Plastic Fragments Research Articles

Recognition and detection technology for microplastic, its source and health effects.

Microplastic (MP) is ubiquitous in the environment which appeared as an immense intimidation to human and animal health. The plastic fragments significantly polluted the ocean, fresh water, food chain, and other food items. Inadequate maintenance, less knowledge of adverse influence along with inappropriate usage in addition throwing away of plastics items revolves present planet in to plastics planet. The present study aims to focus on the recognition and advance detection technologies for MPs and the adverse effects of micro- and nanoplastics on human health. MPs have rigorous adverse effect on human health that leads to condensed growth rates, lessened reproductive capability, ulcer, scrape, and oxidative nervous anxiety, in addition, also disturb circulatory and respiratory mechanism. The detection of MP particles has also placed emphasis on identification technologies such as scanning electron microscopy, Raman spectroscopy, optical detection, Fourier transform infrared spectroscopy, thermo-analytical techniques, flow cytometry, holography, and hyperspectral imaging. It suggests that further research should be explored to understand the source, distribution, and health impacts and evaluate numerous detection methodologies for the MPs along with purification techniques.

Preliminary Report of Microplastic (MPs) Presence on East Java Freshwater Sponges at Brantas Porong River

Microplastics are plastic fragments in the size range of >1 μm to <5 mm. Microplastics are a global concern because of their presence in various ecosystems to organisms and their tendency to hurt organisms. Due to their small size, microplastics can be easily ingested by organisms, including sponges. Freshwater sponges are rare in the world. As a filter feeder organism, sponges can accumulate microplastics into their bodies. This study aims to analyze the physical characteristics of microplastic abundance in freshwater sponges in Porong River, Mojokerto City, East Java. Oncosclera asiatica and Eunapius carteri sponge samples were taken from Porong River at a depth of about 1 meter. Analysis of physical characteristics (size, color, and shape) was conducted using a stereo microscope and Optilab. The abundance of microplastics in O. asiatica was found to be 1150 particles/20 grams wet weight. The physical characteristics that dominate O. asiatica sponges are red and black fibers, black fragments, and pellets. The abundance of microplastics in E. carteri was found to be 2.850 particles/20 grams wet weight. The physical characteristics that dominate E. carteri sponges are white foam, crystal pellets, blue fibers, and black fragments.

Polyoxometalate nanocluster-infused triple IPN hydrogels for excellent microplastic removal from contaminated water: detection, photodegradation, and upcycling.

Microplastic (MP) pollution pervades global ecosystems, originating from improper plastic disposal and fragmentation due to factors like hydrolysis and biodegradation. These minute particles, less than 5 mm in size, have become omnipresent, impacting terrestrial, freshwater, and marine environments worldwide. Their ubiquity poses severe threats to marine life by causing physical harm and potentially transferring toxins through the food chain. Addressing this environmental crisis necessitates a sustainable strategy. Our proposed solution involves a highly efficient copper substitute polyoxometalate (Cu-POM) nanocluster infused triple interpenetrating polymer network (IPN) hydrogel, comprising chitosan (CS), polyvinyl alcohol (PVA), and polyaniline (PANI) (referred to as pGel@IPN) for mitigating MP contamination from water. This 3D IPN architecture, incorporating nanoclusters, also enhances the hydrogel's photodegradation capabilities. Our scalable approach offers a sustainable strategy to combat MPs in water bodies, as demostrated by the adsorption behaviors on the hydrogel matrix under varying conditions, simulating real-world scenarios. Evaluations of physicochemical properties, mechanical strength, and thermal behavior underscore the hydrogel's robustness and stability. Detecting minute MP particles remains challenging, prompting us to label MPs with Nile red for fluorescence microscopic analysis of their concentration and adsorption on the hydrogel. The catalytic properties of POM within the hydrogel facilitate UV-induced MP degradation, highlighting a sustainable solution. Our detailed kinetics and isotherm studies revealed pseudo-first-order and Langmuir models as fitting descriptors for MP adsorption, exhibiting a high maximum adsorption capacity (Qm). Notably, pGel@IPN achieved ∼95% and ∼93% removal efficiencies for polyvinyl chloride (PVC) and polypropylene (PP) MPs at pH ∼ 6.5, respectively, also demonstrating reusability for up to 5 cycles. Post-end-of-life, the spent adsorbent was efficiently upcycled into carbon nanomaterials, effectively removing the heavy metal Cr(VI), exemplifying circular economy principles. Our prepared hydrogel emerges as a potent solution for MP removal from water, promising effective mitigation of the emerging pollutants of MPs while ensuring sustainable environmental practices.

