Performance Test Research Articles

Synthesis, In vivo, and In silico Evaluation of New Pyrazoline-Benzothiazole Conjugates as Antiepileptic Agents.

New 2-(4-benzothiazol-2-yl-phenoxy)-1-(3,5-diphenyl-4,5-dihydro-pyrazol-1-yl)-ethanones (9a-o) have been designed and synthesized. All the synthesized compounds were characterized by thin layer chromatography and spectral analysis. The antiepileptic potential of the synthesized compounds has been tested by following standard animal screening models, including maximal electroshock (MES) and subcutaneous pentylenetetrazole (scPTZ) models. The neurotoxic and antidepression effects of the synthesized compounds were checked by utilizing rotarod apparatus, and motor impairment test (by actophotometer) respectively. The study concluded that compounds 9c, 9d, 9f, 9i, 9n, and 9o possessed good antiepileptic potential compared to standard drugs like carbamazepine and phenytoin. The results of the rotarod performance test also established them without any neurotoxicity. The motor impairment test revealed that the synthesized compounds are also good antidepressants. In-silico studies have been performed for calculation of pharmacophore pattern, prediction of pharmacokinetic properties which determine the eligibility of synthesized compounds as orally administered molecules and interactions with the target proteins. The result of in-silico studies reinforced results obtained by in vivo study of the synthesized compounds and their possible mechanism of antiepileptic action i. e. via inhibiting voltage-gated sodium channels (VGSCs) and gamma-aminobutyric acid-A receptor.

Ameliorative effect of nano-pregabalin in gastrocnemius muscle of gamma irradiated rats with an experimental model of fibromyalgia: Crosstalk of Sirt3, IL-1β and PARP1 pathways

BackgroundFibromyalgia (FM) is a complex syndrome with somatic symptoms connected to the operational state of muscles. Although radiotherapy is a cornerstone in cancer treatment, it is implicated in the aggravation of FM. Lately, formulation of medicines in nano-forms become of great prominence due to their prospective applications in medicine. So, this study aimed to assess possible therapeutic benefits of formulating pregabalin in a nono-form (N-PG) for managing FM during exposure to gamma radiation. MethodsGamma rays administered in fractionated doses (2 Gy/day) to male rats after one hour of s.c. injection of reserpine (1 mL/kg per day) to induce FM, then treated with single daily dose of (30 mg/kg, p.o.) PG or N-PG for ten successive days. Rats were subjected to behavioral tests, then sacrificed to obtain serum and gastrocnemius muscles. ResultsN-PG significantly antagonized reserpine-induced FM as proved by; the immobility and performance times in forced swim and rotarod performance tests, respectively were restored near to the normal time, serum IL-8 and MCP-1 chemokines were nearby the normal levels, mitigated oxidative stress through increasing total thiol, Sirt3, CAT enzyme and decreasing COX-1, inhibition of inflammation via IL-1β and MIF significant reduction, it possessed anti-apoptotic effect verified by decreasing PARP-1 and increasing Bcl-XL, gastrocnemius muscles had minimal fibrosis levels as seen after Masson trichrome staining. Histopathological results were coincidence with biochemical inspection. ConclusionThis study identifies N-PG as a novel drug that could be of a value in the management of FM particularly in cancer patients undergoing radiotherapy.

Heat transfer performance of the vapor chamber with spiral support-composite wick

Inefficient heat dissipation in vapor chambers (VCs) is a major challenge for their development and application. To investigate the effect of supports on VCs’ maximum thermal power and thermal resistance, the relationship between the number of supports and the vapor channel pressure drop is studied through pressure drop measurement. Composite Wick Vapor Chambers (CWVCs) with various supports are fabricated and tested with a constructed thermal performance test platform. The results indicate that the heat transfer performance of CWVC is related to the number of supports and the liquid filling ratio. The optimum filling ratio of the composite wick with 3-6 spiral supports (SS3-SS6) is 60%, 70%, 90%, and 70%, with corresponding maximum thermal power of 19.25 W, 25.61 W, 25.97 W, and 21.22 W. The thermal resistance of SS4-CWVC is lower overall. Additionally, when the power is 21 W, the surface temperature difference of the condenser of SS3-CWVC and SS6-CWVC is 2.3 °C and 1.3 °C, respectively. However, the condenser surface temperature difference of SS4-CWVC is 66.5% lower than that of SS3-CWVC and 40.8% lower than that of SS6-CWVC at the same power. Therefore, SS4-CWVC exhibits better temperature uniformity and has better heat transfer performance.

