PAA Brushes Research Articles

Plasma-Initiated Graft Polymerization of Acrylic Acid onto Fluorine-Doped Tin Oxide as a Platform for Immobilization of Water-Oxidation Catalysts.

The discovery of new and versatile strategies for the immobilization of molecular water-oxidation catalysts (WOCs) is crucial for developing clean energy conversion devices [e.g., (photo)electrocatalytic cells for water splitting]. The traditional approach for surface attachment to transparent conductive oxides [e.g., fluorine doped tin oxide (FTO)] is via synthetic modification of the ligand architecture to incorporate functional groups such as carboxylic acids (-COOH) or phosphonates (-PO3H2) prior to immobilization. However, challenges arising from desorption and the cumbersome derivatizations steps have limited the scope and applications of surface-bound WOCs. Herein, we report the successful immobilization of underivatized Ru(II)-based WOCs (Ru-Cat1 = [Ru(tpy) (bpy) (H2O)]2+ (tpy = 2,2':6'2″-terpyridine and bpy = 2,2'-bipyridine) and Ru-Cat2 = [Ru(Mebimpy) (bpy) (H2O)]2+ (Mebimpy = 2,6-bis(1-methylbenzimidazol-2-yl) pyridine)) and the Ru(II) polypyridyl chromophore Ru-C3 = [Ru(bpy)3]2+ onto a FTO plasma-grafted poly(acrylic acid) surface (PAA|FTO). Various characterization techniques such as attenuated total reflectance Fourier transform infrared spectroscopy, scanning electron microscopy, atomic force microscopy, and cyclic voltammetry measurements provide evidence for the plasma-induced grafted PAA|FTO film and immobilization. Surface stability and electrocatalytic properties of these new hybrid composite films upon cycling were investigated at different pH values. Immobilized Ru-Cat1 and Ru-Cat2 onto PAA|FTO displayed pH-dependent (RuIII/RuII) couples and onset potentials indicative of PCET (proton-coupled electron transfer) reactions. Based on cyclic voltammetry results and spectroscopic monitoring, the immobilized WOCs Ru-Cat1 and Ru-Cat2 exhibited a higher surface stability in neutral aqueous solutions relative to Ru-C3 upon electrochemical oxidation. We attribute the surface PCET and stability to the presence of a water ligand in the coordination sphere of immobilized Ru-Cat1 and Ru-Cat2 which can H-bond with negatively charged carboxylate groups of the cross-linked PAA brushes. Our findings demonstrate that the plasma-grafted polymeric network onto FTO offers a versatile platform to directly anchor unmodified homogeneous WOCs or chromophores for potential applications in solar-to-fuel energy conversion.

Hysteretic Swelling/Deswelling of Polyelectrolyte Brushes and Bilayer Films in Response to Changes in pH and Salt Concentration.

We use a quartz crystal microbalance with dissipation (QCM-D) to investigate the swelling/de-swelling and hysteresis in brushes of weakly ionizable polyanion poly(acrylic acid) (PAA) brushes and bilayers containing a PAA brush and a poly(ethylene imine) (PEI) overlayer. We show that for a long PAA chain (Mw = 39 kDa), at low grafting density ( < 0.05 chains/nm2) and at a pH value (=4.2) at which it is partially charged, in the low-salt “osmotic brush” regime, the brush height no longer increases with increased grafting density as is seen for shorter brushes and denser grafting, but shows a slight decrease in height, in qualitative agreement with predictions of scaling theory. In a cycle of stepped pH changes, we also show that at a low grafting density of = 0.023 chains/nm2 and Mw = 39 kDa, there is hysteresis in swelling over timescales of many minutes. For higher grafting densities = 0.87 chains/nm2 and shorter chains (2 kDa), we see little or no measurable hysteresis, and, at intermediate chain length 14 kDa and grafting density = 0.06 chains/nm2, hysteresis is observed at short timescales but is greatly reduced at longer timescales. These results are similarly observed when bilayers are made by adsorbing onto the PAA brush a layer of the polycation PEI. In addition, we also note hysteresis in swelling upon changes of salt concentration when pH is fixed. These results show the rich thermodynamics and kinetics of even monolayers and bilayers of polyelectrolyte films.

