Postoperative Periprosthetic Fractures Research Articles

Post-operative periprosthetic femoral fractures in England: Patient profiles and short-term outcomes

Background and objectivePost-operative periprosthetic femoral fractures (POPFF) present a growing challenge for healthcare services, but there are limited national data on patient profiles, short-term outcomes, and post-discharge follow-up. We aimed to fill these gaps. MethodsUsing Hospital Episode Statistics (HES), we identified POPFF discharges from hospitals in England for patients aged 18 and above between April 2016 and December 2022. We flagged prior admissions for hip fracture and elective hip or knee replacement surgery (primary, revision or re-revision) between April 2000 and the day of the POPFF admission date. We extracted information on patient factors, treatment modes for POPFF (nonoperative, fixation, revision), and outcomes (in-hospital mortality, length of stay, unplanned readmission). We used outpatient data to summarise post-hospitalisation follow-up. ResultsOf 39,035 cases, 65.9 % were female; the median age was 82 years. HES data identified that 34.0 % had previously undergone elective hip replacement, 26.2 % elective knee replacement, and 22.8 % surgery for hip fracture. Those with a prior hip fracture were more likely to have delirium during the index POPFF admission, and, compared with those with a prior elective hip or knee replacement, they faced higher in-hospital mortality (5.1 % vs 3.2 % and 3.6 %, respectively), rates of readmission (15.4 % vs 13.1 % and 12.8 %, respectively), and hip re-fracture after POPFF (2.9 % vs 1.2 % and 1.6 %, respectively). Their median length of stay was longer (16 vs 14 days, p < 0.001). The most common reason for hospital readmission following POPFF was another fracture (11.3 % of all readmissions). Overall, 74 % of patients were discharged from outpatient follow-up within 12 months. ConclusionThis is the first national description of the burden of adverse outcomes for people with POPFF in England, of whom a large proportion require ongoing specialist support. Fewer POPFF cases follow prior hip fracture surgery than elective joint replacement, but these patients face higher risks of worse outcomes. With an expected increasing incidence of POPFF, this may have considerable health service implications.

Epidemiology, Classification and Treatment of Femur and Tibia Fractures around Total Knee Arthroplasty (Literature Review)

Summary. Periprosthetic fractures around total knee arthroplasty (TKA) are difficult to treat due to complex fracture morphology, high proportions of injuries associated with osteopenia, and the variability of injury patterns. Periprosthetic fractures associated with TKA are defined as fractures around the knee joint (femur, tibia, or patella) occurring within 5 cm of the intramedullary stem of the prosthesis or 15 cm of the joint. The incidence is estimated to be between 0.3% and 2.5% after primary TKA and up to 28% after revision TKA. There are several surgical and nonsurgical risk factors associated with postoperative periprosthetic fractures. Distal femoral periprosthetic fractures following TKA are the most common and reported to occur in 0.2–1.8% of patients after primary TKA. Tibial periprosthetic fractures have a reported prevalence of 0.07–0.1% in primary and 0.36% in revision knee arthroplasties. Patella fractures are the second most common periprosthetic fractures following TKA, with prevalence ranging from 0.68% to 1.19%, and are usually associated with a resurfaced patella. Several classification systems of periprosthetic fractures around TKA have been published and some treatment recommendations have been provided. However, most systems are subject to criticism and use different classification systems for the tibia, patella, and the femur.A variety of treatment methods are available for periprosthetic fractures. Conservative treatment can include protected weight bearing, splinting, or traction. Surgical treatment commonly involves closed intramedullary nailing or open reduction and internal fixation by plates. In cases of significant bone loss, a revision TKA may be indicated. In general, treatment must be guided based on the stability of the implant and the remaining bone quality, as determined by the presence of osteolysis and the location of the fracture.

The incidence of postoperative periprosthetic femoral fracture following total hip replacement: An analysis of UK National Joint Registry and Hospital Episodes statistics data.

