Amide NH Research Articles

Total synthesis and evaluation of [Psi[CH2NH]Tpg4]vancomycin aglycon: reengineering vancomycin for dual D-Ala-D-Ala and D-Ala-D-Lac binding.

An effective synthesis of [Psi[CH(2)NH]Tpg(4)]vancomycin aglycon (5) is detailed in which the residue 4 amide carbonyl of vancomycin aglycon has been replaced with a methylene. This removal of a single atom was conducted to enhance binding to D-Ala-D-Lac, countering resistance endowed to bacteria that remodel their D-Ala-D-Ala peptidoglycan cell wall precursor by a similar single atom change (ester O for amide NH). Key elements of the approach include a synthesis of the modified vancomycin ABCD ring system featuring a reductive amination coupling of residues 4 and 5 for installation of the deep-seated amide modification, the first of two diaryl ether closures for formation of the modified CD ring system (76%, 2.5-3:1 kinetic atropodiastereoselectivity), a Suzuki coupling for installation of the hindered AB biaryl bond (90%) on which the atropisomer stereochemistry could be thermally adjusted, and a macrolactamization closure of the AB ring system (70%). Subsequent DE ring system introduction enlisted a room-temperature aromatic nucleophilic substitution reaction for formation of the remaining diaryl ether (86%, 6-7:1 kinetic atropodiastereoselectivity), completing the carbon skeleton of 5. Consistent with expectations and relative to the vancomycin aglycon, 5 exhibited a 40-fold increase in affinity for D-Ala-D-Lac (K(a) = 5.2 x 10(3) M(-1)) and a 35-fold reduction in affinity for D-Ala-D-Ala (K(a) = 4.8 x 10(3) M(-1)), providing a glycopeptide analogue with balanced, dual binding characteristics. Beautifully, 5 exhibited antimicrobial activity (MIC = 31 microg/mL) against a VanA-resistant organism that remodels its D-Ala-D-Ala cell wall precursor to d-Ala-d-Lac upon glycopeptide antibiotic challenge, displaying a potency that reflects these binding characteristics.

Thioamide Pincer Ligands with Charge Versatility

This paper reports the synthesis and characterization of three complexes, two palladium and one platinum, with 2,6-bis-thioamido-phenyl and 2,6-bis-thioamido-pyridine ligands. The ligands show internal charge versatility by losing protons from a phenyl CH (I) or from amide NH's (II and III). The complexes were also examined as Heck catalysts, and the palladacycle, I, was found to be more effective compared to the others. The crystal structures of the complexes are also reported.

Photoinduced switching of intramolecular hydrogen bond between amide NH and carboxyl oxygen

In this study, we synthesized two novel carboxylic acid and carboxylate compounds, both of which had an amide group linked with an azomethine moiety to introduce photoinduced switching of the intramolecular NH...O hydrogen bond. We suggest that the cis-carboxylate compound forms a stronger intramolecular NH...O hydrogen bond than the cis-carboxylic acid compound.

Synthesis and Structure of Macrolactams of 3α‐Aminodeoxycholanic Acid

AbstractThe macrolactams cyclo(3α‐aminodeoxycholic amide)2 (1) and cyclo(3α‐aminodeoxycholic amide)3 (2) were prepared in high yields (1: 32 %; 2: 41 %) from the pentafluorophenyl esters of the linear precursors. The solid‐state structures of both macrocycles were determined by X‐ray diffraction. Compound 1 forms a cleft of C2 symmetry which holds two methanol and two water molecules fixed by hydrogen bonds. The crystals of compound 2 contain two slightly different macrolactam rings of 7–8 Å diameter. The polar α‐surface of the deoxycholanic parts and the amide NH groups are oriented into the center of the rings. The cavity formed by the ring system and the void volume between the macrocycles is filled by disordered solvent molecules. (© Wiley‐VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2006)

Homochiral and Heterochiral Coordination Polymers and Networks of Silver(I)