Interaction of Proteins with a Planar Poly(acrylic acid) Brush: Analysis by Quartz Crystal Microbalance with Dissipation Monitoring (QCM-D)

We describe the preparation of a poly(acrylic acid) (PAA) brush, polymerized by atom transfer radical polymerization (ATRP) of tert-butyl acrylate (tBA) and subsequent acid hydrolysis, on the flat gold surfaces of quartz-crystal microbalance (QCM) crystals. The PAA brushes were characterized by Fourier transform infrared (FT-IR) spectroscopy, ellipsometry and water contact angle analysis. The interaction of the PAA brushes with human serum albumin (HSA) was studied for a range of ionic strengths and pH conditions by quartz-crystal microbalance with dissipation monitoring (QCM-D). The quantitative analysis showed a strong adsorption of protein molecules onto the PAA brush. By increasing the ionic strength, we were able to release a fraction of the initially bound HSA molecules. This finding highlights the importance of counterions in the polyelectrolyte-mediated protein adsorption/desorption. A comparison with recent calorimetric studies related to the binding of HSA to polyelectrolytes allowed us to fully analyze the QCM data based on the results of the thermodynamic analysis of the binding process.

Surface Modification of TFC-PA RO Membrane by Grafting Hydrophilic pH Switchable Poly(Acrylic Acid) Brushes

The grafting of pH-responsive poly(acrylic acid) (PAA) brushes was carried out on the surface of a commercial TFC-PA membrane using surface-initiated atom transfer radical polymerization (SI-ATRP). Poly(t-butyl acrylate) was polymerized through the SI-ATRP method followed by its acid hydrolysis to form PAA hydrophilic polymer brushes. Surface morphology, permeation flux, salt rejection, and pore sizes were investigated. The contact angle for water was reduced from 50° for a pristine membrane to 27° for the modified membrane due to a modification with the hydrophilic functional group and its brush on membrane surfaces. The flux rate also increased noticeably at lower pH values relative to higher pH for the modified membranes, while the flux remains stable in the case of pristine TFC-PA membranes. There is slight transition in the water flux rate that was also observed when going from pH values of 3 to 5. This was attributed to the pH-responsive conformational changes for the grafted PAA brushes. At these pH values, ionization of the COOH group takes place below and above pKa to influence the effective pore dimension of the modified membranes. At a lower pH value, the PAA brushes seem to permit tight structure conformation resulting in larger pore sizes and hence more flux. On the other hand, at higher pH values, PAA brushes appeared to be in extended conformation to induce smaller pore sizes and result in less flux. Further, pH values were observed to not significantly affect the NaCl salt rejection with values observed in between 98.8% and 95% and close to that of the pristine TFC-PA membranes. These experimental results are significant and have immediate implication for advances in polymer technology to design and modify the “switchable membrane surfaces” with controllable charge distribution and surface wettability, as well as regulation of water flux and salt.

How Dissociation of Carboxylic Acid Groups in a Weak Polyelectrolyte Brush Depend on Their Distance from the Substrate.