Postoperative periprosthetic femoral fracture (POPFF) after total hip replacement (THR) requires complex surgery and is associated with a high morbidity, mortality, and cost. Although the United Kingdom based National Joint Registry (NJR) captures over 95% of THRs treated with revision, before June 2023 it did not capture POPFF treated with fixation. We aimed to estimate the incidence and epidemiology of POPFF treated with either surgery in England. We performed a retrospective analysis of a mandatory, prospective database (NJR) linked to Hospital Episode Statistics (HES). All linkable primary THRs between 01/01/2004 and 31/12/2020 were included. Revision or fixation of POPFF were identified using a combination of procedural and diagnosis codes. We identified 809,832 THRs representing 5,542,332 prosthesis years at risk. A total of 5,100 POPFF were identified that had been surgically treated by revision, fixation, or both, and 2,831 of these fractures were treated with fixation alone, meaning 56% were not represented with revision data alone. The incidence of POPFF needing surgery was 0.92 (95% CI 0.90, 0.95) per 1,000 prostheses years. This incidence was higher in patients over the age of 70 at the time of primary THR (1.31 [95% CI 1.26, 1.35] per 1,000 prostheses years) and for patients who underwent THR for hip fracture (2.19 [95% CI 1.97, 2.42] per 1,000 prostheses years). This incidence appears to be increasing year on year. The cumulative probability of sustaining a POPFF within 10 years of THR was 1% and over 15% of patients died within 1 year of surgery for a POPFF. To date, the incidence of POPFF may have been underestimated with over 50% of cases missed if the case identification in this study is correct. After including these cases, we observed that POPFF is the largest reason for major reoperation following THR and patients sustaining these injuries have a high risk of death. The prevention and treatment of POPFF and requires further resource allocation and research.

Complications after reverse total shoulder arthroplasty in the Korean population: a single center study of 299 cases

BackgroundKnowledge regarding differences in the order of frequency of complications after reverse total shoulder arthroplasty (RTSA) between Asian and Western populations is limited. We therefore asked for (1) What is the order of frequency of complications after primary RTSA in the Korean population? (2) What are the rates of complication, reoperation, and revision, and clinical outcomes after index surgery? MethodsWe retrospectively reviewed the 299 consecutive cases who underwent primary RTSA with more than 1 year of follow-up over a period of 12 years. The mean age of the patients was 73.4 years (range, 58-88 years) and the mean follow-up period was 3.8 years (range, 1-11.5 years). Evaluation of the clinical outcomes, complications, and reinterventions was performed at the final follow-up. ResultsThe mean VAS pain score, UCLA score, ASES score, and SSV improved from 6.7, 10.2, 30.7, and 27.7% before RTSA to 1.4, 26.4, 80.5, 77.2% after RTSA, respectively (P < .001). Overall, 45 complications (15.1%) were observed in 44 patients. The order of frequency of complications was as follows: 16 cases of scapular stress fracture (5.4%), 9 intraoperative or postoperative periprosthetic fracture (3.0%), 6 brachial plexus injury (2.0%), 4 instability (1.3%), 2 glenoid loosening (0.7%), 2 glenoid disassembly (0.7%), 2 periprosthetic joint infection (0.7%), 1 glenoid fixation failure (0.3%), 1 humeral stem fixation failure (0.3%), 1 hematoma (0.3%), and 1 complex regional pain syndrome (0.3%). Reintervention was performed in 15 cases (5.0%) including reoperation (8 cases; 2.7%) and revision surgery (7 cases; 2.3%). ConclusionAt a mean follow-up period of 3.8 years, primary RTSA showed satisfactory clinical outcomes with a complication rate of 15.1%, a reoperation rate of 2.7%, and a revision rate of 2.3%. Scapular stress fracture appears to be the most common complication after RTSA in the Korean population.

Clinical outcomes of primary total knee arthroplasty in non-syphilitic neuroarthropathy of the knee.

