Chitosan Nanoparticles Research Articles

Chitosan-fulvic acid nanoparticles enhance drought tolerance in maize via antioxidant defense and transcriptional reprogramming.

Nanoparticles are promising alternatives to synthetic fertilizers in the context of climate change and sustainable agriculture. Maize plants were grown under gradient concentrations (50 μM, 100 μM, 200 μM, 500 μM, and 1 mM) of chitosan (Ch), fulvic acid (FA) or chitosan-fulvic acid nanoparticles (Ch-FANPs). Based on the overall phenotypic assessment, 100 μM was selected for downstream experiments. Maize plants grown under this optimized concentration were thereafter subjected to drought stress by water withholding for 14 days. Compared to the individual performances, the combined treatment of Ch-FANPs supported the best plant growth over chitosan, fulvic acid, or sole watered plants and alleviated the adverse effects of drought by enhancing root and shoot growth, and biomass by an average 20%. In addition, Ch-FANPs-treated plants exhibited a significant reduction in hydrogen peroxide (H2O2) content (~10%), with a concomitant increase in ascorbate peroxidase (APX) activity (>100%) while showing a reduced lipid peroxidation level observed by the decrease in malondialdehyde (MDA) content (~100%) and low electrolyte leakage level. Furthermore, chlorophyll content increased significantly (>100%) in maize plants treated with Ch-FANPs compared to Ch or FA and control in response to drought. The expression of drought-induced transcription factors, ZmDREB1A, ZmbZIP1, and ZmNAC28, and the ABA-dependent ZmCIPK3 was upregulated by Ch-FANPs. Owing to the above, Ch-FANPs are proposed as a growth-promoting agent and elicitor of drought tolerance in maize via activation of antioxidant machinery and transcriptional reprogramming of drought-related genes.

Films based on TEMPO-oxidized chitosan nanoparticles: Obtaining and potential application as wound dressings

A series of novel films based on TEMPO-oxidized chitosan nanoparticles were prepared by casting method. Fourier transform infrared spectroscopy (FTIR) was employed to ascertain the chemical structure of TEMPO-oxidized chitosan. The surface morphology of the TEMPO-oxidized chitosan nanoparticles was analyzed by atomic force microscopy (AFM). The physicochemical (area density, thickness, iodine sorption, roughness), functional (moisture sorption, liquid absorption capacity, weight loss upon contact with the liquid, and water vapor transmission rate), antibacterial, and antioxidant properties of films based on TEMPO-oxidized chitosan nanoparticles were also investigated. The physicochemical properties of the films varied widely: area density ranged from 77.83 ± 0.06 to184.46 ± 0.05 mg/cm2, thickness varied between 80.5 ± 1.6 and 200.5 ± 1.6 μm, iodine sorption spanned from 333.7 ± 2.1 to166.4 ± 2.2 mg I2/g, and roughness ranged from 4.1 ± 0.2 to 5.6 ± 0.3 nm. Similarly, the functional properties also varied significantly: moisture sorption ranged from 4.76 ± 0.03 to 9.62 ± 0.11 %, liquid absorption capacity was between 129.04 ± 0.24 and 159.33 ± 0.73 % after 24 h, weight loss upon contact with the liquid varied between 31.06 ± 0.35 and 45.88 ± 0.58 % after 24 h and water vapor transmission rate ranged from 1220.10 ± 2.91to1407.77 ± 5.22 g/m2 day. Despite the wide variations in physicochemical and functional properties, all films showed maximum bacterial reduction of Staphylococcus aureus and Escherichia coli, although they exhibited low antioxidant activity. The results suggest that the films could be effectively utilized as antibacterial wound dressings.

