Addition Of Plasticizer Research Articles

Exploring polystyrene weathering behavior: From surface traits to micro(nano)plastics and additives release

Plastic weathering in the natural environment is a dynamic and complex process, where the release of microplastics, nanoplastics and additives poses potential threats to ecosystems. Understanding the release of different weathering products from plastics is crucial for predicting and assessing the environmental hazards of plastics. This study systematically explored these phenomena by exposing polystyrene (PS) to UV irradiation and mechanical agitation for different durations (1 day, 5 days, 10 days, 20 days). The degree of aging, yellowing, brittleness, and the abundance of carbonyl (CO) functional groups in PS were all gradually increasing over time. The weathering pattern of PS surfaces manifested as initial particle oxidation followed by later cracks or flakes formation. The release of products was positively correlated with the aging degree of plastics, as well as among the various released products. Laser infrared and Raman tests indicated that, for microplastics, the size range of 10–20 μm consistently dominated over time, while the primary size range of nanoplastics shifted towards smaller sizes. Additives and other soluble products were prone to release from weathering plastics, with 20 different chemicals detected after 20 d. The release of plastic additives was closely related to aging time, additive type, and quantity. This study contributes to our understanding of the weathering process of plastics, clarifies the release patterns of products over time, and the relationships among different products. It helps predict and assess the environmental pollution caused by plastics.

Open dumping site as a point source of microplastics and plastic additives: A case study in Thailand

Microplastics (MPs) and plastic additive chemicals are emerging pollutants of great concerns around the world. Open dumping sites can be important sources of those pollutants in emerging countries, but little is known about their occurrence, distribution, transport pathway, and remediation approach. This study aimed to obtain the comprehensive dataset on plastic pollution in an open dumping site in Thailand, including (1) the polymer types and organic/inorganic plastic additives in plastic garbage, (2) horizontal distribution of MPs and plastic additives in the surface soil, (3) the effects of soil-capping treatment, and (4) the vertical transport. First, thirty-two plastic garbage collected from the dumping site were analyzed, and a total of 40 organic chemicals (mean: 1400,000 ng/g dw) and 7 heavy metals (mean: 2,030,000 ng/g dw) were identified. The burdens stored in the dumping site were estimated to reach to 3.3–18 tons for organic additives and 4.9–26 tons for heavy metals. In the surface soil analysis, 13 types of polymers in MPs, 20 elements, and 37 organic plastic additives were detected. The pollution levels were significantly higher near the dumping site than at control sites, indicating that the open dumping site is a point source of MPs and plastic additives. Interestingly, a significantly positive correlation was found between the concentrations of MPs and organic additives in soil. This suggests that MPs act as carriers of plastic-derived chemicals. Soil-capping treatment (including removal of some trash) drastically mitigated the contaminant levels in the surface soil, indicating this treatment is one of the effective approaches to control the horizontal distribution of MPs and plastic additives. However, soil core analyzes implied that the vertical transport is still continued even after soil-capping treatment. Our findings provided the comprehensive dataset to support for understanding plastic pollution in the open dumping site.

Plasticization of polyacrylamide

Based on literature data, the influence of various plasticizing and modifying substances on the glass transition temperature of polyacrylamide was analyzed. The possibility of using plasticizing additives to improve the technological and operational characteristics of polyacrylamide and compositions based on it is considered.

Microplastics affect ecosystem multifunctionality: Increasing evidence from soil enzyme activities

AbstractMicroplastics (MPs) as emerging contaminants have a global occurrence, including both terrestrial and marine ecosystems. Soil enzymes contribute to maintaining ecosystem multifunctionality, for example, nutrient cycling, organic material decomposition, and carbon and climate regulation. Our present review highlights the impacts of MPs on soil enzyme activities, influencing factors, and the underlying mechanisms. Increasing findings confirm that MPs can change the activities of a range of soil enzymes involved in the biogeochemical cycling of C and N. However, current results are highly controversial. The effects of MPs highly vary from significant to nonsignificant and are dependent on polymer type, biodegradability, dosage, size, shape, and aging degree of MPs, and exposure conditions. Compared to traditional MPs, biodegradable MPs generally show more pronounced effects. MPs can change soil enzyme activities via different pathways. On one hand, MPs can directly change soil enzyme structure, leading to alterations in enzyme activity. On the other hand, MPs can create unique habitats, provide carbon sources for specific functional microbes producing enzymes, and release plastic additives and pollutants disturbing the production of these enzymes. Furthermore, MPs can alter soil physicochemical and biological properties, the availability of substrates, plants and soil fauna, regulating soil enzymes and their functions. In conclusion, MPs can regulate soil enzyme activities and pose a profound impact on ecosystem multifunctionality.

