Production Of Integral Membrane Proteins Research Articles

Screening of Membrane Protein Production by Comparison of Transient Expression in Insect and Mammalian Cells.

Membrane proteins are difficult biomolecules to express and purify. In this paper, we compare the small-scale production of six selected eukaryotic integral membrane proteins in insect and mammalian cell expression systems using different techniques for gene delivery. The target proteins were C terminally fused to the green fluorescent marker protein GFP to enable sensitive monitoring. We show that the choice of expression systems makes a considerable difference to the yield and quality of the six selected membrane proteins. Virus-free transient gene expression (TGE) in insect High Five cells combined with solubilization in dodecylmaltoside plus cholesteryl hemisuccinate generated the most homogeneous samples for all six targets. Further, the affinity purification of the solubilized proteins using the Twin-Strep® tag improved protein quality in terms of yield and homogeneity compared to His-tag purification. TGE in High Five insect cells offers a fast and economically attractive alternative to the established methods that require either baculovirus construction and the infection of the insect cells or relatively expensive transient gene expression in mammalian cells for the production of integral membrane proteins.

Saccharomyces cerevisiae as a superior host for overproduction of prokaryotic integral membrane proteins.

Integral membrane proteins (IMPs) constitute ~30% of all proteins encoded by the genome of any organism and Escherichia coli remains the first-choice host for recombinant production of prokaryotic IMPs. However, the expression levels of prokaryotic IMPs delivered by this bacterium are often low and overproduced targets often accumulate in inclusion bodies. The targets are therefore often discarded to avoid an additional and inconvenient refolding step in the purification protocol. Here we compared expression of five prokaryotic (bacterial and archaeal) IMP families in E. coli and Saccharomyces cerevisiae. We demonstrate that our S. cerevisiae-based production platform is superior in expression of four investigated IMPs, overall being able to deliver high quantities of active target proteins. Surprisingly, in case of the family of zinc transporters (Zrt/Irt-like proteins, ZIPs), S. cerevisiae rescued protein expression that was undetectable in E. coli. We also demonstrate the effect of localization of the fusion tag on expression yield and sample quality in detergent micelles. Lastly, we present a road map to achieve the most efficient expression of prokaryotic IMPs in our yeast platform. Our findings demonstrate the great potential of S. cerevisiae as host for high-throughput recombinant overproduction of bacterial and archaeal IMPs for downstream biophysical characterization.

Preparation of Recombinant Membrane Proteins from Pichia pastoris for Molecular Investigations.

Pichia pastoris is a eukaryotic microorganism reputed for its ability to mass-produce recombinant proteins, including integral membrane proteins, for various applications. This article details a series of protocols that progress towards the production of integral membrane proteins, their extraction and purification in the presence of detergents, and their eventual reconstitution in lipid nanoparticles. These basic procedures can be further optimized to provide integral membrane protein samples that are compatible with a number of structural and/or functional investigations at the molecular level. Each protocol provides general guidelines, technical hints, and specific recommendations, and is illustrated with case studies corresponding to several representative mammalian proteins. © 2020 by John Wiley & Sons, Inc. Basic Protocol 1: Production of membrane proteins in a P. pastoris recombinant clone using methanol induction Basic Protocol 2: Preparation of whole-membrane fractions Alternate Protocol 1: Preparation of yeast protoplasts Basic Protocol 3: Extraction of membrane proteins from whole-membrane fractions Basic Protocol 4: Purification of membrane proteins Alternate Protocol 2: Purification of membrane proteins from yeast protoplasts Alternate Protocol 3: Simultaneous protoplast preparation and membrane solubilization for purification of membrane proteins Basic Protocol 5: Reconstitution of detergent-purified membrane proteins in lipid nanoparticles.

Proteoliposome Engineering with Cell-Free Membrane Protein Synthesis: Control of Membrane Protein Sorting into Liposomes by Chaperoning Systems.

Integral membrane proteins (IMPs) modulate key cellular processes; their dysfunctions are closely related to disease. However, production of IMPs in active conformations for further study is hindered by aggregation and toxicity in living expression systems. IMPs are therefore produced in cell‐free systems employing liposome chaperoning, but membrane integration of the nascent IMPs is suboptimal and orientation of the integrated proteins remains uncontrollable. Thus, an artificial membrane protein sorting system is developed, based on polyhistidine/nickel‐chelate affinity, combined with cell‐free membrane protein synthesis. Its proof of concept is demonstrated with a N‐terminal hexahistadine‐fused conexin‐43 (NHis–Cx43) model IMP. Nickel‐chelating liposomes efficiently incorporate twofold newly synthesized NHis–Cx43 compared with Cx43. NHis–Cx43, when synthesized in this system, forms dye‐permeable hemichannels, similar to plasma membrane pores formed by Cx43 in cells. The topology of incorporated NHis–Cx43 indicates two orientations in the liposomal membranes. However, NHis–Cx43 orientation is controlled, resulting in single topology, by combination of the natural molecular chaperone DnaKJE. Successful synthesis and at least 4.5‐fold increase lipid incorporation are also achieved with three other NHis‐fused IMPs, including α‐helix and β‐barrel IMPs. Overall, this simple membrane protein sorting system is usable combined with molecular chaperones to prepare proteoliposomes for many applications.

