Cellulose Orientation Research Articles

Downregulating aspen xylan biosynthetic GT43 genes in developing wood stimulates growth via reprograming of the transcriptome.

Xylan is one of the main compounds determining wood properties in hardwood species. The xylan backbone is thought to be synthesized by a synthase complex comprising two members of the GT43 family. We downregulated all GT43 genes in hybrid aspen (Populus tremula×tremuloides) to understand their involvement in xylan biosynthesis. All three clades of the GT43 family were targeted for downregulation using RNA interference individually or in different combinations, either constitutively or specifically in developing wood. Simultaneous downregulation in developing wood of the B (IRX9) and C (IRX14) clades resulted in reduced xylan Xyl content relative to reducing end sequence, supporting their role in xylan backbone biosynthesis. This was accompanied by a higher lignocellulose saccharification efficiency. Unexpectedly, GT43 suppression in developing wood led to an overall growth stimulation, xylem cell wall thinning and a shift in cellulose orientation. Transcriptome profiling of these transgenic lines indicated that cell cycling was stimulated and secondary wall biosynthesis was repressed. We suggest that the reduced xylan elongation is sensed by the cell wall integrity surveying mechanism in developing wood. Our results show that wood-specific suppression of xylan-biosynthetic GT43 genes activates signaling responses, leading to increased growth and improved lignocellulose saccharification.

Structure/Function Analysis of Cotton-Based Peptide-Cellulose Conjugates: Spatiotemporal/Kinetic Assessment of Protease Aerogels Compared to Nanocrystalline and Paper Cellulose

Nanocellulose has high specific surface area, hydration properties, and ease of derivatization to prepare protease sensors. A Human Neutrophil Elastase sensor designed with a nanocellulose aerogel transducer surface derived from cotton is compared with cotton filter paper, and nanocrystalline cellulose versions of the sensor. X-ray crystallography was employed along with Michaelis–Menten enzyme kinetics, and circular dichroism to contrast the structure/function relations of the peptide-cellulose conjugate conformation to enzyme/substrate binding and turnover rates. The nanocellulosic aerogel was found to have a cellulose II structure. The spatiotemporal relation of crystallite surface to peptide-cellulose conformation is discussed in light of observed enzyme kinetics. A higher substrate binding affinity (Km) of elastase was observed with the nanocellulose aerogel and nanocrystalline peptide-cellulose conjugates than with the solution-based elastase substrate. An increased Km observed for the nanocellulosic aerogel sensor yields a higher enzyme efficiency (kcat/Km), attributable to binding of the serine protease to the negatively charged cellulose surface. The effect of crystallite size and β-turn peptide conformation are related to the peptide-cellulose kinetics. Models demonstrating the orientation of cellulose to peptide O6-hydroxymethyl rotamers of the conjugates at the surface of the cellulose crystal suggest the relative accessibility of the peptide-cellulose conjugates for enzyme active site binding.

Effects of mechanical stretching on average orientation of cellulose and pectin in onion epidermis cell wall: A polarized FT-IR study

The organization of polysaccharides in plant cell walls is important for the mechanics of plant cells. Spectral analysis of cell walls by polarized IR can reveal polysaccharide organization, but may be complicated by dipoles not aligned with the backbone. For instance, analysis of uniaxially-aligned cellulose Iβ film revealed that the dipole transition vector of the 1160 cm−1 band involving stretch vibrations of glycosidic C1–O–C4 linkages is approximately at 30° with respect to the backbone of the cellulose chain, because of coupling with C5–O–C1 bonds in the six-membered rings. In the case of homogalacturonan, the dipole transition vector of the ester carbonyl group vibration (νC=O, 1745 cm−1) is expected to be nearly normal to the homogalacturonan backbone. Using this information and the dichroism equation, the change in net orientation of cell wall polymers upon mechanical stretch was determined by polarized IR analysis. Never-dried abaxial outer epidermal cell walls of the second scale of onion bulb were mechanically stretched along longitudinal or transverse directions with respect to the long axis of the cells and then dried while under mechanical stretch. The average orientations of both 1160 and 1745 cm−1 vibration transition dipoles were rotated by ~5° and ~4°, respectively, along the stretch direction from their initial random distributions upon longitudinal strain by 14%; and by ~4° and ~3°, respectively, upon transverse strain by 12%. These results imply that both cellulose microfibrils and pectins in the cell wall are passively realigned along the stretch direction by external mechanical force. The analytical methodology developed here will be useful to study how cell wall polymers might reorganize during cell wall growth and development.

