On-line Electrospray Ionization Mass Spectrometry Research Articles

Online Sequential Determination of Organic/Inorganic Lead Speciation in PM2.5 Using Electrochemical Mass Spectrometry.

The information regarding the occurrence and abundance of lead (Pb) in PM2.5 is useful for the evaluation of air pollution status and tracing the pollution source. Herein, electrochemical mass spectrometry (EC-MS) for sequential determination of Pb species in PM2.5 samples without sample pretreatment has been developed using the combination of online sequential extraction with mass spectrometry (MS) detection. Four kinds of Pb species including water-soluble Pb compounds, fat-soluble Pb compounds, water/fat-insoluble Pb compounds, and a water/fat-insoluble Pb element were sequentially extracted from PM2.5 samples, in which water-soluble Pb compounds, fat-soluble Pb compounds, and water/fat-insoluble Pb compounds were extracted sequentially by elution using H2O, CH3OH, and EDTA-2Na as the eluent respectively, while the water/fat-insoluble Pb element was extracted by electrolysis using EDTA-2Na as the electrolyte. The extracted water-soluble Pb compounds, water/fat-insoluble Pb compounds, and water/fat-insoluble Pb element were transformed into EDTA-Pb in real time for online electrospray ionization mass spectrometry analysis, while the extracted fat-soluble Pb compounds were directly detected by electrospray ionization mass spectrometry. The advantages of the reported method include the obviation of sample pretreatment, high speed of analysis (<60 min/sample), low detection limit (0.16 pg), low sample consumption (30 μg), and high accuracy (>90%), which indicates the potential of this method for the rapid quantitative species detection of metals in environmental particulate matter samples.

Oxidation of Catechols at the Air-Water Interface by Nitrate Radicals.

Abundant substituted catechols are emitted to, and created in, the atmosphere during wildfires and anthropogenic combustion and agro-industrial processes. While ozone (O3) and hydroxyl radicals (HO•) efficiently react in a 1 μs contact time with catechols at the air-water interface, the nighttime reactivity dominated by nitrate radicals (NO3) remains unexplored. Herein, online electrospray ionization mass spectrometry (OESI-MS) is used to explore the reaction of NO3(g) with a series of representative catechols (catechol, pyrogallol, 3-methylcatechol, 4-methylcatechol, and 3-methoxycatechol) on the surface of aqueous microdroplets. The work detects the ultrafast generation of nitrocatechol (aromatic) compounds, which are major constituents of atmospheric brown carbon. Two mechanisms are proposed to produce nitrocatechols, one (equivalent to H atom abstraction) following fast electron transfer from the catechols (QH2) to NO3, forming NO3- and QH2•+ that quickly deprotonates into a semiquinone radical (QH•). The second mechanism proceeds via cyclohexadienyl radical intermediates from NO3 attack to the ring. Experiments in the pH range from 4 to 8 showed that the production of nitrocatechols was favored under the most acidic conditions. Mechanistically, the results explain the interfacial production of chromophoric nitrocatechols that modify the absorption properties of tropospheric particles, making them more susceptible to photooxidation, and alter the Earth's radiative forcing.

Characterization of therapeutic mAb charge heterogeneity by iCIEF coupled to mass spectrometry (iCIEF-MS).

Imaged capillary isoelectric focusing (iCIEF) has emerged as an important technique for therapeutic monoclonal antibody (mAb) charge heterogeneity analysis in the biopharmaceutical context, providing imaged detection and quantitation by UV without a mobilization step. Besides quantitation, the characterization of separated charge variants ideally directly by online electrospray ionization-mass spectrometry (ESI-MS) is crucial to ensure product quality, safety, and efficacy. Straightforward direct iCIEF-MS coupling combining high separation efficiency and quantitative results of iCIEF with the characterization power of MS enables deep characterization of mAb charge variants. A short technical setup and optimized methodical parameters (30nl/min mobilization rate, 2%-4% ampholyte concentration, 0.5-2mg/ml sample concentration) allow successful mAb charge variant peak assignment from iCIEF to MS. Despite a loss of separation resolution during the transfer, separated intact mAb charge variants, including deamidation as well as major and minor glycoforms even from low abundant charge variants, could be characterized by online ESI-MS with high precision. The presented setup provides a large potential for mAb charge heterogeneity characterization in biopharmaceutical applications.

