Occurrence Of Heavy Metals Research Articles

Adsorption and desorption of heavy metals at water sediment interface based on bayesian model

Estuarine areas are not only the main gathering point for human sewage but also the place where one-way and two-way fluids interact, thus forming a complex and changeable geochemical physical field. Here, heavy metals (HMs) are adsorbed and desorbed due to physical, chemical, and biochemical processes. However, the adsorption and desorption behavior of HMs in the aquatic environment is complex, and physicochemical processes occurring in the estuarine sediment-water interface control the direction and boundaries of the system. This study analyzed the migration and distribution of HMs in rivers and lakes, and established a Bayesian network model to quantitatively understand the impact of nutrients and key environmental factors on the adsorption-desorption behavior of HMs in lake and estuaries, as well as the competitive relationship between environmental factors. The influence of environmental factors and the occurrence of HMs are both important model inputs. Our findings indicated that the migration risk of Cd in Qinghai Lake was high. Environmental factors such as Cation exchange capacity (CEC), Organic matter (OM), Soluble fluoride (SFL), and pH play the most important role in the adsorption and desorption of HMs. Our findings also indicated that the exchange and activity of HMs in sediments were much higher than in the overlying water. The organic matter content was the most complex environmental factor affecting HMS adsorption and desorption at the water-sediment interface. Additionally, the mass concentration of dissolved oxygen (DO) has a linear relationship with bioavailable HMs in river and lake sediments, but has no linear relationship with the concentration of water-soluble HMs. Interestingly, there are synergistic effects between environmental factors, which directly or indirectly affect the release of bioavailable HMs. However, it is important to determine whether the effects of different environmental factors on the exchange of bioavailable HMs are negative or positive. Our findings suggested that Bayesian network (BN) signals (positive or negative) could provide insights into the transfer direction of metals in the water-sediment interface.

Occurrence, sources and risk of heavy metals in soil from a typical antimony mining area in Guizhou Province, China.

Antimony mining activities can result in serious contamination of soil by heavy metals, which represents a risk to human health. In this study, the contamination and sources of 14 heavy metals, and their risks to both ecosystem and public health from these metals at an antimony mining site in Guizhou Province in China were explored. The results showed that the mean concentrations of Hg, Cu, As, Se, Cd, Sn, Sb and Pb were 3.73, 2.49, 13.99, 38.32, 1.11, 1.61, 305.33, 1.59 times than their local background levels. Sb, Se, As and Hg presented the relatively heavy pollution, wherein Sb (EI = 2137.34 > 320), Hg (EI = 150.26 > 80) and As (EI = 139.92 > 80) also posed the strong ecological risk. The sources identification illustrated Hg, Pb, As, Bi, Cr, Sb, Cd and Zn were attributed to industrial activities, Ni, Co, Au and Cu (p < 0.01) were derived from a combination of a lithogeny origin and anthropogenic source, whereas Se was of natural origin. Health risk assessment demonstrated that Ni, Cr and As presented both the unacceptable noncarcinogenic and carcinogenic risk, and Sb (HI = 1.44E+03) and Cd (HI = 2.91E+00) posed unacceptable noncarcinogenic risk to the local resident. Furthermore, children in the 1-6 age group (HI = 7.83E+02) were more sensitive to noncarcinogenic risk, and the 6-18 age group (CRI = 2.39E-02) as more prone to carcinogenic risk. The dermal contact was the predominant exposure pathway of noncarcinogenic and carcinogenic risks with a contribution rate of over 97% for all age groups. Overall, this research provided the comprehensive information on heavy metals in an antimony mining sites, and the related heavy metals should be paid attention for ensuring soil safety and protecting local people's health.

