Phosphorescence Properties Research Articles

Modulation of Deep-Red to Near-Infrared Room-Temperature Charge-Transfer Phosphorescence of Crystalline "Pyrene Box" Cages by Coupled Ion/Guest Structural Self-Assembly.

Organic cocrystals obtained from multicomponent self-assembly have garnered considerable attention due to their distinct phosphorescence properties and broad applications. Yet, there have been limited reports on cocrystal systems that showcase efficient deep-red to near-infrared (NIR) charge-transfer (CT) phosphorescence. Furthermore, effective strategies to modulate the emission pathways of both fluorescence and phosphorescence remain underexplored. In this work, we dedicated our work to four distinct self-assembled cocrystals called "pyrene box" cages using 1,3,6,8-pyrenetetrasulfonate anions (PTS4-), 4-iodoaniline (1), guanidinium (G+), diaminoguanidinium (A2G+), and hydrated K+ countercations. The binding of such cations to PTS4- platforms adaptively modulates their supramolecular stacking self-assembly with guest molecules 1, allowing to steer the fluorescence and phosphorescence pathways. Notably, the confinement of guest molecule 1 within "pyrene box" PTSK{1} and PTSG{1} cages leads to an efficient deep-red to NIR CT phosphorescence emission. The addition of fuming gases like triethylamine and HCl allows reversible pH modulations of guest binding, which in turn induce a reversible transition of the "pyrene box" cage between fluorescence and phosphorescence states. This capability was further illustrated through a proof-of-concept demonstration in shrimp freshness detection. Our findings not only lay a foundation for future supramolecular designs leveraging weak intermolecular host-guest interactions to engineer excited states in interacting chromophores but also broaden the prospective applications of room-temperature phosphorescence materials in food safety detection.

Thermochromic Afterglow from Benzene-1,4-Diboronic Acid-Doped Co-crystals.

The accurate thermosensing requires a minimum impact of autofluorescence and light scattering from the samples. In this study, we discovered that commercially available benzene-1,4-diboronic acid (BDBA) doped co-crystals with trimethylolpropane (TMP) exhibit excellent thermochromic dual phosphorescence properties over a wide temperature range from -132 to 40 °C, despite its simple structure that does not have any donor-acceptor linkage. The dual phosphorescence was consisted of monomeric benzene-1,4-diboronate (BDBA ester) and aggregation-stabilized species. With an increase in temperature, the emission intensity from the monomeric state significantly decreased, whereas that originating from the aggregated state remained almost constant owing to the difference in their thermal stabilities. Further investigation revealed that molecular distortions in singlet excited states enable efficient intersystem crossing, causing efficient phosphorescence from the monomeric state of BDBA ester.

Microwave-assisted synthesis and characterization of SrAl2O4/Eu/Dy and the role of phosphorus dopants on its fluorescence and phosphorescence properties

Microwave-assisted synthesis and characterization of SrAl2O4/Eu/Dy and the role of phosphorus dopants on its fluorescence and phosphorescence properties

A thermosensitive luminescence halloysite-based nanocomposite enabling encryptable thermal printing.

In situ formation of carbon dots on halloysite nanotubes is demonstrated by treating polyacrylamide-grafted halloysite nanotubes with polycarboxylic acid without the recourse to extremely high temperatures or solvents. Thermosensitive luminescence and phosphorescence properties are carefully investigated. The polyacrylamide-grafted halloysite nanotubes are further processed as composite films for encryptable thermal printing.

Unveiling the potential of triphenylphosphine salts in tuning organic room temperature phosphorescence.

Triphenylphosphine (TPP) salt derivatives, with their rich chemistry of core-substitution, have emerged as promising candidates for ultralong room temperature phosphorescence (RTP) materials owing to their distinct molecular structures, high quantum efficiency and exceptional phosphorescence properties. This feature article highlights the vast potential of TPP salt derivatives in tunable RTP properties by exploring some factors such as the alkyl chains, halogen anions, through-space charge transfer states, etc., and recent advancements in multi-level information encryption, high-level anticounterfeiting tags and X-ray imaging applications. We anticipate that this article will assist in directing future analyses based on the mechanisms underlying the RTP behavior of TPP derivatives and offer guidance for the rational design of high-performance RTP materials.

Enhanced solid-state phosphorescence of organoplatinum π-systems by ion-pairing assembly.