The self-assembly of racemic and enantiopure binaphthylbis(amidopyridyl) ligands 1,1'-C(20)H(12){NHC(O)-4-C(5)H(4)N}(2), 1, and 1,1'-C(20)H(12){NHC(O)-3-C(5)H(4)N}(2), 2, with silver(I) salts (AgX; X = CF(3)CO(2), CF(3)SO(3), NO(3)) to form extended metal-containing arrays is described. It is shown that the self-assembly with racemic ligands can lead to homochiral or heterochiral polymers, through self-recognition or self-discrimination of the ligand units. The primary polymeric materials adopt helical conformations (secondary structure), and they undergo further self-assembly to form sheets or networks (tertiary structure). These secondary and tertiary structures are controlled through secondary bonding interactions between pairs of silver(I) centers, between silver cations and counteranions, or through hydrogen bonding involving amide NH groups. The self-assembly of the enantiopure ligand R-1 with silver trifluoroacetate gave a remarkable three-dimensional chiral, knitted network composed of polymer chains in four different supramolecular isomeric forms.

Effects of Co-operative Ligand Binding on Protein Amide NH Hydrogen Exchange

Amide protection factors have been determined from NMR measurements of hydrogen/deuterium amide NH exchange rates measured on assigned signals from Lactobacillus casei apo-DHFR and its binary and ternary complexes with trimethoprim (TMP), folinic acid and coenzymes (NADPH/NADP(+)). The substantial sizes of the residue-specific DeltaH and TDeltaS values for the opening/closing events in NH exchange for most of the measurable residues in apo-DHFR indicate that sub-global or global rather than local exchange mechanisms are usually involved. The amide groups of residues in helices and sheets are those most protected in apo-DHFR and its complexes, and the protection factors are generally related to the tightness of ligand binding. The effects of ligand binding that lead to changes in amide protection are not localised to specific binding sites but are spread throughout the structure via a network of intramolecular interactions. Although the increase in protein stability in the DHFR.TMP.NADPH complex involves increased ordering in the protein structure (requiring TDeltaS energy) this is recovered, to a large extent, by the stronger binding (enthalpic DeltaH) interactions made possible by the reduced motion in the protein. The ligand-induced protection effects in the ternary complexes DHFR.TMP.NADPH (large positive binding co-operativity) and DHFR.folinic acid.NADPH (large negative binding co-operativity) mirror the co-operative effects seen in the ligand binding. For the DHFR.TMP.NADPH complex, the ligand-induced protection factors result in DeltaDeltaG(o) values for many residues being larger than the DeltaDeltaG(o) values in the corresponding binary complexes. In contrast, for DHFR.folinic acid.NADPH, the DeltaDeltaG(o) values are generally smaller than many of those in the corresponding binary complexes. The results indicate that changes in protein conformational flexibility on formation of the ligand complex play an important role in determining the co-operativity in the ligand binding.

The environment of amide groups in protein–ligand complexes: H-bonds and beyond

A comprehensive structural analysis of interactions involving amide NH and C=O groups in protein-ligand complexes has been performed based on 3,275 published crystal structures (resolution < or =2.5 A). Most of the amide C=O and NH groups at the protein-ligand interface are highly buried within the binding site and involved in H-bonds with corresponding counter-groups. Small percentages of C=O and NH groups are solvated or embedded in hydrophobic environments. In particular, C=O groups show a higher propensity to be solvated or embedded in a hydrophobic environment than NH groups do. A small percentage of carbonyl groups is involved in weak hydrogen bonds with CH. Cases of dipolar interactions, involving carbonyl oxygen and electrophilic carbon atoms, such as amide, amidinium, guanidium groups, are also identified. A higher percentage of NH are in contact with aromatic carbons, interacting either through hydrogen bonds (preferably with the NH group pointing towards a ring carbon atom) or through stacking between amide plane and ring plane. Comprehensive studies such as the present one are thought to be important for future improvements in the molecular design area, in particular for the development of new scoring functions. [Figure: see text].

Cation Dependence of Chloride Ion Complexation by Open-Chained Receptor Molecules in Chloroform Solution

Seventeen peptides, most having the sequence GGGPGGG, but differing in the C- and N-terminal ends, have been studied as anion-complexing agents. These relatively simple, open-chained peptide systems interact with both chloride and the associated cation. Changes in the N- and C-terminal side chains appear to make little difference in the efficacy of binding. NMR studies suggest that the primary interactions involve amide NH contacts with the chloride anion, and CD spectral analyses suggest a concomitant conformational change upon binding. Changes in binding constants, which are expected in different solvents, also suggest selective solvent interactions with the unbound host that helps to preorganize the open-chained peptide system. Significant differences are apparent in complexation strengths when the heptapeptide chain is shortened or lengthened or when the relative position of proline within the heptapeptide is varied.

