Osteoblastic Cells Research Articles

Fabrication of gradient hydrogels using a thermophoretic approach in microfluidics

The extracellular matrix presents spatially varying physical cues that can influence cell behavior in many processes. Physical gradients within hydrogels that mimic the heterogenous mechanical microenvironment are useful to study the impact of these cues on cellular responses. Therefore, simple and reliable techniques to create such gradient hydrogels are highly desirable. This work demonstrates the fabrication of stiffness gradient Gellan gum (GG) hydrogels by applying a temperature gradient across a microchannel containing hydrogel precursor solution. Thermophoretic migration of components within the precursor solution generates a concentration gradient that mirrors the temperature gradient profile, which translates into mechanical gradients upon crosslinking. Using this technique, GG hydrogels with stiffness gradients ranging from 20 to 90 kPa over 600 µm are created, covering the elastic moduli typical of moderately hard to hard tissues. MC3T3 osteoblast cells are then cultured on these gradient substrates, which exhibit preferential migration and enhanced osteogenic potential toward the stiffest region on the gradient. Overall, the thermophoretic approach provides a non-toxic and effective method to create hydrogels with defined mechanical gradients at the micron scale suitable for in vitro biological studies and potentially tissue engineering applications.

Effect of Occupational Stress on Periodontitis According to the Salivary RANKL Level Among Iraqi Employees.

Findings show that periodontitis does not affect all populations; similarly, some individuals present risk conditions such as occupational stress, making them more susceptible to developing periodontitis through unhealthy habits like poor oral hygiene and immune suppression. Periodontitis triggers an inflammatory host immune response; "Receptor Activator Nuclear Factor KB ligand (RANKL)" is the primary regulator of osteoclast differentiation and activity. It was found that osteoclastic bone damage caused by periodontitis depends on the RANKL produced by osteoblastic and periodontal ligament cells. This study aimed to assess the effect of occupational stress on employees with periodontitis using salivary RANKL marker. A case-control analysis was done at my clinic with 90 male employees aged 30-50. The participants completed self-administered questionnaires and had periodontal exams. Employee occupational stress was estimated using a life events scale questionnaire. Calibrated dentists performed the parameters used in the periodontal assessment after collecting whole unstimulated salivary samples from each employee to measure salivary RANKL using ELISA technique. The present finding revealed a statistically significant difference among groups in "probing pocket depth, plaque index, bleeding on probing, clinical attachment level, and salivary RANKL level". They were higher in the stressed employees' group, which is not statistically significant. The findings of this investigation observed that occupational stress increased clinical periodontal parameters and salivary RANKL of periodontitis in employees.

PMMA bone cement with L-arginine/nano fish bone nanocomplex for apatite formation.

Bone cement is one of the materials used in orthopaedics that serves various functions, such as binding bone implants, replacing damaged bones and filling spaces within bones. Various materials have been used to synthesize bone cement, and one promising material for further research is fish bone waste-based bone cement. This study investigates the potential of fish bone waste-based bone cement by incorporating nano fish bone (NFB) and L-arginine (L-Arg) protein into polymethyl methacrylate (PMMA) to examine apatite growth. NFB derived from the Salmo salar fish positively influences osteoblast cell proliferation and differentiation, while L-Arg enhances biocompatibility and antibiotic properties. The NFB/L-Arg combination holds promise in accelerating new bone formation and cell growth, both of which are crucial for fracture healing and bone remodelling. Tensile strength tests reveal the superior performance of BC-PMMA-1-NFB/L-Arg (36.11 MPa) compared with commercial PMMA (32 MPa). Immersion tests with simulated body fluid (SBF) solution for 7 days reveal accelerated apatite layer formation, emphasizing the potential benefits of NFB/L-Arg in bone cement applications.

Evaluation of the Effects of Whey Protein and Moringa Oleifera Leaves Extract Mixture on Osseointegration in Rabbits.