Anion binding and ion pairing of dipyrrolyldiketone PtII complexes as anion-responsive π-electronic molecules resulted in photophysical modulations, as observed in solid-state phosphorescence properties. Modifications to arylpyridine ligands in the PtII complexes significantly impacted the assembling behaviour and photophysical properties of anion-free and anion-binding (ion-pairing) forms. The PtII complexes, in the presence of guest anions and their countercations, formed various anion-binding modes and ion-pairing assembled structures depending on constituents and forms (solutions and crystals). The PtII complexes emitted strong phosphorescence in deoxygenated solutions but showed extremely weak phosphorescence in the solid state owing to self-association. In contrast, the solid-state ion-pairing assemblies with tetraalkylammonium cations exhibited enhanced phosphorescence owing to the formation of hydrogen-bonding 1D-chain PtII complexes dispersed by stacking with aliphatic cations. Theoretical studies revealed that the enhanced phosphorescence in the solid-state ion-pairing assembly was attributed to preventing the delocalisation of the electron wavefunction over PtII complexes.

Employing racemization strategies to simultaneously enhance the quantum yield, lifetime, and water stability of room-temperature phosphorescent materials.

Room temperature phosphorescence (RTP) materials are increasingly recognized for their superior luminescent properties, which are pivotal in applications such as anti-counterfeiting, information storage, and optoelectronics. Despite this, the sensitivity of most RTP systems to humidity presents a significant challenge in achieving durable RTP performance in aqueous environments. This study proposes a strategy to enhance organic room-temperature phosphorescence through racemization. By incorporating external racemates of various chiral phosphors-NDBD-Ph, NDBD-Ph-Ph, NDBD-CH3, and NDBD-O-CH3-into a polyacrylonitrile (PAN) matrix, we significantly enhance the RTP properties (quantum yield, lifetime, and afterglow-time) of the resultant films. This enhancement can be attributed to the increased density of racemic molecules in the matrix and the increased spin-orbit coupling (SOC), facilitating the development of a long-lasting polymer RTP system in water. Notably, the racemic rac-NDBD-Ph@PAN film exhibits a persistent bright turquoise afterglow, even after immersion in water for a month. Furthermore, for the first time, we achieved an enhanced green to cyan RTP response to pH variations under both acidic and alkaline conditions (pH = 2-12), with the maximum phosphorescence emission intensity increasing up to threefold. The remarkable water stability, reversible response characteristics, and enhanced phosphorescence properties of this system offer promising potential for dynamic information encryption in aqueous environments.

Lysosome-targeted cyclometalated Ir(III) complexes as photosensitizers/photoredox catalysts for cancer therapy.

A novel lysosome-targeted photosensitizer/photoredox catalyst based on cyclometalated Ir(III) complex IrL has been designed and synthesized, which exhibited excellent phosphorescence properties and the ability to generate single oxygen (1O2) and photocatalytically oxidize 1,4-dihydronicotinamide adenine dinucleotide (NADH) under light irradiation. Most importantly, the aforementioned activities are significantly enhanced due to protonation under acidic conditions, which makes them highly attractive in light-activated tumor therapy, especially for acidic lysosomes and tumor microenvironments. The photocytotoxicity of IrL and the mechanism of cell death have been investigated. Additionally, the tumor-killing ability of IrL under light irradiation was evaluated using a 4T1 tumor-bearing mouse model. This work provides a strategy for the development of lysosome-targeted photosensitizers/photoredox catalysts to overcome hypoxic tumors.

Coordination-induced and tunable layered rare-earth hydroxide-complex intercalated nanohybrid phosphorescent photosensitizer and therapy.