A systematic study on occurrence, risk estimation and health implications of heavy metals in potable water from different sources of Garhwal Himalaya, India

The occurrence of heavy metals (HMs) in drinking water has been a critical water quality concern for a long time and can compromise its aesthetic value to the larger extent. Chronic exposure of human beings to these toxic and non-toxic HMs through water ingestion can result in significant health risks. To assess these associated health risks, the present study was planned, designed and carried out for analyses of nine HMs namely, Al, Cr, Mn, Co, Ni, Cu, Zn, Cd and Pb in the potable water samples collected from different sources located across the Mandakini valley of Garhwal Himalaya, India using Inductively Coupled Plasma Mass Spectrometry. The measured values of Al, Cr, Mn, Co, Ni, Cu, Zn, Cd and Pb were found in the range of BDL–27.4 µg l−1, 0.26–4.5 µg l−1, BDL–139 µg l−1, 0.02–0.9 µg l−1, 0.4–5.5 µg l−1, 0.07–9.2 µg l−1, BDL–4164 µg l−1, BDL–0.8 µg l−1, and BDL–11.2 µg l−1, respectively. The observed values of analyzed HMs except Zn and Pb were found below the reference values prescribed by the WHO, USEPA and BIS. In addition, Zn concentration exceeded its maximum permissible limit (4000 µg l−1) recommended by WHO for infants at one station only. The observed indices show that there are no health risks from HMs contamination via drinking water in the region. Moreover, the estimated hazard quotients for children and adults also revealed no potential health risks. The results of present study will be useful as baseline data for state and national regulatory agencies.

Investigating the impact of long-term agricultural practices on selected peri-urban aquifers in tropical Southwest India

Hydrogeochemical evaluation of groundwater resources is of paramount significance in the tropics as it aids identification of safe and sustainable water resources. Evaluation of heavy metals in water is necessary as they integrate into the food chain and pose deleterious effects on human and aquatic life. To identify the extent of heavy metal occurrence in groundwater, 40 samples were collected seasonally from dug wells located in agriculture-intensive areas and analysed for physicochemical parameters and heavy metals. Water quality and pollution indices were used to evaluate overall groundwater quality and threat to humankind. The heavy metal concentrations in groundwater were observed in the increasing sequence of Zn > Cu > Pb > Ni > Co (post-monsoon) and Zn > Pb > Cu > Ni > Co (pre-monsoon). Heavy metal pollution index (HPI) revealed that the dissolved heavy metal content was found below critical value. Correlation analysis (CA) and principal component analysis (PCA) revealed that the groundwater hydrochemistry is influenced by geogenic (rock-water interaction, precipitation, simple dissolution, and base-exchange reactions) and anthropogenic sources. The results of this study will help in developing a long-term groundwater monitoring system for metal pollution, sustainable management, and conservation of peri-urban groundwater resources to achieve water security.

Strategies for microbial bioremediation of environmental pollutants from industrial wastewater: A sustainable approach

Heavy metals are hazardous and bring about critical exposure risks to humans and animals, even at low concentrations. An assortment of approaches has been attempted to remove the water contaminants and keep up with water quality, for that microbial bioremediation is a promising way to mitigate these pollutants from the contaminated water. The flexibility of microorganisms to eliminate a toxic pollutant creates bioremediation an innovation that can be applied in various water and soil conditions. This review insight into the sources, occurrence of toxic heavy metals, and their hazardous human exposure risk. In this review, significant attention to microbial bioremediation for pollutant mitigation from various ecological lattices has been addressed. Mechanism of microbial bioremediation in the aspect of factors affecting, the role of microbes and interaction between the microbes and pollutants are the focal topics of this review. In addition, emerging strategies and technologies developed in the field of genetically engineered micro-organism and micro-organism-aided nanotechnology has shown up as powerful bioremediation tool with critical possibilities to eliminate water pollutants.