A weak polyelectrolyte brush is composed of a layer of polyacids or polybases grafted by one end of their chains to a substrate surface. For such brush layers immersed in an aqueous solution, the dissociation behavior of the acidic or basic groups and the structural and physical properties of the brush layer will thus be strongly dependent on the environmental conditions. For a polyacid brush layer consisting of, e.g., poly(acrylic acid), this means that the chains in the brush layer will be charged at high pH and uncharged at low pH. However, theoretical scaling laws not only foresee the structural changes occurring in response to the pH-induced dissociation behavior but also how the dissociation behavior of the brush layer depends on the ionic strength of the aqueous solution and the density of acidic groups within the brush layer. We have herein employed spectroscopic ellipsometry and a quartz crystal microbalance with dissipation monitoring (QCM-D) to experimentally evaluate the theoretically predicted dissociation and structural behavior of PAA brushes. Spectroscopic ellipsometry allows us to study the brush thickness as a function of pH and ionic strength, while QCM-D gives us an opportunity to investigate the swelling behavior of PAA brushes at various penetration depths of propagating acoustic waves. Our studies show that the dissociation degree of the carboxylic acid groups in a PAA brush increases with increasing distance from the substrate. Moreover, the ionic strength enhances carboxylic acid dissociation, such that a higher ionic strength leads to a narrower distribution and higher average dissociation degree. In conclusion, our results provide an experimental verification of the theoretically predicted gradient in the degree of dissociation of the acid groups in weak polyacid brush layers and shows that at a pH value equal to approximately the average pKa value of the brush, the state of the acid groups varies from being almost uncharged to almost fully dissociated depending on the ionic strength and vertical position in the brush.

Responsive Adsorption of N-Isopropylacrylamide Based Copolymers on Polymer Brushes.

We investigate the adsorption of pH- or temperature-responsive polymer systems by ellipsometry and neutron reflectivity. To this end, temperature-responsive poly (N-isopropylacrylamide) (PNIPAM) brushes and pH-responsive poly (acrylic acid) (PAA) brushes have been prepared using the “grafting onto” method to investigate the adsorption process of polymers and its reversibility under controlled environment. To that purpose, macromolecular brushes were designed with various chain lengths and a wide range of grafting density. Below the transition temperature (LCST), the characterization of PNIPAM brushes by neutron reflectivity shows that the swelling behavior of brushes is in good agreement with the scaling models before they collapse above the LCST. The reversible adsorption on PNIPAM brushes was carried out with linear copolymers of N-isopropylacrylamide and acrylic acid, P(NIPAM-co-AA). While these copolymers remain fully soluble in water over the whole range of temperature investigated, a quantitative adsorption driven by solvophobic interactions was shown to proceed only above the LCST of the brush and to be totally reversible upon cooling. Similarly, the pH-responsive adsorption driven by electrostatic interactions on PAA brushes was studied with copolymers of NIPAM and N,N-dimethylaminopropylmethacrylamide, P(NIPAM-co-MADAP). In this case, the adsorption of weak polycations was shown to increase with the ionization of the PAA brush with interactions mainly located in the upper part of the brush at pH 7 and more deeply adsorbed within the brush at pH 9.

Mechanochemical Degrafting of a Surface-Tethered Poly(acrylic acid) Brush Promoted Etching of Its Underlying Silicon Substrate.

The stability of surface-tethered polyelectrolyte brushes has been investigated during the past few years. We have previously reported on the degrafting of poly(acrylic acid) (PAA) polymer brushes from flat silicon substrates. Here, we present a detailed study on the effects of NaCl concentration and the grafting density and molecular weight on the stability of PAA brushes during incubation in 0.1 M ethanolamine buffer (pH 9.0) solutions. Without NaCl in the buffer solution, the PAA brushes remain intact. Adding NaCl facilitates etching of the substrate due to accelerating dissolution of the top silica layer and promoting degrafting of the PAA chains. The PAA grafting density and molecular weight play an important role in the substrate etching by affecting the penetration barrier and local concentration of the etchants. We also tested the stability of self-assembled monolayers (SAMs) made of hydrophobic alkyltrichlorosilanes anchored on silicon substrates. The results demonstrated that the SAMs were too thin to protect the substrates from etching, in contrast to thick poly(methyl methacrylate) brushes. Our findings suggest that both polymer brushes (especially polyelectrolyte brushes) and SAMs anchored to silicon substrates may undergo erosion/etching on the substrates in basic environments, which compromises their stability and therefore jeopardizes their applications in coating, biosensing, and so forth.

