Photocatalytic Dye Degradation Research Articles

Correction: One-step synthesis of CuO/MCM-41 nanocomposites and their application in photocatalytic degradation of dyes

Correction: One-step synthesis of CuO/MCM-41 nanocomposites and their application in photocatalytic degradation of dyes

Characterization and applications of iron oxide nanoparticles synthesized from Phyllanthus emblica fruit extract

Nanotechnology is a treasure trove of diversified themes which are endowed with broad applications. Herein, iron oxide (Fe2O3) nanoparticles were synthesized using Phyllanthus emblica aqueous fruit extract. The UV-Visible spectrum exhibited a surface plasmon resonance peak at 295nm. Fourier Transform Infrared Spectroscopy provided insight into the functional groups responsible for capping. X-ray diffraction analysis authenticated the crystalline nature of nanoparticles, while energy dispersive X-ray spectroscopy divulged that iron and oxygen comprised 54% of the nanoparticles’ weight. Scanning electron microscopy established irregular morphology and agglomeration of nanoparticles. The Fe2O3 nanoparticles validated potent antimicrobial activity against 11 bacterial and 1 fungal isolates. The biggest zone of inhibition (23mm) was measured against S. enterica, whereas the smallest zone of inhibition (12mm) was documented against C. albicans and E. coli. The values for minimum inhibitory concentration ranged between 10 and 15μg/ml for all microbes. Nevertheless, no synergy was exhibited by the nanoparticles with any of the selected antibiotics (Fractional Inhibitory Concentration Index > 1). The photocatalytic dye degradation capability of Fe2O3 nanoparticles was assessed and the observations implied a significant increase in degradation of methyl red although, not of methylene blue. Furthermore, the nanoparticles were in possession of substantial antioxidant (34–38%) and anti-inflammatory (31–38%) capacities. Consequent upon the robust activities of P. emblica-mediated nanoparticles, these can be scrutinized for biomedical and environmental implementations in future.

Facile synthesis of rGO/ZnCo2O4 nanocomposite for enhanced photocatalytic dye degradation of crystal violet dye solution

The rGO/ZnCo2O4 nanocomposite (NCs) was synthesized using a hydrothermal method. The crystallite size, morphology, and optical properties of rGO, ZnCo2O4, and the rGO/ZnCo2O4 nanocomposite were extensively characterized using TG/DTA, FT-IR, UV-DRS, XRD, SEM with EDAX, and TEM techniques. The synthesized rGO/ZnCo2O4 NCs were crystalline with a cubic spinel structure and an average crystallite size of 19 nm, as confirmed by XRD. The optical bandgaps of pure ZnCo2O4 and the rGO/ZnCo2O4 nanocomposite were estimated to be 2.3 eV and 1.8 eV, respectively. The crystal violet (CV) dye was efficiently removed from an aqueous solution by photocatalytic degradation under visible light and sunlight irradiation in the presence of pure ZnCo2O4 and the rGO/ZnCo2O4 nanocomposite. The degradation results revealed that nearly 99.9 % of dye degradation was achieved with the rGO/ZnCo2O4 nanocomposite compared to pure ZnCo2O4 nanoparticles in 60 minutes. Hence, the rGO/ZnCo2O4 nanocomposite can be considered a promising and efficient photocatalyst for the degradation of crystal violet dye. The key highlight of this work is the low-cost, disruptive engineering strategy for synthesizing nanocatalysts for multifaceted applications.

