Magnetic Nanostructures Research Articles

Exploring double-diffusive convection in ferromagnetic Carreau nanofluid with magnetic dipole: Insights for solar thermal systems over plate, wedge, and stagnation

The use of ferromagnetic Carreau nanofluid in solar thermal systems enhances heat transfer and magnetic effects, optimizing solar collector design, improving solar power efficiency, and innovating nanofluid-based solar heaters and energy storage. Magnetic nanostructures significantly impact viscosity and thermophysical properties, influencing Ferrofluids' magneto-viscous nature. The investigation illustrates double-diffusive convection in radiative flow past three different geometries of ferromagnetic Carreau nanofluid, emphasizing the novel discussion of diffuse-thermal and thermo-diffusion impacts. Numerical solutions are obtained using the shooting technique with the Runge-Kutta fourth-order approach. Graphs and numerical data in tables depict the impacts of pertinent parameters. The study reveals that the radiation parameter, Soret parameter, and Dufour parameter contribute to temperature improvement as they are enhanced. These findings showcase the potential for advancing solar thermal systems through the utilization of ferromagnetic Carreau nanofluid, offering insights for sustainable solar energy applications. As the thermophoresis parameter increases from 0.001 to 0.005, the percentage change in the Nusselt number decreases for all three locations: Plate (0.90 %–0.66 %), Wedge (0.77 %–0.62 %), and Stagnation Point (0.62 %–0.54 %). This indicates that while the absolute values of the Nusselt numbers increase, the rate of change becomes smaller as increases.

Comparative In Vitro Study between Biocompatible Chitosan-Based Magnetic Nanocapsules and Liposome Formulations with Potential Application in Anti-Inflammatory Therapy.

This study describes the comparison between the interaction of a series of peptide-functionalized chitosan-based nanocapsules and liposomes with two cell lines, i.e., mouse macrophages RAW 264.7 and human endothelial cells EA.hy926. Both types of nanocarriers are loaded with magnetic nanoparticles and designed for anti-inflammatory therapy. The choice of these magnetic nanostructures is argued based on their advantages in terms of size, morphology, chemical composition, and the multiple possibilities of modifying their surface. Moreover, active targeting might be ensured by using an external magnetic field. To explore the impact of chitosan-based nanocapsules and liposomes on cell cytophysiology, the cell viability, using the MTT assay, and cell morphology were investigated. The results revealed low to moderate cytotoxicity of free nanocapsules and significant cytotoxicity induced by chitosan-coated liposomes loaded with dexamethasone, confirming its release from the delivery system. Thus, after 48 h of treatment with nanocapsules, the viability of RAW 264.7 cells varied between 88.18% (OCNPM-1I, 3.125 µg/mL) and 76.37% (OCNPM-1, 25 µg/mL). In the same conditions, EA.hy926 cell viability was between 99.91% (OCNPM-3, 3.125 µg/mL) and 75.15% (OCNPM-3, 25 µg/mL) at the highest dose (25 µg/mL), the values being comparable for both cell lines. Referring to the cell reactivity after dexamethasone-loaded liposome application, the lowest viability of RAW 264.7 cells was 41.25% (CLDM5CP-1, 25 µg/mL) and 58.20% (CLDMM2CP-1 1.25 µg/mL) in the endothelial cell line, proving a selective character of action of nanocarriers. The cell morphology test, performed to support and confirm the results obtained by the MTT test, revealed a differentiated response for the two types of nano-carriers. As expected, an intense cytotoxic effect in the case of dexamethasone-loaded liposomes and a lack of cytotoxicity for drug-free nanocapsules were noticed. Therefore, our study demonstrated the biocompatible feature of the studied nanocarriers, which highlights them for future research as potential drug delivery systems for pharmacological applications, including anti-inflammatory therapy.

