Peptide Probe Research Articles

Peptide Probe for Multiwalled Carbon Nanotubes: Electrophoretic Assessment of the Binding Interface and Evaluation of Surface Functionalization

Noncovalent interactions of peptides and proteins with carbon nanotubes play a key role in sensing, dispersion, and biocompatibility. Advances in these areas require that the forces which contribute to physical adsorption are understood in order that the carbon nanotubes present a degree of functionalization appropriate to the desired application. Affinity analyses of peptides are employed to evaluate the role of tryptophan and arginine residues in physical adsorption to carboxylated multiwalled carbon nanotubes. Peptides containing arginine and tryptophan, WR(W) n, are used with affinity capillary electrophoresis to identify factors that lead to the formation of peptide-carbon nanotube complexes. The effects of changing the amino acid composition and residue length are evaluated by measuring dissociation constants. Electrostatic interactions contribute significantly to complexation, with the strongest interaction observed using the peptide WRWWWW and carboxylated carbon nanotube. Stronger interaction is observed when the tryptophan content is successively increased as follows: WR(W)4 > WR(W)3 > WR(W)2 > WRW > WR. However, as observed with polytryptophan (W5, W4, W3, and W2), removing the arginine residue significantly reduces the interaction with carbon nanotubes. Increasing the arginine content to WRWWRW does not improve binding, whereas replacing the arginine residue in WRWWWW with lysine (WKWWWW) reveals that lysine also contributes to surface adsorption, but not as effectively as arginine. These observations are used to guide a search of the primary sequence of lysozyme to identify short regions in the peptide that contain a single cationic residue and two aromatic residues. One candidate peptide sequence (WMCLAKW) from this search is analyzed by capillary electrophoresis. The dissociation constant of carboxylated multiwalled carbon nanotubes is measured for the peptide, WMCLAKW, to demonstrate the utility of affinity capillary electrophoresis analysis.

An Integrated Approach Based on a DNA Self-Assembly Technique for Characterization of Crosstalk among Combinatorial Histone Modifications.

Combinatorial histone post-translational modifications (HPTMs) form a complex epigenetic code that can be decoded by specific binding proteins, termed as readers. Their specific interplays have been thought to determine gene expression and downstream biological functions. However, it is still a big challenge to analyze such interactions due to various limitations including rather weak, transient, and complicated interactions between HPTMs and readers, the high dynamic property of HPTMs, and the low abundance of reader proteins. Here we sought to take advantage of DNA-templated and photo-cross-linking techniques to design a group of combinatorial histone PTM peptide probes for the identification of multivalent interactions among histone PTMs and readers. By use of trimethylation on histone H3K4 (H3K4me3) and phosphorylation on H3T3, we demonstrated that this approach can be successfully utilized for identification of the PTM crosstalk on the same histone. By use of H3K4me3 and acetylation on H4K16, we showed the potential application of the probe in the multivalent interactions among PTMs on different histones. Thus, this new chemical proteomics tool combined with mass spectrometry holds a promising potential in profiling of the readers of combinatorial HPTMs and characterization of crosstalk among multiple PTMs on histones and can be adapted for broad biomedical applications.

A hydrogel biosensor for high selective and sensitive detection of amyloid-beta oligomers.

BackgroundAlzheimer’s disease (AD) is a neurodegenerative disorder characterized by progressive cognitive and memory impairment. It is the most common neurological disease that causes dementia. Soluble amyloid-beta oligomers (AβO) in blood or cerebrospinal fluid (CSF) are the pathogenic biomarker correlated with AD.MethodsA simple electrochemical biosensor using graphene oxide/gold nanoparticles (GNPs) hydrogel electrode was developed in this study. Thiolated cellular prion protein (PrPC) peptide probe was immobilized on GNPs of the hydrogel electrode to construct an AβO biosensor. Electrochemical impedance spectroscopy was utilized for AβO analysis.ResultsThe specific binding between AβO and PrPC probes on the hydrogel electrode resulted in an increase in the electron-transfer resistance. The biosensor showed high specificity and sensitivity for AβO detection. It could selectively differentiate AβO from amyloid-beta (Aβ) monomers or fibrils. Meanwhile, it was highly sensitive to detect as low as 0.1 pM AβO in artificial CSF or blood plasma. The linear range for AβO detection is from 0.1 pM to 10 nM.ConclusionThis biosensor could be used as a cost-effective tool for early diagnosis of AD due to its high electrochemical performance and bionic structure.