Total knee arthroplasty (TKA) in syphilitic neuroarthropathy using earlier implant designs was associated with poorer outcomes. Literature on TKA for non-syphilitic neuroarthropathy using modern contemporary prosthesis is scarce. We aim to analyse the clinical and radiological outcomes of TKA in neuropathic joints. A final cohort of 17 patients (21 knees) with the diagnosis of neuropathic joint undergoing primary TKA between January 2013 to January 2019 were included in the study. The preoperative ambulatory status, range of motion, type of prosthesis, level of constraint and any augmentation used were retrieved from medical records. Radiological evaluation includes Koshino's staging, the magnitude of deformity defined by the Hip-Knee-Ankle (HKA) angle, and any progressive loosening. Pre and postoperative functional scores were obtained by the Knee Society (KSS) and Knee Society Functional Score (KSS-F). Any complications or reoperation were noted till the final follow-up. Preoperative and follow-up functional scores, HKA and range of motion were compared using the paired Samples test. The mean follow-up was 40.2 months (range, 15 to 75 months). Preoperatively, according to the Koshino staging, five knees were in stage 3 (23.8%). The mean HKA angle in valgus knees was 23.60 (range, 11.10 to 42.50) and for the varus knees was 19.30 (range, 4.90 to 39.60). The prosthesis used were posterior stabilized in 7 knees (33.3%), varus-valgus constrained in five knees (23.8%) and a rotating hinge was required in nine knees (42.8%). Metaphyseal sleeves were used along with hinge prosthesis in six knees (28.6%). The mean arc of motion improved from 102.4 ± 22.7 degrees to 105.7 ± 15.5 degrees postoperatively (p = 0.27). The knee society and knee society functional scores improved from 23.3 ± 9.3 and 28.3 ± 12.2 preoperatively to 81.1 ± 5.4 and 80.4 ± 8.5 during the follow up respectively (p < 0.001). There were no progressive radiolucent lines in any knees at the final follow-up. One patient had intraoperative bony medial collateral ligament injury, one patient had deep vein thrombosis after five days from the index surgery and another had postoperative periprosthetic tibial shaft fracture. According to our study, the clinical outcomes of TKA for neuroarthropathy show significant improvement with the diagnosis of non-syphilitic neuroarthropathy, utilization of modern constrained prostheses, and early rehabilitation, at medium-term follow-up. Tibial and femoral stems are preferred for equal stress distribution and to prevent early loosening.

Effect of cemented vs uncemented on outcomes for hemiarthroplasty in the elderly: A meta-analysis of randomized clinical trials.

In patients undergoing hemiarthroplasty in the elderly, the choice of the cemented method remains controversial. This meta-analysis was undertaken to compare the impact of cemented vs uncemented on outcomes for hemiarthroplasty in the elderly. This study included randomized controlled trials comparing the postoperative effects of cemented vs uncemented in patients with hemiarthroplasty. With no language restrictions, we searched Medline (Ovid), Embase (Ovid), Cochrane Central Register of Controlled Trials (Cochrane Collaboration), Clinical Trials.gov, the ISRCTN registry, as well as gray literature with no language restrictions from January 1966 to April 2023. Data were quantitatively summarized using a random-effects model. The primary outcome was 1-year mortality. This study included 13 randomized controlled trials with 3485 patients. The primary outcomes of the meta-analysis showed that cemented fixation in elderly patients undergoing hemiarthroplasty was superior to noncemented in 1-year mortality (risk ratio [RR] = 0.87, 95% confidence interval [CI]: 0.77, 0.97). Moreover, cemented was associated with a reduced risk of intraoperative periprosthetic fracture (RR = 0.19, 95% CI: 0.07, 0.50), postoperative periprosthetic fracture (RR = 0.34, 95% CI: 0.16,0.72), and loosening (RR = 0.33, 95% CI: 0.11, 0.97). Cemented hemiarthroplasty is superior to noncemented in terms of survival. Moreover, cementation reduces the incidence of some implant-related complications. More extensive trials are needed to provide adequate guidance for choosing the proper cemented method.

A study of postoperative periprosthetic femur fracture in cases of operated total knee replacement-incidence and treatment outcome

A study of postoperative periprosthetic femur fracture in cases of operated total knee replacement-incidence and treatment outcome

Challenges and Outcomes in the Management of Periprosthetic Humeral Fractures: A Retrospective Study and Review of Current Approaches.