High Strength UV-Resistant Composite Film of Fe3+-Coordination Lignin/PVA.

The literature on polyvinyl alcohol (PVA) films is extensive, however, these methods often necessitate intricate synthesis processes or the addition of plasticizers to modify the strength and water solubility of the PVA material. A high-strength UV radiation-resistant composite film by chelating Fe3+ with lignin and PVA, which exhibits excellent hydrolysis resistance is developed. This composite film is prepared simply by incorporating a small amount of dealkalized lignin (APPL) and ferric chloride (FeCl3) into PVA through a straightforward composite process. During the scanning test, it is noted that the film exhibits a high density of uniformly dispersed particles, endowing it with efficient ultraviolet absorption capabilities. The infrared and anti-dissolution tests reveal that the coordination of Fe3+ with lignin imparts an outstanding hydrolysis resistance to the film, obviating the need for any extender, curing agent, acid or base. The tensile fracture strength reaches an impressive 187.81Mpa in the tensile test. UV and indicator card tests unequivocally demonstrate that the film achieves a remarkable 100% anti-UV efficiency. This Fe3+ chelated lignin/PVA composite film, with its facile preparation, environmental sustainability, high strength, and outstanding anti-ultraviolet efficiency, can be deployed across diverse applications requiring robust protection against ultraviolet radiation.

Development of a supramolecular solvent–based extraction method for application to quantitative analyses of a wide range of organic contaminants in indoor dust

This study investigates the efficacy of supramolecular solvent (SUPRAS) in extracting a diverse spectrum of organic contaminants from indoor dust. Initially, seven distinct SUPRAS were assessed across nine categories of contaminants to identify the most effective one. A SUPRAS comprising Milli-Q water, tetrahydrofuran, and hexanol in a 70:20:10 ratio, respectively, demonstrated the best extraction performance and was employed for testing a wider array of organic contaminants. Furthermore, we applied the selected SUPRAS for the extraction of organic compounds from the NIST Standard Reference Material (SRM) 2585. In parallel, we performed the extraction of NIST SRM 2585 with conventional extraction methods using hexane:acetone (1:1) for non-polar contaminants and methanol (100%) extraction for polar contaminants. Analysis from two independent laboratories (in Norway and the Czech Republic) demonstrated the viability of SUPRAS for the simultaneous extraction of twelve groups of organic contaminants with a broad range of physico-chemical properties including plastic additives, pesticides, and combustion by-products. However, caution is advised when employing SUPRAS for highly polar contaminants like current-use pesticides or volatile substances like naphthalene.

Coordinated responses of rice (Oryza sativa) to the stresses of benzotriazole ultraviolet stabilizers (BZT-UVs): Antioxidative system, photosynthetic activity, and metabolic regulation

Massive use of plastic products has caused their accumulation in soils, releasing large amounts of endogenous plastic additives (e.g., benzotriazole ultraviolet stabilizers, in short BZT-UVs) into terrestrial ecosystems. However, their plant toxicity is little known. Herein, we investigated the occurrence of BZT-UVs in contaminated farmland and selected three BZT-UV congeners to explore their toxic effects on the antioxidant, photosynthetic, and metabolic perturbation on rice (Oryza sativa). Results showed that the mean concentrations of ∑BZT-UVs in soil and plant samples were 180.7 ng/g dw and 156.4 ng/g dw, respectively. UV-P, UV-327 and UV-328 were the dominant BZT-UV congeners in both of soils and plants. Three BZT-UV congeners caused oxidative damages to rice in a dose-dependent manner, especially for UV-328. Functional genes involved in chlorophyll synthetases was inhibited by over 50 % under the stress of BZT-UVs, whereas those responsible for chlorophyll degradation were obviously promoted. The chlorophyll content was thus decreased, leading to a weakened photosynthesis system and an unbalanced carbon metabolism. The transcriptome and metabolome proved that the flux of carbohydrate metabolism and amino acid metabolism were obviously promoted in plants induced by BZT-UVs, which could inhibit the growth of rice. These findings offered insights into the coordinated responses of plants and advanced our understanding of potential ecological risks of BZT-UVs to terrestrial ecosystems.