Microsampling with a Solid-Phase Extraction Cartridge: Storage and Online Mass Spectrometry Analysis.

This study aims to introduce the concept of utilizing a solid-phase extraction (SPE) cartridge for remote biofluid collection, followed by direct sample analysis at a later time. For this, a dried matrix spot was prepared in a syringe, in the form of SPE cartridge for the first time to enable small biofluid collection (microsampling), storage, shipment, and online electrospray ionization (ESI) mass spectrometry (MS) analysis of the stored dried samples. The SPE sorbents were packed into an ESI syringe and the resultant cartridge was used for sampling small volumes (<20 μL) of different complex biological fluids including blood, plasma, serum, and urine. The collected sample was stored in the dry state within the confinement of the SPE sorbent at room temperature, and analyte stability (e.g., diazepam) was maintained for more than a year. Direct coupling of the SPE cartridge to MS provides excellent accuracy, precision, and sensitivity for analyzing illicit drugs present in the biofluid. The corresponding mechanism of wrong-way positive ion generation from highly basic elution solvents was explored. Without chromatography, our direct SPE-ESI-MS analysis technique afforded detection limits as low as 26 and 140 pg/mL for raw urine and untreated plasma, respectively. These promising results proved that the new syringe-based SPE cartridge can serve as a good alternative to conventional microsampling techniques in terms of analyte stability, ease of operation and versatility, and analytical sensitivity and speed.

One-step hexaplex immunoassays by on-line paper substrate-based electrospray ionization mass spectrometry for combined cancer biomarker screening.

Mass spectrometry (MS) is attractive as a multiplexed immunoassay readout benefiting from its high sensitivity, speed and mass resolution. Here, a simple paper-based hexaplex immunoassay with an on-line MS readout was proposed, using functionalized paper as the immune substrates, along with rhodamine-based mass tags assembled on gold nanoparticles prepared as the mass probes (MPs). Simultaneous immune capture and labeling were conducted in one step on paper substrates in 96-well plates with a high throughput within 30 minutes, and the on-line efficient dissociation of the mass tags highly facilitated the hexaplex readout of the immune signals by a newly established on-line paper substrate-based electrospray ionization-MS setup. Six MPs were synthesized for the simultaneous quantification of six important cancer protein markers (cancer antigen 15-3, cancer antigen 19-9, carcinoma embryonic antigen, cancer antigen 125, human epididymis protein 4, and alpha fetoprotein) using only 10 μL serum, presenting satisfactory sensitivity, accuracy and specificity. This platform was further tested in screening for the six biomarkers in serum samples of patients with breast, liver and gastric cancers, showing its high potential for sensitive and specific early cancer diagnosis.

Oxidation of Phenolic Aldehydes by Ozone and Hydroxyl Radicals at the Air-Water Interface.

Biomass burning releases highly reactive methoxyphenols into the atmosphere, which can undergo heterogeneous oxidation and act as precursors for secondary organic aerosol (SOA) formation. Understanding the reactivity of such methoxyphenols at the air-water interface is a matter of major atmospheric interest. Online electrospray ionization mass spectrometry (OESI-MS) is used here to study the oxidation of two methoxyphenols among three phenolic aldehydes, 4-hydroxybenzaldehyde, vanillin, and syringaldehyde, on the surface of water. The OESI-MS results together with cyclic voltammetry measurements at variable pH are integrated into a mechanism describing the heterogeneous oxidative processing of methoxyphenols by gaseous ozone (O3) and hydroxyl radicals (HO•). For a low molar ratio of O3 ≤ 66 ppbv, the OESI-MS spectra show that the oxidation is dominated by in situ produced HO• and results in the production of polyhydroxymethoxyphenols. When the level of O3 increases (i.e., ≥78 times), the ion count of polyhydroxymethoxyphenols increases, while new ring fragmentation products are generated, including conjugated aldehydes and double bonds as well as additional carboxylic acid groups. The interfacial reactivity of methoxyphenols with O3 and HO• is enhanced as the number of methoxy (-OCH3) groups increases (4-hydroxybenzaldehyde < vanillin < syringaldehyde). The experimental observations are summarized in two reaction pathways, leading to the formation of (1) hydroxylated methoxyphenols and (2) multifunctional carboxylic acids from fragmentation of the aromatic ring. The new highly oxygenated products with low volatility are excellent precursors for aqueous SOA formation.