Hydrotalcite intercalated nanohybrid has served as a vital phosphorescent photosensitizer owing to remarkable 1O2 quantum yield and high cell mortality performance. However, it is rather difficult for potential large or complex guest phosphors to directly intercalate into the hydrotalcite gallery. Hence, it is necessary to regulate the interlayer microenvironment of hydrotalcites firstly for outstanding photosensitive properties. Herein, two isomers, 5,5'BDA and 4,4'BDA, with distinctive dual coordinative features were selected to modify the layer microenvironment of the LGdH gallery and induce the introduction of prospective Gd(HPhN)3 phosphorescent complexes into hydrotalcite through two different coordination effects successively. A LGdH-BDA-Gd(HPhN)3 intercalated nanohybrid phosphorescent photosensitizer was successfully obtained. The results indicated that the more efficient improvement was observed from 5,5'BDA due to offering a more spacious and stable space. Specifically, LGdH-5,5'BDA-Gd(HPhN)3 showed significantly better room temperature phosphorescence properties than LGdH-4,4'BDA-Gd(HPhN)3, whose lifetime was nearly 15 times longer than the latter. Additionally, the LGdH-5,5'BDA-Gd(HPhN)3 system displayed superior singlet oxygen generation in vitro under 460 nm irradiation (the quantum yield Φ = 0.48) and outstanding photodynamic therapy performance in tumor cells. LGdH presented more remarkable enhancement performance on the RTP properties of the luminescent molecules. This work provides a novel platform for designing a high-performance hydrotalcite intercalated nanohybrid phosphorescent photosensitizer through coordination induction to regulate the layer microenvironment.

Recent progress in ion-regulated organic room-temperature phosphorescence.

Organic room-temperature phosphorescence (RTP) materials have attracted considerable attention for their extended afterglow at ambient conditions, eco-friendliness, and wide-ranging applications in bio-imaging, data storage, security inks, and emergency illumination. Significant advancements have been achieved in recent years in developing highly efficient RTP materials by manipulating the intermolecular interactions. In this perspective, we have summarized recent advances in ion-regulated organic RTP materials based on the roles and interactions of ions, including the ion-π interactions, electrostatic interactions, and coordinate interactions. Subsequently, the current challenges and prospects of utilizing ionic interactions for inducing and modulating the phosphorescent properties are presented. It is anticipated that this perspective will provide basic guidelines for fabricating novel ionic RTP materials and further extend their application potential.

Layered rare-earth hydroxides as multi-modal medical imaging probes: particle size optimisation and compositional exploration.

Recently, layered rare-earth hydroxides (LRHs) have received growing attention in the field of theranostics. We have previously reported the hydrothermal synthesis of layered terbium hydroxide (LTbH), which exhibited high biocompatibility, reversible uptake of a range of model drugs, and release-sensitive phosphorescence. Despite these favourable properties, LTbH particles produced by the reported method suffered from poor size-uniformity (670 ± 564 nm), and are thus not suitable for therapeutic applications. To ameliorate this issue, we first derive an optimised hydrothermal synthesis method to generate LTbH particles with a high degree of homogeneity and reproducibility, within a size range appropriate for in vivo applications (152 ± 59 nm, n = 6). Subsequently, we apply this optimised method to synthesise a selected range of LRH materials (R = Pr, Nd, Gd, Dy, Er, Yb), four of which produced particles with an average size under 200 nm (Pr, Nd, Gd, and Dy) without the need for further optimisation. Finally, we incorporate Gd and Tb into LRHs in varying molar ratios (1 : 3, 1 : 1, and 3 : 1) and assess the combined magnetic relaxivity and phosphorescence properties of the resultant LRH materials. The lead formulation, LGd1.41Tb0.59H, was demonstrated to significantly shorten the T2 relaxation time of water (r2 = 52.06 mM-1 s-1), in addition to exhibiting a strong phosphorescence signal (over twice that of the other LRH formulations, including previously reported LTbH), therefore holding great promise as a potential multi-modal medical imaging probe.

Fused-Ring Pyrrole-Based Near-Infrared Emissive Organic RTP Material for Persistent Afterglow Bioimaging.

Organic near-infrared room temperature phosphorescence (RTP) materials offer remarkable advantages in bioimaging due to their characteristic time scales and background noise elimination. However, developing near-infrared RTP materials for deep tissue imaging still faces challenges since the small band gap may increase the non-radiative decay, resulting in weak emission and short phosphorescence lifetime. In this study, fused-ring pyrrole-based structures were employed as the guest molecules for the construction of long wavelength emissive RTP materials. Compared to the decrease of the singlet energy level, the triplet energy level showed a more effectively decrease with the increase of the conjugation of the substituent groups. Moreover, the sufficient conjugation of fused ring structures in the guest molecule suppresses the non-radiative decay of triplet excitons. Therefore, a near-infrared RTP material (764 nm) was achieved for deep penetration bioimaging. Tumor cell membrane is used to coat RTP nanoparticles (NPs) to avoid decreasing the RTP performance compared to traditional coating by amphiphilic surfactants. RTP NPs with tumor-targeting properties show favorable phosphorescent properties, superior stability, and excellent biocompatibility. These NPs are applied for time-resolved luminescence imaging to eliminate background interference with excellent tissue penetration. This study provides a practical solution to prepare long-wavelength and long-lifetime organic RTP materials and their applications in bioimaging.