Metabolic activity of gut microbial enrichment cultures from different marine species and their transformation abilities to plastic additives

The role of the gut microbiota in host physiology has been previously elucidated for some marine organisms, but little information is available on their metabolic activity involved in transformation of environmental pollutants. This study assessed the metabolic profiles of the gut microbial cultures from grouper (Epinephelus coioides), green mussel (Perna viridis) and giant tiger prawn (Penaeus monodon) and investigated their transformation mechanisms to typical plastic additives. Community-level physiological profiling analysis confirmed the utilization profiles of the microbial cultures including carbon sources of carbohydrates, amines, carboxylic acids, phenolic compounds, polymers and amino acids, and the plastic additives of organophosphate flame retardants, tetrabromobisphenol A derivates and bisphenols. Using in vitro incubation, triphenyl phosphate (TPHP) was found to be rapidly metabolized into diphenyl phosphate by the gut microbiota as a representative ester-containing plastic additive, whereas the transformation of BPA (a representative phenol) was relatively slower. Interestingly, all three kinds of microbial cultures efficiently transformed the hepatic metabolite of BPA (BPA-G) back to BPA, thereby increasing its bioavailability in the body. The specific enzyme analysis confirmed the ability of the gut microbiota to perform the metabolic reactions. The results of 16S rRNA sequencing and network analysis revealed that the genera Escherichia-Shigella, Citrobacter, and Anaerospora were functional microbes, and their collaboration with fermentative microbes played pivotal roles in the transformation of the plastic additives. The structure-specific transformations by the gut microbiota and their distinct bioavailability deserve more attention in the future.

Assessing the Binding of Plastics Additives at Brønsted Acid Sites of Zeolites

Assessing the Binding of Plastics Additives at Brønsted Acid Sites of Zeolites

Transparent maltitol- cellulose nanocrystal film for high performance barrier

The broad applications of cellulose nanocrystal (CNC) films are restricted by their low resistance against water and brittleness. In this study, high barrier transparent films composed of CNCs and maltitol, used as a bio-plasticizer (at up to 30% weight), were prepared by spray deposition. Addition of plasticizer increased the optical transmittance of the films. It also improved elongation at break and flexibility of the films, while reducing Young’s modulus and tensile strength. The barrier properties of CNC films plasticized with maltitol were significantly improved over CNC. In particular, films containing 30 wt.% maltitol showed a water vapor permeability of 3.67 × 10–12 (g/Pa.s.m) and oxygen permeability of 4.75 (cm3.µm/m2.day.Pa) corresponding to 94% and 78% reductions over CNC films, respectively. This remarkable barrier improvement is attributed to a combination of decreased porosity and the interaction of hydroxy groups of maltitol and CNCs. This interaction led to a reduction of the free hydroxy groups available to interact with the water molecules diffusing in the nanocomposite films, as confirmed by dynamic vapor sorption measurements. This study presents maltitol as a green plasticizer significantly improving the CNC film properties and enabling new barrier applications.

Novel strategies for the determination of plastic additives derived from agricultural plastics in soil using ultrahigh-performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS)

