Prevention Technologies Research Articles

Technical Feasibility Analysis of Digital Twin Technology in the Field of Urban Disaster Prevention

Abstract. In recent years, disasters have occurred frequently around the world, causing great harm to national finances and people's safety. There is still a lack of research on digital disaster prevention technology, but with the development of technologies such as artificial intelligence and computer vision, it has gradually become possible to use digital twin technology in urban disaster prevention. This paper is mainly based on digital twin related technologies, briefly introduces the concept and importance of digital twins, and the applicable fields, and then discusses the mode of data interaction between real entities and twins and the feasibility of digital disaster prevention, so as to prevent and simulate urban disasters and derive strategies for dealing with disasters. This paper reviews the existing research on digital twin technology through the method of literature retrieval and analysis. By analyzing technologies such as the Internet of Things, sensors, three-dimensional laser technology, urban monitoring technology, satellite remote sensing technology, drone remote sensing technology, mobile device technology, lidar technology, and oblique photography, a systematic review of critical analysis is obtained, and a macro method of data interaction and modeling for digital twin technology for disaster prevention is obtained, thereby deriving the feasibility of disaster prevention based on digital twin systems.

Assessing the Efficacy of Gene-Drive Technology in Reducing Malaria Transmission in Sub-Saharan Africa: Current Progress and Future Prospects

Malaria continues to pose a significant public health challenge in Sub-Saharan Africa, necessitating innovative solutions to combat its transmission. This review examined the efficacy of gene-drive technology as a novel approach to reducing malaria transmission through genetic modifications of Anopheles mosquitoes. Utilizing a comprehensive literature review and analysis of experimental studies and pilot projects, we assessed the mechanisms of gene drives, including population suppression and replacement strategies. The findings indicated that gene-drive technology has the potential to significantly alter mosquito populations, thereby diminishing the burden of malaria. However, challenges such as ecological concerns, regulatory complexities, and public acceptance must be addressed for successful implementation. The integration of gene drives with existing malaria control measures, collaborative research efforts, and robust ethical governance is crucial for maximizing effectiveness and ensuring sustainable outcomes. Furthermore, monitoring and evaluation systems are essential for assessing the safety and efficacy of gene-drive initiatives. This review underscored the transformative potential of gene-drive technology in malaria prevention, advocating for continued dialogue among stakeholders to navigate the complexities associated with its application in Sub-Saharan Africa. Keywords: Gene-drive technology, Malaria transmission, Anopheles mosquitoes, Public health, Sub-Saharan Africa.

Fire prevention and extinguishing technologies in coal spontaneous combustion: a bibliometric and systematic review

Fire prevention and extinguishing technologies in coal spontaneous combustion: a bibliometric and systematic review

Next-generation 3D printed multipurpose prevention intravaginal ring for prevention of HIV, HSV-2, and unintended pregnancy

Globally, nearly half of all pregnancies are unintended, ~1.3 million new human immunodeficiency virus (HIV) infections are reported every year, and more than 500 million people are estimated to have a genital herpes simplex virus (HSV-2) infection. Here we report the first 3D printed multipurpose prevention technology (MPT) intravaginal ring (IVR) for prevention of HIV, HSV-2, and unintended pregnancy. The IVRs were fabricated using state-of-the-art Continuous Liquid Interface Production (CLIP™) 3D printing technology using a biocompatible silicone-urethane based resin. Anti-HIV drug (Dapivirine, DPV), anti-herpes drug (Pritelivir, PTV) and a contraceptive drug (Levonorgestrel, LNG) were loaded in a macaque size IVR (25 mm outer diameter, OD; 6.0 mm cross-section, CS) allometrically scaled from the human size (54 mm OD; 7.6 mm CS) IVR analogue. All three active pharmaceutical ingredients (APIs) were loaded in the IVR using a single-step drug loading process driven by absorption. DPV, PTV, and LNG elicited zero-order release kinetics in vitro in simulated vaginal fluid (SVF) at pH 4 and pH 8 relevant to human and macaque vaginal pH respectively. CLIP 3D printed MPT IVRs remained stable after 6 months of storage at 4 °C with no change in physical, dimensional, or mechanical properties and no change in drug concentration and absence of drug degradation byproducts. The MPT IVRs elicited sustained release of all three APIs in macaques for 28 days with median plasma concentrations of 138 pg/mL (DPV), 18,700 pg/mL (PTV), and 335 pg/mL (LNG). Safety studies demonstrated that the MPT IVRs were safe and well tolerated in the macaques with no observed change or abnormalities in vaginal pH and no significant changes in any of the 22 mucosal cytokines and chemokines tested including pro-inflammatory (IL-1β, IL-6, IL-8, IFN-γ, TNF-α, IL-17, IL-18) and anti-inflammatory (IL-10, IL-12) cytokines while the MPT IVR was in place or after its removal. Additionally, MPT IVRs elicited no observed alterations in systemic CD4+ and CD8+ T cells during the entire study. Collectively, the proposed MPT IVR has potential to expand preventative choices for young women and girls against unintended pregnancy against two highly prevalent sexually transmitted infections (STIs).