Histological changes in the liver of mice infected with Schistosoma mansoni and treated with chitosan nanoparticles loaded with mefloquine

Histological changes in the liver of mice infected with Schistosoma mansoni and treated with chitosan nanoparticles loaded with mefloquine

WITHDRAWN: Folic acid Grafted, cell-penetrating peptide conjugated pH-sensitive hydrophobically modified Glycol chitosan nanoparticles for drug delivery in breast cancer

Nanocarriers are an outcome of the fast development of nanotechnology; however, delivering drugs to tumor sites effectively is still a major difficulty. A pH-responsive drug carrier with good cell penetration and targeting ability was developed to release the drug exactly to the cancer site and overcome these limitations.The drug carrier FA-TAT-HGCNPs/PTX, which is pH-responsive, uses folic acid (FA) and TAT peptide to deliver paclitaxel (PTX) for target folate-receptor-overexpressing breast cancer cells. 2-(diisopropylamino) ethyl methacrylate was connected to glycol chitosan (GC) to form HGCNPs. Then TAT and HGCNPs were conjugated and FA was grafted onto the HGCNPs’ hydroxyl group. Physicochemical characterizations of FA-TAT-HGCNPs was also evaluated. The maximum DLE and EE values of the FA-TAT-HGCNPs at pH 8.0 were 74.0 ± 2.22 % and 93.7 ± 2.8 %, respectively. FA-TAT-HGCNPs, for instance, showed stability during long-term storage and lyophilization while exhibiting pH-responsive dissociation properties. The synthesized drug carrier was characterized by FTIR, XRD, SEM, HRTEM, DLS, and Zeta analysis. MTT assay exhibited the high anticancer activity of the FA-TAT-HGCNPs/PTX against the MCF-7 cells, whereas drug-free ones are highly biocompatible. The pharmacokinetic results showed twice the bioavailability of FA-TAT-HGCNPs/PTX compared to HGCNPs/PTX. Unlike FA-HGCNPs/PTX, CLSM analysis showed that FA-TAT-HGCNPs/PTX had a significantly more efficient intracellular uptake in MCF-7 cells. These data have shown the transmembrane ability of TATpeptide,the targeting effects of folate decoration, and the synergistic interaction between them.According to these findings, PTX-loaded FA-TAT-HGCNPs offer a potentially effective nanoscale drug delivery system for the treatment of breast cancer.

Camellia Oleifera oil-loaded chitosan nanoparticles embedded in hydrogels as cosmeceutical products with improved biological properties and sustained drug release

Hydrogels based on poly(vinyl alcohol), silk sericin, and gelatin containing Camellia oleifera oil (CO)-loaded chitosan nanoparticles (CSNPs) were fabricated. The loading of CO into CSNPs was achieved by a two-step procedure, which included an oil-in-water emulsion and an ionic gelation method. SEM images of CO-loaded CSNPs illustrated the spherical shape with aggregation of the nanoparticles. The particle size and polydispersity index were 541–1089 nm and 0.39–0.65, respectively. The encapsulation efficiency and loading capacity were 3–16 % and 4–6 %, respectively. The gelatin/poly(vinyl alcohol)/sericin hydrogels were fabricated and incorporated with CO or CO-loaded CSNPs with different concentrations of CO-loaded CSNPs. All hydrogels demonstrated a porous structure. Besides, the hydrogels containing CO-loaded CSNPs showed a more controlled and sustained release profile than the hydrogels containing CO. Moreover, the hydrogels showed tyrosinase inhibition (9–13 %) and antioxidant activity (37–60 %). Finally, the hydrogels containing CO-loaded CSNPs were non-toxic to the Normal Human Dermal Fibroblasts and NCTC clone 929 cells, even at a high dosage of 50 mg/mL. As a result, these hydrogels exhibited excellent potential for use in cosmeceutical industries.