Cellulose structure and lignin distribution in normal and compression wood of the Maidenhair tree (Ginkgo biloba L.).

We studied in detail the mean microfibril angle and the width of cellulose crystals from the pith to the bark of a 15-year-old Maidenhair tree (Ginkgo biloba L.). The orientation of cellulose microfibrils with respect to the cell axis and the width and length of cellulose crystallites were determined using X-ray diffraction. Raman microscopy was used to compare the lignin distribution in the cell wall of normal/opposite and compression wood, which was found near the pith. Ginkgo biloba showed a relatively large mean microfibril angle, varying between 19° and 39° in the S2 layer, and the average width of cellulose crystallites was 3.1-3.2 nm. Mild compression wood without any intercellular spaces or helical cavities was observed near the pith. Slit-like bordered pit openings and a heavily lignified S2L layer confirmed the presence of compression wood. Ginkgo biloba showed typical features present in the juvenile wood of conifers. The microfibril angle remained large over the 14 annual rings. The entire stem disc, with a diameter of 18 cm, was considered to consist of juvenile wood. The properties of juvenile and compression wood as well as the cellulose orientation and crystalline width indicate that the wood formation of G. biloba is similar to that of modern conifers.

Enhanced cellulose orientation analysis in complex model plant tissues

The orientation distribution of cellulose microfibrils in the plant cell wall is a key parameter for understanding anisotropic plant growth and mechanical behavior. However, precisely visualizing cellulose orientation in the plant cell wall has ever been a challenge due to the small size of the cellulose microfibrils and the complex network of polymers in the plant cell wall. X-ray diffraction is one of the most frequently used methods for analyzing cellulose orientation in single cells and plant tissues, but the interpretation of the diffraction images is complex. Traditionally, circular or square cells and Gaussian orientation of the cellulose microfibrils have been assumed to elucidate cellulose orientation from the diffraction images. However, the complex tissue structures of common model plant systems such as Arabidopsis or aspen (Populus) require a more sophisticated approach. We present an evaluation procedure which takes into account the precise cell geometry and is able to deal with complex microfibril orientation distributions. The evaluation procedure reveals the entire orientation distribution of the cellulose microfibrils, reflecting different orientations within the multi-layered cell wall. By analyzing aspen wood and Arabidopsis stems we demonstrate the versatility of this method and show that simplifying assumptions on geometry and orientation distributions can lead to errors in the calculated microfibril orientation pattern. The simulation routine is intended to be used as a valuable tool for nanostructural analysis of plant cell walls and is freely available from the authors on request.

Visualization of the nanoscale pattern of recently-deposited cellulose microfibrils and matrix materials in never-dried primary walls of the onion epidermis

For more than 10 years epidermal cell layers from onion scales have been used as a model system to study the relationship between cellulose orientation, cell growth and tissue mechanics. To bring such analyses to the nanoscale, we have developed a procedure for preparing epidermal peels of onion scales for atomic force microscopy to visualize the inner surface (closest to the plasma membrane) of the outer epidermal wall, with minimal disturbance and under conditions very close to the native state of the cell wall. The oriented, multilayer distribution of cellulose microfibrils, approximately ~3 nm wide, is readily observed over extended lengths, along with other features such as the distribution of matrix substances between and on top of microfibrils. The microfibril orientation and alignment appear more dispersed in younger scales compared with older scales, consistent with reported values for mechanical and growth anisotropy of whole epidermal sheets. These results open the door to future work to relate cell wall structure at the nm scale with larger-scale tissue properties such as growth and mechanical behaviors and the action of cell wall loosening agents to induce creep of primary cell walls.

