Formation Pathways Research Articles

Numerical study on the effect of injection strategy on combustion and NO emission from different sources in a diesel/ammonia RCCI engine

Diesel/ammonia operation is one of the ways to efficiently utilize ammonia and reduce carbon emissions, however, the increase in fuel NO introduces serious emission problems. To explore the generation mechanisms of fuel NO and oxidant source NO, a multi-component diesel/ammonia chemical reaction mechanism was constructed in this study, and based on 3D CFD simulation and N-element tracking method, the combustion and different source NO emission characteristics of diesel/ammonia reactivity controlled compression ignition (RCCI) engine at low loads were investigated by pilot injection timing (SOI1) and pilot injection ratio (PIR). In addition, the effect of different first injection spray angle (SA1) and double injection spray angle (SAtotal) on the engine operation was investigated. The results showed that high PIR and delayed SOI1 enhanced the engine IMEP but led to high PRRmax. At a PIR of 15 %, total NO emissions increased as SOI1 advanced, and the trend was reversed when the PIR was higher than 15 %. Fuel NO was produced earlier than the oxidant source N∗O. In terms of 1 spatial distribution, high concentrations of both NO and N∗O were distributed in and around the secondary diesel fuel ignition location, and fuel NO began to be reduced where the oxidant source N∗O was rapidly formed. The reduction mechanism of NO in the cylinder was a multi-path reduction mechanism incorporating Thermal DeNOx, NO Reburning, and inverse reaction pathways for NO formation from the oxidant source. Appropriate reduction of the SAtotal can significantly reduce the total NO emission while maintaining no significant reduction in IMEP. When SAtotal was 82°, the total NO emission was only 16.3 % of the original spray angle and PRRmax was further reduced. After optimization, when a narrow SAtotal of 82°, SOI1 of −15° CA, and PIR of 35 % were used, the IMEP of the engine increased by 5.9 %, and the total NO emission was reduced by 86 %, while PRRmax did not exceed the PRR upper limit.

Configuration Interaction in Frontier Molecular Orbital Basis for Screening the Spin-Correlated, Spatially Separated Triplet Pair State 1(T···T) Formation.

In the theoretical screening of Singlet Fission rates in molecular aggregates, often the frontier molecular orbital model for dimers is employed. However, the dimer approach fails to account for recent experimental findings that suggest singlet fission progresses through a further intermediate state featuring two spatially separated, spin-correlated triplets, specifically a 1(T···T) state. We address this limitation by generalizing the often used frontier molecular orbital model for singlet fission by incorporation of both separated Charge Transfer (C···T) and 1(T···T) states as well as mixed triplet-charge transfer states, delivering analytic expressions for the diabatic matrix elements. Applying the methodology to the perylene diimide trimer, we examine the packing dependence of competing formation pathways of the 1(T···T) state by evaluation of diabatic matrix elements.

Uncovering the Pathway of Serine Octamer Magic Number Cluster Formation during Electrospray Ionization: Experiments and Simulations.

Electrospray ionization (ESI) of serine (Ser) solution generates Ser8H+ as an abundant magic number cluster. ESI clustering of most other solutes yields nonspecific stoichiometries. It is unclear why Ser8H+ dominates in the case of Ser, and how Ser8H+ forms during ESI. Even the location of Ser8H+ formation is contentious (in solution, in ESI droplets, or elsewhere). Here we unravel key aspects of the l-Ser8H+ formation pathway. Harsh ion sampling conditions promote the collision-induced dissociation (CID) of regular ESI analytes. Unexpectedly, Ser8H+ was seemingly resistant against CID during ion sampling, despite its extremely low tandem mass spectrometry (MS/MS) stability. This unusual behavior reveals that Ser8H+ forms during ion sampling. We propose the following pathway: (1) Nonspecific Ser clusters are released when ESI droplets evaporate to dryness. These initial clusters cover a wide size range, from a few Ser to hundreds or thousands of monomers. (2) The clusters undergo dissociation during ion sampling, mostly via successive loss of neutral monomers. For any source activation voltage, there is a subpopulation of clusters for which this CID cascade tends to terminate at the octamer level, culminating in Ser8H+-dominated product distributions. Mobile proton molecular dynamics simulations were used to model the entire pathway. Ser8H+ structures formed in these simulations were consistent with ion mobility experiments. The most compact structures resembled the model of [Scutelnic, V. J. Am. Chem. Soc. 2018, 140, 7554-7560], with numerous intermolecular salt bridges and H-bonds. Our findings illustrate how the interplay of association and dissociation reactions across phase boundaries can culminate in magic number clusters.

