Parent Monomer Research Articles

Unraveling Early-Stage Dynamics of Cage-to-Covalent Organic Framework Transformation at Liquid-Liquid Interface.

Postsynthetic linker exchange (PLE) has emerged as an emerging synthetic strategy for constructing high-quality covalent organic frameworks (COFs) from preassembled entities such as linear polymers, amorphous networks, COFs, and porous organic cages by using the principles of dynamic covalent chemistry. The PLE strategy has recently been extended at the liquid-liquid interface to fabricate highly crystalline two-dimensional (2D)-COF membranes at a faster time scale (24 h). Examining the early stages of the interfacial PLE dynamics becomes essential to understanding the expedited COF growth process. In this regard, pendant drop tensiometry has been employed to probe the initial reaction dynamics of the imine cage-to-COF transformation through dynamic interfacial tension (IFT) measurements. The contrasting trends in IFT profiles between PLE-mediated (from cage) and direct COF synthesis (from parent monomers) are in qualitative agreement with the kinetics of bulk-scale interfacial polymerizations. Further, the distinct early-stage interfacial behaviors between the diverse synthetic routes have been experimentally demonstrated using tensiometry, optical microscopy, electron microscopy, and powder X-ray diffraction (PXRD) analysis. The pivotal role of in situ generated imine intermediates (ImIs) and the phenomenon of spontaneous emulsification toward accelerated interfacial COF growth process was delineated. The current study on deploying the pendant drop tensiometric technique to examine early-stage interfacial polymerization dynamics opens up a gripping avenue for mechanistic exploration in PLE-based COF synthesis. The generality of the developed methodology to study the initial COF growth kinetics was extended to a new interfacial PLE-mediated cage-to-COF transformation.

Synthesis and Characterization of Novel Zirconium Oxide-Crystalline Cerium(IV)Hydrogen Phosphate/ Polybenzimidazole, Polyaniline, Polyindole, Polycarbazole, Nanocomposites

Crystalline cerium (iv) hydrogen phosphate Ce(HPO4)2.1.33H2O(CeP), and nano particles zirconium oxide(nZrO2), of average size19.3nm, were prepared and characterized by chemical , XRD, FT-IR and TGA analysis. Mixing slurry aqueous solution of nZrO2 and CeP in 25:75 wt/wt% mixing ratios, respectively, lead to formation of novel zirconium oxide-crystalline cerium phosphate nanocomposite, [ZrO2]0.25[Ce(HPO4)2]0.75.1.33H2O(nZrO2-CeP). Novel[nZrO2]0.25[CeP]0.75/ polybenzimidazole-, polyaniline-, polyindole-, and polycarbazole nanocomposites were prepared via in-situ chemical oxidation of their parent monomers. A possible explanation is part of CeP, in inorganic composite (nZrO2-CeP) was attacked by the parent monomers converted to cerium(III) orthophosphate(CePO4). The resultant nanocomposites were characterized by elemental (C,H,N) analysis , FT-IR, and scanning electron microscopy(SEM). From elemental (C,H,N) analysis. the amount of % in wt. of organic materials present in (nZrO2-CeP) nanocomposites found to be , for [polybenzimidazole(12..56%). polyaniline (16.50%) , polyindole (11.74 %), and polycarbazole (13.99 %)]. Electrical conductivity for resultant conducting polymers were investigated using DMSO solvent found to be in the range of semiconductors.

Circular plastics technologies: open loop recycling of waste plastics into new chemicals

Abstract Open-loop recycling is any recycling process where the recycled materials are converted into new raw materials, often of higher value than the parent monomers. Typically, materials recycled through open-loop recycling go on to be used for purposes different from their former, pre-recycled purpose. This means that the input into the recycling process is converted to a new chemical building block, which can be used as an input into another manufacturing process. Open-loop recycling processes usually involve processing various types of products of similar material makeup and change the properties of the material itself (through heat, chemical reactions, or physical crushing). This chapter will highlight promising pathways for upcycling of various plastic waste streams into new applications via open loop chemical and biological recycling processes.

