Plant Surfaces Research Articles

Foredune initiation and early development through biophysical interactions

Coastal dunes result from complex interactions between sand transport, topography and vegetation. However, uncertainty still persists due to limited quantitative analyses, integrating plant distribution and morphologic changes. This study aims to assess the initiation and maintenance of feedback processes by analysing the early development stages of incipient foredunes, combining data on the evolution of the plant cover and communities and dune morphology. Over three years, the monitoring of a newly formed dune (1 ha plot) reveals the progressive plant colonisation and the episodic accumulation of sand around vegetated areas controlled by sediment availability. Distinct colonisation rates were observed, influenced by inherited marine conditions, namely topography and presence of beach wrack. Berm-ridges provided elevations above the critical threshold for plant colonisation and surface roughness, aiding sediment accumulation. Beach wrack above this threshold led to rapid expansion and higher plant concentration. In the initial stages, vegetation cover significantly influenced sediment accumulation patterns, with higher accumulation around areas with high plant cover and low slopes or around areas with sparse vegetation but milder slopes. As the dune system matured and complexity grew, the link between vegetation cover and accumulation became nonlinear. Mid to low coverages (5–30 %) retained most of the observed accumulation, especially when coupled with steep slopes, resulting from positive feedbacks between vegetation, topography and sand transport. As foredune developed, vegetation cover and diversity increased while inherited morphologies grew vertically, explaining the emergence of dune ridge morphological types. Flat surfaces lacking wrack materials experienced a three-year delay in colonisation and sand accumulation, leading to the formation of terrace-type incipient foredunes. These observations underline feedback processes during the early stages of dune formation, with physical feedbacks primarily driving initiation and biophysical feedbacks prevailing in subsequent colonisation stages.

Assessment of metals and metalloids agglutinated to airborne suspended particulate matter in selected plant species during the pre-and post-monsoon in the urban area

The elemental accumulation has emerged as a major environmental concern due to various anthropogenic sources such as vehicles, road dust, and industrial activities, contributing to the agglutination of elements to airborne Suspended Particulate Matter (SPM). SPM-bound elements accumulate on plant surfaces impact air quality and human health due to their noxiousness. Therefore, plants' ability to capture and mitigate air pollutants plays a crucial role in urban areas. This study aimed to investigate the levels and distribution of twenty-six elements, comprised of heavy metals (Cd, Pb, Cr, Cu Zn, Co, Ni, Fe, Mn, Ag, Mo, V, Ga, and Bi), light metals (B, As, Te, and Se), and metalloids (Al, Li, Sr, K, Mg, Na, Ca, and Ba) accumulated on the surface and inside the leaves of dominant plant species during the pre-and post-monsoon at six categorized (commercial, traffic-prone, residential, educational, greenbelt and industrial areas) locations in Delhi, India. In addition, the Metal Accumulation Index (MAI) was determined, and the statistical analysis was conducted using two-way ANOVA, Principal Component Analysis (PCA), and Hierarchical Cluster Analysis (HCA). In the pre-and post-monsoon, two-way ANOVA revealed significant differences (P < 0.05) in metal concentrations. During the pre-monsoon plants exhibited the highest metal accumulation (∼21%) at the Anand Vihar (commercial) in Delhi, with the maximum average concentrations of Cr (118.25 mg/kg), Cu (204.38 mg/kg), Zn (293.27 mg/kg), and Fe (2721.17 mg/kg). Ficus benghalensis L exhibited the maximum 213.73 MAI at the Anand Vihar in the pre-monsoon. Ni and Cr indicated the highest correlation (P < 0.05, r = 0.82) in the PCA test. HCA test revealed similarity (∼87.7%) at ITO (traffic-prone) and Okhla Phase-2 (industrial) in F. religiosa regarding metal concentration patterns. Findings highlighted seasonal elemental pollutants uptake dynamics of plant species and explored species-specific metal accumulation, revealing potential implications of metal-tolerant plants for urban greenbelt.