The role of pyroptosis in the occurrence and development of pregnancy-related diseases.

Pyroptosis is a form of programmed cell death that is crucial in the development of various diseases, including autoimmune diseases, atherosclerotic diseases, cancer, and pregnancy complications. In recent years, it has gained significant attention in national and international research due to its association with inflammatory immune overactivation and its involvement in pregnancy complications such as miscarriage and preeclampsia (PE). The mechanisms discussed include the canonical pyroptosis pathway of gasdermin activation and pore formation (caspase-1-dependent pyroptosis) and the non-canonical pyroptosis pathway (cysteoaspartic enzymes other than caspase-1). These pathways work on various cellular and factorial levels to influence normal pregnancy. This review aims to summarize and analyze the pyroptosis pathways associated with abnormal pregnancies and pregnancy complications. The objective is to enhance pregnancy outcomes by identifying various targets to prevent the onset of pyroptosis.

Plasma-catalytic dry reforming of CH4: Effects of plasma-generated species on the surface chemistry

By means of steady-state experiments and a global model, we studied the effects of plasma-generated reactive species on the surface chemistry and coking in plasma-catalytic CH4/CO2 reforming at reduced pressure (8–40 kPa). We used a hybrid ZDPlasKin-CHEMKIN model to predict the species densities over time. The detailed plasma-catalytic mechanism consists of the plasma discharge scheme, a gas-phase chemistry set and a surface mechanism. Our experimental results show that the coupling of Ni/SiO2 catalyst with plasma is more effective in CH4/CO2 activation and conversion than unpacked DBD plasma, with syngas being the main products. The highest total conversion of 16 % was achieved at 8000 V and 473 K, with corresponding CO and H2 yields of 15 % and 12 %, respectively. The reactants conversion and product selectivity are well captured by the kinetic model. Our simulation results suggest that vibrational species and radicals can accelerate the dissociative adsorption and Eley-Rideal (E-R) reactions. Path flux analysis shows that E-R reactions dominate the surface reaction pathways, which differs from thermal catalysis, indicating that the coupling of non-equilibrium plasma and catalysis can effectively shift the formation and consumption pathways of important adsorbates. For instance, our model suggests that HCOO(s) is primarily generated through the E-R reaction CO2(v) + H(s) → HCOO(s), while the hydrogenation reaction HCOO(s) + H → HCOOH(s) is the main source of HCOOH(s). Carbon deposition on the catalyst surface is primarily formed through the stepwise dehydrogenation of CH4, while the E-R reactions enhanced by plasma-generated H and O atoms dominate the consumption of carbon deposition. This work provides new insights into the effects of reactive species on the surface chemistry in plasma-catalytic CH4/CO2 reforming.

Oxygen Functionalization of Carbon Nanotubes Shifted the Formation Pathway of Hydroxyl Radicals in Catalytic Ozonation: The Overlooked Role of Hydrogen Peroxide

Oxygen Functionalization of Carbon Nanotubes Shifted the Formation Pathway of Hydroxyl Radicals in Catalytic Ozonation: The Overlooked Role of Hydrogen Peroxide

Biogas slurry: A potential substance that synergistically enhances rapeseed yield and lodging resistance