Intrinsically microporous polyimide-based metal-free catalysts for round-the-clock photodegradation of organic pollutants

Photocatalytic degradation of organic pollutants is an essential technology for various environmental applications. However, the effectiveness of most photocatalysts is restricted to light. Herein, we report metal-free catalysts derived from intrinsically microporous polyimide for persistence in photocatalytic degradation of dyes. We systematically investigate the effect of porosity and functionality on photocatalytic efficiency. Both the pristine 4,4′-(hexafluoroisopropylidene)diphthalic anhydride-3,3′-dimethylnaphthidine and its thermally annealed counterpart at 530 °C exhibit high charge storage capabilities, enabling continuous photodegradation in the absence of light. The pre-irradiated catalyst exhibits an approximately 99% degradation of the dye, with a ~40% improvement relative to the non-pre-irradiated sample. We studied the influence of the chemical structure and porosity on the photocatalytic degradation efficiency in darkness by varying the polyimide chemical structure using different diamines. This research underscores the potential of polymers with intrinsic microporosity for application in the continuous degradation of dyes, contributing to the pursuit of cleaner water.

Ultrasonic Assisted Synthesis of CuFe2O4-Ag infused Gum Hydrogels Nanocomposite for photocatalytic Degradation of Organic Dye from Wastewater

Ultrasonic Assisted Synthesis of CuFe2O4-Ag infused Gum Hydrogels Nanocomposite for photocatalytic Degradation of Organic Dye from Wastewater

Mechanistic Insights and Emerging Trends in Photocatalytic Dye Degradation for Wastewater Treatment

AbstractThis review explores advancements, challenges, and considerations in photocatalytic dye degradation for sustainable wastewater treatment. It highlights smart photocatalyst design, visible‐light‐responsive materials, and co‐catalyst engineering, which enhance system efficacy. Despite environmental concerns, the eco‐friendly aspects of photocatalysis offer a promising alternative to traditional methods. Future perspectives emphasize nanotechnology's role in developing effective photocatalysts and integrating visible‐light and solar‐driven systems to meet sustainability goals. Efforts in co‐catalyst engineering and reactor design aim to optimize processes, addressing kinetic and scalability challenges, while economic research focuses on reducing costs to improve competitiveness.

Synthesis and characterization of micro-/nano-α-Fe2O3 for photocatalytic dye degradation.

Photocatalytic activity using micro-/nano-α-Fe2O3 on a large scale was carried out using a sol-gel autocombustion method. A degradation time of 60 min was noted for 50 mg of the catalyst. Post characterization, this catalyst system showed a degradation of about 53% (rate = 2.60 × 10-3 min-1) and 17% (rate = 1.38 × 10-2 min-1) under sunlight and up to 45% (rate = 1.13 × 10-3 min-1) and 7% (rate = 1.20 × 10-2 min-1) under a 400 W UV lamp for rhodamine 6G (R6G) and crystal violet (CV), respectively. Sunlight has a broad spectrum of light; it greatly accelerates the degradation process and creates ideal conditions for the reaction to occur. The rate of photocatalytic dye degradation of α-Fe2O3 without Fenton's reagent was found to be 7.84 × 10-3 min-1 in the presence of external air provided (in the photocatalytic setup) through a bubbler and 3.23 × 10-3 min-1 in the absence of the bubbler.

A New Type of Composite Catalyst α-nBACoPc/SnO2 Synergistic Photo-Catalytic Degradation of Dyes

A New Type of Composite Catalyst α-nBACoPc/SnO2 Synergistic Photo-Catalytic Degradation of Dyes

Green Synthesis of Mn‐Doped ZnO Nanoparticles Using Ipomoea Staphylina Leaf Extract: Characterization and Application of Photocatalytic Dye Degradation, Antibacterial and Antioxidant Activity

