Oxygen Coordination Research Articles

Modulating Local Oxygen Coordination to Achieve Highly Reversible Anionic Redox and Negligible Voltage Decay in O2‐Type Layered Cathodes for Li‐Ion Batteries

AbstractO2‐type layered oxides have emerged as promising cathode materials for high‐energy lithium‐ion batteries, offering a solution to mitigate voltage decay through reversible transition metal (TM) migration between TM and Li layers during cycling. However, achieving a fully reversible oxygen redox remains a significant challenge. Here, this is addressed by introducing Li─O─Li configurations in the layered structure of Li0.85□0.15[Li0.08□0.04Ni0.22Mn0.66]O2 (O2‐LLNMO), where □ represents vacancies. This adjustment alters the redox‐active oxygen environment and increases the energy gap between the O 2p nonbonding and TM─O antibonding bands. As a result, the contribution of lattice oxygen to capacity is significantly enhanced, improving the reversibility of oxygen redox processes. The O2‐LLNMO cathode demonstrates minimal voltage decay (0.13 mV per cycle) and excellent cycling stability, retaining 95.8% of its capacity after 100 cycles. A novel strategy is presented to design high‐performance layered oxides with stable anionic redox activity, advancing the development of next‐generation lithium‐ion batteries.

Synthesis, Spectroscopy and Biological Studies of Copper and Silver Complexes Derived from 2-Substituted Amino Propanoic Acid

Synthesis of copper and silver complexes were prepared from novel Schiff base ligand. These synthesized ligand and their metal complexes were characterized by elemental analysis, FT-IR, 1H NMR, UV-Vis and Mass spectrometry. The coordination of amino nitrogen, phenolic oxygen, and carboxylato oxygen atoms is shown by the infrared spectra.The Schiff bases and its complexes were screened for their in vitro antibacterial and antifungal studies against the bacteria Pseudomonas Aeruginosa (PA, Gram -ve), Bacillus Cirroflagellosus (BC, Gram +ve), Penicillium Notatium (PN) and Aspergillus Niger (AN) strains. The results of the antibacterial investigation show that the copper and silver complexes possess more potent bactericide and fungicide properties than the ligand.

Constructing Targeted Strong Nb4d-O2p-Li2s Configurations to Obtain Excellent Energy Density and Long Life for Li-Rich Cathodes.

The Li-rich Mn-based cathode materials (LMRs) deliver excellent energy density and exhibit low cost, which are considered as the most promising cathode materials for the next generation lithium-ion batteries. However, the irreversible redox reaction of the oxygen atoms directly leads to release oxygen and intensifies phase transformation. Besides, the local stress and strain will be generated due to the unit-cell volume difference between R-3m and C2/m phases, which continuously aggravates the collapse of secondary particles. Herein, the strong Nb4d-O2p-Li2s configurations at the Li1 sites of the TM-layer in the C2/m phase and secondary particles with the radial arrangement of refined primary particles are designed to inhibit oxygen release and relieve lattice stress by Nb2O5 treatment. Meanwhile, the preferential growth of the active {010} planes is presented to obtain an excellent transmission rate of Li+. As a result, the designed LMR delivers remarkable electrochemical properties with high discharge capacity and initial coulomb efficiency of 276 mAh g-1 and 85 % at 0.1 C, outstanding cycling retention rate of 81 % after 300 cycles. This novel crystal structure combining oxygen coordination regulation and micro-nano scale design provides inspiration for the design of high-performance LMRs.

Constructing Targeted Strong Nb4d−O2p−Li2s Configurations to Obtain Excellent Energy Density and Long Life for Li‐Rich Cathodes

AbstractThe Li‐rich Mn‐based cathode materials (LMRs) deliver excellent energy density and exhibit low cost, which are considered as the most promising cathode materials for the next generation lithium‐ion batteries. However, the irreversible redox reaction of the oxygen atoms directly leads to release oxygen and intensifies phase transformation. Besides, the local stress and strain will be generated due to the unit‐cell volume difference between R‐3m and C2/m phases, which continuously aggravates the collapse of secondary particles. Herein, the strong Nb4d−O2p−Li2s configurations at the Li1 sites of the TM‐layer in the C2/m phase and secondary particles with the radial arrangement of refined primary particles are designed to inhibit oxygen release and relieve lattice stress by Nb2O5 treatment. Meanwhile, the preferential growth of the active {010} planes is presented to obtain an excellent transmission rate of Li+. As a result, the designed LMR delivers remarkable electrochemical properties with high discharge capacity and initial coulomb efficiency of 276 mAh g−1 and 85 % at 0.1 C, outstanding cycling retention rate of 81 % after 300 cycles. This novel crystal structure combining oxygen coordination regulation and micro‐nano scale design provides inspiration for the design of high‐performance LMRs.