Osteogenic, antioxidant and anti-inflammatory effects of Whey protein and M. oleifera gel prompted us to evaluate their role alone or in combination on osseointegration in rabbits. In this study, 24 titanium implants were inserted in the femurs of six rabbits. One implant was placed without treatment, and another one was coated with a mixture of whey protein and M. oleifera gel for each side. The animals were divided into two groups of 2- and 6-week intervals and evaluated using histopathological and immunohistochemical techniques. Histological evaluation revealed a significant difference between the experimental and the control groups after two weeks in osteoblast and osteocyte counts. The experimental group had mature bone development after six weeks of implantation, while the control group had a woven bone. Immunohistochemical results showed that the experimental group, compared to the control group, exhibited early positive expression of osteoblast cells at two weeks after the experiment. Based on histopathological observations, the experimental group showed a tiny area of collagenous fiber in 6th week after the implantation. A mixture of whey protein and M. oleifera could accelerate osseointegration and healing processes.

A Porous Fluoride-Substituted Bovine-Derived Hydroxyapatite Scaffold Constructed for Applications in Bone Tissue Regeneration.

Hydroxyapatite is widely used in bone implantation because of its similar mineral composition to natural bone, allowing it to serve as a biocompatible osteoconductive support. A bovine-derived hydroxyapatite (BHA) scaffold was developed through an array of defatting and deproteinization procedures. The BHA scaffold was substituted with fluoride ions using a modified sol-gel method to produce a bovine-derived fluorapatite (BFA) scaffold. Fourier-transform infrared spectroscopy and X-ray diffraction analysis showed that fluoride ions were successfully substituted into the BHA lattice. According to energy dispersive X-ray analysis, the main inorganic phases contained calcium and phosphorus with a fluoride ratio of ~1-2 wt%. Scanning electron microscopy presented a natural microporous architecture for the BFA scaffold with pore sizes ranging from ~200-600 μm. The BHA scaffold was chemically stable and showed sustained degradation in simulated-body fluid. Young's modulus and yield strength were superior in the BFA scaffold to BHA. In vitro cell culture studies showed that the BFA was biocompatible, supporting the proliferative growth of Saos-2 osteoblast cells and exhibiting osteoinductive features. This unique technique of producing hydroxyapatite from bovine bone with the intent of producing high performance biomedically targeted materials could be used to improve bone repair.

Vertical Ridge Augmentation with Customized Titanium Mesh Using a 3D-Printing Model: A Prospective Study in Humans.

To evaluate the usefulness of ridge augmentation using a customized titanium mesh (CTM) that was preformed by trimming and bending the commercial titanium mesh on a virtually reconstructed 3D acrylic resin model using clinical, radiologic, histologic, and histomorphometric analyses. This study was designed prospectively for patients who required vertical ridge augmentation using a staged approach before implant surgery. After installation of the CTM, grafting was performed using deproteinized porcine bone mineral covered with an absorbable membrane. Computed tomography was performed preoperatively and 6 months after simultaneous/staged guided bone regeneration to measure planned, reconstructed, and lacking bone volume, and the reconstruction rate was calculated based on these values. Clinical complications were also recorded, particularly the mesh exposure rate. At re-entry, the bone core was obtained using a trephine bur, and histologic and histomorphometric analyses were performed. A total of 10 sites in eight patients were used for the study analysis. The mean planned bone volume was 1.15 cm3 (range: 0.78 to 1.56 cm3), mean lacking bone volume was 0.13 cm3 (range: 0 to 0.59 cm3), and mean reconstructed bone volume was 1.02 cm3 (range: 0.56 to 1.43 cm3). The exposure rate was 30% (3 out of 10 sites). The reconstruction rate was over 80%, except for one case that showed suppuration. From histomorphometric analysis, 27.52% ± 16.87% of new bone, 7.62% ± 5.19% of residual graft, and 64.86% ± 23.76% of connective tissue were observed. The core biopsy samples demonstrated different pseudoperiosteum layer appearances based on the healing stage of the augmented sites. In the premature bone, the inner osteogenic layer consisted of multiple layers of osteoblast cells with adjacent large blood vessels. However, in the mature augmented site, there was no specific inner osteogenic layer, and the outer fibrous layer was dominant. The fabrication of CTM based on the application of the 3D-printing technique makes vertical ridge augmentation easier and can reduce complications and achieve target bone acquisition. In addition, it is expected that quantitative analysis of the pseudoperiosteum layer will be facilitated using the CTM.