First-principles study of electronic and magnetic properties of Fe atoms on Cu2N/Cu(100)

Abstract First-principles calculations were conducted to investigate the structural, electronic, and magnetic properties of single Fe atoms and Fe dimers on Cu2N/Cu(100). Upon adsorption of an Fe atom onto Cu2N/Cu(100), robust Fe–N bonds form, resulting in the incorporation of both single Fe atoms and Fe dimers within the surface Cu2N layer. The partial occupancy of Fe-3d orbitals lead to large spin moments on the Fe atoms. Interestingly, both single Fe atoms and Fe dimers exhibit in-plane magnetic anisotropy, with the magnetic anisotropy energy (MAE) of an Fe dimer exceeding twice that of a single Fe atom. This magnetic anisotropy can be attributed to the predominant contribution of the component along the x direction of the spin–orbital coupling Hamiltonian. Additionally, the formation of Fe–Cu dimers may further boost the magnetic anisotropy, as the energy levels of the Fe-3d orbitals are remarkably influenced by the presence of Cu atoms. Our study manifests the significance of uncovering the origin of magnetic anisotropy in engineering the magnetic properties of magnetic nanostructures.

Investigating the optical and magnetic properties of engineered multifunctional graphene oxide and potential application in medical physics and nonlinear optics‏

Herein, the synthesis of multifunctional engineered GOs with the structure of GO@Fe3O4-ligands-CdTe quantum dots (QDs) by an environment-friendly aqueous method was reported. l-cystein (Cys), 3-trimethoxysilyl-propanethiol (TMSP), and glutathione (GSH) were selected as ligands. The as-prepared GO@Fe3O4-ligands-CdTe QDs hybrid nanostructures were characterized by different methods. The findings indicate that the nanocomposites of GO@Fe3O4–ligands–CdTe QDs demonstrate superparamagnetic properties at room temperature. The saturation magnetization values for GO@Fe3O4, GO@Fe3O4-Cys-CdTe, GO@Fe3O4-GSH-CdTe, and GO@Fe3O4-TMSP-CdTe, are 25, 14, 16, and 2 emu g−1, respectively. These nanocomposites show stable and strong luminescence at 580-600 nm. The magnetic nanostructures also reveal the absorption wavelength at 300-490 nm. Using TMSP ligand as a bridge between QDs and magnetic GOs, the luminescence of the nanostructure has not decreased much compared to CdTe QDs. The use of Cys ligand preserves the saturation magnetism of the nanocomposite more than magnetic GO, and the dispersed nanostructure is stable in water. Furthermore, the transverse and longitudinal optical (TO and LO) phonon modes of prepared GO@Fe3O4–ligands–CdTe QDs were obtained by Kramers-Kronig (KK) relations based on fourier-transform infrared (FTIR) spectroscopy. The Z-scan results show that the type of used ligand has a great effect on the nonlinear optical (NLO) properties of the final product. The largest NLO parameters are related to GO@Fe3O4- TMSP -CdTe QDs, and the values of nonlinear absorption coefficient and nonlinear refractive index were obtained as 2.17×10−3(cm/W) and10.27×10−8(cm2/W), respectively. As a result, GO@Fe3O4–ligands–CdTe QDs nanostructures can be considered as promising multifunctional nanostructures for various biomedical applications and NLO devices.

Enhancing thermoelectric effect with BaTiO3-doped ZrO2 tapes and ferromagnetic nanostructures

The Anomalous Nernst Effect (ANE) emerges as a promising candidate for converting heat into electricity through magnetic nanostructures. However, the substrate plays a central role in optimizing this phenomenon for future technological applications. Tapes of ZrO2 and BaTiO3-doped ZrO2, manufactured by tape casting, possess characteristic flexibility in the green state, which makes them suitable for use as coverings on virtually any curved surface. Moreover, BaTiO3 ceramic materials present piezoelectric properties, which, when combined with thermoelectric properties, can generate interesting heterostructures with simultaneous thermal and vibrational power conversion capabilities. This study explores the combination of tape casting and magnetron sputtering to improve the functionalization of ceramic tapes with ferromagnetic nanostructures. Specifically, it investigates the quasi-static and thermoelectric properties of heterostructures created by depositing NiFe thin films onto sintered ZrO2 and BaTiO3-doped ZrO2 tapes using magnetron sputtering. The results indicate a 71 % increase in the effective thermoelectric coefficient as the amount of BaTiO3 in the ceramic substrate increases. These findings suggest a new approach to integrating these techniques for the production of multifunctional materials for thermoelectric energy conversion.

