PC12 Cell Adhesion Research Articles

The modification research of bionic silk fibroin nerve guidance conduits by silk sericin

Objective To explore the modification of bionic silk fibroin nerve conduits (SF-NCs) by silk sericin. Methods The innovative SS/SF blended-NCs was fabricated by a vertical sequential cooling thermal induced phase separation (TIPS) processing with SF solution added sericin in proportion, its morphology was observed by Scanning electron microscopy (SEM), X-ray diffraction (XRD) and infrared spectroscopy (FTIR) were used to detect its internal molecular structure. MTT assay was used to quantitatively analyzed the PC12 cells viability co-cultured with the innovative SS/SF-NCs, SEM was used to observe the adhesion and morphology of PC12 cells seeded into the innovative SS/SF, PC12 cells were used to assess the NGF bioactivity released from the SS/SF. Results The SEM results showed that the new fabricated SS/SF-NCs had linearly oriented lamellar-like multiple-channel which distributed evenly, got great changes on the channel microstructure and their mechanical properties had been greatly improved, compared to SF-NCs. The XRD and FTIR results showed that the SS/SF-NCs had the similar internal molecular structure with natural silk. The spaces between parallel lamellar-like channels, porosities and compressive strengths of the SS/SF-NCs decreased with decreasing Sequential freezing temperature. MTT assay results showed that the viability of PC12 cell was better than the control group (P < 0.05). The SEM observation indicated that PC12 cells showed good adhesion and differentiation with neuritis outgrowth during the period of co-culture with the SS/SF-NCs. NGF release from the innovative SS/SF-NCs was prolonged over 4 weeks, and remained bioactive. Conclusion The new fabricated SS/SF-NCs modified though silk sericin, which was highly bionic the structure of peripheral nerve fasciculus, had excellent mechanical properties and could be used as another alternative of artificial nerve conduits. Key words: Nerve guidance conduits (NCs); Silk sericin/silk fibroin (SS/SF) blended; Bionic; Modification; Peripheral nerve

Controlled neuronal cell patterning and guided neurite growth on micropatterned nanofiber platforms

Patterning neuronal cells and guiding neurite growth are important for applications such as prosthetics, cell based biosensors, and tissue engineering. In this paper, a microdevice is presented that provides neuronal cell patterning and guided neurite growth on a collagen coated gelatin/PCL nanofiber mat. The pattern consisted of a grid of polystyrene microwells/nodes to confine the cell bodies and orthogonal grooves to guide neurite growth from each node. Vacuum assisted cell seeding was used to localize cell bodies in the microwells and physically separate the cells during seeding. The electrospun nanofiber mats under the polystyrene microstructures were coated with collagen to enhance the cellular attachment and enhance differentiation. We evaluated the performance of our device using adhesion, viability, and differentiation assays of neuron-like PC12 cells compared to controls for vacuum seeding, spatial isolation and guidance, and collagen coating of the fibers. The device provided PC12 cell patterning with increased adhesion, differentiation, and guided neurite outgrowth compared to controls, demonstrating its potential for in vitro neuronal cell patterning studies.

Facile Synthesis of Conductive Polypyrrole Wrinkle Topographies on Polydimethylsiloxane via a Swelling-Deswelling Process and Their Potential Uses in Tissue Engineering.

Electrically conducting biomaterials have gained great attention in various biomedical studies especially to influence cell and tissue responses. In addition, wrinkling can present a unique topography that can modulate cell-material interactions. In this study, we developed a simple method to create wrinkle topographies of conductive polypyrrole (wPPy) on soft polydimethylsiloxane surfaces via a swelling-deswelling process during and after PPy polymerization and by varying the thickness of the PPy top layers. As a result, various features of wPPy in the range of the nano- and microscales were successfully obtained. In vitro cell culture studies with NIH 3T3 fibroblasts and PC12 neuronal cells indicated that the conductive wrinkle topographies promote cell adhesion and neurite outgrowth of PC12 cells. Our studies help to elucidate the design of the surface coating and patterning of conducting polymers, which will enable us to simultaneously provide topographical and electrical signals to improve cell-surface interactions for potential tissue-engineering applications.