Targeting a Subset of the Membrane Proteome for Top–Down Mass Spectrometry: Introducing the Proteolipidome

A subsection of integral membrane proteins partition into chloroform during a chloroform/methanol/water extraction primarily designed to extract lipids. Traditionally, these proteins were called proteolipids due to their lipid-like properties; the c-subunit of the ATP synthase integral FO component is the best known due to its abundance. In this manuscript, we investigate purification of proteolipid proteins away from lipids for high-resolution mass spectrometry. Size-exclusion chromatography on silica beads using a chloroform/methanol/aqueous formic acid (4/4/1; v/v) mobile phase allowed the separation of larger proteins (>3 kDa) from lipids (<1.5 kDa) and analysis by online electrospray ionization mass spectrometry. Fraction collection for mass spectrometry was limited by presence of plasticizers and other contaminants solubilized by chloroform. Drying down of the protein sample followed by resuspension in formic acid (70%) allowed reverse-phase chromatography on a polymeric support at elevated temperature, as described previously. Fractions collected in this way could be stored for extended periods at −80 °C without adducts or contaminants. Top–down mass spectrometry enabled the definition of PsaI as a novel proteolipid of spinach thylakoid membrane. Proteolipid preparation worked similarly when total membranes from mouse brains were extracted with chloroform. While it might be tempting to use the described extraction, we prefer to broaden the meaning of the term, whereby the proteolipidome is defined as a novel biological membrane proteome that includes the full complement of membrane proteins, their binding partners/ligands and their tightly bound structural lipids that constitute each protein–lipid complex’s functional unit; that is, a complete description of a biological membrane.

Stability of Monoterpene-Derived α-Hydroxyalkyl-Hydroperoxides in Aqueous Organic Media: Relevance to the Fate of Hydroperoxides in Aerosol Particle Phases.

The α-hydroxyalkyl-hydroperoxides [R-(H)C(-OH)(-OOH), α-HH] produced in the ozonolysis of unsaturated organic compounds may contribute to secondary organic aerosol (SOA) aging. α-HHs' inherent instability, however, hampers their detection and a positive assessment of their actual role. Here we report, for the first time, the rates and products of the decomposition of the α-HHs generated in the ozonolysis of atmospherically important monoterpenes α-pinene (α-P), d-limonene (d-L), γ-terpinene (γ-Tn), and α-terpineol (α-Tp) in water/acetonitrile (W/AN) mixtures. We detect α-HHs and multifunctional decomposition products as chloride adducts by online electrospray ionization mass spectrometry. Experiments involving D2O and H218O, instead of H216O, and an OH-radical scavenger show that α-HHs decompose into gem-diols + H2O2 rather than free radicals. α-HHs decay mono- or biexponentially depending on molecular structure and solvent composition. e-Fold times, τ1/e, in water-rich solvent mixtures range from τ1/e = 15-45 min for monoterpene-derived α-HHs to τ1/e > 103 min for the α-Tp-derived α-HH. All τ1/e's dramatically increase in <20% (v/v) water. Decay rates of the α-Tp-derived α-HH in pure water increase at lower pH (2.3 ≤ pH ≤ 3.3). The hydroperoxides detected in day-old SOA samples may reflect their increased stability in water-poor media and/or the slow decomposition of α-HHs from functionalized terpenes.