PTH and the Regulation of Mesenchymal Cells within the Bone Marrow Niche.

Parathyroid hormone (PTH) plays a pivotal role in maintaining calcium homeostasis, largely by modulating bone remodeling processes. Its effects on bone are notably dependent on the duration and frequency of exposure. Specifically, PTH can initiate both bone formation and resorption, with the outcome being influenced by the manner of PTH administration: continuous or intermittent. In continuous administration, PTH tends to promote bone resorption, possibly by regulating certain genes within bone cells. Conversely, intermittent exposure generally favors bone formation, possibly through transient gene activation. PTH's role extends to various aspects of bone cell activity. It directly influences skeletal stem cells, osteoblastic lineage cells, osteocytes, and T cells, playing a critical role in bone generation. Simultaneously, it indirectly affects osteoclast precursor cells and osteoclasts, and has a direct impact on T cells, contributing to its role in bone resorption. Despite these insights, the intricate mechanisms through which PTH acts within the bone marrow niche are not entirely understood. This article reviews the dual roles of PTH-catabolic and anabolic-on bone cells, highlighting the cellular and molecular pathways involved in these processes. The complex interplay of these factors in bone remodeling underscores the need for further investigation to fully comprehend PTH's multifaceted influence on bone health.

Influence of core-shell polydopamine-barium titanate doping on the osseointegration and cytotoxicity of the polypyrrole coatings applied by ECD on Nitinol orthopedic implants

In the current study, a thin polydopamine (PDA) layer of around 5 nm was created on the barium titanate (BT) nanoparticles through self-polymerization of dopamine. The produced modified PDA/BT core-shell nanoparticles, termed PBT, were co-electrodeposited with polypyrrole (PPy) onto Nitinol (NiTi) alloy substrates in concentrations ranging from 1 to 10% by weight to produce PPy/PBT composite coatings. The incorporation of these particles changed PPy's cauliflower morphology into a rougher but more compact nodular morphology. According to the atomic force microscopy results, the average surface roughness of PPy coating increased from 44.2 nm up to 80.2 nm by the co-deposition of PBT. Aside from variations in morphology and roughness values, all of the PPy and PPy/PBT coatings demonstrated hydrophilicity. Nonetheless, while the majority of the composite coatings had higher water contact angle (WCA) than the unreinforced PPy, the PPy/10PBT composite coating had the lowest WCA of all samples, measuring 56.9°. The piezoelectric responses of the coatings were also examined, and the best specimen was the PPy/5PBT composite coating with an enhanced output voltage of approximately 400 mV. Finally, MC3T3 mouse osteoblast cells were used for in vitro cell culture evaluations. While healthy cells were evenly distributed on the surface of all coatings after 3 days, indicating biocompatibility, cell density on composite coatings was higher than on unreinforced PPy coating. According to the MTT experiment, the vitality of MC3T3 osteoblast cells on the surface of PPy/5PBT composite coating was more than 30% greater than that on the surface of PPy coating.