In situ modification of cell-culture scaffolds by photocatalytic decomposition of organosilane monolayers

We demonstrate a novel application of TiO2 photocatalysis for modifying the cell affinity of a scaffold surface in a cell-culture environment. An as-deposited octadecyltrichlorosilane self-assembled monolayer (OTS SAM) on TiO2 was found to be hydrophobic and stably adsorbed serum albumins that blocked subsequent adsorption of other proteins and cells. Upon irradiation of ultraviolet (UV) light, OTS molecules were decomposed and became permissive to the adhesion of PC12 cells via adsorption of an extracellular matrix protein, collagen. Optimal UV dose was 200 J cm−2 for OTS SAM on TiO2. The amount of collagen adsorption decreased when excessive UV light was irradiated, most likely due to the surface being too hydrophilic to support its adsorption. This UV-induced modification required TiO2 to be present under the SAM and hence is a result of TiO2 photocatalysis. The UV irradiation for surface modification can be performed before cell plating or during cell culture. We also demonstrate that poly(ethylene glycol) SAM can also be patterned with this method, indicating that it is applicable to both hydrophobic and hydrophilic SAMs. This method provides a unique tool for fabricating cell microarrays and studying dynamical properties of living cells.

Three-layer microfibrous peripheral nerve guide conduit composed of elastin-laminin mimetic artificial protein and poly(L-lactic acid).

We developed a microfibrous poly(L-lactic acid) (PLLA) nerve conduit with a three-layered structure to simultaneously enhance nerve regeneration and prevent adhesion of surrounding tissue. The inner layer was composed of PLLA microfiber containing 25% elastin-laminin mimetic protein (AG73-(VPGIG)30) that promotes neurite outgrowth. The thickest middle layer was constructed of pure PLLA microfibers that impart the large mechanical strength to the conduit. A 10% poly(ethylene glycol) was added to the outer layer to prevent the adhesion with the surrounding tissue. The AG73-(VPGIG)30 compositing of an elastin-like repetitive sequence (VPGIG)30 and a laminin-derived sequence (RKRLQVQLSIRT: AG73) was biosynthesized using Escherichia coli. The PLLA microfibrous conduits were fabricated using an electrospinning procedure. AG73-(VPGIG)30 was successfully mixed in the PLLA microfibers, and the PLLA/AG73-(VPGIG)30 microfibers were stable under physiological conditions. The PLLA/AG73-(VPGIG)30 microfibers enhanced adhesion and neurite outgrowth of PC12 cells. The electrospun microfibrous conduit with a three-layered structure was implanted for bridging a 2.0-cm gap in the tibial nerve of a rabbit. Two months after implantation, no adhesion of surrounding tissue was observed, and the action potential was slightly improved in the nerve conduit with the PLLA/AG73-(VPGIG)30 inner layer.

In Situ Synthesis of Robust Conductive Cellulose/Polypyrrole Composite Aerogels and Their Potential Application in Nerve Regeneration

AbstractNanostructured conductive polymers can offer analogous environments for extracellular matrix and induce cellular responses by electric stimulation, however, such materials often lack mechanical strength and tend to collapse under small stresses. We prepared electrically conductive nanoporous materials by coating nanoporous cellulose gels (NCG) with polypyrrole (PPy) nanoparticles, which were synthesized in situ from pyrrole monomers supplied as vapor. The resulting NCG/PPy composite hydrogels were converted to aerogels by drying with supercritical CO2, giving a density of 0.41–0.53 g cm−3, nitrogen adsorption surface areas of 264–303 m2 g−1, and high mechanical strength. The NCG/PPy composite hydrogels exhibited an electrical conductivity of up to 0.08 S cm−1. In vitro studies showed that the incorporation of PPy into an NCG enhances the adhesion and proliferation of PC12 cells. Electrical stimulation demonstrated that PC12 cells attached and extended longer neurites when cultured on NCG/PPy composite gels with DBSA dopant. These materials are promising candidates for applications in nerve regeneration, carbon capture, catalyst supports, and many others.

