NF EN Research Articles

Can TDABC (Time-Driven Activity-Based Costing) help the NOVO hospital's medical biology laboratory to value the appropriate prescription? - Role of the biologist in reducing healthcare costs

The relevant and correct prescribing of medical biology is a major public health issue. Correct prescribing is a legal obligation under article L6211-8 of the French Public Health Code and is an integral part of the biologist's daily work, already specified in the 2012 (section 4.7) and 2022 (section 5.3.3) versions of the NF EN ISO 15189 standard. COFRAC document SH REF 02 v08 specifies the requirements for consultancy services. The adaptation of the prescriptions is a revision of the contract with the prescriber, which makes it possible to optimize patient care and ensure the satisfaction of the laboratory users. Although essential, accurate prescribing is time consuming. "Chronophage" is the term that has been used for almost a decade. At present, the work of biologists in this area is not valued. In fact, there is no evaluation system to highlight this regulation control activity. To date, no work has been published to estimate this time, this chronophagy, and to evaluate its impact. Cost measurement using Time-Driven Activity-Based Costing (TDABC), a variant of Activity-Based Costing (ABC), is based on a process approach. The main contribution of TDABC is that it uses a single cost driver: time. Serum immunofixation is a test used to confirm and monitor plasma cell dyscrasias, the archetype of which is multiple myeloma. The learned societies and the IMWG provide explicit diagnostic criteria, but the guidelines do not address the frequency of follow-up. In particular, the frequency of repeat and follow-up serum immunofixation remains unaddressed from an evidence-based medicine perspective. This work has made it possible to highlight the savings made between 1st January and 31th August 2023 thanks to the involvement of the biologist and to highlight his essential role in the process of controlling the overall expenditure (reagents, human resources, time and money) in the specialized biochemistry sector (bench: proteins) and to strengthen the role of the biologist within the institution. The various players in the healthcare sector - prescribing physicians, biologists, hospital administrators and, last but not least, patients - all have an essential role to play in maximizing value for patients and in the healthcare economy.

Quality Of Drinking Water In An Area With High Gold Panning Activity In Côte d'Ivoire (Daloa, Centre-West)

Background: Gold panning has experienced remarkable growth in recent decades in Côte d’Ivoire. This activity contributes substantially to local economies. However, the use of toxic chemicals has an impact on human health and the environment, particularly water resources. The aim of this study was to evaluate the level of contamination of drinking water by metallic trace elements, cyanide and pesticides in an area with high gold panning activity in Côte d'Ivoire. Materials and Methods: Five (5) surface water samples and 5 well water samples were collected in the area of the gold panning sites and then analyzed. The metallic trace elements were measured by atomic absorption spectrometry. Total cyanides were measured according to the NF EN ISO 14403-1 standard and the pesticides were analyzed using a UV-visible HPLC chain. Results:The average concentrations of the metallic trace elements found were 0.125; 0.002; 0.046; 0.036 and 0.009 µg/L respectively for arsenic, Cadmium, Iron, Lead and mercury in surface waters. In the well water, the concentrations of arsenic, cadmium, iron, lead and mercury were respectively 0.025; 0.001; 0.009; 0.007 and 0.002 µg/L. The average concentration of arsenic in all surface water samples and three well water samples was higher than the standard set by WHO (0.01 mg/Kg) for drinking water. Lead and mercury levels in surface water were also higher than recommended standards for drinking water. Cyanide has been found in surface and well waters at relatively low concentrations. Twenty-five pesticides belonging to the chemical families of organochlorines, organophosphates, carbamates and other compounds derived from urea and atrazine were found in the water samples analyzed. Farmer’s well water was qualitatively the most contaminated with the simultaneous presence of several pesticides. The sum of the measured pesticide concentrations for each sample complied with the recommendations for drinking water, set at 0.50 µg/L. Conclusion: Drinking water in this locality is contaminated by metallic trace elements, cyanide and pesticides. The quality of drinking water in this locality must be subject to permanent monitoring in order to protect the health of the population.