Evaluation of the efficiency of chitosan and silver nanoparticles in the treatment of lice experimental infestation in local chickens

Evaluation of the efficiency of chitosan and silver nanoparticles in the treatment of lice experimental infestation in local chickens

An In-Vitro Study of the Cytotoxicity of Chitosan Nanoparticles-Containing Orthodontic Primer

Background: Demineralization is an anticipated side effect of fixed orthodontic treatment. Incorporating antimicrobial compounds into orthodontic adhesive material may be an effective method for averting white spots. The objective of this study was to evaluate the cytotoxicity of an orthodontic primer modified with varying quantities of chitosan nanoparticles. Materials and methods: 0%, 1%, 5%, and 10% concentrations of Chitosan nanoparticles have been combined with Transbond TM XT primer. Three discs of eight millimeters in diameter and two millimeters in thickness were constructed for each group, for a total of twelve discs. Results: included the application of scanning electron microscopy (SEM) and X-ray diffraction (XRD) to confirm the Nano powder's properties. The data was statistically examined using one-way analysis of variance (ANOVA), and the results indicated statistically non-significant differences between groups (p˃0.05). In conclusion, the addition of chitosan nanoparticles to the orthodontic adhesive system's primer exhibited an acceptable level of cytotoxicity and was within the appropriate ISO limits (70% cell viability).

An intelligent controlled release hydrogel with photothermal effect for the treatment of bone defects

To solve the difficulty of natural healing in patients with severe bone defects, and the challenges of insufficient autologous bone graft material and large incisions in conventional surgery, we were designed an intelligent co-regulated hydrogel system with NIR response. The goal is to be able to prevent inflammation and bacterial adhesion, thereby promoting repair and development of the bone defect area. The hydrogel system consisted of hyaluronic acid, carboxymethyl chitosan and Pht-loaded PDA-encapsulated ZIF-8 NPs (Pht@ZIF-8@PDA) by Schiff base reaction. Compared to high-temperature photothermal therapy (PTT), which destroyed surrounding healthy cells, the present study was based on a new strategy of mild photothermal therapy (42.5 ± 1.2 °C) and leaded to a better promotion of osteogenesis. NIR activated the photothermal properties of PDA in scaffolds, intelligently released Pht and Zn2+, inhibited Escherichia coli and Staphylococcus aureus (inhibition rate ≥ 96 %), and promoted bone regeneration in the rat model. Meanwhile, it could promote bone regeneration by upregulating osteogenic factors and stimulating the expression of proteins related to BMP/SMAD signaling pathway. The research highlights the potential applications of synergistically modulated hydrogels, which opens up a new application path for this material in bone tissue engineering, regenerative medicine, and other related fields.

Vanillic Acid Nanocomposite: Synthesis, Characterization Analysis, Antimicrobial, and Anticancer Potentials.

Recently, nanoparticles have received considerable attention owing to their efficiency in overcoming the limitations of traditional chemotherapeutic drugs. In our study, we synthesized a vanillic acid nanocomposite using both chitosan and silver nanoparticles, tested its efficacy against lung cancer cells, and analyzed its antimicrobial effects. We used several characterization techniques such as ultraviolet-visible spectroscopy (UV-Vis), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDAX), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) to determine the stability, morphological characteristics, and properties of the biosynthesized vanillic acid nanocomposites. Furthermore, the vanillic acid nanocomposites were tested for their antimicrobial effects against Escherichia coli and Staphylococcus aureus, and Candida albicans. The data showed that the nanocomposite effectively inhibited microbes, but its efficacy was less than that of the individual silver and chitosan nanoparticles. Moreover, the vanillic acid nanocomposite exhibited anticancer effects by increasing the expression of pro-apoptotic proteins (BAX, Casp3, Casp7, cyt C, and p53) and decreasing the gene expression of Bcl-2. Overall, vanillic acid nanocomposites possess promising potential against microbes, exhibit anticancer effects, and can be effectively used for treating diseases such as cancers and infectious diseases.

Novel Biological-Based Strategy for Synthesis of Green Nanochitosan and Copper-Chitosan Nanocomposites: Promising Antibacterial and Hematological Agents.