Efficient removal of U(VI) by graphene-based electrode modified with amidoxime: Performance and mechanism

The burgeoning interest in nuclear energy as a sustainable power source brings to the fore significant environmental and human health concerns associated with wastewater from uranium mining. This study presented the successful synthesis of amidoxime modified graphene-based electrode materials (PAO-N-rGO/CF) designed for treating uranium containing wastewater. The influencing factors of PAO-N-rGO/CF during the electrokinetic restoration process were systematically investigated, exploring the mechanisms of adsorption and electrochemical reduction from the perspectives of establishing adsorption theoretical models, evaluating electrochemical performance, and characterizing reduction products. According to the results, the optimal removal efficiency for U(VI) by PAO-N-rGO/CF reached 99.93 % under conditions of an applied voltage of 5 V, an electrification duration of 20 min, and a pH of 7. Compared to Ca2+, K+, and Mg2+, PAO-N-rGO/CF exhibited strong selectivity for UO22+. Whether dissolved oxygen was present or not, PAO-N-rGO/CF maintained its excellent electrochemical performance. After undergoing 10 cycles of reuse, the removal efficiency for U(VI) only decreased by 8.75 %. The establishment of the adsorption model demonstrated the presence of a chemical bond between uranium and amidoxime groups. The electrochemical performance tests evidenced that PAO-N-rGO/CF exhibited superior electron transfer capability. The reduction of (UO2)3(OH+)5 to UO2 in wastewater at a pH = 7 was verified by analysis of the reduction products. The successful development and mechanistic study of the novel and efficient electrode material provide theoretical support for the control of radioactive nuclide pollution and possess practical value for engineering applications in treating uranium containing wastewater.

A handheld rapid detector of soil total nitrogen based on phase-locked amplification technology

Soil total nitrogen (STN) serves as a critical indicator for agricultural productivity. Rapid STN detection is crucial for nutrient monitoring in farmland and for guiding precision fertilization. Traditional near-infrared spectroscopy-based STN detectors necessitate darkrooms or subterranean settings to negate ambient light interference, restricting their practical use. This study develops a handheld rapid STN detector employing phase-locked amplification technology to address this issue. The device comprises optical, circuit, and control units. The optical unit features a ring-shaped split fiber structure to mitigate soil surface irregularities’ effects on the signal, with a central InGaAs photodiode for signal reception. Eight wavelengths (970 nm, 1050 nm, 1085 nm, 1200 nm, 1300 nm, 1450 nm, 1550 nm, and 1600 nm) are selected for the light sources through an information theory optimized genetic algorithm. The circuit unit employs direct digital synthesis and operational amplifiers for light signal generation and modulation. Reflected soil light signals are demodulated using an InGaAs photodiode and a phase-locked amplifier, effectively filtering ambient light noise. The control unit integrates an STM32F103C8T6 microcontroller and a Raspberry Pi 4B. The STM32 microcontroller manages signal generation, channel selection, frequency control, A/D conversion, and display, while the Raspberry Pi handles data processing, uploading, and transmission. A BP neural network model optimized by genetic algorithms is embedded for real-time STN data acquisition. Cloud-based data storage and visualization are facilitated through the Alibaba Cloud IoT platform. Performance testing reveals the device’s stability and interference resistance, with a standard deviation of electrical signal under varying light conditions below 3 mV. Compared to commercial spectrometers, the correlation coefficient (r) for reflectance data at eight wavebands exceeds 0.9. Accuracy testing shows an R2 above 0.8 and an RMSE of 0.30 g/kg when comparing detector-obtained STN values with standard chemical methods. These results demonstrate the detector’s efficacy in ambient light isolation, stability, and accuracy in agricultural settings, offering technical support for variable fertilization in precision farming.