Ingestion of a Large Plastic Fragment by a Gilthead Seabream, Sparus aurata

Ingestion of a Large Plastic Fragment by a Gilthead Seabream, Sparus aurata

ОСОБЛИВОСТІ РОЗПОДІЛУ МАКРО- ТА МІКРОПЛАСТИКУ В МЕЖАХ ПЛЯЖЕВИХ ЗОН ВНУТРІШНЬОКОНТИНЕНТАЛЬНИХ МОРІВ (НА ПРИКЛАДІ ПЛЯЖЕВОЇ ЗОНИ М. ЮЖНЕ, УКРАЇНА)

Background. Suburban beaches within the Ukrainian coast of the northwestern shelf of the Black Sea, taking into account the density of industrial and social infrastructure, the proximity to the confluence of large rivers with significant catchment areas into the sea, are indicative of objects for carrying out regulatory studies of the distribution of plastic waste and microplastics in the components of the environment . Methods. The regularities of the distribution of plastic waste and microplastics within the coastal zone of the north-western part of the Black Sea were determined using the example of test sites in the city of Yuzhne (Odesa region, Ukraine). To analyze the quantitative and qualitative characteristics of the synthetic material and to determine the features of its formation, distribution and accumulation in the coastal zone, the method of filtering water flows of the surface runoff was used. Visual analysis of plastic polymers was performed and their types were determined using spectroscopy and OPUS 7.5 software. Results. The results of Raman spectroscopy studies proved that the majority of selected samples of macro- and microplastics are represented by polypropylene, polyethylene and polystyrene. It has been confirmed that the main part of the plastic has a high migration capacity within the coastal areas, which is determined by the transport of runoff during periods of wave activity and the absence of a permanent component in the sand layer within the beach. It was determined that for different dimensional categories of plastic fragments, their species composition changes radically. Polymeric synthetic objects larger than 1 cm are represented mainly by polypropylene, polystyrene, and high-density polyethylene products. In the category of finer dimensions of plastic fragments, both the species spectrum of polymers and their belonging to different economic segments of use is expanding. Synthetic fibers, which make up the majority of objects of the smallest particle size fraction - less than 0.1 mm - are present everywhere and in significant quantitative composition. Conclusions. Research shows that the parameters of the coastline (width, length, slope, shape, presence of vegetation, anthropogenic variability), hydrogen processes and the geological structure of the coastal zone have a significant impact on the formation of the conditions for the accumulation of plastics and microplastics. In order to further study the factors influencing the pollution of the beach area by plastic products and microplastics, monitoring studies are needed within the presented test areas.

The elemental fingerprint as a potential tool for tracking the fate of real-life model nanoplastics generated from plastic consumer products in environmental systems.