In vitro selection of electrochemical peptide probes using bioorthogonal tRNA for influenza virus detection.

An electrosensitive peptide probe has been developed from an in vitro selection technique using biorthogonal tRNA prepared with an electroreactive non-natural amino acid, 3,4-ethylenedioxythiophene-conjugated aminophenylalanine. The selected probe quantitatively detected the influenza virus based on a signal "turn-on" mechanism. The developed strategy could be used to develop electrochemical biosensors toward a variety of targets.

Influence of amino acid sequence in a peptidic Cu+-responsive luminescent probe inspired by the copper chaperone CusF.

Copper(i) is a soft metal ion that plays an essential role in living organisms and Cu+-responsive probes are required to detect Cu+ ions in physiological conditions and understand its homeostasis as well as the diseases associated with its misregulation. In this article, we describe a series of cyclic peptides, which are structurally related to the copper chaperone CusF, and that behave as Cu+-repsonsive probes. These peptide probes comprise the 16-amino acid loop of CusF cyclized by a β-turn inducer dipeptide and functionalized by a Tb3+ complex for its luminescence properties. The mechanism of luminescence enhancement relies on the modulation of the antenna effect between a tryptophan residue and the Tb3+ ion within the probe when Cu+ forms a cation-π interaction with the tryptophan. Here, we investigate the influence of the amino acid sequence of these cyclic peptides on the copper-induced modulation of Tb3+ emission and show that the rigid β-turn inducer Aib-d-Pro and insertion of the Tb3+ complex close to its tryptophan antenna are required to obtain turn-on Cu+ responsive probes. We also show that the amino acid sequence, especially the number and position of proline residues has a significant impact on metal-induced luminescence enhancement and metal-binding constant of the probes.

Screening of peptide probe binding to particulate matter with a high metal content.

Particulate matter (PM) is becoming an increasing health concern and there is a need to develop detection methods to keep its harmful effects in check. Generation of reactive oxygen species (ROS) by PM is often associated with metal compounds, hence our aim is to screen for a peptide probe towards improved collection and the detection of PM having a high metal content. Peptides are putative recognition molecules due to their versatility and ease of modification to enhance their binding selectivities. PM binding peptides were screened using the peptide array and different binding behaviors in terms of different spot colors (yellow, mixed and gray), indicating the different composition of bound PMs, were observed. The strongest binding peptides were identified as follows: NHVNTNYYPTLH (gray), NGYYPHSHSYHQ (mixed) and HHLHWPHHHSYT (yellow), with relative binding ratios of 125%, 144% and 136%, in comparison with WQDFGAVRSTRS, a peptide screened from a phage display in our previous study. Inductively coupled plasma mass spectrometry (ICPMS) analyses revealed that Co, Ni and Zn content in the PM bound to the HHLHWPHHHSYT peptide spot were respectively 12.5, 15.8 and 7.8 times that of the PM bound to no peptide spot, suggesting this peptide probe is applicable to collect PM with a high metal content.

Use of a leukocyte-targeted peptide probe as a potential tracer for imaging the tuberculosis granuloma

Granulomas are the histopathologic hallmark of tuberculosis (TB), both in latency and active disease. Diagnostic and therapeutic strategies that specifically target granulomas have not been developed. Our objective is to develop a probe for imaging relevant immune cell populations infiltrating the granuloma. We report the binding specificity of Cyanine 3 (Cy3)-labeled cFLFLFK-PEG12 to human leukocytes and cellular constituents within a human in vitro granuloma model. We also report use of the probe in in vivo studies using a mouse model of lung granulomatous inflammation. We found that the probe preferentially binds human neutrophils and macrophages in human granuloma structures. Inhibition studies showed that peptide binding to human neutrophils is mediated by the receptor formyl peptide receptor 1 (FPR1). Imaging the distribution of intravenously administered cFLFLFK-PEG12-Cy3 in the mouse model revealed probe accumulation within granulomatous inflammatory responses in the lung. Further characterization revealed that the probe preferentially associated with neutrophils and cells of the monocyte/macrophage lineage. As there is no current clinical diagnostic imaging tool that specifically targets granulomas, the use of this probe in the context of latent and active TB may provide a unique advantage over current clinical imaging probes. We anticipate that utilizing a FPR1-targeted radiopharmaceutical analog of cFLFLFK in preclinical imaging studies may greatly contribute to our understanding of granuloma influx patterns and the biological roles and consequences of FPR1-expressing cells in contributing to disease pathogenesis.

