Precise Control Of Composition Research Articles

Dye-sensitized solar cells achieved with multi-layered SnO2/ZnO composite photoanodes through precise control of thickness and composition

AbstractThe spin coating is cost-effective, straightforward, and highly suitable for the large-scale production of solar cells. In this study, we report the fabrication of SnO2/ZnO composite films for dye-sensitized solar cells (DSCs) using a simplified and cost-effective spin-coating technique on fluorine-doped tin oxide glass substrates. This study introduces a new way of preparing a multi-layered composite thin film using a suspension containing colloidal SnO2 nanoparticles and ZnO nanoparticles followed by sonication and aging of TiO2-free high-efficiency DSCs. Our approach provides a facile way of obtaining a uniform film of tunable thickness with high reproducibility by adjusting the total number of coating cycles. The spin-coating process achieved a nano-sized SnO2-covered ZnO layer, contributing to enhanced conversion efficiency in DSCs. A specific number of seven coating cycles was identified as optimal for achieving the aspirational performance. Under standard AM 1.5 irradiation with an intensity of 100 mW/ cm2, the fabricated SnO2/ZnO composite films revealed an overall energy conversion efficiency of 6.5% with a thickness of 2.06 µm which is impressive for a TiO2-free DSC. This achievement indicates the potential of the developed fabrication process for cost-effective and scalable production of efficient DSCs with SnO2/ZnO composite.

Fabrication of Zinc Oxide Thin Films by Sol-Gel Dip Coating Process

Zinc oxide (ZnO) is a non-toxic material known for its distinctive physical and chemical properties, including a direct band gap energy of 3.37 eV and a large exciton binding energy of 60 meV, which contribute to its significant thermal and chemical stability at room temperature. Due to these characteristics, ZnO plays a critical role in various applications, such as UV light emitters, transparent conducting thin films in electronic devices, gas sensors, piezoelectric materials, transducers, and as a transparent conductive oxide (TCO) layer in thin-film photoelectrochemical cells. Numerous fabrication techniques have been employed to produce ZnO thin films. However, many of these methods require costly equipment, high vacuum environments, and elevated temperatures. In contrast, the sol-gel process stands out as a convenient, cost-effective, and versatile method for ZnO thin film fabrication. It offers advantages such as simplicity, low crystallization temperature, ease of reproducibility, molecular-level homogeneity, and precise compositional control. In this study, ZnO thin films were deposited onto Indium Tin Oxide (ITO) glass substrates using the sol-gel dip coating method, with varying preparative parameters: sol concentrations and annealing temperatures. The resulting samples were characterized using a UV-visible spectrophotometer, X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and energy dispersive X-ray spectroscopy (EDX). The results demonstrated that the unique properties of ZnO thin films are highly dependent on the preparative parameters. Specifically, the band gap energy decreased from 3.25 eV to 3.18 eV with increasing sol concentration and also showed a similar decline with higher annealing temperatures. XRD patterns revealed a smaller full width at half maximum (FWHM) of the most intense peak (002) at higher sol concentrations and annealing temperatures, indicating an increase in crystallite size. FESEM images highlighted distinct morphological changes corresponding to the variations in sol precursor concentration and annealing temperature, while EDX analysis confirmed the formation of highly pure ZnO thin films on ITO glass substrates.

Formula Design of Hyperbranched Polyarylether‐Based Low Dielectric Photosensitive Resin and Study of UV‐Cured Films Properties

ABSTRACTFor large‐area electronic and high shape complexity structure applications, various solution‐processable materials are chosen as dielectric layer due to their simple molding process via spin‐coating, casting, or 3D printing at room temperature. Herein, the acrylic‐ended fluorinated hyperbranched polyaryletherketone (hb‐P6FAEK‐Ace) was used as the prepolymer and then, the composition of photosensitive resin formula was regulated by adjusting the addition ratio of hb‐P6FAEK‐Ace and diluents (acrylimorpholine [ACMO] 1,6‐Hexanediol diacrylate [HDDA]). These photosensitive resin solutions showed the relative low viscosities ranged ranging from 18 to 253 mPa S at 100°C which was in favor of the future 3D printing method and printing accuracy. Then, the obtained UV‐cured films show the maximum tensile strength up to 71.9 MPa and superior thermal properties with the Tg of 157°C–177°C and T5% of 314°C–351°C. Moreover, they also exhibited the good dielectric performance with dielectric constants of 2.43–2.20 and dielectric loss of 0.013–0.014 at 1 MHz–1 GHz. These abovementioned satisfactory performance could be ascribed to the aromatic skeleton of hb‐P6FAEK‐Ace, introduced polarizability‐CF3 groups and the inner cavities for the hyperbranched structures, also the precise control of formula composition. Additionally, the curing degree, shrinkage of solid, and moisture properties were also researched thoroughly. This work provides a simple formula design though to construct the high performance and low dielectric photosensitive resin for the requirements of microelectronic applications.

