Phosphite Dianion Research Articles

Catalysis by Orotidine 5′-Monophosphate Decarboxylase: Effect of 5-Fluoro and 4′-Substituents on the Decarboxylation of Two-Part Substrates

The syntheses of two novel truncated analogs of the natural substrate orotidine 5'-monophosphate (OMP) for orotidine 5'-monophosphate decarboxylase (OMPDC) with enhanced reactivity toward decarboxylation are reported: 1-(β-d-erythrofuranosyl)-5-fluoroorotic acid (FEO) and 5'-deoxy-5-fluoroorotidine (5'-dFO). A comparison of the second-order rate constants for the OMPDC-catalyzed decarboxylations of FEO (10 M⁻¹ s⁻¹) and 1-(β-d-erythrofuranosyl)orotic acid (EO, 0.026 M⁻¹ s⁻¹) shows that the vinyl carbanion-like transition state is stabilized by 3.5 kcal/mol by interactions with the 5-F substituent of FEO. The OMPDC-catalyzed decarboxylations of FEO and EO are both activated by exogenous phosphite dianion (HPO₃²⁻), but the 5-F substituent results in only a 0.8 kcal stabilization of the transition state for the phosphite-activated reaction of FEO. This provides strong evidence that the phosphite-activated OMPDC-catalyzed reaction of FEO is not limited by the chemical step of decarboxylation of the enzyme-bound substrate. Evidence is presented that there is a change in the rate-limiting step from the chemical step of decarboxylation for the phosphite-activated reaction of EO, to closure of the phosphate gripper loop and an enzyme conformational change at the ternary E•FEO•HPO₃²⁻ complex for the reaction of FEO. The 4'-CH₃ and 4'-CH₂OH groups of 5'-dFO and orotidine, respectively, result in identical destabilizations of the transition state for the unactivated decarboxylation of 2.9 kcal/mol. By contrast, the 4'-CH₃ group of 5'-dFO and the 4'-CH₂OH group of orotidine result in very different 4.7 and 8.3 kcal/mol destabilizations of the transition state for the phosphite-activated decarboxylation. Here, the destabilizing effect of the 4'-CH₃ substituent at 5'-dFO is masked by the rate-limiting conformational change that depresses the third-order rate constant for the phosphite-activated reaction of the parent substrate FEO.

Mechanism for Activation of Triosephosphate Isomerase by Phosphite Dianion: The Role of a Hydrophobic Clamp

The role of the hydrophobic side chains of Ile-172 and Leu-232 in catalysis of the reversible isomerization of R-glyceraldehyde 3-phosphate (GAP) to dihydroxyacetone phosphate (DHAP) by triosephosphate isomerase (TIM) from Trypanosoma brucei brucei (Tbb) has been investigated. The I172A and L232A mutations result in 100- and 6-fold decreases in k(cat)/K(m) for the isomerization reaction, respectively. The effect of the mutations on the product distributions for the catalyzed reactions of GAP and of [1-(13)C]-glycolaldehyde ([1-(13)C]-GA) in D(2)O is reported. The 40% yield of DHAP from wild-type Tbb TIM-catalyzed isomerization of GAP with intramolecular transfer of hydrogen is found to decrease to 13% and to 4%, respectively, for the reactions catalyzed by the I172A and L232A mutants. Likewise, the 13% yield of [2-(13)C]-GA from isomerization of [1-(13)C]-GA in D(2)O is found to decrease to 2% and to 1%, respectively, for the reactions catalyzed by the I172A and L232A mutants. The decrease in the yield of the product of intramolecular transfer of hydrogen is consistent with a repositioning of groups at the active site that favors transfer of the substrate-derived hydrogen to the protein or the oxygen anion of the bound intermediate. The I172A and L232A mutations result in (a) a >10-fold decrease (I172A) and a 17-fold increase (L232A) in the second-order rate constant for the TIM-catalyzed reaction of [1-(13)C]-GA in D(2)O, (b) a 170-fold decrease (I172A) and 25-fold increase (L232A) in the third-order rate constant for phosphite dianion (HPO(3)(2-)) activation of the TIM-catalyzed reaction of GA in D(2)O, and (c) a 1.5-fold decrease (I172A) and a larger 16-fold decrease (L232A) in K(d) for activation of TIM by HPO(3)(2-) in D(2)O. The effects of the I172A mutation on the kinetic parameters for the wild-type TIM-catalyzed reactions of the whole substrate and substrate pieces are consistent with a decrease in the basicity of the carboxylate side chain of Glu-167 for the mutant enzyme. The data provide striking evidence that the L232A mutation leads to a ca. 1.7 kcal/mol stabilization of a catalytically active loop-closed form of TIM (E(C)) relative to an inactive open form (E(O)).

