Product Channels Research Articles

Gravitational waves from axion wave production

AbstractWe consider a scenario with axions/axion-like particles Chern–Simons gravity coupling, such that gravitational waves can be produced directly from axion wave parametric resonance in the early universe after inflation. This axion gravity term is less constrained compared to the well-searched axion photon coupling and can provide a direct and efficient production channel for gravitational waves. Such stochastic gravitational waves can be detected by either space/ground-based gravitational wave detectors or pulsar timing arrays for a broad range of axion masses and decay constants.

Probing protoneutron stars with gamma-ray axionscopes

Axion-like particles (ALPs) coupled to nucleons can be efficiently produced in the interior of protoneutron stars (PNS) during supernova (SN) explosions. If these ALPs are also coupled to photons they can convert into gamma rays in the Galactic magnetic field. This SN-induced gamma-ray burst can be observable by gamma-ray telescopes like Fermi-LAT if the SN is in the field of view of the detector. We show that the observable gamma-ray spectrum is sensitive to the production processes in the SN core. In particular, if the nucleon-nucleon bremsstrahlung is the dominant axion production channel, one expects a thermal spectrum with average energy E a ≃ 50 MeV. In this case the gamma-ray spectrum observation allows for the reconstruction of the PNS temperature. In case of a sizable pion abundance in the SN core, one expects a second spectral component peaked at E a ≃ 200 MeV due to axion pionic processes. We demonstrate that, through a dedicated LAT analysis, we can detect the presence of this pionic contribution, showing that the detection of the spectral shape of the gamma-ray signal represents a unique probe of the pion abundance in the PNS.

Ether and ester formation from peroxy radical recombination: a qualitative reaction channel analysis

Abstract. The least volatile organic compounds participating in atmospheric new-particle formation are very likely accretion products from self- and cross-reactions of peroxy radicals (RO2). It has long been assumed that the only possible accretion product channel in this reaction is that forming a peroxide (RO2+RO2→ROOR+O2), but it has recently been discovered that a rapid alkoxy radical (RO) decomposition may precede the accretion step of the mechanism, forming slightly fragmented but more stable ether (ROR) or ester (RC′(O)OR) accretion products. In this work, the atmospheric implications of this new reaction channel have been explored further by using a modified version of the Generator for Explicit Chemistry and Kinetics of Organics in the Atmosphere (GECKO-A) software to generate a large amount of representative RO2 + RO2 reactive pairs formed from the oxidation of typical primary hydrocarbons and by applying structure–activity relationships (SARs) to predict the potential accretion products. These data are analysed in terms of the formation of low-volatility products, and new discoveries are presented on what types of RO2 are especially efficient (and which are surprisingly inefficient) at forming accretion products. These findings are discussed in terms of the atmospheric relevance of these new RO2 + RO2 reaction channels. As the generation of these data rests on several simplifications and assumptions, many open questions worthy of later studies are also raised.

Pricing policies of dual-channel green supply chain: considering manufacturers’ dual behavioural preferences and government subsidies

As the green economy and e-commerce evolve, some manufacturers begin to engage in green production and use online direct channels to enhance competitiveness. However, the additional cost of green production makes manufacturers often show dual behavioural preferences of fairness concern and risk aversion when making decisions. Based on this, this study constructs the optimal pricing model of a dual-channel green supply chain, considering dual behavioural preferences of manufacturers’ fairness concern and risk aversion. In addition, no government subsidy, government research and development cost subsidy and green degree subsidy are also considered. This paper uses the Stackelberg game to find the optimal solution for the model. The findings illustrate that (1) Government subsidy mechanisms cannot coordinate the effects of manufacturers’ dual behavioural preferences on pricing policies of a dual-channel green supply chain. (2) Under the three different government subsidy conditions, manufacturers’ fairness concern and risk aversion will all reduce the green degree of products and online direct price of products. (3) The government research and development cost subsidy and green degree subsidy can both improve the green degree of products, offline retail price, market demand and members’ expected profits.