Periprosthetic humeral fractures are a rare and increasing entity due to the rising number of shoulder arthroplasties. These fractures pose a significant challenge for surgeons, with incidence rates ranging from 1.2% to 19.4%. They can occur intraoperatively or as late complications, often influenced by trauma, prosthetic wear, or loosening. A retrospective study was conducted on all patients admitted with periprosthetic humeral fractures over a four-year period (2018-2022). Inclusion criteria were postoperative periprosthetic humeral fractures with a minimum follow-up of six months. Exclusion criteria included intraoperative fractures, fractures of the glenoid or coracoid process, and cases with follow-up of less than six months or incomplete data. The study included six patients with an average age of 83.1 years, predominantly female (four females andtwo males). All fractures occurred postoperatively: four on reverse shoulder prostheses, one on an anatomical prosthesis, and one on a hemiarthroplasty. The mechanism was low-energy trauma, with fractures occurring an average of 96 months post-initial surgery. Fractures were classified using the Campbell system: three in region 4, two in region 3, and one in region 2. Radiographs showed four cemented and two uncemented stems. Three patients underwent surgical treatment with either prosthetic replacement using a long stem and fracture cerclage or lockingcompression plate (LCP). The remaining three patients were treated conservatively with a Sarmiento brace due to advanced age, bone fragility, low functional demand, and comorbidities. Radial nerve palsy was a complication in two patients post-trauma, with one recovering fully and the other not recovering before death due to associated complications. All fractures consolidated within an average of seven months (range: 5-8 months).Functional recovery was satisfactory with a median Constant-Murley Shoulder Score of 69in surgically treated patients, with range of motion between 100 and 140 degrees. Only two conservatively treated patients achieved fracture consolidation, and functional recovery was inadequate. Managing periprosthetic humeral fractures remains challenging. Treatment goals include fracture healing, maintaining prosthetic stem stability, preserving glenohumeral motion, and restoring shoulder function. Despite various classification systems, the literature shows limited and variable data on incidence and treatment outcomes. Conservative treatment may be considered for stable implants and acceptable alignment, but surgical intervention is often necessary for displaced fractures or implant loosening. The management of periprosthetic humeral fractures requires a tailored, multidisciplinary approach to optimize outcomes and improve patient quality of life. With the increasing incidence of these fractures due to the growing use of shoulder arthroplasty, ongoing research and development of new techniques and therapeutic strategies are essential to address this clinical challenge effectively.

Treatment of femoral neck fractures using actis stem: complication rate in 188 uncemented hemiarthroplasties

IntroductionCemented hemiarthroplasty (HA) is preferred in treating dislocated femoral neck fractures in elderly, osteoporotic patients, since uncemented HA was associated with mechanical complications more frequently. Cementation can conversely cause cardiopulmonary complications, leading to demand on safe, uncemented implants addressing osteoporosis. This study is set up as a retrospective feasibility study on the use of an uncemented, collared wedge implant (Actis®, DePuy Synthes, Warsaw, IN), for HA in elderly patients, focusing on complication rate.Materials and methodsFrom 1,194 patients, treated with HA in two study centers between 2017–2022, 188 received Actis® uncemented stem with bipolar head. Complete follow-up were retrospectively collected in all patients.ResultsIn 188 patients (f: 64.9%; age: 83.1 ± 7.7a) included, no case of intra-operative mortality was recorded. 2 day mortality was 1.1%, 30 day mortality was 7.4% and 1 year mortality was 28.2%. 2 (1.1%) intra-operative fractures did not receive surgical revision, 3 (1.6%) post-operative periprosthetic fractures caused separate admission and revision. 2 cases (1.1%) of early infection required surgical revision.ConclusionOur data provide proof of concept, that Actis® Stem allows an alternative, uncemented treatment option for displaced femoral neck fractures with HA. In case of preoperative or intraoperative medial cortical bone defects, stability of this implant is deteriorated.

ESTIMATING THE RISK OF POSTOPERATIVE PERIPROSTHETIC FEMORAL FRACTURES AFTER TOTAL HIP ARTHROPLASTY ASSOCIATED WITH COMMONLY USED IMPLANTS: AN ANALYSIS OF NATIONAL HEALTH DATA FROM ENGLAND

Current estimates of periprosthetic fracture risk associated with femoral implants is mostly limited to revision only estimates and does not accurately represent stem performance. The aim of this study was to estimate the risk of surgically treated post-operative periprosthetic femoral fracture (POPFF) more accurately associated with frequently used femoral implants used for total hip arthroplasty (THA).A cohort study of patients who underwent primary THA in England between January 1, 2004, and December 31, 2020. Periprosthetic fractures were identified from prospectively collected revision records and national procedure coding records. Survival modelling was used to estimate POPFF incidence rates, adjusting for potential confounders. Subgroup analyses were performed for patients over 70 years, with non-osteoarthritic indications, and neck of femur fracture.POPFF occurred in 0.6% (5100/809,832) of cases during a median (IQR) follow up of 6.5 (3.9 to 9.6) years. The majority of POPFF were treated with fixation after implantation of a cemented stem. Adjusted patient time incidence rates (PTIR) for POPFF varied by stem design, regardless of cement fixation. Cemented composite beam stems (CB stems) demonstrated the lowest risk of POPFF. Collared cementless stems had an equivalent or lower rate of POPFF versus the current gold standard polished taper slip cemented stem.POPFF account for a quarter of all revisions following primary THA. Cemented CB stems are associated with the lowest POPFF risk. Stem design is strongly associated with POPFF risk, regardless of the presence of cement. Surgeons, policymakers, and patients should consider these findings when recommending femoral implants in those most at risk of POPFF.