Orotidine 5′-Monophosphate Decarboxylase: Transition State Stabilization from Remote Protein–Phosphodianion Interactions

Mutants of orotidine 5'-monophosphate decarboxylase containing all possible single (Q215A, Y217F, and R235A), double, and triple substitutions of the side chains that interact with the phosphodianion group of the substrate orotidine 5'-monophosphate have been prepared. Essentially the entire effect of these mutations on the decarboxylation of the truncated neutral substrate 1-(β-d-erythrofuranosyl)orotic acid that lacks a phosphodianion group is expressed as a decrease in the third-order rate constant for activation by phosphite dianion. The results are consistent with a model in which phosphodianion binding interactions are utilized to stabilize a rare closed enzyme form that exhibits a high catalytic activity for decarboxylation.

Mechanism for Activation of Triosephosphate Isomerase by Phosphite Dianion: The Role of a Ligand-Driven Conformational Change

The L232A mutation in triosephosphate isomerase (TIM) from Trypanosoma brucei brucei results in a small 6-fold decrease in k(cat)/K(m) for the reversible enzyme-catalyzed isomerization of glyceraldehyde 3-phosphate to give dihydroxyacetone phosphate. In contrast, this mutation leads to a 17-fold increase in the second-order rate constant for the TIM-catalyzed proton transfer reaction of the truncated substrate piece [1-(13)C]glycolaldehyde ([1-(13)C]-GA) in D(2)O, a 25-fold increase in the third-order rate constant for the reaction of the substrate pieces GA and phosphite dianion (HPO(3)(2-)), and a 16-fold decrease in K(d) for binding of HPO(3)(2-) to the free enzyme. Most significantly, the mutation also results in an 11-fold decrease in the extent of activation of the enzyme toward turnover of GA by bound HPO(3)(2-). The data provide striking evidence that the L232A mutation leads to a ca. 1.7 kcal/mol stabilization of a catalytically active loop-closed form of TIM (E(c)) relative to an inactive open form (E(o)). We propose that this is due to the relief, in L232A mutant TIM, of unfavorable steric interactions between the bulky hydrophobic side chain of Leu-232 and the basic carboxylate side chain of Glu-167, the catalytic base, which destabilize E(c) relative to E(o).

Wildtype and Engineered Monomeric Triosephosphate Isomerase from Trypanosoma brucei: Partitioning of Reaction Intermediates in D2O and Activation by Phosphite Dianion

Product yields for the reactions of (R)-glyceraldehyde 3-phosphate (GAP) in D2O at pD 7.9 catalyzed by wildtype triosephosphate isomerase from Trypanosoma brucei brucei (Tbb TIM) and a monomeric variant (monoTIM) of this wildtype enzyme were determined by (1)H NMR spectroscopy and were compared with the yields determined in earlier work for the reactions catalyzed by TIM from rabbit and chicken muscle [O'Donoghue, A. C., Amyes, T. L., and Richard, J. P. (2005), Biochemistry 44, 2610 - 2621]. Three products were observed from the reactions catalyzed by TIM: dihydroxyacetone phosphate (DHAP) from isomerization with intramolecular transfer of hydrogen, d-DHAP from isomerization with incorporation of deuterium from D2O into C-1 of DHAP, and d-GAP from incorporation of deuterium from D2O into C-2 of GAP. The yield of DHAP formed by intramolecular transfer of hydrogen decreases from 49% for the muscle enzymes to 40% for wildtype Tbb TIM to 34% for monoTIM. There is no significant difference in the ratio of the yields of d-DHAP and d-GAP for wildtype TIM from muscle sources and Trypanosoma brucei brucei, but partitioning of the enediolate intermediate of the monoTIM reaction to form d-DHAP is less favorable ((k(C1))(D)/(k(C2))(D) = 1.1) than for the wildtype enzyme ((k(C1))(D)/(k(C2))(D) = 1.7). Product yields for the wildtype Tbb TIM and monoTIM-catalyzed reactions of glycolaldehyde labeled with carbon-13 at the carbonyl carbon ([1-(13)C]-GA) at pD 7.0 in the presence of phosphite dianion and in its absence were determined by (1)H NMR spectroscopy [Go, M. K., Amyes, T. L., and Richard, J. P. (2009) Biochemistry 48, 5769-5778]. There is no detectable difference in the yields of the products of wildtype muscle and Tbb TIM-catalyzed reactions of [1-(13)C]-GA in D2O. The kinetic parameters for phosphite dianion activation of the reactions of [1-(13)C]-GA catalyzed by wildtype Tbb TIM are similar to those reported for the enzyme from rabbit muscle [Amyes, T. L. and Richard, J. P. (2007) Biochemistry 46, 5841-5854], but there is no detectable dianion activation of the reaction catalyzed by monoTIM. The engineered disruption of subunit contacts at monoTIM causes movement of the essential side chains of Lys-13 and His-95 away from the catalytic active positions. We suggest that this places an increased demand that the intrinsic binding energy of phosphite dianion be utilized to drive the change in the conformation of monoTIM back to the active structure for wildtype TIM.

