P-nitrophenyl Esters Research Articles

Characterization of a novel thermophilic pyrethroid-hydrolyzing carboxylesterase from Sulfolobus tokodaii into a new family

Abstract A novel gene ST2026 encoding a putative carboxylesterase from the thermophilic crenarchaeota Sulfolobus tokodaii (named EstSt7) was cloned and functionally overexpressed in Escherichia coli. The recombinant enzyme was purified to homogeneity after heat treatment, Ni-NTA affinity and Superdex-200 gel filtration chromatography. EstSt7 showed maximum activity at 80 °C over 30 min and had a half-life of 180 min at 90 °C. Its enzymatic activity was stable in the pH range of 8.0–10.0 with an optimum at 9.0. The enzyme exhibited significant esterase activity toward various p-nitrophenyl esters and the most preferable substrate was p-nitrophenyl butyrate (kcat/Km of 246.3 s−1 mM−1). In addition, EstSt7 showed high activity and stability against organic solvents (20% and 50% v/v) and detergents (1% and 5% v/v). Furthermore, EstSt7 could efficiently hydrolyze a wide range of synthetic pyrethroids including fenpropathrin, permethrin, cypermethrin, cyhalothrin, deltamethrin and bifenthrin, which makes it a potential candidate for the detoxification of pyrethroids for the purpose of biodegradation. Sequence alignment, phylogenetic analysis and comparison of the conserved motif reveal that this novel carboxylesterase EstSt7 should be grouped into a new bacterial lipase and esterase family.

A Cold-Adapted and Organic Solvent-Tolerant Lipase from a Psychrotrophic Bacterium Pseudomonas sp. Strain YY31: Identification, Cloning, and Characterization

A novel cold-adapted lipase (designated as LipYY31) was obtained from a psychrotrophic Pseudomonas sp. YY31. The strain YY31 was gram-negative, rod shaped, motile by means of one polar flagellum, and exhibited chemotaxis toward oil droplets under a microscope. The strain displayed remarkable degradation of edible oil and fat even at 5 °C. The LipYY31 DNA fragment contains an open reading frame of 1,410 bp which encoded a protein of 470 amino acids with an estimated molecular mass of 49,584 Da. LipYY31 showed high sequence similarity to those of subfamily Ι.3 lipase and had a conserved GXSXG motif around the catalytic Ser residue. Its optimal temperature was 25-30 °C, and it retained 20-40 % of its activity at 0-5 °C. The optimal pH value was 8.0. The activity was strongly inhibited by Cd(2+), Zn(2+), EDTA and was highly dependent on Ca(2+). Tricaprin and p-nitrophenyl caprate were the most favorable substrates among the triglycerides and p-nitrophenyl esters, respectively. LipYY31 also had high activity towards natural substrates including edible vegetable oils and animal fat. Furthermore, LipYY31 was very active and stable in the presence of several detergents and organic solvents. In particular, the lipase exhibited high stability against organic solvents such as methanol, ethanol, and isopropanol.

Identification and Characterization of a Periplasmic Aminoacyl-phosphatidylglycerol Hydrolase Responsible for Pseudomonas aeruginosa Lipid Homeostasis*

Specific aminoacylation of the phospholipid phosphatidylglycerol (PG) with alanine (or with lysine) was shown to render various organisms less susceptible to antimicrobial agents and environmental stresses. In this study, we make use of the opportunistic pathogen Pseudomonas aeruginosa to decode ORF PA0919-dependent lipid homeostasis. Analysis of the polar lipid content of the deletion mutant ΔPA0919 indicated significantly enlarged levels of alanyl-PG. The resulting phenotype manifested an increased susceptibility to several antimicrobial compounds when compared with the wild type. A pH-dependent PA0919 promoter located within the upstream gene PA0920 was identified. Localization experiments demonstrated that the PA0919 protein is anchored to the periplasmic surface of the inner bacterial membrane. The recombinant overproduction of wild type and several site-directed mutant proteins in the periplasm of Escherichia coli facilitated a detailed in vitro analysis of the enzymatic PA0919 function. A series of artificial substrates (p-nitrophenyl esters of various amino acids/aliphatic acids) indicated enzymatic hydrolysis of the alanine, glycine, or lysine moiety of the respective ester substrates. Our final in vitro activity assay in the presence of radioactively labeled alanyl-PG then revealed hydrolysis of the aminoacyl linkage, resulting in the formation of alanine and PG. Consequently, PA0919 was termed alanyl-PG hydrolase. The elucidated enzymatic activity implies a new regulatory circuit for the appropriate tuning of cellular alanyl-PG concentrations.