Deprescribing oral antidiabetics in elderly patients: Do electronic leaflets across the world address it?

Diabetes caused 6.7 million deaths in 2021, equating to one death every five seconds, with its global financial burden projected to rise from $1.32 trillion in 2015 to $2.12 trillion by 2030. Severe hypoglycemia necessitates interventions like deprescribing, behavioral strategies, and technology for prevention. Deprescribing aims to reduce unnecessary medication use, enhance rational prescribing, prevent prescribing cascades, and improve health outcomes in elderly patients. Evaluating electronic leaflets can support deprescribing based on patient-centered care and shared decision-making. ObjectiveTo analyze information on deprescribing in oral antidiabetic leaflets from national medicines regulatory authorities, focusing on elderly patients with type 2 diabetes. MethodsThis documental study analyzed electronic leaflets of oral antidiabetics from the official websites of nine Medicines Regulatory Authorities: Australia, Brazil, Canada, New Zealand, Singapore, South Africa, UK, USA, and EU, covering drugs listed in the WHO's Essential Medicines List 2023. The analysis focused on the alignment of deprescribing information with the Ontario deprescribing algorithm for oral antidiabetics developed by the Bruyère Institute in Canada. ResultsOut of 72 expected leaflets, 64 (88.9 %) were retrieved. Only 18 leaflets (28.1 %) explicitly discussed deprescribing oral antihyperglycemics. Hypoglycemia and drug interaction risks were addressed in 55 leaflets (85.9 %). Caution for use in patients over 65 was mentioned in 32 leaflets (50 %), and 23 leaflets (35.9 %) addressed the risks of tight glucose and HbA1c targets. ConclusionDespite a high retrieval rate, 11.1 % of leaflets were missing, and those available contained inconsistent deprescribing information. There are significant disparities in guidance across regulatory authorities. Standardized, updated leaflets that address deprescribing in frail older patients could enhance prescribers' confidence and support shared decision-making

Research and application of hydraulic fracturing axial roof cutting technology for gently inclined hard roof based on abrasive jet

In order to explore a new method and mode of gently inclined hard roof treatment, the hydraulic fracturing axial roof cutting technology based on abrasive jet is introduced, and the key technical parameters of abrasive jet axial cutting and fracturing are determined based on indoor experiments and field industrial experiments. Taking the mining of working face under the condition of hard roof in Kuangou Coal Mine as the background, the implementation process and the effect of mining process are tested by means of water pressure gauge, drilling peep and observation well water level observation, mi-croseismic monitoring, support fracture monitoring and coal stress monitoring. The research results show that the key technical parameters of slotting and fracturing are mastered in the axial cutting test of abrasive jet. Wherein the kerf depth is 200 m, the kerf length is 300 m, the kerf pressure is 40–50 mpa, the fracturing pressure is 50–55 mpa, and the fracturing time is 20–30 min. After grooving fracturing, the cracks in the roof strata are effectively generated and expanded, which destroys the integrity of the roof, and the fracturing radius is 10–20 m. During the mining period, compared with the tradi-tional blasting technology, the concentrated area of microseismic events was shifted from 80 m in front of the working face to 130 m after the combined treatment of abrasive jet axial roof cutting and blasting, and the microseismic energy release was mainly small energy events. After the application of abrasive jet axial roof cutting and scour prevention technology in hard roof, the periodic weighting step is obviously reduced, the influence range of mining stress and stress concentration coefficient are obviously reduced, the activity intensity and dynamic load effect of surrounding rock are obviously weakened. The research results provide a basis for effective prevention and control of rockburst disasters under the condition of hard roof.