Add-On Bifidobacterium Bifidum Supplement in Children with Attention-Deficit/Hyperactivity Disorder: A 12-Week Randomized Double-Blind Placebo-Controlled Clinical Trial.

We conducted a 12-week randomized double-blind placebo-controlled clinical trial to investigate the potential impact of Bifidobacterium bifidum (Bf-688) supplementation on attention-deficit/hyperactivity disorder (ADHD). Children with ADHD who were already receiving a stable dose of methylphenidate (MPH) treatment were enrolled and were randomly assigned to two groups: one receiving add-on Bf-688 (daily bacterial count of 5 × 109 CFUs) (n = 51) and the other receiving a placebo (n = 51). All participants underwent assessments using Conners' Continuous Performance Test (CPT) and Conners' Continuous Auditory Test of Attention (CATA). Additionally, fecal samples were collected at the beginning of the trial (week 0) and at the endpoint (week 12). Remarkably, the group receiving Bf-688 supplementation, but not the placebo group, exhibited significant improvements in omission errors in CPT as well as Hit reaction time in both CPT and CATA. Gut microbiome analysis revealed a significant increase in the Firmicutes to Bacteroidetes ratio (F/B ratio) only in the Bf-688 group. Furthermore, we identified significant negative correlations between N-Glycan biosynthesis and Hit reaction time in both CPT and CATA. Our results demonstrate that the probiotic Bf-688 supplement can enhance neuropsychological performance in children with ADHD, possibly by altering the composition of the gut microbiota, ultimately leading to reduced N-Glycan biosynthesis.

Conversion of cobalt from spent LIBs to Co3O4 electrode material for application in supercapacitors

ABSTRACT The cathode material of lithium-ion batteries (LIBs) is endowed with valuable metals, such as cobalt. The improper treatment of these batteries pollutes the environment and causes enormous resource waste. Therefore, the recovery of valuable metals from spent LIBs has attracted widespread attention. In this study, Co3O4 electrode materials were prepared by a simple homogeneous precipitation method and heat treatment using a leaching solution of spent LIBs-positive electrode material as the cobalt source. The crystal structure and morphology of the products were examined at different annealing temperatures, and their electrochemical performance was analyzed. The results show that low-temperature annealing contributes to grain refinement. The Co3O4 material prepared at 300°C annealing temperature has a rod-like structure with distinct pores and a specific surface area of 58.98 m2 g−1. Furthermore, electrochemical performance testing reveals that Co3O4 prepared at 300°C displays the best electrochemical performance as an electrode material, with a specific capacitance of 97.93 F g−1 and a cycle retention rate of 79.12% after 500 charge–discharge cycles. These findings demonstrate the feasibility of recycling valuable metal cobalt from spent LIBs cathode materials to produce Co3O4 materials for use as supercapacitor electrode materials, opening up new avenues for the recycling and utilisation of spent LIBs.

Effects of recrystallization on interfacial microstructure evolution and shear strength of TiAl alloy joints

The effects of dynamic recrystallization (DRX) and post-bonding heat treatment (PBHT) on the interfacial microstructure evolution and mechanical properties enhancement of Ti-43Al-4Nb-1Mo-0.2B alloy joints, subjected to various bonding parameters, were thoroughly investigated through detailed microstructural characterization and shear performance tests. A strip-like DRX area was observed at the interface when bonding at 1100 °C, ≥30 MPa, for 60 min. Equiaxial- γ grains underwent discontinuous dynamic recrystallization during the bonding process, and tended to form flat grains parallel to the lamellae direction during recrystallization annealing (1000 °C/6 h) owing to the hindrance imposed by the lamellae on both sides. The orientations of lamellae on the both sides of bonding interface affects the lamellae's stress distribution and deformation behavior at the bonding interface, subsequently influencing the DRX behavior and the width of the DRX zone. Static recrystallization (SRX) during the recrystallization annealing treatment can eliminate bonding defects of joints bonding at lower pressures or temperatures. Optimal joints with fully lamellar interfacial microstructure and excellent shear properties can be obtained through single-α phase annealing treatment. Lamellae microstructure tailored through PBHT can significantly enhance the quality of joints, attributed to the homogeneity of the microstructure between the interface and matrix. The highest shear strength of 478 MPa, accounting for 82 % of the matrix strength, was obtained under the bonding parameters of 1100 °C/30 MPa/60 min-1290 °C/15 min. This work provides important DB process parameters for fabricating of complex structural parts of TiAl alloy.