OMP Decarboxylase: Phosphodianion Binding Energy Is Used To Stabilize a Vinyl Carbanion Intermediate

Orotidine 5'-monophosphate decarboxylase (OMPDC) catalyzes the exchange for deuterium from solvent D(2)O of the C-6 proton of 1-(β-d-erythrofuranosyl)-5-fluorouracil (FEU), a phosphodianion truncated product analog. The deuterium exchange reaction of FEU is accelerated 1.8 × 10(4)-fold by 1 M phosphite dianion (HPO(3)(2-)). This corresponds to a 5.8 kcal/mol stabilization of the vinyl carbanion-like transition state, which is similar to the 7.8 kcal/mol stabilization of the transition state for OMPDC-catalyzed decarboxylation of a truncated substrate analog by bound HPO(3)(2-). These results show that the intrinsic binding energy of phosphite dianion is used in the stabilization of the vinyl carbanion-like transition state common to the decarboxylation and deuterium exchange reactions.

An Examination of the Relationship between Active Site Loop Size and Thermodynamic Activation Parameters for Orotidine 5′-Monophosphate Decarboxylase from Mesophilic and Thermophilic Organisms

Closure of the active site phosphate gripper loop of orotidine 5'-monophosphate decarboxylase from Saccharomyces cerevisiae (ScOMPDC) over the bound substrate orotidine 5'-monophosphate (OMP) activates the bound substrate for decarboxylation by at least 10(4)-fold [Amyes, T. L., Richard, J. P., and Tait, J. J. (2005) J. Am. Chem. Soc. 127, 15708-15709]. The 19-residue phosphate gripper loop of the mesophilic ScOMPDC is much larger than the nine-residue loop at the ortholog from the thermophile Methanothermobacter thermautotrophicus (MtOMPDC). This difference in loop size results in a small decrease in the total intrinsic phosphate binding energy of the phosphodianion group of OMP from 11.9 to 11.6 kcal/mol, along with a modest decrease in the extent of activation by phosphite dianion of decarboxylation of the truncated substrate 1-(beta-D-erythrofuranosyl)orotic acid. The activation parameters DeltaH(double dagger) and DeltaS(double dagger) for k(cat) for decarboxylation of OMP are 3.6 kcal/mol and 10 cal K(-1) mol(-1) more positive, respectively, for MtOMPDC than for ScOMPDC. We suggest that these differences are related to the difference in the size of the active site loops at the mesophilic ScOMPDC and the thermophilic MtOMPDC. The greater enthalpic transition state stabilization available from the more extensive loop-substrate interactions for the ScOMPDC-catalyzed reaction is largely balanced by a larger entropic requirement for immobilization of the larger loop at this enzyme.