Occurrence, Fate, and Implications of Heavy Metals during Anaerobic Digestion: A Review

Over the years, anaerobic digestion (AD) has evolved as a competent technology to retrieve energy potential from various organic substrates, including wastewater. However, the energy metabolisms of anaerobic microorganisms, biochemical reactions, and biogas production are affected by various parameters, including heavy metals. It is important to understand the interaction of heavy metals with anaerobes and their potential influence on the process to enhance energy potential. This review methodically outlines the occurrence and role of heavy metals in the AD process. Additionally, the repercussions of the most common heavy metals (i.e., Cu, Zn, Cd, Fe, and Ni) on each stage of AD (i.e., hydrolysis, acidogenesis, and methanogenesis) have been discussed. We found that traces of heavy metals can endorse anaerobic digestion, but inhibition increases with increasing concentration. Methanogenic archaea are more susceptible to heavy metal inhibition than hydrolytic and acidogenic archaea. An improved understanding and relevant intuition will help to promote biogas production along with heavy metal management.

Distribution and ecological risk assessment of heavy metals in sediments of Dajiuhu Lake Wetland in Shennongjia, China.

The rapid development of modern society has resulted in discharge of large, heavy metal quantities into wetlands that have been continuously accumulating, causing severe pollution. Dajiuhu, located in the Shennongjia Forest District of Hubei Province in China, is a wetland of significant value internationally, serving as a model wetland ecosystem with heightened scientific research value. In this study, 27 surface sediment samples from nine sub-lakes in Dajiuhu were collected in August 2020. The concentrations of Cd, Cr, Cu, Ni, Pb, and Zn in the sediments were determined. The heavy metal occurrence and speciation characteristics were analyzed by an improved BCR (European Community Bureau of Reference) extraction method. Four methods were used to evaluate heavy metals' pollution degree and ecological risk. The possible source of heavy metals was inferred using correlation analysis and principal component analysis. The heavy metal content in the lake sediments of Dajiuhu wetland was from the highest to the lowest concentration as follows: Zn [Formula: see text] Cr [Formula: see text] Ni [Formula: see text] Pb [Formula: see text] Cu [Formula: see text] Cd. The average Cd content exceeded the national nature reserve threshold values, while the other heavy metals measured were below their respective threshold values. However, due to the occurrence of Pb and Cd in different forms, they still pose certain pollution and ecological risk to the lake wetlands. On the other hand, Zn, Cr, Ni, and Cu do not pose an ecological risk in the lakes of the Dajiuhu wetland. The spatial distribution of heavy metal content in the nine sub-lakes did vary significantly. Regarding the heavy metal sources in the lake sediments, Ni, Cr, and Cu originate from natural factors, and Cd and Pb have mainly anthropogenic origins. In contrast, Zn has both natural and anthropogenic origins. This study provides further insights into the study of heavy metal pollution in lake wetlands. It provides a framework and a direction for managing heavy metal pollution in the Dajiuhu wetland.

Occurrence of heavy metals in surface water bodies in rice cultivation areas in Trincomalee district, Sri Lanka

Occurrence of heavy metals in surface water bodies in rice cultivation areas in Trincomalee district, Sri Lanka

Occurrence and accumulation of heavy metals in algal turf particulates and sediments on coral reefs.

Algal turfs form a critical interface on coral reefs that interacts with several key ecosystem processes. While we know these turfs have a remarkable propensity to accumulate sediments, which can have a range of ecosystem impacts, their role as sinks for heavy metals remains largely unexamined. Here we quantified the concentration of 15 metals in algal turf sediments from Lizard Island and Orpheus Island on the Great Barrier Reef, and specifically explored how the loads of arsenic, cobalt, iron and lead were related to turf length. Metal composition differed markedly between the two islands, with the composition at Orpheus Island suggesting closer links to terrestrial sediment sources. Furthermore, metal loads increased significantly with turf length, suggesting that longer turfs can accumulate these pollutants on reefs. Given that algal turfs are a crucial component of herbivorous/detritivorous trophic pathways, this could represent a key juncture at which these metals enter food chains.

Occurrence and distribution of heavy metals in water and soil sediments of Vellore District, Tamil Nadu, India.

