Protein Film Voltammetry Research Articles

Characterization of Shewanella oneidensis MtrC: a cell-surface decaheme cytochrome involved in respiratory electron transport to extracellular electron acceptors

MtrC is a decaheme c-type cytochrome associated with the outer cell membrane of Fe(III)-respiring species of the Shewanella genus. It is proposed to play a role in anaerobic respiration by mediating electron transfer to extracellular mineral oxides that can serve as terminal electron acceptors. The present work presents the first spectropotentiometric and voltammetric characterization of MtrC, using protein purified from Shewanella oneidensis MR-1. Potentiometric titrations, monitored by UV-vis absorption and electron paramagnetic resonance (EPR) spectroscopy, reveal that the hemes within MtrC titrate over a broad potential range spanning between approximately +100 and approximately -500 mV (vs. the standard hydrogen electrode). Across this potential window the UV-vis absorption spectra are characteristic of low-spin c-type hemes and the EPR spectra reveal broad, complex features that suggest the presence of magnetically spin-coupled low-spin c-hemes. Non-catalytic protein film voltammetry of MtrC demonstrates reversible electrochemistry over a potential window similar to that disclosed spectroscopically. The voltammetry also allows definition of kinetic properties of MtrC in direct electron exchange with a solid electrode surface and during reduction of a model Fe(III) substrate. Taken together, the data provide quantitative information on the potential domain in which MtrC can operate.

Effects of Slow Substrate Binding and Release in Redox Enzymes: Theory and Application to Periplasmic Nitrate Reductase

For redox enzymes, the technique called protein film voltammetry makes it possible to determine the entire profile of activity against driving force by having the enzyme exchanging directly electrons with the rotating-disc electrode onto which it is adsorbed. Both the potential location of the catalytic response and its detailed shape report on the sequence of catalytic events, electron transfers and chemical steps, but the models that have been used so far to decipher this signal lack generality. For example, it was often proposed that substrate binding to multiple redox states of the active site may explain that turnover is greater in a certain window of electrode potential, but no fully analytical treatment has been given. Here, we derive (i) the general current equation for the case of reversible substrate binding to any redox states of a two-electron active site (as exemplified by flavins and Mo cofactors), (ii) the quantitative conditions for an extremum in activity to occur, and (iii) the expressions from which the substrate-concentration dependence of the catalytic potential can be interpreted to learn about the kinetics of substrate binding and how this affects the reduction potential of the active site. Not only does slow substrate binding and release make the catalytic wave shape highly complex, but we also show that it can have important consequences which will escape detection in traditional experiments: the position of the wave (this is the driving force that is required to elicit catalysis) departs from the reduction potential of the active site even at the lowest substrate concentration, and this deviation may be large if substrate binding is irreversible. This occurs in the reductive half-cycle of periplasmic nitrate reductase where irreversibility lowers the driving force required to reduce the active site under turnover conditions and favors intramolecular electron transfer from the proximal [4Fe4S]+ cluster to the active site Mo(V).

Modulation of Heme Redox Potential in the Cytochrome c6 Family

Cytochrome c6A is a unique dithio-cytochrome of green algae and plants. It has a very similar core structure to that of bacterial and algal cytochromes c6 but is unable to fulfill the same function of transferring electrons from cytochrome f to photosystem I. A key feature is that its heme midpoint potential is more than 200 mV below that of cytochrome c6 despite having His and Met as axial heme-iron ligands. To identify the molecular origins of the difference in potential, the structure of cytochrome c6 from the cyanobacterium Phormidium laminosum has been determined by X-ray crystallography and compared with the known structure of cytochrome c6A. One salient difference of the heme pockets is that a highly conserved Gln (Q51) in cytochrome c6 is replaced by Val (V52) in c6A. Using protein film voltammetry, we found that swapping these residues raised the c6A potential by +109 mV and decreased that of c6 by almost the same extent, -100 mV. X-ray crystallography of the V52Q protein showed that the Gln residue adopts the same configuration relative to the heme as in cytochrome c6 and we propose that this stereochemistry destabilizes the oxidized form of the heme. Consequently, replacement of Gln by Val was probably a key step in the evolution of cytochrome c6A from cytochrome c6, inhibiting reduction by the cytochrome b6f complex and facilitating establishment of a new function.

