Pine Research Articles

Optimization and Stability Assessment of Monochamus alternatus Antimicrobial Peptide MaltAtt-1 in Komagataella phaffii GS115 for the Control of Pine Wood Nematode.

MaltAtt-1 is an antimicrobial peptide isolated from Monochamus alternatus with nematocidal activity against pine wood nematode. In this study, a eukaryotic expression system based on Komagataella phaffii GS115 was established, and its secretory expression of MaltAtt-1 was realized. The basic properties and secondary and tertiary structures of the antimicrobial peptide MaltAtt-1 were identified by bioinformatics analysis. MaltAtt-1 is a hydrophilic stable protein, mainly composed of an α-helix (Hh), β-folds (Ee), and irregular curls (Cc). The optimal fermentation conditions for MaltAtt-1 were determined by a single-factor test and the Box-Behnken response surface method, including an induction time of 72 h, induction temperature of 30 °C, culture medium of pH 7.6, methanol volume fraction of 2.0%, and an initial glycerol concentration of 1%. The stability of MaltAtt-1 indicated its resistant to UV irradiation and repeated freezing and thawing, but the antibacterial activity decreased significantly under the influence of high temperature and a strong acid and base, and it decreased significantly to 1.1 cm and 0.83 cm at pH 2.0 and pH 10.0, respectively. The corrected mortality of B. xylophilus achieved 71.94% in 3 h at a concentration of 300 mg·L-1 MaltAtt-1 exposure. The results provide a theoretical basis for the antimicrobial peptide MaltAtt-1 to become a new green and efficient nematicide.

Biochar/Biopolymer Composites for Potential In Situ Groundwater Remediation.

This study explores the use of pine wood biochar (BC) waste gasified at 950 °C as fillers in polymer matrices to create BC@biopolymer composites with perspectives in groundwater remediation. Four biochar samples underwent different sieving and grinding processes and were extensively characterized via UV-Vis, FTIR, and FESEM-EDS, highlighting the fact that that BCs are essentially graphitic in nature with a sponge-like morphology. The grinding process influences the particle size, reducing the specific surface area by about 30% (evaluated by BET). The adsorption performances of raw BC were validated via an adsorption isotherm using trichloroethylene (TCE) as a model contaminant. A selected BC sample was used to produce hydrophilic, stable polymer composites with chitosan (CS), alginate (ALG), potato starch (PST), and sodium carboxymethylcellulose (CMC) via a simple blending approach. Pilot sedimentation tests over 7 days in water identified BC@PST and BC@CMC as the most stable suspensions due to a combination of both hydrogen bonds and physical entrapment, as studied by FTIR. BC@CMC showed optimal distribution and retention properties without clogging in breakthrough tests. The study concludes that biopolymer-based biochar composites with improved stability in aqueous environments hold significant promise for addressing various groundwater pollution challenges.

Ancient Pines Could Reveal the Heat of Thousands of Past Seasons

A novel 3D CT scan approach unlocks temperature records preserved in the gnarled wood of bristlecone pines.

Modelling Climate Effects on Site Productivity and Developing Site Index Conversion Equations for Jack Pine and Trembling Aspen Mixed Stands

Forest site productivity estimates are crucial for making informed forest resource management decisions. These estimates are valuable both for the tree species currently growing in the stands and for those being considered for future stands. Current models are generally designed for pure stands and do not account for the influence of climate on tree growth. Consequently, site index (SI) conversion equations were developed specifically for jack pine (Pinus banksiana Lamb.) and trembling aspen (Populus tremuloides Michx.) trees grown in naturally originated mixed stands. This work involved sampling 186 trees (93 of each species) from 31 even-aged mixed stands (3 trees per species per site) across Ontario, Canada. Stem analysis data from these trees were utilized to develop stand height growth models by incorporating climate variables for each species. The models were developed using a mixed effects modelling approach. The SI of one species was correlated with that of the other species and climate variables to establish SI conversion equations. The effect of climate on site productivity was evaluated by projecting stand heights at four geographic locations (east, center, west, and far west) in Ontario from 2022 to 2100 using the derived stand height growth models. Height projections were made under three emissions scenarios reflecting varying levels of radiative forcing by the end of the century (2.6, 4.5, and 8.5 watts m−2). Climate effects were observed to vary across different regions, with the least and most pronounced effects noted in the central and far western areas, respectively, for jack pine, while effects were relatively similar across all locations for trembling aspen. Stand heights and SIs of jack pine and trembling aspen trees grown in naturally originated mixed stands can be estimated using the height growth models developed here. Similarly, SI conversion equations enable the estimation of the SI for one species based on the SI of another species and environmental variables.