Fused‐Ring Pyrrole‐Based Near‐Infrared Emissive Organic RTP Material for Persistent Afterglow Bioimaging

AbstractOrganic near‐infrared room temperature phosphorescence (RTP) materials offer remarkable advantages in bioimaging due to their characteristic time scales and background noise elimination. However, developing near‐infrared RTP materials for deep tissue imaging still faces challenges since the small band gap may increase the non‐radiative decay, resulting in weak emission and short phosphorescence lifetime. In this study, fused‐ring pyrrole‐based structures were employed as the guest molecules for the construction of long wavelength emissive RTP materials. Compared to the decrease of the singlet energy level, the triplet energy level showed a more effectively decrease with the increase of the conjugation of the substituent groups. Moreover, the sufficient conjugation of fused ring structures in the guest molecule suppresses the non‐radiative decay of triplet excitons. Therefore, a near‐infrared RTP material (764 nm) was achieved for deep penetration bioimaging. Tumor cell membrane is used to coat RTP nanoparticles (NPs) to avoid decreasing the RTP performance compared to traditional coating by amphiphilic surfactants. RTP NPs with tumor‐targeting properties show favorable phosphorescent properties, superior stability, and excellent biocompatibility. These NPs are applied for time‐resolved luminescence imaging to eliminate background interference with excellent tissue penetration. This study provides a practical solution to prepare long‐wavelength and long‐lifetime organic RTP materials and their applications in bioimaging.

Synthesis, Structural Characterization, and Phosphorescence Properties of Trigonal Zn(II) Carbene Complexes.

The sterically demanding N-heterocyclic carbene ITr (N,N'-bis(triphenylmethyl)imidazolylidene) was employed for the preparation of novel trigonal zinc(II) complexes of the type [ZnX2(ITr)] [X = Cl (1), Br (2), and I (3)], for which the low coordination mode was confirmed in both solution and solid state. Because of the atypical coordination geometry, the reactivity of 1-3 was studied in detail using partial or exhaustive halide exchange and halide abstraction reactions to access [ZnLCl(ITr)] [L = carbazolate (4), 3,6-di-tert-butyl-carbazolate (5), phenoxazine (6), and phenothiazine (7)], [Zn(bdt)(ITr)] (bdt = benzene-1,2-dithiolate) (8), and cationic [Zn(μ2-X)(ITr)]2[B(C6F5)4]2 [X = Cl (9), Br (10), and I (11)], all of which were isolated and structurally characterized. Importantly, for all complexes 4-11, the trigonal coordination environment of the ZnII ion is maintained, demonstrating a highly stabilizing effect due to the steric demand of the ITr ligand, which protects the metal center from further ligand association. In addition, complexes 1-3 and 8-11 show long-lived luminescence from triplet excited states in the solid state at room temperature, according to our photophysical studies. Our quantum chemical density functional theory/multireference configuration interaction (DFT/MRCI) calculations reveal that the phosphorescence of 8 originates from a locally excited triplet state on the bdt ligand. They further suggest that the phenyl substituents of ITr are photochemically not innocent but can coordinate to the electron-deficient metal center of this trigonal complex in the excited state.

Room-temperature phosphorescence of a calcium-based metal-organic framework

A 3D calcium-based metal–organic framework (Ca-MOF) (named CaL-3) is obtained with 2,3-pyrazine-dicarboxylic acid (H2PZDC) and Ca(NO3)2·4H2O. It is the first time that the room-temperature phosphorescence properties of Ca-MOF based on H2PZDC were studied. Notably, CaL-3 exhibits a remarkable afterglow lasting 5 s at room temperature, which is mainly attributed to the unique framework structure of the Ca-MOF.