Two novel samples of nanoparticles based on chitosan were greenly synthesized using pomegranate peel extract. The extract served as a nanoparticle precursor, facilitating the precipitation of nanosized chitosan through the ionic gelation method. Additionally, by mixing the green chitosan nanoparticles with copper ions, a nanoscale composite of chitosan and copper oxide was also produced. Structural and morphological investigations (FTIR, XRD, SEM, EDX, and TGA analyses) were performed for greenly synthesized chitosan nanoparticles and their copper oxide composite to determine all the significant characteristics of those nanoparticles. In addition, both samples were tested using some biological investigations, such as antimicrobial activity and hematological effects. The antimicrobial tests yielded promising results for both the green chitosan nanoparticles and the CuO composite when tested using two bacterial strains and two fungal strains. Moreover, the results showed that using a similar concentration of both green-based chitosan samples resulted in a slightly larger inhibition zone and a lower minimum inhibition concentration (MIC) for the copper oxide chitosan composite compared to the chitosan nanoparticles for all microorganisms included in the test. The mean count of blood components (RBCs and platelets), clotting time, and cholesterol levels in three different blood samples were used to indicate the hematological activity of both greenly synthesized nanoparticles. The results verified a slight reduction in blood component count after the addition of green chitosan nanoparticles, but the chitosan copper oxide composite did not have a noticeable effect on the three blood samples. The chitosan nanoparticles were able to cause a considerable reduction in clotting time and cholesterol levels for all blood samples, thus acting as procoagulants. However, the mixing of CuO with chitosan nanoparticles prolonged the rate of clotting in blood samples from hypercholesteremic individuals, and thus, the mixture acted as an anticoagulant agent.

Chlorogenic acid/carboxymethyl chitosan nanoparticle-assisted biomultifunctional hyaluronic acid-based hydrogel scaffolds for burn skin repair

Burns are a prevalent type of injury worldwide, affecting tens of millions of people each year and significantly impacting the physical and psychological well-being of patients. Consequently, prompt treatment of burn wounds is imperative, with oxidative stress and excessive inflammation identified as primary factors contributing to delayed healing. In recent years, there has been growing interest in in situ crosslinked multifunctional hydrogels as a minimally invasive approach for personalized treatment delivery. To address these, a photocrosslinkable methacryloyl hyaluronic acid hydrogel scaffold embedded with chlorogenic acid/carboxymethyl chitosan nanoparticles (CGA/CMCS-HAMA, CCH), was developed for the treatment of burn wounds. The hydrogel prepared degraded by over 50 % by day 20, demonstrating stability and meeting the therapeutic requirements for burn wounds. Leveraging the extracellular matrix-like properties of HAMA and the antioxidant capabilities of CGA/CMCS NPs, this hydrogel demonstrates the ability to locally and continuously scavenge ROS and inhibit lipid peroxidation, inhibiting ferroptosis. Moreover, hydrogels well modulate the expression of macrophage- and fibroblast-associated inflammatory factors. Additionally, the hydrogel promotes cell adhesion and migration, further supporting the healing process. Overall, this innovative approach offers a safe and promising solution for burn wound treatment, addressing drug breakthrough and safety concerns while being adaptable to various irregular wound types.

Development and optimization of electrosprayed vitamin C - chitosan nanoparticle: A CCD-RSM approach and characterization of bioactive encapsulant

Electrospraying for Vitamin C (VC) encapsulation in Chitosan (Cs) nanoparticles was investigated and particle size, zeta potential, loading capacity (LC%) and encapsulation efficiency (EE%) were examined. Cs concentration (1–2% w/v) and voltage (21-25 kV) were varied with VC (0.25–0.75 w/w Cs). Twenty experiments in a face-centered CCD-RSM design were evaluated. ANOVA suggested voltage and Cs concentration as significant factors for particle size and VC content affected zeta, LC and EE%. RSM proposed optimum processing parameter at 2% Cs, 0.746 VC: Cs mass ratio and 21 kV voltage with 251.1 ± 59.03 nm particle size, 36.6% LC and an EE of 85.42%. Encapsulated particles were subjected to release behaviour, antioxidant property and analyzed through FTIR, DSC and XRD. Encapsulated VC had better antibacterial properties than Cs nanoparticles, and comparable VC retention in apple juice showed its effectiveness. Overall, nanoencapsulation of VC using electrospraying was successfully developed to be used in numerous food processing applications.