PHYLOGENETIC CONNECTIONS AND COMPARISONS OF THE AMINO ACID SEQUENCES OF SEVERAL PEPTIDE INDUCERS OF MICROBIAL ORIGIN- A FOUNDATION STUDY FOR DEVELOPMENT OF NOVEL BIOPESTICIDES

Peptides of microbial origin stand out as one of theprominent tools to elicit plant immunity. These peptides comprise one of thekey strategies of integrated pest management and are considered as candidatesto develop novel biopesticides. Manyresearch investigations have proved their potential in fending off plantpathogens and were described as sustainable plant protection strategies. Thepresent study was attempted to discover phylogenetic relationships and compareamino acid sequence alignments of various peptide elicitors of microbialorigin. Phylogenetic analysis of 33 microbial peptide elicitors resulted in twoclusters, one cluster contained 19 flagellin sequences, which is furtherdivided into one major (15 peptide sequences) and one (4 peptide sequences)minor subclusters. Further amino acid sequence alignments were carried outbased on the evolutionary relationships among the peptides. The amino acidsequence alignment of flagellin sequences using Clustal W did not present conservativeamino acid sequences except Serine (S), Alanine (A) and Aspartic acid (D).These conserved amino acids (SAxD) that are positioned in the protruding loopmay play a vital role in recognition by plant surface receptors. Alignment ofamino acid sequences of cold shock protein, xylanase, elongation factor andharpin from various sources did not present conservative amino acid sequencesexcept glycine. These investigations lay a theoretical foundation for exploringmany more microbial peptides for inducing plant resistance.

High enrichment factors in chemical analysis of progestins and in bioassays: insights beyond trace levels.

Concerns are growing about adverse effects of progestins on biota, even at ultra-trace concentrations. The enrichment factor (EF) from extraction of analytes in environmental samples that is needed for sample pre-concentration can affect not only performance of the analytical method but also the matrix effect. Therefore, the present study aimed to assess the influence of high sample EF on performance of the high-performance liquid chromatography with atmospheric pressure chemical ionization and photoionization coupled with high-resolution mass spectrometry (HPLC-APCI/APPI-HRMS) method for analysis of progestins in waste water treatment plant (WWTP) effluents and surface waters and analysis of (anti-)progestogenic activities measured by (anti-)PR-CALUX bioassays. The results showed that HPLC-APCI/APPI-HRMS coupled with solid-phase extraction and a high EF (33,333 Lwater/Lextract) enabled the detection of more compounds compared to samples with lower sample EF (10,000 Lwater/Lextract). The matrix effect did not increase proportionally compared to lower EFs (10,000 and 16,666 Lwater/Lextract), and lower limits of quantification were achieved in WWTP effluents and surface waters. The results of bioassays have shown that relative EF of 25 Lwater/Lbioassay appears high enough to detect progestogenic activity in treated waste water. Our study is one of the first to provide insights into sample pre-concentration in analysis of progestins and progestogenicity in aquatic environments.

Biophoton emission-based approach of the effects of systemic insecticides on the survival of Eurydema ventralis Kolenati, 1846 (Hemiptera: Pentatomidae) and on the photosynthetic activity of oilseed rape

The choice of effective crop protection technologies is a key factors in the economical production of oilseed rape. Insecticides belonging to the group of active substances butenolides and diamides are active substances available as seed treatments in oilseed rape and promising control tools in the crop protection technologies. Our laboratory experiment demonstrated that the experimental insecticides flupyradifurone and cyantraniliprole are both effective against Eurydema ventralis (Hemiptera: Pentatomidae) when used as a seed and in-crop treatments, but there is a fundamental difference in their insect mortality inducing effects. Flupyradifurone was found to have a total mortality 96 h after application based on basipetal translocation. In the case of cyantraniliprole, the insecticidal effect of the same treatment was 27% less. The experiment showed that the acropetal translocation of the tested active substances after seed treatment did not induce efficacy comparable to that of the basipetal translocation. The study of the biophoton emission of the plants demonstrated a verifiable correlation between the different application methods of the insecticides and the photon emission intensity per unit plant surface area. In conclusion, the systematic insecticides tested, in addition to having the expected insecticidal effect, interfere with plant life processes by enhancing photosynthetic activity.