New and Interesting Pine-Associated Hyphomycetes from China.

Pine trees play a crucial role in the forests of Sichuan Province, boasting rich species diversity and a lengthy evolutionary history. However, research and investigation on fungi associated with pine trees are insufficient. This study investigated the diversity of hyphomycetes fungi associated with pine trees in Sichuan Province, China. During the survey, we collected five specimens of hyphomycetes from branches and bark of species of Pinus. Five barcodes were selected for study and sequenced, including ITS, SSU, LSU, TEF1, and RPB2. Morphological examination and multi-locus phylogenetic analyses revealed three new species, viz. Catenulostroma pini sp. nov. within Teratosphaeriaceae, Kirschsteiniothelia longisporum sp. nov. within Kirschsteiniotheliaceae, Sporidesmiella sichuanensis sp. nov. within Junewangiaceae, and two known species, Paradictyoarthrinium diffractum and P. hydei within Paradictyoarthriniaceae, which are the new host records from Pinus species. Catenulostroma pini, distinguished from other species in the genus by its unique morphology, has three conidial morphologies: small terminal helicoconidia, scolecoconidia with many septa, and phragmoconidia conidia. Kirschsteiniothelia longisporum has longer spores when compared to the other species in the genus. According to phylogenetic analysis, Sporidesmiella sichuanensis formed an independent clade sister to S. aquatica and S. juncicola, distinguished by differences in conidial size.

Effect of different boundary conditions on the combustion properties and fire characteristics of typical woods

To provide guidance on the bioenergy potential of wood and its fire spread numerical simulation, insights into the combustion properties and fire characteristics of one hardwood (sassafras) and two softwoods (pine and fir) were investigated. The effect of different boundary conditions are focused. The condensed phase decomposition in thermogravimetric analysis indicated that the main degradation processes for all wood combustion could be divided into two stages, and the corresponding demarcation point of conversion rate is 0.4 and 0.35 for hardwood and softwood, respectively. Three specific regions could further be established based on the activation energies variations in Stage Ⅰ. The governing reaction mechanism of sassafras wood is determined to be the diffusion model connect with order-based model, while the reaction mechanism of softwoods (pine and fir) can be considered as the reaction order (1st to three-halves) type followed by diffusion model. The gas phase flaming in FPA combustion experiments suggest that fir and pine wood have a faster charring rate and produce less CO and CO2 during pyrolysis and combustion. Sassafras requires more time to be ignited owing to its high density, which causes higher thermal inertia therefore decelerating the temperature increase on the sample surface. In addition, the dense structure of sassafras leads to an early appearance of the second HRR and MLR peaks. As hardwood has a higher density than softwood, the thermal insulation in hardwood delays char cracking on sassafras wood surface and enhances the duration between ignition and flameout. Such findings should provide guidance for wood combustion modeling and flame spread simulation in future works.