Protein Film Voltammetry of Copper-Containing Nitrite Reductase Reveals Reversible Inactivation

The Cu-containing nitrite reductase from Alcaligenes faecalis S-6 catalyzes the one-electron reduction of nitrite to nitric oxide (NO). Electrons enter the enzyme at the so-called type-1 Cu site and are then transferred internally to the catalytic type-2 Cu site. Protein film voltammetry experiments were carried out to obtain detailed information about the catalytic cycle. The homotrimeric structure of the enzyme is reflected in a distribution of the heterogeneous electron-transfer rates around three main values. Otherwise, the properties and the mode of operation of the enzyme when it is adsorbed as a film on a pyrolytic graphite electrode are essentially unchanged compared to those of the free enzyme in solution. It was established that the reduced type-2 site exists in either an active or an inactive conformation with an interconversion rate of approximately 0.1 s(-1). The random sequential mechanism comprises two routes, one in which the type-2 site is reduced first and subsequently binds nitrite, which is then converted into NO, and another in which the oxidized type-2 site binds nitrite and then accepts an electron to produce NO. At high nitrite concentration, the second route prevails and internal electron transfer is rate-limiting. The midpoint potentials of both sites could be established under catalytic conditions. Binding of nitrite to the type-2 site does not affect the midpoint potential of the type-1 site, thereby excluding cooperativity between the two sites.

The Flavoprotein Subcomplex of Complex I (NADH:Ubiquinone Oxidoreductase) from Bovine Heart Mitochondria: Insights into the Mechanisms of NADH Oxidation and NAD+ Reduction from Protein Film Voltammetry

Complex I (NADH:ubiquinone oxidoreductase) from bovine heart mitochondria contains 45 different subunits and nine redox cofactors. NADH is oxidized by a noncovalently bound flavin mononucleotide (FMN), then seven iron-sulfur clusters transfer the two electrons to quinone, and four protons are pumped across the inner mitochondrial membrane. Here, we use protein film voltammetry to investigate the mechanisms of NADH oxidation and NAD+ reduction in the simplest catalytically active subcomplex of complex I, the flavoprotein (Fp) subcomplex. The Fp subcomplex was prepared using chromatography and contained the 51 and 24 kDa subunits, the FMN, one [4Fe-4S] cluster, and one [2Fe-2S] cluster. The reduction potential of the FMN in the enzyme's active site is lower than that of free FMN (thus, the oxidized state of the FMN is most strongly bound) and close to the reduction potential of NAD+. Consequently, the catalytic transformation is reversible. Electrocatalytic NADH oxidation by subcomplex Fp can be explained by a model comprising substrate mass transport, the Michaelis-Menten equation, and interfacial electron transfer kinetics. The difference between the "catalytic" potential and the FMN potential suggests that the flavin is reoxidized before NAD+ is released or that intramolecular electron transfer from the flavin to the [4Fe-4S] cluster influences the catalytic rate. NAD+ reduction displays a marked activity maximum, below which the catalytic rate decreases sharply as the driving force increases. Two possible models reproduce the observed catalytic waveshapes: one describing an effect from reducing the proximal [2Fe-2S] cluster and the other the enhanced catalytic ability of the semiflavin state.

Direct Electrochemistry of Tetraheme Cytochrome c554 from Nitrosomonas europaea: Redox Cooperativity and Gating

The tetraheme cytochrome c554 is the redox partner of hydroxylamine oxidoreductase (HAO) of Nitrosomonas europaea, responsible for accepting the four electrons generated in HAO turnover. Here, we have used protein film voltammetry (PFV) to provide a new, highly resolved picture of the redox properties of cyt c554. The four heme groups of the cytochrome are found to have potentials of +32, +50, −183, and −283 mV (versus hydrogen). While the two lowest potential hemes (III and IV) behave as simple napp = 1 redox cofactors in all experiments, the high potential hemes appear to act as a pair that engages in cooperative electron transfer reactions (napp > 1.0). By studying the cytochrome on variable electrode surfaces, gating of the reduction of the two high potential hemes can also be observed. When the interfacial electron transfer rate for cyt c554 is on the time scale of HAO catalysis (on a mercaptoundecanoic acid-modified gold electrode), gating is found, indicating that oxidation of the two-electron reduced form of cyt c554 is prevented, while reduction of the totally oxidized form is facile.