Structural and optical properties of Ce-stabilized tetragonal phase and intense blue emission of monoclinic phase in ZrO2 nanoparticles

Structural and optical properties of Ce-stabilized tetragonal zirconium dioxide (ZrO2) and intense blue emission of monoclinic ZrO2 are presented in this paper. Nanoparticles of ZrO2 in the stabilized tetragonal and monoclinic phases have been prepared by the solution combustion method. X-ray diffraction studies and Rietveld refinement of the diffraction pattern show the stabilization of ZrO2 in the tetragonal phase (t-ZrO2) with Ce doping. It is the host-dopant ionic size mismatch that leads to lattice distortion and hence the t-ZrO2 stabilized phase. Raman modes confirm the phase transformation from the monoclinic to a tetragonal phase of ZrO2. The presence of oxygen vacancies and surface states in the samples play a role in altering the optical band gap. The dopant Ce-ions create defects/oxygen vacancies, which act as the trapping sites for electrons and holes/the donor and vacancy-related impurity levels. It is transition between these levels or between delocalized conduction bands that lead to band gap reduction. Photoluminescence studies reveal the presence of structural phase transformation dependent emission bands. The monoclinic phase (m-ZrO2) exhibits an intense blue emission originating from the asymmetric and unusual oxygen coordination of Zr in the m-ZrO2. The chromaticity coordinates indicate that the prepared material and adopted strategies are suitable in the field of optoelectronic application.

Synergistic effects enabled efficient photocatalytic removal of ofloxacin antibiotic in wastewater by layered double hydroxides loaded lignin-derived carbon fibers

The environmental problems caused by the abuse of antibiotics are raising serious attention, and the removal of antibiotics in wastewater is meaningful yet challenging. In this work, lignin-derived carbon fibers loaded layered double hydroxides (LDH@LCF) has been prepared for the removal of ofloxacin (OFX) from wastewater via photocatalysis, which exhibit a high degradation efficiency of 96 % under visible light and maintained 90 % after five reuses. The effects of Zn2+/Fe3+ in the samples and other parameters affecting the photocatalytic efficiency of OFX have been systematically investigated. Results demonstrated that the enhanced photocatalytic efficiency is derived from the synergistic effect of the Zn2+ and Fe3+ in the LDH with a reduced band gap of the catalyst, higher number of oxygen and metal unsaturated coordination sites, and rapid removal of photogenerated electrons. The working mechanism and degradation pathways for OFX by LDH@LCF are also elucidated in detail.

Enriched Oxygen Coverage Localized within Ir Atomic Grids for Enhanced Oxygen Evolution Electrocatalysis.

Inefficient active site utilization of oxygen evolution reaction (OER) catalysts have limited the energy efficiency of proton exchange membrane (PEM) water electrolysis. Here, an atomic grid structure is demonstrated composed of high-density Ir sites (≈10atoms per nm2) on reactive MnO2-x support which mediates oxygen coverage-enhanced OER process. Experimental characterizations verify the low-valent Mn species with decreased oxygen coordination in MnO2-x exert a pivotal impact in the enriched oxygen coverage on the surface during OER process, and the distributed Ir atomic grids, where highly electrophilic Ir─O(II-δ)- bonds proceed rapidly, render intense nucleophilic attack of oxygen radicals. Thereby, this metal-support cooperation achieves ultra-low overpotentials of 166mV at 10mA cm-2 and 283mV at 500mA cm-2, together with a striking mass activity which is 380 times higher than commercial IrO2 at 1.53V. Moreover, its high OER performance also markedly surpasses the commercial Ir black catalyst in PEM electrolyzers with long-term stability.