Circular plastics technologies: depolymerization of polymers into parent monomers

Abstract While most commodity plastics were not designed to easily depolymerize, some common plastics can be broken down into their parent monomers in the presence of heat, pressure, catalysts, and/or solvent. Here, we provide a high-level overview of the depolymerization technologies that have been studied and/or scaled as promising monomer-loop recycling processes for selective plastic waste streams. Namely, commodity plastics that are considered unzippable/depolymerizable include polyethylene terephthalate, polyamides, polymethyl methacrylate, and polystyrene. Monomer-loop recycling technologies are one of several pathways toward a circular economy for plastics.

Stimulated Resonance Raman and Excited-State Dynamics in an Excitonically Coupled Bodipy Dimer: A Test for TD-DFT and the Polarizable Continuum Model.

Bodipy is one of the most versatile and studied functional dyes due to its myriad applications and tunable spectral properties. One of the strategies to adjust their properties is the formation of Bodipy dimers and oligomers whose properties differ significantly from the corresponding monomer. Recently, we have developed a novel strategy for synthesizing α,α-ethylene-bridged Bodipy dimers; however, their excited-state dynamics was heretofore unknown. This work presents the ultrafast excited-state dynamics of a novel α,α-ethylene-bridge Bodipy dimer and its monomeric parent. The dimer's steady-state absorption and fluorescence suggest a Coulombic interaction between the monomeric units' transition dipole moments (TDMs), forming what is often termed a "J-dimer". The excited-state properties of the dimer were studied using molecular excitonic theory and time-dependent density functional theory (TD-DFT). We chose the M06 exchange-correlation functional (XCF) based on its ability to reproduce the experimental oscillator strength and resonance Raman spectra. Ultrafast laser spectroscopy reveals symmetry-breaking charge separation (SB-CS) in the dimer in polar solvents and the subsequent population of the charge-separated ion-pair state. The charge separation rate falls into the normal regime, while the charge recombination is in the inverted regime. Conversely, in nonpolar solvents, the charge separation is thermodynamically not feasible. In contrast, the monomer's excited-state dynamics shows no dependence on the solvent polarity. Furthermore, we found no evidence of significant structural rearrangement upon photoexcitation, regardless of the deactivation pathway. After an extensive analysis of the electronic transitions, we concluded that the solvent fluctuations in the local environment around the dimer create an asymmetry that drives and stabilizes the charge separation. This work sheds light on the charge-transfer process in this new set of molecular systems and how excited-state dynamics can be modeled by combining the experiment and theory.

Design and synthesis of guaianolide-germacranolide heterodimers as novel anticancer agents against hepatocellular carcinoma.

Inspired by our previous finding that disesquiterpenoids showed more potent antihepatoma cytotoxicity than their corresponding parent monomers, natural product-like guaianolide-germacranolide heterodimers were designed and synthesized from guaianolide diene and germacranolides via a biomimetic Diels-Alder reaction to provide three antihepatoma active dimers with novel scaffolds. To explore the structure-activity relationship, 31 derivatives containing ester, carbamate, ether, urea, amide, and triazole functional groups at C-14' were synthesized and evaluated for their cytotoxic activities against HepG2, Huh7, and SK-Hep-1 cell lines. Among them, 25 compounds were more potent than sorafenib against HepG2 cells, 15 compounds were stronger than sorafenib against Huh7 cells, and 17 compounds were stronger than sorafenib against SK-Hep-1 cells. Compound 23 showed the most potent cytotoxicity against three hepatoma cell lines with IC50 values of 4.4 µM (HepG2), 3.7 µM (Huh7), and 3.1 µM (SK-Hep-1), which were 2.7-, 2.2-, and 2.8-fold more potent than sorafenib, respectively. The underlying mechanism study demonstrated that compound 23 could induce cell apoptosis, prevent cell migration and invasion, cause G2/M phase arrest in SK-Hep-1 cells. Network pharmacology analyses predicted PDGFRA was one of the potential targets of compound 23, and surface plasmon resonance (SPR) assay verified that 23 had strong affinity with PDGFRA with a dissociatin constant (KD) value of 90.2 nM. These promising findings revealed that structurally novel guaianolide-germacranolide heterodimers might provide a new inspiration for the discovery of antihepatoma agents.