The molecular structure within dislocations in Cannabis sativa fibres studied by polarised Raman microspectroscopy

Polarised Raman micrsospectroscopy was employed to study the molecular structure within dislocations (slip planes) in the cell walls of Hemp fibre cells (Cannabis sativa (L.)). It was found that the cellulose microfibrils within dislocations have a different orientation than in the surrounding cell wall, and that the cellulose in the transition zones between a large dislocation and the surrounding wall may have yet another orientation. Furthermore, cellulose orientation seemed to be less uniform within dislocations than in the surrounding cell wall.

Super-resolution imaging with Pontamine Fast Scarlet 4BS enables direct visualization of cellulose orientation and cell connection architecture in onion epidermis cells

BackgroundIn plants, a complex cell wall protects cells and defines their shape. Cellulose fibrils form a multilayered network inside the cell-wall matrix that plays a direct role in controlling cell expansion. Resolving the structure of this network will allow us to comprehend the relationship of cellulose fibril orientation and growth.The fluorescent dye Pontamine Fast Scarlet 4BS (PFS) was shown to stain cellulose with high specificity and could be used to visualize cellulose bundles in cell walls of Arabidopsis root epidermal cells with confocal microscopy. The resolution limit of confocal microscopy of some 200 nm in xy and 550 nm in z for green light, restricts the direct visualization of cellulose to relatively large bundles, whereas the structure of cellulose microfibrils with their diameter below 10 nm remains unresolved. Over the last decade, several so-called super-resolution microscopy approaches have been developed; in this paper we explore the potential of such approaches for the direct visualization of cellulose.ResultsTo ensure optimal imaging we determined the spectral properties of PFS-stained tissue. PFS was found not to affect cell viability in the onion bulb scale epidermis. We present the first super-resolution images of cellulose bundles in the plant cell wall produced by direct stochastic optical reconstruction microscopy (dSTORM) in combination with total internal reflection fluorescence (TIRF) microscopy. Since TIRF limits observation to the cell surface, we tested as alternatives 3D-structured illumination microscopy (3D-SIM) and confocal microscopy, combined with image deconvolution. Both methods offer lower resolution than STORM, but enable 3D imaging. While 3D-SIM produced strong artifacts, deconvolution gave good results. The resolution was improved over conventional confocal microscopy and the approach could be used to demonstrate differences in fibril orientation in different layers of the cell wall as well as particular cellulose fortifications around plasmodesmata.ConclusionsSuper-resolution light microscopy of PFS-stained cellulose fibrils is possible and the increased resolution over conventional approaches makes it a valuable tool for the investigation of the cell-wall structure. This is one step in method developments that will close the gap to more invasive techniques, such as atomic force and electron microscopy.

Polysaccharide Monoxygenases: Giving a Boost to Biofuel Production

In this issue of Structure, Li etal. present high resolution crystal structures of two fungal polysaccharide monoxygenases. Unexpectedly, they observe oxygen species bound at the active sites that inform on the chemistry that can be supported by these enzymes. Additionally, the organization of aromatic amino acids and glycosylation on the carbohydrate binding surfaces suggests that regiospecificity and cellulose orientation can be predicted.