In Situ Synthesis of Robust Conductive Cellulose/Polypyrrole Composite Aerogels and Their Potential Application in Nerve Regeneration

Nanostructured conductive polymers can offer analogous environments for extracellular matrix and induce cellular responses by electric stimulation, however, such materials often lack mechanical strength and tend to collapse under small stresses. We prepared electrically conductive nanoporous materials by coating nanoporous cellulose gels (NCG) with polypyrrole (PPy) nanoparticles, which were synthesized in situ from pyrrole monomers supplied as vapor. The resulting NCG/PPy composite hydrogels were converted to aerogels by drying with supercritical CO2, giving a density of 0.41-0.53 g cm(-3), nitrogen adsorption surface areas of 264-303 m(2) g(-1), and high mechanical strength. The NCG/PPy composite hydrogels exhibited an electrical conductivity of up to 0.08 S cm(-1). In vitro studies showed that the incorporation of PPy into an NCG enhances the adhesion and proliferation of PC12 cells. Electrical stimulation demonstrated that PC12 cells attached and extended longer neurites when cultured on NCG/PPy composite gels with DBSA dopant. These materials are promising candidates for applications in nerve regeneration, carbon capture, catalyst supports, and many others.

Assessing cellular response to functionalized α-helical peptide hydrogels.

α-Helical peptide hydrogels are decorated with a cell-binding peptide motif (RGDS), which is shown to promote adhesion, proliferation, and differentiation of PC12 cells. Gel structure and integrity are maintained after functionalization. This opens possibilities for the bottom-up design and engineering of complex functional scaffolds for 2D and 3D cell cultures.

Arrayed rGOSH/PMASH Microcapsule Platform Integrating Surface Topography, Chemical Cues, and Electrical Stimulation for Three‐Dimensional Neuron‐Like Cell Growth and Neurite Sprouting

The biocompatible thiol‐functionalized rGOSH/PMASH microcapsules encapsulating nerve growth factor (NGF) are arrayed onto a transparent and conductive substrate, i.e., indium tin oxide (ITO), to integrate electrically stimulated cellular differentiation, electrically controlled NGF release, and topographically rough nano‐surfaces into a 3‐D platform for nerve regeneration. The rGOSH/PMASH microcapsules with microscale topography function not only as an adhesive coating to promote the adhesion of PC12 cells but also as electroactive NGF‐releasing electrodes that stimulate NGF release and accelerate the differentiation of PC12 cells during electrical stimulation. Once electrical treatment is applied, NGF release and electrically enhanced cellular differentiation lead to an obvious increase both in the percentage of cells with neurites and in the neurite length. This length can reach nearly 90 μm within 2 days of cell culture. The average neurite length is significantly increased (four‐fold) after culture on the rGOSH/PMASH microcapsule substrate for 2 days compared with culture on a substrate without an rGOSH/PMASH coating. These multifunctional rGOSH/PMASH microcapsules may be used as potential 3‐D patterned substrates for neural regeneration and neural prosthetics in tissue engineering applications.

Enhanced neural cell adhesion and neurite outgrowth on graphene-based biomimetic substrates.

Neural cell adhesion and neurite outgrowth were examined on graphene-based biomimetic substrates. The biocompatibility of carbon nanomaterials such as graphene and carbon nanotubes (CNTs), that is, single-walled and multiwalled CNTs, against pheochromocytoma-derived PC-12 neural cells was also evaluated by quantifying metabolic activity (with WST-8 assay), intracellular oxidative stress (with ROS assay), and membrane integrity (with LDH assay). Graphene films were grown by using chemical vapor deposition and were then coated onto glass coverslips by using the scooping method. Graphene sheets were patterned on SiO2/Si substrates by using photolithography and were then covered with serum for a neural cell culture. Both types of CNTs induced significant dose-dependent decreases in the viability of PC-12 cells, whereas graphene exerted adverse effects on the neural cells just at over 62.5 ppm. This result implies that graphene and CNTs, even though they were the same carbon-based nanomaterials, show differential influences on neural cells. Furthermore, graphene-coated or graphene-patterned substrates were shown to substantially enhance the adhesion and neurite outgrowth of PC-12 cells. These results suggest that graphene-based substrates as biomimetic cues have good biocompatibility as well as a unique surface property that can enhance the neural cells, which would open up enormous opportunities in neural regeneration and nanomedicine.