Enhanced Extreme Mass Ratio Inspiral Rates and Intermediate Mass Black Holes.

Extreme mass ratio inspirals (EMRIs) occur when stellar-mass compact objects begin a gravitational wave (GW) driven inspiral into massive black holes. EMRI waveforms can precisely map the surrounding spacetime, making them a key target for future space-based GW interferometers such as LISA, but their event rates and parameters are massively uncertain. One of the largest uncertainties is the ratio of true EMRIs (which spend at least thousands of orbits in the LISA band) and direct plunges, which are in-band for at most a handful of orbits and are not detectable in practice. In this Letter, we show that the traditional dichotomy between EMRIs and plunges-EMRIs originate from small semimajor axes, plunges from large-does not hold for intermediate-mass black holes with masses M_{•}≲10^{5}M_{⊙}. In this low-mass regime, a plunge always has an O(1) probability of failing and transitioning into a novel "cliffhanger" EMRI. Cliffhanger EMRIs are more easily produced for larger stellar-mass compact objects, and are less likely for smaller ones. This new EMRI production channel can dominate volumetric EMRI rates n[over ˙]_{EMRI} if intermediate-mass black holes are common in dwarf galactic nuclei, potentially increasing n[over ˙]_{EMRI} by an order of magnitude.

Supply Chain Channel Strategy and Marketing Performance of Agricultural Products Firms in Nigeria

Even with the expansion of the vendor network supply chain channel strategy research and the development of the nation's agricultural industry, there seems to be no empirical research on supply chain channel strategy as it relates to marketing performance of agricultural products’ firms. Particularly, it appears that there have not been studies on the relationship between supply chain channel strategy formulation within the agricultural industry in Nigeria. The lack of literature by scholars with respect to supply chain channel strategy in the agricultural industry to trigger innovations in channel techniques and strategies could properly be the root cause of ineffective marketing performance of agricultural products’ firms in terms of customer’s service, profitability and product availability. The researchers therefore sought to discuss this limitation, thereby bridging the acknowledged gap. Based on the objective of the study, a systematic survey was utilized to obtain information from 376 management staff of agricultural product enterprises, and three hypotheses were developed. The data were analyzed using descriptive and inferential statistical techniques. The results demonstrated a favorable and significant association between marketing success of agricultural product companies and channel management. It was concluded that if supply chain channel strategy is well implemented, there would be an increase in marketing performance as measured by client fulfillment, profitability and product availability. Considering the results, it was recommended that sales, supply chain and marketing managers should manage their supply chain channels by placing more emphasis on channel strategy.

Research on Production Behavior of A Fractured Well in Gas Hydrate Reservoirs Considering Multilayer

Abstract Natural gas hydrates are internationally recognized as a new clean energy source with high prospects for commercial development. However, the vast majority of hydrates are hosted in oceanic clayey silty sediments, which are inefficient to exploit due to the extremely low effective permeability. In this paper, a novel development mode, that is, multilayer commingled production with a hydraulically fractured well, is proposed for the multilayered reservoir where hydrate and free gas coexist, to enhance productivity. Especially, the co-production behavior was numerically investigated, with the multilayered reservoir containing a hydrate-bearing layer, a three-phase layer, and a free gas layer located in the Shenhu Area as the geological background. The results indicated that the fracture provided flow channels for gas production in the multilayer, as well as greatly increasing the pressure drop spreading zone and changing the hydrate decomposition mode from around the wellbore to along the fracture surface. Compared with improving the fracture conductivity, increasing the fracture length is more effective for improving hydrate decomposition efficiency and co-production capacity. Specifically, when the fracture half-length was 30 m and the fracture conductivity was 100 D·cm, the cumulative gas production reached 949×104 m3 at 3600 days, which was 3.28 times that of the unfractured scenario. Additionally, fracturing the free gas layer hardly affects productivity as the free gas can be well-recovered by the wellbore. Overall, the proposed mode is promising for multilayered gas hydrate reservoirs, provides references for the co-production plan design, and contributes to the scale mining of hydrates.