A graphene oxide nanosensor enables the co-delivery of aptamer and peptide probes for fluorescence imaging of a cascade reaction in apoptotic signaling.

Cytochrome c (Cyt c) and caspase-3 are the key mediators in apoptotic signaling. As is known to all, the release of Cyt c from mitochondria is a vital caspase activation pathway and defines the point of no-return in cell apoptosis. However, it has not been reported that any fluorescence imaging tools could allow simultaneous visualization of Cyt c translocation and caspase-3 activation in apoptotic cells. Here, we develop a sensitive nanosensor that holds the capability of imaging of the released Cyt c from the mitochondria and a caspase-3 activation cascade reaction in apoptotic signaling. The nanosensor is constructed by the assembly of a fluorophore (Cy5)-tagged DNA aptamer on graphene nanosheets that have been covalently immobilized with a FAM-labeled peptide. After a spatially selective delivery into the cytoplasm, the Cy5-tagged DNA aptamer assembled on the nanosensor can bind with Cyt c released from the mitochondria to the cytoplasm and dissociate from graphene, triggering a red fluorescence signal. In addition, the caspase-3 activated by the Cyt c released to the cytoplasm can cleave the FAM-labeled peptide and result in a green fluorescence output. The nanosensor exhibits rapid response, high sensitivity and selectivity for in vitro assays, and high contrast imaging of Cyt c and caspase-3 in living cells. It also provides the method for the study of the kinetic relationship between the Cyt c translocation and caspase-3 activation through simultaneous imaging of Cyt c and caspase-3. The developed nanosensor described here will be an efficient and potential platform for apoptosis research.

Detection of chymase activity using a specific peptide probe conjugated onto gold nanoparticles.

Gold nanoparticles (AuNPs) can be applied in biosensors using fluorescence resonance energy transfer (FRET) technique. Based on this technique, we have established a sensitive and efficient biosensing method by modifying a peptide-probe onto AuNPs to detect proteinase enzyme activity in this study. This biosensing method was designed for chymase activity detection and applied in kidney disease diagnosis. In this study, 16 nm-AuNPs were used to construct the AuNPs-based fluorescence peptide probe (named AuNPs-peptide probe) for chymase activity determination. The peptide sequence is FITC-Acp-DRVYIHPFHLDDDDDC, which comprises a fluorophore at the N-terminal end, an enzyme (chymase) substrate (DRVYIHPFHL), a spacer (DDDDD) and cysteine (C) to conjugate to AuNPs surface. When the enzyme catalyzes the substrate sequence, the fluorophore drifts away from AuNPs and the fluorescence emitting signal can be excited at 495 nm and detected at 515 nm. The results indicate that the time required for the AuNPs-peptide probe for activity detection of chymase was only 15 min, and a linear correlation from 10 to 100 ng mL−1 of chymase was acquired. The chymase reaction would be significantly inhibited by addition of specific chymase inhibitor chymostatin. The AuNPs-peptide probe was tested for the detection of high concentrations of trypsin and chymotrypsin, but only minor emitted fluorescence intensity was detected. According to these results, sensitivity and specificity of the AuNPs-peptide probe for chymase detection have been confirmed. AuNPs-peptide probe was successfully used for the detection of renal chymase activity; and the results indicate the pathogenically increased chymase activity in kidney tissue of nephropathic mice from aristolochic acid I treatment.

Correction: In vitro selection of electrochemical peptide probes using bioorthogonal tRNA for influenza virus detection

Correction for 'In vitro selection of electrochemical peptide probes using bioorthogonal tRNA for influenza virus detection' by Tara Bahadur K. C. et al., Chem. Commun., 2018, 54, 5201-5204.

UV Photodissociation Mass Spectrometry Accurately Localize Sites of Backbone Deuteration in Peptides.