High-level soluble expression of one model olfactory receptor (ODR-10) in Escherichia coli cell-free system

High-level production of G protein-coupled receptors (GPCRs) is usually difficult to achieve in heterologous cell systems. The inherent hydrophobicity of these receptors could cause aggregation and possible cytotoxicity. Cell-free (CF) expression has become a highly promising tool for the fast and efficient production of integral membrane proteins. Here we reported the CF production of an olfactory receptor from Caenorhabditis elegans, odorant response abnormal protein 10 (ODR-10), a member of GPCRs, using the Escherichia coli extracts. Different expression vectors were investigated and 175μg/ml total ODR-10 was achieved with pIVEX2.4c. To obtain soluble ODR-10, different detergents and liposome with varied concentrations were respectively added into the CF system. High-level expression of soluble ODR-10 (150μg/ml) was attained with the addition of 1.5% polyoxyethylene-(20)-cetyl-ether (Brij58) into the CF system. Furthermore, the yield of total ODR-10 was improved to 350μg/ml by supplementing liposomes into the CF system, and the maximal concentration of the soluble receptor (102μg/ml) was achieved in this liposome-assisted CF system. Both strategies produced ODR-10 efficiently by using CF system, and the direct reconstitution of the in vitro expressed receptor into liposomes will be preferred for its potential applications in many areas.

Lipid–protein nanodiscs for cell-free production of integral membrane proteins in a soluble and folded state: Comparison with detergent micelles, bicelles and liposomes

Production of integral membrane proteins (IMPs) in a folded state is a key prerequisite for their functional and structural studies. In cell-free (CF) expression systems membrane mimicking components could be added to the reaction mixture that promotes IMP production in a soluble form. Here lipid–protein nanodiscs (LPNs) of different lipid compositions (DMPC, DMPG, POPC, POPC/DOPG) have been compared with classical membrane mimicking media such as detergent micelles, lipid/detergent bicelles and liposomes by their ability to support CF synthesis of IMPs in a folded and soluble state. Three model membrane proteins of different topology were used: homodimeric transmembrane (TM) domain of human receptor tyrosine kinase ErbB3 (TM-ErbB3, 1TM); voltage-sensing domain of K+ channel KvAP (VSD, 4TM); and bacteriorhodopsin from Exiguobacterium sibiricum (ESR, 7TM). Structural and/or functional properties of the synthesized proteins were analyzed. LPNs significantly enhanced synthesis of the IMPs in a soluble form regardless of the lipid composition. A partial disintegration of LPNs composed of unsaturated lipids was observed upon co-translational IMP incorporation. Contrary to detergents the nanodiscs resulted in the synthesis of ~80% active ESR and promoted correct folding of the TM-ErbB3. None of the tested membrane mimetics supported CF synthesis of correctly folded VSD, and the protocol of the domain refolding was developed. The use of LPNs appears to be the most promising approach to CF production of IMPs in a folded state. NMR analysis of 15N-Ile-TM-ErbB3 co-translationally incorporated into LPNs shows the great prospects of this membrane mimetics for structural studies of IMPs produced by CF systems.

Efficient Expression of Aquaporin Z in Escherichia coli Cell-Free System Using Different Fusion Vectors

Aquaporin Z (AqpZ) is a typical orthodox aquaporin with 6 transmembrane domains and five connecting loops. In order to express this complex membrane protein efficiently, E. coli cell-free expression system was employed as an alternative to produce aquaporin Z. Using different fusion vectors containing AqpZ gene, the expression level of fusion proteins in cell-free system varied from 7.97 to 578.35 microg/ml, while 7.34 to 340.81 microg/ml for target protein (AqpZ). The free energy of mRNA secondary structure at translation initiation region (TIR) was predicted and demonstrated a positive relationship with the expression level of AqpZ in cell-free system. This is the first report of expressing water channel protein in E. coli cell-free system, which has become a highly promising tool for fast and efficient production of integral membrane proteins.