Single residues dictate the co-evolution of dual esterases: MCP hydrolases from the α/β hydrolase family

Several members of the C-C MCP (meta-cleavage product) hydrolase family demonstrate an unusual ability to hydrolyse esters as well as the MCPs (including those from mono- and bi-cyclic aromatics). Although the molecular mechanisms responsible for such substrate promiscuity are starting to emerge, the full understanding of these complex enzymes is far from complete. In the present paper, we describe six distinct α/β hydrolases identified through genomic approaches, four of which demonstrate the unprecedented characteristic of activity towards a broad spectrum of substrates, including p-nitrophenyl, halogenated, fatty acyl, aryl, glycerol, cinnamoyl and carbohydrate esters, lactones, 2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoate and 2-hydroxy-6-oxohepta-2,4-dienoate. Using structural analysis and site-directed mutagenesis we have identified the three residues (Ser32, Val130 and Trp144) that determine the unusual substrate specificity of one of these proteins, CCSP0084. The results may open up new research avenues into comparative catalytic models, structural and mechanistic studies, and biotechnological applications of MCP hydrolases.

Characterization of a cold-adapted and salt-tolerant esterase from a psychrotrophic bacterium Psychrobacter pacificensis

An esterase gene, est10, was identified from the genomic library of a deep-sea psychrotrophic bacterium Psychrobacter pacificensis. The esterase exhibited the optimal activity around 25 °C and pH 7.5, and maintained as high as 55.0 % of its maximum activity at 0 °C, indicating its cold adaptation. Est10 was fairly stable under room temperatures, retaining more than 80 % of its original activity after incubation at 40 °C for 2 h. The highest activity was observed against the short-chain substrate p-nitrophenyl butyrate (C4) among the tested p-nitrophenyl esters (C2-C16). It was slightly activated at a low concentration (1 mM) of Zn(2+), Mg(2+), Ba(2+), Ca(2+), Cu(2+), Fe(3+), urea and EDTA, but was inhibited by DTT and totally inactivated by PMSF. Interestingly, increased salinity considerably stimulated Est10 activity (up to 143.2 % of original activity at 2 M NaCl) and stability (up to 126.4 % after incubation with 5 M NaCl for 6.5 h), proving its salt tolerance. 0.05 and 0.1 % Tween 20, Tween 80, Triton X-100 and CHAPS increased the activity and stability of Est10 while SDS, CTAB had the opposite effect. Est10 was quite active after incubation with several 30 % organic solvents (methanol, DMSO, ethanediol) but exhibited little activity with 30 % isopropanol, ethanol, n-butanol and acetonitrile.

Functional characterisation of a metagenome derived family VIII esterase with a deacetylation activity on β-lactam antibiotics

Family VIII esterases represent a poorly characterised esterase family, with high sequence identity to class C β-lactamases, peptidases and penicillin binding proteins. This study reports on the metagenomic library screening and biochemical characterisation of a novel esterase (Est22) derived from an acidic Leachate environment. The enzyme is 423 amino acids in length and contained 22 aa signal peptide. The Est22 primary structure revealed the presence of N-terminus S-x-x-K sequence, which is also highly conserved in class C β-lactamases, peptidases as well as carboxylesterases belonging to family VIII. Phylogenetic analysis using the representative sequences from class C β-lactamases and family VIII esterases indicated that Est22 is a member of family VIII esterases. Substrate specificity profiling using p-nitrophenyl esters (C2–C16) indicated that Est22 preferred shorter chain p-nitrophenyl esters (C2–C5), a characteristic that is typical for true carboxylesterases. In addition of hydrolysing Nitrocefin, Est22 also hydrolysed first generation cephalosporin based derivatives. Detailed selectivity study using different cephalosporin based substrates indicated that Est22 selectively hydrolyse the ester bond of a cephalosporin derivatives leaving the amide bond of the β-lactam ring intact. The selective nature of Est22 makes this enzyme a potential candidate for the use in the synthesis and modification cephalosporin based molecules.