Nanostructured switchable pH-responsive membranes prepared via spherical polyelectrolyte brushes

A nano-porous and switchable pH-responsive polymeric membrane was fabricated through filtration technique with the assist of metal hydroxide nanostrands as template. A common used spherical polyelectrolyte brush (SPB), PAA@PS (poly (acrylic acid)) brushes grafted on polystyrene nanospheres, employed in this work as polymeric membrane. It features tunable pore size on line by shrinkage or stretching of PAA brushes under different pH value or ionic strength. Furthermore, both the length of PAA chains and the dimension of PS cores could tailor the pore size of the membrane effectively. These properties of PAA@PS membrane could separate nanoparticles within 10 nm with precise size-selective permeation. Meanwhile, since the membrane was endowed negative charge by PAA brushes, the membrane could adsorb and separate positive charge nanoparticles including dyes though the mixture solution effectively. Herein, this stimuli-responsive membrane is promising in the separation of ultrafine nanoparticles with precise size and charge selectivity.

Controlled Fabrication of Micropatterned Supramolecular Gels by Directed Self-Assembly of Small Molecular Gelators.

Herein, the micropatterning of supramolecular gels with oriented growth direction and controllable spatial dimensions by directing the self-assembly of small molecular gelators is reported. This process is associated with an acid-catalyzed formation of gelators from two soluble precursor molecules. To control the localized formation and self-assembly of gelators, micropatterned poly(acrylic acid) (PAA) brushes are employed to create a local and controllable acidic environment. The results show that the gel formation can be well confined in the catalytic surface plane with dimensions ranging from micro- to centimeter. Furthermore, the gels show a preferential growth along the normal direction of the catalytic surface, and the thickness of the resultant gel patterns can be easily controlled by tuning the grafting density of PAA brushes. This work shows an effective "bottom-up" strategy toward control over the spatial organization of materials and is expected to find promising applications in, e.g., microelectronics, tissue engineering, and biomedicine.

How do immobilised cell-adhesive Arg–Gly–Asp-containing peptides behave at the PAA brush surface?

ABSTRACTBio-engineered surfaces that aim to induce normal cell behaviour in vitro need to ‘mimic’ the extracellular matrix in a way that allows cell adhesion. In this computational work, several model cell-binding peptides with a minimal cell-adhesive Arg–Gly–Asp sequence are investigated in the bulk as well as immobilised on a soft surface. For this reason, a combination of density functional theory and all-atom MD simulations is applied. The major goal of the modelling is to characterise the accessibility of the cell-recognition motif on the functionalised soft polymer surface. As a reference system, the behaviour of three peptide sequences is preliminarily studied in explicit water simulations. From the analysis of the MD trajectories, the solvent accessible surface area, the distribution of water molecules around peptide groups, the secondary structure and the thermodynamics of hydration are evaluated. Furthermore, each peptide is immobilised on the surface of a homopolymer poly(acrylic acid) brush. During MD simulations, all three peptides approach closely toward PAA brush, and their surface accessibility is characterised. Although the peptides are adsorbed onto the brush, they are not hidden by the polymer strands, with RGD unit accessible on the surface and available for guided cell adhesion.

Interaction of calmodulin with poly(acrylic acid) brushes: Effects of high pressure, pH-value and ligand binding.

Poly(acrylic acid) (PAA) brushes are well-known to interact with proteins in an ionic strength-dependent way. Moreover, they provide a native-like environment that largely maintains the secondary structure and biological activity of adsorbed proteins. Recently, it has been shown that the application of high pressure can lead to a reduced protein adsorption at a PAA brush in the case of a positively charged protein. Here, we analyze the effect of pressure on the interactions between a protein and a PAA brush in more detail. We use calmodulin as model protein that has a negative net charge at neutral pH-value and determine the degree of adsorption at a planar PAA brush applying total internal reflection fluorescence (TIRF) spectroscopy. Remarkably, the degree of calmodulin adsorption at a PAA brush is increasing with increasing pressure, when the protein is negatively charged. However, at low pH-value, where calmodulin is positively charged, high pressure leads to a partial desorption of the protein. Moreover, in the presence of trifluoperazine, which binds to calmodulin as a ligand, the pressure effect is diminished. The results of this study indicate that protein adsorption at a PAA brush at the "wrong" side of the isoelectric point, i.e. under net electrostatic repulsion, can involve a volume reduction that is favored under high pressure. It is suggested that this volume reduction is related to a hydration of counterions that are released from the PAA chains and the protein surface. In contrast, at pH-values close to the isoelectric point, the obtained data are consistent with a charge regulation mechanism that involves a volume increase. Thus, the application of high pressure in combination with pH-variation, as carried out in this study, provides the volume changes of adsorption that need to be consistent with any proposed mechanism of protein interaction with a PAA brush.