AbstractZinc oxide nanoparticles (ZnO NPs) and manganese‐doped zinc oxide nanoparticles (Mn‐ZnO NPs) were synthesized via a cost‐effective green combustion method employing watery leaf extracts from Ipomoea Staphylina. The nanoparticles were thoroughly characterized using FT‐IR, P‐XRD, UV‐DRS, and FE‐SEM with EDX techniques. X‐ray photoelectron spectroscopy (XPS) confirmed the successful doping of Mn in ZnO NPs. Evaluation of photocatalytic efficiency revealed that ZnO NPs degraded 76 % of Congo red dye (CR), while Mn‐doped ZnO NPs exhibited a higher degradation efficiency of 92 %. The photocatalytic performance of Mn‐doped ZnO NPs surpassed that of ZnO NPs, indicating their superior photocatalytic properties. Furthermore, both ZnO and Mn‐doped ZnO NPs displayed notable antimicrobial activity against Bacillus subtilis, Staphylococcus aureus, Escherichia coli, and Klebsiella pneumonia. Additionally, Mn‐doped ZnO NPs exhibited significant antioxidant activity, demonstrated by their ability to scavenge 1,1‐diphenyl‐2‐picrylhydrazyl (DPPH⋅) free radicals. These findings suggest that biosynthesized pure and doped NPs using plant extract can be promising candidates for antibacterial and antioxidant applications in biomedical, pharmaceutical, and wastewater treatment fields.

Hydrothermal synthesis, characterization of Co3Sb4O6F6 and carbon doped Co3Sb4O6F6 and their application towards photocatalytic dye degradation, adsorption, catalytic Knoevenagel condensation and bacterial disinfection

Single crystals of Co3Sb4O6F6 have been grown by employing hydrothermal techniques. Table sugar was utilized to prepare carbon-doped Co3Sb4O6F6. The objective was to employ Co(II)-based metal oxyfluoride comprising a stereochemically active lone pair element (Sb3+) and its carbon-doped analogues for the multifunctional applications. The impact of carbon doping on Co3Sb4O6F6 has been evaluated towards the changes in photocatalytic, catalytic, and adsorbent efficiency. The changes in carbon percentage affect the physical and chemical properties of the host material. A larger percentage of carbon doping turns the photocatalytic ability of the host material into an adsorbent for the removal of dye. The single crystal X-ray diffraction study reveals that Co3Sb4O6F6 crystallizes into cubic symmetry. However, powder X-ray diffraction study reveals the structural transformation in the carbon-doped Co3Sb4O6F6. It also reduces the band gap energy of the host material, and 4 wt% C@Co3Sb4O6F6 turns out to be an efficient photocatalyst. Large-scale carbon doping (15 wt%) appears to be an effective strategy to increase the surface charge and BET surface area, as consequences adsorption property develops in 15 wt% C@Co3Sb4O6F6/H2O2 for the elimination of methylene blue (MB). This favourable chemical adsorption process occurs with large maximum adsorption capacity (qmax = 58.41169 mg g-1), as evident from the Langmuir adsorption isotherm. Scavenger experiment confirms that the photocatalytic activities of the as-synthesised compounds were triggered by the active participation of the hydroxyl radical (.OH). The catalytic efficiencies of both parent and doped compounds are also established for the solvent-free Knoevenagel condensation reaction with 90 % yield at moderate temperature. Bacterial disinfection studies by the ‘Disc diffusion method’ confirm that Co3Sb4O6F6 shows better efficiency than the carbon doped compound against both Gram-positive and Gram-negative bacteria.

Efficient photocatalytic degradation of crystal violet dye using time-dependent ZnO nano spindle

Photocatalysis, utilizing metal–semiconductor oxides, has emerged as a promising technique for the oxidation of organic molecules due to its efficiency, cost-effectiveness, and eco-friendly nature. This study presents the synthesis and application of time-dependent ZnO nano spindles for the efficient photocatalytic degradation of crystal violet dye. ZnO nanostructures, known for their high photocatalytic activity, were synthesized using a simple and low-cost coprecipitation method, with the spindle morphology being fine-tuned by varying reaction times. The resulting nano spindles were characterized using X-ray diffraction (XRD), Fourier transmission infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and UV–vis spectroscopy to confirm their structural, morphological, and optical properties. XRD analysis revealed that the ZnO samples possess a hexagonal wurtzite crystal structure with a space group of P63mc. SEM analysis confirmed the formation of spindle-like morphologies, with the synthesized samples measuring just a few nanometers in size. The surface area and porosity of the ZnO samples have been observed by using the Brunauer–Emmett–Teller (BET) analysis. The obtained surface area of all ZnO samples is in the range of 15 to 30 m2g−1. Photocatalytic performance was evaluated under UV light irradiation, demonstrating that the degradation efficiency of CV dye significantly depends on the exposure duration and the morphological attributes of the ZnO nano spindles. The degradation kinetics followed a pseudo-first-order model, with the optimized ZnO nano spindles achieving up to 99 % degradation efficiency within 150 min. This study highlights the potential of time-dependent morphological control in ZnO nanostructures to enhance photocatalytic processes, presenting a viable solution for the treatment of dye-laden wastewater.