Cloning, expression, purification, and characterization of a thermostable esterase from the archaeon Sulfolobus solfataricus P1

A genomic library of the thermoacidophilic archaeon Sulfolobus solfataricus P1 was constructed using 3–5 kb BamHI-fragments into pUC118 vector and the recombinant plasmids were hosted in Escherichia coli. One positive clone showing thermostable esterase activity was directly selected on tributyrin-emulsified agar plates. The open reading frame of the esterase gene isolated from this clone was composed of 942 nucleotides encoding 314 amino acids. The recombinant enzyme stably expressed in E. coli was purified to apparent homogeneity by two column chromatographies using butyl Sepharose followed by Q-Sepharose. The molecular mass of the enzyme, estimated to be approximately 35 kDa by sodium dodecyl sulfate polyacrylamide gel electrophoresis and gel filtration, agreed with that deduced by sequence analysis (34,260 Da). Maximal activity was observed at 80 °C and pH 8.0. The enzyme was extremely stable without significant change in its activity up to 120 h at 50 °C, and even at 80 °C almost 30% of its activity remained after 120 h. Among the p-nitrophenyl esters (C4–C16) tested, the best substrate was p-nitrophenyl caprate (C10) with Km and kcat values of 24.0 mM and 2337 s−1, respectively. At 30 °C, the enzyme displayed remarkable stability against up to 90% methanol, ethanol, and 2-propanol, and also withstood, to a certain extent, 5% SDS and 8 M urea. Site-directed mutagenesis revealed that the enzyme contains a catalytic triad composed of Ser144, Asp266, and His295 in the active site. The S. solfataricus P1 esterase is an archaeal esterase grouped into family V as well as B-type esterases.

Characterization of a new and thermostable esterase from a metagenomic library

A new gene encoding an esterase (designated as EstEP16) was identified from a metagenomic library prepared from a sediment sample collected from a deep-sea hydrothermal field in east Pacific. The open reading frame of this gene encoded 249 amino acid residues. It was cloned, overexpressed in Escherichia coli, and the recombinant protein was purified to homogeneity. The monomeric EstEP16 presented a molecular mass of 51.7kDa. Enzyme assays using p-nitrophenyl esters with different acyl chain lengths as the substrates confirmed its esterase activity, yielding highest specific activity with p-nitrophenyl acetate. When p-nitrophenyl butyrate was used as a substrate, recombinant EstEP16 exhibited highest activity at pH 8.0 and 60°C. The recombinant enzyme retained about 80% residual activity after incubation at 90°C for 6h, which indicated that EstEP16 was thermostable. Homology modeling of EstEP16 was developed with the monoacylglycerol lipase from Bacillus sp. H-257 as a template. The structure showed an α/β-hydrolase fold and indicated the presence of a typical catalytic triad. The activity of EstEP16 was inhibited by addition of phenylmethylsulfonyl fluoride, indicating that it contains serine residue, which plays a key role in the catalytic mechanism.

Influence of ammonium salts on the lipase/esterase activity assay using p‐nitrophenyl esters as substrates

p-Nitrophenyl esters with a short-chain carboxylic group, such as p-nitrophenyl acetate (p-NPA) and p-nitrophenyl butyrate (p-NPB), could be effectively hydrolyzed by ammonium salts. p-Nitrophenyl esters were usually used as substrates to assay the lipase/esterase activity. Ammonium sulfate precipitation was often used to purify proteins, and some ammonium salts were usually used as nitrogen sources or inorganic salts for the lipase/esterase production. To study the effect of ammonium salts on the assay of the lipase/esterase activity, the contributing factors of hydrolysis of p-NPA/p-NPB catalyzed by ammonium salts were investigated. The lipase activities were compared in the presence and absence of ammonium sulfate. The hydrolysis reaction could be catalyzed under neutral and alkaline circumstances. The hydrolysis rate increased with the increase in the reaction temperature or the concentration of ammonium ion. When p-NPA was employed as the substrate for the analysis of the lipase/esterase activity, the effect of ammonium sulfate on the analysis could be neutralized by setting a control when the concentration of ammonium sulfate was less than 40% saturation. However, when the concentration of ammonium sulfate increased from 40% to 100% saturation, the enzyme activities decreased about 13-40%, which could not be ignored for accurate analysis of the enzyme activity.