The p53-mediated cell cycle regulation is a potential mechanism for emodin-suppressing osteosarcoma cells

BackgroundAs the most common primary bone cancer, the therapy of osteosarcoma requires further study. An anthraquinone derivative, emodin, has been found to have anticancer potential. We proposed that emodin suppresses osteosarcoma by cell cycle regulation mediated by p53. MethodsThis study determined the effect of emodin on viability and apoptosis of 6 osteosarcoma cell lines (p53 null cells MG63, G292, and A-673; p53 mutated cells HOS and SK-PN-DW; p53 expressing cells U2OS and 2 osteoblast cell lines), then knockdown p53 in U2OS, and observed the impacts of emodin on p53, p21, cyclin proteins, and cell cycle. ResultsHigh dose emodin (40–160 μM) induced cell death and apoptosis of all the cell lines; medium dose emodin (20 μM) preferentially inhibited osteosarcoma cells; low dose emodin (1–10 μM) preferentially inhibited p53 expressing osteosarcoma cells. Emodin dose-dependently inhibited p53 and p21 in U2OS. Emodin at 10 μM decreased the expression of Cdk2, E2F, and Cdk1; and increased RB but had no effects on cyclin E and cyclin B. The knockdown of p53 almost eliminated all the impacts of 10 μM emodin on cell cycle proteins. ConclusionsEmodin suppresses U2OS by p53-mediated cell cycle regulation.

Abaloparatide promotes bone repair of vertebral defects in ovariectomized rats by increasing bone formation

Osteoporotic vertebral fracture (OVF) is the most common type of osteoporotic fracture and is associated with immobility and mortality. Bone anabolic agents, such as abaloparatide (ABL), are usually administered to patients with OVF to prevent subsequent fractures. Although several studies have shown that bone anabolic agents promote healing of long bone fractures, there is little evidence of their healing effect on vertebral bone fractures. In the present study, we investigated the effect of ABL on vertebral bone defects using ovariectomized (OVX) rats with vertebral body drill-hole defects, an animal model of OVF. Eight-week-old female Sprague-Dawley rats were subjected to OVX, followed by the 32–36 days of bone depletion period, once-daily subcutaneous ABL was administered to OVX rats at a dose of 30 μg/kg for a maximum of 6 weeks from the day of the vertebral defect surgery. We found that ABL significantly increased bone mineral content and improved trabecular structural parameters at the vertebral defect site. Moreover, ABL significantly increased bone strength of the defected vertebrae. Bone histochemical analysis revealed formation of thick trabecular bone networks at the defect site after ABL administration, consistent with an improvement in trabecular structural parameters by ABL. ABL increased ALPase- and PHOSPHO1-positive osteoblastic cells and ALPase/PCNA double-positive cells, indicating enhanced preosteoblast proliferation as well as bone formation at the defect site. On the other hand, ABL did not affect the number of cathepsin K-positive osteoclasts per bone surface, suggesting that ABL did not promote excessive bone resorption. Our findings suggest that ABL is useful not only for preventing secondary vertebral fractures but also for promoting bone healing in OVF.

Vitamin D3 Release from MgO Doped 3D Printed TCP Scaffolds for Bone Regeneration.

Regenerating bone tissue in critical-sized craniofacial bone defects remains challenging and requires the implementation of innovative bone implants with early stage osteogenesis and blood vessel formation. Vitamin D3 is incorporated into MgO-doped 3D-printed scaffolds for defect-specific and patient-specific implants in low load-bearing areas. This novel bone implant also promotes early stage osteogenesis and blood vessel development. Our results show that vitamin D3-loaded MgO-doped 3D-printed scaffolds enhance osteoblast cell proliferation 1.3-fold after being cultured for 7 days. Coculture studies on osteoblasts derived from human mesenchymal stem cells (hMSCs) and osteoclasts derived from monocytes show the upregulation of genes related to osteoblastogenesis and the downregulation of RANK-L, which is essential for osteoclastogenesis. Release of vitamin D3 also inhibits osteoclast differentiation by 1.9-fold after a 21-day culture. After 6 weeks, vitamin D3 release from MgO-doped 3D-printed scaffolds enhances the new bone formation, mineralization, and angiogenic potential. The multifunctional 3D-printed scaffolds can improve early stage osteogenesis and blood vessel formation in craniofacial bone defects.

Manzamine-A Alters In Vitro Calvarial Osteoclast Function.