The importance of long range Fe–Fe interactions in magnetically ordered 2D Fe0.2Ni0.8/Ni(001) and Fe0.3Ni0.7/Ni(001) alloy systems

We develop a theoretical approach to study the magnonic properties of the 2D ordered surface Fe–Ni alloys with 20% and 30% Fe on a face-centered cubic Ni(001) surface substrate. The surface alloy nanostructures in stable equilibrium are determined by computing the lowest energy configurations of constitutive supercells of the ordered alloys. The magnetic exchange constants of the ground state of the stable systems are calculated to define their Heisenberg Hamiltonians using the DFT Spin-Polarized Relativistic Korringa–Kohn–Rostoker (SPRKKR) method and considering Fe–Fe interactions up to third nearest neighbors. To determine the propagating exchange spin-wave modes, evanescent modes, and the consequent magnonic properties, the spin dynamics of the magnetic surface alloy nanostructures are solved using the phase field matching theory (PFMT). Our results indicate that the Fe–Fe exchange interactions up to third nearest neighbors are vital for accurately describing their magnonics. In particular, the exchange interactions influence the form of dispersion branches for the high-energy spin-wave modes of the Fe–Ni surface alloys considered. Appropriate Green’s functions are also derived from the PFMT method to compute the local densities of states (LDOS) for the atomic sites at the surface boundary. For the case of 20% Fe surface alloy, the Fe–Fe exchange interactions shift the Fe LDOS peaks to lower frequency intervals. We also distinguish the emergence of remarkable LDOS peaks for the he case of the 30% Fe surface alloy at specific Ni sites. These peaks change positions under second and third nearest neighbor Fe–Fe interactions, heralding new accessible spin-wave channels. Our results contribute to establishing a systematic understanding of the magnonics of the magnetic surface alloys of transition metal (TM) materials. This new knowledge will enable the study of the quantum transport of spin waves at interfacial alloy nanojunctions composed of such materials. The present DFT-PFMT theoretical approach is general and can be applied to other surface TM alloy magnetic nanostructures.

Harnessing Magnetic Nanoparticles for the Effective Removal of Micro- and Nanoplastics: A Critical Review.

The spread of micro- (MPs) and nanoplastics (NPs) in the environment has become a significant environmental concern, necessitating effective removal strategies. In this comprehensive scientific review, we examine the use of magnetic nanoparticles (MNPs) as a promising technology for the removal of MPs and NPs from water. We first describe the issues of MPs and NPs and their impact on the environment and human health. Then, the fundamental principles of using MNPs for the removal of these pollutants will be presented, emphasizing that MNPs enable the selective binding and separation of MPs and NPs from water sources. Furthermore, we provide a short summary of various types of MNPs that have proven effective in the removal of MPs and NPs. These include ferromagnetic nanoparticles and MNPs coated with organic polymers, as well as nanocomposites and magnetic nanostructures. We also review their properties, such as magnetic saturation, size, shape, surface functionalization, and stability, and their influence on removal efficiency. Next, we describe different methods of utilizing MNPs for the removal of MPs and NPs. We discuss their advantages, limitations, and potential for further development in detail. In the final part of the review, we provide an overview of the existing studies and results demonstrating the effectiveness of using MNPs for the removal of MPs and NPs from water. We also address the challenges that need to be overcome, such as nanoparticle optimization, process scalability, and the removal and recycling of nanoparticles after the completion of the process. This comprehensive scientific review offers extensive insights into the use of MNPs for the removal of MPs and NPs from water. With improved understanding and the development of advanced materials and methods, this technology can play a crucial role in addressing the issues of MPs and NPs and preserving a clean and healthy environment. The novelty of this review article is the emphasis on MNPs for the removal of MPs and NPs from water and a detailed review of the advantages and disadvantages of various MNPs for the mentioned application. Additionally, a review of a large number of publications in this field is provided.

Mathematical Modeling of Diffraction and Parametric Instability Thresholds for Magnetic Nanostructures Based on Magnetically Functionalized Carbon Nanotube Arrays

Mathematical Modeling of Diffraction and Parametric Instability Thresholds for Magnetic Nanostructures Based on Magnetically Functionalized Carbon Nanotube Arrays

Temperature and medium structurization effect on spontaneous evolution of domains and bubbles in magnetic nanostructures