A Novel Alkaliphilic Bacillus Esterase Belongs to the 13th Bacterial Lipolytic Enzyme Family

BackgroundMicrobial derived lipolytic hydrolysts are an important class of biocatalysts because of their huge abundance and ability to display bioactivities under extreme conditions. In spite of recent advances, our understanding of these enzymes remains rudimentary. The aim of our research is to advance our understanding by seeking for more unusual lipid hydrolysts and revealing their molecular structure and bioactivities.Methodology/Principal FindingsBacillus. pseudofirmus OF4 is an extreme alkaliphile with tolerance of pH up to 11. In this work we successfully undertook a heterologous expression of a gene estof4 from the alkaliphilic B. pseudofirmus sp OF4. The recombinant protein called EstOF4 was purified into a homologous product by Ni-NTA affinity and gel filtration. The purified EstOF4 was active as dimer with the molecular weight of 64 KDa. It hydrolyzed a wide range of substrates including p-nitrophenyl esters (C2–C12) and triglycerides (C2–C6). Its optimal performance occurred at pH 8.5 and 50°C towards p-nitrophenyl caproate and triacetin. Sequence alignment revealed that EstOF4 shared 71% identity to esterase Est30 from Geobacillus stearothermophilus with a typical lipase pentapeptide motif G91LS93LG95. A structural model developed from homology modeling revealed that EstOF4 possessed a typical esterase 6α/7β hydrolase fold and a cap domain. Site-directed mutagenesis and inhibition studies confirmed the putative catalytic triad Ser93, Asp190 and His220.ConclusionEstOF4 is a new bacterial esterase with a preference to short chain ester substrates. With a high sequence identity towards esterase Est30 and several others, EstOF4 was classified into the same bacterial lipolytic family, Family XIII. All the members in this family originate from the same bacterial genus, bacillus and display optimal activities from neutral pH to alkaline conditions with short and middle chain length substrates. However, with roughly 70% sequence identity, these enzymes showed hugely different thermal stabilities, indicating their diverse thermal adaptations via just changing a few amino acid residues.

Molecular cloning of a novel bioH gene from an environmental metagenome encoding a carboxylesterase with exceptional tolerance to organic solvents

BackgroundBioH is one of the key enzymes to produce the precursor pimeloyl-ACP to initiate biotin biosynthesis de novo in bacteria. To date, very few bioH genes have been characterized. In this study, we cloned and identified a novel bioH gene, bioHx, from an environmental metagenome by a functional metagenomic approach. The bioHx gene, encoding an enzyme that is capable of hydrolysis of p-nitrophenyl esters of fatty acids, was expressed in Escherichia coli BL21 using the pET expression system. The biochemical property of the purified BioHx protein was also investigated.ResultsScreening of an unamplified metagenomic library with a tributyrin-containing medium led to the isolation of a clone exhibiting lipolytic activity. This clone carried a 4,570-bp DNA fragment encoding for six genes, designated bioF, bioHx, fabG, bioC, orf5 and sdh, four of which were implicated in the de novo biotin biosynthesis. The bioHx gene encodes a protein of 259 aa with a calculated molecular mass of 28.60 kDa, displaying 24-39% amino acid sequence identity to a few characterized bacterial BioH enzymes. It contains a pentapeptide motif (Gly76-Trp77-Ser78-Met79-Gly80) and a catalytic triad (Ser78-His230-Asp202), both of which are characteristic for lipolytic enzymes. BioHx was expressed as a recombinant protein and characterized. The purified BioHx protein displayed carboxylesterase activity, and it was most active on p-nitrophenyl esters of fatty acids substrate with a short acyl chain (C4). Comparing BioHx with other known BioH proteins revealed interesting diversity in their sensitivity to ionic and nonionic detergents and organic solvents, and BioHx exhibited exceptional resistance to organic solvents, being the most tolerant one amongst all known BioH enzymes. This ascribed BioHx as a novel carboxylesterase with a strong potential in industrial applications.ConclusionsThis study constituted the first investigation of a novel bioHx gene in a biotin biosynthetic gene cluster cloned from an environmental metagenome. The bioHx gene was successfully cloned, expressed and characterized. The results demonstrated that BioHx is a novel carboxylesterase, displaying distinct biochemical properties with strong application potential in industry. Our results also provided the evidence for the effectiveness of functional metagenomic approach for identifying novel bioH genes from complex ecosystem.