Feedback on the detection of SARS-CoV-2 by the point-of-care testing

In order to improve the detection and rapid diagnosis of the SARS-CoV-2 coronavirus, we evaluated the ID NOW™ COVID-19 isothermal gene amplification technique in parallel with the real-time PCR technique (Diasorin) routinely used in the laboratory during a prospective study in the 2020 season. As this technique showed satisfactory sensitivity and specificity of 98% and 97.5% respectively, we then proposed to implement the detection of SARS-CoV-2 coronavirus in the emergency department and maternity as a point-of-care test (POCT) for the 2020-2021 season and to evaluate its clinical and organizational impact. This article summarizes the results obtained and highlights the advantages and limitations of this strategy implemented in the emergency department, particularly in terms of time spent in the department, hospitalization rates, anticoagulant treatment and early isolation of patients, as well as the organizational impact on the maternity unit. Based on this experience, we report on the regulatory constraints that apply when setting up a POCT and the steps required to validate the accreditation in accordance with standard NF EN ISO 22870.

Life Cycle Analysis of the Production of Neutral Alcohol Obtained from Winemaking Byproducts for Use in Perfumery

As is the case in many other industries, major fragrance brands are now incorporating circular-economy in their product-development strategies. This is in response to growing consumer demand for more environmentally friendly products. In light of this objective, perfumery raw materials must be evaluated against environmental and societal criteria. This more critical context, coupled with the fact that alcohol can constitute up to 95% of a fragrance, means greater attention is being given the origin of this fragrance solvent. Industries are now becoming keenly interested in seeking out more environmentally friendly alternatives to alcohols derived from field crops (sugar beet, wheat, corn, sugarcane) so as to use a sustainable alcohol with excellent olfactory performance. To this end, this study entailed evaluating the environmental impact of an extra-neutral grape alcohol produced in France and obtained from winemaking residues. Its olfactory performance has been proven to meet the expectations and industrial needs of perfumers. The environmental impact was assessed by a life cycle analysis (LCA) carried out per the current NF EN ISO 14040 standard. The results show that extra-neutral grape alcohol is positively comparable to sugar beet alcohol, particularly as concerns greenhouse gas emissions. Upcycled grape alcohol is also produced through sustainable management of winemaking waste and does not conflict with land needs for food production. Lastly, unlike field crops, grapevines in the form of vineyards are a perennial crop and therefore serve as major carbon sinks, much the same way forests do.

Production of a high-energy solid biofuel from biochar produced from cashew nut shells

The aim of the study is to produce a solid biofuel of high physico-mechanical and energetic quality from heat-treated cashew nut shells. Raw cashew nut shells are heat treated at 300 °C for 120 min at a heating rate of 1 °C/s. The resulting biochar is milled to 74 μm. Sugar cane molasses was incorporated into the biochar powder at a rate of 10% without the addition of water. The mass yields of solid, liquid and gaseous products obtained were 46.5%, 27.6% and 25.9% respectively. The solid biofuel produced has slightly improved physicochemical and energy properties over biochar, except ash and moisture content. Thus, the addition of binder and densification increased the ash and moisture content of the solid biofuel compared to the biochar obtained. With a higher calorific value of 33.02 MJ/kg, the solid biofuel has high water resistance and meets the quality requirements of class A1 of the NF EN ISO 17225-6 standard in terms of density and mechanical strength. Solid biofuel is ideal for use in households and biomass power stations.

Complete physico-chemical characterisation of foundry waste

ABSTRACT The manufacture of foundry metal parts generates various types of mineral wastes. Studies mentioned in the literature are mainly interested in the characterisation of foundry sands and their recycling way. The other wastes (finer than sand) are not dealt and are currently stored in landfills without any recycling solution. This paper aims to fill this gap and reports the complete characterisation of foundry wastes (FW) we carried out to find a way of recycling these materials. FWs were characterised by X-ray fluorescence, X-ray diffraction, scanning electron microscopy and thermogravimetry analyses (TGAs). Leaching tests complying with the NF EN 12457-2 standard were also carried out to evaluate the pollution degree of the different waste products. The results of this work that foundries do not produce just one type of waste, but several. Five types of waste were thus analysed and the results indicated in the first step that each sand was unique and in a second one that the two foundries present a certain similarity with regard to their materials. This complete characterisation study will provide a better understanding of their chemical composition and degree of pollution, so that they can be used more effectively in cement blends, which will be the subject of the rest of this study. The reuse of FW in concrete and mortars is possible and can reduce the environmental impact caused by their storage in landfills.