The Study on Excavated Bast Fibers Using Synchrotron Polarized FT-IR Micro-Spectroscopy

The scientific identification of excavated bast fibers (mainly hemp and ramie) is one of the important procedures for the conservation of textile cultural properties. In this paper, the new procedure to distinguish the kind of excavated bast fibers was proposed. Though excavated bast fibers are usually degraded by the long-term preservative environment, it was confirmed that they show still dichroism in infrared spectroscopy.Since the allowed amount of sampling for scientific analysis is severely limited in archaeology or in cultural properties, the authors used polarized synchrotron FT-IR Micro-spectroscopy. All of the bast fibers showed peaks at 1160, 1110, 1060, 670, 620 and 560cm-1 . The corresponding modern reference bast fibers also show similar dichroism in polarized FT-IR Micro-spectroscopy. Though SEM images of excavated bast fibers indicate the degraded appearance, the results of polarized FT-IR spectrum show that a part of the molecular orientation of cellulose and hemicelluloses are still remained in fiber structure. The authors are continuing the research for the identification of excavated bast fibers using polarized FT-IR Micro-spectroscopy.

Structural organisation of the wood polymers in the wood fibre structure

The organization of the major polymers in the wood fiber has a large impact on the properties of the structure. Numerous studies have been devoted to the cellulose microfibril arrangement, providing the longitudinal strength of the fiber, while less is known regarding the structural organization of other components, such as hemicelluloses and lignin. For the hemicelluloses, as being part of the cellulose aggregation process, indications of a strong coupling to the cellulose structure have been shown. For lignin, being laid down in a later stage, no clear picture has emerged. Here the orientation of lignin vis-à-vis the cellulose orientation was examined for a number of different fiber structures. It was shown that the lignin in the middle lamella region seems to be non-oriented, thus more resembling an isotropic material, while the lignin in the secondary wall is to some extent oriented. The orientation of this lignin is less pronounced than the orientation of cellulose but has a preferential alignment in the direction of the fiber axis. The reason for this alignment could be related to structural restrictions of this lignin, deposited in the spaces remaining after the initial forming of the structured cellulose/hemicellulose fibrillar structure.

Relationship between wood elastic strain under bending and cellulose crystal strain

Wood is a natural composite material with a complex multi-scale structure. Its stiffness is mainly due to crystalline cellulose fibrils reinforcing the cell walls. In order to quantify the contribution of cellulose to wood elastic properties in both tension and compression, the change in cellulose (0 0 4) lattice spacing (cellulose crystal strain) was measured by X-ray diffraction during a bending test on poplar specimens. A detailed methodology is presented to accurately quantify this cellulose crystal strain. Results show that during elastic loading, cellulose crystal strain is roughly proportional to wood strain. The strain ratio (cellulose crystal strain/wood strain) was close to 0.75, and did not differ significantly in tension and compression. Interpretation of the strain ratio with respect to cellulose orientation shows that part of the wood strain occurs without inducing cellulose crystal strain. This contribution amounts to 10–15% of wood strain, and its possible origin at different levels of wood ultra-structure is discussed.

Microtubules and the tax payer

Plant microtubules have evolved into a versatile tool to link environmental signals into flexible morphogenesis. Cortical microtubules define the axiality of cell expansion by control of cellulose orientation. Plant-specific microtubule structures such as preprophase band and phragmoplast determine symmetry and axiality of cell divisions. In addition, microtubules act as sensors and integrators for stimuli such as mechanic load, gravity, but also osmotic stress, cold and pathogen attack. Many of these functions are specific for plants and involve specific proteins or the recruitment of proteins to new functions. The review aims to ventilate the potential of microtubule-based strategies for biotechnological application by highlighting representative case studies. These include reorientation of cortical microtubules to increase lodging resistance, control of microtubule dynamics to alter the gravity-dependent orientation of leaves, the use of microtubules as sensitive thermometers to improve adaptive cold tolerance of chilling and freezing sensitive plants, the reduction of microtubule treadmilling to inhibit cell-to-cell transport of plant viruses, or the modulation of plant defence genes by pharmacological manipulation of microtubules. The specificity of these responses is controlled by a great variety of specific associated proteins opening a wide field for biotechnological manipulation of plant architecture and stress tolerance.

Differential regulation of cellulose orientation at the inner and outer face of epidermal cells in the Arabidopsis hypocotyl.