Characterization of three new carboxylic ester hydrolases isolated by functional screening of a forest soil metagenomic library

Three new lipolytic genes were isolated from a forest soil metagenomic library by functional screening on tributyrin agar plates. The genes SBLip1, SBLip2 and SBLip5.1 respectively encode polypeptides of 445, 346 and 316 amino acids. Phylogenetic analyses revealed that SBLip2 and SBLip5.1 belong to bacterial esterase/lipase family IV, whereas SBLip1 shows similarity to class C β-lactamases and is thus related to esterase family VIII. The corresponding genes were overexpressed and their products purified by affinity chromatography for characterization. Analyses of substrate specificity with different p-nitrophenyl esters showed that all three enzymes have a preference for short-acyl-chain p-nitrophenyl esters, a feature of carboxylesterases as opposed to lipases. The β-lactamase activity of SBLip1, measured with the chromogenic substrate nitrocefin, was very low. The three esterases have the same optimal pH (pH 10) and remain active across a relatively broad pH range, displaying more than 60% activity between pH 6 and 10. The temperature optima determined were 35°C for SBLip1, 45°C for SBLip2 and 50°C for SBLip5.1. The three esterases displayed different levels of tolerance to salts, solvents and detergents, SBLip2 being overall more tolerant to high concentrations of solvent and SBLip5.1 less affected by detergents.

Shewanella sp. Ke75 esterase with specificity for p-nitorphenyl butyrate: Gene cloning and characterization

A bacterial strain that produces a cold-adapted esterase was isolated from tidal flats and identified as Shewanella sp. Ke75. In the present study, the corresponding gene was cloned using the shotgun method. The amino acid sequence deduced from the nucleotide sequence (957 bp) corresponded to a protein of 318 amino acid residues with a calculated molecular weight of 34875 Da. The esterase showed 68 and 57% identities with the putative esterases of Shewanella amazonensis SB2B and Colwellia psychrerythraea 34H, respectively. The esterase contained a putative leader sequence, as well as the conserved catalytic triad (Ser, His, Asp), consensus pentapeptide GXSXG, and oxyanion hole sequence (HG). The protein Ke75 was produced in both soluble and insoluble forms when Escherichia coli cells harboring the gene were cultured at 30°C. The enzyme showed specificity for C4 (butyrate) as a substrate, with little activity toward the other p-nitrophenyl esters tested. The optimum pH and temperature for enzyme activity were pH 9.0 and 30°C, respectively. Relative activity remained up to 60% even at 5°C with an activation energy of 6.29 kcal/mol, which indicated that it was a cold-adapted enzyme. Enzyme activity was enhanced in the presence of Mn2+ ions, but inhibited by Cd2+, Cu2+, Hg2+, and Zn2+ ions.

The PE16 (Rv1430) of Mycobacterium tuberculosis Is an Esterase Belonging to Serine Hydrolase Superfamily of Proteins

The PE and PPE multigene families, first discovered during the sequencing of M. tuberculosis H37Rv genome are responsible for antigenic variation and have been shown to induce increased humoral and cell mediated immune response in the host. Using the bioinformatics tools, we had earlier reported that the 225 amino acid residue PE-PPE domain (Pfam: PF08237) common to some PE and PPE proteins has a “serine α/β hydrolase” fold and conserved Ser, Asp and His catalytic triad characteristic of lipase, esterase and cutinase activities. In order to prove experimentally that PE-PPE domain is indeed a serine hydrolase, we have cloned the full-length Rv1430 and its PE-PPE domain into pET-28a vector, expressed the proteins in E. coli and purified to homogeneity. The activity assays of both purified proteins were carried out using p-nitrophenyl esters of aliphatic carboxylic acids with varying chain length (C2–C16) to study the substrate specificity. To characterize the active site of the PE-PPE domain, we mutated the Ser199 to Ala. The activity of the protein in the presence of serine protease inhibitor- PMSF and the mutant protein were measured. Our results reveal that Rv1430 and its PE-PPE domain possess esterase activity and hydrolyse short to medium chain fatty acid esters with the highest specific activity for pNPC6 at 37°C, 38°C and pH 7.0, 8.0. The details of this work and the observed results are reported in this manuscript.