Examining Circumstances Surrounding Fatal Pediatric Heatstroke in the United States

Fatal Pediatric Vehicular Heatstroke (PVH) is a preventable tragedy that claims the lives of an average of 38 children each year. The purpose of this article is to explore the relationship between fatal Pediatric Vehicular Heatstroke incidents and various circumstantial factors. Data was collected through customized online searches of electronic media using tools such as Google News and Lexis-Nexus. A set of linear regression analyses were conducted to examine the relationship between fatal PVH and three circumstantial variables: geographic region, time of day, and outside temperature. The finding show that specific U.S. Regions, Time of Day, and Outside Temperature significantly predicted fatal Pediatric Vehicular Heatstroke (PVH). Understanding these relationships can aid in the development of more targeted prevention technologies, legislation, and public education efforts aimed at reducing the risk of fatal PVH within the United States.

Study on the influence of aerosol atomization by ultrasonic atomization on coal spontaneous combustion

ABSTRACT Influenced by the complex environment and the nature of process materials in goaf, the prevention and control of spontaneous combustion of coal (CSC) in the deep part of goaf were facing many difficulties. To investigate the performance of ultrasonic atomized aerosols, a series of atomization experiments were conducted using a self-developed ultrasonic atomization device. The main conclusions are as follows: under the same atomization conditions, the atomized particle sizes of several inhibitors (except PAS-W) are concentrated in the <8 μm range, with a content of more than 88%, indicating that the aerosol particles produced by ultrasonic atomization are small in size and uniform in distribution. Compared with water and MgCl2 inhibitors, aerosol particles produced by PAS-W are less likely to pass through the voids of the coal body, and have poorer permeability and diffusivity. As the temperature increases, the viscosity and surface tension of the inhibitor decrease, and the percentage of aerosol particles with particle size <8 μm produced by ultrasonic atomization is more than 88%, indicating that the atomization effect is improved. After increasing the temperature, the contact angle between PAS-W inhibitor and coal reduces from 54.7° to 40.8°, and the wettability is better. Compared with raw coal, the final temperature of the PAS-W aerosol treated coal sample is delayed 21.86°C, and has significant retarding property. When the wind speed is 3 m/s, the effect of PAS-W aerosol particle generation, permeability, and particle size distribution is the best. The results of the study are of great significance in improving the ultrasonic atomized aerosol fire prevention technology and realizing large-scale CSC prevention in goaf.

Next-generation public health surveillance: extreme heat event prediction and monitoring system

Abstract Background Extreme Heat Events (EHEs) are a growing threat to public health. The increase in the frequency of occurrence of once rarer EHEs and the rise in their average temperatures are dangerously drastic for public health outcomes. Despite this, existing public health surveillance (PHS) systems fail to leverage IoT and AI technologies to facilitate real-time, continuous monitoring of EHE indicators and its associated health risks. This study closes this gap by proposing a comprehensive PHS system that can, in real-time monitor and predict EHE indicators to provide timely alerts to public health authorities. Methods The EHE PHS system collects EHE detection metrics, including indoor temperature and humidity levels, from IoT sensors and thermostats to map them across Canada, primarily focusing on low-income communities. The system also integrates historical climate data (surface temperature, humidity, wind speed and direction, and air quality indicators) from Environment Canada. The system uses the data to train initial prediction models including CNN, LSTM and GNN. The validated model will be integrated into the system, enabling real-time EHE prediction. The output will be displayed in user-friendly visualizations on the EHE PHS system’s dashboard capabilities. Results The system allows for the analysis of real-time data through dashboards and provides alerts when certain indicators (e.g. excessive or prolonged heat) detrimental to public health outcomes are detected. The alerts enable valuable lead time for public health authorities to implement proactive measures, such as issuing heat advisories and deploying resources to vulnerable areas. Conclusions The EHE PHS system will serve as a blueprint for global public health researchers, utilizing IoT and AI technologies for proactive crisis prevention. This knowledge will inform the development of heat-resilient policies and set a precedent for global public health crisis prevention. Key messages • The proposed EHE PHS system uses AI and IoT technologies, to enhance EHE prediction, risk identification, and real-time monitoring for effective public health interventions. • By integrating advanced predictive models and environmental data, the system facilitates early detection of EHE risk, which can significantly mitigate the health impact on vulnerable populations.