Iron Plaque: A Shield against Soil Contamination and Key to Sustainable Agriculture.

Soils play a dominant role in supporting the survival and growth of crops and they are also extremely important for human health and food safety. At present, the contamination of soil by heavy metals remains a globally concerning environmental issue that needs to be resolved. In the environment, iron plaque, naturally occurring on the root surface of wetland plants, is found to be equipped with an excellent ability at blocking the migration of heavy metals from soils to plants, which can be further developed as an environmentally friendly strategy for soil remediation to ensure food security. Because of its large surface-to-volume porous structure, iron plaque exhibits high binding affinity to heavy metals. Moreover, iron plaque can be seen as a reservoir to store nutrients to support the growth of plants. In this review, the formation process of iron plaque, the ecological role that iron plaque plays in the environment and the interaction between iron plaque, plants and microbes, are summarized.

Prion Seeding Activity in Plant Tissues Detected by RT-QuIC.

Prion diseases such as scrapie, bovine spongiform encephalopathy (BSE), and chronic wasting disease (CWD) affect domesticated and wild herbivorous mammals. Animals afflicted with CWD, the transmissible spongiform encephalopathy of cervids (deer, elk, and moose), shed prions into the environment, where they may persist and remain infectious for years. These environmental prions may remain in soil, be transported in surface waters, or assimilated into plants. Environmental sampling is an emerging area of TSE research and can provide more information about prion fate and transport once shed by infected animals. In this study, we have developed the first published method for the extraction and detection of prions in plant tissue using the real-time quaking-induced conversion (RT-QuIC) assay. Incubation with a zwitterionic surfactant followed by precipitation with sodium phosphotungstate concentrates the prions within samples and allows for sensitive detection of prion seeding activity. Using this protocol, we demonstrate that prions can be detected within plant tissues and on plant surfaces using the RT-QuIC assay.

Air–plant interaction and air–soil exchange of polycyclic aromatic hydrocarbons in a large human-influenced reservoir in southwest China

The Three Gorges Reservoir (TGR) is totally manmade, strongly influenced by anthropogenic activity, and lies on the upper reaches of Yangtze River. The periodic storage and discharge of water from the Three Gorges Dam could have altered the original air-plant/soil interactions of contaminants in TGR. Herein, paired atmospheric gas–particle, air–plant, and air–soil samples were collected to investigate the air–plant interaction and air–soil exchange of 16 USEPA priority polycyclic aromatic hydrocarbons (PAHs). The air–plant interaction based on McLachlan's framework to our datasets suggests that PAHs were absorbed via gaseous deposition that was restricted by the plant–gas dynamic equilibrium. The equilibrium indicates a dynamic balance between the gaseous phase and plant surface in PAH absorption. The main limiting factor influencing the PAH uptake was the plant species rather than the atmospheric PAH concentration. The air–soil exchange of PAHs exhibited a net volatilization flux of 16.71 ng/m2/d from the soil to the air based on annual average. There was more volatilization and less deposition in summer and more deposition and less volatilization in autumn and winter. The soil serves as a secondary source of atmospheric PAHs. As the first attempt on probing the multi-interface geochemical process of PAHs, this study highlights the influence of manual water level manipulation from the TGD and environmental factors (such as temperature, humidity, and soil properties) on the regional fate of PAHs in the TGR.

Unveiling the microbial diversity of biofilms on titanium surfaces in full-scale water-cooling plants using metagenomics approach.