The occurrence of heavy metals (HMs) in water and soil sediments represents a serious environmental concern. This study revealed the presence and distribution of HMs in water and soil sediments of various places in Vellore District, Tamil Nadu, India. Twenty-one sites were selected along the study area, and inductively coupled plasma-optical emission spectrometry (ICP-OES) was used to analyze the concentration of the heavy metals. The dominance of various HMs in the soil sediment sample follows the order strontium (Sr) > Manganese (Mn) > Barium (Ba) > Zinc (Zn) > Nickel (Ni) and Sr > Mn > Zn > Boron (B) > , respectively. It was found that the concentration of HMs in water and soil sediments in Ambur market and Mottukollai area was significantly higher than the recommended limits. Thus, the results showed that the presence of HMs in water and soil sediments could be threatened pollution factors unsafe for irrigation, drinking, and other human activities.

Occurrence and Health Risks of Heavy Metals in Drinking Water of Self-Supplied Wells in Northern China.

Self-supplied wells, an important water resource in remote and scattered regions, are commonly deteriorated by environmental pollution and human activity. In this study, 156 self-supplied well-water samples were collected from remote and scattered areas of Inner Mongolia (NMG), Heilongjiang (HLJ), and the suburbs of Beijing (BJ) in Northern China. Twenty-four heavy metals were identified by using the inductively coupled plasma-mass spectrometry (ICP-MS) and inductively coupled plasma-optical emission spectrometry (ICP-OES), and the associated human health risks were assessed by using standards of the US Environmental Protection Agency (US EPA). The concentrations of four heavy metals (As, Fe, Mn, and Tl) in HLJ, one heavy metal (Tl) in BJ, and ten heavy metals (Al, As, B, Cr, Fe, Mn, Mo, Se, Tl, and Zn) in NMG exceeded the limits set by China or the World Health Organization (WHO). The total carcinogenic risk (TCR) and total non-carcinogenic risk (THQ) exceeding set limits mainly occurred in NMG, compared to HLJ and BJ. Moreover, As accounted for 97.87% and 60.06% of the TCR in HLJ and BJ, respectively, while Cr accounted for 70.83% of the TCR in NMG. The TCR caused by Cd in all three areas had a negligible hazard (<10−4). As accounted for 51.11%, 32.96%, and 40.88% of the THQ in HLJ, BJ, and NMG, respectively. According to the results of the principal component analysis, heavy metals in well water from HLJ and NMG mainly originated from mixed natural processes and anthropogenic sources, whereas, in BJ, most heavy metals probably originated from natural sources. In the future, long-term monitoring of heavy metals in water from self-supplied wells should be conducted for an extensive range of well-water sites, and well water with high As contamination should be monitored more and fully assessed before being used as a drinking-water source.

Occurrence and health implications of heavy metals in preschool children’s clothing manufactured in four Asian regions

Clothing may be a potential contributor to body metal burden in children. However, available information on heavy metals in children’s clothing is extremely limited and the associated health risks remain poorly understood. This study investigated the concentrations of Pb, Cd, Co, Zn, Cr, As, Cu and Ni in new preschool children’s clothing manufactured in four Asian regions. The children’s clothing had higher levels of Ni and Cr but lower levels of Pb and Cd in comparison to the concentrations reported in other textile products. The concentrations of Cd were higher in the black clothing than those in the white and color samples. The non-cotton samples contained higher Co concentrations. The Pb concentrations in the samples manufactured in China were significantly higher than those in the other three regions. We estimated the dermal exposure doses for these metals and calculated the associated risks. The results indicated that the health risks from exposure to these metals in the children’s clothing were acceptable. However, more research is required to investigate heavy metals and the associated risks in child clothing due to the increasing complexity of their materials and manufacturing processes.

Heavy metals in paired samples of hair and nails in China: occurrence, sources and health risk assessment.