Manzamine-A is a marine-derived alkaloid that has demonstrated antimalarial and antiproliferative properties and is an emerging drug lead compound as a possible intervention in certain cancers. This compound has been found to modulate SIX1 gene expression, a target that is critical for the proliferation and survival of cells via various developmental pathways. As yet, little research has focused on manzamine-A and how its use may affect tissue systems including bone. Here we hypothesized that manzamine-A, through its interaction with SIX1, would alter precursor cells that give rise to the bone cell responsible for remodeling: the osteoclast. We further hypothesized reduced effects in differentiated osteoclasts, as these cells are generally not mitotic. We interrogated the effects of manzamine-A on preosteoclasts and osteoclasts. qrtPCR, MTS cell viability, Caspase 3/7, and TRAP staining were used as a functional assay. Preosteoclasts show responsiveness to manzamine-A treatment exhibited by decreases in cell viability and an increase in apoptosis. Osteoclasts also proved to be affected by manzamine-A but only at higher concentrations where apoptosis was increased and activation was reduced. In summary, our presented results suggest manzamine-A may have significant effects on bone development and health through multiple cell targets, previously shown in the osteoblast cell lineage, the cell responsible for mineralized tissue formation, and here in the osteoclast, the cell responsible for the removal of mineralized tissue and renewal via precipitation of bone remodeling.

In Vitro Biocompatibility Assessment of a Novel Membrane Containing Magnesium-Chitosan/Carboxymethyl Cellulose and Alginate Intended for Bone Tissue Regeneration.

Bone tissue engineering (BTE) is an emerging interdisciplinary field that aims to develop new strategies and materials for repairing, regenerating, or replacing damaged bone tissues. This field combines engineering, biology, and medicine principles to create functional bone tissues in the laboratory and in vivo. The main goal of BTE is to create biological substitutes that mimic the structure, function, and properties of natural bone tissue, thereby promoting the regeneration of bone defects caused by trauma, disease, or aging. In this study, we developed a biocomposite membrane using magnesium-chitosan, carboxymethyl cellulose, and alginate through a simple cast drying method. The biocompatibility of the membrane was evaluated using human osteoblastic cells, and it was found to be nontoxic to these cells. Both metabolic activity measurements (24 and 48 hours) and the lactate dehydrogenase release assay (72 hours) indicated that the membrane was biocompatible and did not exert significant toxic effects. These results suggest that the developed biocomposite membrane has the potential to be used as a safe and effective biomaterial for various biomedical applications, such as BTE, wound healing, and drug delivery. Further studies are warranted to explore the full potential of this membrane and its performance in different biological environments.

Viability Test of Hydroxyapatite Tooth Graft on Osteoblast cell culture

Surgery is required to restore bone loss brought on by regenerative periodontal diseases while retaining the patient's aesthetics. The bone deficits caused by periodontal disease have been repaired using a variety of transplant materials. One of the graft materials used is dentin since it resembles bone in terms of both organic and inorganic components. In order to evaluate the viability of dental grafts, this study intended to count the osteoblast cells that were still alive after a specific therapy. Osteoblast cell cultures in 42 well plates were employed in this work. The 42 well plate cell cultures were separated into seven groups for 24hour examinations and seven groups for 48 hour examinations in order to examine the cells using the MTT assay. Each group contained control cells, control media devoid of cells, and the treatment group, which received tooth transplant at doses of 8, 4, 2, 1, and 0.5mg/mL. Using an ELISA reader with a 595nm wavelength, the optical density of these cells was used to determine the viability of the cells. There are more than 50% of osteoblast cells in all concentrations, which is indicated by the number of these cells. The Shapiro-Wilk, Levene, and Oneway Anova tests were performed to assess the normality, uniformity, and degree of group differences in the data. This study demonstrates the biocompatibility of the tooth graft and the osteoblast cells.

Loss of chaperone-mediated autophagy does not alter age-related bone loss in male mice.