Limitation standard of toxic aconitines in Aconitum proprietary Chinese medicines using on-line extraction electrospray ionization mass spectrometry

Development of rapid analytical methods and establishment of toxic component limitation standards are of great importance in quality control of traditional Chinese medicine. Herein, an on-line extraction electrospray ionization mass spectrometry (oEESI-MS) coupled with a novel whole process integral quantification strategy was developed and applied to direct determination of nine key aconitine-type alkaloids in 20 Aconitum proprietary Chinese medicines (APCMs). Multi-type dosage forms (e.g., tablets, capsules, pills, granules, and liquid preparation) of APCM could be determined directly with excellent versatility. The strategy has the characteristics of high throughput, good tolerance of matrix interference, small amount of sample (∼0.5 mg) and reagent (∼240 μL) consumption, and short analysis time for single sample (<15 min). The results were proved to be credible by high performance liquid chromatography−mass spectrometry (LC–MS) and electrospray ionization mass spectrometry, respectively. Moreover, the limitation standard for the toxic aconitines in 20 APCMs was established based on the holistic weight toxicity (HWT) evaluation and the Chinese Pharmacopoeia severally, and turned out that HWT-based toxicity evaluation results were closer to the real clinical applications. Hence, a more accurate and reliable APCM toxicity limitation was established and expected to play an important guiding role in clinics. The current study extended the power of ambient MS as a method for the direct quantification of molecules in complex samples, which is commonly required in pharmaceutical analysis, food safety control, public security, and many other disciplines.

Online mass spectrometry of CE (SDS)-separated proteins by two-dimensional capillary electrophoresis.

Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) is the fundamental technique for protein separation by size. Applying this technology in capillary format, gaining high separation efficiency in a more automated way, is a key technology for size separation of proteins in the biopharmaceutical industry. However, unequivocal identification by online mass spectrometry (MS) is impossible so far, due to strong interference in the electrospray process by SDS and other components of the SDS-MW separation gel buffer. Here, a heart-cut two-dimensional electrophoretic separation system applying an electrically isolated valve with an internal loop of 20nL is presented. The peak of interest in the CE (SDS) separation is transferred to the CZE-MS, where electrospray-interfering substances of the SDS-MW gel are separated prior to online electrospray ionization mass spectrometry. An online SDS removal strategy for decomplexing the protein-SDS complex is implemented in the second dimension, consisting of the co-injection of organic solvent and cationic surfactant. This online CE (SDS)-CZE-MS system allows MS characterization of proteoforms separated in generic CE (SDS), gaining additional separation in the CZE and detailed MS information. In general, the system can be applied to all kinds of proteins separated by CE (SDS). Here, we present results of the CE (SDS)-CZE-MS system on the analysis of several biopharmaceutically relevant antibody impurities and fragments. Additionally, the versatile application spectrum of the system is demonstrated by the analysis of extracted proteins from soybean flour. The online hyphenation of CE (SDS) resolving power and MS identification capabilities will be a powerful tool for protein and mAb characterization. Graphical abstract Two-dimensional capillary electrophoresis system hyphenated with mass spectrometry for the characterization of CE (SDS)-separated proteins. As first dimension, a generic and high MS-interfering CE (SDS) separation is performed for size separation. After heart-cut transfer of the unknown CE (SDS) protein peak, via a four-port nanoliter valve to a volatile electrolyte system as second dimension, interference-free mass spectrometric data of separated mAb fragments and soybean proteins are obtained.

Mechanistic Analysis of the C-H Amination Reaction of Menthol by CuBr2 and Selectfluor.

The mechanism of the Ritter-type C-H amination reaction of menthol with acetonitrile using CuBr2, Selectfluor, and Zn(OTf)2, first disclosed by Baran and coworkers in 2012, was studied using a combination of online electrospray ionization mass spectrometry, continuous UV/vis spectrometric monitoring, and density functional theory calculations. In addition to corroborating Baran's original mechanistic proposal, these studies uncovered a second pathway to product formation, which likely only occurs in microdroplets. DFT calculations show that neither pathway has a barrier that is greater than 6.8 kcal/mol, suggesting that both mechanisms are potentially operative under ambient conditions.

PH-Dependent Singlet O2 Oxidation Kinetics of Guanine and 9-Methylguanine: An Online Mass Spectrometry and Spectroscopy Study Combined with Theoretical Exploration.