Synthesis and characterisation of visible light-responsive Fe-doped BiOCl NPs and their application for the remediation of textile dye by LED irradiation

ABSTRACT In the present research work, Fe-doped bismuth oxychloride (Fe-doped BiOCl) photocatalyst is synthesised through the precipitation technique, and the mineralisation of textile dye is investigated in the presence of light-emitting diode (LEDs) irradiation (400–700 nm). The prepared photocatalysts were characterised through various spectroscopic techniques for the detailed morphological, elemental and surface properties. The UV–vis absorbance maxima of Fe-doped BiOCl by UV-Vis was near 358 nm, while the band gap was 4.8 eV which is comparatively higher than the average value. Fourier transform infrared spectra showed typical bands of Fe doped BiOCl at 506 cm−1, 1601, 2337 and at 3565.0 cm−1. From the X-ray diffraction (XRD) pattern, the crystalline nature of the Fe-doped nanocomposite was confirmed whose calculated crystallite size was 41.12 nm. The major and sharp two theta peaks of XRD were at 11.95°, 24.07°, 25.81°, 32.46°, 33.39°, 36.47°. The microscopic technique showed that the size of the nanocomposite was 200–400 nm which was in the form of small nanosheets. The energy dispersive X-ray spectroscopy (EDS) showed peaks for Bi, O, Cl and Fe 36.91%, 26.48%, 36.37% and 0.24%, respectively, indicating the formation of the nanocomposite. The BET surface area of the Fe-doped BiOCl photocatalyst was 10.224 m2/g, while the pore volume was 0.065 cc/g. Further, the potential of the developed photocatalytic nanocomposite was evaluated for the photocatalytic degradation of the ethyl violet dye from the aqueous solutions. Various optimisation parameters have been discussed, and it has been found that 89% of the dye was degraded in 125 min with a 5.11 × 10−4 s−1 rate constant. The photocatalyst had shown excellent reusability and stability during the degradation of ethyl violet. The photocatalytic activity of Fe-doped BiOCl was compared with other photocatalysts and current literature and exhibited enhanced efficiency.

Green synthesis of Zn-doped TiO2 nanomaterials for photocatalytic degradation of crystal violet and methylene blue dyes under sunlight

Green synthesis of Zn-doped TiO2 nanomaterials for photocatalytic degradation of crystal violet and methylene blue dyes under sunlight

Plant extract mediated synthesis of BiFeO3 nanoparticles for photocatalytic degradation of methylene blue dye

Plant extract mediated synthesis of BiFeO3 nanoparticles for photocatalytic degradation of methylene blue dye

Sol-gel synthesis of Tb-doped lithium-nickel ferrite anchored onto g-C3N4 sheets for efficient photocatalytic degradation of organic dyes