Metals and metalloids are widely used in producing plastic materials as fillers and pigments, which can be used to track the environmental fate of real-life nanoplastics in environmental and biological systems. Therefore, this study investigated the metal and metalloids concentrations and fingerprint in real-life model nanoplastics generated from new plastic products (NPP) and from environmentally aged ocean plastic fragments (NPO) using single particle-inductively coupled plasma-mass spectrometry (SP-ICP-TOF-MS) and transmission electron microscopy coupled with energy dispersive X-ray spectroscopy (TEM-EDX). The new plastic products include polypropylene straws (PPS), polyethylene terephthalate bottles (PETEB), white low-density polyethylene bags (LDPEB), and polystyrene foam shipping material (PSF). All real-life model nanoplastics contained metal and metalloids, including Si, Al, Sr, Ti, Fe, Ba, Cu, Pb, Zn, Cd, and Cr, and were depleted in rare earth elements. Nanoplastics generated from the white LDPEB were rich in Ti-bearing particles, whereas those generated from PSF were rich in Cr, Ti, and Pb. The Ti/Fe in the LDPEB nanoplastics and the Cr/Fe in the PSF nanoplastics were higher than the corresponding ratios in natural soil nanoparticles (NNPs). The Si/Al ratio in the PSF nanoplastics was higher than in the NNPs, possibly due to silica-based fillers. The elemental ratio of Si/Al, Fe/Cr, and Fe/Ni in the nanoplastics derived from ocean plastic fragments was intermediate between the nanoplastics derived from real-life plastic products and NNPs, indicating a combined contribution from pigments and fillers used in plastics and from natural sources. This study provides a method to track real-life nanoplastics in controlled laboratory studies based on nanoplastic elemental fingerprints. It expands the realm of nanoplastics that can be followed based on their metallic signatures to all kinds of nanoplastics. Additionally, this study illustrates the importance of nanoplastics as a source of metals and metal-containing nanoparticles in the environment.

Microplastic Removal in Wastewater Treatment Plants (WWTPs) by Natural Coagulation: A Literature Review.

Urban industrialization has caused a ubiquity of microplastics in the environment. A large percentage of plastic waste originated from Southeast Asian countries. Microplastics arising from the primary sources of personal care items and industrial uses and the fragmentation of larger plastics have recently garnered attention due to their ubiquity. Due to the rising level of plastic waste in the environment, the bioaccumulation and biomagnification of plastics threaten aquatic and human life. Wastewater treatment plant (WWTP) effluents are one of the major sources of these plastic fragments. WWTPs in Southeast Asia contribute largely to microplastic pollution in the marine environment, and thus, further technological improvements are required to ensure the complete and efficient removal of microplastics. Coagulation is a significant process in removing microplastics, and natural coagulants are far superior to their chemical equivalents due to their non-toxicity and cost-effectiveness. A focused literature search was conducted on journal repository platforms, mainly ScienceDirect and Elsevier, and on scientific databases such as Google Scholar using the keywords Wastewater Treatment Plant, Coagulation, Microplastics, Marine Environment and Southeast Asia. The contents and results of numerous papers and research articles were reviewed, and the relevant papers were selected. The relevant findings and research data are summarized in this paper. The paper reviews (1) natural coagulants for microplastic removal and their effectiveness in removing microplastics and (2) the potential use of natural coagulants in Southeast Asian wastewater treatment plants as the abundance of natural materials readily available in the region makes it a feasible option for microplastic removal.

Setting new standards: Multiphasic analysis of microplastic mineralization by fungi

Plastic materials provide numerous benefits. However, properties such as durability and resistance to degradation that make plastic attractive for variable applications likewise foster accumulation in the environment. Fragmentation of plastics leads to the formation of potentially hazardous microplastic, of which a considerable amount derives from polystyrene. Here, we investigated the biodegradation of polystyrene by the tropical sooty mold fungus Capnodium coffeae in different experimental setups. Growth of C. coffeae was stimulated significantly when cultured in presence of plastic polymers rather than in its absence. Stable isotope tracing using 13C-enriched polystyrene particles combined with cavity ring-down spectroscopy showed that the fungus mineralized polystyrene traces. However, phospholipid fatty acid stable isotope probing indicated only marginal assimilation of polystyrene-13C by C. coffeae in liquid cultures. NMR spectroscopic analysis of residual styrene contents prior to and after incubation revealed negligible changes in concentration. Thus, this study suggests a plastiphilic life style of C. coffeae despite minor usage of plastic as a carbon source and the general capability of sooty mold fungi to stimulate polystyrene mineralization, and proposes new standards to identify and unambiguously demonstrate plastic degrading capabilities of microbes.