Visualization of Mechanochemically-Assisted Degrafting of Surface-Tethered Poly(Acrylic Acid) Brushes.

We report visualization of mechanochemically assisted degrafting of surface-tethered poly(acrylic acid) (PAA) brushes in a basic aqueous buffer at nanometer to micrometer length scale by monitoring changes in local etching of silicon substrates. PAA brushes were prepared by surface-initiated atom transfer radical polymerization and incubated in 0.1 M ethanolamine buffer (pH 9.0) with 0.5 M NaCl. Morphological changes of the underlying substrates were monitored by scanning electron microscopy and atomic force microscopy. The appearance of regular-shaped pits indicated etching of the substrate, and both their number and size grew with increasing incubation time. We compared the etching behaviors for PAA, poly(methyl methacrylate) (PMMA), and poly(poly(ethylene glycol) methacrylate) (PPEGMA) brushes grafted on silicon substrates. After incubation for 7 days, the substrate of PMMA brush remained intact. In PAA brush systems, we detected the formation of a few large pits whose size grew in time. Many pits showed up on the substrate of PPEGMA brush but with substantially smaller size compared to PAA. Our findings suggest that hydrophobicity and stability of the grafted polymers play an important role in the morphological changes of the underlying silicon substrates under given incubation conditions.

PH-sensitive polymer-gated multifunctional upconversion NaYF4:Yb/Er@mSiO2 nanocomposite for oral drug delivery

Multifunctional nanocomposite have received much attention due to their potential applications in controlled drug delivery systems. Herein, multifunctional UCNPs@mSiO2-PAA nanocomposite with UCNPs as core and poly (acrylic acid) (PAA)-gated mesoporous silica as shell were fabricated for oral drug delivery. The results demonstrated that the mesoporous silica shell (∼20 nm) uniformly coated on the UCNPs, and the PAA brushes were covalently attached on the pore mouths of mesoporous silica shell. The in vitro drug release results exhibited that the doxorubicin (DOX) molecules were almost encapsulated in the locked pores in simulated gastric fluid (SGF, pH = 1.2) due to the capping effect of PAA brushes, while the DOX could easily diffuse from the opened pores in phosphate buffer solution (PBS, pH = 7.4) due to the removing of the capping. These results indicating that the PAA brushes can be employed as gatekeepers to control the drug transport in and out of the pore channels of UCNPs@mSiO2-PAA. Moreover, the drug release process can be monitored by the changes of fluorescence intensity under the NIR light laser excitation. We anticipate that the multifunctional nanocomposite can be used as nanocarrier for control and tracking of drug release in oral drug delivery systems.

Ordering pH‐Responsive Polyelectrolyte‐Grafted Nanoparticles in a Flow Coating Process

AbstractThe effects of nanoscale particle interactions on deposition patterns in the flow coating process are investigated using pH‐responsive poly(acrylic acid) (PAA)‐grafted silica nanoparticles. Interactions between nanoparticles are effectively controlled by grafting densities, PAA brush lengths, and pH, in addition to hydrogen bonding between free polyvinylpyrrolidone (PVP) and PAA. Consequently, various intriguing patterns of randomly distributed dots, polygonal networks, meshes, fork‐like structures along with highly regulated and densely packed stripes parallel to the moving direction of substrates are fabricated. Per se, the flow coating process is shown to form regulated patterns during evaporation by controlling particle–particle interactions with inherent brush properties and external pH.