Multicriteria analysis of the components of ecological paving stones made from plastic and glass waste, and granular reinforcements

The use of plastic waste as a resource in construction applications is an opportunity for environmental protection, conservation of natural resources and reduction of pollution. Unfortunately, they don't always withstand the stresses to which they are subjected, leading to subsidence and collapsing. An analysis of the causes using the Pareto curve shows that 74.47 % of the causes of this collapse are due to poorly formulated mixes and poor choice of raw materials for the composite. The compressive test carried out on the first sample of pavers studied showed a maximum compressive strength value of 4.6 MPa, which is below the standard requirements. As a result, the pavers were considered unsuitable for use on a T5 road. Through the use of the SUPERDECISION software, we were able to identify two favourable constituent materials - glass/glass waste and gravel - for the production of composite paving stones. By adding low-density plastic waste, collected, cleaned and crushed in the form of aggregates, we obtain a compressive strength of 7 MPa with gravel and 8 MPa with glass waste. These values are below the recommendations of the NF EN 1339 standard (Rc ≥ 20 MPa) for T5 traffic. The best composition for ecological paving is therefore (PET/PP/PEBD) + sand + glass (50/12.5/37.5). Analyzing these results shows that the raw materials used for ecological paving should be adapted to the loads.

Experimental study on chemical and thermomechanical properties of concrete incorporating Washingtonia robusta fibres

The aim of this work is to provide a new composite material for applications in the thermal insulation of buildings. The composite was made with mortar reinforced with natural fibres extracted from the petiole of the Washington robusta (WR) palm tree. The fibres used were first chemically characterised by energy-dispersive X-ray spectroscopy, scanning electron microscopy, X-ray and infrared diffractometry spectroscopies alongside tensile testing to discover their morphological structure. Afterwards, the fibres were incorporated into mortar with mass percentages varying from 0 to 4% to determine experimentally the thermomechanical properties of the manufactured samples. The chemical findings indicated that WR fibres are rich in cellulose, hemicellulose and lignin, and possess a high crystallinity index, which enhances the mechanical properties and durability of the composite. The density obtained for the composite W2RC4% is 1305 kg/m3 and less than 2000 kg/m3; this composite can thus be classified as a lightweight concrete according to the standard NF EN 206 + A2/CN (2022). The thermal conductivity and thermal effusivity dropped by about 60% and 42%, respectively. Moreover, the WR reduces the compressive strength (76%) and the flexural strength (36%) to minimum values, respectively, of 5.9 MPa and 3.8 MPa. These values meet the mechanical requirements of lightweight concretes (> 3.5 MPa).

Portuguese macroalgae and halophytes for human consumption: Minimal risk of norovirus and Salmonella infection

Information regarding microbiological hazards in edible macroalgae and halophytes is scarce, and standard methods for detecting norovirus in vegetables have not yet been validated for these types of food products. Accordingly, the suitability of the NF EN ISO 15216-2 standard method for macroalgae and halophytes was evaluated using 57 samples collected along the Western coast of mainland Portugal. The presence of Salmonella in 46 samples was also tested to confirm potential hazard. The viral extraction process was validated for 72% of the samples, with results showing that the standard method is suitable for green and red macroalgae, as well as for halophytes. For brown macroalgae, a process optimization should be considered. None of the samples revealed the presence of norovirus genomes, neither genogroups I nor II. Salmonella was detected in one of the samples analysed. The present study shows the great potential of Portuguese coastal areas for marine agriculture.

Utilizing Fine Marine Sediment as a Partial Substitute for Sand in Self-Compacting Concrete Specially Designed for Application in Marine Environments

The disposal of marine sediments poses a significant economic and environmental challenge on a global scale. To address this issue and promote resource optimization within a circular-economy paradigm, this research investigates the viability of incorporating untreated fine marine sediments as a partial replacement for sand in self-compacting concrete (SCC) designed especially for application in marine environments (an exposure class of XS2 and a resistance class of C30/37 according to standard NF EN 206). The concretes mis-design incorporating 30% by weight of sediment as a sand substitute was initially designed with the modified Dreux–Gorisse method. The findings indicate that it is feasible to design an SCC suitable for marine environments, incorporating 30% sediment replacement content and without significantly compromising concrete properties, durability, or the estimated lifespan of the formulated concretes. The integration of marine sediment as a sand substitute into the SCC mix design reduces the amount of binder and limestone filler without compromising the paste volume. This results in a significant saving of natural sand resources and a reduction in CO2 emissions for SCC made with marine sediment.