Enhanced UA (University of Arizona) tire model for computationally efficient and stable multibody simulations

Multibody simulations are widely used to study the dynamic behaviour of road vehicles, requiring the representation of the tire-road contact forces. The UA tire model, developed by Gim and Nikravesh, is a physical model that requires the selection of few parameters, which are easily obtained without the need of extensive testing. However, the analytical formulas of the UA tire model imply force discontinuities that are challenging in multibody simulations, affecting the numeric time integration of the accelerations and velocities, and consequently, the simulation stability and efficiency. This work proposes an enhanced UA tire model by smoothing such force discontinuities. For the purpose, the kinematic conditions that imply discontinuities are identified and a cubic smoothing function is applied. Simulation results highlight the discontinuities in the lateral force and self-aligning moment when using the original UA tire model. The use of the enhanced model within multibody simulations is significantly more efficient, without affecting the quality of the results or modifying the range of applications of the original tire model. The performance of the enhanced UA tire model is demonstrated with the tire model performance test (TMPT), which is used for the international benchmark test of tire models.

Seasonal Variations in Performance and Asymmetry Data for Jump and Change of Direction Abilities in Female Soccer Players.

Mainer-Pardos, E, Bishop, C, and Gonzalo-Skok, O. Seasonal variations in performance and asymmetry data for jump and change of direction abilities in female soccer players. J Strength Cond Res XX(X): 000-000, 2024-The study aimed to evaluate the progression of the percentage-based change of direction (COD) deficit (%CODD) over a competitive season, along with its correlation with performance tests and to examine the impact of the magnitude and direction of asymmetry at 4 stages of the season. Forty-seven (U-16, U-18, and U-20), highly trained, female soccer players performed unilateral vertical jumping (countermovement jump [CMJ]) and horizontal jumping (HJ), 10-m sprint, and 180° change of direction (COD180) tests. The %CODD was also calculated. Significant group and time effects (p < 0.05) were observed in CMJ, HJ, 10-m sprint, and COD180 tests, with U-20 players generally outperforming the U-18 and U-16 groups. Nonsignificant differences were reported in the %CODD between any time point or groups throughout the season. Moderate or large significant (r = 0.44-0.64; p < 0.05) relationships were found between %CODD and 10 m. The direction of asymmetry within and between tests at all time points was slight to moderate (k = -0.29 to 0.57). Notwithstanding, 51% of the players showed the best performance in the horizontal jump with the same leg throughout the season, whereas only 36% in %CODD. This study highlights the importance of developing strategies to improve %CODD depending on the player's position demands. Finally, individually monitoring the magnitude and direction of asymmetry can help practitioners monitor the effects of training and competition throughout the season.

Validity and Reliability of the Power Slap Board as an Application to Measure Upper Body Vertical Pulling Power for Female Water Polo Players.

