Oxygen K-edge Research Articles

Strontium hexaferrite platelets: a comprehensive soft X-ray absorption and M\xf6ssbauer spectroscopy study

Platelets of strontium hexaferrite (SrFe12O19, SFO), up to several micrometers in width, and tens of nanometers thick have been synthesized by a hydrothermal method. They have been studied by a combination of structural and magnetic techniques, with emphasis on Mössbauer spectroscopy and X-ray absorption based-measurements including spectroscopy and microscopy on the iron-L edges and the oxygen-K edge, allowing us to establish the differences and similarities between our synthesized nanostructures and commercial powders. The Mössbauer spectra reveal a greater contribution of iron tetrahedral sites in platelets in comparison to pure bulk material. For reference, high-resolution absorption and dichroic spectra have also been measured both from the platelets and from pure bulk material. The O-K edge has been reproduced by density functional theory calculations. Out-of-plane domains were observed with 180° domain walls less than 20 nm width, in good agreement with micromagnetic simulations.

Coupled cluster study of the x-ray absorption spectra of formaldehyde derivatives at the oxygen, carbon, and fluorine K-edges

We have investigated the performance of a core-valence separated scheme within the coupled cluster (CC) hierarchy of methods CC singles (CCS), CC singles and approximate doubles (CC2), and CC singles and doubles (CCSD) in reproducing the K-edge x-ray absorption spectra of the low-Z elements carbon, oxygen, and fluorine in formaldehyde (CH2O), carbonyl fluoride (CF2O), formyl fluoride (CHFO), and formic acid (CHOOH). The analysis covers the entire frequency region from the first 1s → π* excitation to the core-ionization limit, encompassing the region of Rydberg transitions. Moreover, a simulation of the vibronic progressions in the 1s → π* bands of both carbon and oxygen in formaldehyde has been performed at the core-valence separated CCSD level, and the results are critically compared with highly resolved experimental data for this molecule.

Uncovering the Charge Transfer between Carbon Dots and Water by In Situ Soft X-ray Absorption Spectroscopy.

Carbon dots (CDs) exhibit outstanding physicochemical properties that render them excellent materials for various applications, often occurring in an aqueous environment, such as light harvesting and fluorescence bioimaging. Here we characterize the electronic structures of CDs and water molecules in aqueous dispersions using in situ X-ray absorption spectroscopy. Three types of CDs with different core structures (amorphous vs graphitic) and compositions (undoped vs nitrogen-doped) were investigated. Depending on the CD core structure, different ionic currents generated upon X-ray irradiation of the CD dispersions at the carbon K-edge were detected, which are interpreted in terms of different charge transfer to the surrounding solvent molecules. The hydrogen bonding networks of water molecules upon interaction with the different CDs were also probed at the oxygen K-edge. Both core graphitization and nitrogen doping were found to endow the CDs with enhanced electron transfer and hydrogen bonding capabilities with the surrounding water molecules.

Nuclear dynamics in resonant inelastic X-ray scattering and X-ray absorption of methanol.

We report on a combined theoretical and experimental study of core-excitation spectra of gas and liquid phase methanol as obtained with the use of X-ray absorption spectroscopy (XAS) and resonant inelastic X-ray scattering (RIXS). The electronic transitions are studied with computational methods that include strict and extended second-order algebraic diagrammatic construction [ADC(2) and ADC(2)-x], restricted active space second-order perturbation theory, and time-dependent density functional theory-providing a complete assignment of the near oxygen K-edge XAS. We show that multimode nuclear dynamics is of crucial importance for explaining the available experimental XAS and RIXS spectra. The multimode nuclear motion was considered in a recently developed "mixed representation" where dissociative states and highly excited vibrational modes are accurately treated with a time-dependent wave packet technique, while the remaining active vibrational modes are described using Franck-Condon amplitudes. Particular attention is paid to the polarization dependence of RIXS and the effects of the isotopic substitution on the RIXS profile in the case of dissociative core-excited states. Our approach predicts the splitting of the 2a″ RIXS peak to be due to an interplay between molecular and pseudo-atomic features arising in the course of transitions between dissociative core- and valence-excited states. The dynamical nature of the splitting of the 2a″ peak in RIXS of liquid methanol near pre-edge core excitation is shown. The theoretical results are in good agreement with our liquid phase measurements and gas phase experimental data available from the literature.