Spontaneous evolutions of domains in magnetic nanowires and of magnetic bubbles in open ferromagnetic nanolayers are investigated using micromagnetic simulations. We compare temperature dependent dynamics of domain wall (DW) systems in Permalloy (Py) nanowires and systems of chiral DWs in ultra-thin nanowires with perpendicular magnetic anisotropy (PMA) and Dzyaloshinskii-Moriya interaction (DMI). In Py nanowires DWs collide and, in majority of cases, the collision leads to the DW annihilation in disagreement with the expectation of topological protection of sums of all the magnetic charges attached to the nanowire edges which are carried by DWs. For our purpose of discussing the DW collision in the presence of thermal excitations, we revisit the problem of field-driven collisions of DWs in Py nanowires at zero temperature. We claim that thermal fluctuations can counteract the collision-induced annihilation of DWs, thought further improvement of stabilization of domain structures is achievable via structurization of the magnetic nanowires (dividing them into grains). In PMA-DMI nanowires, thermally-excited chiral DWs can be randomly approaching or moving away while not being annihilated. A problem related to the motion of chiral DWs is the spontaneous motion of magnetic bubbles in open PMA-DMI planes. The magnetic bubbles expand or shrink to vanishing dependent on strength of the DMI interaction. Such a motion appears to be be strongly influenced by temperature and by structural discontinuities of the magnetic layer.

Silica Coating of Nickel–Iron Nanocomposite by Chemical Reduction Method

The study of magnetic nanostructures is interesting because of its applications. Some of them are the development of magnetic refrigerators, ferrofluids, drug delivery systems, fabrication of devices with giant magnetoresistance effects, and high-frequency transformers. The physical and chemical properties of metal changes due to silica coating. The interaction potential can be manipulated using surface coatings and also the particle shape can be controlled. Nanoparticles with a proper surface coating are of interest for several other applications in optoelectronic devices and in the biomedical field. Thus, developing a new synthetic route for these particles and investigating the stability of magnetic materials are of great importance. Silica coating improves the chemical stability and electrical resistivity of the material. In this study, Ni3Fe (core) nanoparticles were prepared and the silica shell for this core was synthesized. The as-prepared X-ray diffraction (XRD) patterns and 300∘C annealed sample of Ni3Fe/SiO2 shows a characteristic hump in the low angle range confirming the presence of amorphous cristobalite phase of SiO2. The size of the Ni3Fe cluster in the Ni3Fe/SiO2 composite was estimated to be 8[Formula: see text]nm and 9[Formula: see text]nm, respectively, for the as-prepared and annealed samples. Vibrating sample magnetometer (VSM) measurements show the Ni3Fe to silica ratio to be 59:41. A small decrease in the coercivity value, is probably due to morphological changes associated with the coating. Scanning electron microscope (SEM) studies of the as-prepared and annealed Ni3Fe/SiO2 powder particles are of flowerlike morphology and in agglomeration. The impedance spectra were found at room temperature for the as-prepared samples.

Correlations, disorder, and multimagnon processes in terahertz spin dynamics of magnetic nanostructures: A first-principles investigation

Correlations, disorder, and multimagnon processes in terahertz spin dynamics of magnetic nanostructures: A first-principles investigation

Benzothiazole/Palladium immobilize on magnetic core-shell nanostructure with carbon and TiO2 shells as a novel and magnetically catalyst with high recoverability

This article describes the synthesis of a novel Benzothiazole/Palladium immobilized on Magnetic Core-Shell with Carbon and Titanium dioxide Shells (Fe3O4@Carbon@TiO2-benzothiazole/Pd) characterized and its catalytic application was investigated. The physicochemical properties of This nanocatalyst was characterized by several techniques such as Fourier transform infrared spectroscopy (FTIR), vibrating sample magnetometry (VSM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), thermal gravimetric analysis (TGA) and powder X-ray diffraction (PXRD). The advantages of this nanostructure were high thermal, chemical stability, and uniform size of nanoparticles. Fe3O4@Carbon@TiO2-benzothiazole/Pd core–shell was used as an efficient and powerful catalyst for preparation of Sonogashira coupling derivatives reaction with a high yield (62–97%), also was reused for eight cycles of reaction without significantly reducing activity.