Lim, C, Wee, J, Lee, M, Lim, S, and Leow, S. Validity and reliability of the power slap board as an application to measure upper body vertical pulling power for female water polo players. J Strength Cond Res XX(X): 000-000, 2024-This study examined the validity and reliability of the power slap test (PS) as an assessment for upper body pulling power to predict water polo functional performance and competitive experience of female water polo players. Seventeen female water polo players from the national and development squads were recruited. Subjects completed test-retest sessions of PS testing and 1 session of functional performance tests for the 15-m arms-only sprint (15 mAOS) and the 5-m maximum shooting velocity (5 mMSV). All PS, 15 mAOS and 5 mMSV results were compared for predictability. Power slap scores demonstrated high reliability for left PS (intraclass correlations [ICC]: 0.96, 90% confidence interval [CI]: 0.91-0.98), right PS (ICC: 0.96, 90% CI: 0.90-0.98), left and right center of mass (COM) displacement (ICC: 0.98, 90% CI: 0.96-0.99; ICC: 0.95, 90% CI: 0.88-0.98), and summed PS (ICC: 0.96, 90% CI: 0.92-0.99). All absolute PS scores and left COM displacement (COMdispL) demonstrated large correlations with the 15 mAOS times (r = -0.542 to -0.52, r2 = 0.27-0.29, p < 0.05). No performance parameters of the PS were correlated with the 5 mMSV performance (p > 0.05). This study validates the reliability of the PS as a dryland assessment tool for upper body pulling power. Only absolute PS scores and COMdisp were validated as weak predictors of the arms-only sprint times over 15 m. Its predictive power significantly improved when considered in combination with shooting performance. All absolute and normalized kinetic and kinematic PS parameters did not predict functional performance and competitive experience.

Preparation of p-isopropylphenol polyoxyethylene ether and evaluation of its performance in concrete

P-isopropenylphenol polyoxylates (IPP-PE) were obtained by alkoxylation reaction using p-isopropylphenol phenol (IPP) and ethylene oxide (EO) as raw materials, and P-PCE polycarboxylic acid superplasticizer was obtained by free radical polymerization of ipp-PE and acrylic acid (AA) under the action of initiator and chain transfer agent. The effects of reaction temperature, acid-ether ratio, amount of chain transfer agent and initiator, and reaction time on the dispersion properties of superplasticizer were studied, and the molecular structure and microscopic morphology of the superplasticizer were characterized by FTIR,1HNMR, and SEM, and the influence of superplasticizer on concrete properties was evaluated by concrete performance tests. The test results determined that the optimal synthesis process of polycarboxylic acid superplasticizer was as follows: reaction temperature 40 °C, n(AA):n(IPP-PE)=6:1, chain transfer agent and initiator were 0.4% and 0.6% of the mass of large monomer, respectively, and the reaction time was 4.5h. The experimental results of the concrete performance test showed that the workability of concrete mixed with the self-made superplasticizer was excellent, and the initial and 1h longitudinal flowability of the superplasticizer reached 228 mm and 215 mm, respectively. The water reduction rate reached 36%, the 28d compressive strength reached 56.8 MPa, the initial slump reached 226 mm, and it had a certain retarding and air entrainment effect.

Surface Plasmon Resonance Sensor Based on Fe2O3/Au for Alcohol Concentration Detection.

Hematite (α-Fe2O3) is widely used in sensor sensitization due to its excellent optical properties. In this study, we present a sensitivity-enhanced surface plasmon resonance alcohol sensor based on Fe2O3/Au. We describe the fabrication process of the sensor and characterize its structure. We conduct performance testing on sensors coated multiple times and use solutions with the same gradient of refractive indices as the sensing medium. Within the refractive index range of 1.3335-1.3635, the sensor that was coated twice achieved the highest sensitivity, reaching 2933.2 nm/RIU. This represents a 30.26% enhancement in sensitivity compared to a sensor with a pure gold monolayer film structure. Additionally, we demonstrated the application of this sensor in alcohol concentration detection by testing the alcohol content of common beverages, showing excellent agreement with theoretical values and highlighting the sensor's potential in food testing.

The Utility of a Novel Neuropsychological Measurement to Analyze Event-Related Attentional Behaviors among Young Children with Attention Deficit Hyperactivity Disorder-a Pilot Study.