We report a kinetic and mechanistic study on the title reactions, in which 1O2 was generated by the reaction of H2O2 with Cl2 and bubbled into an aqueous solution of guanine and 9-methylguanine (9MG) at different pH values. Oxidation kinetics and product branching ratios were measured using online electrospray ionization mass spectrometry coupled with absorption and emission spectrophotometry, and product structures were determined by collision-induced dissociation (CID) tandem mass spectrometry. Experiments revealed strong pH dependence of the reactions. The oxidation of guanine is noticeable only in basic solution, while the oxidation of 9MG is weak in acidic solution, increases in neutral solution, and becomes intensive in basic solution. 5-Guanidinohydantoin (Gh) and spiroiminodihydantoin (Sp) were detected as the major oxidation products of guanine and 9MG, and Sp became dominant in basic solution. A reaction intermediate was captured in mass spectra, and assigned to gem-diol on the basis of CID measurements. This intermediate served as the precursor for the formation of Gh. After taking into account solution compositions at each pH, first-order oxidation rate constants were extracted for individual species: that is, 3.2-3.6 × 107 M-1 s-1 for deprotonated guanine, and 1.2 × 106 and 4.6-4.9 × 107 M-1 s-1 for neutral and deprotonated 9MG, respectively. Guided by approximately spin-projected density-functional-theory-calculated reaction potential energy surfaces, the kinetics for the initial 1O2 addition to guanine and 9MG was evaluated using transition state theory (TST). The comparison between TST modeling and experiment confirms that 1O2 addition is rate-limiting for oxidation, which forms endoperoxide and peroxide intermediates as determined in previous measurements of the same systems in the gas phase.

Separation and identification of oligomeric vinylmethoxysiloxanes by gradient elution chromatography coupled with electrospray ionization mass spectrometry

A high-performance liquid chromatography with online electrospray ionization mass spectrometry (HPLC–ESI-MS) has been used to separate and identify the reaction products resulting from controlled acid-catalyzed hydrolytic polycondensation of vinyltrimethoxysilane (VMS). The reaction products were prepared in the molar ratio of water to VMS (r1) ranging from 0.6 to 1.2, characterized by standard spectroscopic techniques, and subsequently analyzed by HPLC–UV absorbance detection and HPLC–ESI-MS. Linear vinylmethoxysiloxane oligomers with the number of repeat units (n) ranging from 3 to 11 are predominant species at the beginning of the reaction (for r1=0.6). Then they transform into monocyclic (for r1=1.0) and bicyclic (for r1=1.2) species with gradually increasing amount of water in the reaction mixture. The oligomer conversions suggest that structure growth of vinylmetoxysiloxanes proceeds by nonrandom cyclization reactions, which are favored over chain extension under the chosen reaction conditions. Direct ESI-MS, HPLC–ESI-MS and HPLC–UV were used to determine the molar mass distributions for the vinylmethoxysiloxane oligomers prepared in three different values of r1. The molar mass averages increase slightly with the amount of water in the reaction mixture and vary somewhat with the method used. Our results indicate that with the combined capability of separation, sensitivity and identification, HPLC–ESI-MS is especially useful to study highly complex silicon-based compounds with hyperbranched, caged or cubic structures as building blocks for hybrid materials.

Fenton Oxidation of Gaseous Isoprene on Aqueous Surfaces

We report that gaseous isoprene ISO(g) is oxidized into soluble species on the surface of aqueous acidic FeCl2 solutions simultaneously exposed to H2O2(g). In our experiments, ISO(g) and/or H2O2(g) streams intersect aqueous pH ∼ 2 FeCl2 microjets for ∼10 μs. The products formed in these reactive encounters are identified in situ via online electrospray ionization mass spectrometry. We found that the (ISO)nH+ oligomers generated from ISO(g) on the surface of pH < 4 water are oxidized into myriad products whose combined yields exceed 5%. MS2 analysis reveals that the positive ions derived from the protonation of neutral products split H2O and O neutrals, whereas the less abundant negative carboxylate ion products undergo CO, H2O, and CO2 losses. Significantly, all products are fully quenched by ·OH scavenger tert-butyl alcohol. These results are consistent with an oxidation process initiated by the addition of ·OH from (Fe2+(aq) + H2O2(g)) to (ISO)nH+, followed by fast reactions involving dissolved H2O2, HO...