Hydron Transfer Catalyzed by Triosephosphate Isomerase. Products of the Direct and Phosphite-Activated Isomerization of [1-13C]-Glycolaldehyde in D2O

Product distributions for the reaction of glycolaldehyde labeled with carbon-13 at the carbonyl carbon ([1-(13)C]-GA) catalyzed by triosephosphate isomerase (TIM) in D(2)O at pD 7.0 in the presence of phosphite dianion and in its absence were determined by (1)H NMR spectroscopy. We observe three products for the relatively fast phosphite-activated reaction (Amyes, T. L., and Richard, J. P. (2007) Biochemistry 46, 5841-5854): [2-(13)C]-GA from isomerization with intramolecular transfer of hydrogen (12% of products), [2-(13)C,2-(2)H]-GA from isomerization with incorporation of deuterium from D(2)O at C-2 (64% of products), and [1-(13)C,2-(2)H]-GA from incorporation of deuterium from D(2)O at C-2 (23% of products). The much slower unactivated reaction in the absence of phosphite results in formation of the same three products along with the doubly deuterated product [1-(13)C,2,2-(2)H(2)]-GA. The two isomerization products ([2-(13)C]-GA and [2-(13)C,2-(2)H]-GA) are formed in the same relative yields in both the unactivated and the phosphite-activated reactions. However, the additional [1-(13)C,2-(2)H]-GA and the doubly deuterated [1-(13)C,2,2-(2)H(2)]-GA formed in the unactivated TIM-catalyzed reaction are proposed to result from nonspecific reaction(s) at the protein surface. The data provide evidence that phosphite dianion affects the rate, but not the product distribution, of the TIM-catalyzed reaction of [1-(13)C]-GA at the enzyme active site. They are consistent with the conclusion that both reactions occur at an unstable loop-closed form of TIM and that activation of the isomerization reaction by phosphite dianion results from utilization of the intrinsic binding energy of phosphite dianion to stabilize the active loop-closed enzyme.

Dissecting the Total Transition State Stabilization Provided by Amino Acid Side Chains at Orotidine 5′-Monophosphate Decarboxylase: A Two-Part Substrate Approach

Kinetic analysis of decarboxylation catalyzed by S154A, Q215A, and S154A/Q215A mutant yeast orotidine 5'-monophosphate decarboxylases with orotidine 5'-monophosphate (OMP) and with a truncated nucleoside substrate (EO) activated by phosphite dianion shows (1) the side chain of Ser-154 stabilizes the transition state through interactions with the pyrimidine rings of OMP or EO, (2) the side chain of Gln-215 interacts with the phosphodianion group of OMP or with phosphite dianion, and (3) the interloop hydrogen bond between the side chains of Ser-154 and Gln-215 orients the amide side chain of Gln-215 to interact with the phosphodianion group of OMP or with phosphite dianion.

A Substrate in Pieces: Allosteric Activation of Glycerol 3-Phosphate Dehydrogenase (NAD+) by Phosphite Dianion

The ratio of the second-order rate constants for reduction of dihydroxyacetone phosphate (DHAP) and of the neutral truncated substrate glycolaldehyde (GLY) by glycerol 3-phosphate dehydrogenase (NAD (+), GPDH) saturated with NADH is (1.0 x 10 (6) M (-1) s (-1))/(8.7 x 10 (-3) M (-1) s (-1)) = 1.1 x 10 (8), which was used to calculate an intrinsic phosphate binding energy of at least 11.0 kcal/mol. Phosphite dianion binds very weakly to GPDH ( K d > 0.1 M), but the bound dianion strongly activates GLY toward enzyme-catalyzed reduction by NADH. Thus, the large intrinsic phosphite binding energy is expressed only at the transition state for the GPDH-catalyzed reaction. The ratio of rate constants for the phosphite-activated and the unactivated GPDH-catalyzed reduction of GLY by NADH is (4300 M (-2) s (-1))/(8.7 x 10 (-3) M (-1) s (-1)) = 5 x 10 (5) M (-1), which was used to calculate an intrinsic phosphite binding energy of -7.7 kcal/mol for the association of phosphite dianion with the transition state complex for the GPDH-catalyzed reduction of GLY. Phosphite dianion has now been shown to activate bound substrates for enzyme-catalyzed proton transfer, decarboxylation, hydride transfer, and phosphoryl transfer reactions. Structural data provide strong evidence that enzymic activation by the binding of phosphite dianion occurs at a modular active site featuring (1) a binding pocket complementary to the reactive substrate fragment which contains all the active site residues needed to catalyze the reaction of the substrate piece or of the whole substrate and (2) a phosphate/phosphite dianion binding pocket that is completed by the movement of flexible protein loop(s) to surround the nonreacting oxydianion. We propose that loop motion and associated protein conformational changes that accompany the binding of phosphite dianion and/or phosphodianion substrates lead to encapsulation of the substrate and/or its pieces in the protein interior, and to placement of the active site residues in positions where they provide optimal stabilization of the transition state for the catalyzed reaction.