Microbial colonization on the titanium condenser material (TCM) used in the cooling system leads to biofouling and corrosion and influences the water supply. The primary investigation of the titanium condenser was infrequently studied on characterizing biofilm-forming bacterial communities. Different treatment methods like electropotential charge, ultrasonication, and copper coating of titanium condenser material may influence the microbial population over the surface of the titanium condensers. The present study aimed to catalog the primary colonizers and the effect of different treatment methods on the microbial community. CFU (1.7 × 109CFU/mL) and ATP count (< 5000 × 10-7 relative luminescence units) showed a minimal microbial population in copper-coated surface biofilm as compared with the other treatments. Live and dead cell result also showed consistency with colony count. The biofilm sample on the copper-coated surface showed an increased dead cell count and decreased live cells. In the metagenomic approach, the microbiome coverage was 10.06Mb in samples derived from copper-coated TCM than in other treated samples (electropotential charge-17.94Mb; ultrasonication-20.01Mb), including control (10.18Mb). Firmicutes preponderate the communities in the biofilm samples, and Proteobacteria stand next in the population in all the treated condenser materials. At the genus level, Lactobacillaceae and Azospirillaceae dominated the biofilm community. The metagenome data suggested that the attached community is different from those biofilm samples based on the environment that influences the bacterial community. The outcome of the present study depicts that copper coating was effective against biofouling and corrosion resistance of titanium condenser material for designing long-term durability.

Micromorphological and Chemical Characterization of Drimys winteri Leaf Surfaces: The Secondary Alcohols Forming Epicuticular Wax Crystals Are Accompanied by Alkanediol, Alkanetriol and Ketol Derivatives.

The cuticle is a hydrophobic coating of most aerial plant surfaces crucial for limiting non-stomatal water loss. Plant cuticles consist of the lipid polyester cutin and associated waxes with compositions varying widely between plant species and organs. Here, we aimed to provide a comparative analysis of the dark-glossy adaxial and pale-glaucous abaxial sides of Drimys winteri (Winteraceae) leaves. Scanning electron microscopy showed nanotubular wax crystals lining the entire abaxial side of the leaf (including stomatal pores), while the adaxial side had patches of mixed platelet/tubule crystals and smooth areas between them. Consecutive treatments for wax removal and cutin depolymerization revealed that the waxes were deposited on a cutin network with micron-scale cavities across the entire abaxial surface including the stomata pores, and on a microscopically smooth cutin surface on the adaxial side of the leaf. Gas chromatography coupled to mass spectrometry and flame ionization detection showed that the wax mixtures on both sides of the leaf were complex mixtures of very-long-chain compounds dominated by the secondary alcohol nonacosan-10-ol and alkanediols with one hydroxyl on C-10. It is therefore very likely that the characteristic tubular wax crystals of both leaf sides are formed by these alcohols and diols. Further secondary alcohols and alkanediols, as well as ketols and alkanetriols with one functional group on C-10, were identified based on mass spectral fragmentation patterns. The similarities between all these mid-chain-functionalized compounds suggest that they are derived from nonacosan-10-ol via regio-specific hydroxylation reactions, likely catalyzed by three P450-dependent monooxygenases with different regio-specificities.

Impacts of fertilization methods on Salvia miltiorrhiza quality and characteristics of the epiphytic microbial community.

Plant epiphytic microorganisms have established a unique symbiotic relationship with plants, which has a significant impact on their growth, immune defense, and environmental adaptation. However, the impact of fertilization methods on the epiphytic microbial community and their correlation with the yield and quality of medicinal plant was still unclear. In current study, we conducted a field fertilization experiment and analyzed the composition of epiphytic bacterial and fungal communities employing high throughput sequencing data in different organs (roots, stems, and leaves) of Salvia miltiorrhiza, as well as their correlation with plant growth. The results showed that fertilization significantly affected the active ingredients and hormone content, soil physicochemical properties, and the composition of epiphytic microbial communities. After fertilization, the plant surface was enriched with a core microbial community mainly composed of bacteria from Firmicutes, Proteobacteria, and Actinobacteria, as well as fungi from Zygomycota and Ascomycota. Additionally, plant growth hormones were the principal factors leading to alterations in the epiphytic microbial community of S. miltiorrhiza. Thus, the most effective method of fertilization involved the application of base fertilizer in combination with foliar fertilizer. This study provides a new perspective for studying the correlation between microbial community function and the quality of S. miltiorrhiza, and also provides a theoretical basis for the cultivation and sustainable development of high-quality medicinal plants.

