency were noticed in the study which were indicative of maintenance of vitality of the pulp. CONCLUSIONS Within the limitations of this clinical study, it is concluded that total pulpotomy with Biodentine has a promising scope in regenerative approaches in the treatment of carious young permanent teeth. KEY WORDS Biodentine, Coronal Pulpotomy, Permanent Teeth, Total Pulpotomy

Roles of Dental Mesenchymal Stem Cells in the Management of Immature Necrotic Permanent Teeth.

Dental caries and trauma always lead to pulp necrosis and subsequent root development arrest of young permanent teeth. The traditional treatment, apexification, with the absence of further root formation, results in abnormal root morphology and compromises long-term prognosis. Regeneration endodontics procedures (REPs) have been developed and considered as an alternative strategy for management of immature permanent teeth with pulpal necrosis, including cell-free and cell-based REPs. Cell-free REPs, including revascularization and cell homing with molecules recruiting endogenous mesenchymal stem cells (MSCs), have been widely applied in clinical treatment, showing optimistic periapical lesion healing and continued root development. However, the regenerated pulp–dentin complex is still absent in these cases. Dental MSCs, as one of the essentials of tissue engineering, are vital seed cells in regenerative medicine. Dental MSC–based REPs have presented promising potential with pulp–dentin regeneration in large animal studies and clinical trials via cell transplantation. In the present review, we summarize current understanding of the biological basis of clinical treatments for immature necrotic permanent teeth and the roles of dental MSCs during this process and update the progress of MSC-based REPs in the administration of immature necrotic permanent teeth.

The Effect of Calcium-Silicate Cements on Reparative Dentinogenesis Following Direct Pulp Capping on Animal Models.

Dental pulp vitality is a desideratum for preserving the health and functionality of the tooth. In certain clinical situations that lead to pulp exposure, bioactive agents are used in direct pulp-capping procedures to stimulate the dentin-pulp complex and activate reparative dentinogenesis. Hydraulic calcium-silicate cements, derived from Portland cement, can induce the formation of a new dentin bridge at the interface between the biomaterial and the dental pulp. Odontoblasts are molecularly activated, and, if necessary, undifferentiated stem cells in the dental pulp can differentiate into odontoblasts. An extensive review of literature was conducted on MedLine/PubMed database to evaluate the histological outcomes of direct pulp capping with hydraulic calcium-silicate cements performed on animal models. Overall, irrespective of their physico-chemical properties and the molecular mechanisms involved in pulp healing, the effects of cements on tertiary dentin formation and pulp vitality preservation were positive. Histological examinations showed different degrees of dental pulp inflammatory response and complete/incomplete dentin bridge formation during the pulp healing process at different follow-up periods. Calcium silicate materials have the ability to induce reparative dentinogenesis when applied over exposed pulps, with different behaviors, as related to the animal model used, pulpal inflammatory responses, and quality of dentin bridges.

Reduced Graphene Oxide Fibers for Guidance Growth of Trigeminal Sensory Neurons.

Neurite alignment and elongation play special roles in the treatment of neuron disease, design of tissue engineering implants, and bioelectrodes applications. For instance, the trigeminal neurons (TGNs) free nerve endings are a key component of the pulp-dentin complex. The reinnervation of the pulp canal space requires the recruitment of apically positioned free nerve endings through axonal guidance. Many studies have been carried to develop patterned two-dimensional substrates or three-dimensional scaffolds with aligned topographical structures to guide axonal growth. However, most of the strategies are either complicated/inconvenient in process or time-/cost-sacrifice. One-step dimensionally confined hydrothermal (DCH) technique has been considered an effective and facile approach to fabricate reduced graphene oxide fibers (rGOFs), and the rGOFs have shown significant potential in regulating neural stem cells differentiation toward neurons. Here, inspired by the relationship between the lateral size of GO nanosheets and the electrical conductivity of GO films made from GO sheets as a building block, we fabricated surface conductivity and topography-controlled rGOFs based on the DCH method. Well "self-patterned" directional channel structure of rGOF showed outstanding ability to improve the neurofilament alignment and migration, with the cell deviation angle less than 10° for over 90% of the cells, while a porous surface structure tended to form neuron nets. All of the rGOF possessed excellent cytocompatibility with TGNs. Our results underlined the high degree of alignment of topographical cues in guidance of neurite over high electrical conductivity. The as-prepared rGOFs could be used in many areas including biosensing, electrochemistry, energy, and peripheral or central nerve tissue engineering.