Due to the advancement of industrialization, water pollution has become an alarming global issue. Many organic dyes, such as crystal violet and rhodamine B, present in industrial wastewater are causing severe health problems. Both of these dyes are carcinogenic. For their degradation, ferrites are synthesized in this research. Ferrites have high absorbing potential in visible regions and fast movement of charge carrier species. Therefore, the ferrites are potentially used in photocatalysis to purify contaminated water. Graphitic carbon nitride shows enhanced separation of charges, which lowers the rate of recombination of charge carrier species. Lithium nickel ferrite, lithium nickel ferrite doped with terbium, and its composite with graphitic carbon nitride (g-C3N4) are synthesized by sol-gel and ultra-sonication methods, respectively. The prepared samples are analyzed by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Scanning electron microscopy (SEM), Electrochemical impedance spectroscopy (EIS), and Mott-Schottky analysis. The bandgap of LiNiFe2O4 and LiNiTbFe2O4 was 2.35 eV, and 1.87 eV, respectively. LiNiTbFe2O4@g-C3N4 degraded 86 % crystal violet and 83 % rhodamine B in 120 min. The LiNiTbFe2O4@g-C3N4 composite showed the maximum degradation and can be potentially used in wastewater treatment.

THE ENCAPSULATION OF NOBLE METAL OVER METAL OXIDE SEMICONDUCTOR TiO2@Ag FOR THE DEGRADATION OF SULPHUR DYE IN EFFLUENT WATER BY PHOTOCATALYSIS AND ELECTROCHEMICAL WATER SPLITTING

Metal Oxide Semiconductor - Metal core-shell nanostructure with TiO2 as core and Ag nanoparticles as shell (TiO2@Ag) have been synthesized by a simple, environmentally friendly room temperature wet chemical method. The prepared TiO2@Ag core-shell nanoparticle was characterized by using various analytic techniques. X-ray diffraction analysis confirms the formation of tetragonal bcc structure anatase phase of TiO2 and Face-Centred Cubic structure (fcc) of silver in core-shell nanostructure. Fourier Transform Infrared Spectroscopy (FTIR) study proved the presence of characteristic peaks of both TiO2 and Ag. XPS study revealed the existence Ti4+ and metallic silver in core-shell nanostructure, High - Resolution Transmission Electron Microscopy (HR-TEM) and High - Resolution Scanning Electron Microscopy (HR – SEM) revealed the covering of Ag nanoparticles at the surface of TiO2 spheres. The TiO2@Ag core-shell nanoparticles exhibit a high residual mass of 95.9% and stability to withstand up to 1000⁰ C. The prepared TiO2@Ag core-shell nanoparticles as photocatalyst showed enhanced photocatalytic degradation (240 mins) of sulphur dye in effluent water with a degradation efficiency of 81% and capable of employing in wastewater treatment to eliminate toxic elements present in it. In the current study, we have used core-shell nanoparticles prepared using the wet chemical method at room temperature. The prepared core-shell nanoparticles were used to study the photocatalytic degradation of sulphur black dye directly collected from textile effluent water. They were also used for the production of oxygen and hydrogen through the electrolysis process. The synthesized TiO2@Ag core-shell nanoparticles act as effective electrocatalyst for the production of oxygen and hydrogen through oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) using the electrolysis process.

Captivating 2H-MoS2 Nanoflowers for Efficient NH3 Detection and Photocatalytic Dye Degradation

Captivating 2H-MoS2 Nanoflowers for Efficient NH3 Detection and Photocatalytic Dye Degradation

Preparation of C@CuNi/TiO2 with a Local surface plasmon resonance for photocatalytic degradation of organic dyes and antibiotics under visible light irradiation

A composite photocatalyst with carbon-coated CuNi nanoparticles-loaded TiO2 nanotubes (C@CuNi/TiO2) was synthesized via a microwave hydrothermal alkali stripping method combined with subsequent in-situ carbothermal reduction. The structure, morphology, and surface chemical composition were investigated using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy. The findings demonstrate that the microwave hydrothermal alkali peeling enables the formation of a three-dimensional C@CuNi/TiO2 composite structure. The results of transient photocurrent response (i-t) and electrochemical impedance spectroscopy under visible light demonstrate that C@CuNi/TiO2 exhibits a reduced rate of electron-hole recombination and lower surface resistance compared to C@TiO2, C@Cu/TiO2, and C@Ni/TiO2. After a two-hour exposure to visible light, the composite photocatalyst C@CuNi/TiO2, featuring a molar ratio of 2% CuNi nanoparticles to TiO2 nanotubes, exhibited remarkable degradation activity towards organic dyes (Rhodamine B (RhB), Methylene Blue (MB), Methyl Orange (MO)), as well as antibiotics (tetracycline (TC) and levofloxacin (LVFX)). After 5 cycles of photocatalytic reaction, the photodegradation activity of RhB remained above 79%. It is indicated that CuNi nanoparticles effectively trap and enrich photoelectrons through the photoexcitation of TiO2 nanotubes. Additionally, the local surface plasmonic resonance (LSPR) effect of CuNi nanoparticles reduces the recombination rate of photogenerated electron/hole and the electron transport resistance in the composite photocatalyst, thereby enhancing its overall photocatalytic activity.