The occurrence of heavy metals including chromium (Cr), nickel (Ni), copper (Cu), zinc (Zn), arsenic (As), cadmium (Cd) and lead (Pb) was investigated in paired samples of hair and nails collected from 121 volunteers in 16 cities, China. Results showed that the mean concentrations of Zn, Cu, As, Pb, Cr, Ni and Cd were 205, 18.0, 7.79, 6.18, 3.54, 2.02, 0.533μgg-1 in hair and 103, 8.09, 0.760, 7.27, 6.07, 8.81, 0.485μgg-1 in nails, respectively. The concentrations of Zn, Ni, Cr, Cd and Pb were positively correlated in paired samples of hair and nails, whereas a negative correlation was found for Cu and As between hair and nails. Higher concentrations of heavy metals were found in northern China than southern China. The multivariate analysis of variance revealed that dwelling environment was the dominant factor influencing the levels of Cd in hair (p < 0.05), while age was the dominant factor influencing the levels of Cr in nails (p < 0.05). Moreover, industrial pollution and smoking were also the important factors leading to the accumulation of heavy metals in human body. Principal component analysis (PCA) showed that industrial pollution and decoration material immersion were the main factors for the high concentrations of Cr and Ni in hair, accounting for 62.9% of the total variation; As in hair was dominantly related to groundwater pollution. The concentrations of heavy metals were within the recommended ranges in nails from this study. However, the mean levels of Cr, Ni and As in hair exceeded their recommended reference values, indicating potential health risks from heavy metals for residents in China.

Risk Assessment of Heavy Metals Occurrence in Two Wild Edible Oyster Mushrooms (Pleurotus spp.) Collected from Rajaji National Park.

This study aimed at assessing the concentration of six heavy metals (Cd, Cr, Cu, Fe, Mn, and Zn) in two wild edible oyster mushrooms (Pleurotus ostreatus and Pleurotus djamor) collected from Rajaji National Park in Haridwar, India. For this purpose, mushroom samples were collected from selected locations (forest, residential, tourist, industrial areas, and transportation activities) from June 2021 to July 2022 and subsequently analyzed for selected heavy metals using atomic absorption spectroscopy (AAS). Results showed that both Pleurotus spp. had significantly varying (p < 0.05) concentrations of heavy metals. However, P. ostreatus showed relatively higher concentration levels of these metals compared to P. djamor. The mean concentrations (mg/kg dry weight) of the Cd, Cr, Cu, Fe, Mn, and Zn in P. ostreatus and P. djamor were 0.10 and 0.08, 0.87 and 0.64, 16.19 and 14.77, 28.49 and 27.15, 9.93 and 8.73, and 18.15 and 15.76, respectively. As indicated by the multivariate analysis tools i.e., principal component analysis (PCA) and hierarchical cluster analysis (HCA), the locations near the residential, industrial, and transportation activities had higher concentration levels of heavy metals. Moreover, the health risk studies using the target hazard quotient (THQ < 1) showed no significant health risk as the consumption of both Pleurotus spp., except for at one location, had high-traffic activities. The findings of this study provide vital information about the occurrence of potentially toxic heavy metals in wild edible Pleurotus spp. in Rajaji National Park in Haridwar, India representing a safeguard for mushroom consumers.

Simultaneous removal of selenite and heavy metals from wastewater and their recovery as nanoparticles using an inverse fluidized bed bioreactor