13C NMR investigation of the reaction in water of UF resins with blocked emulsifiable isocyanates

AbstractA solid state 13C NMR study of hardened networks obtained by the reaction of blocked and nonblocked isocyanates (pMDI) with urea‐formaldehyde (UF) resins in water showed different results according to the temperature of the reaction. At high temperature, in water, both a nonblocked or an emulsifiable, blocked isocyanate, appear to crosslink with UF resins through the formation both of traditional methylene bridges connecting urea to urea and of urethane bridges. The latter have been confirmed by 13C NMR to form in water by reaction of the isocyanate NCO group with the hydroxymethyl groups of the UF resin. At ambient temperature, UF/pMDI resins where the pMDI is a emulsifiable blocked isocyanate, do not appear to form urethanes to any great extent but rather to crosslink through the usual UF resin urea to urea methylene bridges. Even in this case, when urethane bridges appear to be absent, evidence of crosslinking in water through reaction of the isocyanate with the NH2 and NH amide of the UF resin has not been observed. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 589–596, 2006

Fluorescence Ratiometry of Monomer/Excimer Emissions in a Space-Through PET System

[Reaction: see text]. Fluorogenic calix[4]arenes (1 and 2) bearing a pendent ethyleneamine on their triazacrown rings, respectively, were synthesized in the cone conformation. Compared with 4, free 1 and 2 display a relatively weak emission, reflecting that a PET process from the pendent amine group (-CH2CH2NH2) to the fluorogenic pyrenes is mainly operated. Addition of various metal ions or anions to the solution of 1 or 2 reduces the PET because the pendent alkylamine takes part in the complexation, causing their fluorescence spectra to be changed. When Pb2+, a quenching metal ion, is added to 1 or 2, their pyrene monomer emission is enhanced with their excimer emission quenched, which is due to conformational changes of the facing carbonyl groups as well as to the participation of the ethyleneamine into the three-dimensional Pb2+ ion encapsulation. In contrast, upon addition of alkali metal ions to the 1 and 2, both monomer and excimer emissions are observed to increase, which is attributable to the CHEF effect and the retained conformations. For anion sensing, both 1 and 2 show a high selectivity for F- ions over other anions tested. When the F- ion is bound to 1 or 2 by hydrogen bonding between the amide NH of the triazacrown ring and F-, both their monomer and excimer emissions are weakened due to PET from the bound F- to the pyrene units.

Peptoads, a Group of Amphiphilic Long-Chain Triamides

Eleven triamides bearing long alkyl chains have been synthesized to produce a new class of amphiphilic compounds (dubbed "peptoad"). The properties of these molecules have been investigated by X-ray analysis, solubility studies, light and electron microscopy, surface tensiometry, light scattering, drug dissolution, and molecular dynamics. In the solid state, the peptoads assemble in layers with both intra- and interlayer hydrogen bonding coupled to side-by-side proximity of the hydrocarbon chains. Peptoads with a terminal primary amide and a total of three amide NH sites are water-insoluble owing presumably to attractive forces in the solid state. However, peptoads with terminal -CONMe(2) groups and two internal amide NH sites are water-soluble at room temperature. This solubility is critically dependent upon the chain length. For example, a C(7)-chained peptoad is 1600 times more soluble than its C(9) analogue. High concentrations (6-8 M) of C(7) peptoads in water are clear and do not gel. Light microscopy shows long fibers floating in an isotropic liquid. Water-soluble peptoads are highly surface-active, lowering water's surface tension as effectively as a soap with a much longer chain. Surface tension plots show a "critical aggregation concentration", but it is believed from light scattering and molecular dynamics that the aggregates grow continuously as more peptoad is added to the water. In answer to the inevitable (but valid) question, "What possible good are they?", it can be pointed out that a peptoad solubilizes a water-insoluble drug, paclitaxel (Taxol), as efficiently as does Cremophor EL, a commercial excipient widely used with paclitaxel and other nonpolar drugs. Peptoads, being small molecules and consisting of hydrolyzable amide groups, are likely biodegradable and less prone to the hypersensitivity and neurotoxicity found with Cremophor EL.

Escherichia coli Cyclopropane Fatty Acid Synthase: Is a Bound Bicarbonate Ion the Active-Site Base?