A needle in a haystack: The active site of the membrane-bound complex cytochrome c nitrite reductase

Cytochrome c nitrite reductase is a multicenter enzyme that uses a five-coordinated heme to perform the six-electron reduction of nitrite to ammonium. In the sulfate reducing bacterium Desulfovibrio desulfuricans ATCC 27774, the enzyme is purified as a NrfA 2NrfH complex that houses 14 hemes. The number of closely-spaced hemes in this enzyme and the magnetic interactions between them make it very difficult to study the active site by using traditional spectroscopic approaches such as EPR or UV–Vis. Here, we use both catalytic and non-catalytic protein film voltammetry to simply and unambiguously determine the reduction potential of the catalytic heme over a wide range of pH and we demonstrate that proton transfer is coupled to electron transfer at the active site.

Electrochemical Investigations of the Interconversions between Catalytic and Inhibited States of the [FeFe]-Hydrogenase from Desulfovibrio desulfuricans

Studies of the catalytic properties of the [FeFe]-hydrogenase from Desulfovibrio desulfuricans by protein film voltammetry, under a H2 atmosphere, reveal and establish a variety of interesting properties not observed or measured quantitatively with other techniques. The catalytic bias (inherent ability to oxidize hydrogen vs reduce protons) is quantified over a wide pH range: the enzyme is proficient at both H2 oxidation (from pH > 6) and H2 production (pH < 6). Hydrogen production is inhibited by H2, but the effect is much smaller than observed for [NiFe]-hydrogenases from Allochromatium vinosum or Desulfovibrio fructosovorans. Under anaerobic conditions and positive potentials, the [FeFe]-hydrogenase is oxidized to an inactive form, inert toward reaction with CO and O2, that rapidly reactivates upon one-electron reduction under 1 bar of H2. The potential dependence of this interconversion shows that the oxidized inactive form exists in two pH-interconvertible states with pK(ox) = 5.9. Studies of the CO-inhibited enzyme under H2 reveals a strong enhancement of the rate of activation by white light at -109 mV (monitoring H2 oxidation) that is absent at low potential (-540 mV, monitoring H+ reduction), thus demonstrating photolability that is dependent upon the oxidation state.

Voltammetry and In Situ Scanning Tunneling Microscopy of Cytochrome c Nitrite Reductase on Au(111) Electrodes

Escherichia coli cytochrome c nitrite reductase (NrfA) catalyzes the six-electron reduction of nitrite to perform an important role in the biogeochemical cycling of nitrogen. Here we describe NrfA adsorption on single-crystal Au(111) electrodes as an electrocatalytically active film in which the enzyme undergoes direct electron exchange with the electrode. The adsorbed NrfA has been imaged to molecular resolution by in situ scanning tunneling microscopy (in situ STM) under full electrochemical potential control and under conditions where the enzyme is electrocatalytically active. Details of the density and orientational distribution of NrfA molecules are disclosed. The submonolayer coverage resolved by in situ STM is readily reconciled with the failure to detect nonturnover signals in cyclic voltammetry of the NrfA films. The molecular structures show a range of lateral dimensions. These are suggestive of a distribution of orientations that could account for the otherwise anomalously low turnover number calculated for the total population of adsorbed NrfA molecules when compared with that determined for solutions of NrfA. Thus, comparison of the voltammetric signals and in situ STM images offers a direct approach to correlate electrocatalytic and molecular properties of the protein layer, a long-standing issue in protein film voltammetry.

Protonation and inhibition of Nitrosomonas europaea cytochrome c peroxidase observed with protein film voltammetry