Efficient pathways for photogenerated charge transfer induced by Co dopants in WO3/TiO2 nanorod arrays

Modifying the energy band structure in heterostructured photocatalysts enhances charge separation efficiency and improves photoelectrochemical (PEC) performance by decreasing the charge transfer barrier. In this study, cobalt doping into WO3/TiO2 core/shell heterojunction nanorod arrays introduces versatile valence states of cobalt altering the oxygen coordination environment around W atoms in WO3, resulting in an increase in W5+ ions and oxygen vacancy defects in WO3 lattice, facilitating the water splitting reaction. Photogenerated electrons transfer easily from the WO3:Co shell to the TiO2 core due to the lower conduction band minimum (CBM) of WO3:Co shell. Moreover, photogenerated holes transfer from the TiO2 core to the WO3:Co shell efficiently due to the higher valence band maximum (VBM) of TiO2 core. The heterostructure has a high photogenerated carrier density (9.89 × 1018 cm-3), improving photoconversion efficiency (2.55 mA cm-2 at 1.23 V vs. RHE) and reducing charge recombination rates (6.51 × 10–4 s-1). Co doping increases the -OH bond on WO3/TiO2 surface, improves its hydrophilicity, and is more conducive to the reaction in aqueous electrolyte. Additionally, the nanorod array structure facilitates PEC reaction kinetics by providing open spaces for mass exchange. This work proposes a feasible strategy for improving photogenerated charge transport and enhancing PEC by combining regulation of the band structure of WO3/TiO2 heterostructures with morphology design.

Spin asymmetry of O 2p –related states in SrTiO3(001)

Atomically clean SrTiO3(001) is characterized by low energy electron diffraction, core level and valence band photoelectron spectroscopy, the latter also with spin resolution. Samples prepared by a sputtering-annealing procedure exhibited in-gap states in the valence band spectra, Ti3+ components in Ti 2p core level spectra and a noticeable spin asymmetry in the 3–9 eV binding energy range, which corresponds to valence states of mainly O 2p character. Upon annealing in oxygen, the spin asymmetry vanishes, accompanied by the intensity decrease of the contribution of titanium low ionization states and of in-gap states, indicating that these three phenomena are mutually connected. The observed spin asymmetry may be generated by indirect exchange mediated by the in-gap states between O 2p orbitals, or by the partial Ti 3d character of these states, which acquire non-zero spin in case of incomplete oxygen coordination.

Design of Point Charge Models for Divalent Metal Cations Targeting Quantum Mechanical Ion–Water Dimer Interactions

Divalent metal cations are of vital importance in biochemistry and materials science, and their structural and thermodynamic properties in aqueous solution have often been used as targets for the development of ion models. This study presented a strategy for designing nonbonded point charge models of divalent metal cations (Mg2+ and Ca2+) and Cl− by targeting quantum mechanics (QM)-based ion–water dimer interactions. The designed models offered an accurate representation of ion–water interactions in the gas phase and showed reasonable performance for non-targeted properties in aqueous solutions, such as the ion–water oxygen distance (IOD), coordination number (CN), and density and viscosity of MgCl2 and CaCl2 solutions at low concentrations. Our metal cation models yielded considerable overestimates of the hydration free energies (HFEs) of the ions, whereas the Cl− model displayed good performance. Together with the overestimated density and viscosity of the salt solutions, these results indicated the necessity of re-optimizing ion–ion interactions and/or including polarization effects in the design of ion models. The designed Mg2+ model was capable of maintaining the crystal metal-binding networks during MD simulation of a metalloprotein, indicating great potential for biomolecular simulations. This work highlighted the potential of QM-based ion models to advance the study of metal ion interactions in biological and material systems.

Monitoring the formation of infinite-layer transition metal oxides through in situ atomic-resolution electron microscopy.

Infinite-layer transition metal oxides with two-dimensional oxygen coordination exhibit intriguing electronic and magnetic properties due to strong in-plane orbital hybridization. The synthesis of this distinctive structure has primarily relied on kinetically controlled reduction of oxygen-rich phases featuring three-dimensional polyhedral oxygen coordination. Here, using in situ atomic-resolution electron microscopy, we scrutinize the intricate atomic-scale mechanisms of oxygen conduction leading to the transformation of SrFeO2.5 to infinite-layer SrFeO2. The oxygen release is highly anisotropic and governed by the lattice reorientation aligning the fast diffusion channels towards the outlet, which is facilitated by cooperative yet shuffle displacements of iron and oxygen ions. Accompanied with the oxygen release, the three-dimensional to two-dimensional reconfiguration of oxygen is facilitated by the lattice flexibility of FeOx polyhedral layers, adopting multiple discrete transient states following the sequence determined by the least energy-costing pathways. Similar transformation mechanism may operate in cuprate and nickelate superconductors, which are isostructural with SrFeO2.