DOES AN INTRAOPERATIVE FEMORAL FRACTURE IMPACT ONE-YEAR PATIENT-REPORTED OUTCOME MEASURES WHEN USING A CEMENTLESS CORAIL STEM?

The significance of periprosthetic fractures about a total hip arthroplasty (THA) is becoming increasingly important. Recent studies have demonstrated post-operative periprosthetic fracture rates are higher amongst cemented polished taper slip (PTS) stem designs compared to collared cementless (CC) designs.However, in the National Joint Registry, the rate of intra-operative periprosthetic femoral fractures (IOPFF) with cementless implant systems remains higher (0.87% vs 0.42%. p &lt;0.001) potentially leading to more post-operative complications.This study identifies the incidence of IOPFF, the fracture subtype and compares functional outcomes and revision rates of CC femoral implants with an IOPFF to CC stems and PTS stems without a fracture.5376 consecutive CC stem THA, carried out through a posterior approach were reviewed for IOPFF. Each fracture was subdivided into calcar fracture, greater trochanter (GT) fracture or shaft fracture.1:1:1 matched analysis was carried out to compare Oxford scores at one year. Matching criteria included; sex (exact), age (± 1 year), American Society of Anaesthesiologists (ASA) grade (exact), and date of surgery (± 6 months).Electronic records were used to review revision rates.Following review of the CC stems, 44 (0.8%) were identified as having an IOPFF. Of these 30 (0.6%) were calcar fractures, 11 (0.2%) GT fractures and 3 (0.06%) were shaft fractures. There were no shaft penetrations.Overall, no significant difference in Oxford scores at one year were observed when comparing the CC IOPFF, CC non-IOPFF and PTS groups.There were no CC stems revised for any reason with either a calcar fracture or trochanteric fracture within the period of 8 years follow-up.IOPFF do occur more frequently in cementless systems than cemented. The majority are calcar and GT fractures. These fractures, when identified and managed intra-operatively, do not have worse functional outcomes or revision rates compared to matched non-IOPFF cases.

Evaluation of an Initial Robotic-Assisted Direct Anterior Approach Cohort Receiving a New Short Metaphyseal Filling Collared Femoral Implant.

Shorter, metaphyseal-filling collared stems have become popular with the direct anterior approach (DAA), based on their ease of broaching and insertion through less invasive surgical exposures. To aid with the DAA, robotic-assisted technology provides three-dimensional computed tomography (CT) preoperative planning and intraoperative guidance to accurately assess stem version. With other femoral stems, this has been shown to provide more accurate implant planning and improved patient outcomes. The purpose of this study was to understand femoral stem placement predictability and patient outcomes for a newly designed metaphyseal-filling collared stem system through a DAA in combination with a robotic-assisted system during a single surgeon's initial cases. A single high-volume surgeon, experienced with robotic-assisted DAA total hip arthroplasty (THA), adopted the use of a metaphyseal-filling collared stem. Intraoperative data and patient outcomes up to six months postoperative were collected prospectively during the surgeon's first 123 cases. Student's t-tests (α=0.05) were used for statistical comparisons. Intraoperative and radiographic assessments were performed for all 123 cases. The estimated version with neck-cut view of the robotic-assisted system was 13.81 ± 3.81°. The final version measurement captured with the robotic-assisted system was 16.56 ± 6.61°. The difference between the estimated version and robotic-assisted measured version was, on average, 2.68 ± 5.7° (p<0.001). The femoral stem sat at the level of the calcar in all but five cases. There were no intraoperative or postoperative periprosthetic fractures. Patients reported significant improvements in reduced Hip dysfunction and Osteoarthritis Outcome Score for Joint Replacement (HOOS-JR), Patient-Reported Outcomes Measurement Information System (PROMIS 10), and Western Ontario and McMaster Universities Arthritis Index (WOMAC) scores throughout their six-month recovery process with no patients reporting a periprosthetic joint infection, fracture, or dislocation. The use of a metaphyseal-filling collared stem with robotic-assisted DAA resulted in adequate stem version when assessed visually and with CT scan assessments. Version estimation values were improved upon over visual assessments when using the robotic system that maps out the proximal femur and the improvement was also demonstrated when compared to the prior literature. This may also be related to the stem's collar providing a visual guide during stem placement posterior fill of this triple-tapered stem design. Although further follow up is needed to assess longer-term outcomes, at six months postoperatively, patients had significant improvements in patient-reported outcomes with all patients reporting minimal to no restrictions with their THA.