Occurrence of selenium oxyanions and different heavy metals as co-pollutants in various waste streams is common from industries such as mining, coal burning, thermal power plants, petrochemical refinery, etc. Among the available technologies to treat such wastewater, biological removal using anaerobic microbes is one of the most advantageous. This study examined simultaneous removal and recovery of selenite and heavy metals using an inverse fluidized bed bioreactor (IFBR). The effect of commonly occurring heavy metals namely Zn, Cu and Cd on selenite removal was evaluated at 24 h hydraulic retention time (HRT). The maximum selenite removal of 93.9% was obtained in the absence of any heavy metals. The presence of heavy metals negatively impacted the selenite removal (45.8–85.3%), and the inhibitory effect due to Cu was the most significant among the three metals at 50 mg/L of influent concentration (47% lower). The heavy metal removal efficiency values were more than 70%, except in the case of Cd at 50 mg/L. The recovery values of selenium and heavy metals using the continuous bioreactor were in the range 45.1–73.9% and 59.2–69.8%, respectively, under different experimental conditions. Elemental selenium nanoparticles were formed inside the bioreactor due to selenite bioreduction and the nanoparticle size ranged from 50 to 300 nm. Furthermore, formation of small sized (<10 nm) metal selenide nanoparticles of the respective metals were detected during the bioreactor operation. Overall, this study clearly demonstrated the potential of the IFBR system for the removal of selenite and heavy metals from wastewater as well as their recovery as elemental selenium and metal selenide nanoparticles, respectively.

Occurrence of Heavy Metal and Antibiotic Resistant Bacteria in Soils from Selected Mechanic Workshops in Ibadan Metropolis, Nigeria

Aim: This study investigated the occurrence of antibiotic and heavy metal co - resistance in bacteria indigenous to mechanic workshops.&#x0D; Study Design: The study is an experimental study.&#x0D; Place: Samples were collected at mechanic workshop.&#x0D; Methodology: Soil samples were collected from three mechanic workshops and tested for the presence of heavy metals. Hydrocarbon-utilizing bacteria was also isolated from the soils using Bushnell Haas medium supplemented with 1% engine oil or petrol. Isolates obtained were subjected to antibiotic resistance test and those that showed extensive drug resistance to the tested antibiotics were further tested for heavy metal resistance. Selected isolates were then identified using 16S rRNA gene sequence.&#x0D; Results: The soil samples contained excessive amounts of Lead, Iron, Copper and Zinc, while the concentrations of Nickel, Cobalt, Cadmium and Chromium were within WHO permissible limit. A total of 10 hydrocarbon-degrading isolates were obtained from the soil samples, seven of which were gram negative and three were gram positive. Three of the isolates showed extensive drug resistance to 14 of the tested antibiotics. Three isolates were then subjected to heavy metal resistance test and all of them showed resistance to the tested heavy metals. They were identified and given ascension numbers as Stenotrophomonas maltophilia MW392903, Achromobacter xylosoxidans MW392904 and Pseudomonas aeruginosa MW392905.&#x0D; Conclusion: It was observed that heavy metal resistance and antibiotic resistance can be selected for simultaneously as organisms adapt ways to cope with man’s activities in the environment, and while traits like hydrocarbon utilization and heavy metal resistance make the organisms promising in bioremediation, the inadvertent possession of antibiotic resistance by these environmental isolates poses a challenge to the health sector.

Assessment of Occurrence, Ecological and Health Risk of Heavy Metals in Agricultural Soil in Hau Giang Province, Vietnam

Assessment of Occurrence, Ecological and Health Risk of Heavy Metals in Agricultural Soil in Hau Giang Province, Vietnam

Biosorption of heavy metals by microorganisms: Evaluation of different underlying mechanisms

Globally, ecotoxicologists, environmental biologists, biochemists, pathologists, and other experts are concerned about environmental contamination. Numerous pollutants, such as harmful heavy metals and emerging hazardous chemicals, are pervasive sources of water pollution. Water pollution and sustainable development have several eradication strategies proposed and used. Biosorption is a low-cost, easy-to-use, profitable, and efficient method of removing pollutants from water resources. Microorganisms are effective biosorbents, and their biosorption efficacy varies based on several aspects, such as ambient factors, sorbing materials, and metals to be removed. Microbial culture survival is also important. Biofilm agglomerates play an important function in metal uptake by extracellular polymeric molecules from water resources. This study investigates the occurrence of heavy metals, their removal by biosorption techniques, and the influence of variables such as those indicated above on biosorption performance. Ion exchange, complexation, precipitation, and physical adsorption are all components of biosorption. Between 20 and 35 °C is the optimal temperature range for biosorption efficiency from water resources. Utilizing living microorganisms that interact with the active functional groups found in the water contaminants might increase biosorption efficiency. This article discusses the negative impacts of microorganisms on living things and provides an outline of how they affect the elimination of heavy metals.