Axial coordination engineering of atomic Co–N4 sites for exceptional aromatic nitroreduction

Optimizing the local environment of metal active centers bonded by nitrogen ligands (M−N4) through additional axial coordination provides a promising approach to enhance the reaction kinetics of heterogeneous catalysis. However, achieving precise targeting and construction of efficient active sites remains a major challenge. In this study, under the guidance of density functional theory (DFT) calculations, we precisely position and engineer atomic Co–N4 active sites with axial O coordination on porous carbon nanosheets (Co1/NOC) for boosted aromatic nitroreduction through a novel template-anchoring strategy. The resulting Co1/NOC catalyst exhibited unprecedented catalytic activities towards a series of functionalized nitroaromatics with a record overall turnover frequency (TOF) of 38022 h−1 under mild reaction conditions, 7.6- and 38 times higher than that of Co–N4 sites (Co1/NC) and commercial Pd/C catalysts, respectively, standing ahead of the reported catalysts. Targeted DFT calculations reveal that axial oxygen coordination efficiently promotes the electronic delocalization of the Co center, which dramatically facilitates the formation and utilization of reactive H* species, enhances the selective adsorption of nitroaromatics, and accelerates the conversion of aromatic nitroreduction, eventually attaining exceptional catalytic performance. This work offers a new avenue for precisely tailoring the coordination environment of single-atom catalysts to achieve advanced catalytic performance in chemical transformations.

Metal–Organic Frameworks with Axial Cobalt–Oxygen Coordination Modulate Polysulfide Redox for Lithium–Sulfur Batteries

AbstractAlthough the ultrahigh theoretical energy density and cost‐effectiveness, lithium–sulfur (Li‐S) batteries suffer from sluggish conversion kinetics and the shuttling effect of soluble lithium polysulfides (LiPSs). Herein, conductive hexagonal cobalt‐organic framework (Co‐HTP) nanosheets are anchored in situ on carboxyl graphene (CG) substrates and serve as host catalysts to modulate the polysulfide redox. Substantial characterizations identify that the local coordination environment of the quadrilateral Co–N4 units transforms into an asymmetric penta‐coordinated O–Co–N4 with axial Co─O coordination, which triggers spin polarization and remarkable electron delocalization of Co 3d orbital. The higher spin state and lower local electron density of the O–Co–N4 sites induce more active electronic states in Co‐HTP/CG and facilitate orbital hybridization with polysulfides to form more stable bond orders. Such optimized electronic structure significantly accelerates redox kinetics and enhances the adsorption strength of polysulfides. These merit the lithium–sulfur battery based on Co‐HTP/CG with a high reversible capacity, impressive rate capability, and prolonged cycling performance over 500 cycles. This work will enrich the design philosophy of modulating the spintronic structure of electrocatalysts for advanced Li–S batteries and beyond.

Amino polycarboxylic acid complex agent modified Fe0 enhanced activation of H2O2 double decomposition pathways for tetracycline removal under neutral condition

The summary of this study explores the modification of Fe0 with amino polycarboxylic acid complex agents (APCAs) to enhance H2O2 catalysis for tetracycline (TC) removal under neutral conditions. The ethylenediaminetetraacetic acid-modified Fe0/H2O2 system (EDTA-Fe0/H2O2) achieved a removal efficiency of 90.2 % for 50 mg/L TC, significantly higher than the 23.9 % efficiency of the traditional Fe0/H2O2 system. The removal rate of various pollutants by the EDTA- Fe0/H2O2 process is 2.9 to 8.4 times higher than that of the Fe0/H2O2 process. After four cycles of use, the removal rate of TC by the EDTA-Fe0/H2O2 system can still reach 76.3 %. Additionally, the effect of treating TC in natural freshwater can also achieve 80.1 %. Characterization revealed that EDTA-Fe0 had a larger Fe(II) proportion, better hydrophobicity, and lower corrosion potential than Fe0, indicating higher activity. Quenching experiments and electron paramagnetic resonance tests confirmed that •OH was the major reactive species. Shell-isolated nanoparticle-enhanced Raman spectroscopy indicated the presence of *OOH species, suggesting the involvement of a dioxygen coordination reaction. Density functional theory calculations showed that both dioxygen and single oxygen coordination H2O2 decomposition pathways played significant roles, and EDTA-Fe0 exhibited high catalysis ability for H2O2 in both pathways. Analysis of the relationship between APCAs’ group structure and APCAs-Fe0 properties indicated that the number of carboxyl groups was crucial for enhancing catalytic activity, while the number of amino groups also impacted antibiotic removal efficiency. Overall, this study provides a solid theoretical foundation for further Fe0 applications and suggests a new method to improve TC removal.