Observation of New Charmonium or Charmoniumlike States in B^{+}→D^{*±}D^{∓}K^{+} Decays.

A study of resonant structures in B^{+}→D^{*+}D^{-}K^{+} and B^{+}→D^{*-}D^{+}K^{+} decays is performed, using proton-proton collision data at center-of-mass energies of sqrt[s]=7, 8, and 13TeV recorded by the LHCb experiment, corresponding to an integrated luminosity of 9 fb^{-1}. A simultaneous amplitude fit is performed to the two channels with contributions from resonances decaying to D^{*-}D^{+} and D^{*+}D^{-} states linked by C parity. This procedure allows the C parities of resonances in the D^{*±}D^{∓} mass spectra to be determined. Four charmonium or charmoniumlike states are observed decaying into D^{*±}D^{∓}: η_{c}(3945), h_{c}(4000), χ_{c1}(4010), and h_{c}(4300), with quantum numbers J^{PC} equal to 0^{-+}, 1^{+-}, 1^{++}, and 1^{+-}, respectively. At least three of these states have not been observed previously. In addition, the existence of the T_{c[over ¯]s[over ¯]0}^{*}(2870)^{0} and T_{c[over ¯]s[over ¯]1}^{*}(2900)^{0} resonances in the D^{-}K^{+} mass spectrum, already observed in the B^{+}→D^{+}D^{-}K^{+} decay, is confirmed in a different production channel.

Calculations of Dissociation Dynamics of CH3OH on a Global Potential Energy Surface Reveal the Mechanism for the Formation of HCOH; Roaming Plays a Role.

The experimental observation of hydroxymethylene, HCOH, following excitation of methanol at 193 nm, was reported recently (Hockey, E. K.; McLane, N.; Martí, C.; Duckett, L.; Osborn, D. L.; Dodson, L. G. Direct Observation of Gas-Phase Hydroxymethylene: Photoionization and Kinetics Resulting from Methanol Photodissociation. J. Am. Chem. Soc. 2024, 146, 14416-14421, 10.1021/jacs.4c03090). This stimulated us to investigate a dynamic mechanism for its formation using a global potential energy surface for the ground electronic state (S0) of methanol. We show via quasi-classical trajectory calculations that hydroxymethylene is indeed formed under the reasonable assumption that the initially excited state undergoes rapid internal conversion to S0. From the trajectories, fractional yields of the six major product channels are determined as a function of excitation energy, and the rate of production of each is determined from the fractions and rate of methanol disappearance. Roaming is observed in trajectories leading to the OH and CH3 products as well as in those leading to CH2OH + H and non-reactive trajectories. A "frustrated" roaming accounts for roughly 20% of the HCOH production.

Examining the relationship between channel disintermediation and chemical fertilizer application: Empirical evidence from smallholder farmers in central China

AbstractDigital advancements have reshaped the sales channels for industrial products like chemical fertilizers, allowing for the elimination of certain intermediaries. Utilizing survey data from 1374 rice‐growing smallholder farmers across counties in central China, this study explored the impact of disintermediation in chemical fertilizer sales channels on application rates among smallholder farmers. Benchmark regression analyses indicated that channel disintermediation significantly decreased chemical fertilizer application across various scenarios. Additionally, the alignment of contractual factors and technical services between chemical suppliers and farmers, facilitated by disintermediation, reduced chemical fertilizer application. Heterogeneity analysis revealed that the reduction in chemical fertilizer application due to channel disintermediation was more pronounced among farmers with higher digital literacy or lower production capacity. These findings highlighted the importance of encouraging chemical suppliers with direct‐to‐consumer channels to enhance their technical services and increase supervision over the quality of their products and services, thereby building trust among farmers and facilitating their adaptation to changes in the sales channel structure.