Impacts of Conventional Plowing on The Bearing Capacity of Ferralitic Soil in Benin Republic

The present work involved a study of the impact of tillage on soil resistance using a three-body disc plow hitched to a 60 hp tractor, on soil structure. All plowing was carried out on the same day with this plow on 21 plots, divided into 3 blocks of 7 elementary plots serving as treatments. Treatments are designated P0. P1, P2, P4, P8, P12, and P15 corresponding to plowing frequencies: 0, 2, 4, 8, 12, and 15. The P0 treatment is used as a control. The tests were carried out in accordance with the standards: NF P 94-050.1995, for water content by weight, NF EN 1097-3.1998, for apparent density, and NF EN 1097-6.2001 for porosity. Soil conductivity was determined using the Muntz method. The results show that plowing at a minimum frequency of one or two per cycle provides better soil resistance. Two plowings per cycle gave better soil resistance (20.8 (0.27) bc; 19.6 (0.27) d), water content (0.016 (0.002) b ; 0.015 (0.002) b). Soil hardness and density decrease with increasing water content, while porosity increases with plowing frequency (0.437 (0.017) a to 0.478 (0.017) a). For this type of soil, one or two plowings are more than enough to maintain better soil resistance and water conservation. This work has enabled rural actors, and farm machinery operators in particular, to better carry out tillage operations. Keywords: Agricultural soil, soil tillage, mechanical properties, penetration resistance, Benin Republic.

Multiaxial fatigue on cableway installations components: use of the Dang Van criterion based on detail categories of EN 1993-1-9 standard.

In order to predict fatigue lifetime of cableway installations components, EN 1993-1-9 standard (Eurocode 3) is commonly used. However, EN 1993-1-9 is based on a major hypothesis : stress state has to be uniaxial. But for some components, this uniaxial hypothesis is not verified (for example : fixed grip of chairlift submitted to horizontal tightening stress and vertical load stress, or chairlift structure stressed by gravity and lateral shake when passing a tower). It then appears important to use a fatigue criterion taking into account multiaxial stress state. Our research work proposes to apply for fatigue study the Dang Van criterion, which takes into account multiaxial stress state. Results are then compared to Eurocode SN curves, representing a huge experimental database on unixaxial fatigue, that we propose to use in multiaxial fatigue thanks to an appropriate recalibration. The scientific originality of this work lies in the justification of that Dang Van criterion's recalibration. Therefore, a theorical study ensures that our use of Dang Van's multiaxial criterion is still consistant with the Eurocode SN curve even if these SN curves are experimentally performed under uniaxial stress state. Finally, that hitherto unpublished use of the Dang Van criterion makes it possible to consider the entire database of detail categories defined in NF EN 1993-1-9, by generalising their use for components under multiaxial fatigue.

Thermal and thermochemical treatments against fretting failure applied to power transmissions

Some power transmission components are subject to the fretting corrosion failure mode, which results in rapid wear of mating surfaces or premature fatigue crack initiation. Fretting corrosion is generated by micro-movements of surfaces in contact. In mechanical transmissions, it is found in particular on shrink-fit connections (bearing rings, for example) and on key and spline connections when they are misaligned or not with the well design fit.The sectoral board for mechanical transmissions and rolling bearings and CETIM is investigating the potential of technical solutions (materials, heat treatment, lubrication, etc.) to prevent fretting. This article presents a study of the impact of thermal and thermochemical heat treatments of steels used in power transmissions on the appearance, morphology and intensity of corrosion fretting.Among the materials and heat treatments commonly used in mechanical transmissions (NF EN 683, ISO 6336-5), the following variants were studied: through-hardened steels (42CrMo4, 100Cr6), surface-hardened steels (42CrMo4), case-hardened steels (20MnCr5) and nitrided steels (42CrMo4). These variants are compared using a standardized ASTM G204 test, which involves oscillating a pressurized, lubricant-free pin (100Cr6) on a plate (the tested variant) for 24 hours. The peak-to-peal slip amplitude range is set at 50µm or 100µm. Tangential forces during testing, then the volume loss of pin and plate after testing, were measured, analysed and compared. The experimental study reveals wear resistance and depend on heat and thermochemical treatment as well as slip amplitudes. Through hardened 100Cr6 has better fretting resistance than nitrided 42CrMo4 for 50µm amplitude, but the results are completely reversed at 100µm amplitude.