Biogas slurry (BS) plays a vital role in improving the efficiency of crop production. On the flip side, the impact of BS on plant lodging factors and yield related traits is still obscure. Hence, we aimed to study the effects of pig and cow BS applications on yield formation, morpho-anatomical, mechanical, physiological properties and transcript expression patterns. The results showed that the yield and lodging resistance of rapeseed were synergistically improved via applying full BS dosage versus nitrogen fertilizer (CK). In addition, the seed yield was significantly increased by 23.9 % by promoting the dry matter accumulation and transport-ability, increasing number of pods by 8.4 % and 1000-seed weight by 5.1 %, respectively. Moreover, BS developed the stem mechanical strength by decreasing lodging index by 34.2 %, which was manifested by an increase in stem thickness and stiffness and a reduction in plant height. Besides, it enhanced the photosynthesis through promoting chlorophyll synthesis, delaying plant senescence, and accumulating N and K concentration. Anatomical observations revealed that BS increased greater number and area of stem vascular bundles, vessels, and maintained a dense microstructure than CK. Also, it boosted pectin, Ca2+ and K+ contents, which were significantly positively correlated with stem mechanical strength and reduced cellulose, lignin and hemicellulose contents. Meanwhile, correlation and structural equation modeling analysis validated the above results. Additionally, the differentially expressed genes were enriched in cell wall formation pathway, especially about the biosynthesis of pectin (PME, PG and PL), cellulose (CesA and CSL), lignin (PAL, POD, CCR, LAC and COMT) and hemicellulose (XTH and Xyl) were identified under BS. The above-mentioned results indicated that BS simultaneously affected lodging behavior by altering structural carbohydrates and modified yield composition by regulating dry-matter accumulation and allocation. This is the first comprehensive strategy on synchronizing rapeseed yield increase and lodging resistance under optimized BS management.

Comparison of the Efficiency of B-O and B-C Bond Formation Pathways in Borane-Catalyzed Carbene Transfer Reactions Using α-Diazocarbonyl Precursors: A Combined Density Functional Theory and Machine Learning Study.

Lewis acidic boranes, especially tris(pentafluorophenyl)borane [B(C6F5)3], have emerged as metal-free catalysts for carbene transfer reactions of α-diazocarbonyl compounds in a variety of functionalization reactions. The established mechanism for how borane facilitates carbene generation for these compounds in the scientific community is based on the formation of a B-O (C=O) intermediate (path O). Herein, we report an extensive DFT study that challenges the notion of a ubiquitous path O, revealing that B-C(=N=N) bond formation (path C) for certain diazocarbonyl substrates proves to be the preferred pathway. This study elucidates, through the introduction of 22 various substituents on each side of the α-diazocarbonyl backbone, how the electron-donating and -withdrawing properties of substituents influence the competition between these B-O and B-C pathways. To elucidate the impact of the electronic features of diazo substrates on the competition between the O and C pathways in the studied dataset, we employed a machine learning approach based on the Random Forest model. This analysis revealed that substrates with higher electron density on the diazo-attached carbon, lower electron density on the carbonyl carbon, and more stable HOMO orbitals tend to proceed via path C. Furthermore, this study not only demonstrates that borane efficiency in facilitating N2 release is greatly affected by the nature of substituents on both sides of the α-diazocarbonyl functionality but also shows that for some substrates, borane is incapable of catalyzing the release of molecular nitrogen.

Brown Carbon Emissions from Biomass Burning under Simulated Wildfire and Prescribed-Fire Conditions.

We investigated the light-absorption properties of brown carbon (BrC) as part of the Georgia Wildland-Fire Simulation Experiment. We constructed fuel beds representative of three ecoregions in the Southeastern U.S. and varied the fuel-bed moisture content to simulate either prescribed fires or drought-induced wildfires. Based on decreasing fire radiative energy normalized by fuel-bed mass loading (FREnorm), the combustion conditions were grouped into wildfire (Wild), prescribed fire (Rx), and wildfire involving duff ignition (WildDuff). The emitted BrC ranged from weakly absorbing (WildDuff) to moderately absorbing (Rx and Wild) with the imaginary part of the refractive index (k) values that were well-correlated with FREnorm. We apportioned the BrC into water-soluble (WSBrC) and water-insoluble (WIBrC). Approximately half of the WSBrC molecules detected using electrospray-ionization mass spectrometry were potential chromophores. Nevertheless, k of WSBrC was an order of magnitude smaller than k of WIBrC. Furthermore, k of WIBrC was well-correlated with FREnorm while k of WSBrC was not, suggesting different formation pathways between WIBrC and WSBrC. Overall, the results signify the importance of combustion conditions in determining BrC light-absorption properties and indicate that variables in wildland fires, such as moisture content and fuel-bed composition, impact BrC light-absorption properties to the extent that they influence combustion conditions.