Growth and productivity of stevia variety Cibodas Manis 3 (Stevia rebaudiana) in 40 days planting with agroforestry

Abstract. Choeriah MN, Wijayanto N, Batubara I. 2024. Growth and productivity of stevia variety Cibodas Manis 3 (Stevia rebaudiana) in 40 days planting with agroforestry. Biodiversitas 25: 3277-3283. Stevia (Stevia rebaudiana Bertoni.) is a shrub plant that can be used as a substitute for sugar cane and has the potential to be cultivated in agroforestry ways. This study aims to analyze the growth and productivity of stevia in agroforestry systems compared to monocultures. Stevia was planted in 2 types of land, namely agroforestry and monoculture. The research location's soil and area's climatic conditions were observed stevia agroforestry was grown under pine, eucalyptus, and coffee trees. During stevia planting, the height was measured. Stevia was harvested 40 days after planting, and leaf area, number of leaves, leaf weight, and harvest productivity were measured. In addition, chlorophyll and stevioside yields were analyzed using UV VIS and LC-MS/MS spectrometry. Stevia in agroforestry land had higher chlorophyll and stevioside content than monoculture, although not as good as stevia in monoculture, which had higher height, number of leaves, leaf area, wet weight, dry weight, and productivity compared to agroforestry. The total stevioside produced from agroforestry land was 1.63 kg/ha, while it was 2.19 kg/ha from monoculture land. Stevia in agroforestry land also has a higher secondary metabolite content than in monoculture. This is related to the growing conditions that stress stevia. Pearson correlation test results also show a relationship between the amount of chlorophyll and the stevioside content in stevia plants.

Phylogenetic Insights Reveal New Taxa in Thyridariaceae and Massarinaceae.

Pleosporales is a highly diverse (and the largest) order in Dothideomycetes, and it is widespread in decaying plants in various environments around the world. During a survey of fungal diversity in Sichuan Province, China, specimens of hyphomycetous and Thyridaria-like fungi were collected from dead branches of pine trees and cherry trees. These taxa were initially identified as members of Massarinaceae and Thyridariaceae through morphological examination. Phylogenetic analyses of the Thyridariaceae, combining ITS, SSU, LSU, RPB2, and TEF1 sequence data, indicated a distinct clade sister to Pseudothyridariella and Thyridariella, distinct from any genus in the family. Thus, a new genus, Vaginospora, is proposed to accommodate the type species Vaginospora sichuanensis, which is characterized by semi-immersed globose to oblong ascomata with an ostiolar neck, cylindrical to clavate asci with an ocular chamber, and hyaline to dark brown, fusiform, 3-5-transversely septate ascospores with an inconspicuous mucilaginous sheath. Based on the morphological comparisons and multi-locus phylogenetic analyses (ITS, SSU, LSU, RPB2, and TEF1) of the Massarinaceae, we have identified three collections belonging to the genus Helminthosporium, leading us to propose H. filamentosa sp. nov., H. pini sp. nov., and H. velutinum as a new host record. According to Phylogenetic analysis, H. pini formed an independent clade sister to H. austriacum and H. yunnanense, and H. filamentosa represents the closest sister clade to H. quercinum. Helminthosporium pini is distinct from H. austriacum by the shorter conidiophores and H. yunnanense by the longer and wider conidia. The H. filamentosa differs from H. quercinum in having longer conidiophores and smaller conidia. This study extends our understanding of diversity within Thyridariaceae and Helminthosporium. Our findings underscore the rich biodiversity and potential for discovering novel fungal taxa within these groups.

Research on Bursapherenchus Xylophophilus Disease Recognition Based on HSV Space

Abstract This study aims at the shortcomings of traditional artificial ground detection methods for Bursapherenchus xylophophilus disease and applies HSV(Hue-Saturation-Value) color model to realize automatic identification of Bursapherenchus xylophophilus disease and determine its degree of disaster.The entire process is divided into forest data collection, image processing, nematode disease identification and grade determination.The study conducted repeated comparisons and adjusted HSV threshold tests to obtain the HSV threshold with optimal recognition results, and then identify Bursaphelenchus xylophophilus disease and calculate its disease severity. This method is simple to operate and has good identification effects. It can also effectively improve the accuracy and efficiency of pine wood nematode diagnosis. It can be widely used in the field of agriculture and forestry to help better complete disease detection and carry out prevention and control measures more accurately, thereby effectively Protect forest natural resources and improve forestry production efficiency.