The impact of protonation and inhibitor binding of the diheme cytochrome c peroxidase (CCP) from Nitrosomonas europaea has been examined by the technique of catalytic protein film voltammetry (PFV). Previous efforts have shown that the low-potential heme active site ( L) binds substrate and yields electrocatalysis at an pyrolytic graphite edge electrode, with properties evocative of a high-potential intermediate, with E m > 540 mV (vs. normal hydrogen electrode) [A.L. Bradley, S.E. Chobot, D.M. Arciero, A.B. Hooper, S. J. Elliott, J. Biol. Chem. 279 (2004) 13297–13300]. Here we demonstrate through similar experiments that catalytic PFV generates limiting currents which allow for electrochemically-detected enzymology of the Ne CCP: such as the demonstration that pH-dependent Michaelis–Menten constants ( K m values) reveal a pK a value of 6.5 associated with the “ES” complex. Further, the direct electrocatalysis is shown in the presence of known inhibitors (cyanide and azide), indicating that inhibitor binding occurs at L, and shifts the resulting catalytic midpoint potential in a negative direction. Michaelis–Menten treatment of the limiting currents generated in the presence of variable concentrations of inhibitors showed that cyanide behaved as a competitive inhibitor with a K i value of 0.15 μM; azide revealed a mixed-mode of inhibition. The observed data were found to support a previous model of electrocatalysis, and the role of proton transfer chemistry in the active site is discussed in terms of a structural model.

The pyrolytic graphite surface as an enzyme substrate: microscopic and spectroscopic studies

We have conducted a series of experiments to explore the surface of the polished pyrolytic graphite ‘edge’ electrode as routinely prepared for use in protein film voltammetry. Our investigations have included nitrogen porosimetry and scanning electron microscopy. The nitrogen adsorption revealed a Brunauer–Emmett–Teller surface area ∼104 times greater than the geometric surface area of the electrode. The pore-size distribution calculated by the Horvath–Kawazoe method showed that 10–18% of the pore volume arises from pores having widths >10 nm and, thus, should be accessible to enzymes, although much of the exposed ‘wall’ surface may be inactive for enzyme binding or electron transfer: for example, it may be mainly basal plane. Scanning electron micrographs of the abraded pyrolytic graphite edge showed differing scales of surface damage caused by the abrasion and the presence of many cracks in the surface where thin platelets had been removed.

A Random-sequential Mechanism for Nitrite Binding and Active Site Reduction in Copper-containing Nitrite Reductase

The homotrimeric copper-containing nitrite reductase (NiR) contains one type-1 and one type-2 copper center per monomer. Electrons enter through the type-1 site and are shuttled to the type-2 site where nitrite is reduced to nitric oxide. To investigate the catalytic mechanism of NiR the effects of pH and nitrite on the turnover rate in the presence of three different electron donors at saturating concentrations were measured. The activity of NiR was also measured electrochemically by exploiting direct electron transfer to the enzyme immobilized on a graphite rotating disk electrode. In all cases, the steady-state kinetics fitted excellently to a random-sequential mechanism in which electron transfer from the type-1 to the type-2 site is rate-limiting. At low [NO(-)(2)] reduction of the type-2 site precedes nitrite binding, at high [NO(-)(2)] the reverse occurs. Below pH 6.5, the catalytic activity diminished at higher nitrite concentrations, in agreement with electron transfer being slower to the nitrite-bound type-2 site than to the water-bound type-2 site. Above pH 6.5, substrate activation is observed, in agreement with electron transfer to the nitrite-bound type-2 site being faster than electron transfer to the hydroxyl-bound type-2 site. To study the effect of slower electron transfer between the type-1 and type-2 site, NiR M150T was used. It has a type-1 site with a 125-mV higher midpoint potential and a 0.3-eV higher reorganization energy leading to an approximately 50-fold slower intramolecular electron transfer to the type-2 site. The results confirm that NiR employs a random-sequential mechanism.

Rapid and Reversible Reactions of [NiFe]-Hydrogenases with Sulfide

Rapid and reversible binding of sulfide to [NiFe]-hydrogenases (particularly the enzyme from Desulfovibrio vulgaris) under weakly acidic conditions (pH 6) has been studied by protein film voltammetry, which tracks the formation of different species as a function of potential. Sulfide (most likely entering as H2S) rapidly attacks the active site during H2 oxidation. The inactive adduct is formed (and is stable) only at potentials substantially more positive than the comparable species formed with oxygen species and is easily reactivated upon reduction. The sulfide adduct also reacts further with O2 to produce a new species that undergoes reductive activation very slowly. The results clarify complex and controversial chemistry reported in the literature and provide insight into how these enzymes would cope with sulfide production in sulfate-reducing bacteria.