Continuous generation and release of microplastics and nanoplastics from polystyrene by plastic-degrading marine bacteria

Plastic waste released into the environments breaks down into microplastics due to weathering, ultraviolet (UV) radiation, mechanical abrasion, and animal grazing. However, little is known about the plastic fragmentation mediated by microbial degradation. Marine plastic-degrading bacteria may have a double-edged effect in removing plastics. In this study, two ubiquitous marine bacteria, Alcanivorax xenomutans and Halomonas titanicae, were confirmed to degrade polystyrene (PS) and lead to microplastic and nanoplastic generation. Biodegradation occurred during bacterial growth with PS as the sole energy source, and the formation of carboxyl and carboxylic acid groups, decreased heat resistance, generation of PS metabolic intermediates in cultures, and plastic weight loss were observed. The generation of microplastics was dynamic alongside PS biodegradation. The size of the released microplastics gradually changed from microsized plastics on the first day (1344 nm and 1480 nm, respectively) to nanoplastics on the 30th day (614 nm and 496 nm, respectively) by the two tested strains. The peak release from PS films reached 6.29 × 106 particles/L and 7.64 × 106 particles/L from degradation by A. xenomutans (Day 10) and H. titanicae (Day 5), respectively. Quantification revealed that 1.3% and 1.9% of PS was retained in the form of micro- and nanoplastics, while 4.5% and 1.9% were mineralized by A. xenomutans and H. titanicae at the end of incubation, respectively. This highlights the negative effects of microbial degradation, which results in the continuous release of numerous microplastics, especially nanoplastics, as a notable secondary pollution into marine ecosystems. Their fates in the vast aquatic system and their impact on marine lives are noted for further study.

Fast and portable fluorescence lifetime analysis for early warning detection of micro- and nanoplastics in water

The presence of plastic fragments in aquatic environments, particularly at the micro- and nano-scale, has become a significant global concern. However, current detection methods are limited in their ability to reveal the presence of such particles in liquid samples. In this study, we propose the use of a fluorescence lifetime analysis system for the detection of micro- and nanoplastics in water. This approach relies on the inherent endogenous fluorescence of plastic materials and involves the collection of single photons emitted by plastic fragments upon exposure to a pulsed laser beam. Briefly, a pulsed laser beam (repetition frequency = 40 MHz) shines onto a sample solution, and the emitted light is filtered, collected, and used to trace the time distributions of the photons with high temporal resolution. Finally, the fluorescence lifetime was measured using fitting procedures and a phasor analysis. Phasor analysis is a fit-free method that allows the measurement of the fluorescence lifetime of a sample without any assumptions or prior knowledge of the sample decay pattern. The developed instrument was tested using fluorescence references and validated using unlabelled micro- and nano-scale particles. Our system successfully detected polystyrene particles in water, achieving a remarkable sensitivity with a detection limit of 0.01 mg/mL, without the need for sample pre-treatment or visual inspection. Although further studies are necessary to enhance the detection limit of the technique and distinguish between different plastic materials, this proof-of-concept study suggests the potential of the fluorescence lifetime-based approach as a rapid, robust, and cost-effective method for early warning detection and identification of plastic contaminants in aquatic environments.

The digestive system of a cricket pulverizes polyethylene microplastics down to the nanoplastic scale

Microplastics (MPs; <5 mm) are a growing concern and a poorly understood threat to biota. We used a generalist insect (a cricket; Gryllodes sigillatus) to examine whether individuals would ingest and physically degrade MPs in their food. We fed crickets a range of concentrations (0, 2.5, 5, and 10% w/w) of fluorescent polyethylene MPs mixed into a standard diet and dissected the gut regions to isolate the MPs within. Comparing plastic content and fragment size within gut regions, we sought to identify whether and where crickets can fragment ingested MP particles. Given the digestive tract morphology of this species, we expected that the crickets would both ingest and egest the MPs. We also predicted that the MPs would be fragmented into smaller pieces during this digestive process. We found that G. sigillatus egested much smaller pieces than they ingested, and this fragmentation occurs early in the digestive process of this insect. We found this for both sexes as well as across the range of concentrations of MPs. The degree of plastic breakdown relative to plastic feeding time suggests that the ability to fragment MPs is intrinsic and not altered by how much time crickets have spent eating the plastics. The amount of plastics found in each region of the gut in relation to feeding time also suggests that this size and shape of PE microplastic does not cause any physical blockage in the gut. This lack of evidence for blockage is likely due to plastic breakdown. We found a ∼1000-fold reduction in plastic size occurs during passage through the digestive system, yielding particles very near nanoplastics (NPs; <1 μm), and likely smaller, that are then excreted back into the environment. These findings suggest that generalist insects can act as agents of plastic transformation in their environment if/when encountering MPs.