Biochemical Characterisation of a Newly Isolated Low Molecular Weight Lipase from Rhizopus oryzae NRRL 3562

Lipases are one of the industrially important biocatalyst whose demand ranks third among all the other enzymes. Because of their ability to carry out diverse range of reactions, remain active even in water restricted environment and act at interfaces, they find applications in varied fields. Purification and characterization of this enzyme is essential for its application in a wide spectrum of industrial processes. The present study deals with purification of lipase from Rhizopus oryzae NRRL 3562 in minimum steps which led to a high yield and fold increase. Lipase with specific activity of 450 IU/mg gave a single band on both native and SDS PAGE, showing purification to homogeneity. It was found to be a low molecular weight lipase of 14.45 kDa and had optimum temperature range and pH of 30-40○C and 9, respectively. The purified lipase showed specificity towards long chain (C16-18) p-Nitrophenyl esters. Stability at elevated temperatures, wide pH range and in presence of solvents makes this small lipase a potent candidate for transesterification reactions.

Purification and biochemical characterization of an extracellular lipase from psychrotolerant Pseudomonas fluorescens KE38

An extracellular lipase producing bacterium was isolated from a soil sample, and identified as a strain of Pseudomonas fluorescens by 16S rRNA gene sequencing. It was named Pseudomonas fluorescens KE38. KE38 showed psychrotolerant properties with an optimum growth temperature of 25 °C. The lipase enzyme secreted by KE38 was purified 41.13-fold with an overall yield of 54.99%, and a specific activity of 337.3 U/mg. The molecular mass of purified lipase was estimated to be approximately 43 kDa by SDS-PAGE. Although the lipase was active at a temperature range of 15–65 °C, it exhibited maximum activity at 45 °C, at pH 8.0. The enzyme exhibited high stability retaining 100% and 70% of its activity after an incubation period of 45 and 100 min at 45 °C and pH 8.0 respectively. It also showed a broad substrate specificity acting on p-nitrophenyl esters with C8-C18 acyl groups as substrates and was activated by Ca2+ and Ni2+ at 1 mM. While the enzyme retained its activity levels in the presence of a variety of organic solvents, DMSO and dimethylformamide enhanced this. High stability, broad substrate specificity and activity at cold temperatures in the presence of organic solvents, and metal ions make the extracellular lipase of KE38 a candidate for industrial applications.

Alteration of substrate specificities of thermophilic α/β hydrolases through domain swapping and domain interface optimization

Protein domain swapping is an efficient way in protein functional evolution in vivo and also has been proved to be an effective strategy to modify the function of the multi-domain proteins in vitro. To explore the potentials of domain swapping for alteration of the enzyme substrate specificities and the structure-function relationship of the homologous proteins, here we constructed two chimeras from a pair of thermophilic members of the α/β hydrolase superfamily by grafting their functional domains to the conserved α/β hydrolase fold domain: a carboxylesterase from Archaeoglobus fulgidus (AFEST) and an acylpeptide hydrolase from Aeropyrum pernix K1 (apAPH) and explored their activities on hydrolyze p-nitrophenyl esters (pNP) with different acyl chain lengths. We took two approaches to reduce the crossover disruptions when creating the chimeras: chose the residue which involved in the least contacts as the splicing site and optimized the newly formed domain interfaces of the chimeras by site-directed mutations. Characterizations of AAM7 and PAR showed that these chimeras inherited the thermophilic property of both parents. In the aspect of substrate specificity, AAM7 and PAR showed highest activity towards short chain length substrate pNPC4 and middle chain length substrate pNPC8, similar to parent AFEST and apAPH, respectively. These results suggested that the substrate-binding domain is the dominant factor on enzyme substrate specificity, and the optimization of the newly formed domain interface is an important guarantee for successful domain swapping of proteins with low-sequence homology.