Comparative Study of the Normative Requirements for the Design of a Lattice Pylon: Case of A 225 kV Transmission Line

It is undeniable that a correct estimate of the loads likely to affect a structure throughout its useful life is the key to any design. Moreover, a thorough knowledge of the parameters used to estimate these loads makes it possible to refine the calculations while giving a certain confidence to the designer. This is why this paper presents a comparative study of some standards directly affecting the wind loads applied to the components of electrical power transmission lines (in particular the standards NF EN 50341-1: 2012, DIN VDE 0210-2011 and IEC 60826 - 2003) and the resistance of the latter to the various forces which are transmitted in the bars (ASCE 10 and NF EN 50341-1:2001). To carry out this work, it was first a question of analyzing and understanding each dimensioning standard, then of visualizing the global environment of the different calculation rules, emphasizing the reason underlying the choice of a specific standard, and finally comparing these standards from the data of a specification. Regarding wind loads, it generally emerges that the DIN VDE 0210: 2011 standard is the most suitable for dimensioning because it gives the lowest load values. As for the verification of the stability of the structure, the comparison between the ASCE 10 and NF EN 50341-1:2001 standards for a triangle arming pylon of a 225 kV line showed that for the same work rate (97 %), the busiest bar has the dimensions 150 cm x 150 cm x 14 mm and 140 cm x 140 cm x 14 mm respectively for the ASCE 10 and NF EN 50341-1:2001 standards; which amounts to a saving of 13.44 kg in terms of mass and 8829.81 FCFA in terms of cost.

Verification of analytical performance of sodium assay on the Abbott architect ci8200: Experience of the central laboratory Mohammed VI Oujda

Introduction: Sodium is the main extracellular cation. It plays a fundamental role in maintaining osmotic pressure and hydroelectrolyte balance, and is therefore implicated in many pathological conditions. Sodium determination is a basic biochemistry laboratory test. Objective: the aim of our work is to verify the method of sodium determination by potentiometry on the Architect CI 8200 automated system (Abbott), in order to meet the quality requirements for laboratory accreditation under standard NF ISO 15189. Materials and methods: following the recommendations of NF EN ISO 15189, we evaluated the repeatability, intermediate precision, accuracy and uncertainty of measurement of the serum sodium assay on the Architect CI 8100 automated system, as well as a mirror comparison of the two Architect CI 8100 1 and 2. The CV values obtained were compared with those set by learned societies (SFBC and RICOS). Results and discussion: The results obtained show satisfactory repeatability for the 3 low, medium and high levels, with CV1= 1.1%, CV2=0.8% and CV3= 0.76% respectively, and satisfactory intra-laboratory reproducibility for the 3 low, medium and high levels, with CV1= 1.05%, CV2= 0.95% and CV3= 0.75% respectively. For comparison, the Bland-Altman diagram showed that the mean bias between the two automata was of the order of 0.29%, the correlation coefficient r= 0.98 with a mean difference of 0.40 mmol/l, a standard deviation of 0.675 mmol/l and a linear regression equation Y = 1.027 X - 4.073. Corrective measures were envisaged to remedy the various errors identified. To solve any malfunction in a sustainable way, it is essential to search for the anomaly by applying the Ishikawa diagram. Conclusion: The results obtained have enabled us to verify the performance of the sodium assay method and compare it with the analytical objectives set, in order to meet the regulatory and normative requirements to which our laboratory is committed.

IMPACT OF HEAT TREATMENT METHOD AND MILLET POD TYPE ON REAL DENSITY AND POZZOLANIC ACTIVITY INDEX BY ASH RESISTANCE

Artificial pozzolans derived from agricultural by-products are generally obtained by heat treatment. The thermal treatment method used and the type of waste influence the quality of the final product. The aim of this study was to measure the actual density and pozzolanic activity index of millet pod ash produced in three different ways. Ash A is produced by direct calcination of the husks from which the millet seeds are removed (without the stalk). Ash B is obtained by burning and then calcining the millet husks. Ash C is produced by direct calcination of the millet straw (husks + stalks). The actual density was determined in accordance with standard NF EN 1097-6. The pozzolanic activity index by resistance was measured on the basis of the recommendations of American standard ASTM-C618. For the ashes A, B and C produced, we respectively obtained true densities of 2.256 g/cm3 2.150 g/cm3 and 2.033 g/cm3. The pozzolanic activity indices per strength obtained were 0.42, 0.23 and 0.70 respectively. These results showed that the ash produced from direct calcination of raw millet waste (straw) had the best reactivity and the lowest density. It is therefore well suited to the production of low-density cementitious matrix composites.