It is generally believed that cell elongation is regulated by cortical microtubules, which guide the movement of cellulose synthase complexes as they secrete cellulose microfibrils into the periplasmic space. Transversely oriented microtubules are predicted to direct the deposition of a parallel array of microfibrils, thus generating a mechanically anisotropic cell wall that will favor elongation and prevent radial swelling. Thus far, support for this model has been most convincingly demonstrated in filamentous algae. We found that in etiolated Arabidopsis thaliana hypocotyls, microtubules and cellulose synthase trajectories are transversely oriented on the outer surface of the epidermis for only a short period during growth and that anisotropic growth continues after this transverse organization is lost. Our data support previous findings that the outer epidermal wall is polylamellate in structure, with little or no anisotropy. By contrast, we observed perfectly transverse microtubules and microfibrils at the inner face of the epidermis during all stages of cell expansion. Experimental perturbation of cortical microtubule organization preferentially at the inner face led to increased radial swelling. Our study highlights the previously underestimated complexity of cortical microtubule organization in the shoot epidermis and underscores a role for the inner tissues in the regulation of growth anisotropy.

Is acid-induced extension in seed plants only protein-mediated?

Cell wall extensibility controls the rate of plant cell growth. It is determined by intrinsic mechanical properties of wall polymers and by wall proteins modifying these polymers and their interactions. Heat-inactivation of endogenous cell wall proteins inhibited acid-induced extension of onion epidermis peels transverse to the net cellulose alignment in the cell wall but not parallel to it. In the former case the acid-induced extension could be controlled by expansins and in the latter case by pectins restricting shear between microfibrils. Heat-inactivated cell walls stretched transversely to the net cellulose orientation extended faster at pH 5.7 and slower at pH 4.5 compared to native walls. Expansins seem to be inactive at pH 5.7, so that faster extension may result from heat-induced viscous flow of pectins and conformational changes in the cuticle of the epidermis. This stimulation of wall extension is not seen at pH 4.5 as it is outweighed by the inhibitory effect of expansin heat-inactivation. Thus, cell wall extension in higher plants might be controlled by a complex interplay between protein-dependent and protein-independent mechanisms, the result of which depends on pH and preferential orientation of main wall polymers.

Predicting the longitudinal modulus of elasticity of Sitka spruce from cellulose orientation and abundance

Abstract Sitka spruce (Picea sitchensis) is the most widely planted commercial tree species in the United Kingdom and Ireland. Because of the increasing use of this species for construction, the ability to predict wood stiffness is becoming more important. In this paper, a number of models are developed using data on cellulose abundance and orientation obtained from the SilviScan-3 system to predict the longitudinal modulus of elasticity (MOE) of small defect-free specimens. Longitudinal MOE was obtained from both bending tests and a sonic resonance technique. Overall, stronger relationships were found between the various measures of cellulose abundance and orientation and the dynamic MOE obtained from the sonic resonance measurements, rather than with the static MOE obtained from bending tests. There was only a moderate relationship between wood bulk density and dynamic MOE (R2=0.423), but this relationship was improved when density was divided by microfibril angle (R2=0.760). The best model for predicting both static and dynamic MOE involved the product of bulk density and the coefficient of variation in the azimuthal intensity profile (R2=0.725 and 0.862, respectively). The model parameters obtained for Sitka spruce differed from those obtained in earlier studies on Pinus radiata and Eucalyptus delegatensis, indicating that the model might require recalibration before it can be applied to different species.