Hydrogen/deuterium exchange mass spectrometry (HDX-MS) is now a routinely used technique to inform on protein structure, dynamics, and interactions. Localizing the incorporated deuterium content on a single residue basis increases the spatial resolution of this technique enabling detailed structural analysis. Here, we investigate the use of ultraviolet photodissociation (UVPD) at 213 nm to measure deuterium levels at single residue resolution in HDX-MS experiments. Using a selectively labeled peptide, we show that UVPD occurs without H/D scrambling as the peptide probe accurately retains its solution-phase deuterium labeling pattern. Our results indicate that UVPD provides an attractive alternative to electron mediated dissociation for increasing the spatial resolution of the HDX-MS experiment, capable of yielding high fragmentation efficiency, high fragment ion diversity, and low precursor ion charge-state dependency.

Novel peptide probes to assess the tensional state of fibronectin fibers in cancer

Transformations of extracellular matrix (ECM) accompany pathological tissue changes, yet how cell-ECM crosstalk drives these processes remains unknown as adequate tools to probe forces or mechanical strains in tissues are lacking. Here, we introduce a new nanoprobe to assess the mechanical strain of fibronectin (Fn) fibers in tissue, based on the bacterial Fn-binding peptide FnBPA5. FnBPA5 exhibits nM binding affinity to relaxed, but not stretched Fn fibers and is shown to exhibit strain-sensitive ECM binding in cell culture in a comparison with an established Fn-FRET probe. Staining of tumor tissue cryosections shows large regions of relaxed Fn fibers and injection of radiolabeled 111In-FnBPA5 in a prostate cancer mouse model reveals specific accumulation of 111In-FnBPA5 in tumor with prolonged retention compared to other organs. The herein presented approach enables to investigate how Fn fiber strain at the tissue level impacts cell signaling and pathological progression in different diseases.

A peptide-based near-infrared fluorescence probe for dynamic monitoring senile plaques in Alzheimer’s disease mouse model

In vivo monitoring neuropathological changes in Alzheimer’s disease (AD) animal model is critical for drug development. Here, by integrating blood-brain barrier penetrable peptide, we have developed a peptide probe which based on angiopep-2. Angiopep-based probe exhibited high binding affinity to Aβ aggregates and labeled senile plaques in vivo. Remarkably, the in vivo near-infrared imaging data revealed that fluorescence signals of this probe were nearly 3-fold higher in the brains of 16-month-old APP/PS1 transgenic mice compared to C57 mice and exhibited linear correlation with the senile plaques load process in 4-, 8-, 16-month-old APP/PS1 transgenic mice. Moreover, senile plaques load was detected in vivo as early as 4 months of age that even at the very beginning of plaques developed in APP/PS1 transgenic mice. Taken together, this novel peptide-based probe achieved dynamic monitoring senile plaques in APP/PS1 transgenic mice and have been ready to use in drug development in AD mouse model.

Peptide self-assembly assisted signal labeling for an electrochemical assay of protease activity.

Peptide self-assembly holds tremendous promise for a range of applications in chemistry and biology. In the work reported here, we explored the potential functions of peptide self-assembly in electrochemical bioanalysis by developing a peptide self-assembly assisted signal labeling strategy for assaying protease activity. The fundamental principle of this assay is that target-protease-catalyzed specific proteolytic cleavage blocks self-assembly between the probe peptide and signal peptide, thus preventing the signal labeling of electroactive silver nanoparticles on the electrode surface, which in turn causes the electrochemical signal to decrease. Using trypsin as an example protease target, the linear range of this assay was found to be 1ng mL-1 to 100mg mL-1, and its detection limit was 0.032ng mL-1, which are better than the corresponding parameters for previously reported assays. Further experiments also highlighted the good selectivity of the assay method and demonstrated its usability when applied to serum samples. Therefore, this report not only introduces a valuable tool for assaying protease activity, but it also promotes the utilization of peptide self-assembly in electrochemical bioanalysis, as this approach has great potential for practical use in the future.

Discovery of Tamoxifen and N-Desmethyl Tamoxifen Protein Targets in MCF-7 Cells Using Large-Scale Protein Folding and Stability Measurements.