Silica nanoparticles coated by poly(acrylic acid) brushes via host-guest interactions for detecting DNA sequence of Hepatitis B virus

Poly(acrylic acid) (PAA) brushes coated onto silica nanoparticles have been widely utilized in bioassays due to their abilities of providing favorable microenvironments and ensuring good biological activities for biomolecules. However, traditional PAA brushes are synthesized by reversible addition–fragmentation chain transfer polymerization. Hence, it is generally difficult to control and characterize the molecular weight of the PAA brushes, which may depress the reproducibility and bring more uncertain results. Herein, atom transfer radical polymerization method is employed to synthesize β-cyclodextrin-cored PAA with uniform and controllable molecular weight. After loading on the surfaces of adamantane-functionalized silica nanoparticles via host-guest interactions, glucose oxidase and probe single strand DNA (ssDNA) are further immobilized on the as-prepared nanoparticles. Meanwhile, capture ssDNA is functionalized on amino modified magnetic beads. In the presence of ssDNA sequence of Hepatitis B Virus (HBV) containing completely matched sequence of both probe and capture ssDNA, a bioconjugate is formed and can be separated by an external magnet. The isolated glucose oxidase can further catalyze glucose into gluconic acid and H2O2, and then reduce HAuCl4 on Au seeds. By monitoring the absorption intensity change of the Au NPs at 530nm, the proposed biosensor with novel signal amplification probes can be used to detect DNA sequence of HBV with high sensitivity and selectivity in both buffer and serum samples. This developed strategy has presented a new way to construct silica nanoparticles coated by PAA brushes for the fields of clinical diagnosis and other life sciences.

Nanomechanics of pH-Responsive, Drug-Loaded, Bilayered Polymer Grafts.

Stimuli-responsive polymer films play an important role in the development of smart antibacterial coatings. In this study, we consider complementary architectures of polyelectrolyte films, including a thin chitosan layer (CH), poly(acrylic acid) (PAA) brushes, and a bilayer structure of CH grafted to PAA brushes (CH/PAA) as possible candidates for targeted drug delivery platforms. Atomic force microscopy (AFM) was employed to study the structure-mechanical property relationship for these mono- and bi-layered polymer grafts at pH 7.4 and 4.0, corresponding to physiological and biofilm formation conditions, respectively. Herein, the surface interactions between polymer grafts and the negatively charged silica colloid attached to an AFM lever are considered as representative interactions between the antibacterial coating and a bacteria/biofilm. The bilayered structure of CH/PAA showed significantly reduced adhesive interactions in comparison to pure CH but slightly higher interactions in comparison to PAA films. Among PAA and CH/PAA films, upon grafting CH over the PAA brushes, the normal stiffness increased by 10-fold at pH 7.4 and 20-fold at pH 4.0. Notably, the study also showed that the addition of an antibiotic drug such as multicationic Tobramycin (TOB) impacts the mechanical properties of the antibacterial coatings. Competition between TOB and water molecules for the PAA chains is shown to determine the structural properties of PAA and CH/PAA films loaded with TOB. At high pH (7.4), the TOB molecules, which remain multicationic, strongly interact with polyanionic PAA, thereby reducing the film's compressibility. On the contrary, at low pH (4.0), the water molecules preferentially interact with TOB in comparison to uncharged PAA chains and, upon TOB release, results in a stronger film collapse together with an increase in adhesive interactions between the probe, the surface, and the elastic modulus of the film. The bacterial proliferation on these platforms when compared to the measured mechanical properties shows a direct correlation; hence, understanding nanomechanical properties can provide insights into designing new antibacterial polymer coatings.

In Situ Monitoring of Linear RGD-Peptide Bioconjugation with Nanoscale Polymer Brushes.