Certain agricultural plastics, i.e., mulching films, are generally considered as potent sources of micro- and nanoplastics (MNPs), due to their direct application on soil and waste mishandling. During the synthesis and fabrication of such agricultural plastics, it is necessary to use chemicals, the so-called plastic additives (PAs), improving the physicochemical properties of the final polymeric product. However, since PAs are loosely bound on the polymer matrix, they can potentially leach into the soil environment with unidentified effects. Clearly, to monitor the fate of PAs in the terrestrial ecosystem, it is necessary to develop accurate, sensitive and robust analytical methods. To this end, a comprehensive analytical strategy was developed for monitoring 16 PAs with diverse physicochemical properties (partition coefficient; −3 < logP<19) in soil samples using ultra-high-performance liquid chromatography coupled to tandem mass spectrometry (UHPLC-MS/MS). For this purpose, two different extraction procedures were developed, namely, a single step ultrasound-assisted extraction (UAE) using ethyl acetate or an aqueous solution of methanol and a binary extraction, combining Quick, Easy, Cheap, Effective, Rugged and Safe (QuEChERS) and UAE principles with n-hexane as the extractant. Interestingly, within the sample preparation investigation, we identified in-lab contamination sources of PAs, e.g., centrifuge tubes or microfilters. Such consumables are made of plastic contaminating the procedural blanks and omitting their use was necessary to acquire satisfactory analytical performance. In detail, method validation was performed for 16 compounds achieving recoveries mainly in the range 70–120 %, repeatability (expressed as relative standard deviation, RSD %) < 20 % and limits of quantification (LOQs) ranging between 0.2 and 20 ng/g dry weight (dw). Importantly, the presented strategies are added to the very limited available for PA determination in soil, a topical issue with a significant and rather understudied impact on agriculture.

The effects of plastisphere on the physicochemical properties of microplastics.

The plastisphere is the microbial communities that grow on the surface of plastic debris, often used interchangeably with plastic biofilm or biofouled plastics. It can affect the properties of the plastic debris in multiple ways. This review aims to present the effects of the plastisphere on the physicochemical properties of microplastics systematically. It highlights that the plastisphere modifies the buoyancy and movement of microplastics by increasing their density, causing them to sink and settle out. Smaller and film microplastics are likely to settle sooner because of larger surface areas and higher rates of biofouling. Biofouled microplastics may show an oscillating movement in waterbodies when settling due to diurnal and seasonal changes in the growth of the plastisphere until they come close to the bottom of the waterbodies and are entrapped by sediments. The plastisphere enhances the adsorption of microplastics for metals and organic pollutants and shifts the adsorption mechanism from intraparticle diffusion to film diffusion. The plastisphere also increases surface roughness, reduces the pore size, and alters the overall charge of microplastics. Charge alteration is primarily attributed to changes in the functional groups on microplastic surfaces. The plastisphere introduces carbonyl, amine, amide, hydroxyl, and phosphoryl groups to microplastics, causing an increase in their surface hydrophilicity, which could alter their adsorption behaviors for heavy metals. The plastisphere may act as a reactive barrier that enhances the leaching of polar additives. It may anchor bacteria that can break down plastic additives, resulting in decreased crystallinity of microplastics. This review contributes to a better understanding of how the plastisphere alters the fate, transport, and environmental impacts of microplastics. It points to the possibility of engineering the plastisphere to improve microplastic biodegradation.

P-266 Profiling redox effects induced by micro-nanoplastics in the female reproductive system: insights from human granulosa cells

Abstract Study question Are nano-microplastics (NMPs) taken up into human granulosa cells causing redox alterations? Summary answer NMPs enter into human granulosa cells and influence viability, energy production and antioxidant response. What is known already In recent decades, anthropogenic activities have increased the production of global plastic with millions of tons produced every year. Under the action of different physical, chemical or biological agents, plastic waste breaks down into (NMP) particles that propagate in the environment posing threats for human health. NMPs translocate from digestive tract to circulatory systems reaching organs and cells, including female gonads. Nevertheless, there is insufficient knowledge of their effects on reproductive functions in mammals to allow for an accurate risk assessment to be conducted and any risks managed in animal and human being contexts. Study design, size, duration Human ovarian granulosa cells (KGN cell line) were exposed to NMPs of different sizes (40 nm, 70 nm, 100 nm, and 200 nm) at concentrations ranging from 5 to 1000 μg/ml for 24 h and then processed for cellular and biochemical analyses Participants/materials, setting, methods NMPs uptake by granulosa cells was tested by the employment of fluorescent NMPs and observation under confocal laser scanning microscopy. Cell viability was assed by Cell Counting Kit8. The effects of NMPs on mitochondrial bioenergetics was evaluated by MitoStress kit (Seahorse Xfe96, Agilent). ATP production was evaluated by Cell Titer-Glo ATP assay kit (Promega). Key enzymes of antioxidant response were analysed at transcript and protein level by using real-time Taqman PCR and Western blotting, respectively. Main results and the role of chance We demonstrated that NMPs are taken up by granulosa cells at all tested concentrions along with significant decrease of cell vitality with all sizes and concentrations. Seahorse analysis revealed an altered bioenergetic profiles. ATP levels increase at 70, 100 and 200 nm (one way ANOVA p = 0.001) at all tested concentrations (one way ANOVA p &amp;lt; 0.001). The gene and protein expression of catalase (CAT) superoxide dismutase 1 (SOD1) and superoxide dismutase 2 (SOD2) increased at 5 and 100 µg/ml with all sizes except 100 nm, whereas the level of sirtuins (SIRT1 and SIRT3) transcripts and protein decreased. Reduced levels of phosphorylated NRF2, the transcription factor that activates antioxidant responsive elements (ARE)-mediated gene expression were observed. Limitations, reasons for caution The use of human cell lines requires careful consideration when transferring to human testing. Wider implications of the findings Our results contribute to understanding the effects of NMPs on mammalian fertility in order to find possible protective approaches. Considering that the level of susceptibility of mammalian female germ cells to NMPs is still unknown, present results contribute to evidence-based strategies allowing living and working in a health promoting environment. Trial registration number Effects of combined exposure to nano/microplastics and plastic additives on mammalian female fertility (CUP E53D2301100006)