Cell Behavior on Gallium Nitride Surfaces: Peptide Affinity Attachment versus Covalent Functionalization

Gallium nitride is a wide band gap semiconductor that demonstrates a unique set of optical and electrical properties as well as aqueous stability and biocompatibility. This combination of properties makes gallium nitride a strong candidate for use in chemical and biological applications such as sensors and neural interfaces. Molecular modification can be used to enhance the functionality and properties of the gallium nitride surface. Here, gallium nitride surfaces were functionalized with a PC12 cell adhesion promoting peptide using covalent and affinity driven attachment methods. The covalent scheme proceeded by Grignard reaction and olefin metathesis while the affinity driven scheme utilized the recognition peptide isolated through phage display. This study shows that the method of attaching the adhesion peptide influences PC12 cell adhesion and differentiation as measured by cell density and morphological analysis. Covalent attachment promoted monolayer and dispersed cell adhesion while affinity driven attachment promoted multilayer cell agglomeration. Higher cell density was observed on surfaces modified using the recognition peptide. The results suggest that the covalent and affinity driven attachment methods are both suitable for promoting PC12 cell adhesion to the gallium nitride surface, though each method may be preferentially suited for distinct applications.

Protein kinase Cα/β inhibitor Gö6976 promotes PC12 cell adhesion and spreading through membrane recruitment and activation of protein kinase Cδ

Gö6976 is a nonglycosidic indolocarbazole compound widely used as a specific inhibitor of PKCα/β. In experiments probing for a role of PKCα in human laminin-2-integrin-mediated cell adhesion and spreading of PC12 cells, we observed unexpected enhancements of adhesion, spreading and stress fiber formation to 1μM Gö6976 with concomitant increase in membrane translocation of PKCδ and autophosphorylation of focal adhesion kinase (FAK). Importantly, enhanced cellular behavior and membrane translocation of PKCδ induced by Gö6976 was retained in siRNA-transfected PC12 cells to knockdown PKCα expression. Gö6976 also induced laminin-dependent cell adhesion in NIH/3T3 and CV-1 fibroblasts, suggesting of a mechanism that may be common to multiple cell-types. A specific inhibitor of PKCδ, rottlerin, completely abrogated Gö6976-dependent increase in PC12 cell adhesion to laminin as well as the activation of small GTPases, Rac1 and Cdc42, that are downstream of PKCδ in adhesion receptor signaling. siRNA knockdown of Rac1 and Cdc42 expression inhibited cell spreading and lamellipodia formation in PC12 cells. Overall, these results suggest that Gö6976 may stimulate membrane recruitment of PKCδ through a mechanism that is independent of PKCα/β signaling. In addition, the activation of Rac1 and Cdc42 by human laminin-2-integrin-dependent activation of PKCδ/FAK signaling mediates cell spreading and lamellipodia formation in PC12 cells.

Identification of Active Sequences in the L4a Domain of Laminin α5 Promoting Neurite Elongation

Laminin α5 is an extracellular matrix protein containing multiple domains implicated in various biological processes, such as embryogenesis and renal function. In this study, we used recombinant proteins and synthetic peptides to identify amino acid residues within the short arm region of α5 that were critical for neurite outgrowth activity. The short arm of α5 contains three globular domains (LN, L4a, and L4b) and three rodlike elements (LEa, LEb, and LEc). Recombinant proteins comprised of the α5 short arm fused with a Fc tag produced in 293 cells were assayed for PC12 (pheochromocytoma) cell adhesion and neurite outgrowth activities. Although it did not have cell attachment activity, neurite outgrowth was promoted by the recombinant protein. To narrow the region involved in neurite outgrowth activity, two truncated recombinant proteins were produced in 293 cells. A recombinant protein lacking L4a and LEb lost activity. Furthermore, we synthesized 78 partially overlapping peptides representing most of the amino acid sequences of L4a and LEb. Of the peptides, A5-76 [mouse laminin α5 928-939 (TSPDLFRLVFRY) in L4a] exhibited neurite outgrowth activity. Mutagenesis studies showed that Phe(933) and Arg(934) were involved in neurite outgrowth activity. Moreover, inhibition assays using anti-integrin monoclonal antibodies showed that neurite outgrowth on the α5 short arm was partially mediated by integrin α1β1. However, the antibodies to integrin α1 and β1 did not inhibit neurite elongation on the A5-76 peptide. These results suggest that in addition to cellular interactions with the active site in the L4a domain, the binding of integrin α1β1 seems to modulate neurite elongation on the short arm of α5.