Density functional investigation of structural, electronic, optical and thermodynamic properties of Zn1−xBexO semiconductor

Based on the first principles calculations using a full potential linearized augmented plane wave (FP-LAPW) method in the modified Becke–Johnson (mBJ) approximation, we calculated the electronic, optical and thermodynamic properties of $$ {\text{Zn}}_{1 - x} {\text{Be}}_{x} {\text{O}} $$ for different Be concentrations ( $$ 0 \le x \le 1 $$ ). The calculated structure of $$ {\text{Zn}}_{1 - x} {\text{Be}}_{x} {\text{O}} $$ for $$ x = 0.25, x = 0.5\;{\text{and}}\;x = 0.75 $$ was changed compared to the end structures ( $$ x = 0\;{\text{and}}\;x = 1 $$ ) and passed from wurtzite to orthorhombic structures, while most of the previous works show that the structures of ZnO remained unchanged after doping with Be. Our result shows that the orthorhombic lattices have lower formation energies than wurtzite. The calculated band structures show an increase in energy bandgap with increasing Be concentrations and present a gap bowing close to 10 eV. The electronic structure was studied by oxygen k-edge X-ray emission (XES) and X-ray absorption (XAS). Moreover, the calculated absorption coefficient indicates that the $$ {\text{Zn}}_{1 - x} {\text{Be}}_{x} {\text{O}} $$ exhibit more interesting properties in UV region main absorption. The thermodynamic stability of these compounds has also been well studied and confirms well the previous experimental results. The calculations show that if the Be doping quantity increases, the doping system absorption spectrum blueshift becomes more significant, the energy loss peak moves towards the direction of high energy and the plasmon frequency $$ \omega_{\text{p}} $$ become stronger in the case of BeO.

Theoretical study of the absolute inner-shell photoionization cross sections of the formic acid and some of its hydrogen-bonded clusters.

Inner-shell absolute photoabsorption and photoionization cross sections of the formic acid, HCOOH, and its small hydrogen-bonded clusters, i.e., (HCOOH)2, HCOOH2 +, HCOHOH+, and HCOOH·H3O+, were calculated at the time-dependent density functional theory (TDDFT) level, and the results were used to analyze the effect of the formic acid clustering on the carbon and oxygen K-edge photoionization cross sections. The discrete electronic pseudospectra obtained with square-integrable (L2) basis set calculations were used in an analytic continuation procedure based on continued fraction functions to obtain the photoabsorption cross sections. Symmetry adapted cluster configuration interaction calculations on the small formic acid clusters have also been performed at the oxygen K-edge to assign the discrete transitions and ionization potentials in support to the TDDFT results.

Photochemical pathways in nucleobases measured with an X-ray FEL.

The conversion of light energy into other molecular energetic degrees of freedom is often dominated by ultrafast, non-adiabatic processes. Femtosecond spectroscopy with optical pulses has helped in shaping our understanding of crucial processes in molecular energy-conversion. The advent of new, ultrashort and bright X-ray free electron laser sources opens the possibility to use X-ray-typical element and site sensitivity for ultrafast molecular research. We present two types of spectroscopy, ultrafast Auger and ultrafast X-ray absorption spectroscopy, and discuss their sensitivity to molecular processes. While Auger spectroscopy is able to monitor bond distance changes in the vicinity of an X-ray created core hole, near-edge absorption spectroscopy can deliver high-fidelity information on non-adiabatic transitions involving lone-pair orbitals. We demonstrate these features on the example of the UV-excited nucleobase thymine, investigated at the oxygen K-edge. We find a C-O bond elongation in the Auger data in addition to ππ*/ nπ* non-adiabatic transition in X-ray near-edge absorption. We compare the results from both methods and draw a conclusive scenario of non-adiabatic molecular relaxation after UV excitation. This article is part of the theme issue 'Measurement of ultrafast electronic and structural dynamics with X-rays'.

Facile Microemulsion Synthesis of Vanadium-Doped ZnO Nanoparticles to Analyze the Compositional, Optical, and Electronic Properties.