Realizing Ultrahigh Conversion Efficiency of ≈9.0% in YbCd2Sb2/Mg3Sb2 Zintl Module for Thermoelectric Power Generation.

Recently, YbCd2Sb2-based Zintl compounds have been widely investigated owing to their extraordinary thermoelectric (TE) performance. However, its p orbitals of anions that determined the valence band structure are split due to crystal field splitting that provides a good platform for band manipulation by doping/alloying and, more importantly, the YbCd2Sb2-based device has yet to be reported. In this work, single-phase YbCd1.5Zn0.5Sb2 is successfully obtained through precise chemical composition control. Then, YbMg2Sb2-alloying increases the cationic vacancy defect formation energy and further optimizes carrier concentration. Moreover, the band structure of YbCd1.5Zn0.5Sb2 is subtly manipulated, and the underlying mechanism is experimentally explored. Combined with the reduced lattice thermal conductivity, a high peak ZT value of ∼1.43 at 700K is obtained for YbCd1.425Zn0.475Mg0.1Sb2. Subsequently, choosing Fe90Sb10 as the diffusion barrier layer and adopting the transient liquid phase bonding technique, for the first time, it is demonstrated that YbCd2Sb2/Mg3(Sb, Bi)2 TE module with an ultrahigh conversion efficiency of ≈9.0% at a heat difference of 430K. More importantly, this module displays good thermal stability. This work paves the way for YbCd2Sb2 materials and devices in mid-temperature heat recovery.

Chalcogen and halogen surface termination coverage in MXenes—structure, stability, and properties

MXenes are a diverse family of two-dimensional (2D) transition metal carbides, nitrides, and carbonitrides. They can be synthesized through both top-down approaches, such as selective etching of A-layers from MAX phases using acids or molten salts, and bottom-up approaches, such as direct synthesis using chemical vapor deposition. However, the degree of the surface termination coverage depends on the synthesis route and is one key parameter for controlling its properties. This study focuses on halogen- and chalcogen-terminated MXenes, particularly M2CTx where M = Ti, Zr, V, Nb, Ta, and T = S, Se, Te, Cl, Br, I, and with surface termination coverage ranging from 100% (ideal, x = 2) to 50% (x = 1). The incorporation of oxygen on vacant termination sites was also evaluated. Using density functional theory (DFT) calculations, we investigated the structural, electronic, and mechanical properties of these MXenes. Our findings reveal that non-ideal termination coverage (x < 2) is more favorable for MXenes terminated with a larger size of T, such as Ti2CBrx, Nb2CClx, and Ta2CClx, and leads to mixed termination sites and lower binding energies. A reduced binding energy may facilitate delamination into single sheets, however, too low termination coverage may also cause structural collapse. Electronic properties showed an increased number of states at the Fermi level under non-ideal coverage, potentially enhancing the conductivity. Mechanically, we find the moduli of MXenes to be comparable to other 2D materials, such as transition metal chalcogenides and hexagonal boron nitride, indicating their suitability for applications requiring flexibility and durability. This study underscores the potential of tailoring MXene properties through precise control of termination coverage and composition, paving the way for enhanced application-specific performance.

An innovative approach to control the Hf/Ti ratio in monolayers grown via atomic partial layer deposition

The Hf/Ti ratio was precisely controlled at monolayer thickness using atomic partial layer deposition (APLD). HfxTi1−xO2 films with varying Hf concentrations were deposited by adjusting the pulse time of Hf precursors within a single atomic layer. Characterization using x-ray reflectivity, x-ray photoelectron spectroscopy, and spectroscopic ellipsometry confirmed the presence of Hf, Ti, and O in the films. Increasing the Hf content caused the binding energies of the O 1s peak to shift to higher values, indicating a chemical environment change from TiO2-like to HfO2-like. A higher Hf content also increased the relative atomic percentages of Hf, Ti, and O, altering the film properties. The mass density and optical properties were notably sensitive to changes in the Hf/Ti ratio at monolayer thickness. The potential of APLD to reduce dimensionality through precise control of both thickness and composition renders it especially appropriate for applications requiring highly specific material properties.

