Nucleophilic Addition Research Articles

(Benz)imidazo[1,2-a]quinolinium Salts: Access via Unprecedented Regiospecific non-AAIPEX Strategy and Study of Their Tunable Properties.

An unprecedented non-AAIPEX protocol has been developed to access diverse monosubstituted cationic polycyclic heteroaromatic compounds (cPHACs) from the readily available azolium salts and phenacyl bromides via Ru(II)-catalyzed tandem annulation cum aromatization. This atom-economic protocol executes a range of intermediate steps e. g. double C-H activation, nucleophilic addition, annulation, and dehydration cum aromatization in one-pot manner under the generation of H2O as the sole byproduct. Moreover, the systematic tunability of photo-physical and electrochemical properties of these new class of cPHACs can be authenticated from the DFT calculated frontier molecular orbital energies that might be beneficial for their potential applications in optoelectronics and DNA intercalation.

Solvent-Free Synthesis of α-Cyanophosphonates from β-Nitro­styrenes by Using a Deep-Eutectic Solvent Catalyst

Abstractα-Cyanophosphonates, which are useful reagents for the Horner–Wittig reaction, were synthesized under solvent-free conditions by using a choline chloride–zinc chloride deep-eutectic solvent (DES) as a catalyst. This is only the second report on the synthesis of these compounds. In the previous report, diethyl trimethylsilyl phosphite was used as a reagent and TiCl4 as a catalyst, whereas in this study, both the reagent (triphenylphosphine) and the catalyst (choline chloride–zinc chloride DES) are cheaper, more readily available, and less harmful than those used in the previous work. Moreover, the process involves an interesting cascade reaction between a β-nitrostyrene and two equivalents of triphenyl phosphite, leading to the desired product by a new synthetic route. The products can be used in the pharmaceutical and agricultural industries, in addition to their synthetic applications in the preparation of α,β-unsaturated nitriles. The reactions were completed on using 20 mol% of DES at 80 °C in six hours. Ten different β-nitrostyrenes were synthesized in yields of 55–87% after purification. β-Nitrostyrenes containing electron-donating groups showed higher yields. The reaction failed when aliphatic or heteroaromatic nitroalkenes or β-nitrostyrenes with electron-withdrawing substituents were employed. Finally, three plausible mechanistic routes are proposed for the reaction, starting with the nucleophilic addition of triphenyl phosphite to the carbon, nitrogen, or oxygen atom in the α-position.

Chemoselectivity of the CuAAC/Ring Cleavage/Cyclization Reaction between Enaminones and α-Acylketenimine.

Ketenimines represent an important class of reactive species, useful synthetic intermediates, and synthons. However, in general, ketenimines preferentially undergoes nucleophilic addition reactions with hydroxyl and amino groups, and carbon functional groups remain a less studied subset of such systems. Herein, we develop a straightforward syntheses of pyridin-4(1H)-imines that is achieved by cyclization of a reacting enaminone unit with α-acylketenimine which is generated from the reactions of sulfonyl azides and terminal ynones in situ (CuAAC/Ring cleavage reaction). The cascade process preferentially starts with the nucleophilic α-C of the enaminone unit instead of an amino group, attacking the electron-deficient central carbon of ketenimine, and the chemoselectivity unconventional products pyridin-4(1H)-imines were formed by intramolecular cyclization.

Mechanochemical synthesis of organoselenium compounds

We disclose herein a strategy for the rapid synthesis of versatile organoselenium compounds under mild conditions. In this work, magnesium-based selenium nucleophiles are formed in situ from easily available organic halides, magnesium metal, and elemental selenium via mechanical stimulation. This process occurs under liquid-assisted grinding (LAG) conditions, requires no complicated pre-activation procedures, and operates broadly across a diverse range of aryl, heteroaryl, and alkyl substrates. In this work, symmetrical diselenides are efficiently obtained after work-up in the air, while one-pot nucleophilic addition reactions with various electrophiles allow the comprehensive synthesis of unsymmetrical monoselenides with high functional group tolerance. Notably, the method is applied to regioselective selenylation reactions of diiodoarenes and polyaromatic aryl halides that are difficult to operate via solution approaches. Besides selenium, elemental sulfur and tellurium are also competent in this process, which showcases the potential of the methodology for the facile synthesis of organochalcogen compounds.

O-H Insertion of Hydrogenphosphate Derivatives and α-Diazo Compounds.

An efficient O-H insertion of hydrogenphosphate derivatives and α-diazo compounds has been developed to construct α-phosphoryloxy scaffolds. Diverse α-phosphoryloxy skeletons could be obtained under mild and catalyst-free conditions in good yields. The control experiments suggest a protonation and nucleophilic addition process of α-diazo compounds via a diazonium ion pair for this transformation.