Onion epidermis as a new model to study the control of growth anisotropy in higher plants

To elucidate the role of cellulose microfibrils in the control of growth anisotropy, a link between their net orientation, in vitro cell wall extensibility, and anisotropic cell expansion was studied during development of the adaxial epidermis of onion (Allium cepa) bulb scales using polarization confocal microscopy, creep tests, and light microscopy. During growth the net cellulose alignment across the whole thickness of the outer epidermal wall changed from transverse through random to longitudinal and back to transverse relative to the bulb axis. Cell wall extension in vitro was always higher transverse than parallel to the net cellulose alignment. The direction of growth anisotropy was perpendicular to the net microfibril orientation and changed during development from longitudinal to transverse to the bulb axis. The correlation between the degree of growth anisotropy and the net cellulose alignment was poor. Thus the net cellulose microfibril orientation across the whole thickness of the outer periclinal epidermis wall defines the direction but not the degree of growth anisotropy. Strips isolated from the epidermis in the directions perpendicular and transverse to a net cellulose orientation can be used as an extensiometric model to prove a protein involvement in the control of growth anisotropy.

Solution spinning of cellulose carbon nanotube composites using room temperature ionic liquids

Abstract Multiwall carbon nanotube (MWCNT)/cellulose composite fibers were processed from solutions in ethyl methylimidazolium acetate (EMIAc). Rheological percolation in MWCNT/Cellulose/EMIAc solution was observed above 0.01 mass fraction of MWCNT, while electrical percolation in oriented fibers was observed above 0.05 mass fraction of MWCNTs with respect to the weight of the cellulose. Cellulose orientation and crystal size were significantly higher in the composite than in the control cellulose fiber. In addition, in the composite fiber, carbon nanotube orientation was higher than cellulose orientation. At 0.05 mass fraction MWCNT, fiber tensile strength increased by about 25%, strain to failure increased by 100%, and modulus essentially remained unchanged. The composite fibers showed lower thermal shrinkage than the control cellulose fiber. The axial electrical conductivity at 0.1 mass fraction MWCNTs in these oriented fibers was more than 3000 S/m.

Orientation of the wood polymers in the cell wall of spruce wood fibres

Abstract The mechanical and physical properties of wood fibres depend to a large extent on the orientation of the polymers, mainly the cellulose microfibrils, within the supramolecular structure of the cell wall. Under moist conditions, the arrangement within the polymer matrix may play a dominant role for mechanical properties in general and, especially, in the transverse direction. In this context, it is of special interest to determine the orientation of glucomannan and xylan, being the essential components of softwood hemicelluloses, and of lignin in wood fibres. Fourier transform infrared (FTIR) microscopy was used to examine the orientation of the main wood polymers in transversal and longitudinal direction of spruce fibres. We investigated fibres made from a thermomechanical pulp, in which the outer fibre wall layers were removed by mechanical action, and chemically delignified fibres. The polarised FTIR measurements indicated that glucomannan and xylan appear to have a parallel orientation with regard to the orientation of cellulose and, in all probability, an almost parallel orientation with regard to the fibre axis. Lignin was found to be less oriented in the fibre wall, although its arrangement is not fully isotropic. In the longitudinal direction of the fibres, there were no significant changes in the molecular orientation of the studied polymers.

Plants control the properties and actuation of their organs through the orientation of cellulose fibrils in their cell walls

Plants use the orientation of cellulose microfibrils to create cell walls with anisotropic properties related to specific functions. This enables organisms to control the shape and size of cells during growth, to adjust the mechanical performance of tissues, and to perform bending movements of organs. We review the key function of cellulose orientation in defining structural-functional relationships in cell walls from a biomechanics perspective, and illustrate this by examples mainly from our own work. First, primary cell-wall expansion largely depends on the organization of cellulose microfibrils in newly deposited tissue and model calculations allow an estimate of how their passive re-orientation may influence the growth of cells. Moreover, mechanical properties of secondary cell walls depend to a large extent on the orientation of cellulose fibrils and we discuss strategies whereby plants utilize this interrelationship for adaptation. Lastly, we address the question of how plants regulate complex organ movements by designing appropriate supramolecular architectures at the level of the cell wall. Several examples, from trees to grasses, show that the cellulose architecture in the cell wall may be used to direct the swelling or shrinking of cell walls and thereby generate internal growth stress or movement of organs.