Innovative Approaches for Personalized Cardiovascular Prevention: the INNOPREV multicentric trial

Abstract Background Cardiovascular diseases (CVD) represent a major global health concern, requiring innovative primary prevention strategies. Personalized prevention, through the use of digital technologies and genetic risk scores (PRS), holds promise but requires further investigation to assess clinical efficacy. Consequently, the INNOPREV trial aims to investigate the efficacy of PRS and/or digital technologies in the uptake of CV preventive behaviors uptakes. Methods The INNOPREV trial is a multicenter randomized controlled trial conducted in Italy across three hospital centers in Rome, Catania, and Palermo. It aims to recruit 1020 participants aged 40-69 with a high 10-year CVD risk. Participants are allocated to traditional CVD risk assessment, or genetic testing, or digital interventions, or a combination of both. The study involves comprehensive CV risk assessments at baseline and follow-up visits at one, five, and twelve months. Data analysis will utilize mixed-effects models to analyze longitudinally collected data and explore potential moderators and mediators of behavior change. Results Preliminary results indicate good progress in recruitment, which currently stands at 250 participants (25% of expected). Recruited females have a mean age of 59 ± 6 years, while males have a mean age of 58 ± 6 years. Currently, PRS analyses indicate that 77% of participants have intermediate scores, and 23% have low scores. Follow-up will be essential to evaluate the efficacy of the proposed interventions. Conclusions We expect that the INNOPREV trial will provide evidence towards integration of innovative approaches based on PRS and digital devices, in the traditional preventive approaches for CVDs. Expectations are high based on the limited effectiveness of the current approaches in CV risk reduction based on lifestyle advice. Key messages • INNOPREV trial examines PRS and digital technology for CVD prevention, aiming to enhance preventive efficacy. Initial findings suggest promising potential for innovative CVD prevention strategies. • The INNOPREV trial aims to investigate the efficacy of personalized prevention strategies, including PRS and digital technologies, in improving cardiovascular preventive behaviors.

Hypertensive myocardial disease screening in low-income settings using smartphone-based technologies: a prospective multicenter trial

Abstract Background Mobile health technologies are revolutionizing cardiovascular (CV) medicine. However, more than 80% of heart disease related deaths occur in low-income settings, that are unable to take advantage of such technologies for healthcare awareness and prevention. Purpose To assess the feasibility of a pilot telemedicine-based CV screening campaign with D-Heart, a validated low-cost 8-lead smartphone portable ECG, coupled with blood-pressure (BP) monitoring in three regions of Africa. Methods A total of 950 patients (60%) men, age 29±21) were enrolled at 5 African rural dispensaries, 2 in Kenya, 2 in Senegal and at a hospital (Uganda). ECGs recording were obtained by community health workers with D- Heart smartphone ECG; BP was measured with a validated smartphone BP recorder. Global burden of ECG abnormalities was defined by a semi-quantitative score based on the sum of 9 criteria, identifying four classes of increasing severity. ECGs that were moderately and severely abnormal and from patients with severe hypertension, were sent for consultation via smartphone to D-Heart tele-cardiology centre: an advice on how to manage the patient was sent back to the community health worker’s smartphone within 15 minutes. If referral was needed, patients were sent to the local hospital. Results Mean BMI was 26.2 ± 8.5 (men 22.3±1.5 vs women 27.2±1.1, p&amp;lt;0.01). Active/recent history of smoking and alcohol intake were 327 (45%, 298 men) and 232/590 (40%, 198 men) respectively. A total of 142 (15%) patients had been previously diagnosed with diabetes, 199(25%) had known hypertension of whom 95/199 on treatment), whereas 43(4%) had a previous myocardial infarction. A total of 487 (51%) patients never had their blood pressure measured, whereas 798(91%) never received an ECG. Mean SBP/DBP were 138±31/71±12 mmHg respectively. Patients with normal BP were 304(32%), whereas 380(40%) were mildly-moderately hypertensive (SBP/DBP 148±7/91±5 mmHg) and 130 (29%) with severe hypertension (SBP/DBP 162±8/99±6 mmHg). D-Heart ECGs tracings were respectively classified as: normal: 361(38%); mildly abnormal: 332(35%); moderately abnormal: 199 (21%) and severely abnormal 58(6%). Most common ECG abnormality was a positive Romhilt-Estes index in 361, 38%. For 174(18%) patients smartphone tele-report advised referral to the local hospital, but only 121 69%) presented to the visit: 9 (8%) were found to have normal hearts, 57(47%) with hypertensive heart disease, 35 (29%) with rheumatic heart disease, 20 (16%) with HFrEF. Visit time was 8±2 minutes; cost of screening per patient was 1.10€: 0,30€ for consumable electrodes, 0.80€ for the community health worker visit time. Conclusions D-Heart ECG screening combined with smartphone BP measurement proved feasible and cost-effective. This should encourage to develop and extend low-cost/high-technology community-based CV screening programs in low-income settings.