Assessment of the occurrence and interaction between pesticides and plastic litter from vineyard plots

In this research, aged plastic fragments collected from vineyards were characterized in terms of composition, residues of pesticides, and their potential to exchange these compounds with the aquatic media. To this end, we employed the qualitative and quantitative information provided by complementary analytical techniques, including chromatography, organic and inorganic mass spectrometry, infrared spectroscopy and electronic microscopy. Debris of weathered plastics were identified as polypropylene and polyethylene, containing different types of additives, from organic UV stabilizers to inorganic fillers, such as calcium salts. Regardless of polymer type, plastic litter collected from vineyards contained residues of pesticides, and particularly of fungicides, with total concentrations in the range of values from 114 ng g−1 to 76.4 μg g−1. Data obtained under different extraction conditions suggested that a fraction of these compounds was absorbed in aged polymers, penetrating inside the material. The parallel analysis of plastic litter and vineyard soils reflected higher pesticide residues in the former matrix. Furthermore, several fungicides, considered as labile in vineyard soils (i.e. zoxamide and folpet), were those showing the highest levels in plastic litter. Simulated sorption-desorption studies, with plastic debris in contact with surface water, demonstrated the higher affinity of aged materials by moderately polar pesticides than their new counterparts. For the first time, the manuscript highlights the presence of plastic litter in vineyards soils, reflecting the accumulation of several fungicides in this matrix, in some cases, with a different stability pattern to that observed in the soil from same vineyards.

Rapid detection of colored and colorless macro- and micro-plastics in complex environment via near-infrared spectroscopy and machine learning

To better understand the migration behavior of plastic fragments in the environment, development of rapid non-destructive methods for in-situ identification and characterization of plastic fragments is necessary. However, most of the studies had focused only on colored plastic fragments, ignoring colorless plastic fragments and the effects of different environmental media (backgrounds), thus underestimating their abundance. To address this issue, the present study used near-infrared spectroscopy to compare the identification of colored and colorless plastic fragments based on partial least squares-discriminant analysis (PLS-DA), extreme gradient boost, support vector machine and random forest classifier. The effects of polymer color, type, thickness, and background on the plastic fragments classification were evaluated. PLS-DA presented the best and most stable outcome, with higher robustness and lower misclassification rate. All models frequently misinterpreted colorless plastic fragments and its background when the fragment thickness was less than 0.1mm. A two-stage modeling method, which first distinguishes the plastic types and then identifies colorless plastic fragments that had been misclassified as background, was proposed. The method presented an accuracy higher than 99% in different backgrounds. In summary, this study developed a novel method for rapid and synchronous identification of colored and colorless plastic fragments under complex environmental backgrounds.