High yield cell-free production of integral membrane proteins without refolding or detergents

Integral membrane proteins act as critical cellular components and are important drug targets. However, difficulties in producing membrane proteins have hampered investigations of structure and function. In vivo production systems are often limited by cell toxicity, and previous in vitro approaches have required unnatural folding pathways using detergents or lipid solutions. To overcome these limitations, we present an improved cell-free expression system which produces high yields of integral membrane proteins without the use of detergents or refolding steps. Our cell-free reaction activates an Escherichia coli-derived cell extract for transcription and translation. Purified E. coli inner membrane vesicles supply membrane-bound components and the lipid environment required for insertion and folding. Using this system, we demonstrated successful synthesis of two complex integral membrane transporters, the tetracycline pump (TetA) and mannitol permease (MtlA), in yields of 570 ± 50 μg/mL and 130 ± 30 μg/mL of vesicle-associated protein, respectively. These yields are up to 400 times typical in vivo concentrations. Insertion and folding of these proteins are verified by sucrose flotation, protease digestion, and activity assays. Whereas TetA incorporates efficiently into vesicle membranes with over two-thirds of the synthesized protein being inserted, MtlA yields appear to be limited by insufficient concentrations of a membrane-associated chaperone.

The Funnel Approach to the Precrystallization Production of Membrane Proteins

Challenges in the production of integral membrane proteins for structural studies include low expression levels, incorrect membrane insertion, aggregation and instability. In this report, we describe a “funnel approach” to overcoming these difficulties and demonstrate its efficacy in a case study of 36 prokaryotic P-type transporters. A diverse ensemble of modified constructs is generated and tested for expression in Escherichia coli, membrane localization, detergent extraction, and homogeneity. High-throughput methodologies are implemented throughout the process to facilitate identification of promising targets. We find that the choice of promoter, the choice of source organism providing the cloned gene, and, most importantly, the position of the affinity tag have a great effect on successful production. The latter had pronounced effects at all tested levels, from expression levels observed in whole cells to the extent of membrane insertion, and even on protein function. Following the initial streamlined screening, we were able to fine-tune and produce 9 of the 36 targets as materials suitable for crystallization or other structural studies.

Cell‐free expression as an emerging technique for the large scale production of integral membrane protein

Membrane proteins are highly underrepresented in structural data banks due to tremendous difficulties that occur upon approaching their structural analysis. Inefficient sample preparation from conventional cellular expression systems is in many cases the first major bottleneck. Preparative scale cell-free expression has now become an emerging alternative tool for the high level production of integral membrane proteins. Many toxic effects attributed to the overproduction of recombinant proteins are eliminated by cell-free expression as viable host cells are no longer required. A unique characteristic is the open nature of cell-free systems that offers a variety of options to manipulate the reaction conditions in order to protect or to stabilize the synthesized recombinant proteins. Detergents or lipids can easily be supplemented and membrane proteins can therefore be synthesized directly into a defined hydrophobic environment of choice that permits solubility and allows the functional folding of the proteins. Alternatively, cell-free produced precipitates of membrane proteins can efficiently be solubilized in mild detergents after expression. Highly valuable for structural approaches is the fast and efficient cell-free production of uniformly or specifically labeled proteins. A considerable number of membrane proteins from diverse families like prokaryotic small multidrug transporters or eukaryotic G-protein coupled receptors have been produced in cell-free systems in high amounts and in functionally active forms. We will give an overview about the current state of the art of this new approach with special emphasis on technical aspects as well as on the functional and structural characterization of cell-free produced membrane proteins.

Evaluation of detergents for the soluble expression of α‐helical and β‐barrel‐type integral membrane proteins by a preparative scale individual cell‐free expression system

Cell-free expression has become a highly promising tool for the fast and efficient production of integral membrane proteins. The proteins can be produced as precipitates that solubilize in mild detergents usually without any prior denaturation steps. Alternatively, membrane proteins can be synthesized in a soluble form by adding detergents to the cell-free system. However, the effects of a representative variety of detergents on the production, solubility and activity of a wider range of membrane proteins upon cell-free expression are currently unknown. We therefore analyzed the cell-free expression of three structurally very different membrane proteins, namely the bacterial alpha-helical multidrug transporter, EmrE, the beta-barrel nucleoside transporter, Tsx, and the porcine vasopressin receptor of the eukaryotic superfamily of G-protein coupled receptors. All three membrane proteins could be produced in amounts of several mg per one ml of reaction mixture. In general, the detergent 1-myristoyl-2-hydroxy-sn-glycero-3-[phospho-rac-(1-glycerol)] was found to be most effective for the resolubilization of membrane protein precipitates, while long chain polyoxyethylene-alkyl-ethers proved to be most suitable for the soluble expression of all three types of membrane proteins. The yield of soluble expressed membrane protein remained relatively stable above a certain threshold concentration of the detergents. We report, for the first time, the high-level cell-free expression of a beta-barrel type membrane protein in a functional form. Structural and functional variations of the analyzed membrane proteins are evident that correspond with the mode of expression and that depend on the supplied detergent.