Cyclopropane synthases catalyze the cyclopropanation of unsaturated fatty acid using S-adenosyl-L-methionine as the methylene donor. The crystal structure of three cyclopropane synthases from Mycobacterium tuberculosis showed a bicarbonate ion bound in the active site that was proposed to act as a general base in the reaction mechanism [Huang, C., Smith, V., Glickman, M. S., Jacobs, W. R., and Sacchettini, J. C. (2002) J. Biol. Chem. 277, 11559-11569]. Because the in vitro activity of M. tuberculosis cyclopropane synthases has not yet been reported and because the ligands of the bicarbonate ion are all strictly conserved in cyclopropane synthases, we used the closely related Escherichia coli cyclopropane fatty acid synthase for this study. The putative ligands that share a hydrogen bond with the bicarbonate through their side chains were mutated. H266A, Y317F, E239A, and E239Q mutants were thus constructed and purified, and their catalytic efficiencies were 5.3, 0.7, 0.2, and <0.02%, respectively. C139 that is bound to the bicarbonate by its NH amide had already been mutated to serine in a previous work, and this mutant retains 31% of the activity of the wild-type enzyme. Kinetic analyses and binding studies using spectrofluorimetry showed that these mutations affected the catalytic constant rather than the binding of the substrates. While addition of free bicarbonate had almost no effect on the wild-type enzyme activity, all mutants, with the exception of E239A and E239Q, were rescued by the addition of free bicarbonate. The catalytic efficiencies of the rescued mutants were 85, 16, and 14% for C139S, H266A, and Y317F, respectively. This effect was specific to bicarbonate. The kinetic parameters of the rescued mutants were determined, and it is shown that the rescuing effect is due to an increase in kcat. These data are interpreted by assuming that the E. coli cyclopropane fatty acid synthase specifically binds a bicarbonate ion that is involved in catalysis, as proposed for the M. tuberculosis enzymes, and that mutation of the bicarbonate ligands decreases the affinity for that ion. However, because the E239Q mutation could not be rescued, we propose that E239 forms a catalytic dyad with the bicarbonate to perform the proton abstraction necessary in the chemical pathway to the cyclopropane ring.

Tris(2-N-methylaminocarbonyl-3-hydroxy-1,6-dimethyl-1,4-dihydro-4-pyridinonato)iron(III) dimethylformamide disolvate

In the crystal structure of the title compound, Fe(C9H11N2O3)3·2C3H7NO, the FeIII ion is six-coordinate with a distorted octa­hedral configuration consisting of six donor O atoms from three bidentate ligands. Two of the amide NH groups are involved in intra­molecular N—H⋯Op (p = phenolic) hydrogen bonds, while the third is involved in forming centrosymmetric dimers via inter­molecular N—H⋯Op hydrogen bonds.

Intramolecular Hydrogen Bonding in Disubstituted Ethanes. A Comparison of NH···O- and OH···O- Hydrogen Bonding through Conformational Analysis of 4-Amino-4-oxobutanoate (succinamate) and Monohydrogen 1,4-Butanoate (monohydrogen succinate) Anions

Relative strengths of amide NH...O- and carboxyl OH...O- hydrogen bonds were investigated via conformational analysis of succinamate and monohydrogen succinate anions with the aid of vicinal proton-proton NMR couplings and B3LYP DFT quantum mechanical calculations for a variety of solvents. New experimental results for succinamate are compared with those obtained from previous studies of monohydrogen succinate. While some computational results for monohydrogen succinate were published previously, the results contained herein are the product of a more powerful methodology than that used earlier. The experimental results clearly show that intramolecular hydrogen-bond formation is more favored in aprotic solvents than in protic solvents for both molecules. Furthermore, the preference of the succinate monoanion for the gauche conformation is much stronger in aprotic solvents than that of succinamate, indicating that the OH...O- hydrogen bond is substantially stronger than its NH...O- counterpart, despite the approximately 5 kcal cost for formation of the E configuration of the carboxyl group needed to make an intramolecular hydrogen bond. The actual energy differences between formation of internal hydrogen bonds for monohydrogen succinate and succinamate anion were estimated by comparison of the relative values of K1 of the respective acids in water and DMSO by a procedure first developed by Westheimer. Recent theoretical work with succinamate highlights the necessity of considering substituent orientational degrees of freedom to understand the conformational equilibria of the central CH2-CH2 torsions in disubstituted ethanes. Similar methodology is applied here to succinic acid monoanion, by mapping potential-energy surfaces with respect to the CH2-CH2 torsional, carboxyl-substituent rotational, and carboxyl-proton E/Z isomeric degrees of freedom. Boltzmann populations were compared with gauche populations estimated from the experimentally determined coupling constants. The quantum mechanical results for succinamate show a much weaker tendency toward hydrogen bonding than for the succinic acid monoanion. However, the theoretical methods employed appear to substantially overestimate contributions from intramolecularly hydrogen-bonded structures for the succinic acid monoanion when compared with experimental results. Natural bond orbital analysis, applied to the quantum mechanical wave functions of fully optimized gauche and trans structures, showed a strong correlation between the population of amide sigma*(N-H) and carboxyl sigma*(O-H) antibonding orbitals and apparent hydrogen-bonding behavior.