Orotidine 5’‐Monophosphate Decarboxylase: Effect of an S154A Mutation on Enzyme‐Catalyzed Decarboxylation of OMP and on Decarboxylation of Complexes that Contain the Substrate Pieces

Orotidine 5’‐monophosphate decarboxylase (OMPDC) catalyzes the chemically difficult decarboxylation of orotidine 5’‐monophosphate (OMP) to give uridine 5’‐monophosphate (UMP) (Scheme 1). The ratio of the second order rate constants for decarboxylation of OMP and of a truncated substrate 1‐(β‐D‐erythrofuranosyl)orotic acid (EO), (4 × 108)‐fold, gives an intrinsic phosphate binding energy of 11.8 kcal/mol. More than half of the dianion binding energy (7.8 kcal/mol) can be recovered in the binding of phosphite dianion to the (OMPDC•EO)‡ complex. The effect of the S154A mutation of the yeast enzyme on the stability of the transition state generated from free OMPDC and OMP (5.7 kcal/mol) is similar to the effect of the mutation on the transition state generated from free OMPDC, EO and phosphite (6.4 kcal/mol), so that the whole substrate and substrate in pieces react through similar transition states. The effect S154A mutation on the reaction of the pieces has been partitioned into a 3.2 kcal/mol effect on the reaction of EO alone, and a 3.1 kcal/mol effect on phosphite activation. The mutation reduces phosphite activation, even though there are apparently no direct interactions between the excised ‐CH2OH and the phosphate of OMP. We propose that dianion binding drives loop closure around the transition state, which serves to strengthen the network of hydrogen bonding interactions with the ‐CH2OH side chain.

Phosphate Binding Energy and Catalysis by Small and Large Molecules

Catalysis is an important process in chemistry and enzymology. The rate acceleration for any catalyzed reaction is the difference between the activation barriers for the uncatalyzed (Delta G(HO)(#)) and catalyzed (Delta G(Me)(#)) reactions, which corresponds to the binding energy (Delta G(S)(#) = Delta G(Me)(#)-Delta G(HO)(#)) for transfer of the reaction transition state from solution to the catalyst. This transition state binding energy is a fundamental descriptor of catalyzed reactions, and its evaluation is necessary for an understanding of any and all catalytic processes. We have evaluated the transition state binding energies obtained from interactions between low molecular weight metal ion complexes or high molecular weight protein catalysts and the phosphate group of bound substrate. Work on catalysis by small molecules is exemplified by studies on the mechanism of action of Zn2(1)(H2O). A binding energy of Delta G(S)(#) = -9.6 kcal/mol was determined for Zn2(1)(H2O)-catalyzed cleavage of the RNA analogue HpPNP. The pH-rate profile for this cleavage reaction showed that there is optimal catalytic activity at high pH, where the catalyst is in the basic form [Zn2(1)(HO-)]. However, it was also shown that the active form of the catalyst is Zn2(1)(H2O) and that this recognizes the C2-oxygen-ionized substrate in the cleavage reaction. The active catalyst Zn2(1)(H2O) shows a high affinity for oxyphosphorane transition state dianions and a stable methyl phosphate transition state analogue, compared with the affinity for phosphate monoanion substrates. The transition state binding energies, Delta G(S)(#), for cleavage of HpPNP catalyzed by a variety of Zn2+ and Eu3+ metal ion complexes reflect the increase in the catalytic activity with increasing total positive charge at the catalyst. These values of Delta G(S)(#) are affected by interactions between the metal ion and its ligands, but these effects are small in comparison with Delta G(S)(#) observed for catalysis by free metal ions, where the ligands are water. Enzymes are unique in having evolved mechanisms to effectively utilize binding interactions with nonreacting fragments of the substrate in stabilization of the reaction transition state. Orotidine 5'-monophosphate decarboxylase, alpha-glycerol phosphate dehydrogenase, and triosephosphate isomerase catalyze dissimilar decarboxylation, hydride transfer, and proton transfer reactions, respectively. Each enzyme derives ca. 12 kcal/mol of transition state stabilization from protein interactions with the nonreacting phosphate group, which is larger than the highest approximately 10 kcal/mol transition state stabilization that we have determined for small-molecule catalysis of phosphate diester cleavage in water. Each of these enzymes catalyze the slow reaction of a truncated substrate that lacks the phosphate group, and in each case, the reaction of the truncated substrate is strongly activated by the allosteric binding of the second substrate "piece" phosphite dianion, HPO3(2-). We propose a modular design for these enzymes with a classical active site that recognizes the reactive substrate fragment and a separate phosphodianion binding site. The second site is created, in part, by flexible protein loops that wrap around the substrate phosphodianion group and bury the substrate in an environment with an optimal local dielectric constant for the catalyzed reaction and with the most favorable positioning of the catalytic side chains. This design is easily generalized to a wide variety of enzyme-catalyzed reactions.