Exploring interference effects between two ALP effective operators at the LHC

We observe that most studies of axion-like particle (ALP) production channels at the Large Hadron Collider (LHC) focus on a single type of ALP operator for each process in the effective field theory framework. In this work, we propose an alternative approach that considers two or more types of relevant ALP effective operators together in some specific ALP production channels and study their interference effects. Using the pp → tja process with a → γγ as an example, we show that this approach allows us to constrain the ALP interactions with both the W boson and the top quark, as well as their interference in a single process. For the final state with two isolated photons and a top quark decaying semi-leptonically, we predict that the future bounds on the ALP decay constant can reach around fa ~ 10 (20) TeV for 25 GeV < Ma < 100 GeV at the LHC with 300 (3000) fb−1 luminosity.

A Single Multiplex PCR and Single-Nucleotide Extension Assay for the Detection of Common Thanatophoric Dysplasia I and II Mutations

Mutation analysis is used to provide confirmation of a clinical and radiological diagnosis of Thanatophoric dysplasia types I and II (TDI & II). We developed a single multiplexed PCR and a single nucleotide extension (SNE) assay to identify 14 common mutations causing 99% of TD I and TD II, including the challenging three adjacent mutations in the stop codon of exon 18 of the FGFR3 gene. The assay design also provides a solution for resolving SNE PCR product sizing using performance optimized polymer-7 (POP-7).The assay was validated using thirty-seven previously characterized, de-identified patient samples representing the nine wild-types and 10/14 mutant genotypes. Four artificial templates were synthesized to mimic four TD I mutations not represented in the available patient samples. Fragment size and fluorophore channel for each SNE product from 10 samples and the four artificial templates were used to define bins and panels for analysis with GeneMarker v3.0 and GeneMapper v6.0 software. Allele calls (bin placement within the panels) were verified using the remaining 27 previously characterized samples.This TD I and II PCR and SNE assay is a robust multiplexed assay, streamlined, to identify 14 mutations in one single reaction. Turnaround time required for this assay performance and analysis is decreased in comparison to traditional Sanger or next generation sequencing.

The Influence of Marketing Mix Strategies for Savings Plus (BNI Taplus) Products on the Level of Customer Satisfaction at Pt. Bank Negara Indonesia (Persero) Tbk Supporting Branch Office (KCP) Wisma Bumiputera Jakarta

Mix marketing is something that can carried out by the company for influence request will its products consist of on four groups, namely: product, price, promotion and place or channel distribution. Research purposes This is For Know the mix strategy marketing product savings plus (BNI Taplus), view factors considered customers in choose BNI Taplus products and see How influence mix marketing to level satisfaction customers. In measuring level satisfaction customers, there is four dimensions mix marketing among them product, price, place and promotion to satisfaction customers. Research methods this, that is study quantitative. Study quantitative is a research analysis in a way general use analysis statistics. Whereas type research used is type study survey, that is research that takes sample from One population and use questionnaire as tool basic data measurements. Sample in research This that is BNI Taplus customers at PT. Bank Negara Indonesia (Persero) Tbk KCP Wisma Bumiputera Jakarta as many as 50 respondents. The design used in study This is method descriptive analysis that is trying method look for description comprehensive about data, facts, events Actually about object research and for research data analysis This using multiple linear regression test, coefficient test determination, f-test, and t-test. Based on results research and f-test results (simultaneous) show that factors mix marketing influential positive to satisfaction customers. The results of the t-test (partial) are influential positive in a way significant to satisfaction customers is variable product, meanwhile variable price, place, promotion influential positive but no significant to satisfaction customers. Meanwhile, contribution variable mix marketing to satisfaction customers indicated by the coefficient determination already customized of 0.223 meaning that mix marketing (product, price, place and promotion) is influential to satisfaction customers amounted to 29.00% while the rest 71.00 % is influenced by other variables outside the model used by the author. Research result This getting R= 0.535 shows R is almost approach number 1, meaning between variable mix marketing (product, price, place and promotion) towards satisfaction customers have influence.