Chitosan: An overview of biological activities, derivatives, properties, and current advancements in biomedical applications

The second and most often utilized natural polymer is chitosan (CS), a naturally existing amino polysaccharide that is produced by deacetylating chitin. Numerous applications have been the subject of in-depth investigation due to its non-hazardous, biologically compatible, and biodegradable qualities. Chitosan's characteristics, such as mucoadhesion, improved permeability, controlled release of drugs, in situ gelation process, and antibacterial activity, depend on its amino (-NH2) and hydroxyl groups (-OH). This study examines the latest findings in chitosan research, including its characteristics, derivatives, preliminary research, toxic effects, pharmaceutical kinetics and chitosan nanoparticles (CS-NPs) based for non-parenteral delivery of drugs. Chitosan and its derivatives have a wide range of physical and chemical properties that make them highly promising for use in the medicinal and pharmaceutical industries. The characteristics and biological activities of chitosan and its derivative-based nanomaterials for the delivery of drugs, therapeutic gene transfer, delivery of vaccine, engineering tissues, evaluations, and other applications in medicine are highlighted in detail in the current review. Together with the techniques for binding medications to nanoparticles, the application of the nanoparticles was also dictated by their physical properties that were classified and specified. The most recent research investigations on delivery of drugs chitosan nanoparticle-based medication delivery methods applied topically, through the skin, and through the eyes were considered.

Surface Modifications of Superparamagnetic Iron Oxide Nanoparticles with Chitosan, Polyethylene Glycol, Polyvinyl Alcohol, and Polyvinylpyrrolidone as Methylene Blue Adsorbent Beads.

Due to the negative impacts the dye may have on aquatic habitats and human health, it is often found in industrial effluent and poses a threat to public health. Hence, to solve this problem, this study developed magnetic adsorbents that can remove synthetic dyes like methylene blue. The adsorbent, in the form of beads, consists of a polymer blend of chitosan, polyethylene glycol, polyvinyl alcohol, polyvinylpyrrolidone, and superparamagnetic iron oxide nanoparticles (average size of 19.03 ± 4.25 nm). The adsorption and desorption of MB from beads were carried out at pH values of 7 and 3.85, respectively. At a concentration of 9 mg/L, the loading capacity and the loading amount of MB after 5 days peaked at 29.75 ± 1.53% and 297.48 ± 15.34 mg/g, respectively. Meanwhile, the entrapment efficiency of MB reached 29.42 ± 2.19% at a concentration of 8 mg/L. The cumulative desorption capacity of the adsorbent after 13 days was at its maximum at 7.72 ± 0.5%. The adsorption and desorption kinetics were evaluated.

Surface Modifications of Silver Nanoparticles with Chitosan, Polyethylene Glycol, Polyvinyl Alcohol, and Polyvinylpyrrolidone as Antibacterial Agents against Staphylococcus aureus, Pseudomonas aeruginosa, and Salmonella enterica.

In medicine, the occurrence of antibiotic resistance was becoming a critical concern. At the same time, traditional synthesis methods of antibacterial agents often lead to environmental pollution due to the use of toxic chemicals. To address these problems, this study applies the green synthesis method to create a novel composite using a polymer blend (M8) consisting of chitosan (CS), polyethylene glycol (PEG), polyvinyl alcohol (PVA), polyvinylpyrrolidone (PVP), and silver nanoparticles. The results show that the highest ratio of AgNO3:M8 was 0.15 g/60 mL, which resulted in a 100% conversion of Ag+ to Ag0 after 10 h of reaction at 80 °C. Hence, using M8, Ag nanoparticles (AgNPs) were synthesized at the average size of 42.48 ± 10.77 nm. The AgNPs' composite (M8Ag) was used to inhibit the growth of Staphylococcus aureus (SA), Pseudomonas aeruginosa (PA), and Salmonella enterica (SAL). At 6.25% dilution of M8Ag, the growth of these mentioned bacteria was inhibited. At the same dilution percentage of M8Ag, PA was killed.