In this work, microemulsion method has been followed to synthesize vanadium-doped Zn1−xVxO (with x = 0.0, 0.02, 0.04, 0.06, 0.08, and 0.10) nanoparticles. The prepared samples are characterized by several techniques to investigate the structural, morphology, electronic, functional bonding, and optical properties. X-ray diffractometer (XRD) analysis confirms the wurtzite phase of the undoped and V-doped ZnO nanoparticles. Variation in the lattice parameters ensures the incorporation of vanadium in the lattice of ZnO. Scanning electron microscopy (SEM) shows that by increasing contents of V ions, the average particle size increases gradually. X-ray Absorption Near Edge Spectroscopy (XANES) at the V L3,2 edge, oxygen K-edge, and Zn L3,2 edge reveals the presence and effect of vanadium contents in the Zn host lattice. Furthermore, the existence of chemical bonding and functional groups are also asserted by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). UV–Visible analysis shows that by increasing V+ contents, a reduction up to 2.92 eV in the energy band gap is observed, which is probably due to an increase in the free electron concentration and change in the lattice parameters.

Uncovering The Role of Oxygen in Ni-Fe(OxHy) Electrocatalysts using In situ Soft X-ray Absorption Spectroscopy during the Oxygen Evolution Reaction

In-situ X-ray absorption spectroscopy (XAS) at the oxygen K-edge was used to investigate the role of oxygen during the oxygen evolution reaction (OER) in an electrodeposited Ni-Fe(OxHy) electrocatalyst in alkaline pH. We show the rise of a pre-peak feature at 529 eV in the O K-edge spectra, correlated to the appearance of a shoulder at the Ni L3-edge and formation of oxidized Ni3+/4+-O. Then, for the first time, we track the spectral changes in a dynamic fashion in both the soft and hard X-ray regimes during cyclic voltammetry (in situ CV-XAS) to obtain a fine-tuned resolution of the potential-related changes. The pre-peak feature at the O K-edge likely signifies formation of an electron deficient oxygen site. The electrophilic oxygen species appears and disappears reversibly in correlation with the Ni2+ ↔ Ni3+/4+ process, and persists during OER catalysis as long the metal is oxidized. Our study provides new insight into OER electrocatalysis: Before onset of the O-O bond formation step, the catalytic oxyhydroxide has accumulated electron deficiencies by both, oxidation of transition metal ions and formation of partially oxidized oxygen sites.

Comparative Study on the Structural Degradation and Thermal Stability of LixNi0.5Co0.2Mn0.3O2 cathode Materials in Liquid and Solid Electrolyte Systems

Lithium-ion batteries (LIBs) using organic liquid electrolytes have been applied in portable devices such as laptops and cellular phones owing to its wide electrochemical stability, high voltages, and excellent energy density. LiNi0.5Co0.2Mn0.3O2 (NCM523) cathode have attracted significant interest as the cathode materials for LIBs owing to their high capacity, excellent rate capability and low cost. NCM523 cathode materials have a disadvantage of structural instability, which caused by the reduction of Ni ions releases oxygen from the crystal structure at the high temeprature or high charged state, which can lead thermal runaway by reacting with the flammable electrolyte. The use of organic liquid electrolytes in LIBs raises safety issues due to its flammable character and the impact on the explosion is greater in particular for relatively large systems such as electrical vehicles and grid storage. To overcome the safety issues, solid state batteries (SSBs) using a non-combustible solid state Li-ion conductor are regarded as the realistic alternative to prohibit the leakage of liquid electrolytes and the resultant fire hazards. However, due to the large resistance in the electrode-electrolyte interface, the capacity retention and cycle effieciency of the SSBs become worse. Previous studies on SSBs have been mainly focused on developing solid state electrolytes with high ion conductivity. Despite growing interest in stability, the systematic studies of safety of SSBs depending on the type of electrolyte has never been evaluated so far. It is necessary for understanding structural deformations on the cathode material in the effects of the reactions beween the electrode and various types of electrolytes, which is essential for ensuring the safety of the batteries. In this study, we investigate the structural degradation and thermal stability on NCM523 cathode materials by taking an advantage of in situ transmission electron microscopy (TEM) in various electrolyte conditions, including conventional liquid electrolyte, poly(ethylene oxide) (PEO) complexes with LiClO4 (PEO-based solid electrolyte), and PEO/LiClO4/Li1.3Al0.3Ti1.7(PO4)3 (LATP) composite electrolyte (PEO-inorganic composite electrolyte). Since the LATP oxide electrolyte has brittleness and the PEO has flexibility, it adopts a composite electrolyte having inorganic and organic phases with good interface contact with the cell electrode. A cell composed of each electrolyte was prepared and charged with cut-off voltages of 3.9 V and 4.3 V at a rate of 0.05 C after the second formation process for stabilzing the cell. The capacity at the same cut-off voltage decreases in the order of conventional liquid electrolyte, PEO-based solid electrolyte, and PEO-inorganic composite electrolytes. To understand the thermal stability and the degradation mechanism, modifications in selected-area electron diffraction (SAED) and electron energy-loss (EEL) spectra of oxygen K-edge and transition metal (Ni, Co, Mn) L-edges of each of charged NCM523 cathode materials are monitored in real time at the range from room temperature to 300°C. Our work demonstrated that contact resistance at the interface between the electrode and electrolyte is important factor. This work provides important information on the relationship with structural deformation and thermal stability of the cathode materials, which is an essential part of the rational design to develope for high engergy densities and safe SSBs. All the details will be available at the meeting. Acknowledgement This work was supported by the Korea Institute of Science and Technology (KIST) Institutional Program (Project 2E28142). This work was also supported by the National Research Foundation of Korea (NRF) grant (No. 2018R1A2B2005205).