Impact of Al profile in high-Al content AlGaN/GaN HEMTs on the 2DEG properties

Ultra-thin high-Al content barrier layers can enable improved gate control and high-frequency operation of AlGaN/GaN high electron mobility transistors (HEMTs) but the precise composition control is very challenging. In this work, we investigate the compositional profiles of AlxGa1−xN/GaN HEMT structures with targeted Al content in the barrier layer, x = 0.50, 0.70, and 1, and thickness in the sub-10 nm range in correlation with the two-dimensional electron gas (2DEG) properties. The HEMT structures are grown by metal-organic chemical vapor deposition on SiC. The maximum Al content in the barrier layer, experimentally determined by scanning transmission electron microscopy combined with energy-dispersive x-ray spectroscopy, is found to be lower than that intended and the deviations from the designed structures increase progressively with increasing x. Compositionally sharp interface between GaN and Al0.46Ga0.54N and box-like Al profile is achieved for intended x∼0.50 while pronounced Al grading is found in the samples with intended x of 0.70 and 1, with a maximum Al content of 0.78 reached for the HEMT structure with intended AlN barrier layer. The impact of the experimentally determined Al profiles on the 2DEG properties, obtained by contactless and electrical Hall effect measurements and coupled with self-consistent solution of the Poisson–Schrödinger equation, is evaluated and discussed. It is shown that the observed deviations from the intended Al profiles have a negative effect on the 2DEG confinement and result in reduced mobility parameters, which have significant implications for the implementation of high-Al content AlGaN/GaN structures in high-frequency devices.

Review on the Polymeric and Chelate Gel Precursor for Li-Ion Battery Cathode Material Synthesis.

The rapid design of advanced materials depends on synthesis parameters and design. A wide range of materials can be synthesized using precursor reactions based on chelated gel and organic polymeric gel pathways. The desire to develop high-performance lithium-ion rechargeable batteries has motivated decades of research on the synthesis of battery active material particles with precise control of composition, phase-purity, and morphology. Among the most common methods reported in the literature to prepare precursors for lithium-ion battery active materials, sol-gel is characterized by simplicity, homogeneous mixing, and tuning of the particle shape. The chelate gel and organic polymeric gel precursor-based sol-gel method is efficient to promote desirable reaction conditions. Both precursor routes are commonly used to synthesize lithium-ion battery cathode active materials from raw materials such as inorganic salts in aqueous solutions or organic solvents. The purpose of this review is to discuss synthesis procedure and summarize the progress that has been made in producing crystalline particles of tunable and complex morphologies by sol-gel synthesis that can be used as active materials for lithium-ion batteries.

Coaxial Bioprinting of Enzymatically Crosslinkable Hyaluronic Acid-Tyramine Bioinks for Tissue Regeneration.