Three Differing Methods of Treating Intraoperative Nondisplaced Calcar Fractures Demonstrate Similar Radiographic Stem Subsidence

BackgroundSeveral management strategies have been described to treat intraoperative calcar fractures during total hip arthroplasty (THA), including retaining the primary implant and utilizing cerclage cables (CCs) or switching the implant to one that bypasses the fracture and achieves diaphyseal fixation. However, the radiographic and clinical outcomes of these differing strategies have never been described and compared. MethodsWe retrospectively identified 50 patients who sustained an intraoperative calcar fracture out of 9,129 primary total hip arthroplasties (0.55%) performed by one of three surgeons between 2008 and 2022. Each of the three surgeons consistently employed a distinct strategy for the management of these fractures: retention of the primary metaphyseal-engaging implant and placement of CCs; exchange to a modular, tapered-fluted stem (MTF); or exchange to a fully-coated, diaphyseal-engaging stem (FC). Stem subsidence was then evaluated on standing anteroposterior pelvis radiographs at three months and one year postoperatively. Postoperative medical and surgical complication rates were evaluated. ResultsA total of fifteen patients were treated with CC, 15 with MTF, and 20 with FC. At three-month follow-up, mean stem subsidence was 0.43 ± 0.08 mm, 1.47 ± 0.36 mm, and 0.68 ± 0.39 mm for CC, MTF, and FC cohorts, respectively (P = .323). At one-year, mean stem subsidence was 0.70 ± 0.08 mm, 1.74 ± 0.69 mm, and 1.88 ± 0.90 mm for the CC, MTF, and FC cohorts, respectively (P = .485). Medical complications included 2 venous thromboembolic events (4%) within 90 days of surgery. There were 6 reoperations (12%); 3 (6%) for acute periprosthetic joint infection (all within the FC cohort); 2 (4%) for postoperative periprosthetic fractures (one fracture distal to the stem in the FC cohort and one fracture at the level of the stem in the MTF cohort), and 1 (2%) closed reduction for instability (within the CC cohort). ConclusionsThe three described methods of managing intraoperative nondisplaced calcar fractures demonstrated little radiographic stem subsidence; however, the risk of reoperation was much higher than expected.

Reliable in vitro method for the evaluation of the primary stability and load transfer of transfemoral prostheses for osseointegrated implantation.

Osseointegrated transfemoral prostheses experience aseptic complications with an incidence between 3% and 30%. The main aseptic risks are implant loosening, adverse bone remodeling, and post-operative periprosthetic fractures. Implant loosening can either be due to a lack of initial (primary) stability of the implant, which hinders bone ingrowth and therefore prevents secondary stability, or, in the long-term, to the progressive resorption of the periprosthetic bone. Post-operative periprosthetic fractures are most often caused by stress concentrations. A method to simultaneously evaluate the primary stability and the load transfer is currently missing. Furthermore, the measurement errors are seldom reported in the literature. In this study a method to reliably quantify the bone implant interaction of osseointegrated transfemoral prostheses in terms of primary stability and load transfer was developed, and its precision was quantified. Micromotions between the prosthesis and the host bone and the strains on the cortical bone were measured on five human cadaveric femurs with a typical commercial osseointegrated implant. To detect the primary stability of the implant and the load transfer, cyclic loads were applied, simulating the peak load during gait. Digital Image Correlation was used to measure displacements and bone strains simultaneously throughout the test. Permanent migrations and inducible micromotions were measured (three translations and three rotations), while, on the same specimen, the full-field strain distribution on the bone surface was measured. The repeatability tests showed that the devised method had an intra-specimen variability smaller than 6μm for the translation, 0.02 degrees for the rotations, and smaller than 60 microstrain for the strain distribution. The inter-specimen variability was larger than the intra-specimen variability due to the natural differences between femurs. Altogether, the measurement uncertainties (intrinsic measurement errors, intra-specimen repeatability and inter-specimen variability) were smaller than critical levels of biomarkers for adverse remodelling and aseptic loosening, thus allowing to discriminate between stable and unstable implants, and to detect critical strain magnitudes in the host bone. In conclusion, this work showed that it is possible to measure the primary stability and the load transfer of an osseointegrated transfemoral prosthesis in a reliable way using a combination of mechanical testing and DIC.