Elastic chitosan conduits with multiple channels and well defined microstructure

Four kinds of chitosan conduits with longitudinal multi-channels and controlled internal microstructures were prepared using a special mold and a freeze-drying method. One of the conduits was fabricated from a chitosan solution (ab NC), while the other three groups were made from a pre-gelled chitosan solution using genipin as a chemical cross-linker (ab gNC), dibasic sodium phosphate as a physical cross-linker (ab pNC) or a combined ionic and covalent co-cross-linker (ab gpNC), respectively. The porosity of the chitosan conduits ranged from 88 to 90%. The gpNC showed highly interconnected and uniformly distributed pores compared to NC, the gNC and pNC. In contrast, the gNC and gpNC showed about 10% of the volume swelling ratio in 37°C PBS solution, although the gpNC scaffold's water uptake was the highest, at more than 17 times its original mass. Compressive tests showed that gpNC had significant elasticity and maintained its physical integrity even after compressing them down to 20% of their original height. The elastic modulus of gpNC reached 80kPa, which was more than twice that of the other groups. Adhesion and proliferation of PC12 cells on chitosan gpNC scaffolds showed excellent properties by MTT and SEM observation, which indicated the potential of gpNC scaffolds for nerve tissue engineering applications.

Gallium nitride is biocompatible and non-toxic before and after functionalization with peptides

The toxicity of semiconductor materials can significantly hinder their use for in vitro and in vivo applications. Gallium nitride (GaN) is a material with remarkable properties, including excellent chemical stability. This work demonstrated that functionalized and etched GaN surfaces were stable in aqueous environments and leached a negligible amount of Ga in solution even in the presence of hydrogen peroxide. Also, GaN surfaces in cell culture did not interfere with nearby cell growth, and etched GaN promoted the adhesion of cells compared to etched silicon surfaces. A model peptide, “IKVAV”, covalently attached to GaN and silicon surfaces increased the adhesion of PC12 cells. Peptide terminated GaN promoted greater cell spreading and extension of neurites. The results suggest that peptide modified GaN is a biocompatible and non-toxic material that can be used to probe chemical and electrical stimuli associated with neural interfaces.

THE FABRICATION AND CHARACTERIZATION OF LINEARLY ORIENTED LAMELLAR-LIKE MULTIPLE-CHANNEL SILK FIBROIN NERVE CONDUITS

Objective To explore how to fabricate a innovative silk fibroin nerve conduits (SF-NCs) with linearly oriented multiple-channel structure. Methods The innovative SF-NCs was fabricated by a vertical sequential cooling-thermal induced phase separation (TIPS) processing, its morphology was observed by Scanning electron microscopy (SEM), MTT assay was used to quantitatively analyzed the PC12 cells viability co-cultured with the innovative SF-NCs, SEM was used to observe the adhesion and morphology of PC12 cells seeded into the innovative SF-NCs, PC12 cells were used to assess the NGF bioactivity released from the SF-NCs. Results The SEM results showed that the new fabricated SF-NCs had linearly oriented lamellar-like multiple-channel, which distributed evenly. The spaces between parallel lamellar-like channels (ds), porosities and compressive strengths (σc, Ec) of the SF-NCs decreased with decreasing T ft . MTT assay results showed that the viability of PC12 cell was better than the control group (P &lt; 0.05). The SEM observation indicated that PC12 cells showed good adhesion and differentiation with neuritis outgrowth during the period of co-culture with the SF-NCs. NGF release from the innovative SF-NCs was prolonged over 4 weeks, and remained bioactive. Conclusion The new fabricated SF-NCs with special topography structure, excellent mechanical properties and good biocompatibility. Importantly, the SF-NCs are also biomimicking the anatomy structure of peripheral nerve fasciculus and could be used as another alternative of artificial nerve conduits.

Effect of carbon nanotube coating of aligned nanofibrous polymer scaffolds on the neurite outgrowth of PC‐12 cells

Neurite outgrowth from endogenous or transplanted cells is important for neural regeneration following nerve tissue injury. Modified substrates often provide better environments for cell adhesion and neurite outgrowth. This study was conducted to determine if MWCNT (multiwalled carbon nanotube)-coated electrospun PLCL [poly (l-lactic acid-co-3-caprolactone)] nanofibres improved the neurite outgrowth of PC-12 cells. To accomplish this, two groups, PC-12 cells in either uncoated PLCL scaffolds or MWCNT-coated PLCL scaffolds were cultured for 9 days. MWCNT-coated PLCL scaffolds showed improved adhesion, proliferation and neurite outgrowth of PC-12 cells. These findings suggest that MWCNT-coated nanofibrous scaffolds may be an attractive platform for cell transplantation application in neural tissue engineering.