The identification and diagnosis of children with attention deficit hyperactivity disorder (ADHD) traits is challenging during the preschool stage. Neuropsychological measures may be useful in early assessments. Furthermore, analysis of event-related behavior appears to be an unmet need for clinical treatment planning. Conners' Kiddie Continuous Performance Test (K-CPT) is the most popular well-established neuropsychological measurement but lacks event markers to clarify the heterogeneous behaviors among children. This study utilized a novel commercially available neuropsychological measure, the ΣCOG, which was more game-like and provided definite event markers of individual trial in the test. Thirty-three older preschool children (14 were diagnosed with ADHD, mean age: 66.21 ± 5.48months; 19 demonstrated typical development, mean age: 61.16 ± 8.11months) were enrolled and underwent comprehensive medical and developmental evaluations. All participants underwent 2 versions of neuropsychological measures, including the K-CPT, Second Edition (K-CPT 2) and the ΣCOG, within a short interval. The study indicated the omissions and response time scores measured in this novel system correlated with clinical measurement of the behavioral scales in all participants and in the group with ADHD; additionally, associations with the traditional K-CPT 2 were observed in commissions and response time scores. Furthermore, this system provided a within-task behavioral analysis that identified the group differences in the specific trial regarding omission and commission errors. This innovative system is clinically feasible and can be further used as an alternative to the K-CPT 2 especially in research by revealing within-task event-related information analysis.

Multi-lens component used for a LWIR field-integral gas spectral imager

This paper reports a miniature multi-lens component used for a LWIR field-integral gas spectral imager. The component is designed for crosstalk minimization and consists of a 4∗3 array of micro-lenses and a detector. To reduce the cost, the detector is uncooled and the optical parameters of the 12 micro-imaging lenses are identical. These include 3.38 mm focal length and 35° field-of-view. The F/# is designed to be 1.2 to increase the luminous flux of the imager. After image quality evaluation and tolerance analysis, the micro-imaging lens has good imaging quality, is insensitive to tolerances, and is easy to fabricate. To enhance the environmental stability of the component, a temperature control system was designed to depress the temperature drift. In addition, the athermalization of the micro-imaging lens was beneficial. The performance test of the component shows that the NETD of the 12 micro-imaging lenses is less than 90 mK and most of them are less than 65 mK, and an image of an ethylene gas cloud observed by the component is also shown. The component has been integrated to the spectral imagers, and crosstalk is analyzed.

Investigating the relationship between multiple sclerosis disability and driving performance: A comparative study of the multiple sclerosis functional composite and expanded disability status scale

IntroductionMultiple Sclerosis (MS) can affect the ability to perform complex tasks such as driving. The Expanded Disability Status Scale (EDSS) overlooks cognitive deficits crucial for driving. We investigated the relationship between the Multiple Sclerosis Functional Composite (MSFC), which includes cognitive assessment, and EDSS in relation to driving performance. Methods: This exploratory study involved 30 MS patients (mean EDSS 2.4 ± 2.0) and 15 healthy controls. We correlated the results of the EDSS, MSFC, and driving performance tests, namely the Two-Hand Coordination Test (2HAND) and the Speed Anticipation Reaction Test (SART). ResultsPatients did not differ from the healthy controls regarding age, sex, and driving experience. However, they exhibited lower mean Z-scores in MSFC, particularly in motor domains, but not in cognitive function. The mean Z-score for the 25-foot Walk test was −0.42 in patients compared to −0.04 in controls. For the 9-hole Peg Test, it was 0.17 in patients versus 1.47 in controls. Patients had a mean total error time of 19.7 seconds for both hands in the 2HAND test, compared to 7.7 seconds in controls. In MS patients, the MSFC and EDSS significantly correlated with SART and 2HAND components. While upper limb function (9-HPT) did not correlate with 2HAND, cognitive function (PASAT) did correlate with the number of 2HAND errors, indicating that cognitive dysfunction impacts driving performance more than physical dysfunction. ConclusionThe MSFC may provide valuable insights into the driving abilities of MS patients, potentially offering advantages over the EDSS in predicting driving performance. Further research with larger, more diverse populations across various driving environments is necessary to validate these findings.