Study of Characteristics of Bitumen and Aggregate with Use of Plastic Waste

Plastic is everywhere, and its use in different forms is increasing day by day despite discouragement from the government. Plastic waste disposal is a global issue since they are non-biodegradable and toxic in burning. Plastic pollution threatens food quality, human health, sanitation, and the ecosystem and contributes to climate change. The usage of plastic waste in elements (bitumen and aggregate) used in road construction was the main objective of this study. With use of appropriate plastic waste in building of road would not only reduce material cost but also contributes in solving plastic waste management issue. Nepal being a developing country with low Gross Domestic Product (GDP) where most of the districts are still deprived of good flexible pavement networks, plastic modified roads could be a value engineering and economic solution. The paper highlights by which method plastic waste can be used effectively in road construction by performing different experimental tests reflecting the characteristics of bitumen and aggregate on addition of plastic. The study has determined the penetration, softening point, ductility values of bitumen and impact and abrasion values of aggregate in addition to different percentage of plastic waste. According to the study, bitumen's penetration and ductility value drop with increasing plastic content, making it better suited for usage in warmer climates, but its softening point rises, ensuring a stronger resistance to flow in services. Comparably, when in aggregate plastic content rises, both its AIV value and its LA abrasion value fall, enhancing the aggregate's toughness and ability to endure greater wear and tear.

Polyamide 6 microplastics as carriers led to changes in the fate of bisphenol A and dibutyl phthalate in drinking water distribution systems: The role of adsorption and interfacial partitioning

Microplastics (MPs) co-exist with plastic additives and other emerging pollutants in the drinking water distribution systems (DWDSs). Due to their strong adsorption capacity, MPs may influence the occurrence of additives in DWDSs. The article investigated the occurrence of typical additives bisphenol A (BPA) and dibutyl phthalate (DBP) in DWDSs under the influence of polyamide 6 (PA6) MPs and further discussed the partitioning of BPA/DBP on PA6s, filling a research gap regarding the impact of adsorption between contaminants on their occurrence within DWDSs. In this study, adsorption experiments of BPA/DBP with PA6s and pipe scales were conducted and their interaction mechanisms were investigated. Competitive adsorption experiments of BPA/DBP were also carried out with site energy distribution theory (SEDT) calculations. The results demonstrated that PA6s might contribute to the accumulation of BPA/DBP on pipe scales. The adsorption efficiencies of BPA/DBP with both PA6s and pipe scales were 26.47 and 2.61 times higher than those with only pipe scales. It was noteworthy that BPA had a synergistic effect on the adsorption of DBP on PA6s, resulting in a 26.47 % increase in DBP adsorption. The article provides valuable insights for the compounding effect of different types of additives in water quality monitoring and evaluation.