Verification of analytical performance of the aspartate aminotransferase assay on the Abbott Alinity ci®: Experience of the central laboratory Mohammed VI Oujda

The standard NF EN ISO 15 189 mandates the verification of analytical methods. It involves evaluating an analytical method's effectiveness in accordance with a precisely laid out protocol before comparing it to previously established analytical objectives. Any biologist must be concerned with mastering this approach. In this work, we compare two automats: Alinity ci ® and Architect ci-8200® Abbott, to show the results of the protocol of verification of the method of determination of aspartate aminotransferase (AST). Aspartate aminotransferase is an enzyme found in many tissues, particularly liver and muscle, including heart muscle. Its measurement is particularly useful for diagnosing and monitoring liver disease.

Verification of the analytical performance of the serum gamma-glutamyl transferase assay on the Abbott Alinity ci®: Experience of the biochemistry laboratory of the Mohammed VI university hospital of Oujda

Introduction: As part of our study, we set out to evaluate the analytical performance of the gamma-glutamyl transferase (GGT) assay using an Abbott kit on the Alinity ci® automated system in the biochemistry laboratory of the CHU Mohammed VI in Oujda. Materials and methods: This study assessed the repeatability and reproducibility of Alinity ci® and compared the results obtained by the Alinity ci® and Architect ci-8200® automated systems. Results: The results obtained met the acceptability criteria recommended by the supplier and the Valtec protocol of the Société Française de Biologie Clinique (SFBC), demonstrating overall satisfaction with the study. The Alinity ci® automated system demonstrated the analytical performance required for accurate and reliable determination of GGT levels. Discussion: Validation of an analytical method is an essential step in guaranteeing that the result obtained is as close as possible to the reference value of a sample. Several standards and technical guides set out requirements for the performance criteria of an analytical method, notably NF EN ISO 15 189. Conclusion: the verification study of the GGT assay method produced satisfactory results, providing a high level of reliability for analysis results from the central laboratory of the CHU Mohammed VI d'Ouja. This work forms an essential basis for developing an accreditation procedure, which is part of the quality approach to which our laboratory is committed.

Collaborative validation of the quantification method for 57 allergens in ready to inject fragrance samples

AbstractThis publication presents the collaborative work conducted in CEN/TC 347/WG4 ‘Fragrance and colophony’ working group to evaluate the robustness of a GC–MS analytical methodology to quantify the extended list of 57 fragrance allergens in ‘ready to inject’ samples. The intention of this group was to provide an updated and consensual standard for the quantification of the extended allergen list. The analytical approach was based on the similar methodology than the original one developed for the 26 allergens, using a universal GC–MS simple quadrupole instrument. A ring test was performed among the different end‐user experiences of the CEN group to test the method on a representative fragrance matrix. Accuracy profile method was used to validate the analytical method within the 2–240 mg/kg concentration range. Thanks to the use of commercial standard mixes and dedicated automation of decisional tree for data treatment, 89% of tolerance intervals of targeted allergens were included into the acceptance limits in the whole 2–240 mg/kg concentration range. The objective of this article was to provide some complementary data to implement the NF EN 16274 standard in an analytical laboratory and to highlight the inherent difficulties linked to extended data treatment and complexity for the recovery of low concentration analytes and potential coelutions in a wide diversity of ready‐to inject samples.

Slag valorization from electric arc furnaces in concrete paver formulation

Slag is produced in enormous amounts by steelworks, which are scrap metal recycling industries that produce steel wire rods and steel reinforcing bars. In the absence of a sustainable recovery route, the latter pose a possible environmental risk. This work is concerned with the valorization of this by-product in the production of concrete pavers. To accomplish so, the slag was previously evaluated using X-ray fluorescence, particle size analysis, density, absorption coefficient, and other criteria that are recommended for usage in this field. The pavers were then manufactured using the Dreux Gorisse recipe, with slag substituting the gravel. The results demonstrate that the slag is rich in iron, which is characterized by lime, silica, and magnesia rates of 31.73%, 16.33%, and 16.33%, respectively, low percentages of manganese and alumina. The water absorption rate is between 2.6% and 2.8%, and their density is similar to 3.6 kg/l. Los Angeles has a 20-coefficient. As a result of their inclusion in the design of the pavers, they were able to split in line with the NF EN 1338 standard and retained a reasonable degree of tensile strength.