Bioinspired materials mimicking the native extracellular matrix environment are promising for biotechnological applications. Particularly, modular biosurface engineering based on the functionalization of stimuli-responsive polymer brushes with peptide sequences can be used for the development of smart surfaces with biomimetic cues. The key aspect of this study is the in situ monitoring and analytical verification of the biofunctionalization process on the basis of three complementary analytical techniques. In situ spectroscopic ellipsometry was used to quantify the amount of chemisorbed GRGDS at both the homopolymer poly(acrylic acid) (PAA) brush and the binary poly(N-isopropylacrylamide) (PNIPAAm)–PAA brushes, which was finally confirmed by an acidic hydrolysis combined with a subsequent reverse-phase high-performance liquid chromatography analysis. In situ attenuated total reflection-Fourier transform infrared spectroscopy provided a step-by-step detection of the biofunctionalization process so that an optimized protocol for the bioconjugation of GRGDS could be identified. The optimized protocol was used to create a temperature-responsive binary brush with a high amount of chemisorbed GRGDS, which is a promising candidate for the temperature-sensitive control of GRGDS presentation in further cell-instructive studies.

PH-responsive poly (acrylic acid)-gated mesoporous silica and its application in oral colon targeted drug delivery for doxorubicin

Oral chemotherapy is the preferred route for cancer treatment because it can improve the efficacy and decrease the side effects. Unfortunately, most anticancer drugs suffered from their poor oral bioavailability. Herein, we construct a novel pH-triggered oral drug delivery system by capping of mesoporous silica SBA-15 with pH-responsive polymer poly (acrylic acid) (PAA) via a facile graft-onto strategy. The experiment results demonstrated that the PAA brushes were anchored on the pore outlets of mesoporous silica SBA-15, which can be acted as the gatekeeper to control the drug molecules transport in and out of the pore channels. The PAA capped mesoporous SBA-15 (PAA/SBA-15) exhibited a high drug loading capacity (785.7mg/g), excellent pH-sensitivity and good biocompatibility. In gastric environment (pH=2.0), the drug doxorubicin (DOX) molecules were encapsulated in the pore channels because the pore outlets were capped with collapsed PAA. In contrast, in colonic environment (pH=7.6), it exhibited a fast release because of the removal of capping. In addition, the water solubility of DOX in colonic environment was enhanced after DOX being loaded into the pores of PAA/SBA-15. This pH-triggered oral drug delivery system has promising applications for treatment of colon cancer and other colon diseases.

Effect of High Pressure on Protein Binding to Poly(Acrylic Acid) Brushes

Polyelectrolyte brushes can provide a native-like environment for the immobilization of proteins at aqueous-solid interfaces. In particular, poly(acrylic acid) (PAA) brushes have been shown to preserve the secondary structure of proteins and maintain enzyme activity to a high degree. Moreover, the degree of protein adsorption at a PAA brush can be controlled by the ionic strength of the protein solution. Here, we investigate the effect of pressure on the degree of protein binding at a PAA brush.

Single-chain-in-mean-field simulations of weak polyelectrolyte brushes.

Structural properties of brushes which are composed of weak acidic and basic polyelectrolytes are studied in the framework of a particle-based approach that implicitly accounts for the solvent quality. Using a semi-grandcanonical partition function in the framework of the Single-Chain-in-Mean-Field (SCMF) algorithm, the weak polyelectrolyte is conceived as a supramolecular mixture of polymers in different dissociation states, which are explicitly treated in the partition function and sampled by the SCMF procedure. One obtains a local expression for the equilibrium acid-base reaction responsible for the regulation of the charged groups that is also incorporated to the SCMF sampling. Coupled to a simultaneous treatment of the electrostatics, the approach is shown to capture the main features of weak polyelectrolyte brushes as a function of the bulk pH in the solution, the salt concentration, and the grafting density. Results are compared to experimental and theoretical works from the literature using coarse-grained representations of poly(acrylic acid) (PAA) and poly(2-vinyl pyridine) (P2VP) polymer-based brushes. As the Born self-energy of ions can be straightforwardly included in the numerical approach, we also study its effect on the local charge regulation mechanism of the brush. We find that its effect becomes significant when the brush is dense and exposed to high salt concentrations. The numerical methodology is then applied (1) to the study of the kinetics of collapse/swelling of a P2VP brush and (2) to the ability of an applied voltage to induce collapse/swelling of a PAA brush in a pH range close to the pKa value of the polymer.