Determining the Extent of damage in Snapped Southern Yellow Pine Trees with Acoustic Testing

Abstract Salvage of downed timber following a windstorm allows recovery of management options for landowners and wood products for industry. Because wood volumes are large and logging, transportation, mill storage, and processing capacities are limited, avoiding the selection of logs with damage can conserve those resources. Visual damage indicators are typically used to select and differentiate products, but damaged logs are still delivered to mills. Following experimental tree winching in 2021 and a tornado in 2023, we assessed lengths of broken trees with a Fakopp microsecond timer. Using a recognized defect limit (10% deviation from the maximum acoustic velocity) about 80 percent of volume in broken tops could be recovered. Standard rules of thumb applied from the end of visible damage resulted in the recovery of about 50 percent of the volume with a relatively low defect rate (<10%). Applying bucking rules developed from acoustic measurements based on distance from snap might be easier to apply and increase recovery rates to over 70 percent of broken top volume.

The Thursina Creative Islamic Boarding School Landscape Design with an Ecological Approach

Abstract The Thursina Sukamakmur Creative Islamic Boarding School is a boarding school under the State Electricity Company Baitul Mal Foundation (YBM-PLN) ’s management in Sukamakmur Village, Bogor Regency. Education at this Islamic boarding school has the theme of agriculture, where students learn about rice farming and goat and chicken farming. This Islamic boarding school has an area of 16,610 m2 with sloping to steep terrain (more than 25%) and consists of Islamic boarding school buildings, livestock areas, and rain-fed rice fields. The pesantren is surrounded by rain-fed rice fields and is located on a hillside, so it has problems in hydrology when it rains, and strong winds blow from the hill towards the valley. Therefore, a master plan was prepared using an ecological approach, in which the solutions offered minimize artificial landscape elements and optimize the function of vegetation as a wind barrier. The wind barrier is made of pine trees with three layers of thickness. With this ecological approach, it is hoped that the management of the building and environment of the Thursina Creative Islamic Boarding School can be sustainable.

Transcriptomic Identification of Potential C2H2 Zinc Finger Protein Transcription Factors in Pinus massoniana in Response to Biotic and Abiotic Stresses.

Biotic and abiotic stresses have already seriously restricted the growth and development of Pinus massoniana, thereby influencing the quality and yield of its wood and turpentine. Recent studies have shown that C2H2 zinc finger protein transcription factors play an important role in biotic and abiotic stress response. However, the members and expression patterns of C2H2 TFs in response to stresses in P. massoniana have not been performed. In this paper, 57 C2H2 zinc finger proteins of P. massoniana were identified and divided into five subgroups according to a phylogenetic analysis. In addition, six Q-type PmC2H2-ZFPs containing the plant-specific motif 'QALGGH' were selected for further study under different stresses. The findings demonstrated that PmC2H2-ZFPs exhibit responsiveness towards various abiotic stresses, including drought, NaCl, ABA, PEG, H2O2, etc., as well as biotic stress caused by the pine wood nematode. In addition, PmC2H2-4 and PmC2H2-20 were nuclear localization proteins, and PmC2H2-20 was a transcriptional activator. PmC2H2-20 was selected as a potential transcriptional regulator in response to various stresses in P. massoniana. These findings laid a foundation for further study on the role of PmC2H2-ZFPs in stress tolerance.