O-arylation reaction over lanthanide metal–organic framework: Synthesis, structure and catalytic reaction

Two novel lanthanide based two-dimensional metal-organic framework (MOF) compounds [Tb(NDC)(NO3)(DMA)2]n (MOF-1) and [Ho(NDC)(NO3)(DMA)2]n (MOF-2) [H2NDC=2,6-naphthalenedicarboxylic acid and DMA=N,N-dimethylacetamide] have been synthesized following solvothermal route and structurally characterized. Structural analysis reveals that both the compounds are crystallized in the orthorhombic crystal system with space group Pbca. MOFs feature a “paddle-wheel” (PW) type core building units which are constructed via carboxylato oxygen coordination with lanthanide atoms. 2D lanthanide based MOFs consist of paddle-wheel building block are rare in the literature. MOF-1 and MOF-2 possess an octa-coordinated metal center. Apart from carboxylato groups, oxygen atoms of DMA and NO3− ions are also coordinated to metal centers. Paddle-wheel cores are interconnected to each other to give rise to layered network structure in both the cases. 2D layers are propagated parallel to bc plane and layers are stacked one upon another along the crystallographic a axis. Notably, both MOF-1 and MOF-2 are capable to catalyze O-arylation reaction efficiently under heterogeneous medium. However, amongst them, catalytic efficacy of MOF-1 towards O-arylation reaction is found to be better than that of MOF-2.

Catalytic enantioselective intramolecular hydroamination of alkenes using chiral aprotic cyclic urea ligand on manganese (II)

Asymmetric catalysis for enantioselective intramolecular hydroamination of alkenes is a critical method in the construction of enantioenriched nitrogen-containing rings, often prevalent in biologically active compounds and natural products. Herein, we demonstrate a facile enantioselective intramolecular hydroamination of alkenes for the synthesis of chiral pyrrolidine, piperidine, and indoline moieties, using a manganese (II) chiral aprotic cyclic urea catalyst. The cyclic ligand hinders the inversion of the N atom of the urea and effectively discriminate between the enantiomers of substrates. High-resolution mass spectrometry, deuterium labeling experiments, and molecular orbital energy analysis clearly reveal the intermediates and mechanism of the transformation. As a key step, oxygen coordination by chiral aprotic urea presents a robust control over the asymmetric intra-HA reaction through the involvement of a convergent assembly of two vital intermediates (Mn-N and C-Mn-Br), providing access to chiral cyclic amine systems in high yields with excellent enantioselectivity.

Atomic-Layer IrOx Enabling Ligand Effect Boosts Water Oxidation Electrocatalysis.

An in situ formed IrOx (x ≤ 2) layer driven by anodic bias serves as the essential active site of Ir-based materials for oxygen evolution reaction (OER) electrocatalysis. Once being confined to atomic thickness, such an IrOx layer possesses both a favorable ligand effect and maximized active Ir sites with a lower O-coordination number. However, limited by a poor understanding of surface reconstruction dynamics, obtaining atomic layers of IrOx remains experimentally challenging. Herein, we report an idea of material design using intermetallic IrVMn nanoparticles to induce in situ formation of an ultrathin IrOx layer (O-IrVMn/IrOx) to enable the ligand effect for achieving superior OER electrocatalysis. Theoretical calculations predict that a strong electronic interaction originating from an orderly atomic arrangement can effectively hamper the excessive leaching of transition metals, minimizing vacancies for oxygen coordination. Linear X-ray absorption near edge spectra analysis, extended X-ray absorption fine structure fitting outcomes, and X-ray photoelectron spectroscopy collectively confirm that Ir is present in lower oxidation states in O-IrVMn/IrOx due to the presence of unsaturated O-coordination. Consequently, the O-IrVMn/IrOx delivers excellent acidic OER performances with an overpotential of only 279 mV at 10 mA cm-2 and a high mass activity of 2.3 A mg-1 at 1.53 V (vs RHE), exceeding most Ir-based catalysts reported. Moreover, O-IrVMn/IrOx also showed excellent catalytic stability with only 0.05 at. % Ir dissolution under electrochemical oxidation, much lower than that of disordered D-IrVMn/IrOx (0.20 at. %). Density functional theory calculations unravel that the intensified ligand effect optimizes the adsorption energies of multiple intermediates involved in the OER and stabilizes the as-formed catalytic IrOx layer.