Analysis of glycosaminoglycan-derived, precolumn, 2-aminoacridone–labeled disaccharides with LC-fluorescence and LC-MS detection

Glycosaminoglycans (GAGs) possess considerable heterogeneity in average molecular mass, molecular mass range, disaccharide composition and content and position of sulfo groups. Despite recent technological advances in the analysis of GAGs, the determination of GAG disaccharide composition still remains challenging and provides key information required for understanding GAG function. Analysis of GAG-derived disaccharides relies on enzymatic treatment, providing one of the most practical and quantitative approaches for compositional mapping. Tagging the reducing end of disaccharides with an aromatic fluorescent label affords stable derivatives with properties that enable improved detection and resolution. HPLC with on-line electrospray ionization mass spectrometry (ESI-MS) offers a relatively soft ionization method for detection and characterization of sulfated oligosaccharides. GAGs obtained from tissues, biological fluids or cells are treated with various enzymes to obtain disaccharides that are fluorescently labeled with 2-aminoacridone (AMAC) and resolved by different LC systems for high-sensitivity detection by fluorescence, and then they are unambiguously characterized by MS. The preparation and labeling of GAG-derived disaccharides can be performed in ∼1-2 d, and subsequent HPLC separation and on-line fluorescence detection and ESI-MS analysis takes another 1-2 h.

Long-Range Hofmeister Effects of Anionic and Cationic Amphiphiles

Specific ion effects at aqueous interfaces play key roles in many important phenomena. We recently reported that ions interact specifically over unexpectedly long distances on the surface of sub-micromolar electrolyte solutions (Enami et al. J. Chem. Phys. 2012, 136, 154707). Whether the anionic and cationic headgroups of the organic amphiphiles present at most water/hydrophobe interfaces act similarly or display new behaviors, however, is not known. Here we report the results of experiments in which we apply online electrospray ionization mass spectrometry (ESI-MS) to investigate how carboxylate, RCOO(-) (R = CH3, C5H11, C7H15), and alkylammonium, R'(CH3)3N(+) (R' = CH3, C14H29), ions affect the ratio χ = I(-)/Br(-) at the aerial interface of 1 μM (NaI + NaBr) aqueous solutions. We found that χ is systematically but selectively depressed by these ionic amphiphiles and minimally affected by the neutral surfactant 1-octanol. The depressing effects induced by cationic headgroups are stronger than those caused by anionic surfactants and always increase with the length of the alkyl chains.

Long-range specific ion-ion interactions in hydrogen-bonded liquid films

Anions populate fluid interfaces specifically. Here, we report experiments showing that on hydrogen-bonded interfaces anions interact specifically over unexpectedly long distances. The composition of binary electrolyte (Na(+), X(-)∕Y(-)) films was investigated as a function of solvent, film thickness, and third ion additions in free-standing films produced by blowing up drops with a high-speed gas. These films soon fragment into charged sub-micrometer droplets carrying excess anions detectable in situ by online electrospray ionization mass spectrometry. We found that (1) the larger anions are enriched in the thinner (nanoscopic air-liquid-air) films produced at higher gas velocities in all (water, methanol, 2-propanol, and acetonitrile) tested solvents, (2) third ions (beginning at sub-μM levels) specifically perturb X(-)∕Y(-) ratios in water and methanol but have no effect in acetonitrile or 2-propanol. Thus, among these polar organic liquids (of similar viscosities but much smaller surface tensions and dielectric permittivities than water) only on methanol do anions interact specifically over long, viz.: <ri - rj>∕nm = 150 (c∕μM)(-1∕3), distances. Our findings point to the extended hydrogen-bond networks of water and methanol as likely conduits for such interactions.

Quantitative analysis of oleic acid and three types of polyethers according to the number of hydroxy end groups in Polysorbate 80 by hydrophilic interaction chromatography at critical conditions

A quantitative characterization of Polysorbate 80 is crucial for its many applications. In this paper we report a quick RP-HPLC method for the quantitative determination of Polysorbate 80. The hydrolysis of Polysorbate 80 to release oleic acid and three types of polyethers was first carried out. A chromatographic method based on liquid chromatography at critical conditions (LCCC) was then developed for an endgroup-based separation of low-molecular-mass polyether. With this method the polyether, irrespective of its molecular-mass, is separated according to endgroups (functionality) due to interactions of the polar endgroups with the hydrophilic stationary phase. The different types of polyethers and oleic acid were identified using on-line electrospray ionization mass spectrometry and quantified by evaporative light scattering detection.