Evaluating Ecological Risk Associated with Heavy Metals in Agricultural Soil in Dong Thap Province, Vietnam

Heavy metal pollution in soil has received more attention in recent years because of an increase in human activities and its potential effects on ecology and human health. This study assessed the occurrence of heavy metals (As, Pb, Cu, Zn, and Cd) in different cultivated land and their ecological risk in Dong Thap Province, Vietnam. Seventeen samples collected in paddy, vegetable, perennials, and ornamental soils were measured for heavy metal concentrations and soil structure. The data were analyzed using Pearson correlation, principal component analysis (PCA), cluster analysis (CA), Nemerow pollution index (PIN), geoaccumulation index (Igeo), pollution load index (PLI), and potential ecological risk index (RI). The results revealed that the soil structure was clay loam and silt clay loam. Heavy metal concentrations were within the national limits with the order of Zn&gt;Cu&gt;Pb&gt;As&gt;Cd. Pearson correlation and PCA indicated that heavy metals were strongly correlated, and agriculture and soil formation were responsible for their presence in soil. The sampling sites were divided into four groups using CA, in which paddy and crop soils had the highest content of heavy metals. Based on PIN values (0.82-2.92), the heavy metal pollution ranged from warning to moderate level. As had the highest accumulation potential in the soil, with the Igeo values ranging from 0.12-2.05. The risk of heavy metal pollution in agricultural soil to ecology was low to moderate. Despite that, it is recommended to annually monitor the occurrence of heavy metals in agricultural soils to have proper solutions to protect public health.

Occurrence and Uptake of Heavy Metals in Soil and Plant (Tomato) Associated with Crude Oil Contamination

The general increase of heavy metal content in the soil has been largely caused by crude oil spillage. This study investigates the possibility of tomato (Lycopersicon esculentum Miller) to sorb heavy metals present in crude oil. Crude oil of 0 mL (control), 75 and 150 mL were mixed thoroughly with 15 kg of loamy soil (dry weight) in perforated plastic buckets, as the experimental pots and left for 4 days before transplanting tomato seedlings. After 12 weeks of transplanting, heavy metals analysis was carried out on plant’s fruits, leaves, stems and roots. Physicochemical analyses show that control soil had the lowest organic carbon (3.07 %) while 150 mL had the highest mean organic carbon content (8.24 %). The silt, clay and sand constituents were not significantly different (p &gt; 0.05) in both treated and untreated soil. The control had the least pH value (6.1) while the lead (Pb) content in soil was highest in 150 mL (0.33 mg/kg) but was not significantly different (p &gt; 0.05) from control (0.26 ) and 75 mL (0.30 mg/kg). Lead (Pb) and Cadmium (Cd) were not detected in leaves and fruits. However, bioaccumulation factor (BAF) of Cd and Ni in stem were greater than 1. Although, the concentrations of these heavy metals falls below toxic levels, its consumption could lead to adverse health effects in both man and animals through bioaccumulation or biomagnification.&#x0D; HIGHLIGHTS&#x0D; &#x0D; Countries with poor hydrocarbon pollution regulation are more challenging with oil spills, either through accidental discharges or indiscriminate disposal of hydrocarbon waste&#x0D; Plants essentially need some metals such as iron, copper among others, for their growth and other metabolic activities. However, at excess of specific limits, these metals adversely affect plant growth&#x0D; In this study, bioaccumulation factors (BAF) of Cd and Ni in the stem were greater than 1, this shows that the tomato plant is a hyperaccumulator of Cd and Ni from the soil&#x0D; &#x0D; GRAPHICAL ABSTRACT