Soft plastic fishing lures as a potential source of chemical pollution - Chemical analyses, toxicological relevance, and anglers’ perspectives

Soft plastic lures (SPLs) are commonly used artificial lures in recreational angling. Anglers regularly lose SPLs while fishing and there is little knowledge about the environmental impacts of lost SPLs. As with other plastic items, SPLs contain phthalates and other persistent additives that may leach into water. In this study, 16 randomly chosen SPLs of common models were analyzed for the leaching of persistent, water-soluble plastic additives, including phthalates. The estrogenicity of sample extracts from a subsample of 10 SPLs was assessed using luciferase reporter gene bioassays. Over a period of 61 days, 10 of the 16 SPLs leached the targeted phthalates dimethyl phthalate (DMP), diethyl phthalate (DEP), benzyl butyl phthalate (BBP) and di-n-butyl phthalate (DnBP) at median detectable concentrations ranging from 10 ng/g sample BBP to a median of 1001 ng/g DMP as well as 45 persistent, mobile, and toxic (PMT) plastic additives. DEP was detected most frequently in 8 SPLs, followed by BBP (2 SPLs), DMP (2 SPLs) and DnBP (1 SPL). The extract from one SPL with comparatively low phthalate and PMT plastic additive levels was active in the bioassay, indicating high endocrine-disruptive potential, presumably due to unknown additives that were not among the target substances of the methodology used in this study. The study was supplemented by a mail survey among anglers, in which attitudes of anglers towards SPLs were investigated. The survey indicated that SPL loss is a common event during angling. Most participants were concerned about potential ecological impacts of SPLs, wanted the ingredients of SPLs to be labelled and supported legal restrictions concerning toxic ingredients of SPLs. The study shows that SPLs are a potential source of environmental pollution, may pose human health risks and need further investigation, considering the frequent use of SPLs in recreational angling.

Visible characteristics and durability assessment of methyl methacrylate-based luminescent road marking using unencapsulated SrAl2O4: Eu2+, Dy3+ under coupling service conditions

Luminescent road markings (LRMs) have attracted growing attention due to the enhanced road visibility in low-light conditions and energy-saving benefits. However, high-performance strontium aluminate phosphors (SrAl2O4: Eu2+, Dy3+) are prone to hydrolyze while the conventional encapsulation methods of phosphors produces luminance loss. This paper presented a novel perspective using methyl methacrylate (MMA)-based two-component resins with unencapsulated phosphor (UP) to prepare LRMs with balanced luminescent properties road durability. Luminescent properties, skid resistance, impact resistance, and abrasion rate were evaluated as the response value to optimize the formulations through design of experimental (DOE) methods. The results show that LRMs exhibit outstanding water resistance and abrasion resistance after soaking for 120 hours coupling with wet-wheel abrasion for 20 minutes due to effective bonding between the carboxylic acid-based resin and phosphors. The luminance loss is less than 5 % after undergoing three-wheel abrasion following 480 hours of ultraviolet aging. Furthermore, the macroscopic performance was integrated with microscopic properties through morphological, elemental, and functional group analysis. The results demonstrated that the addition of plasticizer balanced the relationship among the mechanical properties by transforming the curing structure of the coating from resin-encapsulated granular protrusions into layer-like structures.

Co-exposure to microplastic and plastic additives causes development impairment in zebrafish embryos

Since the run off of microplastic and plastic additives into the aquatic environment through the disposal of plastic products, we investigated the adverse effects of co-exposure to microplastics and plastic additives on zebrafish embryonic development. To elucidate the combined effects between microplastic mixtures composed of microplastics and plastic additives in zebrafish embryonic development, polystyrene (PS), bisphenol S (BPS), and mono-(2-ethylhexyl) phthalate (MEHP) were chosen as a target contaminant. Based on non-toxic concentration of each contaminant in zebrafish embryos, microplastic mixtures which is consisted of binary and ternary mixed forms were prepared. A strong phenotypic toxicity to zebrafish embryos was observed in the mixtures composed with non-toxic concentration of each contaminant. In particular, the mixture combination with ≤ EC10 values for BPS and MEHP showed a with a strong synergistic effect. Based on phenotypic toxicity to zebrafish embryos, change of transcription levels for target genes related to cell damage and thyroid hormone synthesis were analyzed in the ternary mixtures with low concentrations that were observed non-toxicity. Compared with the control group, cell damage genes linked to the oxidative stress response and thyroid hormone transcription factors were remarkably down-regulated in the ternary mixture-exposed groups, whereas the transcriptional levels of cyp1a1 and p53 were significantly up-regulated in the ternary mixture-exposed groups (P < 0.05). These results demonstrate that even at low concentrations, exposure to microplastic mixtures can cause embryonic damage and developmental malformations in zebrafish, depending on the mixed concentration-combination. Consequently, our findings will provide data to examine the action mode of zebrafish developmental toxicity caused by microplastic mixtures exposure composed with microplastics and plastic additives.