Enzymatic Catalysis of Proton Transfer at Carbon: Activation of Triosephosphate Isomerase by Phosphite Dianion

More than 80% of the rate acceleration for enzymatic catalysis of the aldose-ketose isomerization of (R)-glyceraldehyde 3-phosphate (GAP) by triosephosphate isomerase (TIM) can be attributed to the phosphodianion group of GAP [Amyes, T. L., O'Donoghue, A. C., and Richard, J. P. (2001) J. Am. Chem. Soc. 123, 11325-11326]. We examine here the necessity of the covalent connection between the phosphodianion and triose sugar portions of the substrate by "carving up" GAP into the minimal neutral two-carbon sugar glycolaldehyde and phosphite dianion pieces. This "two-part substrate" preserves both the alpha-hydroxycarbonyl and oxydianion portions of GAP. TIM catalyzes proton transfer from glycolaldehyde in D2O, resulting in deuterium incorporation that can be monitored by 1H NMR spectroscopy, with kcat/Km = 0.26 M-1 s-1. Exogenous phosphite dianion results in a very large increase in the observed second-order rate constant (kcat/Km)obsd for turnover of glycolaldehyde, and the dependence of (kcat/Km)obsd on [HPO32-] exhibits saturation. The data give kcat/Km = 185 M-1 s-1 for turnover of glycolaldehyde by TIM that is saturated with phosphite dianion so that the separate binding of phosphite dianion to TIM results in a 700-fold acceleration of proton transfer from carbon. The binding of phosphite dianion to the free enzyme (Kd = 38 mM) is 700-fold weaker than its binding to the fleeting complex of TIM with the altered substrate in the transition state (Kd = 53 muM); the total intrinsic binding energy of phosphite dianion in the transition state is 5.8 kcal/mol. We propose a physical model for catalysis by TIM in which the intrinsic binding energy of the substrate phosphodianion group is utilized to drive closing of the "mobile loop" and a protein conformational change that leads to formation of an active site environment that is optimally organized for stabilization of the transition state for proton transfer from alpha-carbonyl carbon.

Activation of Orotidine 5‘-Monophosphate Decarboxylase by Phosphite Dianion: The Whole Substrate is the Sum of Two Parts

We report that the binding of phosphite dianion to orotidine 5'-monophosphate decarboxylase (OMPDC) results in an 80 000-fold increase in kcat/Km for decarboxylation of the truncated substrate, 1-(beta-d-erythrofuranosyl)orotic acid (EO), which lacks a 5'-phosphodianion moiety. The intrinsic binding energy (IBE) of phosphite dianion in the transition state is 7.8 kcal/mol, which represents a very large fraction of the 11.8 kcal/mol IBE of the phosphodianion group of the natural substrate orotidine 5'-monophosphate (OMP). The data give kcat = 160 +/- 70 s-1 for turnover of EO in the active site of OMPDC containing phosphite dianion, which is significantly larger than kcat = 15 s-1 for turnover of OMP. Despite the weaker binding of the individual EO and HPO32- "parts" (KmKd = 0.014 M2) than of OMP (Km = 1.6 x 10-6 M), once bound, OMPDC provides a slightly greater stabilization of the transition state for reaction of the parts than of the whole substrate. Thus, the covalent connection between the reacting portion of the substrate and the nonreacting phosphodianion group is not necessary for efficient catalysis. This implies that a major role of the phosphodianion group of OMP is to provide binding interactions that are used to drive an enzyme conformational change, resulting in formation of an active site environment optimized for transition state stabilization.