The proteins in an MCF-7 cell line were probed for tamoxifen (TAM) and n-desmethyl tamoxifen (NDT) induced stability changes using the Stability of Proteins from Rates of Oxidation (SPROX) technique in combination with two different quantitative proteomics strategies, including one based on SILAC and one based on isobaric mass tags. Over 1000 proteins were assayed for TAM- and NDT-induced protein stability changes, and a total of 163 and 200 protein hits were identified in the TAM and NDT studies, respectively. A subset of 27 high-confidence protein hits were reproducibly identified with both proteomics strategies and/or with multiple peptide probes. One-third of the high-confidence hits have previously established experimental links to the estrogen receptor, and nearly all of the high-confidence hits have established links to breast cancer. One high-confidence protein hit that has known estrogen receptor binding properties, Y-box binding protein 1 (YBX1), was further validated as a direct binding target of TAM using both the SPROX and pulse proteolysis techniques. Proteins with TAM- and/or NDT-induced expression level changes were also identified in the SILAC-SPROX experiments. These proteins with expression level changes included only a small fraction of those with TAM- and/or NDT-induced stability changes.

Thrombin-activatable fluorescent peptide incorporated gold nanoparticles for dual optical/computed tomography thrombus imaging

Thrombosis is an important pathophysiologic phenomenon in various cardiovascular diseases, which can lead to oxygen deprivation and infarction of tissues by generation of a thrombus. Thus, direct thrombus imaging can provide beneficial in diagnosis and therapy of thrombosis. Herein, we developed thrombin-activatable fluorescent peptide (TAP) incorporated silica-coated gold nanoparticles (TAP-SiO2@AuNPs) for direct imaging of thrombus by dual near-infrared fluorescence (NIRF) and micro-computed tomography (micro-CT) imaging, wherein TAP molecules were used as targeted thrombin-activatable peptide probes for thrombin-specific NIRF imaging. The freshly prepared TAP-SiO2@AuNPs had an average diameter of 39.8 ± 2.55 nm and they showed the quenched NIRF signal in aqueous condition, due to the excellent quenching effect of TAP molecules on the silica-gold nanoparticle surface. However, 30.31-fold higher NIRF intensity was rapidly recovered in the presence of thrombin in vitro, due to the thrombin-specific cleavage of quenched TAP molecules on the gold particle surface. Furthermore, TAP-SiO2@AuNPs were successfully accumulated in thrombus by their particle size-dependent capturing property, and they presented a potential X-ray absorption property in a dose-dependent manner. Finally, thrombotic lesion was clearly distinguished from peripheral tissues by dual NIRF/micro-CT imaging after intravenous injection of TAP-SiO2@AuNPs in the in situ thrombotic mouse model, simultaneously. This study showed that thrombin-activatable fluorescent peptide incorporated silica-coated gold nanoparticles can be potentially used as a dual imaging probe for direct thrombus imaging and therapy in clinical applications.

Design of Peptide-Based Probes for the Microscale Detection of Reactive Oxygen Species

Reactive oxygen species (ROS) can induce oxidative stress and are associated with cell death and chronic diseases in organisms. In the treatment of disease, drugs that induce ROS are associated with many side effects and unpleasant symptoms. Therefore, during the assessment of new drugs and candidate compounds, ROS generation is an issue of concern, because ROS can modify proteins, lipids, and nucleic acids within organisms and alter their biological functions. In this work, we designed a peptide-based probe for the rapid (<10 min) high-throughput survey of oxidative stress induced by clinical drugs at the microliter level. Using menadione and H2O2 as positive controls, just 100 μg/mL of the test compound and 100 μg/mL of the probe were sufficient to effectively monitor the generation of ROS, which is important as many active compounds are rare and difficult to isolate or purify. This in vitro evaluation could be used to effectively generate preliminary data before pharmacologically active candidate compounds are processed in cell-line or animal tests. Furthermore, we demonstrated that this peptide probe successfully detects ROS in biological samples.

Immediate hypersensitivity to penicillins. Identification of a new antigenic determinant

The study of adverse drug reactions (ADRs) constitutes a challenge in the area of Medicine. Drugs generate a large number of the total registered hypersensitivity reactions, where penicillins are responsible for more than half of them. In vitro tests in the market are not efficient enough since they lack in sensitivity and specificity. This is the reason why in vivo tests are carried out, with the subsequent danger to the patient’s life. It is essential to discover new β-lactam antigenic determinants to develop more effective detection systems and thus, obtain better explanations of the allergic mechanisms related to these drugs. We propose a strategy based on the use of “peptide probes”, small labeled and chemical active peptides which have been structurally modified for reacting with the β-lactam moiety at different conditions. The probes also contain a biotin group for application in an immunoassay format. Three different amoxicillin adducts have been obtained, purified and characterized by HPLC–MS and NMR techniques. These results have helped us to elucidate and propose a new antigenic determinant for β-lactams, named the “penamidyl” epitope. All the adducts have been validated and evaluated with sera from different penicillin allergic patients by means of a Magneto-ELISA, immunochemical technique that has allowed us to detect specific IgEs in a very high percentage of the serum samples. An immunoassay has been developed, validated and applied as a diagnostic tool for the detection of specific IgEs in the sera of penicillin allergic patients using a new antigenic determinant.