Chaperone-mediated autophagy (CMA) is a lysosome-dependent degradation pathway that eliminates proteins that are damaged, partially unfolded, or targeted for selective proteome remodeling. CMA contributes to several cellular processes, including stress response and proteostasis. Age-associated increase in cellular stressors and decrease in CMA contribute to pathologies associated with aging in various tissues. CMA contributes to bone homeostasis in young mice. An age-associated reduction in CMA was reported in osteoblast lineage cells; however, whether declining CMA contributes to skeletal aging is unknown. Herein we show that cellular stressors stimulate CMA in UAMS-32 osteoblastic cells. Moreover, the knockdown of an essential component of the CMA pathway, LAMP2A, sensitizes osteoblasts to cell death caused by DNA damage, ER stress, and oxidative stress. As elevations in these stressors are thought to contribute to age-related bone loss, we hypothesized that declining CMA contributes to the age-associated decline in bone formation by sensitizing osteoblast lineage cells to elevated stressors. To test this, we aged male CMA-deficient mice and controls up to 24 months of age and examined age-associated changes in bone mass and architecture. We showed that lack of CMA did not alter age-associated decline in bone mineral density as measured by dual x-ray absorptiometry (DXA). Moreover, microCT analysis performed at 24 months of age showed that vertebral cancellous bone volume, cortical thickness, and porosity of CMA-deficient and control mice were similar. Taken together, these results suggest that reduction of CMA does not contribute to age-related bone loss.

Scallop mantle-derived exosomes promote osteoblast formation and alleviate osteoporosis in mice

Osteoporosis, the most prevalent metabolic bone disease, has emerged as a serious public health concern. Safe and effective therapeutic interventions for osteoporosis are urgently needed. Here, we demonstrated that scallop mantle-derived exosomes (SMEs) promoted osteogenesis and prevented osteoporosis in ovariectomy-induced osteoporotic mice. Specifically, we successfully isolated SMEs with typical exosome morphology and desirable particle size. SMEs were found to contain abundant functional lipids, metabolites, and osteogenic-related proteins. Cell experiments revealed that SMEs could be internalized by osteoblastic MC3T3-E1 cells and promoted the proliferation, differentiation, and mineralization of MC3T3-E1 cells. In addition, SMEs survived the hostile gastrointestinal conditions and accumulated in the bone of mice after oral administration. Further mice investigations demonstrated that orally administered SMEs efficiently alleviated the bone loss, and improved the bone microstructure and biochemical properties in an ovariectomy-induced osteoporosis mouse model. Overall, these results reveal the osteogenesis effect of dietary SMEs, suggesting the potential of SMEs as an alternative or adjunct therapeutic agent in preventing or ameliorating osteoporosis.

Advanced Bioresin Formulation for 3D-Printed Bone Scaffolds: PCLDMA and p-PLA Integration.

In bone tissue engineering, scaffold attributes such as pore dimensions and mechanical strength are crucial. This study synthesized polycaprolactone dimethacrylate (PCLDMA) from polycaprolactone (PCL), incorporating epichlorohydrin (Epi-PCL) and methacryloyl chloride (Meth-Cl). PCLDMA was blended with polylactic acid (p-PLA) to 3D-print bone scaffolds using stereolithography (SLA). Analytical techniques included nuclear magnetic resonance (NMR), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and compression testing. Degradation kinetics and cell viability were investigated using human osteoblast (HOB) cells. Findings revealed PCLDMA/p-PLA composite scaffold superiority over the original polymers. Notably, PCLDMA-60 (60% PCLDMA, 40% p-PLA) displayed optimal properties. Compressive strength varied from 0.019 to 16.185 MPa, porosity from 2% to 50%, and degradation rates from 0% to 0.4% over three days. Cell viability assays affirmed biocompatibility across various PCLDMA ratios. In conclusion, PCLDMA/p-PLA composite scaffolds, particularly PCLDMA-60, show great potential in bone tissue engineering.

Characterization of hFOB 1.19 Cell Line for Studying Zn-Based Degradable Metallic Biomaterials.