Bioinspired Total Synthesis of Bipolarolides A and B

AbstractWe have achieved the first total synthesis of bipolarolides A and B, which possess an intriguing and complex 5/6/6/6/5 caged pentacyclic skeleton with seven contiguous stereocenters. The synthesis features a lithium‐halogen exchange/intermolecular nucleophilic addition to link two enantioenriched fragments, two ring‐closing metathesis reactions to assemble the five‐ and eight‐membered rings, and a bioinspired Prins reaction/ether formation cascade cyclization to construct the 5/6/6/6/5 caged skeleton.

Acetamide Electrosynthesis from CO2 and Nitrite in Water.

Renewable electricity driven electrocatalytic CO2 reduction reaction (CO2 RR) is a promising solution to carbon neutralization, which mainly generate simple carbon products. It is of great importance to produce more valuable C-N chemicals from CO2 and nitrogen species. However, it is challenging to co-reduce CO2 and NO3 - /NO2 - to generate aldoxime an important intermediate in the electrocatalytic C-N coupling process. Herein, we report the successful electrochemical conversion of CO2 and NO2 - to acetamide for the first time over copper catalysts under alkaline condition through a gas diffusion electrode. Operando spectroelectrochemical characterizations and DFT calculations, suggest acetaldehyde and hydroxylamine identified as key intermediates undergo a nucleophilic addition reaction to produce acetaldoxime, which is then dehydrated to acetonitrile and followed by hydrolysis to give acetamide under highly local alkaline environment and electric field. Moreover, the above mechanism was successfully extended to the formation of phenylacetamide. This study provides a new strategy to synthesize highly valued amides from CO2 and wastewater.

Bioinspired Total Synthesis of Bipolarolides A and B.

We have achieved the first total synthesis of bipolarolides A and B, which possess an intriguing and complex 5/6/6/6/5 caged pentacyclic skeleton with seven contiguous stereocenters. The synthesis features a lithium-halogen exchange/intermolecular nucleophilic addition to link two enantioenriched fragments, two ring-closing metathesis reactions to assemble the five- and eight-membered rings, and a bioinspired Prins reaction/ether formation cascade cyclization to construct the 5/6/6/6/5 caged skeleton.

Acetamide Electrosynthesis from CO2 and Nitrite in Water

AbstractRenewable electricity driven electrocatalytic CO2 reduction reaction (CO2RR) is a promising solution to carbon neutralization, which mainly generate simple carbon products. It is of great importance to produce more valuable C−N chemicals from CO2 and nitrogen species. However, it is challenging to co‐reduce CO2 and NO3−/NO2− to generate aldoxime an important intermediate in the electrocatalytic C−N coupling process. Herein, we report the successful electrochemical conversion of CO2 and NO2− to acetamide for the first time over copper catalysts under alkaline condition through a gas diffusion electrode. Operando spectroelectrochemical characterizations and DFT calculations, suggest acetaldehyde and hydroxylamine identified as key intermediates undergo a nucleophilic addition reaction to produce acetaldoxime, which is then dehydrated to acetonitrile and followed by hydrolysis to give acetamide under highly local alkaline environment and electric field. Moreover, the above mechanism was successfully extended to the formation of phenylacetamide. This study provides a new strategy to synthesize highly valued amides from CO2 and wastewater.

Microwave-assisted synthesis of crosslinked ureido chitosan for hemostatic applications

In this study, we present a facile method for introducing hydrophilic ureido groups (NH2-CO-NH-) into chitosan using a microwave-assisted reaction with molten urea, with the aim of enhancing chitosan's interaction with blood components for improved hemostasis. The formation of the ureido groups through nucleophilic addition reaction between the amine groups in chitosan and in situ generated isocyanic acid was confirmed by FTIR, CP/TOSS 13C NMR, and CP/MAS 15N NMR spectroscopic techniques. However, in stark contrast to the glucans, the said modification introduced extensive crosslinking in chitosan. Spectroscopic studies identified these crosslinks as carbamate bridges (-NH-COO-), which were likely formed by the reaction between the ureido groups and hydroxyl groups of adjacent chains through an isocyanate intermediate. These carbamate bridges improved ureido chitosan's environmental stability, making it particularly resistant to changes in pH and temperature. In comparison to chitosan, the crosslinked ureido chitosan synthesized here exhibited good biocompatibility and cell adhesion, rapidly arrested the bleeding in a punctured artery with minimal hemolysis, and induced early activation and aggregation of platelets. These properties render it an invaluable material for applications in hemostasis, particularly in scenarios that necessitate stability against pH variations and degradation.

Visible-Light-Driven Multicomponent Diamination and Oxyamination of Alkene.