Probing new physics at the LHC and future colliders: SMEFT and beyond

In this talk, I review our progresses on probing new physics at the LHC and future colliders by using the Standard Model Effective Field Theory (SMEFT) and beyond. This includes to probe new physics effects in the Higgs boson couplings via leading dimension-6 operators and in the neutral triple gauge couplings (nTGCs) via leading dimension-8 operators. I also discuss the probe of Higgs self-couplings involving the SM Higgs-boson-pair plus a new heavy Higgs boson of the extended Higgs sector via the resonant diHiggs production channels.

Dynamics of the Cl + CH3CN reaction on an automatically-developed full-dimensional abinitio potential energy surface.

A full-dimensional analytical potential energy surface (PES) is developed for the Cl + CH3CN reaction following our previous work on the benchmark abinitio characterization of the stationary points. The spin-orbit-corrected PES is constructed using the Robosurfer program and a fifth-order permutationally invariant polynomial method for fitting the high-accuracy energy points determined by a ManyHF-based coupled-cluster/triple-zeta-quality composite method. Quasi-classical trajectory simulations are performed at six collision energies between 10 and 60kcal mol-1. Multiple low-probability product channels are found, including isomerization to isonitrile (CH3NC), but out of the eight possible channels, only the H-abstraction has significant reaction probability; thus, detailed dynamics studies are carried out only for this reaction. The cross sections and opacity functions show that the probability of the H-abstraction reaction increases with increasing collision energy (Ecoll). Scattering angle, initial attack angle, and product relative translational energy distributions indicate that the mechanism changes with the collision energy from indirect/rebound to direct stripping. The distribution of initial attack angles shows a clear preference for methyl group attack but with different angles at different Ecoll values. Post-reaction energy distributions show that the energy transfer is biased toward the products' relative translational energy instead of their internal energy. Rotational and vibrational energy have about the same amount of contribution to the internal energy in the case of both products (HCl and CH2CN), i.e., both of them are formed with high rotational excitations. HCl is produced mostly in the ground vibrational state, while a notable fraction of CH2CN is formed with vibrational excitation.

Simulating heavy neutral leptons with general couplings at collider and fixed target experiments

Heavy neutral leptons (HNLs) are motivated by attempts to explain neutrino masses and dark matter. If their masses are in the MeV to several GeV range, HNLs are light enough to be copiously produced at collider and accelerator facilities, but also heavy enough to decay to visible particles on length scales that can be observed in particle detectors. Previous studies evaluating the sensitivities of experiments have often focused on simple but not particularly well-motivated models in which the HNL mixes with only one active neutrino flavor. In this work, we accurately simulate models for HNL masses between 100 MeV and 10 GeV and arbitrary couplings to e, μ, and τ leptons. We include over 150 HNL production channels and over 100 HNL decay modes, including all of the processes that can be dominant in some region of the general parameter space. The result is , a user-friendly, fast, and flexible library to compute the properties of HNL models. As examples, we implement to extend the package to evaluate the prospects for HNL discovery at forward LHC experiments. We present sensitivity reaches for FASER and FASER2 in five benchmark scenarios with coupling ratios |Ue|2∶|Uμ|2∶|Uτ|2=1∶0∶0, 0∶1∶0, 0∶0∶1, 0∶1∶1, and 1∶1∶1, where the latter two have not been studied previously. Comparing these to current constraints, we identify regions of parameter space with significant discovery prospects. Published by the American Physical Society 2024

Unveiling the Influence of Water Molecules for NF3 Removal by the Reaction of NF3 with OH: A DFT Study.

The removal of nitrogen trifluoride (NF3) is of significant importance in atmospheric chemistry, as NF3 is an important anthropogenic greenhouse gas. However, the radical species OH and O(1D) in atmospheric conditions are nonreactive towards NF3. It is necessary to explore possible ways to remove NF3 in atmosphere. Therefore, the participation of water molecules in the reaction of NF3 with OH was discussed, as water is abundant in the atmosphere and can form very stable complexes due to its ability to act as both a hydrogen bond donor and acceptor. Systemic DFT calculations carried out at the CBS-QB3 and ωB97XD/aug-cc-pVTZ level of theory suggest that water molecules could affect the NF3 + OH reaction as well. The energy barrier of the SN2 mechanism was decreased by 8.52 kcal/mol and 10.58 kcal/mol with the assistance of H2O and (H2O)2, respectively. Moreover, the presence of (H2O)2 not only reduced the energy barrier of the reaction, but also changed the product channels, i.e., formation of NF2O + (H2O)2-HF instead of NF2OH + (H2O)2-F. Therefore, the removal of NF3 by reaction with OH is possible in the presence of water molecules. The results presented in this study should provide useful information on the atmospheric chemistry of NF3.