Relationship network of safety management elements in the construction industry under the perspective of resilience

PurposeConstruction safety resilience is gradually gaining attention in the field of engineering construction as a new management concept and way to improve safety performance. However, how to cope with the dilemma of the unclear relationship of construction safety resilience elements at the practice level and promote the harmonization of construction safety goals and resilience enhancement paths has become an urgent challenge for safe construction.Design/methodology/approachThis study analyzes the components of construction safety resilience elements. A relationship network model of construction safety resilience elements is developed by using the social network analysis method. The location and influence of each element in the network and the interrelationships among the elements are explored in depth.FindingsThe findings reveal a robust interconnection among the elements of safety resilience in the construction industry. Key components such as safety behavior, risk prevention and control mechanisms, disaster prevention and mitigation technologies as well as information technology, are positioned at the core of the network. Notably, safety behavior exerts the most significant influence over the other elements, serving as the linchpin of safety management in the construction industry. Moreover, the interplay among safety resilience elements in the construction sector can alter the structure of the relationship network.Originality/valueThis study adopts the social network approach to solve the problem that it is difficult to quantitatively analyze the elements of construction safety resilience and their interrelationships and to clarify the interactions among the core elements, which can help to further assist the construction project manager to continuously optimize safety resilience and improve construction safety.

The use of technology and mobile health apps in child maltreatment interventions: Perspectives of TF-CBT therapists and SafeCare providers

BackgroundPrevious research has demonstrated positive effects of using technology as an augmentation to evidence-based youth mental health treatment and parenting programs, however, limited research has examined the use of technology in evidence-based child maltreatment (CM) prevention and treatment. ObjectivesThe purpose of this paper is twofold: 1) to understand the application of technology and mobile health apps in CM prevention and treatment programs and 2) examine the acceptability of CM programs with an evidence-informed app, JoyPop™, developed to promote resilience through emotion regulation. Participants and SettingTrauma-Focused Cognitive Behavioral Therapy (TF-CBT) therapists (N = 12) and SafeCare© providers (N = 12) were recruited and participated in virtual semi-structured interviews. MethodParticipants tested the JoyPop™ app over one week and were interviewed to assess their perspectives about and experiences using technology and mobile health apps in practice (aim 1) and the potential use of JoyPop™ as a program augmentation (aim 2). Data collection and analysis was guided by qualitative descriptive analysis. ResultsParticipants reported that technology and apps supporting positive coping strategies, including JoyPop™, are relevant to the goals of CM programs and can be used enhance client engagement and skill uptake. Participants noted that JoyPop™'s features more strongly align with the components of TF-CBT than Safecare. Limitations of technology use in practice are discussed. ConclusionsSupplementing CM programs with technology and mobile health apps may be used to bolster client engagement and positive outcomes. Future research is needed to address the efficacy and client acceptance of technology and app usage in practice.

Factors associated with carotid artery calcification in the general working-age population