The Star–Planet Composition Connection

The mantra “know thy star, know thy planet” has proven to be very important for many aspects of exoplanet science. Here I review how stellar abundances inform our understanding of planet composition and, thus, formation and evolution. In particular, I discuss how: ▪The strongest star–planet connection is still the giant planet–metallicity correlation, the strength of which may indicate a break point between the formation of planets versus brown dwarfs.▪We do not have very good constraints on the lower metallicity limit for planet formation, although new statistics from TESS are helping, and it appears that, at low [Fe/H], α elements can substitute for iron as seeds for planet formation.▪The depletion of refractory versus volatile elements in stellar photospheres (particularly the Sun) was initially suggested as a sign of small planet formation but is challenging to interpret, and small differences in binary star compositions can be attributed mostly to processes other than planet formation.▪We can and should go beyond comparisons of the carbon-to-oxygen ratio in giant planets and their host stars, incorporating other volatile and refractory species to better constrain planet formation pathways.▪There appears to be a positive correlation between small planet bulk density and host star metallicity, but exactly how closely small planet refractory compositions match those of their host stars—and their true diversity—is still uncertain.

NDSRIs Crisis in Pharmaceuticals; Insights on Formation Pathways, Root Causes, Risk Management, and Novel Analytical Techniques.

The discovery of a new class of nitrosamine impurities called N-nitroso drug substance related impurities (NDSRIs) in pharmaceuticals has emerged as a significant challenge for the pharmaceutical sector due to their significant genotoxic and mutagenic effects. Regulatory bodies globally in active collaboration with all the concerned stake holders, are taking effective measures to prevent and control NDSRIs. This comprehensive review on NDSRIs discusses formation pathways, root cause analysis, acceptable intake limits, case studies, control strategies and regulatory responses pertaining to recent NDSRI incidents. This review discusses the novel liquid chromatographic techniques (LC- MS/MS, GC-MS/MS) used to identify and quantify of NDSRIs. This review would aid pharmaceutical professionals, R&D analytical and formulation scientists, and regulatory bodies in gaining deeper insights into the NDSRIs crisis, facilitating formulation of NDSRI-free drug products, and ensuring their sensitive detection with accurate risk evaluation.

Doping SrSnO3 perovskite with transition metals: Synthesis of double hydroxides, thermal decomposition, and pigment potential

The primary objective of this research is to explore the feasibility of synthesizing phase-pure perovskite SrSnO3 doped with transition metals and to evaluate the potential of these products as high-temperature inorganic pigments. The initial step in preparing perovskite powders with the general formula SrSn0.95M0.05O3-δ (M = Mn, Fe, Co, Ni) involved synthesizing SrSn0.95M0.05(OH)6 followed by its thermal decomposition. The thermal decomposition processes and the reaction pathway for perovskite formation were analyzed using thermal analysis and X-ray diffraction analysis. Single-phase products of beige SrSn0.95Fe0.05O3-δ and brown SrSn0.95Co0.05O3-δ were successfully obtained by calcining the precursors at 1,100 °C. In contrast, brown SrSn0.95Mn0.05O3-δ contained a phase impurity of SnO2 and doping with Ni ions resulted in a phase mixture of SrSnO3 and NiO. The pigment quality of the powders was assessed based on their color parameters, described using the CIE Lab system.

Identification, Synthesis, and Characterization of Process Related Impurities in the Synthesis of Boc‐L‐Lys(Boc)‐OSu

ABSTRACTProtected lysine esters (Boc‐L‐Lys(Boc)‐OSu) an intermediate of high repute in the peptide synthesis and diverse chemical synthetic applications, was the subject of synthetic process development studies, unveiling process‐related impurities. These impurities were synthesized, characterized, and identified by different analytical tools, with their retention times verified by HPLC co‐injection with commercial products. Detailed discussions ensued on the potential formation pathways and synthetic strategies of these process‐related impurities.

Hollow ion atomic structure and X-ray emission in dense hot plasmas

Hollow ion X-ray emission is of great interest in high-energy-density research, since negligible opacity allows studies from the interior of very dense objects. In this paper, ionization potential depressions of the isoelectronic sequences for single and double K-shell vacancies are obtained from a pure ab initio multiconfiguration Hartree–Fock simulation including exact exchange terms and finite temperature dense plasma effects. It is demonstrated that the simultaneous representation of these ab initio data in the form of a map of hollow ion X-ray transition energies enables identification of important steps in the matter evolution and ionization dynamics. Mapping along the isoelectronic sequence as a function of the pumping energy of a X-ray free electron laser also enables visualization of the impact of ionization potential depression on the pathways of hollow ion formation.