Quantitative photography for rapid, reliable measurement of marine macro‐plastic pollution

Abstract Plastics are now ubiquitous in the environment and have been studied in wildlife and in ecosystems for more than 50 years. Measurement of size, shape and colour data for individual fragments of plastic is labour‐intensive, unreliable and prone to observer bias, particularly when it comes to assessment of colour, which relies on arbitrary and inconsistently defined colour categorisations. There is a clear need for a standard method for data collection on plastic pollution, particularly one that can be readily automated given the number of samples involved. This study describes a new method for standardised photography of marine plastics in the 1–100 mm size range (meso‐ and macro‐plastics), including colour correction to account for any image‐to‐image variation in lighting that may impact colour reproduction or apparent brightness. Automated image analysis is then applied to detect individual fragments of plastic for quantitative measurement of size, shape, and colour. The method was tested on 3793 fragments of debris ingested by Flesh‐footed Shearwaters (Ardenna carneipes) on Lord Howe Island, Australia, and compare results from photos taken in two separate locations using different equipment. Photos were acquired of up to 250 fragments at a time with a spatial resolution of 70 μm/pixel and were colour‐corrected using a reference chart to ensure accurate reproduction of colour. The automated image analysis pipeline was found to have a 98% success rate at detecting fragments, and the different size and shape parameters that can be outputted by the pipeline were compared in terms of usefulness. The evidence shown in this study should strongly encourage the uptake of this method for cataloguing macro‐scale plastic pollution, as it provides substantially higher quality data with accurate, reliable measurements of size, shape and colour for individual plastics that can be readily compared between disparate datasets.

Abundance and characterization of microplastic pollution in the wildlife reserve, Ramsar site, recreational areas, and national park in northern Jakarta and Kepulauan Seribu, Indonesia

This is the first study to evaluate the presence and distribution of microplastics in sediments in the regions with a unique degree of complexity, such as wildlife reserve areas, a Ramsar site that connects directly to Greater Jakarta's mainland, recreational islands, and a marine national park. Microplastics of varying sizes and shapes are found in all places, with an increase trend in the abundance toward areas near to the epicenter of human activity. Comparatively to other marine protected areas, the amount of microplastics discovered is comparable; however, there is an upward trend. Season influences microplastic accumulation, with the dry season causing the greater accumulation. Small-sized microplastics and microplastics resulting from large plastic fragments were predominantly discovered. The properties of microplastics in the study region are dominated by polyethylene, polypropylene, polystyrene, polyvinyl chloride, and nylon. Additional in-depth research and waste reduction from all sources that involve all stakeholders are required to reduce the amount of contaminants entering the protected area.

Association between PAH and plastic fragments on Brazilian coast beaches: a baseline assessment.

Plastic materials have many destinies on the environment, and one of them is its continuous fragmentation, originating microplastics (MP). MP act as an adsorption surface for organic pollutants like polycyclic aromatic hydrocarbons (PAH). Due to its toxic and harmful properties, 16 PAH are defined as priorities in studies. Several works have evaluated the occurrence of MP and PAH individually in environmental matrices, but just a few have investigated their association. The present study aims to investigate PAH occurrence, sources, and concentration in MP from beach sediments of eight Brazilian coastal states. Sixteen PAH were analyzed by gas chromatography, in which 14 PAH were detected, and PAH total concentration (ΣPAH) ranged from 0.25 to 71.60ngg-1. In the North and Northeast regions, the low PAH concentrations in MP appear to be related to the intense hydrodynamic processes. Naphthalene levels on the Styrofoam were above the threshold effect level in two samples and near it on one; therefore, effects in the organisms might occur due to these PAH. The Southeast and South regions are the only ones with previous studies relating PAH with MP, and ΣPAH ranged from 0.34 to 2.52ngg-1. According to the diagnostic ratios, the PAH sources were associated with industrial and port activities, untreated effluent disposal, and urban runoff by pluvial waters. The highest ΣPAH level was found in the Styrofoam samples, suggesting that this MP type might contribute considerable to PAH dispersion on Brazilian coast beaches.