Mono-material product design with bio-based, circular, and biodegradable polymers

Mono-material product design with bio-based, circular, and biodegradable polymers

Digital Photopatterning: Designing Functional Multipolymeric Patterning Films

This study proposes a practical patterning technique, digital photopatterning, using a commercial LCD 3D printer to integrate polymeric materials with distinct properties. A parent cross-linked film swollen by additional monomers and a photo radical initiator is irradiated area-selectively using the 3D printer. Polymerization progresses only in the irradiated areas, enabling precise control over material heterogeneity. Through exploring various combinations of parent film and monomers, we demonstrated some unique functions, such as shape morphing and arbitrary gel patterning within the film. This practical and versatile technique has the potential for various applications in materials science and engineering.

Hybrid Monomer Design Synergizing Property Trade‐offs in Developing Polymers for Circularity and Performance

AbstractCurrent search for more sustainable plastics seeks to redesign polymers possessing both chemical recyclability to monomer for a circular plastics economy and desirable performance that can rival or even exceed today's non‐recyclable or hard‐to‐recycle petroleum‐based incumbents. However, within a traditional monomer framework it is challenging to optimize, concurrently, contrasting polymerizability/depolymerizability and recyclability/performance properties. Here, we highlight the emerging hybrid monomer design strategy to develop intrinsically circular polymers with tunable performance properties, aiming to unify desired, but otherwise conflicting, properties in a single monomer. Conceptually, this design hybridizes parent monomer pairs of contrasting, mismatching, or matching properties into offspring monomers that not only unify the above‐described conflicting properties but also radically alter the resultant polymer properties far beyond the limits of what either parent homopolymers or their copolymers can achieve.

Hybrid Monomer Design Synergizing Property Trade-offs in Developing Polymers for Circularity and Performance.

Current search for more sustainable plastics seeks to redesign polymers possessing both chemical recyclability to monomer for a circular plastics economy and desirable performance that can rival or even exceed today's non-recyclable or hard-torecycle petroleum-based incumbents. However, within a traditional monomer framework it is challenging to optimize, concurrently, contrasting polymerizability/depolymerizability and recyclability/performance properties. Here, we highlight the emerging hybrid monomer design strategy to develop intrinsically circular polymers with tunable performance properties, aiming to unify desired, but otherwise conflicting, properties in a single monomer. Conceptually, this design hybridizes parent monomer pairs of contrasting, mismatching, or matching properties into offspring monomers that not only unify the above-described conflicting properties but also radically alter the resultant polymer properties far beyond the limits of what either parent homopolymers or their copolymers can achieve.

Programming Photodegradability into Vinylic Polymers via Radical Ring‐Opening Polymerization

AbstractIncorporation of photolabile moieties into the polymer backbone holds promise to remotely‐control polymer degradation. However, suitable synthetic avenues are limited, especially for radical polymerizations. Here we report a strategy to program photodegradability into vinylic polymers by exploiting the wavelength selectivity of photocycloadditions for radical ring‐opening polymerization (rROP). Irradiation of coumarin terminated allylic sulfides with UVA light initiated intramolecular [2+2] photocycloaddition producing cyclic macromonomers. Subsequent RAFT‐mediated rROP with methyl acrylate yielded copolymers that inherited the photoreactivity of the cyclic parent monomer. Irradiation with UVB initiated efficient photocycloreversion of the coumarin dimers, causing polymer degradation within minutes under UVB light or days under sunlight exposure. Our synthetic strategy may pave the way to insert photolabile linkages into vinylic polymers, tuning degradation for specific wavelengths.

Programming Photodegradability into Vinylic Polymers via Radical Ring-Opening Polymerization.

Incorporation of photolabile moieties into the polymer backbone holds promise to remotely-control polymer degradation. However, suitable synthetic avenues are limited, especially for radical polymerizations. Here we report a strategy to program photodegradability into vinylic polymers by exploiting the wavelength selectivity of photocycloadditions for radical ring-opening polymerization (rROP). Irradiation of coumarin terminated allylic sulfides with UVA light initiated intramolecular [2+2] photocycloaddition producing cyclic macromonomers. Subsequent RAFT-mediated rROP with methyl acrylate yielded copolymers that inherited the photoreactivity of the cyclic parent monomer. Irradiation with UVB initiated efficient photocycloreversion of the coumarin dimers, causing polymer degradation within minutes under UVB light or days under sunlight exposure. Our synthetic strategy may pave the way to insert photolabile linkages into vinylic polymers, tuning degradation for specific wavelengths.

Selective Lanthanide-Organic Catalyzed Depolymerization of Nylon-6 to ϵ-Caprolactam.