Eco‐friendly flame‐retardant based on sap from banana plant pseudostems

AbstractSociety's need for safe flame‐retardant technologies in passive fire protection is undeniable. To address this concern, this paper presents an experimental investigation of the fire‐retardant properties of slash pine wood treated with banana plant pseudostem sap, obtained from a cultivated banana plant variety widely grown in Brazil. The natural sap extract was characterized through X‐Ray Fluorescence spectrometry and Fourier Transform Infrared Spectroscopy techniques, revealing the presence of key components, including water, potassium chloride, sodium chloride, sodium silicate, calcium phosphate, sodium phosphate, lignin and tannins. The authors explored different treatment parameters, including various sap impregnation times, number of impregnations and use of natural versus various levels of concentrated sap. First, a horizontal burning test, similar test to UL 94 HB, was used to obtain an initial assessment of the suitability of sap as a flame retardant for slash pine wood. Subsequently, the Mass Loss Calorimeter equipment with thermopile attachment described in ISO 13927:2015 was used to measure various heat release rate parameters. The findings suggest that reducing the water content in sap and increasing the number of repeat treatments results in a more effective treatment for slash pine wood. More specifically, the results indicate that the most efficient treatment involves three impregnations with high‐concentration (1/10 volume reduction) sap. Future work to improve the efficacy of the concentrated sap impregnation process could explore the use of pressure treatment instead of soaking.

Experimental and numerical analysis of natural fillers loaded and E-glass reinforced epoxy sandwich composites

Natural fibers play a crucial role in sandwich composites due to their biodegradability, ease of manufacturing, and ability to reduce pollution. The research aims to develop new biodegradable polymer composites using pine tree leaves (PTL) fillers loaded with epoxy through hand layup technique with different wt. % of PTL fillers. The molded composites were characterized to analyze the crystal size and plane orientations, surface morphology, thermal resistance, and presence of elemental compositions in the PTL filler-loaded epoxy composites through X-ray diffraction (XRD), Field emission scanning electron microscope (FESEM), Energy dispersive analysis (EDX), Differential scanning calorimetry (DSC), and Thermogravimetric analysis (TGA). The 40 wt % of PTL epoxy composites showed a maximum tensile strength of 32 ± 0.5 MPa, a compressive strength of 15 ± 0.5 MPa, a flexural strength of 55 ± 0.5 MPa, and a Shore D hardness of 73 ± 0.5 SHN. The mechanical strength of 40 wt% PTL fillers loaded epoxy composite was enhanced by adding a single and double layer of E-glass fiber on the bottom and top of the PTL fillers loaded epoxy composite, achieving a maximum tensile strength of 76 ± 0.5 MPa. The 40 wt% PTL fillers loaded double E-glass fiber on the bottom and top of the PTL fillers loaded epoxy sandwich composite attained the maximum tensile strength of 156 ± 0.5 MPa, compressive strength of 29 ± 0.5 MPa, flexural strength of 220 ± 0.5 MPa, and Shore D hardness of 79 ± 0.5 SHN. The PTL fillers loaded and reinforced double E-glass fiber epoxy sandwich composite would be used in low-strength structural applications.

Interspecies Interactions in Dual Cultures of Selected Fungi Species and Their Influence on the Decomposition of Scots Pine and Norway Spruce Wood Substrates

Interspecies Interactions in Dual Cultures of Selected Fungi Species and Their Influence on the Decomposition of Scots Pine and Norway Spruce Wood Substrates

Tannin gradation of living pine (Pinus merkusii) and mahogany (Swietenia mahagoni) bark

ABSTRACT This study aims to assess the tannin gradation extracted from the bark of pine and mahogany tree. Tannin content was analyzed using the permanganometric titration method and was identified using gas chromatography-mass spectrometry. The results show that pine and mahogany bark consist of three and four layers, respectively. The secondary phloem of pine locates in the deepest layer, while its periderm locates in the first and second outermost layers. The secondary phloem of mahogany locates in the first and second innermost layers, while its periderm locates in the first and second outermost layers. It is found that higher in vertical position of bark on the tree, the smaller in amount of tannin could be extracted, both on pine and mahogany tree. However, the outer layer of both pine and mahogany barks provides lower tannin content. It could be suggested from this study that tannin from pine bark should be extracted from the layer near the cambium, meanwhile tannin from mahogany bark should be extracted from the middle layer of the bark. Thus, large amounts of tannin from living tree bark could be obtained without damaging the tree's physiology or inhibiting tree growth.