Autophagy in tooth: Physiology, disease and therapeutic implication.

Autophagy is an evolutionarily conserved cellular process, in which damaged organelles and proteins are engulfed in autophagic vesicles and subsequently fuse with lysosomes for degradation. Autophagy is widely involved in different physiologic or pathologic processes in human. Accumulating evidence indicates that autophagy operates as a critical quality control mechanism to maintain pulp homeostasis and structural integrity of the dentin-pulp complex. Autophagy is activated during stresses and is involved in the pathogenesis of pulpitis and periapical infection. Recent discoveries have also provided intriguing insights into the roles of autophagy in tooth development, pulp aging and stress adaptation. In this review, we provide an update on the multifaceted functions of autophagy in physiology and pathophysiology of tooth. We also discuss the therapeutic implications of autophagy modulation in diseases and the regeneration of dentin-pulp complex.

Effect of human dental pulp stem cell conditioned medium in the dentin-pulp complex regeneration: A pilot in vivo study

BackgroundDental trauma, restorative operative procedures and/or caries lesions can expose the dental pulp. Facing this clinical condition, where the maintenance of the dentin-pulp complex vitality is imperative, is challenging in Dentistry. Dental pulp stem cells conditioned medium contains trophic factors that could help in this task. This in vivo pilot study aimed to evaluate the effects of the human dental pulp stem cells conditioned medium on the dental pulp tissue response to vital pulp therapy. Material and methodsConcentrated conditioned medium was obtained by incubating characterized human dental pulp stem cells with fresh culture medium. Pulp exposures performed at the first upper molars (n = 20) of Wistar rats were directly capped with: MTA or MTA + Conditioned Medium. Four and 8 weeks later, the samples were qualitatively analyzed in histological sections (H&E). ResultsWhen the conditioned medium was associated with MTA, there were a high percentage of samples presenting formation of dentin bridges and small percentage of pulp tissue with inflammatory signs in both experimental times. The conditioned medium improved the organization of the newly formed hard tissue. ConclusionsThe association of dental pulp stem cell conditioned medium with MTA showed beneficial effects on dentin-pulp complex regeneration and has promising potential for studies in regenerative dentistry.

Effects of 9,300 nm Carbon Dioxide Laser on Dental Hard Tissue: A Concise Review.

A carbon dioxide laser at 9,300 nm has a high absorption affinity for water and a shallow depth of penetration. It can be used for soft tissue surgery and hemostasis. Besides, it matches well with the absorption characteristic of hydroxyapatite in enamel and dentine. Therefore, the laser possesses a great ability for energy transfer to dental hard tissues. It has a low risk of thermo-damage to the dentine–pulp complex because it has a shallow depth of heat absorption. Hence, the laser is safe for dental hard tissue preparation. A carbon dioxide laser at 9,300 nm can effectively alter the chemical structure of teeth. It increases the ratio of calcium to phosphorus and converts the carbonated hydroxyapatite to the purer hydroxyapatite of enamel and dentine. It can alter the surface morphology of a tooth through surface melting, fusion, and ablation of dentine and enamel. At higher power, it removes caries lesions. It can enhance the success of restoration by increasing the bond strength of dental adhesives to the dentine and enamel. A carbon dioxide laser at 9,300 nm can also be used with fluoride for caries prevention. The advancement of technology allows the laser to be delivered in very short pulse durations and high repetition rates (frequency). Consequently, the laser can now be used with high peak power. The objective of this review is to discuss the effects and potential use of a 9,300 nm carbon dioxide laser on dental hard tissue.

Endodontic management of traumatized permanent teeth: a comprehensive review.

The pulp plays a key role in the treatment of traumatic dental injuries (TDIs) and is strongly associated with the outcome, particularly in severe cases. A correct pulp diagnosis is essential as it forms the basis for developing the appropriate management strategy. However, many TDIs are complex, and their treatment requires a profound knowledge of the physiological and pathological responses of the affected tissues. This comprehensive review will look at the dentine-pulp complex and its interaction with the surrounding tissues following TDIs. The literature up to 2020 was reviewed based on several searches on PubMed and the Cochrane Library using relevant terms. In addition to the recently revised guidelines of the International Association of Dental Traumatology, this article aims to provide background information with a focus on endodontic aspects and to gather evidence on which a clinician can make decisions on the choice of the appropriate endodontic approach for traumatized permanent teeth.