Polylactic acid film embedded with phosphor nanoparticles: Photochromic and afterglow biodegradable window and concrete

A smart window is a window made of a stimuli-responsive material whose transparency can be switched on and off. However, smart windows are often made of fragile, non-biodegradable and costly glass. Herein, this work presents the preparation of a transparent smart window from the environmentally-friendly polylactic acid (PLA) plastic. The plastic window was prepared by physically immobilizing nanoparticles of lanthanide-doped aluminate (NLdA; 79-112 nm) at different ratios into PLA bulk. The developed plastic showed afterglow emission, photochromism, superhydrophobicity, durability, UV shielding, rigidity, photostability, biodegradability, and excellent optical transmittance. NLdA was produced as nanoparticles to enhance NLdA dispersion in the plastic mass. NLdA must be uniformly disseminated in the PLA matrix without aggregation in order to provide transparent smart PLA window with long-persistent phosphorescence and photochromic properties. Different analytical methods were employed to determine the morphology, chemical composition, photoluminescence and coloration properties of smart films. There was an examination of the hardness characteristics. The transparent PLA window absorbed light at 365 nm and emitted at 435 nm and 517 nm, demonstrating reversible photochromism to green when irradiated with UV and greenish-yellow emission when exposed to darkness. There was a significant improvement in ultraviolet shielding and hydrophobicity upon increasing the phosphor content.

Two calcium-based metal organic frameworks with long afterglow as anticounterfeiting materials

Calcium-based metal–organic frameworks (Ca-MOFs) with room-temperature phosphorescence (RTP) properties are promising for applications. Herein, two 3D Ca-MOFs with robust RTP have been successfully synthesized with scaled-up production. The afterglows of these two Ca-MOFs are visible to the naked eye in darkness that lasts for approximately 13 s once they are excited with 365 nm UV light. It is mainly attributed to the rigid and dense structures of 3D Ca-MOFs via 4,5-Imidazole dicarboxylic acid tugging Ca2+ elucidated by means of single-crystal X-ray diffraction and density functional theory (DFT). Furthermore, a program was designed for dynamic anti-counterfeiting based on the long afterglow properties of Ca-MOFs, which can be extended for all kinds of material with long afterglow.

Decoration of MoO3-x on clay mineral matrix with great phosphorescence properties for oxygen activation, photochemical properties, bactericidal and oxidase-like mimics for prompt detection of pesticide

Decoration of MoO3-x on clay mineral matrix with great phosphorescence properties for oxygen activation, photochemical properties, bactericidal and oxidase-like mimics for prompt detection of pesticide

Multicolor‐Tunable and Time‐Dependent Circularly Polarized Room‐Temperature Phosphorescence from Liquid Crystal Copolymers

AbstractCircularly polarized luminescent (CPL) materials have significant promising applications in organic light‐emitting diodes, asymmetric synthesis, and other fields. However, due to the instability of triplet‐state excitons, how to achieve an effective combination of CPL with room‐temperature phosphorescence (RTP) remains a formidable challenge. Here, a simple and feasible method for constructing polymer‐based CPRTP materials is proposed by preparing chiral phosphorescent liquid crystals through copolymerization. A series of RTP chiral liquid crystal copolymers are successfully synthesized by copolymerizing phosphorescent monomer bearing chiral cholesterol mesogen with phosphorescent monomer bearing dibenzofuran chromophore. Due to the introduction of chiral cholesterol mesogen, copolymers can form chiral smectic C‐phase liquid crystals. Utilizing their selective reflection characteristic, efficient CPRTP is achieved, with a glum value of up to −1.6 × 10−2. In addition, both components in copolymers exhibit RTP properties and show significant differences in phosphorescence color and lifetime. By changing the composition of copolymers, the regulation of their phosphorescence properties is successfully achieved. As a result, multicolor‐tunable and time‐dependent CPRTP materials are successfully prepared.

Room Temperature Phosphorescence in Chiral 0D Zn(II) Metal Halide Crystals for Multiple Anti‐Counterfeiting

AbstractThe development of metal halides that enable multiple information storage and cryptographic security is highly desirable but remains a challenge. Here, a pair of 0D Zn(II) metal halide enantiomers ZnCl2·R/S‐2‐MP with excitation wavelength‐dependent emission and room temperature phosphorescence properties are reported. Organic ligands via N─H···Cl hydrogen bonding induce structural chirality. In order to stabilize the triplet state exciton and achieve excellent photophysical properties, the organic ligands combine with halogens to promote emission. The differences between the photophysical properties of ZnCl2·R‐2‐MP and ZnCl2·S‐2‐MP are analyzed in depth. Furthermore, combined with femtosecond transient absorption (fs‐TA) results, the long phosphorescence lifetimes may originate from the triplet state emission due to the synergistic effect between the organic components and the inorganic metal halides. The design strategy of advanced multiple anticounterfeiting technology is further extended.