Gene Therapy with Chitosan Nanoparticles: Modern Formulation Strategies for Enhancing Cancer Cell Transfection.

Gene therapy involves the introduction of exogenous genetic material into host tissues to modify gene expression or cellular properties for therapeutic purposes. Initially developed to address genetic disorders, gene therapy has expanded to encompass a wide range of conditions, notably cancer. Effective delivery of nucleic acids into target cells relies on carriers, with non-viral systems gaining prominence due to their enhanced safety profile compared to viral vectors. Chitosan, a biopolymer, is frequently utilized to fabricate nanoparticles for various biomedical applications, particularly nucleic acid delivery, with recent emphasis on targeting cancer cells. Chitosan's positively charged amino groups enable the formation of stable nanocomplexes with nucleic acids and facilitate interaction with cell membranes, thereby promoting cellular uptake. Despite these advantages, chitosan-based nanoparticles face challenges such as poor solubility at physiological pH, non-specificity for cancer cells, and inefficient endosomal escape, limiting their transfection efficiency. To address these limitations, researchers have focused on enhancing the functionality of chitosan nanoparticles. Strategies include improving stability, enhancing targeting specificity, increasing cellular uptake efficiency, and promoting endosomal escape. This review critically evaluates recent formulation approaches within these categories, aiming to provide insights into advancing chitosan-based gene delivery systems for improved efficacy, particularly in cancer therapy.

A Comprehensive Review of Advances in Nanoparticle-Based Cancer Therapy

A promising method for treating different kinds of cancer is cancer therapy based on nanoparticles. The goal of this thorough analysis is to present a summary of the most current developments in cancer treatment using nanoparticles and discuss the different kinds of nanoparticles and how they might be used to enhance therapeutic efficacy and deliver anticancer medications. These include mesoporous dendritic silica nanospheres, gold nanoparticles, and chitosan nanoparticles. The review stresses the significance of stability and dynamic interfaces in attaining effective drug administration and addresses the difficulties related to medication release and degradation in nanoparticle-based therapy. Moreover, it investigates the immune reactions, such as dendritic cell maturation and immune response activation, that are brought on by nanoparticle-based therapy. Overall, this thorough analysis highlights the promise of these cutting-edge strategies for enhancing the effectiveness of cancer treatment and offers insightful information about the developments in nanoparticle-based cancer therapy. The information provided in this study contributes to the growing corpus of information in the field of nanomedicine and suggests future avenues for investigation and development of treatments utilizing nanoparticles to treat cancer

Evaluating the antibacterial effect of meropenem-loaded chitosan/sodium tripolyphosphate (TPP) nanoparticles on Acinetobacter baumannii isolated from hospitalized patients