Three-dimensional (3D) bioprinting has emerged as an important technique for fabricating tissue constructs with precise structural and compositional control. However, developing suitable bioinks with biocompatible crosslinking mechanisms remains a significant challenge. This study investigates extrusion-based bioprinting (EBB) using uniaxial or coaxial nozzles with enzymatic crosslinking (EC) to produce 3D tissue constructs in vitro. Initially, low-molecular-weight dextran-tyramine and hyaluronic acid-tyramine (LMW Dex-TA/HA-TA) bioink prepolymers were evaluated. Enzymatically pre-crosslinking these prepolymers, achieved by the addition of horseradish peroxidase and hydrogen peroxide, produced viscous polymer solutions. However, this approach resulted in inconsistent bioprinting outcomes (uniaxial) due to inhomogeneous crosslinking, leading to irreproducible properties and suboptimal shear recovery behavior of the hydrogel inks. To address these challenges, we explored a one-step coaxial bioprinting system consisting of enzymatically crosslinkable high-molecular-weight hyaluronic acid-tyramine conjugates (HMW HA-TA) mixed with horseradish peroxidase (HRP) in the inner core and a mixture of Pluronic F127 and hydrogen peroxide in the outer shell. This configuration resulted in nearly instantaneous gelation by diffusion of the hydrogen peroxide into the core. Stable hydrogel fibers with desirable properties, including appropriate swelling ratios and controlled degradation rates, were obtained. The optimized bioink and printing parameters included 1.3% w/v HMW HA-TA and 5.5 U/mL HRP (bioink, inner core), and 27.5% w/v Pluronic F127 and 0.1% H2O2 (sacrificial ink, outer shell). Additionally, optimal pressures for the inner core and outer shell were 45 and 80 kPa, combined with a printing speed of 300 mm/min and a bed temperature of 30 °C. The extruded HMW HA-TA core filaments, containing bovine primary chondrocytes (BPCs) or 3T3 fibroblasts (3T3 Fs), exhibited good cell viabilities and were successfully cultured for up to seven days. This study serves as a proof-of-concept for the one-step generation of core filaments using a rapidly gelling bioink with an enzymatic crosslinking mechanism, and a coaxial bioprinter nozzle system. The results demonstrate significant potential for developing designed, printed, and organized 3D tissue fiber constructs.

Synthesis of nanoscale spinel aluminates powder and studies of their optical and structural properties

In this research, Manganese aluminate (MA), Nickel aluminate (NA), and Zinc aluminate (ZA) nanocrystallites were synthesized using the combustion method at a temperature of 1173 K. This technique was selected for its effectiveness in producing nanocrystalline materials with high purity and precise compositional control. The synthesized nanocrystallites underwent extensive characterization to understand their structural and optical properties. Techniques such as UV–visible spectrophotometry (UV–vis), Fourier-transform infrared spectroscopy (FT-IR), and x-ray diffraction (XRD) were utilized to examine the impact of different cations (Mn2+, Ni2+, Zn2+) on the optical bandgap, binding energy, and crystallographic parameters of the materials. The optical bandgap values (Eg), determined using Tauc’s formula, were 4.121 eV for manganese aluminate, 3.819 eV for nickel aluminate, and 3.771 eV for zinc aluminate. FT-IR spectroscopy identified fundamental absorption peaks within the range of 450 to 750 cm−1, confirming the formation of aluminate spinel structures. XRD analysis confirmed the presence of a cubic spinel-type structure in all three prepared samples. The results revealed that the average crystallite sizes ranged from 23.890 nm to 45.100 nm, cell volumes varied between 521.47 Å3 and 548.68 Å3, lattice constants spanned from 8.258 Å to 8.049 Å, and inter-planar spacing ranged from 2.4268 nm to 2.4532 nm. These variations were observed as the cation transitioned from nickel to manganese passing through zinc element. Additionally, Rietveld refinements were performed to further analyze and refine the crystal structures based on XRD data. This comprehensive study aimed to elucidate the relationship between the synthesis conditions and the resultant properties of the nanocrystallites, providing insights into their potential applications in fields such as optoelectronics and photocatalysis.

ALD with Enhanced Nucleation on Polymeric Separator for Improved Li-S Batteries

Lithium-sulfur (Li-S) batteries, known for their exceptional energy densities, are at the forefront of the next generation of energy storage systems. However, their practical application is hindered by the polysulfide shuttle effect, which significantly impairs discharge capacity and cycling stability. This research introduces a novel solution to these challenges through the use of atomic layer deposition (ALD) of Al₂O₃ on commercial polypropylene/polyethylene/polypropylene (PP/PE/PP) separators.ALD is a thin-film deposition technique that allows for precise control of layer thickness and composition at the atomic scale. ALD is characterized by its ability to produce extremely uniform and conformal layers, making it an ideal method for applications where surface chemistry plays a critical role, such as in battery separators. The technique is particularly advantageous in applications requiring high precision and control, like in our approach to enhancing Li-S batteries.In our study, the inert separator was treated with UV ozone to enhance the nucleation of ALD precursors, with the goal of reducing polysulfide shuttling. The use of ALD-modified separators in batteries demonstrated a marked increase in specific capacity, reaching approximately 1150 mAh/g, and reduced overpotential, indicative of improved kinetic efficiency. Further, we explored the structural and chemical modifications of the separator, employing X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Our findings indicate that ALD of Al₂O₃ on the separators significantly improved the adsorption of polysulfides, thereby mitigating the shuttle effect.In addition to improved polysulfide interaction, we also examined the impact on polysulfide adsorption on the formation of the solid-electrolyte interphase (SEI). Our results showed that modified batteries exhibited no polysulfide presence on the anode, suggesting a stable and effective SEI. This observation is significant, as it indicates that our approach enhances specific capacity and cycling stability by controlling the formation of a more effective SEI.Overall, our research demonstrates how strategic modifications at the separator level, particularly through the application of ALD and UV ozone, can significantly enhance the overall performance of Li-S batteries. By leveraging the unique advantages of ALD, especially through Al₂O₃ deposition, we provide a viable pathway to enhance the efficiency and stability of Li-S batteries.