Towards Sustainable Agriculture: Integrating Agronomic Practices, Environmental Physiology and Plant Nutrition

Sustainable agriculture aims to meet the growing global demand for food without compromising environmental integrity. This review paper explores the integration of agronomic practices, environmental physiology, and plant nutrition as pathways toward sustainable crop production. Intensive agricultural practices have led to significant problems such as soil degradation, loss of biodiversity, and environmental pollution. Recent advancements in plant physiology have enhanced our understanding of plant growth and response to biotic and abiotic stresses. Optimizing crop production in a sustainable manner depends on insights into key processes like photosynthesis, water use efficiency, and nutrient uptake. This review discusses the role of plant growth-promoting microorganisms (PGPMs) as biofertilizers, providing an alternative to harmful agrochemicals. PGPMs can improve soil health and promote plant growth when applied to soil, seeds, or plant surfaces, reducing reliance on synthetic fertilizers and pesticides. Additionally, nanotechnology in agriculture is examined, illustrating how nanomaterials (NMs) and nano-based fertilizers can enhance nutrient absorption and increase crop yields. Beyond these scientific approaches, there is an urgent need to implement novel agricultural practices that support sustainability. The world population is growing at a disquieting rate, placing tremendous pressure on natural resources. This threatens future generations' access to nutritious food and clean air. Innovative approaches like climate-smart agriculture, organic farming, biodynamic agriculture, sustainable intensification, and regenerative agriculture, along with practices such as integrated farming systems, precision agriculture, integrated nutrient management, and integrated pest management, have proven to safeguard agricultural sustainability. By integrating these innovative approaches and practices, it is possible to meet the increasing demands for food while preserving the environment.

Phylloplane Yeasts on Cocoa and Their Abilities to Inhibit Phytophthora palmivora In Vitro

Cocoa is an economically valuable plantation commodity, but its cultivation often faces a significant challenge, which is caused by the Phytophthora palmivora. Phylloplane yeast has an important role in protecting plant surfaces from pathogen infection. The aim of the study was to assess the diversity of phylloplane yeasts found on cocoa fruits, and determine them as biological control agents for P. palmivora. The metode include isolating yeasts from young, old and rotten cocoa pods and testing them as antagonists against P. palmivora. The findings of this study yielded eight yeast isolates that were significant in inhibiting the growth of P. palmivora. These isolates spanned across six genera, including Debaryomyces sp., Metschnikowia sp., Zygosaccharomyces sp., Candida sp., Wickerhamomyces sp., and Cryptococcus sp. Candida sp.2 and Wickerhamomyces sp. as particularly promising species species that had a consistently resistant level of inhibitory effect, achieved percentage inhibition of 36.26% (10.8 mm) and 34.44% (9.6 mm), respectively.

Acetyl-CoA Carboxylase1 Influences ECERIFERUM2 Activity to Mediate the Synthesis of Very-Long-Chain Fatty Acid Past C28.

Cuticular wax is a protective layer on the aerial surfaces of land plants. In Arabidopsis (Arabidopsis thaliana), cuticular wax is mainly constituted of compounds derived from very-long-chain fatty acids (VLCFAs) with chain lengths longer than C28. CER2-LIKE (ECERIFERUM2-LIKE) proteins interact with CER6/KCS6 (ECERIFERUM6/β-Ketoacyl-CoA Synthase6), the key enzyme of the fatty acid elongase complex, to modify its substrate specificity for VLCFA elongation past C28. However, the molecular regulatory mechanism of CER2-LIKE proteins remains unclear. Arabidopsis eceriferum19 (cer19) mutants display wax-deficient stems caused by loss of waxes longer than C28, indicating that CER19 may participate in the CER2-LIKE-mediated VLCFA elongation past C28. Using positional cloning and genetic complementation, we showed that CER19 encodes Acetyl-CoA Carboxylase1 (ACC1), which catalyzes the synthesis of malonyl-CoA, the essential substrate for the CER6/KCS6-mediated condensation reaction in VLCFA synthesis. We demonstrated that ACC1 physically interacts with CER2-LIKE proteins via split-ubiquitin yeast two-hybrid (SUY2H) and firefly luciferase complementation imaging (LCI) analysis. Additionally, heterologous expression in yeast and genetic analysis in Arabidopsis revealed that ACC1 affects CER2 activity to influence VLCFA elongation past C28. These findings imply that CER2-LIKE proteins might function as a link between ACC1 and CER6/KCS6 and subsequently enhance CER6/KCS6 binding to malonyl-CoA for further utilization in VLCFA elongation past C28. This information deepens our understanding of the complex mechanism of cuticular wax biosynthesis.