Herein, we describe an effective method for the synthesis of 2-alkoxyamides and 1,2-diamines through visible-light-mediated difunctionalization of alkenes. N-Aminopyridinium salts were employed as appropriate precursors to generate key amidyl radical intermediates via a photoinduced single-electron transfer (SET) process. The amidyl radicals would react with alkenes, followed by oxidation and nucleophilic addition. Excellent functional group tolerance and good yields demonstrate the synthetic potential of this transformation.

Step‐growth Polymerization of Aziridines with Elemental Sulfur: Easy Access to Linear Polysulfides and Their Use as Recyclable Adhesives

AbstractThe bulk radical polymerization of bis(aziridine) with molten elemental sulfur resulted in brittle, cross‐linked polymers. However, when the bis(aziridine) was treated with elemental sulfur in the presence of an organobase, the ring‐opening reaction of aziridine with oligosulfide anions occurred, leading to the formation of linear polymers by step‐growth polymerization. These newly synthesized polymers possess repeating units containing a sulfonamide or amide functional moiety and oligosulfide bonds with an average sulfur segment of about two. A small molecular model reaction confirmed the nucleophilic addition reaction of elemental sulfur to aziridine. It was verified that S−S dynamic bond exchange takes place in the presence of an organic base within the linear chains. The mixture of the synthesized polysulfides with pyridine exhibits exceptional adhesive properties when applied to steel, and aluminum substrates. Notably, these prepared adhesives displayed good reusability due to the dynamic S−S exchange and complete recyclability due to their solution processability. This elemental sulfur‐involved polymerization approach represents an innovative method for the synthesis of advanced sulfur‐containing polymers, demonstrating the potential for various applications in adhesives and beyond.

Step-growth Polymerization of Aziridines with Elemental Sulfur: Easy Access to Linear Polysulfides and Their Use as Recyclable Adhesives.

The bulk radical polymerization of bis(aziridine) with molten elemental sulfur resulted in brittle, cross-linked polymers. However, when the bis(aziridine) was treated with elemental sulfur in the presence of an organobase, the ring-opening reaction of aziridine with oligosulfide anions occurred, leading to the formation of linear polymers by step-growth polymerization. These newly synthesized polymers possess repeating units containing a sulfonamide or amide functional moiety and oligosulfide bonds with an average sulfur segment of about two. A small molecular model reaction confirmed the nucleophilic addition reaction of elemental sulfur to aziridine. It was verified that S-S dynamic bond exchange takes place in the presence of an organic base within the linear chains. The mixture of the synthesized polysulfides with pyridine exhibits exceptional adhesive properties when applied to steel, and aluminum substrates. Notably, these prepared adhesives displayed good reusability due to the dynamic S-S exchange and complete recyclability due to their solution processability. This elemental sulfur-involved polymerization approach represents an innovative method for the synthesis of advanced sulfur-containing polymers, demonstrating the potential for various applications in adhesives and beyond.

Oxidative Dearomatization of Pyridines.

Dearomatization of pyridines is a well-established synthetic approach to access piperidines. Although remarkably powerful, existing dearomatization processes have been limited to the hydrogenation or addition of carbon-based nucleophiles to activated pyridiniums. Here, we show that arenophile-mediated dearomatizations can be applied to pyridines to directly introduce heteroatom functionalities without prior substrate activation. The arenophile platform in combination with olefin oxidation chemistry provides access to dihydropyridine cis-diols and epoxides. These previously elusive compounds are now readily accessible and can be used for the downstream preparation of diversely functionalized piperidines.

Branched polymer grafted loose nanofiltration membrane with high surface potential for dye desalination

Herein, a thin and high-potential loose nanofiltration (LNF) membrane was fabricated by one-step cross-linking with branched polyethyleneimine (PEI) using the reactive sites on the styrene maleic anhydride/chlorinated polyvinyl chloride membrane surface to for alkylation and nucleophilic addition reactions, respectively. As the molecular weight of branched PEI increased, the thickness of LNF membranes decreased and their pore sizes and surface potential increased (i. e., potential value of LNF membrane above 59 mV at pH = 7). Density functional theory calculations were used to understand the separation mechanism of LNF membranes. The rejection mechanisms of these membranes for Brilliant Blue R250, Methyl blue, Congo red, and Acid fuchsin were based on size-sieving, with rejection for all >95 %. However, the rejection mechanisms of Bromocresol green and Bromothymol blue were affected by the size-electrostatic synergy. Pleasingly, the NaCl rejection was <10 %. Furthermore, the 22 k-PEI-modified LNF membrane could not only effectively separate dye/NaCl under high pressure and high salinity but also maintain long-term stable desalination performance. Notably, the assessment of dye rejection in LNF membranes revealed that it is not solely based on the molecular weight of dye but is also related to the geometric shape of the organic substance.