Application of the new simple weight calculation (SIWEC) method in the case study in the sales channels of agricultural products

In this research is presented a new method for determining the weights of criteria called simple weight calculation (SIWEC) method. The steps of this method are presented in the practical example of determining the importance of criteria for the needs of sales of agricultural products in the Semberija region. During the presentation of this method two methods are elaborated the simple SIWEC method which includes numerical ratings and the fuzzy SIWEC method which includes ratings in the form of linguistic value. In the selected example is presented how to use this method in order to determine the importance of criteria and in both cases the criterion of sales reliability is given the greatest weight. The contribution SIWEC method is reflected in its simplicity, which facilitates decision-making.•The method presented in this research apart from others is that it uses the evaluation of the criteria by decision makers, so the criteria should not be ranked and compared, but simply evaluated.•Unlike similar methods, the presented method uses the adjusted steps of the method for ranking the alternatives, and decision makers are given a different importance in the decision-making.

Interplay of freeze-in and freeze-out: Lepton-flavored dark matter and muon colliders

We study a lepton-flavored dark matter model and its signatures at a future muon collider. We focus on the less-explored regime of feeble dark matter interactions, which suppresses the dangerous lepton-flavor-violating processes, gives rise to dark matter freeze-in production, and leads to long-lived particle signatures at colliders. We find that the interplay of dark matter freeze-in and its mediator freeze-out gives rise to an upper bound of around TeV scales on the dark matter mass. The signatures of this model depend on the lifetime of the mediator and can range from generic prompt decays to more exotic long-lived particle signals. In the prompt region, we calculate the signal yield, study useful kinematics cuts, and report tolerable systematics that would allow for a 5σ discovery. In the long-lived region, we calculate the number of charged tracks and displaced lepton signals of our model in different parts of the detector and uncover kinematic features that can be used for background rejection. We show that, unlike in hadron colliders, multiple production channels contribute significantly, which leads to sharply distinct kinematics for electroweakly charged long-lived particle signals. Ultimately, the collider signatures of this lepton-flavored dark matter model are common among models of electroweak-charged new physics, rendering this model a useful and broadly applicable benchmark model for future muon collider studies that can help inform work on detector design and studies of systematics. Published by the American Physical Society 2024

Micropore effects on coal pyrolysis process investigated by using reactive molecular dynamics

The micropore structure can serve as the diffusion channels for intermediates and light tar products during coal pyrolysis, which is very important for modulating the desired tar or char products. In this work, the micropore effects on product distribution and the reaction mechanisms during Hailaer coal pyrolysis was explored for the first time from the atomistic simulation point of view by using large-scale ReaxFF MD simulation and the reasonable model with the artificially adding micropore strategy. The results suggest that the micropore structure indeed has a significant impact on the major tar product distribution and competitive reactions during coal pyrolysis process at high temperature. The micropore can promote decomposition reactions through accelerating C–C bond breaking significantly and inhibit the recombination reactions accompanied with the char formation with more carbon in sp2 structure. Based on the oxygen-containing bond behaviors in char products obtained from coal pyrolysis process, it is unraveled that the more micropore exits in coal structure, the more Csp3-O bonds and less Csp2-O bonds in char precursors. Particularly, the light tar products with ring groups are more influenced by micorpore structures than those chain products. Considering that the limitation of current experimental techniques in micropore detection, the strategy sheds new light on the depth investigation of micropore effects on reactions, which can provide complement for experimental observations and tar product modulation.