Directional growth of iron oxide nanowires on a vicinal copper surface

Single-crystal magnetic nanostructures with well-defined shapes attract lots of interest due to their potential applications in magnetic and spintronic devices. However, development of methods allowing controlling their mutual crystallographic and geometric orientation constitutes a significant scientific challenge. One of the routes for obtaining such structures is to grow the materials epitaxially on naturally-structured supports, such as vicinal surfaces of single-crystal substrates. Iron oxides are among the most well-known magnetic materials which, depending on the phase, may exhibit ferro/ferri- or antiferromagnetic ordering. We have grown iron oxide nanowires on a Cu(410) single-crystal substrate faceted with molecular oxygen. Scanning tunneling microscopy and low energy electron diffraction revealed that the oxide grows in the [111] direction, along the step edges of the substrate and rotated by ±15° with respect to the [010] direction of copper atomic terraces (so that the the growing elongated structures are orientated parallel to each other). Notably, x-ray photoelectron spectroscopy confirmed that the nanowires represent the ferrimagnetic γ-Fe2O3 (maghemite) iron oxide phase, while micromagnetic simulations indicated that the wires are single-domain, with the easy magnetization axis orientated in-plane and along the long axis of the wire.

Mapping the transition from quasi-2D to 3D spin textures in NiFe nanomagnets

With increasing interest in understanding and mapping the spin textures within magnetic nanostructures, this work reports a study of the transition from quasi-2D magnetic behavior in thin-film ferromagnetic nanostructures to 3D thick-film nanostructures. A series of arrays of 480 × 250 nm2 elliptical Ni81Fe19 nanomagnets patterned using deep ultraviolet (DUV) lithography with thickness (t) ranging from 20 to 250 nm were studied. It is shown through magnetometry and micromagnetics that as the film thickness increases, the nanomagnets transition from effectively planar 2D magnets, with uniform spin textures extending through the film thickness for t ≤ 50 nm, to 3D nanomagnets with more complex non-uniform 3D spin textures for t ≥ 100 nm. These results demonstrate that the fabrication of thick-film nanomagnets via DUV lithography is a viable route to producing consistent 3D magnetic nanostructures for potential applications, such as magnonics.

Green synthesis of zinc oxide magnetic nanocomposite via zinc electroplating effluent: Its characterization and application as a photocatalyst

This study considered the green preparation, characterization, and investigation of the photocatalytic properties of zinc oxide magnetic nanostructure using electroplating industry effluent in the preparation. In this regard, the prepared structure was characterized by several common methods, including XRD, UV–Vis, FT-IR, DLS and VSM, and some of its properties were determined, including magnetic property, optical activity and surface charge. After determining the structure and confirming the optical activity of the prepared particles, its efficiency as a catalyst was evaluated in the photodegradation of methylene blue (MB) dye. Based on the results of the characterization of the structure of the ZnFe2O4 compound, the energy gap was calculated to be 3.46 eV. The results of DLS and VSM analyses showed that the prepared nanocomposite has average size, surface charge and magnetic properties equal to 65.5 nm, +95.94 mV and 8 emu/g, respectively. After confirming the photocatalytic properties of the prepared magnetic nanocomposite, the best operating conditions for the photocatalytic degradation of MB were determined to be 0.5 g of the photocatalyst, concentration of 10 mg/L of MB, pH equal to 9 and 1 mL of hydrogen peroxide (30 %) in 60 min (80 % degradation).

Spin-dependent dwell time in a magnetic nanostructure with zero average magnetic fields

ABSTRACT We calculate the dwell time for electron in a magnetic nanostructure with zero average magnetic fields, which is obtained by fabricating three nanosized ferromagnetic stripes on top or bottom of InAs/Al x In1–x As. A spin-dependent dwell time is found thanks to the spin–field interaction, which can be used to separate electron-spins in time dimension. Spin-polarised dwell time can be improved by properly patterning ferromagnetic stripes. Such a novel magnetic nanostructure can serve as a temporal spin splitter in the area of semiconductor spintronics.

A novel split PEC sensor based on magneto–optic nanostructure and photocurrent polarity switching strategy

BackgroundPhotoelectrochemical (PEC) sensors have attracted much attention due to their low cost, simple instrumentation and high sensitivity. However, conventional PEC sensors require layer–by–layer modification of the photoelectrode surface, which has the disadvantages of being time–consuming and unstable. In addition, complex interfering substances in real samples may lead to false–positive or false–negative detection results. It was thought that the above drawbacks could be eliminated by the construction of a polarity inversion PEC sensor. In this work, a magnetically separated PEC sensor was constructed for the detection of Carcinoembryonic antigen (CEA). ResultsDuring the experiment, the construction of the sensor was used for sensitive detection of CEA. In the experimental process, Fe3O4@SiO2@CdS, a semiconductor material with magnetic properties, was chosen as the substrate material, and ZnO/CuO was used as the marker on the DNA2 molecule, and a split magnetic separation PEC sensor was constructed, which was used to realize the sensitive detection of CEA. Eventually, the detection range of the sensor for CEA detection is 1–10000 pg/mL, with the detection limit of 0.34 pg/mL. Additionally, the PEC sensor has the advantages of high speed, high efficiency, high sensitivity, good specificity, and high stability. The sensing platform constructed in this work can also be extended to detect other targets, which provides a new idea for PEC sensing platforms. SignificanceIn this experiment, we developed a split PEC immunosensor based on magneto–optic nanostructure and photocurrent polarity switching strategy. Specifically, the proposed magnetic nanostructure Fe3O4@SiO2@CdS–DNA1 exhibits good paramagnetism and dispersion ability. By magnetic separation process, the PEC signals of opposite polarity can be obtained.