New insights into the singlet oxygen-independent formation of TEMPO signals in electron paramagnetic resonance analysis

Electron paramagnetic resonance (EPR) is currently the most commonly used technique for measurement of singlet oxygen (1O2) in advanced oxidation processes. However, the characteristic EPR signal associated with 1O2 (2,2,6,6-tetramethylpiperidine-N-oxide radical, TEMPO) can be generated via alternative pathways not involving 1O2, leading to misinterpreted results. In this study, in-situ EPR analysis was used to re-examine the interaction between peroxymonosulfate (PMS), a common oxidant, and 2,2,6,6-tetramethyl-4-piperidinol (TEMP), the spin-trapping agent of 1O2. It was found that TEMPO could be generated in TEMP/PMS system over a broad pH range (3.0–11.0). The pathway for TEMPO formation was the direct oxidation of TEMP by PMS, and 1O2 was not involved. Furthermore, the intensity of TEMPO (ITEMPO) followed a reverse parabolic pattern as the [TEMP]/[PMS] ratios changed across all pH values. Kinetic analysis unveiled three distinct patterns (continuous linear increase; linear increase followed by a lower rate of increase; increase followed by reaching a plateau) in ITEMPO. Finally, an electron transfer mechanism was proposed for the conversion of TEMP to TEMPO by PMS. The results from this study are expected to advance the understanding of 1O2-independent formation of TEMPO in TEMP/PMS and to mitigate the interference during the detection of 1O2 by EPR.

Emission, distribution and formation characteristics of polybrominated dibenzo-p-dioxins and dibenzofurans during co-disposal of hexabromocyclododecane-containing waste in cement kiln

Hexabromocyclododecane (HBCD)-containing waste was co-disposed in a cement kiln to evaluate its destruction removal efficiency (DRE) and its impact on polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) formation. The DRE of HBCD exceeded 99.9999 %. The residual HBCD after disposal was mainly found in kiln head ash and clinker. Stack gas at kiln head and tail exhibited average PBDD/Fs emission levels (sum of 13 2,3,7,8-PBDD/Fs congeners) of 0.36 and 0.42 ng m−3, respectively, with octa-BDD predominating. However, in the kiln tail ash, hexaBDF and hepta-BDF were secondarily generated, leading to an increase in PBDFs concentration. Notably, most HBCD underwent debromination and ring-opening in the calciner, with released bromine absorbed and removed by CaO. Its decomposition products such as polycyclic aromatic hydrocarbons, biphenyls and their derivatives served as carbon sources for PBDD/Fs synthesis. However, co-disposal of HBCD did not significantly raise PBDD/Fs emissions but altered their homolog distribution from PBDDs to PBDFs. Emission factors of HBCD and PBDD/Fs were the highest in the clinker at 6.55 × 102 and 0.55 × 102 μg t−1, respectively. Therefore, attention was needed for the potential secondary release of pollutants during the transportation and utilization of clinker. These findings enhanced understanding of the distribution and formation pathways of PBDD/Fs during cement kiln co-processing, providing insights for their source control.

Tracking the coupling conversion of C1-C4 aldehydes with methanol-to-hydrocarbon reaction

Small-molecule aldehydes are promising additives to regulate product distribution in methanol-to-hydrocarbon (MTH) reaction. Herein, the co-feeding of C1-C4 aldehydes with methanol resulted in a significant increase in aromatic formation with the order: acetaldehyde > formaldehyde > propanal ≈ butanal. The mechanistic basis for this enhancement in aromatic production derived from both a direct participation pathway of aldehydes and an indirect pathway via driving the aromatic-based cycle. C2+ aldehydes could undergo multiple aldol-condensation on Brønsted acid sites to form larger alkenals, followed by sequential cyclization-dehydration reaction to cycloalkenes or aromatic species. The Prins reaction could be extended to all C1-C4 aldehydes with alkenes by generating the corresponding dienes. The hydrogen transfer from methanol to C2+ aldehydes produced C2+ olefins and formaldehyde, which would lead to extra formaldehyde-mediated aromatic formation pathway. The intricate evolution pathway of C1-C4 aldehydes in MTH reaction was constructed by detecting abundant oxygenate and hydrocarbon intermediates.