Nylon-6 is selectively depolymerized to the parent monomer ϵ-caprolactam by the readily accessible and commercially available lanthanide trisamido catalysts Ln(N(TMS)2 )3 (Ln=lanthanide). The depolymerization process is solvent-free, near quantitative, highly selective, and operates at the lowest Nylon-6 to ϵ-caprolactam depolymerization temperature reported to date. The catalytic activity of the different lanthanide trisamides scales with the Ln3+ ionic radius, and this process is effective with post-consumer Nylon-6 as well as with Nylon-6+polyethylene, polypropylene or polyethylene terephthalate mixtures. Experimental kinetic data and theoretical (DFT) mechanistic analyses suggest initial deprotonation of a Nylon terminal amido N-H bond, which covalently binds the catalyst to the polymer, followed by a chain-end back-biting process in which ϵ-caprolactam units are sequentially extruded from the chain end.

Selective Lanthanide‐Organic Catalyzed Depolymerization of Nylon‐6 to ϵ‐Caprolactam

AbstractNylon‐6 is selectively depolymerized to the parent monomer ϵ‐caprolactam by the readily accessible and commercially available lanthanide trisamido catalysts Ln(N(TMS)2)3(Ln=lanthanide). The depolymerization process is solvent‐free, near quantitative, highly selective, and operates at the lowest Nylon‐6 to ϵ‐caprolactam depolymerization temperature reported to date. The catalytic activity of the different lanthanide trisamides scales with the Ln3+ionic radius, and this process is effective with post‐consumer Nylon‐6 as well as with Nylon‐6+polyethylene, polypropylene or polyethylene terephthalate mixtures. Experimental kinetic data and theoretical (DFT) mechanistic analyses suggest initial deprotonation of a Nylon terminal amido N−H bond, which covalently binds the catalyst to the polymer, followed by a chain‐end back‐biting process in which ϵ‐caprolactam units are sequentially extruded from the chain end.

Rapid depolymerization of PET by employing an integrated melt-treatment and diols

Chemical recycling of poly (ethylene terephthalate) is a long-lasting challenge in the realm of plastic recycling and circularity. Glycolysis of poly (ethylene terephthalate) to its parent monomer, bis(2-hydroxyethyl) terephthalate, is a popular method that can be facilitated with a variety of catalysts, especially zinc-containing catalysts. Herein, we report the effect of using a catalyst and diols during the melt-treatment of poly (ethylene terephthalate) and subsequent glycolysis. Primarily, it has been found that pretreatment effectively eliminates the crystallinity barriers that hinder depolymerization. Additionally, the presence of the catalyst and additive during pretreatment reduced the chain length of the polymer, while creating active sites that accelerate the rate of depolymerization within the structure of the polymer. Depolymerized products were analyzed using in-line FTIR spectroscopy to monitor the reaction along with 1H NMR and liquid chromatography-mass spectrometry to quantify the compounds in the crude product. Results suggest that the addition of zinc 2-ethyl hexanoate as the internal catalyst and cyclohexanedimethanol as the additive diol during pretreatment shortened the depolymerization time from ∼7 h to only 9 min at 180 °C, thus providing a monomer yield of ∼85.4%

Characterisation of a laccase isolated from Trametes hirsuta and its application in the oligomerisation of phenolic compounds

Phenolic compounds are widely distributed in nature and industrial environment, and their detoxification or bioactive enhancement is of great value to environmental protection and industrial development. Laccases are multicopper oxidases that catalyse the oligo- or polymerisation of phenolic compounds. Identifying new laccase producers and investigating their application potential are of great importance. In this study, a white-rot fungus, Trametes hirsuta EZ1, with significantly high laccase productivity was isolated. The optimum conditions were studied for the maximum fermentation of extracellular laccase, which was achieved at 150 U/mL with a medium containing 10% strain EZ1, 7% maltodextrin, 1.5% peptone, and 0.5 mM Cu2+, and incubation at initial pH 6.0, 32 °C, and 180 rpm for nine days. Subsequently, a 70-kDa laccase was purified that showed activity over a wide range of temperature and pH, sensitivity to many metal ions and sodium dodecyl sulphate, and high tolerance to organic solvents. Purified laccase showed a significant unreported effect by catalysing catechol or ferulic acid into dimers, trimers, and tetramers or caffeic acid into dimers, trimers, tetramers, and pentamers. The oligomeric mixtures exhibited increased antioxidative capacity compared to that of each parent monomer, except for caffeic acid derivatives. Our study offers a novel strain source for laccase production and broadens its application in the enhancement of bioactive compounds.