Aim. To study factors associated with carotid artery calcification as an atherosclerotic marker in the general working-age population.Material and methods. The data of a representative ESSE-RF sample aged 25-64 years (n=1412) were studied. They underwent standard cardiology screening and assessment of carotid plaque (CP) characteristics using ultrasound. All respondents signed an informed consent to participate in the study. The association analysis included socio-demographic, anamnestic, laboratory, and ultrasound characteristics. Univariate and multivariate statistics were used.Results. The prevalence of detection of calcified CP (cCP) was 5,4% — 7,8% in men and 3,7% in women (odds ratio (OR)=2,2; p=0,001). The probability of cCP detection was associated with following factors: male sex (OR=3,9; p&lt;0,001), age (OR=1,2; p&lt;0,001), total cholesterol (women, OR=1,7; p=0,001), history of thyrotoxicosis (OR=2,1; p=0,034), osteoporosis (OR=2,6; p=0,009), and smoking (OR=1,8; p=0,046). The odds that the detected plaque would be calcified were higher in individuals in the 4th quartile of mean plaque size distribution (OR=3,8; p&lt;0,001) and in the presence of the following factors: male sex (OR=1,9; p=0,031), age ≥55 years (OR=4,3; p&lt;0,001), osteoporosis (OR=3,2; p=0,007), high-density lipoprotein cholesterol level ≥1,3 mmol/l (OR=2,0; p=0,025).Conclusion. The obtained data indicate an association of carotid calcification with both traditional cardiovascular risk factors and systemic diseases associated with impaired calcium and phosphorus metabolism (thyrotoxicosis, osteoporosis). The study results can be useful in practical healthcare, research, and developing preventive technologies.

Coal‐wall spalling prevention mechanism using advance‐grooving pressure relief in the large‐mining‐height working face of a shallow coal seam

AbstractIn mining, the roof structure of a working face with a large mining height in a shallow‐buried coal seam is prone to cutting instability in front of the support, which causes support crushing and coal‐wall spalling. This study analyzes 2201 working faces with large mining heights in the Haiwan No. 3 Mine by investigating the mechanical response law of coal walls under the transient excitation of roof structure instability. A mechanical model of coal walls under dynamic and static load coupling is established, revealing the formation mechanism of coal wall spalling and its main influencing factors. Prevention and control technologies of advanced grooving and pressure relief are proposed, and grooving parameters are determined. The results show that: During the mining process of large mining height working face in shallow buried coal seam, the step change of static response of coal wall is induced by the transient instability of roof structure, and the high abutment pressure is formed on the coal wall. At the same time, the strain energy and gravitational potential energy of roof cutting instability are released to form a dynamic load. Under the action of dynamic and static load, the plastic failure dissipation power of the coal wall is greater than the critical power, and the coal wall spalling occurs. The main influencing factors are mining load, mining height, and internal friction angle of the coal wall. The method of advanced grooving pressure relief can change the roof structure and coal force mechanism, by cutting off the connection between the coal wall and immediate roof, reducing the height of the coal wall force, effectively controlling the position of the roof cut off break line, reducing the static load effect of the roof on the coal, and transferring the position of the dynamic load response to the depth of the coal wall. When the grooving height‐depth ratio k is 0.75, the peak value of the abutment pressure moves 5.57 m to the front of the working face, and the pressure relief effect is the best. The above research results provide an effective active protection method for controlling coal wall spalling in fully mechanised working face with large mining height.

Advanced AI Technologies for Defect Prevention and Yield Optimization in PCB Manufacturing

The integration of Advanced Artificial Intelligence (AI) technologies in Printed Circuit Board (PCB) manufacturing has revolutionized the industry, offering significant improvements in defect prevention and yield optimization. As PCB manufacturing processes become increasingly complex and intricate, traditional methods of defect detection and quality assurance are often insufficient to meet the high demand for precision and efficiency. This paper explores the application of cutting-edge AI methodologies, including machine learning, computer vision, and neural networks, to address critical challenges in PCB production. The primary focus of this research is on the role of AI in enhancing automated defect detection systems and optimizing production yield. AI-based systems such as predictive maintenance, real-time process monitoring, and intelligent decision-making have been shown to drastically reduce defects while improving overall production throughput. Machine learning algorithms can identify subtle defects in real time, often undetectable by conventional methods, while neural networks can analyze historical data to predict potential failures before they occur. Additionally, AI-driven optimization techniques help manufacturers adjust production parameters dynamically, ensuring higher yields and minimizing waste. Through a combination of theoretical analysis and case studies, this paper highlights the effectiveness of AI-driven solutions in PCB manufacturing. Results from industry applications indicate significant improvements in both quality control and yield rates, providing a competitive edge to manufacturers adopting these technologies. Furthermore, this paper discusses future trends, including the integration of AI with the Internet of Things (IoT), edge computing, and sustainable manufacturing practices, which will further enhance the capabilities of AI systems in this field. The findings suggest that advanced AI technologies are not only capable of overcoming existing challenges in defect prevention but also hold the potential to reshape the future of PCB manufacturing by offering highly adaptive, precise, and efficient solutions. This research underscores the transformative impact of AI in modernizing manufacturing processes, making it an indispensable tool for the future of the PCB industry.