Exploration of a binding mode of indole amide analogues as potent histone deacetylase inhibitors and 3D-QSAR analyses

Docking simulations and three-dimensional quantitative structure–activity relationship (3D-QSAR) analyses were conducted on a series of indole amide analogues as potent histone deacetylase inhibitors. The studies include comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA). Selected ligands were docked into the active site of human HDAC1. Based on the docking results, a novel binding mode of indole amide analogues in the human HDAC1 catalytic core is presented, and enzyme/inhibitor interactions are discussed. The indole amide group is located in the open pocket, and anchored to the protein through a pair of hydrogen bonds with Asp99 O-atom and amide NH group on ligand. Based on the binding mode, predictive 3D-QSAR models were established, which had conventional r 2 and cross-validated coefficient values ( r cv 2 ) up to 0.982 and 0.601 for CoMFA and 0.954 and 0.598 for CoMSIA, respectively. A comparison of the 3D-QSAR field contributions with the structural features of the binding site showed good correlation between the two analyses. The results of 3D-QSAR and docking studies validate each other and provided insight into the structural requirements for activity of this class of molecules as HDAC inhibitors. The CoMFA and CoMSIA PLS contour maps and MOLCAD-generated active site electrostatic, lipophilicity, and hydrogen-bonding potential surface maps, as well as the docking studies, provided good insights into inhibitor–HDAC interactions at the molecular level. Based on these results, novel molecules with improved activity can be designed.

N,N′-Bis[2-(2-pyridyl)ethyl]dithiooxamide

The title compound, C16H18N4S2, has a crystallographic inversion centre at the mid-point of the central C—C bond. The plane of the dithio­oxamide fragment is approximately perpendicular to the plane of the dimethyl­ene bridge [dihedral angle = 84.8 (1)°], the plane of which is in turn normal to the pyridine ring plane [dihedral angle = 89.80 (8)°]. An inter­molecular N—H⋯N hydrogen bond involving the amide NH group and the pyridine N atom [N⋯N = 3.0503 (18) A and N—H⋯N = 145.8 (14)°] links the mol­ecules into chains extending along the c axis.

Quantification of glycine and taurine conjugated bile acids in human bile using 1H NMR spectroscopy

A simple method for quantification of conjugated bile acids in human bile using (1)H NMR spectroscopy is presented. Bile acids in human bile are essentially conjugated with either glycine or taurine. The amide NH resonances from the conjugated bile acids are invariably devoid of interfering signals in (1)H NMR spectra. Under physiologic conditions of human bile (pH approximately 7.0 to 7.7), amide signal intensities are attenuated due to the chemical exchange and hence quantitative estimation is precluded. In the present study, the quantity of total glycine and taurine conjugated bile acids could be obtained accurately by suppressing the amide exchange by reducing the pH slightly lower than physiologic value (6.0 +/- 0.5). Further, the quantity of glycine conjugated bile acids can be calculated accurately by subtracting the quantity of taurine conjugated bile acids from the total conjugated bile acids as determined from the present method.