Changing the Ligation of the Distal [4Fe4S] Cluster in NiFe Hydrogenase Impairs Inter- and Intramolecular Electron Transfers

In NiFe hydrogenases, electrons are transferred from the active site to the redox partner via a chain of three Iron-Sulfur clusters, and the surface-exposed [4Fe4S] cluster has an unusual His(Cys)3 ligation. When this Histidine (H184 in Desulfovibrio fructosovorans) is changed into a cysteine or a glycine, a distal cubane is still assembled but the oxidative activity of the mutants is only 1.5 and 3% of that of the WT, respectively. We compared the activities of the WT and engineered enzymes for H2 oxidation, H+ reduction and H/D exchange, under various conditions: (i) either with the enzyme directly adsorbed onto an electrode or using soluble redox partners, and (ii) in the presence of exogenous ligands whose binding to the exposed Fe of H184G was expected to modulate the properties of the distal cluster. Protein film voltammetry proved particularly useful to unravel the effects of the mutations on inter and intramolecular electron transfer (ET). We demonstrate that changing the coordination of the distal cluster has no effect on cluster assembly, protein stability, active-site chemistry and proton transfer; however, it slows down the first-order rates of ET to and from the cluster. All-sulfur coordination is actually detrimental to ET, and intramolecular (uphill) ET is rate determining in the glycine variant. This demonstrates that although [4Fe4S] clusters are robust chemical constructs, the direct protein ligands play an essential role in imparting their ability to transfer electrons.

Myoglobin retains iron heme and near-native conformation in DDAB films prepared from pH 5 to 7 dispersions

A recent paper [M.T. DeGroot, M. Merkx, M.J.M. Koper, J. Am. Chem. Soc. 127 (2005) 16224] suggests that iron heme is released during casting films of myoglobin (Mb) and didodecyldimethylammonium bromide (DDAB) on pyrolytic graphite (PG) electrodes. Insoluble films of lipids and surfactants have become widely used for protein film electrochemistry, and protein conformation within them is a critical issue. The present communication examines the integrity of myoglobin structure in DDAB films by voltammetry, visible absorption and circular dichroism spectroscopy, and discusses these new data in context with previously reported studies. Voltammetry showed that peak potentials for Mb, horseradish peroxidase and hemin in DDAB films are significantly different, and that Soret band and CD spectra in the films are fully consistent with a near native Mb conformation within the films. The view that pyrolytic graphite surfaces are catalysts for denaturation and heme loss in Mb-DDAB films is discredited by consideration of key results in the literature. On the basis of all results and considerations, this communication confirms that when DDAB films are made from vesicle dispersions at pH 5 to 7 and used in neutral buffers containing NaBr, Mb in the film is in a near-native conformation.

Solvent Isotope Effects on Interfacial Protein Electron Transfer in Crystals and Electrode Films

D(2)O-grown crystals of yeast zinc porphyrin substituted cytochrome c peroxidase (ZnCcP) in complex with yeast iso-1-cytochrome c (yCc) diffract to higher resolution (1.7 A) and pack differently than H(2)O-grown crystals (2.4-3.0 A). Two ZnCcP's bind the same yCc (porphyrin-to-porphyrin separations of 19 and 29 A), with one ZnCcP interacting through the same interface found in the H(2)O crystals. The triplet excited-state of at least one of the two unique ZnCcP's is quenched by electron transfer (ET) to Fe(III)yCc (k(e) = 220 s(-1)). Measurement of thermal recombination ET between Fe(II)yCc and ZnCcP+ in the D(2)O-treated crystals has both slow and fast components that differ by 2 orders of magnitude (k(eb)(1) = 2200 s(-1), k(eb)(2) = 30 s(-1)). Back ET in H(2)O-grown crystals is too fast for observation, but soaking H(2)O-grown crystals in D(2)O for hours generates slower back ET, with kinetics similar to those of the D(2)O-grown crystals (k(eb)(1) = 7000 s(-1), k(eb)(2) = 100 s(-1)). Protein-film voltammetry of yCc adsorbed to mixed alkanethiol monolayers on gold electrodes shows slower ET for D(2)O-grown yCc films than for H(2)O-grown films (k(H) = 800 s(-1); k(D) = 540 s(-1) at 20 degrees C). Soaking H(2)O- or D(2)O-grown films in the counter solvent produces an immediate inverse isotope effect that diminishes over hours until the ET rate reaches that found in the counter solvent. Thus, D(2)O substitution perturbs interactions and ET between yCc and either CcP or electrode films. The effects derive from slow exchanging protons or solvent molecules that in the crystal produce only small structural changes.