Heterogenization of Cobalt on Nanostructured Magnetic Covalent Triazine Framework: Effective Catalyst for Buchwald-Hartwig N-Arylation, Reduction, and Oxidation Reactions

Heterogenization of Cobalt on Nanostructured Magnetic Covalent Triazine Framework: Effective Catalyst for Buchwald-Hartwig N-Arylation, Reduction, and Oxidation Reactions

Elastic Liposomes Containing Calcium/Magnesium Ferrite Nanoparticles Coupled with Gold Nanorods for Application in Photothermal Therapy.

This work reports on the design, development, and characterization of novel magneto-plasmonic elastic liposomes (MPELs) of DPPC:SP80 (85:15) containing Mg0.75Ca0.25Fe2O4 nanoparticles coupled with gold nanorods, for topical application of photothermal therapy (PTT). Both magnetic and plasmonic components were characterized regarding their structural, morphological, magnetic and photothermal properties. The magnetic nanoparticles display a cubic shape and a size (major axis) of 37 ± 3 nm, while the longitudinal and transverse sizes of the nanorods are 46 ± 7 nm and 12 ± 1.6 nm, respectively. A new methodology was employed to couple the magnetic and plasmonic nanostructures, using cysteine as bridge. The potential for photothermia was evaluated for the magnetic nanoparticles, gold nanorods and the coupled magnetic/plasmonic nanoparticles, which demonstrated a maximum temperature variation of 28.9 °C, 33.6 °C and 37.2 °C, respectively, during a 30 min NIR-laser irradiation of 1 mg/mL dispersions. Using fluorescence anisotropy studies, a phase transition temperature (Tm) of 35 °C was estimated for MPELs, which ensures an enhanced fluidity crucial for effective crossing of the skin layers. The photothermal potential of this novel nanostructure corresponds to a specific absorption rate (SAR) of 616.9 W/g and a maximum temperature increase of 33.5 °C. These findings point to the development of thermoelastic nanocarriers with suitable features to act as photothermal hyperthermia agents.

CuPd bimetallic nanoparticles supported magnetic ionic liquid-derived N-doped carbon as a highly efficient heterogeneous catalyst for the one-pot oxidative multicomponent reactions

BackgroundMulticomponent reactions often rely on aldehydes as the reactants, limiting their widespread use. To enhance the versatility and scope of these reactions, aldehydes can be replaced with alcohols. MethodsIn this study, nitrogen-doped magnetic carbon nanostructures modified with imidazolium-based ionic liquid (Fe3O4@NC-IL) were prepared. These nanostructures were synthesized by a one-pot hydrothermal carbonization method using ferric chloride in the presence of glucose, urea, epichlorohydrin and 1-methylimidazole as carbon source, nitrogen source, linker and ionic liquid, respectively. Then, CuPd bimetallic nanoparticles were immobilized on the synthesized nanostructures by a wet chemical reduction process. Significant findingsThe catalytic activity of the nanostructures was evaluated in the oxidation of alcohol under base-free conditions. The results indicate that the CuPd bimetallic catalyst exhibited better catalytic performance than both Cu and Pd monometallic catalysts, suggesting a synergistic effect between copper and palladium. Also, a non-ionic liquid-based catalyst was synthesized and used in the model reaction to study the effect of imidazolium ionic liquid species on the catalytic activity. The results showed that these species enhanced the catalytic activity. Finally, the catalytic activity of the synthesized structure was evaluated through a one-pot tandem oxidative synthesis of dihydropyrimidinones (Biginelli reaction) and dihydropyridines (Hantzsch reaction).