Fabrication and cellular compatibility of aligned chitosan–PCL fibers for nerve tissue regeneration

The ability to produce aligned sub-micron fibers may open new avenues for the development of scaffolds for application in tissue engineering and regenerative medicine. An area of particular interest is functional restoration of damaged or diseased nerves where the aligned fibers serve to support cell adhesion and proliferation, and guide neurite outgrowth in the direction of fiber orientation. In this study, we developed an aligned chitosan–polycaprolactone (chitosan–PCL) fibrous scaffold and investigated how the fiber alignment influenced nerve cell organization and function in comparison with randomly oriented fibrous scaffolds and cast films of the same material. Schwann cells (SCs) were shown to attach and proliferate on all the substrates regardless of their topography, demonstrating the cellular compatibility of the chitosan–PCL material. SCs grown on the aligned chitosan–PCL fibers exhibited a bipolar morphology that oriented along the fiber alignment direction, while those on the films and randomly oriented fibers had a multipolar morphology. Similarly, the chitosan–PCL material supported neuron-like PC-12 cell adhesion, and the aligned fibers regulated the growth of PC-12 cells along the fiber orientation. Additionally, PC-12 cells cultured on the aligned fibers exhibited enhanced unidirectional neurite extension along fiber orientation and significantly higher β-tubulin gene expression than those grown on chitosan–PCL films and randomly oriented fibers. Our investigation suggested that the aligned chitosan–PCL fibers can serve as a suitable scaffold for improved nerve tissue reconstruction.

Neuronal adhesion and differentiation driven by nanoscale surface free-energy gradients

Recent results indicate that, in addition to chemical, spatial and mechanical cues, substrate physical cues such as gradients in surface energy may also impact cell functions, such as neuronal differentiation of PC12 cells. However, it remains to be determined what surface effect is the most critical in triggering PC12 cell differentiation. Here we show that, beyond continuously probing the surface energy landscape of their environment, PC12 cells are highly sensitive to nanoscale chemical heterogeneities. Self-assembled monolayers of alkylsiloxanes on glass were used as a culture substrate. By changing the structure, ordering and chemical nature of the monolayer, the surface energy distribution is altered. While both well-ordered CH 3 terminated substrates and bare glass (OH terminated) substrates did not favor PC12 cell adhesion, PC12 cells seeded on highly disordered CH 3/OH substrates underwent enhanced adhesion and prompt neuritogenesis by 48 h of culture, without nerve growth factor treatment. These data illustrate that surface free-energy gradients, generated by nanoscale chemical heterogeneities, are critical to biological processes such as nerve regeneration on biomaterials.

The effect of alternative neuronal differentiation pathways on PC12 cell adhesion and neurite alignment to nanogratings

During development and regeneration of the mammalian nervous system, directional signals guide differentiating neurons toward their targets. Soluble neurotrophic molecules encode for preferential direction over long distances while the local topography is read by cells in a process requiring the establishment of focal adhesions. The mutual interaction between overlapping molecular and topographical signals introduces an additional level of control to this picture. The role of the substrate topography was demonstrated exploiting nanotechnologies to generate biomimetic scaffolds that control both the polarity of differentiating neurons and the alignment of their neurites. Here PC12 cells contacting nanogratings made of copolymer 2-norbornene ethylene (COC), were alternatively stimulated with Nerve Growth Factor, Forskolin, and 8-(4-chloro-phenylthio)-2′-O-methyladenosine-3′,5′-cyclic (8CPT-2Me-cAMP) or with a combination of them. Topographical guidance was differently modulated by the alternative stimulation protocols tested. Forskolin stimulation reduced the efficiency of neurite alignment to the nanogratings. This effect was linked to the inhibition of focal adhesion maturation. Modulation of neurite alignment and focal adhesion maturation upon Forskolin stimulation depended on the activation of the MEK/ERK signaling but were PkA independent. Altogether, our results demonstrate that topographical guidance in PC12 cells is modulated by the activation of alternative neuronal differentiation pathways.