Second phase and matrix texture evolution influence mechanical properties of Al-Mg-Al composite plate by HPR with annealing temperature

Annealing treatment can determine the quality of heterogeneous composite plate by regulating the matrix and interface structures and interlayer bonding ability. Al-Mg-Al composite plate was used as an example. Al-Mg-Al composite plate was rolled with 50 % reduction by hard plate rolling. After that, it was annealed at 250 ℃, 300 ℃, 350 ℃ and 400 ℃ for one hour respectively. Through microstructure observation and performance test, the results show that the reaction phases of Al3Mg2 and Al12Mg17 were formed at the interface during annealing treatment. As the temperature continued to climb, yield strength and elongation after fracture of Al-Mg-Al composite plate showed a trend of increasing first and then decreasing, in addition, the tensile strength gradually decreased. As temperature reached 300 °C, its performance reached the best, the tear strength increased to 0.367 KN, and yield strength and elongation reached 172 MPa and 14.5 %, respectively. The study showed that although annealing temperature didn't change types of texture configuration of magnesium alloy, it affected the grain growth, resulting in the change of base surface texture and the overall performance of heterogeneous composite plate. This research provides a theoretical basis for precise regulation of microstructure and comprehensive performance of heterogeneous composite plate by annealing treatment.

The Effects of a School-Based Physical Activity Program on Physical Fitness in Egyptian Children: A Pilot Study from the DELICIOUS Project.

Ensuring the physical fitness of Egyptian children is of paramount importance to their overall well-being, given the unique socio-cultural and educational barriers they face that may hinder their active participation. As part of the DELICIOUS project, the "Be Fit Program" aims to increase the level of physical fitness among Egyptian school-aged children. This study explores the effectiveness of a structured, six-week physical activity (PA) program in improving various facets of physical fitness in children, including body composition, speed, coordination, muscular strength, and cardiovascular endurance. With the increasing prevalence of sedentary lifestyles, such efforts are imperative to improve overall health outcomes. A cohort of 125 children, aged 8.50 to 12.25 y (mean age 10.19 ± 1.03 y), participated in the study. Their body composition, speed, coordination, strength, and aerobic fitness were assessed before and after the Be Fit Program using the revised International Physical Performance Test Profile. Paired t-tests were used to detect changes between the pre- and post-tests. Following the six-week intervention, statistical analyses revealed significant improvements in coordination and lower body strength (p < 0.01). Aerobic endurance showed marginal improvements, approaching statistical significance (p = 0.06). Conversely, there were no statistically significant changes in body composition, speed, or upper body strength (p > 0.05). The study confirms that tailored, non-competitive physical activities can positively influence specific fitness components in Egyptian children. However, achieving holistic improvements across all targeted fitness domains may require further strategic adjustments or a longer program duration. This pilot study underscores the importance of culturally tailored, school-based PA programs and highlights the continued need for research and program refinement to comprehensively improve children's fitness in the Egyptian context.

The new methodoly of performance testing for young horses of sport breeds

The new methodoly of performance testing for young horses of sport breeds

Open-Set Sheep Face Recognition in Multi-View Based on Li-SheepFaceNet

Deep learning-based sheep face recognition improves the efficiency and effectiveness of individual sheep recognition and provides technical support for the development of intelligent livestock farming. However, frequent changes within the flock and variations in facial features in different views significantly affect the practical application of sheep face recognition. In this study, we proposed the Li-SheepFaceNet, a method for open-set sheep face recognition in multi-view. Specifically, we employed the Seesaw block to construct a lightweight model called SheepFaceNet, which significantly improves both performance and efficiency. To enhance the convergence and performance of low-dimensional embedded feature learning, we used Li-ArcFace as the loss function. The Li-SheepFaceNet achieves an open-set recognition accuracy of 96.13% on a self-built dataset containing 3801 multi-view face images of 212 Ujumqin sheep, which surpasses other open-set sheep face recognition methods. To evaluate the robustness and generalization of our approach, we conducted performance testing on a publicly available dataset, achieving a recognition accuracy of 93.33%. Deploying Li-SheepFaceNet on an open-set sheep face recognition system enables the rapid and accurate identification of individual sheep, thereby accelerating the development of intelligent sheep farming.