Anions dramatically enhance proton transfer through aqueous interfaces

Proton transfer (PT) through and across aqueous interfaces is a fundamental process in chemistry and biology. Notwithstanding its importance, it is not generally realized that interfacial PT is quite different from conventional PT in bulk water. Here we show that, in contrast with the behavior of strong nitric acid in aqueous solution, gas-phase HNO(3) does not dissociate upon collision with the surface of water unless a few ions (> 1 per 10(6) H(2)O) are present. By applying online electrospray ionization mass spectrometry to monitor in situ the surface of aqueous jets exposed to HNO(3(g)) beams we found that NO(3)(-) production increases dramatically on > 30-μM inert electrolyte solutions. We also performed quantum mechanical calculations confirming that the sizable barrier hindering HNO(3) dissociation on the surface of small water clusters is drastically lowered in the presence of anions. Anions electrostatically assist in drawing the proton away from NO(3)(-) lingering outside the cluster, whose incorporation is hampered by the energetic cost of opening a cavity therein. Present results provide both direct experimental evidence and mechanistic insights on the counterintuitive slowness of PT at water-hydrophobe boundaries and its remarkable sensitivity to electrostatic effects.

Structural Characterization of BAX 855, a PEGylated Recombinant FVIII

Abstract 4356Baxter and Nektar have developed a longer acting recombinant FVIII (BAX 855), which is manufactured by coupling stable PEG using Nektar technology to Baxter's full-length rFVIII bulk drug substance from the protein-free ADVATE™ manufacturing process. BAX 855 was characterized by a number of analytical methods, focusing on the elucidation of the primary structure, posttranslational modifications, PEGylation site distribution and three-dimensional structure.The primary structure of BAX 855 was investigated using a peptide mapping approach. Samples were digested with trypsin and the resulting peptides were separated by reversed phase chromatography and detected with on-line electrospray ionization mass spectrometry. This approach resulted in a sequence coverage of 94% with good consistency demonstrated between different BAX 855 batches. Protein-bound oligosaccharides were determined by normal phase HPLC of fluorescence labeled N-glycans released by PNGase F treatment. The composition of the N-linked oligosaccharides showed a similar pattern between BAX 855 and unmodified rFVIII, confirming that the N-glycosylation pattern remained intact during the PEGylation process.PEGylation site distribution and detailed analysis of the consistency of PEGylation was investigated by activating BAX 855 with thrombin. The resulting PEGylated and non-PEGylated fragments were separated using a RP-HPLC approach and the bound PEG was measured for each thrombin fragment. The distribution of PEG among the different thrombin fragments of rFVIII was shown to be consistent between several BAX 855 batches. Moreover, RP-HPLC of native BAX 855 showed reproducible subunit composition and PEGylation.SDS-PAGE and Western blot analysis of BAX 855 revealed changes in the electrophoretic pattern due to PEGylation without the appearance of any relevant degradation products. The random PEGylation of rFVIII was shown using antibodies with different epitope specificities. Dynamic light scattering and Fourier-transformed infrared spectroscopy (FTIR) were used to monitor the consistency of three dimensional structures. The mean hydrodynamic diameter of BAX 855 was between 30 and 40 nm, which is a characteristic size for a ∼300-kDa protein. Several BAX 855 batches showed almost overlapping FTIR absorbance spectra, especially in the conformationally susceptible amide I and amide II peak at 1650 and 1550 cm−1, respectively, indicative for good consistency of the manufacturing process.In summary, BAX 855, a PEGylated rFVIII derivative, can be manufactured reproducibly without changes to the protein structure characteristic for a fully functional FVIII molecule. Disclosures:Kaliwoda:Baxter Innovations GmbH: Employment. Graninger:Baxter Innovations GmbH: Employment. Matthiessen:Baxter Innovations GmbH: Employment. Schrenk:Baxter Innovations GmbH: Employment. Turecek:Baxter Innovations GmbH: Employment. Mitterer:Baxter Innovations GmbH: Employment. Ehrlich:Baxter Innovations GmbH: Employment. Scheiflinger:Baxter Innovations GmbH: Employment.