Calpain-1 weakens the nuclear envelope and promotes the release of neutrophil extracellular traps

The inducers of neutrophil extracellular trap (NET) formation are heterogeneous and consequently, there is no specific pathway or signature molecule indispensable for NET formation. But certain events such as histone modification, chromatin decondensation, nuclear envelope breakdown, and NET release are ubiquitous. During NET formation, neutrophils drastically rearrange their cytoplasmic, granular and nuclear content. Yet, the exact mechanism for decoding each step during NET formation still remains elusive. Here, we investigated the mechanism of nuclear envelope breakdown during NET formation. Immunofluorescence microscopic evaluation revealed a gradual disintegration of outer nuclear membrane protein nesprin-1 and alterations in nuclear morphology during NET formation. MALDI-TOF analysis of NETs that had been generated by various inducers detected the accumulation of nesprin-1 fragments. This suggests that nesprin-1 degradation occurs before NET release. In the presence of a calpain-1, inhibitor nesprin-1 degradation was decreased in calcium driven NET formation. Microscopic evaluation confirmed that the disintegration of the lamin B receptor (LBR) and the collapse of the actin cytoskeleton occurs in early and later phases of NET release, respectively. We conclude that the calpain-1 degrades nesprin-1, orchestrates the weakening of the nuclear membrane, contributes to LBR disintegration, and promoting DNA release and finally, NETs formation.

Carbon chain elongation characterizations of electrode-biofilm microbes in electro-fermentation

The higher efficiency of electro-fermentation in synthesizing medium-chain fatty acids (MCFAs) compared to traditional fermentation has been acknowledged. However, the functional mechanisms of electrode-biofilm enhancing MCFAs synthesis remain research gaps. To address this, this study proposed a continuous flow electrode-biofilm reactor for chain elongation (CE). After 225 days of operation, stable electrode-biofilms formed and notably improved caproate yield by more than 38 %. The electrode-biofilm was enriched with more CE microorganisms and electroactive bacteria compared to the suspended sludge microorganisms, including Caproicibacterium, Oscillibacter and Pseudoramibacter. Besides, the upregulated CE pathways were evaluated by metagenomic analysis, and the results indicated that the pathways such as acetyl-CoA and malonyl-[acp] formation, reverse beta-oxidation, and fatty acid biosynthesis pathway were all markedly enhanced in cathodic biofilm, more than anodic biofilm and suspended microorganisms. Moreover, microbial community regulated processes like bacterial chemotaxis, flagellar assembly and quorum sensing, crucial for electrode-biofilm formation. Electron transfer, energy metabolism, and microbial interactions were found to be prominently upregulated in the cathodic biofilm, surpassing levels observed in anodic biofilm and suspended sludge microorganisms, which further enhanced CE efficiency. In addition, the statistical analyses further highlighted key microbial functions and interactions within the cathodic biofilm. Oscillospiraceae_bacterium was identified to be the most active microbe, alongside pivotal roles played by Caproiciproducens_sp._NJN-50, Clostridiales_bacterium, Prevotella_sp. and Pseudoclavibacter_caeni. Eventually, the proposed microbial collaboration mechanisms of cathodic biofilm were ascertained. Overall, this study uncovered the biological effects of the electrode-biofilm on MCFAs electrosynthesis, thereby advancing biochemicals production and filling the knowledge gaps in CE electroactive biofilm reactors.

Insight into wet scavenging effects on sulfur and nitrogen containing organic compounds in urban Beijing

Sulfur-containing organic compounds (SOCs) and nitrogen-containing organic compounds (NOCs) play critical roles in regulating the physical and chemical properties of organic aerosols (OA), while the understanding of them remains limited. Here, the high-resolution real-time measurements of submicron aerosols were conducted in urban Beijing, mainly to investigate wet scavenging effects on the potential formation and evolution mechanism of OA, especially SOCs and NOCs. OA composition transitioned from being primarily SOCs before wet processes to NOCs after wet processes. Further molecular fragments identification suggested SOCs mainly comprised glycolic acid sulfate formed by aqueous-phase processing during the entire observation, and aromatic- and monoterpene-derived SOCs formed by photochemical processing before snowfall. NOCs species were diverse and dominated by highly oxidized amides and amino acids mainly produced by photochemical processing. This study provided an in-depth insight into the potential formation and evolution pathways of SOCs and NOCs in OA in the urban atmosphere.