Inhibiting Escherichia coli cytochrome c nitrite reductase: voltammetry reveals an enzyme equipped for action despite the chemical challenges it may face in vivo

Escherichia coli cytochrome c nitrite reductase is one of a large family of homologous enzymes that are particularly prevalent in pathogenic enterobacteria. The enzymes are periplasmic and in vivo may find themselves challenged by molecules that could enhance or compromise their performance. In the present study, we describe protein film voltammetry in which the activity of E. coli cytochrome c nitrite reductase is challenged by the presence of a number of small molecules. These results are discussed in light of the environment(s) that the enzyme may face before and after colonization of a human host.

Respiratory nitrate and nitrite pathway in the denitrifier haloarchaeon Haloferax mediterranei

Haloferax mediterranei cells are able to use high nitrate or nitrite concentrations as electron acceptors under anoxic conditions. The nar operon, which has eight open reading frames, has been sequenced and its regulation has been characterized at the transcriptional level. The narG and narH genes encode the Nar (respiratory nitrate reductase) catalytic subunit (NarG) and the electron transfer Nar subunit (NarH) respectively. Nar has been purified and characterized in vitro. This characterization has included protein-film voltammetry and preliminary EPR studies.

Direct electrochemistry and electrocatalysis of heme-proteins in regenerated silk fibroin film

A biocompatible silk fibroin (SF) film provided a feasible microenvironment for heme-proteins to direct electron transfer on graphite electrodes (GE). Myoglobin (Mb), hemoglobin (Hb), horseradish peroxidase (HRP), and catalase (Cat) in corporated in SF films exhibited a pair of well-defined, nearly reversible cyclic voltammetric peaks, corresponding to the reaction of hemeFe (III) + e → hemeFe (II). The formal potential ( E 0), the apparent coverage ( Γ) and the electron transfer rate constant ( k s) of four proteins in SF films were evaluated by analyzing the cyclic voltammograms (CVs) of heme-proteins. The formal potential was pH dependent, suggesting that proton ion was involved in the reaction. Ultraviolet visible (UV–vis) spectra and reflectance absorbance infrared (RAIR) spectra indicated that heme-proteins in SF films were not grossly denatured. The structure of heme-proteins–SF films was investigated using scanning electron microscopy (SEM) and RAIR. It indicated that there existed intermolecular interaction between heme-proteins and SF and this governed their different morphology in SF films. Hydrogen peroxide and nitric oxide were catalytically reduced by the heme-proteins in SF films, showing the potential applicability of the heme-proteins–SF films as the new type of biosensors based on the protein film voltammetry.

Electron Flow in Multicenter Enzymes: Theory, Applications, and Consequences on the Natural Design of Redox Chains

In protein film voltammetry, a redox enzyme is directly connected to an electrode; in the presence of substrate and when the driving force provided by the electrode is appropriate, a current flow reveals the steady-state turnover. We show that, in the case of a multicenter enzyme, this signal reports on the energetics and kinetics of electron transfer (ET) along the redox chain that wires the active site to the electrode, and this provides a new strategy for studying intramolecular ET. We propose a model which takes into account all the enzyme's redox microstates, and we prove it useful to interpret data for various enzymes. Several general ideas emerge from this analysis. Considering the reversibility of ET is a requirement: the usual picture, where ET is depicted as a series of irreversible steps, is oversimplified and lacks the important features that we emphasize. We give justification to the concept of apparent reduction potential on the time scale of turnover and we explain how the value of this potential relates to the thermodynamic and kinetic properties of the system. When intramolecular ET does not limit turnover, the redox chain merely mediates the driving force provided by the electrode or the soluble redox partner, whereas when intramolecular ET is slow, the enzyme behaves as if its active active site had apparent redox properties which depend on the reduction potentials of the relays. This suggests an alternative to the idea that redox chains are optimized in terms of speed: evolutionary pressure may have resulted in slowing down intramolecular ET in order to tune the enzyme's "operating potential".