Relation between Intramolecular NH···S Hydrogen Bonds and Coordination Number in Mercury(II) Complexes with Carbamoylbenzenethiol Derivatives

A novel series of bis(carbamoylthiophenolato)mercury(II) complexes, [Hg(S-RNHCOC6H4)2] (1, R = 2-t-Bu; 2, R = 2-CH3; 3, R = 2-C6H5CH2; 4, R = 4-t-Bu), and a tetrakis(carbamoylthiophenolato)mercury(II) complex, (NEt4)2[Hg-(S-2-CH3NHCOC6H4)4] (5), were synthesized and characterized by 1H NMR, IR, 199Hg NMR, and crystallographic analyses. The bis(carbamoylthiophenolato)mercury complexes 1-3 do not have intramolecular NH...S hydrogen bonds between the amide NH group and the sulfur atom coordinated to mercury, whereas the tetrakis(thiophenolato)mercury complex 5 does have an intramolecular NH...S hydrogen bond. A relatively weak NH...S hydrogen bond in 5 can be seen in the 1H NMR spectra and the IR spectra in chloroform and in the solid state. The 199Hg NMR spectra in bis(carbamoylthiophenolato)mercury complexes 1-4 show a downfield shift, with an increase in the flow of electrons to mercury(II) from the oxygen atom due to the intramolecular Hg...O bonding interaction. Conversely, the 199Hg NMR spectra in 5 show a high-field shift with a decrease in the flow of electrons to mercury(II) from the sulfur atom due to the intramolecular NH...S hydrogen bond.

Identification of the Geometric Requirements for Allosteric Communication between the α- and β-Subunits of Tryptophan Synthase

The pyridoxal 5'-phosphate-dependent tryptophan synthase alpha2beta2 complex is a paradigmatic protein for substrate channeling and allosteric regulation. The enzymatic activity is modulated by a ligand-mediated equilibrium between open (inactive) and closed (active) conformations of the alpha- and beta-subunit, predominantly involving the mobile alpha loop 6 and the beta-COMM domain that contains beta helix 6. The alpha ligand-triggered intersubunit communication seems to rely on a single hydrogen bond formed between the carbonyl oxygen of betaSer-178 of beta helix 6 and the NH group of alphaGly-181 of alpha loop 6. We investigated whether and to what extent mutations of alphaGly-181 and betaSer-178 affect allosteric regulation by the replacement of betaSer-178 with Pro or Ala and of alphaGly-181 with either Pro to remove the amidic proton that forms the hydrogen bond or Ala, Val, and Phe to analyze the dependence on steric hindrance of the open-closed conformational transition. The alpha and beta activity assays and the equilibrium distribution of beta-subunit catalytic intermediates indicate that mutations do not significantly influence the intersubunit catalytic activation but completely abolish ligand-induced alpha-to beta-subunit signaling, demonstrating distinct pathways for alpha-beta-site communication. Limited proteolysis experiments indicate that the removal of the interaction between betaSer-178 and alphaGly-181 strongly favors the more trypsin-accessible open conformation of the alpha-active site. When the hydrogen bond cannot be formed, the alpha-subunit is unable to attain the closed conformation, and consequently, the allosteric signal is aborted at the subunit interface.

Effects of the Intramolecular NH···S Hydrogen Bond in Mononuclear Platinum(II) and Palladium(II) Complexes with 2,2‘-Bipyridine and Benzenethiol Derivatives

A series of complexes, [M(bpy)(SAr)2] (M = platinum(II) or palladium(II), bpy = 2,2'-bipyridine, SAr = 2- or 4-(acylamino)benzenethiolate, or 2-(alkylcarbamoyl)benzenethiolate), were synthesized and characterized on the basis of 1H NMR, IR, and electrochemical properties. The structures of [Pt(bpy)(S-2-Ph3CCONHC6H4)2] (1) and [Pt(bpy)(S-2-t-BuNHCOC6H4)2] (3) were determined by X-ray analysis. The complexes have intramolecular NH...S hydrogen bonds between the amide NH group and the sulfur atom. A weak NH...S hydrogen bond in these complexes and [Pd(bpy)(S-2-Ph3CCONHC6H4)2] (4) is detected from the 1H NMR spectra and the IR spectra in chloroform and in the solid state. [Pt(bpy)(S-2-Ph3CCONHC6H4)2] (1) exhibits a remarkably high-energy-shifted lowest-energy band in UV-visible spectra and has a positively shifted oxidation potential. The blue-shift of 42 nm and the positive shift of +0.24 V, as compared to those of [Pt(bpy)(SC6H5)2), are due to the effect of the NH...S hydrogen bond.