Minutes of the 15th academic conference on basic science and applied technology for prevention and control of infectious diseases

Minutes of the 15th academic conference on basic science and applied technology for prevention and control of infectious diseases

Compound disaster characteristics of rock burst and coal spontaneous combustion in island mining face: A case study

The island mining face in coal mines often encounters stress concentration and significant air leakage, elevating the risk of rock burst and spontaneous combustion of residual coal in the goaf. This study centers on the investigation of the 9305 island mining face within a mine situated in Shandong Province, China. Leveraging the features of coal spontaneous combustion and data from microseismic and gas monitoring throughout the mining process, a novel method for calculating safe mining speeds under compound disasters is introduced. The safe mining speed of the 9305 island mining face is stratified, and a prevention and control technology integrating long distance directional drilling for impact-spontaneous combustion compound disasters is proposed. Findings suggest that to mitigate spontaneous combustion of residual coal, considering the seam's spontaneous combustion tendency, the safe mining speed should exceed 3.7 m per day. Accounting for the distribution of microseismic events during coal seam extraction, the safe mining speed is maintained below 4.8 m per day in the unprotected mining area and capped at 8 m per day in the protected zone. Through a comprehensive analysis considering coal seam spontaneous combustion tendency, impact tendency, and time to coal seam oxidation to critical temperature, the safe mining speed for the island mining face ranges from 3.7 m per day to 4.8 m per day in the unprotected area and from 5.14 m per day to 8 m per day in the protected area. The proposed long distance directional drilling 'one hole, multiple purposes' scheme enables an integrated approach encompassing pressure relief before coal seam extraction, water injection during mining, and grouting post-mining. This method effectively prevents and controls the compound disasters of rock burst and coal spontaneous combustion, presenting innovative technical solutions for the safe extraction of coal resources.

Research Progress onLeak Prevention and Plugging Technology in Deepwater Drilling

Abstract With the continuous development of global oil and gas resources, onshore and shallow water crude oil production is no longer sufficient to meet the demand. Therefore, deepwater oil and gas exploration and development have attracted high attention from various countries. China’s oceans are vast and rich in offshore oil resources, especially in the South China Sea, where oil and natural gas reserves are enormous. In recent years, it has become a key focus of national offshore oil exploration and development. The increasing complexity of deep-sea well leakage in the ocean and the increasing difficulty of management have brought great challenges to drilling construction and also caused significant economic losses. Therefore, the research on leak prevention and plugging technology for deep water in the ocean has become particularly important. This article investigates the current research status of deep water leakage prevention and plugging technology both domestically and internationally, discusses the main problems that exist in the development and drilling process of deep water oil and gas fields, analyzes the reasons for well leakage, and proposes corresponding solutions.

Discussion on the Technology of Leak Prevention and Sealing in Drilling Engineering

Abstract Lost circulation is one of the most serious and complex situations that affect the safety of drilling operations. The occurrence of lost circulation not only causes losses to drilling engineering, but also poses great difficulties for the exploration and development of oil and gas resources. Only by solving the problem of well leakage can drilling operations be carried out effectively and economically. Lost circulation can have a significant impact on exploration and development work. However, everything has two aspects. In the case of the same reservoir and leakage, once a well leakage is found, it indicates the appearance of an oil and gas reservoir, which is more common in fractured reservoirs. Therefore, in the expected drilling of reservoir sections, it is necessary to analyze and judge leaks well to avoid human error. Leakage can occur in shallow, medium, and deep layers, as well as in different geological epochs, such as from the Quaternary to the Paleozoic, and can occur in various rock formations. From the perspective of drilling, with long open holes, multiple pressure layers, and complex formations, especially when drilling adjustment wells, the problem of well leakage appears to be common and more serious, and the occurrence of well leakage will cause significant economic losses. So, we should prioritize prevention and try to avoid the occurrence of well leakage. If drilling is carried out in formations with well leakage, but appropriate drilling techniques and measures are taken, it is possible that well leakage will not occur, and at least the degree of leakage can be greatly reduced. In case of a well leakage, effective measures should be taken in a timely manner to block it and ensure the smooth progress of drilling. Therefore, the significance of researching leak prevention and plugging technology is significant.