Anisotropic Heterobimetallic Nanomaterials with Controlled Composition for Efficient Oxygen Reduction at Ultralow Loading

AbstractHydrogen fuel cells represent a leading technology in developing green energy targeting net‐zero emissions goals by mid‐century. However, the sluggish kinetics of the oxygen reduction reaction (ORR) have hitherto demanded substantial quantities of expensive platinum (Pt) group metals. Advances in catalyst design, including the controllable fabrication of highly branched morphologies to increase the surface area‐to‐volume ratio, intermixing Pt with more affordable transition metals, and controlling composition, offer solutions that can further enhance activity and reduce expense. In this context, Pt/M (M = Fe, Ni, Co) nanopods and nanodendrites with precise composition control using more affordable starting materials are designed and crafted. The method is highly efficient, taking only 30 min and avoiding the need for high‐pressure equipment, making it highly scalable. These catalysts show superior ORR performance at an electrode loading as low as 0.0022 mgPt cm−2. One, nanodendritic Pt/Ni, achieves a mass activity of at 0.9 V versus RHE, making it 87 times more efficient in terms of Pt‐content than a commercial 10 wt% Pt/C nanoparticle standard. These findings provide new opportunities for developing next‐generation, cost‐efficient Pt‐based catalysts, by potentially advancing hydrogen fuel cell technology through performance enhancement and addressing cost challenges through catalyst design.

Advances in the Application of Nanozymes in Joint Disease Therapy

Nanozymes are nanoscale materials with enzyme-mimicking catalytic properties. Nanozymes can mimic the mechanism of natural enzyme molecules. By means of advanced chemical synthesis technology, the size, shape, and surface characteristics of nanozymes can be accurately regulated, and their catalytic properties can be customized according to the specific need. Nanozymes can mimic the function of natural enzymes, including catalase (CAT), superoxide dismutase (SOD), and glutathione peroxidase (GPx), to scavenge reactive oxygen species (ROS). Reported findings have shown that nanozymes have the advantages of excellent stability, low cost, and adjustable catalytic activity, thereby showing great potential and broad prospects in the application of disease treatment. Herein, we reviewed the advances in the application of nanozymes in the treatment of joint diseases. The common clinical manifestations of joint diseases include joint pain, swelling, stiffness, and limited mobility. In severe cases, joint diseases may lead to joint destruction, deformity, and functional damage, entailing crippling socioeconomic burdens. ROS is a product of oxidative stress. Increased ROS in the joints can induce macrophage M1 type polarization, which in turn induces and aggravates arthritis. Therefore, the key to the treatment of joint diseases lies in ROS scavenging and increasing oxygen (O2) content. Nanozymes have demonstrated promising application potential in the treatment of joint diseases, including rheumatoid arthritis, osteoarthritis, and gouty arthritis. However, how to ensure their biosafety, reduce the toxicity, and increase enzyme activity remains the main challenge in current research. Precise control of the chemical composition, size, shape, and surface modification of nanomaterials is the main development direction for the future.