Nanoinert diatomaceous and emamectin benzoate: Enhancing wheat protection against fall armyworms for sustainable management

The fall armyworm (FAW), Spodoptera frugiperda, poses a significant global threat to agriculture due to its wide geographic range, high reproductive rate, and ability to thrive in diverse climates and habitats. A field study was conducted to evaluate the potential of nano-inert dust particles, specifically nano-diatomaceous earth (N-DE) and nano-potassium silicate (N-K2SiO3), individually and in combination with emamectin benzoate, to manage FAW larvae infesting wheat plants (Triticum aestivum L.). The field experiments occurred during the winter seasons of 2021 and 2022 in Qaha, Qalubya Governorate, Egypt. Results revealed that the combined application of N-DE and N-K2SiO3 with emamectin benzoate outperformed other treatments, achieving larval reduction rates of 93.33 % and 86.66 % in 2021 and 89.31 % and 86.90 % in 2022 after a 10-day interval from the second spray. Moreover, supplementation with N-DE and N-K2SiO3 enhanced plant height, tiller count, leaf number, foaming, suspensibility, surface tension, and pH compared to using emamectin benzoate alone. Additionally, foliar application of N-K2SiO3 and N-DE increased total flavonoids (4.23 and 3.24 mg CE/g) and total phenolic compounds (1.35 and 1.12 mg/g F. Wt.), as well as plant silicate content, indicating improved plant health and pest resistance. This study underscores the efficacy of N-DE and N-K2SiO3 in reducing FAW infestations and enhancing plant growth and defense mechanisms.

Project ChemicalBlooms: Collaborating with citizen scientists to survey the chemical diversity and phylogenetic distribution of plant epicuticular wax blooms.

Plants use chemistry to overcome diverse challenges. A particularly striking chemical trait that some plants possess is the ability to synthesize massive amounts of epicuticular wax that accumulates on the plant's surfaces as a white coating visible to the naked eye. The ability to synthesize basic wax molecules appears to be shared among virtually all land plants, and our knowledge of ubiquitous wax compound synthesis is reasonably advanced. However, the ability to synthesize thick layers of visible epicuticular crystals ("wax blooms") is restricted to specific lineages, and our knowledge of how wax blooms differ from ubiquitous wax layers is less developed. Here, we recruited the help of citizen scientists and middle school students to survey the wax bloom chemistry of 78 species spanning dicot, monocot, and gymnosperm lineages. Using gas chromatography-mass spectrometry, we found that the major wax classes reported from bulk wax mixtures can be present in wax bloom crystals, with fatty acids, fatty alcohols, and alkanes being present in many species' bloom crystals. In contrast, other compounds including aldehydes, ketones, secondary alcohols, and triterpenoids were present in only a few species' wax bloom crystals. By mapping the 78 wax bloom chemical profiles onto a phylogeny and using phylogenetic comparative analyses, we found that secondary alcohol and triterpenoid-rich wax blooms were present in lineage-specific patterns that would not be expected to arise by chance. That finding is consistent with reports that secondary alcohol biosynthesis enzymes are found only in certain lineages but was a surprise for triterpenoids, which are intracellular components in virtually all plant lineages. Thus, our data suggest that a lineage-specific mechanism other than biosynthesis exists that enables select species to generate triterpenoid-rich surface wax crystals. Overall, our study outlines a general mode in which research scientists can collaborate with citizen scientists as well as middle and high school classrooms not only to enhance data collection and generate testable hypotheses but also to directly involve classrooms in the scientific process and inspire future STEM workers.