Management of periprosthetic humerus fractures after shoulder arthroplasty.

The purpose of this retrospective study was to analyze time to fracture union, complications, and outcomes of postoperative periprosthetic humerus fractures after primary shoulder arthroplasty. Retrospective review of patients who sustained a postoperative periprosthetic humerus fracture after primary shoulder arthroplasty at a single institution. Fractures were classified according to the Worland Classification system. Both non-operatively and operatively treated patients were included. The primary study outcomes were time to union and complications. There were 46 patients who sustained a postoperative periprosthetic humerus fracture after primary shoulder arthroplasty, 18 were treated non-operatively and 28 were treated operatively. There were seven (25%) patients who underwent surgery after failed non-operative management. There was only one (2.2%) patient who had a nonunion at final follow-up. The average American Shoulder and Elbow Surgeons Shoulder Score, Single Assessment Numeral Evaluation, and visual analog scale pain scores were 73.5 ± 22.7, 66.5 ± 23.1, and 2.2 ± 2.4, respectively. There was a high rate of union for both non-operatively and operatively treated periprosthetic fractures. However, there was a high rate of cross-over from non-operative to operative treatment and a high complication rate for both cohorts. For properly indicated patients, non-operative and operative treatment can result in satisfactory patient outcomes.

Hip &amp; Pelvis

The February 2024 Hip &amp; Pelvis Roundup360 looks at: Trial of vancomycin and cefazolin as surgical prophylaxis in arthroplasty; Is preoperative posterior femoral neck tilt a risk factor for fixation failure? Cemented versus uncemented hemiarthroplasty for displaced intracapsular fractures of the hip; Periprosthetic fractures in larger hydroxyapatite-coated stems: are collared stems a better alternative for total hip arthroplasty?; Postoperative periprosthetic fracture following hip arthroplasty with a polished taper slip versus composite beam stem; Is oral tranexamic acid as good as intravenous?; Stem design and the risk of early periprosthetic femur fractures following THA in elderly patients; Does powered femoral broaching compromise patient safety in total hip arthroplasty?

Reoperation risk of periprosthetic fracture after primary total hip arthroplasty using a collared cementless or a taper-slip cemented stem.

The aim of this study was to determine both the incidence of, and the reoperation rate for, postoperative periprosthetic femoral fracture (POPFF) after total hip arthroplasty (THA) with either a collared cementless (CC) femoral component or a cemented polished taper-slip (PTS) femoral component. We performed a retrospective review of a consecutive series of 11,018 THAs over a ten-year period. All POPFFs were identified using regional radiograph archiving and electronic care systems. A total of 11,018 THAs were implanted: 4,952 CC femoral components and 6,066 cemented PTS femoral components. Between groups, age, sex, and BMI did not differ. Overall, 91 patients (0.8%) sustained a POPFF. For all patients with a POPFF, 16.5% (15/91) were managed conservatively, 67.0% (61/91) underwent open reduction and internal fixation (ORIF), and 16.5% (15/91) underwent revision. The CC group had a lower POPFF rate compared to the PTS group (0.7% (36/4,952) vs 0.9% (55/6,066); p = 0.345). Fewer POPFFs in the CC group required surgery (0.4% (22/4,952) vs 0.9% (54/6,066); p = 0.005). Fewer POPFFs required surgery in males with a CC than males with a PTS (0.3% (7/2,121) vs 1.3% (36/2,674); p < 0.001). Male patients with a PTS femoral component were five times more likely to have a reoperation for POPFF. Female patients had the same incidence of reoperation with either component type. Of those having a reoperation, 80.3% (61/76) had an ORIF, which could greatly mask the size of this problem in many registries.