Hierarchical metal–organic framework nanoarchitectures for catalysis

Metal–organic frameworks (MOFs) have garnered significant attention in the field of catalysis due to their unique advantages such as diverse coordination geometry, variable metal nodes, and organic linkers, facilitating precise structural and compositional control for achieving programmable catalytic functionalities. Although their inherent microporous structure could provide excellent shape selectivity during catalysis, it typically impedes the mass transfer process, thereby reducing the use of internal active sites and overall catalytic efficiency. Additionally, employing single MOFs as catalysts presents challenges in achieving complex catalytic reactions that require multifunctional active sites. In recent years, considerable research efforts have focused on designing and constructing hierarchical nanostructured MOFs to alleviate substrate diffusion limitations by introducing secondary nanopores, shortening diffusion distances via the construction of low-dimensional nanoarchitectures, and constructing multifunctional catalysts by integrating distinct MOFs with suitable functions. This review provides a comprehensive overview of the design, synthesis methods, and formation mechanisms of MOF-based hierarchical nanostructures in recent years. Subsequently, it further highlights their applications in thermal catalysis, electrocatalysis, and photocatalysis, along with the relationship between their hierarchical nanostructures and catalytic performances. Finally, it provides an outlook on the challenges and potential development directions of hierarchically structured MOF nanocatalysts.

Bimetallic nanoparticles via microemulsions: The effects of concentration in surface composition

The precise control of surface composition is crucial for enhancing the efficiency of bimetallic nanocatalysts. The scarcity and contradictory nature of experimental results keep open the question of whether reactant concentration promotes the enrichment of the nanoparticle surface with the slower reduction metal. A computer simulation study is carried out to thoroughly investigate how the initial concentration of metals salts modifies the resulting surface for various metal pairs and under different microemulsion compositions. Across all cases, it was observed that less Au is located at the surface as concentration increases. The resulting surface compositions are explained based on the relative rates of the two metals, which consider not only the reduction rate of particular metal pair but also factors such as the concentration of reactants, the intermicellar exchange rate, and the contribution of ripening to growth. This study provides a comprehensive understanding of the mechanism of nanoparticle formation in microemulsions and enables the proposal of practical guidelines for obtaining bimetallic nanoparticles with customized surfaces.

Study on Mn Volatilization Behavior During Vacuum Melting of High-manganese Steel

As an alloying element in steel, manganese can considerably enhance the mechanical properties of structural steel. However, the Mn volatilisation loss in vacuum melting is severe because of the high saturated vapour pressure, resulting in an unstable Mn yield and Mn content fluctuation. Therefore, a systematic study of the volatilisation behaviour of Mn in vacuum melting is required to obtain a suitable Mn control process to achieve precise control of Mn composition, thereby providing a theoretical basis for industrial melting of high-Mn steel. In order to explore the Mn volatilization behavior, the volatilization thermodynamics and volatilisation rate of Mn, as well as the influence factors are discussed in this study. The results shows that Mn is extremely volatilised into the vapour phase under vacuum, the equilibrium partial pressure is closely related to Mn content and temperature. With an increase in the Mn content, a higher C content has a more obvious inhibitory effect on the equilibrium partial pressure of Mn. The maximum theoretical volatilisation rate of Mn shows a linear upward trend with an increase in Mn content. However, a higher C content has a more obvious effect on the reduction of the maximum theoretical volatilisation rate with the increase of Mn content. This study provides an improved understanding of Mn volatilisation behaviour as well as a theoretical foundation for consistent Mn yield control during the vacuum melting process of high-Mn steel.

One‐step Synthesis of UV‐Curable CsPbX3 (X = Cl, Br, and I) Nanocrystal Inks for Printing

AbstractMetal halide perovskite nanocrystals (NCs) have garnered significant attention due to their captivating optoelectronic properties. One promising application for these materials is their use as color‐conversion layers (CCLs) in blue micro‐LED technology, enabling the realization of full‐color displays. Nonetheless, a pivotal challenge revolves around producing efficient luminescent perovskite inks and subsequently employing them for inkjet printing finely patterned CCLs. In this study, a straightforward single‐step hot‐injection method is introduced for synthesizing inks comprising CsPbX3 NCs, where X represents Cl, Br, and I, or mixed halide systems such as Cl/Br and Br/I. Through precise composition control, the emission spectra can be effortlessly adjusted across the entire visible spectrum, spanning from 410 to 710 nm. The resulting CsPbX3 NCs exhibit narrow emission line‐widths, ranging from 21 to 39 nm, an expansive color gamut encompassing up to 130% of the National Television Standards Committee color standard, and exceptional quantum yields reaching up to 100%. With their superb optical performance, facile synthesis procedure, and robust stability, these CsPbX3 NCs emerge as highly suitable candidates for their use as CCLs with blue light‐emitting devices deployed as backlights.