Biosynthesis of Pt doped Zn bimetallic nanoparticles by using Polygonum glabrum extract for colorimetric, fluorimetric (Ni2+, Hg2+ and Fe2+) ions sensing and photocatalytic degradation of organic dye with electrochemical techniques

In the present study we aimed to explore the biosynthesis and characterization of monometallic platinum nanoparticles (PtNPs), zinc oxide nanoparticles (ZnONPs) are compared to the Pt doped ZnONPs (Pt-ZnONPs) and its sensing, electrochemical, photocatalytic properties. The bimetallic Pt-ZnONPs was synthesized by using Polygonum glabrum leaves extract; it acts as reducing agent and stabilizing agent. The analysis of colorimetric and fluorimertic sensing methods to determine the highly detection of Ni2+, Hg2+ and Fe2+ ions. The optical properties were characterized by UV-visible, FT-IR, XRD, XPS, SEM-EDX and TEM-SAED analysis. The synthesized monometallic PtNPs and ZnONPs are well dispersed spherical and hexagonal particles with sizes ranging from 8 nm to 25 nm. Electrochemical analysis were carried out the synthesized monometallic and bimetallic Pt-ZnONPs oxidation with reduction potentials by using cyclic voltammetry with UV-visible absorption spectroscopy based on band gap energy to calculation of LUMO and HOMO energy levels. The photocatalytic activities with band gap energy 96% for MeB indicated that only Pt doped ZnONPs for bimetallic Pt-ZnONPs nanocatalyst as compared to monometallic PtNPs and ZnONPs for single metal nanocatalyst actions. The highly sensitivity of Ni2+, Hg2+ and Fe2+ ions are combined with synthesized NPs extended to the oxidation-reduction potential for Pt2+ by Zn2+ ions may find sensitivity for trace different metal ions of pollution level with environmental sensing and photocatalytic applications.

The influence of operational factors on the photocatalytic degradation of methylene blue dye in aqueous Sr-Au-ZnO suspensions under UV-A light

Any of several processes that break down dyes, ideally into harmless chemicals, is referred to as industrial dye degradation. Water waste discharges various colors, particularly those used in the textile industry like methyl red and methylene blue, into ecosystems, leading to significant pollution of the water supply. Under UV-A irradiation, the photocatalytic degradation of a commercial heterocyclic aromatic chemical molecule called methylene blue (MB) has been investigated using an aqueous solution of Sr-Au-ZnO as a photocatalyst. Research has been done on how different process characteristics affect the degradation process. For the mineralization of MB dye under UV-A light, it was found that the optimized Sr-Au-ZnO was more effective than commercial catalysts (ZnO and benchmark photocatalyst Degussa P25), single metal dopants (Sr-ZnO, Au-ZnO), and prepared ZnO. The effects of operational parameters, such as the quantity of photocatalyst, dye concentration, and starting pH, on the photo-mineralization of MB are analyzed before optimal values are given. Chemical oxygen demand (COD) measurements have confirmed that MB is mineralized. Using GC-MS analysis, the intermediates produced during photodegradation were predicted, and an appropriate degradation pathway was suggested. This procedure can be used for treating wastewater from sewage since optimized Sr-Au-ZnO is reusable.