Plant surface as a sensory system in allelopathic relations: 2. Cholinesterase

Plant surface as a sensory system in allelopathic relations: 2. Cholinesterase

A REVIEW OF MICROBIAL SAFETY AND BACTERIAL BIOFILM FORMATION OF FRESH VEGETABLES

Fresh vegetables are usually eaten raw and do not receive any treatment to ensure adequate removal or inactivation of harmful microorganisms prior to eating. Food-borne disease associated with the consumption of fresh vegetables appear to be rising. Farming practices, post-harvest processing and condition of storage have effect on microbial communities for fresh vegetables. Salmonella spp, E. coli, Staphylococcus aureus and Listeria are common foodborne pathogenic bacteria associated with the consumption of fresh vegetables. Biofilm, is characterized as by population of bacteria firmly adhered to a surface and these communities provide longer survival and resistance to adverse conditions such as presence of disinfectants and antibiotics. Attachment of bacteria to plant surface or biofilm formation is the initial step towards the contamination in fresh vegetable. This review emphasizes on pre- and post- harvest contaminant in the safety of fresh vegetables, bacterial biofilm formation and food safety strategies to reduce risk and the foodborne disease outbreaks linked to fresh produce

Characterization of the closely related Arabidopsis thaliana β-ketoacyl-CoA synthases KCS3, KCS12 and KCS19.

The cuticle, consisting of cuticular wax and cutin, is a lipid membrane that seals the plant surface against environmental stress. β-Ketoacyl-CoA synthases (KCSs) are condensing enzymes catalyzing crucial reactions elongating hydrocarbon chains into precursors for various cuticular wax components. Although many KCS genes were well characterized in various species, the functions of the closely related Arabidopsis KCS3, KCS12, KCS19 enzymes remained unclear. Here, we found KCS3 preferentially expressed in growing organs, especially in guard cells. kcs3 mutants and kcs3kcs12 double mutants displayed sepal fusion phenotypes, suggesting defects in cuticle formation. The mutants had decreased amounts of wax components with relatively short hydrocarbon chains in the developing organs but increased levels of wax compounds in mature organs. In contrast, kcs19 mutants showed seed fusion phenotypes and altered chain length distributions in seed suberin. Taken together, our results show that KCS12 and KCS3 share redundant functions in flower development, while KCS19 is involved in seed coat formation. All three condensing enzymes are involved in the elongation of C>18 hydrocarbon chains in young, actively expanding tissues.

Assembly and succession of the phyllosphere microbiome and nutrient-cycling genes during plant community development in a glacier foreland

The phyllosphere, particularly the leaf surface of plants, harbors a diverse range of microbiomes that play a vital role in the functioning of terrestrial ecosystems. However, our understanding of microbial successions and their impact on functional genes during plant community development is limited. In this study, considering core and satellite microbial taxa, we characterized the phyllosphere microbiome and functional genes in various microhabitats (i.e., leaf litter, moss and plant leaves) across the succession of a plant community in a low-altitude glacier foreland. Our findings indicate that phyllosphere microbiomes and associated ecosystem stability increase during the succession of the plant community. The abundance of core taxa increased with plant community succession and was primarily governed by deterministic processes. In contrast, satellite taxa abundance decreased during plant community succession and was mainly governed by stochastic processes. The abundance of microbial functional genes (such as C, N, and P hydrolysis and fixation) in plant leaves generally increased during the plant community succession. However, in leaf litter and moss leaves, only a subset of functional genes (e.g., C fixation and degradation, and P mineralization) showed a tendency to increase with plant community succession. Ultimately, the community of both core and satellite taxa collaboratively influenced the characteristics of phyllosphere nutrient-cycling genes, leading to the diverse profiles and fluctuating abundance of various functional genes during plant community succession. These findings offer valuable insights into the phyllosphere microbiome and plant–microbe interactions during plant community development, advancing our understanding of the succession and functional significance of the phyllosphere microbial community.