Dual inhibition of DNA polymerase PolC and protein tyrosine phosphatase CpsB uncovers a novel antibiotic target

Increasing antibiotic resistance is making the identification of novel antimicrobial targets critical. Recently, we discovered an inhibitor of protein tyrosine phosphatase CpsB, fascioquinol E (FQE), which unexpectedly inhibited the growth of Gram-positive pathogens. CpsB is a member of the polymerase and histidinol phosphate phosphatase (PHP) domain family. Another member of this family found in a variety of Gram-positive pathogens is DNA polymerase PolC. We purified the PHP domain from PolC (PolCPHP), and showed that this competes away FQE inhibition of CpsB phosphatase activity. Furthermore, we showed that this domain hydrolyses the 5′-p-nitrophenyl ester of thymidine-5′-monophosphate (pNP-TMP), which has been used as a measure of exonuclease activity. Finally, we showed that FQE not only inhibits the phosphatase activity of CpsB, but also ability of PolCPHP to catalyse the hydrolysis of pNP-TMP. This suggests that PolC may be the essential target of FQE, and that the PHP domain may represent an as yet untapped target for the development of novel antibiotics.

Isolation and Biochemical Characterization of Two Novel Metagenome-Derived Esterases

Environmental DNA from soil and water samples was extracted to construct a plasmid library and a fosmid library containing 19,500 and 20,400 clones, respectively. Two esterases (EstP2K and EstF4K) were finally isolated from each library based on activity screening, and both of them were characterized in this study. The esterase EstF4K consists of 396 amino acids with an SMTK motif which belongs to family VIII esterase/lipase. The amino acid sequence of EstF4K showed 83 % identity with that of EstA3, a reported esterase isolated from uncultured organisms of soil. EstP2K is composed of 224 amino acids in size and shows only 37 % identity with a putative lipase of Neisseria elongata subsp. The purified EstF4K was optimally active at pH 8.0 and 50 °C. It was remarkably active and very stable in the presence of 30 % dimethyl sulfoxide. Activity fingerprint of EstF4K displayed a higher level of activity toward short-chain fatty acid p-nitrophenyl (pNP) esters, while EstP2K preferred bias for pNP caprylate ester. The optimum reaction temperature and pH for EstP2K are 45 °C and 7.5, respectively, and the enzyme exhibited strong tolerance in the presence of 30 % methanol. EstF4K and EstP2K showed opposite enantioselectivity for methyl 3-phenylglycidate, a chiral synthon for the synthesis of Taxol® side chain.

Cloning and characterization of a thermostable carboxylesterase from inshore hot spring thermophile Geobacillus sp. ZH1

The gene (741 bp) encoding carboxylesterase from the thermophilic bacterium Geobacillus sp. ZHl was cloned and overexpressed in Escherichia coli. The purified recombinant protein presented a molecular mass of about 40 kDa by SDS-PAGE analysis. Enzyme assays using p-nitrophenyl esters with different acyl chain lengths as the substrates confirmed its esterase activity, yielding highest specific activity with p-nitrophenyl acetate. Among the p-nitrophenyl esters tested, the carboxylesterase presented preference for p-nitrophenyl caprylate, but hydrolyzed p-nitrophenyl butyrate more efficiently. When p-nitrophenyl butyrate was used as a substrate, the recombinant carboxylesterase exhibited highest activity at pH 8.0 and 60°C. Almost no decrease in esterase activity was observed at 60°C for 3 h, and over 40% of activity was still maintained after incubation at 90°C for 3 h. These results indicate that Geobacillus sp. ZH1 recombinant esterase was thermostable. The enzymatic activity was inhibited by the addition of phenylmethylsulfonyl fluoride, indicating that it contains serine residue, which plays a key role in the catalytic mechanism. Except SDS and xylene, this esterase showed stability toward other tested detergents and organic solvents. Cloning, expression, and biochemical characterization of Geobacillus sp. ZH1 carboxylesterase lay a good foundation for its structural characterization and industrial application.