S-Shaped Fused Azacorannulene Dimer: Structural and Redox Properties

S-Shaped Fused Azacorannulene Dimer: Structural and Redox Properties

Photophysical Properties and Electronic Structure of Hydroporphyrin Dyads Exhibiting Strong Through-Space and Through-Bond Electronic Interactions.

Electronic interactions between tetrapyrroles are utilized in natural photosynthetic systems to tune the light-harvesting and energy-/charge-transfer processes in these assemblies. Such interactions also can be employed to tailor the electronic properties of tetrapyrrolic dyads and larger arrays for use in materials science and biomedical research. Here, we have utilized static and time-resolved optical spectroscopy to characterize the optical absorption and emission properties of a set of chlorin and bacteriochlorin dyads with varying degrees of through-bond (TB) and through-space (TS) interactions between the constituent macrocycles. The dyads consist of two chlorins or two bacteriochlorins joined by a linker that utilizes a triple-double-triple-bond (enediyne) motif in which the double-bond portion is an ester-substituted ethylene or o-phenylene unit. The photophysical studies are coupled with density functional theory (DFT) calculations to probe the ground-state molecular orbital (MO) characteristics of the dyads and time-dependent DFT calculations (TDDFT) to elucidate excited-state properties. The latter include electronic characteristics of the singlet excited-state manifold and the absorption transitions to these states from the electronic ground state. A comparison of the MO and calculated spectral properties of each dyad with the linker present versus disrupted (by eliminating the double-bond portion) gives insight into the relative contributions of TB versus TS interactions to the electronic properties of the dyads. The results show that the TB and TS contributions are additive (constructively interfere), which is not always the case for molecular dyads. Most of the dyads have shorter lifetimes of the lowest singlet excited state compared to the parent monomer, which derives from increased S1 → S0 internal conversion. The enhancement is greater for the dyads in benzonitrile than in toluene. The studies provide insights into the nature of the electronic interactions between the constituents in the tetrapyrrole arrays and how these interactions dictate the spectral properties and excited-state decay characteristics.

A Dimeric Thiourea CSA for the Enantiodiscrimination of Amino Acid Derivatives by NMR Spectroscopy.

The reaction of benzoyl isothiocyanate with (1R,2R)-1,2-bis(2-hydroxyphenyl)ethylenediamine afforded a new thiourea chiral solvating agent (CSA) with a very high ability to differentiate 1H and 13C NMR signals of simple amino acid derivatives, even at low concentrations. The enantiodiscrimination efficiency was higher with respect to that of the parent monomer, a thiourea derivative of 2-((1R)-1-aminoethyl)phenol, thus putting into light the relevance of the cooperativity between the two molecular portions of the dimer in a cleft conformation stabilized by interchain hydrogen bond interactions. An achiral base additive (DABCO or DMAP) played an active role in the chiral discrimination processes, mediating the interaction between the CSA and the enantiomeric mixtures. The chiral discrimination mechanism was investigated by NMR spectroscopy through the determination of complexation stoichiometries, association constants, and the stereochemistry of the diastereomeric solvates.

Accurate Prediction of the Excited States in the Fully Conjugated Porphyrin Tapes across the Full Spectral Range: A Story of the Interplay between π-π* and Intramolecular Charge-Transfer Transitions in Soft Chromophores.

The ability of density functional theory (DFT) and time-dependent DFT (TDDFT) methods for the accurate prediction of the energies and oscillator strengths of the excited states in a series of fully conjugated meso-meso β-β β-β triple-linked porphyrin oligomers (porphyrin tapes 2-12) was probed in the gas phase and solution using several exchange-correlation functionals. It was demonstrated that the use of the hybrid B3LYP functional provides a good compromise for the accurate prediction of the localized π-π* and intramolecular charge-transfer transitions, thus allowing confident interpretation of the UV-vis-NIR spectra of porphyrin oligomers. The TDDFT-based sum-over-state (SOS) calculations for the porphyrin tape dimer 2 and trimer 3 as well as parent monomer 1 correctly predicted the signs and shapes of the magnetic circular dichroism (MCD) signals in the low-energy region of the spectra.