Differential impacts of polyethylene microplastic and additives on soil nitrogen cycling: A deeper dive into microbial interactions and transformation mechanisms

The impact of microplastics and their additives on soil nutrient cycling, particularly through microbial mechanisms, remains underexplored. This study investigated the effects of polyethylene microplastics, polyethylene resin, and plastic additives on soil nitrogen content, physicochemical properties, nitrogen cycling functional genes, microbial composition, and nitrogen transformation rates. Results showed that all amendments increased total nitrogen but decreased dissolved total nitrogen. Polyethylene microplastics and additives increased dissolved organic nitrogen, while polyethylene resin reduced it and exhibited higher microbial biomass. Amendments reduced or did not change inorganic nitrogen levels, with additives showing the lowest values. Polyethylene resin favored microbial nitrogen immobilization, while additives were more inhibitory. Amendment type and content significantly interacted with nitrogen cycling genes and microbial composition. Distinct functional microbial biomarkers and network structures were identified for different amendments. Polyethylene microplastics had higher gross ammonification, nitrification, and immobilization rates, followed by polyethylene resin and additives. Nitrogen transformation was driven by multiple functional genes, with Proteobacteria playing a significant role. Soil physicochemical properties affected nitrogen content through transformation rates, with C/N ratio having an indirect effect and water holding capacity directly impacting it. In summary, plastic additives, compared to polyethylene microplastics and resin, are less conducive to nitrogen degradation and microbial immobilization, exert significant effects on microbial community structure, inhibit transformation rates, and ultimately impact nitrogen cycling.

Effects of biodegradable microplastics and straw addition on soil greenhouse gas emissions

Large pieces of plastic are transformed into microplastic particles through weathering, abrasion, and ultraviolet radiation, significantly impacting the soil ecosystem. However, studies on biodegradable microplastics replacing traditional microplastics as agricultural mulching films to drive the biogeochemical processes influenced by GHG are still in their initial stages, with limited relevant reports available. This study sought to investigate the effects of microplastic and straw addition on CO2 and N2O emissions in different soils. Herein, yellow-brown soil (S1) and fluvo-aquic soil (S2) were utilized, each treated with three different concentrations of PLA (polylactic acid) microplastics (0.25%, 2%, and 7% w/w) at 25 °C for 35 days, with and without straw addition. The results showed that straw (1% w/w) significantly increased soil CO2 by 4.1-fold and 3.2-fold, respectively, and N2O by 1.8-fold and 1.8-fold, respectively, in cumulative emissions in S1 and S2 compared with the control. PLA microplastics significantly increased CO2 emissions by 71.5% and 99.0% and decreased N2O emissions by 30.1% and 24.7% at a high concentration (7% w/w, PLA3) in S1 and S2 compared with the control, respectively. The same trend was observed with the addition of straw and microplastics together. Structural equation modeling and redundancy analysis confirmed that soil physiochemical parameters, enzyme and microbial activities are key factors regulating CO2 and N2O emissions. The addition of microplastics is equivalent to the addition of carbon sources, which can significantly affect DOC, MBC, SOC and the abundance of carbon-associated bacteria (CbbL), thereby increasing soil CO2 emissions. The addition of microplastics alone inhibited the activity of nitrogen cycling enzymes (urease activity), increasing the abundance of denitrifying microbes. However, adding a high amount of microplastics and straw together released plastic additives, inhibiting microbial abundance and reducing the nitrogen cycle. These effects decreased NH4+-N and increased NO3−-N, resulting in decreased N2O emissions. This study indicates that biodegradable microplastics could reduce soil plastic residue pollution through degradation. However, their use could also increase CO2 emissions and decrease N2O emissions. Consequently, this research lays the groundwork for further investigation into the implications of utilizing biodegradable microplastics as agricultural mulch, particularly concerning soil geochemistry and GHG emissions.