Compensating chirp of attosecond X-ray pulses by a neutral hydrogen gas

It is demonstrated by numerical simulations that the attosecond chirp of high order harmonic pulses in the 530 to 1000 eV range can be partially compensated by the negative group delay dispersion of unionized molecular hydrogen gas. The transmission of X-rays through gas with the required pressure-length product for optimum chirp compensation is higher than 10% in the photon energy range that covers the K-edge of oxygen and L-edges of iron, cobalt, and nickel.

Decomposing electronic and lattice contributions in optical pump - X-ray probe transient inner-shell absorption spectroscopy of CuO.

Electronic and lattice contributions to picosecond time-resolved X-ray absorption spectra (trXAS) of CuO at the oxygen K-edge are analyzed by comparing trXAS spectra, recorded using excitation wavelengths of 355 nm and 532 nm, to steady-state, temperature-dependent XAS measurements. The trXAS spectra at pump-probe time-delays ≥150 ps are dominated by lattice heating effects. Insight into the temporal evolution of lattice temperature profiles on timescales up to 100s of nanoseconds after laser excitation are reported, on an absolute temperature scale, with a temporal sensitivity and a spatial selectivity on the order of 10s of picoseconds and 10s of nanometers, respectively, effectively establishing an "ultrafast thermometer". In particular, for the 532 nm experiment at ∼5 mJ cm-2 fluence, both the initial sample temperature and its dynamic evolution are well captured by a one-dimensional thermal energy deposition and diffusion model. The thermal conductivity k = (1.3 ± 0.4) W m-1 K-1 derived from this model is in good agreement with the literature value for CuO powder, kpowder = 1.013 W m-1 K-1. For 355 nm excitation, a quantitative analysis of the experiments is hampered by the large temperature gradients within the probed sample volume owing to the small UV penetration depth. The impact of the findings on mitigating or utilizing photoinduced lattice temperature changes in future X-ray free electron laser (XFEL) experiments is discussed.

Spin-lattice correlation in Eu3+ doped antiferromagnet TmFeO3.

We report the physical properties of Eu-doped bulk TmFeO3 through X-ray diffraction, magnetic susceptibility (χ), Raman scattering and X-ray absorption spectroscopy (XAS) study, which shows a similar orthorhombic structure with the Pbnm space group as TmFeO3. Magnetic measurement on Eu-doped TmFeO3 provides evidence for spin reorientations of Fe3+. Further, the Raman spectra of Eu3+ doped TmFeO3 show significant changes in Raman modes as a function of temperature, which are evidence for strong spin-lattice interaction. From the XAS spectra, the L-edge of Fe provides information on the valence state of Fe, whereas the K-edge of oxygen shows that the compound has a strong influence on the hybridization of the O(2p) state with the 3d states of Fe.

High temperature-mediated rocksalt to wurtzite phase transformation in cadmium oxide nanosheets and its theoretical evidence.