Laser-thermal reduction synthesis of high-entropy alloys towards high-performance pH universal hydrogen evolution reaction

Owing to their multi-elemental compositions and unique high-entropy mixing states, high-entropy alloy (HEA) nanoparticles (NPs) displaying tunable activities and enhanced stabilities thus have become a rapidly growing area of research in recent years. However, the integration of multiple elements into HEA NPs at the nanoscale remains a formidable challenge, especially when it comes to the precise control of particle size, elemental composition and content. Herein, a simple and universal high-energy laser assisted reduction approach is presented, which achieves the preparation of HEA NPs with a wide range of multi-component, controllable particle sizes and constitution on different substrates within seconds. Laser on carbon nanofibers induced momentary high-temperature annealing (>2000 ​K and ramping/cooling rates > 105 ​K ​s−1) to successfully decorate HEA NPs up to twenty elements with excellent compatibility for large-scale synthesis (20.0 ​× ​20.0 ​cm2 of carbon cloth). The IrPdPtRhRu exhibit robust electrocatalytic hydrogen evolution reaction (HER) activities and low overpotentials of 16, 28, and 12 ​mV at a current density of 10 ​mA ​cm−2 in alkaline (1.0 ​M KOH), alkaline simulated seawater (1.0 ​M KOH ​+ ​0.5 ​M NaCl), and acidic (0.5 ​M ​H2SO4) electrolytes, respectively, and excellent stability (7 days and >2000 cycles) at the alkaline HER.

Impact of Residual Compositional Inhomogeneities on the MCT Material Properties for IR Detectors.

HgCdTe is a well-known material for state-of-the-art infrared photodetectors. The interd-iffused multilayer process (IMP) is used for Metal-Organic Chemical Vapor Deposition (MOCVD) of HgCdTe heterostructures, enabling precise control of composition. In this method, alternating HgTe and CdTe layers are deposited, and they homogenize during growth due to interdiffusion, resulting in a near-uniform material. However, the relatively low (350 °C) IMP MOCVD growth temperature may result in significant residual compositional inhomogeneities. In this work, we have investigated the residual inhomogeneities in the IMP-grown HgCdTe layers and their influence on material properties. Significant IMP growth-related oscillations of composition have been revealed in as-grown epilayers with the use of a high-resolution Secondary Ion Mass Spectroscopy (SIMS). The oscillations can be minimized with post-growth annealing of the layers at a temperature exceeding that of growth. The electric and photoelectric characterizations showed a significant reduction in the background doping and an increase in the recombination time, which resulted in dramatic improvement of the spectral responsivity of photoconductors.

Numerical Simulation of the Evaporation Behavior of Fe-Mn Heterogeneous Powder in Selective Laser Melting Process.

Multi-material additive manufacturing using heterogeneous powders as raw materials is one of the important development directions of metal additive manufacturing technology. The evaporation behavior of heterogeneous powders in the selective laser melting (SLM) process has a significant influence on the accuracy of chemical composition control and the quality of the final product. In this paper, the fusion process of Fe20Mn (80 wt.% Fe and 20 wt.% Mn) heterogeneous powder, Fe and Mn elemental powders, and Fe20Mn pre-alloyed powder is numerically simulated using FLOW-3D® software and partially validated through SLM experimental results. The morphology and the characteristics of the flow field and temperature field in the melt pool for four kinds of powder materials are analyzed. The influence of the elemental evaporation behavior of different powders on the mass loss of the Mn element is discussed. The results show that the excessive accumulation of heat increases the maximum temperature of the melt pool, thus increasing mass loss. The Fe20Mn heterogeneous powder has a wider heat-affected zone and a higher peak value of temperature, nearly 400 K higher than that of the Fe20Mn pre-alloyed powders, which exhibits an intensive evaporation behavior. The mass loss of the Mn element obtained from the SLM experiment for Fe20Mn heterogeneous powders forming parts is more than the Fe20Mn pre-alloyed powders' forming parts for different laser powers, up to 17 wt.% at P = 120 W. This tendency is consistent with the numerical analysis of the effect of evaporation behavior of Fe-Mn heterogeneous powder during the SLM process. This study provides the necessary theoretical reference and process guidance for realizing the precise control of the SLM composition of a heterogeneous powder in multi-material additive manufacturing caused by evaporation behavior.