BackgroundAcinetobacter baumannii is a health threat due to its antibiotic resistance. Herein, antibiotic susceptibility and its association with the Toxin-antitoxin (TA) system genes in A. baumannii clinical isolates from Iran were investigated. Next, we prepared meropenem-loaded chitosan nanoparticles (MP-CS) and investigated their antibacterial effects against meropenem-susceptible bacterial isolates.MethodsOut of 240 clinical specimens, 60 A. baumannii isolates were assessed. Antibiotic resistance of the isolates against conventional antibiotics was determined alongside investigating the presence of three TA system genes (mazEF, relBE, and higBA). Chitosan nanoparticles were characterized in terms of size, zeta potential, encapsulation efficiency, and meropenem release activity. Their antibacterial effects were assessed using the well diffusion method, minimum inhibitory concentration (MIC), and colony-forming unit (CFU) counting. Their cytotoxic effects and biocompatibility index were determined via the MTT, LDH, and ROS formation assays.ResultsAmpicillin, ceftazidime, and colistin were the least effective, and amikacin and tobramycin were the most effective antibiotics. Out of the 60 isolates, 10 (16.7%), 5 (8.3%), and 45 (75%) were multidrug-resistant (MDR), extensively drug-resistant (XDR), and pandrug-resistant (PDR), respectively. TA system genes had no significant effect on antibiotic resistance. MP-CS nanoparticles demonstrated an average size of 191.5 and zeta potential of 27.3 mV alongside a maximum encapsulation efficiency of 88.32% and release rate of 69.57%. MP-CS nanoparticles mediated similar antibacterial effects, as compared with free meropenem, against the A. baumannii isolates with significantly lower levels of meropenem. MP-CS nanoparticles remarkably prevented A549 and NCI-H292 cell infection by the A. baumannii isolates alongside demonstrating a favorable biocompatibility index.ConclusionAntibiotic-loaded nanoparticles should be further designed and investigated to increase their antibacterial effect against A. baumannii and assess their safety and applicability in vivo settings.

Calendula Oil Associated Dexibuprofen Nanoformulation Transdermal Patches: Formulation and Characterization

Objectives: To prepare and characterize the nanoparticle-based topical formulations of dexibuprofen in combination with calendula oil to enhance the topical anti-inflammatory effect. Methods: Chitosan and tri poly phosphate (TPP) were used to prepare nanoparticles developed utilizing the ionotropic gelation technique and analyzed by scanning electron microscope (SEM) and the ZS. Solvent casting was used to prepare the transdermal medication delivery system for the chitosan nanoparticle formulation. Results: Results revealed that nanoparticles were between the sizes of 267.3 nm. This particle size may enhance the drug’s solubility and penetration through the skin. These patches containing chitosan nanoparticles were produced utilizing polymer combinations - HPMC, chitosan, and PEG400 with tween80 as plasticizers. Accompanying the rise in hydrophilic polymer content came an increase in the rate of medication release via the patch. Conclusion: Transdermal patch - F3 released the drug reasonably well.

Separation and purification of hyaluronic acid by [formula omitted] nano and micro particles coated with chitosan and silica

Hyaluronic acid (HA), a glycosaminoglycan, is comprised of alternating units of D-glucuronic acid and N-acetylglucosamine. This compound harbors numerous biomedical applications, including its use in pharmaceuticals, wound healing, osteoarthritis treatment, and drug delivery. Its unique composition and exceptional features, such as its high water-absorbing and retaining capacity, have also led to its use in the cosmetics industry. The employment of this biopolymer has given rise to an escalation in the request for its manufacture. The present investigation has explored the correlation between hyaluronic acid and chitosan and silica for the purpose of separation. Consequently, Iron oxide magnetic nano particles and micro particles were produced via co-precipitation method and were layered with chitosan and silica to purify the hyaluronic acid from the fermentation broth that was generated by Streptococcus Zooepidemicus. The size distribution and zeta potentials of the two kinds of particles were gauged with the aid of a dynamic laser light scattering apparatus and zeta potential meter (Malvern, Zeta master) respectively. The confirmation of the chemical structure of the Fe3O4 nanoparticles and Fe3O4 particles conjugated with chitosan and silica was accomplished through the utilization of Fourier Transform Infrared Spectroscopy (FT-IR). Protein contamination was thoroughly characterized by means of sodium dodecyl-sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and Nanodrop 2000/2000c spectrophotometers protein estimation method. The maximum HA adsorption capacity, under optimal pH conditions of 4, was determined to be 87 mg/g, 112 mg/g, 51 mg/g, and 44 mg/g for Fe3O4 −chitosan nanoparticle, Fe3O4 −chitosan micro particle, Fe3O4 −silica microparticle, and Fe3O4 −silica nanoparticle, respectively.