The Treatment of Periprosthetic Fracture Revision of the Humerus with “Bamboo Support” Structural Allograft Technique—Atrophic Non-Union of a Post-Operative Periprosthetic Fracture after Reverse Total Shoulder Arthroplasty: A Case Report

Periprosthetic fractures are a serious complication of joint replacement surgery. With the growing prevalence of reverse total shoulder arthroplasty (RTSA), the incidence of relatively uncommon periprosthetic humeral fractures has increased. Here, we present the unique case of a 74-year-old woman who developed atrophic non-union after plate osteosynthesis for a periprosthetic fracture associated with RTSA. Fixation failure was evident 3 months after the surgical intervention; the patient underwent a 3-month course of arm sling immobilization. However, bone resorption continued, and varus angulation of the fracture developed. In this case, surgical strategy involved the use of long proximal humerus internal locked system plate (DePuy Synthes, Paoli, PA, USA), augmented with autologous iliac bone graft and allogenic humerus structural bone graft with the “bamboo support technique”, fixed with Cable System (DePuy Synthes, Paoli, PA, USA). No reports have addressed the management of failed periprosthetic fractures using allogeneic humeral strut bone grafts. This report aims to fill the gap by presenting a novel surgical technique for the management of periprosthetic fractures associated with RTSA in case of treatment failure.

Controlled posterior condylar milling technique for unicompartmental knee arthroplasty minimises tibia resection during gap balancing: Short-term clinical results.

The purpose of this study was to demonstrate the clinical utility of controlled posterior condylar milling (CPCM) in gap balancing while minimally resecting the tibia during fixed-bearing unicompartmental knee arthroplasty (UKA). This study is a retrospective cohort study. Patients who underwent medial UKA for isolated medial compartment osteoarthritis with a minimum follow-up of 2 years were included. The patients were divided into two groups: the conventional group (n = 56) and the CPCM group (n = 66). In the CPCM group, the proximal tibia was resected at the level of the distal end of the subchondral bone. If the flexion gap was tighter than extension, the posterior condyle was additionally milled to adjust gap tightness. Standing knee X-ray and scanogram were used to evaluate alignment and tibia resection amount. Range of motion (ROM) and Western Ontario McMaster Universities Osteoarthritis Index (WOMAC) scores were used to evaluate clinical outcomes. The CPCM group showed significantly smaller tibia resection (3.6 ± 1.9 mm) compared to the conventional group (5.2 ± 2.7 mm) (p < 0.001). Postoperative ROM (133.0 ± 8.3°, 135.2 ± 7.2°, n.s.) and WOMAC (19.3 ± 13.6, 23.6 ± 17.7, n.s.) were not significantly different between the two groups. Postoperative periprosthetic fractures occurred in two patients in conventional group, while the CPCM group had no periprosthetic fractures. The CPCM technique may be a simple and useful intraoperative technique that can achieve minimal tibia resection and promising clinical outcomes while easily adjusting gap tightness between flexion and extension during medial fixed-bearing UKA. Level III.

Risk factors for periprosthetic femoral fracture risk around a cemented polished taper-slip stem using an osteoporotic composite bone model.

This biomechanical study aimed to determine if variations in stem material, stem geometry, stem offset and cement viscosity affect mechanical resistance to postoperative periprosthetic fracture (PFF) after hip arthroplasty with a commonly used cemented polished taper-slip (PTS) stem (CPT, Zimmer Biomet) in a novel osteoporotic composite femoral bone model. Thirty-six osteoporotic composite femoral models were tested using a standardised in-vitro loading technique to simulate a typical PFF. Outcome measures were torque to failure (N), fracture energy (N/m2) and rotation to failure (°). Comparisons were made by stem material (cobalt chrome vs stainless steel), stem geometry (CPT stem vs Exeter stem), stem offset (standard offset vs extra extended offset) and cement viscosity (high viscosity vs low viscosity). Statistical comparisons were carried out with significance set at p < 0.05. All tested samples produced clinically representative fracture patterns with varying degrees of bone and cement comminution. There was no statistically significant difference in torque to failure, fracture energy or rotation to failure between any of the compared variables (all p > 0.05). This is the first biomechanical study on mechanical resistance to PFF using osteoporotic composite bone models. For the CPT stem, it confirms that stem material, stem offset, stem geometry and cement viscosity do not affect mechanical resistance to PFF in an osteoporotic bone model.