Macroplastic deposition and flushing in the Meuse river following the July 2021 European floods

Rivers play an important role in the macroplastics transport and retention dynamics in the environment. Therefore, gaining an understanding of these processes is vital in order to help determine the fate of macroplastic in the environment. During flood events the transport of floating macroplastic is known to increase. We compared plastic accumulation and flushing on sixteen riverbanks along the Dutch Meuse river during the period that includes the July 2021 extreme flood to plastic accumulation on the same riverbanks as during normal discharge conditions between 2018 and 2021. Here we show that following the flood small macroplastic categories ( cm) were flushed from the riverbanks, while larger soft plastic fragments (2.5–50 cm) and wet tissues were deposited. We found that for all plastic categories and for all riverbanks averaged, the plastic accumulation rate during the July 2021 flood was higher than that which would be expected for that time of year. However, the average accumulation rate for all locations during the period that included the flood was lower than the average accumulation rate over the Dutch winter (Oct/Nov–Feb/Mar). Our results show that litter category composition following the July 2021 flood differed from normal conditions. This indicates that plastic deposition and remobilization processes on riverbanks differ between extreme flood and annually average conditions. These observations contribute to a better understanding of the fate of macroplastic in the environment in terms of the drivers of both its transport and deposition.

Treatment Methods and Hazards Analysis of Microplastics in the Aquatic Environment

Microplastics (MPs) are tiny plastic shards with a diameter of less than 5 millimeters that are produced by many processes like the splintering of synthetic fibers. MPs pollution has become a serious problem for the ecosystem. These minute plastic fragments are already pervasive in terrestrial and aquatic habitats, endangering wildlife, ecosystems, and perhaps even human health. This paper lists and compares various MPs treatment methods, explains the potential hazards of MPs, and concludes with recommendations by comparing policies and measures in different countries. In this paper, MPs treatment methods are classified as physical, chemical and biological based on different mechanisms of action, and new treatment methods are found to have the advantage of saving resources and improving removal efficiency. The potential hazards of MPs are seen in the restriction of the activities of marine organisms, leading to drowning, asphyxiation or inflammatory reactions, and in the human population, where they enter the human system through the food chain and accumulate in various tissues, ultimately endangering health. Furthermore, by comparing the measures taken by countries to deal with plastic waste, countries should develop policies that are compatible with the disposal of MPs. This study has important implications for the development and innovation of MPs removal technology, providing a more effective and sustainable solution for countries to address MPs pollution.

Microplastics in Orthodontics

Introduction :The role of microplastics in the environment have become a major concern over the years .the leaching of microplastics from the materials used in the orthodontics has been increased .primary and secondary microplastics are leached from the materials such as tooth paste, retainers , resin-based composite and aligners. Microplastics and nano plastics are small plastic fragments of &lt;5 mm and &lt;1000 nm, respectively. Most commonly, MPs are defined as synthetic polymer particles or fibers with a diameter of 1–5000 μm , even though the lower limit has been extended down to 100 nm by the European Food and Safety Authority (EFSA). Their ingestion could cause oxidative stress and inflammatory lesions. Thus, it is important to enhance the understanding of microplastics to minimise the potential risks.

Screening and degradation characteristics of plastic-degrading microorganisms in film-mulched vegetable soil

In recent years, the incomplete recycle of residual mulch film (RMF) leads to the increasing richness of plastic fragment in soil, which poses a serious threat to the soil ecological environment. Therefore, the degradation of RMF in soil has aroused the interest of researchers. In this study, the degradation microorganisms were screened from film-mulched vegetable field, the results showed that seven potential plastic-degradation microorganisms were screened and identified, including four bacteria (Burkholderia cepacia, Burkholderia diffusa, Burkholderia aenigmatica, Chrysebacterium nepalense) and three fungi (Geotrichum candidum, Fusarium oxysporum and Trichoderma sp.). The results of degradation ability experiments showed that the weight loss rate of single strains ranges from 1.58 to 2.44% after 90 d. The loss rate of weight-average molecular weight (Mw) and number-average molecular weight (Mn) for single strains after 30 d were 2.61–22.40% and 17.92–39.18%, respectively. In addition, the weight loss rate of the mixed strains ranges from 1.34 to 1.62% after 90 d. The loss rate of Mw and Mn for mixed strains after 30 d were 8.04–10.06% and 20.06–39.25%, respectively. The comparing results showed that there may be inhibitory interactions between microorganisms in mixed strains are culture. This research can provide theoretical basis and data support for the control and disposal measures of RMF pollution.