Herein, a high temperature-induced phase transformation (PT) in chemically grown CdO thin films is demonstrated, and its corresponding electronic origin further investigated by density functional theory. In particular, the cubic rocksalt to hexagonal wurtzite PT in the CdO thin film annealed at 900 °C was confirmed by X-ray diffraction (XRD), which was consistent with the high-resolution transmission electron microscopy (TEM) results. Moreover, atomic force microscopy and scanning electron microscopy clearly evidenced the morphological evolution via the formation of a nanosheet network in the wurtzite-phase CdO film. The high temperature treatment also led to a significant enhancement in the optical band gap from 2.2 to 3.2 eV, as manifested by UV-visible spectroscopy. The enhanced surface roughness of the nanosheet caused a deviation in the net dipole moment, which may break the polarizable bonds and help in reducing the average dielectric constant, resulting in a band gap opening for the transformed phase. Furthermore, X-ray absorption spectroscopy at the oxygen k-edge revealed a notable shift in the inflection point of the absorption edge, while the X-ray photoelectron spectroscopy (XPS) Cd 3d and O 1s spectra suggested a gradual reduction in the CdO2 phase with an increase in annealing temperature. In addition, different complementary techniques including Rutherford backscattering and Raman spectroscopy were exploited to understand the aforementioned PT and its structural correlation. Finally, molecular dynamics simulation together with density functional theory calculation suggested that the symmetry modification at the Brillouin zone boundary provides a succinct signature for the PT in the CdO thin film.

Nanoencapsulation of arsenate with nanoscale zero-valent iron (nZVI): A 3D perspective

The principal forces driving the efficient enrichment and encapsulation of arsenic (As) into nanoscale zero-valent iron (nZVI) are the disordered arrangement of the atoms and the gradient chemical potentials within the core-shell interface. The chemical compositions and the fine structure of nZVI are characterized with a combination of spherical aberration corrected scanning transmission electron microscopy (Cs-STEM), X-ray energy-dispersive spectroscopy (XEDS), electron energy loss spectroscopy (EELS), and high-resolution X-ray photoelectron spectroscopy (HR-XPS). Atomically resolved EELS at the oxygen K-edge unfolds that the Fe species in nZVI are well stratified from Fe(III) oxides in the outermost periphery to a mixed Fe(III)/Fe(II) interlayer, then Fe(II) oxide and the pure Fe(0) phase. Reactions between As(V) and nZVI suggest that a well-structured local redox gradient exists within the shell layer, which serves as a thermodynamically favorable conduit for electron transfer from the iron core to the surface-bound As(V). HR-XPS with ion sputtering shows that arsenic species shift from As(V), As(III)/As(V) to As(V)/As(III)/As(0) from the iron oxide shell–water interface to the Fe(0) core. Results reinforce previous work on the efficacy of nZVI for removing and remediating arsenic while the analytical TEM methods are also applicable to the study of environmental interfaces and surface chemistry.

Effect of electrolyte composition on rock salt surface degradation in NMC cathodes during high-voltage potentiostatic holds

Surface degradation of lithium-ion cathodes at high voltages represents a significant barrier to increasing the useable energy of conventional cathodes. Though much work has been focused on mitigating the detrimental effects of such phenomena, the complex and correlated mechanisms involved have made progress difficult. Herein, the effect of electrolyte identity on surface degradation is examined. LiNi0.5Mn0.3Co0.2O2 (NMC532)/Li4Ti5O12 (LTO) full cells were constructed using three different electrolytes: a baseline organic carbonate electrolyte, a baseline organic carbonate electrolyte with an oxidizable additive, and a fluorinated carbonate electrolyte. Each system was subjected to a 60 h potentiostatic hold at 3.05 V (4.6 V vs. Li+/Li) and subsequently deconstructed for characterization via transmission electron microscopy (TEM) and electron energy loss spectroscopy (EELS). Molecular simulations were carried out on each distinct component of the three electrolytes in contact with crystal surfaces of an NMC532 particle. Results indicate an affinity for the additive-containing electrolyte to extract atomic oxygen from the cathode surface, whereas the fluorinated electrolyte components have negligible interactions. Hydrogen abstraction from the baseline electrolyte is facilitated by the NMC532 surface. TEM analysis of cathode surfaces, after the potentiostatic holds, revealed that the NMC532 particles cycled with the additive-containing electrolyte underwent significant surface degradation, including changes to local crystal structure in a region penetrating 20–40 nm from the surface; consistent with oxygen and lithium loss from the cathode material. However, the NMC532 in contact with the fluorinated electrolyte showed a disordered layer of just a few nm in thickness, similar to the depth of crystal disorder observed in pristine NMC532 primary particles. EELS data of the oxygen K-edge also indicated transition metal (TM) reduction, consistent with oxygen loss and changes in crystal structure extending into the cathode surface for each of the electrolytes surveyed. These surface reactions, including oxygen loss, are shown to correlate well with elevated oxidation currents and surface reconstructions of cathode particles.