Efficient degradation of sulfamethoxazole by a peroxymonosulfate system activated by g-C3N4@polyethylene glycol-derived carbon-nitrogen nanosheets: The key roles of N and O groups

A simultaneous thermal polymerization reaction was performed with graphitic carbon nitride and polyethylene glycol to synthesize a novel metal-free carbon–nitrogen (CN) material, and the prepared material was applied to activate a peroxymonosulfate (PMS) system. Sulfamethoxazole (SMX) removal by CN7/PMS reached 93.75 % in 10 min, which was 39.86 times higher than that achieved by PMS systems alone. Material characterization showed that the pyrolysis temperature could be adjusted to modulate the N atom and functional group contents. As determined by experimental validation and DFT calculations, C = O/C-N, graphitic N and defects were the main active sites. This finding indicates that CN7 activated PMS to produce hydroxyl radicals (•OH), sulfate radicals (SO4•-) and singlet oxygen (1O2) through electrostatic interactions, nucleophilic addition, electron transfer and other pathways. Moreover, 1O2 was dominant, with a 91.58 % contribution. In addition, the materials maintained high catalytic stability in different water matrices and multiple cycling experiments. The present study innovatively illustrated the mechanism by which nitrogen-doped carbon materials activated PMS, providing a new insight into the development of highly active metal-free catalysts applied in PMS systems.

Synthesis of β-O-4 linked model oligolignol with a selectively deuterium-labelled methoxy group at the phenolic terminal unit

Abstract A lignin model oligomer with only β-O-4 linkages and a selectively deuterium-labelled methoxy group at the phenolic terminal units was synthesised to clarify the behaviour of the phenolic end of oligolignols. First, t-butoxycarbonylmethyl vanillin was synthesised and oligomerised by nucleophilic addition, a known method. The terminal of the oligomers was then subjected to nucleophilic addition to [3-OCD3]benzyl vanillin to achieve selective labelling of the terminal units. A deuterium-labelled lignin model oligomer (D-LM) was obtained through debenzylation and subsequent reduction. The results of thioacidolysis after methylation revealed that the degree of polymerisation was about five, and the deuterium-labelled phenylpropane unit was located only at the phenolic terminal moiety.

Contribution of Hydroxycinnamic Acids to Color Formation in Nonenzymatic Browning Reactions with Key Maillard Reaction Intermediates.

The Maillard reaction is a vital part of food processing, involving a vast number of complex reaction pathways, resulting in high-molecular-weight colorants. So far, studies have been focused on the conversion of carbohydrates and amino compounds, but the literature elaborating the contribution of phenolic compounds to the formation of the colored end-products is still rare. The aim of this study was to characterize early reactions, underlying the formation of phenol-containing melanoidins. For this purpose, binary model systems of the prominent phenolic compounds caffeic acid and ferulic acid combined with α-dicarbonyl compounds typically formed in the Maillard reaction such as glyoxal, methylglyoxal, and diacetyl were analyzed after heat treatment. High-resolution mass spectrometry revealed that decarboxylation, aromatic electrophilic substitution, and nucleophilic addition are important reaction steps that lead to colored heterogeneous oligomers. Polymerization was favored for phenolic compounds with a high electron density in the aromatic system and for α-dicarbonyl compounds carrying aldehyde functions.

Enantioselective Construction of Eight‐Membered N‐Heterocycles from Simple 1,3‐Dienes via Pd(0) Lewis Base Catalysis

AbstractWe report herein an unprecedented enantioselective (4+4) cycloaddition of simple 1,3‐dienes with azadienes for the construction of fused eight‐membered N‐heterocycles. In this transformation, the π‐Lewis basic Pd(0) catalyst achieves activation of 1,3‐dienes to induce nucleophilic addition to azadienes followed by ring cyclization via a selective terminal allylic substitution. Furthermore, highly efficient and diastereoselective derivatizations of the eight‐membered rings provide a facile access to diverse enantiopure fused tetra‐ to hexacyclic compounds with potential application in medicinal chemistry.

Enantioselective Construction of Eight-Membered N-Heterocycles from Simple 1,3-Dienes via Pd(0) Lewis Base Catalysis.

We report herein an unprecedented enantioselective (4+4) cycloaddition of simple 1,3-dienes with azadienes for the construction of fused eight-membered N-heterocycles. In this transformation, the π-Lewis basic Pd(0) catalyst achieves activation of 1,3-dienes to induce nucleophilic addition to azadienes followed by ring cyclization via a selective terminal allylic substitution. Furthermore, highly efficient and diastereoselective derivatizations of the eight-membered rings provide a facile access to diverse enantiopure fused tetra- to hexacyclic compounds with potential application in medicinal chemistry.