Peptide probes detect misfolded transthyretin oligomers in plasma of hereditary amyloidosis patients.

Increasing evidence supports the hypothesis that soluble misfolded protein assemblies contribute to the degeneration of postmitotic tissue in amyloid diseases. However, there is a dearth of reliable nonantibody-based probes for selectively detecting oligomeric aggregate structures circulating in plasma or deposited in tissues, making it difficult to scrutinize this hypothesis in patients. Hence, understanding the structure-proteotoxicity relationships driving amyloid diseases remains challenging, hampering the development of early diagnostic and novel treatment strategies. We report peptide-based probes that selectively label misfolded transthyretin (TTR) oligomers circulating in the plasma of TTR hereditary amyloidosis patients exhibiting a predominant neuropathic phenotype. These probes revealed that there are much fewer misfolded TTR oligomers in healthy controls, in asymptomatic carriers of mutations linked to amyloid polyneuropathy, and in patients with TTR-associated cardiomyopathies. The absence of misfolded TTR oligomers in the plasma of cardiomyopathy patients suggests that the tissue tropism observed in the TTR amyloidoses is structure-based. Misfolded oligomers decrease in TTR amyloid polyneuropathy patients treated with disease-modifying therapies (tafamidis or liver transplant-mediated gene therapy). In a subset of TTR amyloid polyneuropathy patients, the probes also detected a circulating TTR fragment that disappeared after tafamidis treatment. Proteomic analysis of the isolated TTR oligomers revealed a specific patient-associated signature composed of proteins that likely associate with the circulating TTR oligomers. Quantification of plasma oligomer concentrations using peptide probes could become an early diagnostic strategy, a response-to-therapy biomarker, and a useful tool for understanding structure-proteotoxicity relationships in the TTR amyloidoses.

Detection and Quantification of Biologically Active Botulinum Neurotoxin Serotypes A and B Using a Förster Resonance Energy Transfer-Based Quantum Dot Nanobiosensor.

Botulinum neurotoxin (BoNT) is the most potent toxin known. The ingestion of food contaminated with biologically active BoNT causes foodborne botulism, which can lead to respiratory paralysis, coma, and death after ingestion of as little as 70 μg for a 70 kg human. Because of its lethality and challenges associated with current detection methods, there is an urgent need for highly sensitive rapid screening techniques capable of detecting biologically active BoNT. Here, we describe a Förster resonance energy transfer-based nanobiosensor that uses quantum dots (QDs) and two specific quencher-labeled peptide probes to detect and differentiate two biologically active forms of BoNT, serotypes A and B, which were responsible for 80% of human foodborne botulism cases in the U.S. from 2012 to 2015. Each peptide probe contains an enzymatic cleavage site specific to only one serotype. QDs were selected based on the spectral overlap with the quenchers. In the presence of the target BoNT serotype, the peptide probe is cleaved and the quenching of QD photoluminescence (PL) is reduced, giving a signal that is easily detected by a PL spectrophotometer. This sensor performance was evaluated with light chains of BoNT/A and BoNT/B (LcA and LcB), catalytic domains of the respective serotypes. LcA and LcB were detected in 3 h with limits of detection of 0.2 and 2 ng/mL, respectively. The specificity of the sensor was evaluated, and no cross-reactivity from nontarget serotypes was observed with 2 h of incubation. Because each serotype-specific peptide is conjugated to a QD with a unique emission wavelength, multiple biologically active BoNT serotypes could be detected in one PL spectrum. The sensor was also shown to be responsive to BoNT/A and BoNT/B holotoxins. Good performance of this sensor implies its potential application as a rapid screening method for biologically active BoNT/A and BoNT/B in the laboratory and in the field.