Coupled Cluster and Time-Dependent Density Functional Theory Description of Inner Shell Photoabsorption Cross Sections of Molecules.

Near K-edge photoabsorption cross section spectra of a number of molecules, namely, water, ammonia, acetone, acetaldehyde, furan, and pyrrole, were obtained at the nitrogen, oxygen, and carbon K-edges with the Coupled Cluster ansatz (CC) and with the Time-Dependent Density Functional Theory (TDDFT) by treating the inner shell excitations as individual channels, separated from the valence part of the spectrum. The discretized electronic pseudospectrum, obtained with quadratically integrable basis sets ( a.k.a. L2) at the CC or TDDFT level, is used to reconstruct the complex dipole polarizability function, from which the photoabsorption cross section near the K-edge is obtained by a continued fraction based analytic continuation procedure. The CC2 and CCSD results are in good agreement with experimental data, while the TDDFT results yield reliable cross sections. Overall, the results obtained in this work indicate that our method can be used for the treatment of the NEXAFS spectra, with the advantage that the electronic excitations in the K-edges can be easily obtained at low computational cost using TDDFT.

Data-driven approach for the prediction and interpretation of core-electron loss spectroscopy

Spectroscopy is indispensable for determining atomic configurations, chemical bondings, and vibrational behaviours, which are crucial information for materials development. Despite their importance, the interpretation of spectra using “human-driven” methods, such as the manual comparison of experimental spectra with reference/simulated spectra, is difficult due to the explosive increase in the number of experimental spectra to be observed. To overcome the limitations of the “human-driven” approach, we develop a new “data-driven” approach based on machine learning techniques by combining the layer clustering and decision tree methods. The proposed method is applied to the 46 oxygen-K edges of the ELNES/XANES spectra of oxide compounds. With this method, the spectra can be interpreted in accordance with the material information. Furthermore, we demonstrate that our method can predict spectral features from the material information. Our approach has the potential to provide information about a material that cannot be determined manually as well as predict a plausible spectrum from the geometric information alone.

Self-channelled high harmonic generation of water window soft x-rays

Owing to the increasing significance of high harmonic generation (HHG) as a tabletop coherent x-ray source and the coming of age of intense infrared (IR) lasers, the development of high brightness soft x-ray beamlines is gaining a lot of attention. We discuss the self-guided propagation of high energy IR pulses around 1.8 μm centre wavelength being loosely focused into a long, high-pressure gas cell. A bright x-ray beam with photon energies extending up to the oxygen K-edge at 543 eV is achieved with a flux of 2.9 × 103 photons/shot/1% bandwidth around the carbon K-edge (280 eV). We provide experimental and numerical evidence of an ionization steady state condition in the generation medium causing self-channelling and intensity clamping of the driving field. While the later limits the HHG cut-off energy for a given driving field wavelength, self-channelling increases the HHG flux through a longer, phase-matched, interaction length and provides a well-collimated HHG beam covering more than three octaves from <50 to 550 eV.

Toward a Rapid-Fabricated Triboelectric Device with a 1,3-Phosphorylated Poly(vinyl alcohol) Polymer for Water Turbulence Energy Harvesting.

Electricity generation from coal, nuclear reaction, and shale gas has brought environmental, safety, and health concerns. The electricity industry is constantly seeking sustainable, safe, and healthy way of electricity generation. The use of triboelectric device is promising for producing electricity from water energy. In this study, we report on the rapid fabrication of a 1,3-phosphorylated poly(vinyl alcohol) gel-based triboelectric device and direct harvesting of water turbulence energy using this device. The gel was prepared by the reaction of poly(vinyl alcohol) with dipotassium phosphate. The synthesized gel was characterized by mass spectroscopy, thermogravimetric analysis/difference thermogravimetry, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscope, Raman, and carbon and oxygen K-edges soft X-ray absorption near edge structure spectroscopy. The triboelectric device was used to harvest electricity from water turbulence.