Introducing the Bis(mesitoyl)phosphide Ligand into Dinuclear Trivalent Rare Earth Metal Coordination Chemistry.

Anionic ancillary ligands play a critical role in the construction of rare earth (RE) metal complexes due to the large influence on the stability of the molecule and engendering emergent electronic properties that are of interest in a plethora of applications. Supporting ligands comprising oxygen donor atoms are highly pursued in RE chemistry owing to the high oxophilicity innate to these ions. The scarcely employed bis(acyl)phosphide (BAP) ligands feature oxygen coordination sites and contain a phosphide backbone rendering it attractive for RE-coordination chemistry. Here, we integrate bis(mesitoyl)phosphide (mesBAP) as an ancillary ligand into REIII chemistry to generate the first dinuclear trivalent RE complexes containing BAP ligands; [{mesBAP}2RE(THF)(μ-Cl)]2 (RE=Y, (1), Gd (2), and Dy (3); THF=tetrahydrofuran). Each RE center is ligated to two monoanionic mesBAP ligands, one THF molecule and one chloride ion. All three molecules were characterized through single-crystal X-ray diffraction, 31P NMR, IR and UV-Vis spectroscopy. 31P, 1H and 13C NMR on the diamagnetic yttrium congener 1 confirm asymmetric ligand coordination. DFT calculations conducted on 2 provided insight into the electronic structure. The magnetic properties of 2 and 3 were investigated via SQUID magnetometry. The GdIII ions exhibit weak antiferromagnetic coupling, corroborated by DFT results.

Yttria substitution effect of tantalate aluminosilicate glasses with ultra‐high Young's modulus

AbstractWe report novel oxide glasses that are compatible with ultra‐high Young's modulus (∼150 GPa) and a small coefficient of thermal expansion (∼5.0 ppm/K). These glasses were prepared using a conventional melt‐quenching technique. The viscosity–temperature relation provides the reshaping temperature for the stiff and less dilated oxide glasses. The origin of the ultra‐high Young's modulus is the inclusion of Y2O3 as well as five‐ and six‐coordinated alumina oxide and Ta2O5, which has a large ionic packing ratio due to higher oxygen coordination numbers. On the other hand, the small thermal expansion coefficient originates from including Ta2O5 and SiO2 with large dissociation energy due to strong bonds.

Robustness of the pyrochlore structure in rare-earth A2Ir2O7 iridates and pressure-induced structural transformation in IrO2

A comprehensive study of the structural properties of the heavily investigated rare-earth A2Ir2O7 iridate series under extreme conditions is presented. From Pr2Ir2O7 to Lu2Ir2O7, the series is sufficiently covered by iridates with A = Pr, Sm, Dy, Ho, Er, Tm, Yb, and Lu; general trends and systematics within the series, including the understudied heavy-rare-earth members, are dependably followed. Temperature- and pressure-dependent synchrotron X-ray powder diffraction experiments reveal robustness of the pyrochlore structure throughout the series, down to 4 K and up to 20 GPa. The thermal expansivity of the pyrochlore lattice is determined, all falling in the Debye temperature range of θD = 360–420 K. The pressure compressibility shows a systematic increase of the bulk modulus with the rare-earth atomic number from K = 180–210 GPa. Combining the results of thermal measurements (Debye temperature) and pressure measurements (bulk modulus) enables us to determine the Grüneisen parameter of selected members and compare it to previous studies. Temperature and pressure evolution of the fractional coordinate of oxygen at 48f Wyckoff position, the sole free fractional coordinate in the crystal structure, is investigated and discussed regarding the antiferromagnetic ordering of the Ir magnetic moments. In addition to results on A2Ir2O7 iridates, the temperature and pressure evolution of the crystal structure of an IrO2 minority phase is followed. The tetragonal rutile-type structure is stable down to the lowest temperature. However, an application of pressure of approximately 15 GPa induces a structural transition: The tetragonal structure is orthorhombically distorted. The orthorhombic structure is still not fully stabilised at 20 GPa, and further distortion of the lattice (or subsequent structural transformations) is expected with increasing external pressure.