In vitro testing is the first important step in the development of new biomaterials. The human fetal osteoblast cell line hFOB 1.19 is a very promising cell model; however, there are vast discrepancies in cultivation protocols, especially in the cultivation temperature and the presence of the selection reagent, geneticin (G418). We intended to use hFOB 1.19 for the testing of Zn-based degradable metallic materials. However, the sensitivity of hFOB 1.19 to zinc ions has not yet been studied. Therefore, we compared the toxicity of zinc towards hFOB 1.19 under different conditions and compared it with that of the L929 mouse fibroblast cell line. We also tested the cytotoxicity of three types of Zn-based biomaterials in two types of media. The presence of G418 used as a selection reagent decreased the sensitivity of hFOB 1.19 to Zn2+. hFOB 1.19 cell line was more sensitive to Zn2+ at elevated (restrictive) temperatures. hFOB 1.19 cell line was less sensitive to Zn2+ than L929 cell line (both as ZnCl2 and extracts of alloys). Therefore, the appropriate cultivation conditions of hFOB 1.19 during biomaterial testing should be chosen with caution.

Surface Functionalization of Titanium-Based Implants with a Nanohydroxyapatite Layer and Its Impact on Osteoblasts: A Systematic Review.

This study aims to evaluate the influence of a nanohydroxyapatite layer applied to the surface of titanium or titanium alloy implants on the intricate process of osseointegration and its effect on osteoblast cell lines, compared to uncoated implants. Additionally, the investigation scrutinizes various modifications of the coating and their consequential effects on bone and cell line biocompatibility. On the specific date of November 2023, an exhaustive electronic search was conducted in esteemed databases such as PubMed, Web of Science, and Scopus, utilizing the meticulously chosen keywords ((titanium) AND ((osteoblasts) and hydroxyapatite)). Methodologically, the systematic review meticulously adhered to the PRISMA protocol. Initially, a total of 1739 studies underwent scrutiny, with the elimination of 741 duplicate records. A further 972 articles were excluded on account of their incongruence with the predefined subjects. The ultimate compilation embraced 26 studies, with a predominant focus on the effects of nanohydroxyapatite coating in isolation. However, a subset of nine papers delved into the nuanced realm of its modifiers, encompassing materials such as chitosan, collagen, silver particles, or gelatine. Across many of the selected studies, the application of nanohydroxyapatite coating exhibited a proclivity to enhance the osseointegration process. The modifications thereof showcased a positive influence on cell lines, manifesting in increased cellular spread or the attenuation of bacterial activity. In clinical applications, this augmentation potentially translates into heightened implant stability, thereby amplifying the overall procedural success rate. This, in turn, renders nanohydroxyapatite-coated implants a viable and potentially advantageous option in clinical scenarios where non-modified implants may not suffice.

Cell-Material Interplay in Focal Adhesion Points.

The complex interplay between cells and materials is a key focus of this research, aiming to develop optimal scaffolds for regenerative medicine. The need for tissue regeneration underscores understanding cellular behavior on scaffolds, especially cell adhesion to polymer fibers forming focal adhesions. Key proteins, paxillin and vinculin, regulate cell signaling, migration, and mechanotransduction in response to the extracellular environment. This study utilizes advanced microscopy, specifically the AiryScan technique, along with advanced image analysis employing the Density-Based Spatial Clustering of Applications with Noise (DBSCAN) cluster algorithm, to investigate protein distribution during osteoblast cell adhesion to polymer fibers and glass substrates. During cell attachment to both glass and polymer fibers, a noticeable shift in the local maxima of paxillin and vinculin signals is observed at the adhesion sites. The focal adhesion sites on polymer fibers are smaller and elliptical but exhibit higher protein density than on the typical glass surface. The characteristics of focal adhesions, influenced by paxillin and vinculin, such as size and density, can potentially reflect the strength and stability of cell adhesion. Efficient adhesion correlates with well-organized, larger focal adhesions characterized by increased accumulation of paxillin and vinculin. These findings offer promising implications for enhancing scaffold design, evaluating adhesion to various substrates, and refining cellular interactions in biomedical applications.