Root-soil-microbiome interaction in the rhizosphere of Masson pine (Pinus massoniana) under different levels of heavy metal pollution

Heavy metal pollution of the soil affects the environment and human health. Masson pine is a good candidate for phytoremediation of heavy metal in mining areas. Microorganisms in the rhizosphere can help with the accumulation of heavy metal in host plants. However, studies on its rhizosphere bacterial communities under heavy metal pollution are still limited. Therefore, in this study, the chemical and bacterial characteristics of Masson pine rhizosphere under four different levels of heavy metal pollution were investigated using 16 S rRNA gene sequencing, soil chemistry and analysis of plant enzyme activities. The results showed that soil heavy metal content, plant oxidative stress and microbial diversity damage were lower the farther they were from the mine dump. The co-occurrence network relationship of slightly polluted soils (C1 and C2) was more complicated than that of highly polluted soils (C3 and C4). Relative abundance analysis indicated Sphingomonas and Pseudolabrys were more abundant in slightly polluted soils (C1 and C2), while Gaiella and Haliangium were more abundant in highly polluted soils (C3 and C4). LEfSe analysis indicated Burkholderiaceae, Xanthobacteraceae, Gemmatimonadaceae, Gaiellaceae were significantly enriched in C1 to C4 site, respectively. Mantel analysis showed that available cadmium (Cd) contents of soil was the most important factor influencing the bacterial community assembly. Correlation analysis showed that eight bacterial genus were significantly positively associated with soil available Cd content. To the best of our knowledge, this is the first study to investigate the rhizospheric bacterial community of Masson pine trees under different degrees of heavy metal contamination, which lays the foundation for beneficial bacteria-based phytoremediation using Masson pines in the future.

Tree-growth synchrony index, an effective indicator of historical climatic extremes

BackgroundTree rings play an important role in reconstructing past climate. Growth differences among individual trees due to microclimatic conditions and local disturbances are averaged in developing tree-ring chronologies. Here, we addressed the problem of averaging by investigating growth synchrony in individual trees. We used tree-ring data of 1046 juniper trees from 32 sites on the Tibetan Plateau and 538 pine trees from 20 sites in the subtropical region of eastern China and calculated the tree-growth synchrony index (TGS).ResultsOur results showed that both the TGS index and tree-ring index could be indicators of interannual variation of climatic factors. The TGS index identified 20% more climatic extremes than tree-ring index over the last 50 years that high synchrony indicates extreme climate forcing in controlling forest growth.ConclusionsThe TGS index can identify extreme climatic events effectively than tree-ring index. This study provides a novel perspective for climate reconstruction, especially in the realm of tree growth response to extreme climate. Our findings contribute to understanding of the spatiotemporal dynamics and the causes of historical climate extremes and provide guidance for protecting trees from climate extremes in the future.

Estimating Litter Production Amount and Quality for Eldar Pine and Umbraculifera Elm Trees in the Historic City of Yazd

Estimating Litter Production Amount and Quality for Eldar Pine and Umbraculifera Elm Trees in the Historic City of Yazd

An Italian case study of life cycle assessment for a drinking water dispenser

The goal of this article is the comparison of global warming potential, estimated according to IPCC 2013 methodology, between bottled water and a drinking water dispenser made of pine wood. The functional unit is 1 L of water. Two cases are considered: in the first case is considered 1 L of refrigerated water supplied by a water dispenser, in the second case, it is also considered how users come back home with their water. The global warming potential for bottled water packed in polyethylene terephthalate is taken by literature, its average value is equal to 0.16 kg CO2 eq./L. In the first case, the water dispenser has a global warming potential value equal to 6.89 × 10−2 kg CO2 eq./L, the percentage difference between bottled water and water dispenser is about 43% in 100 years. In the end, a comparison of vehicles used by users to come back home is performed. The comparison shows that the use of bikes has a lower impact than cars.