Multiple-input Multiple-output Antenna System Research Articles

Twelve-Element MIMO Wideband Antenna Array Operating at 3.3 GHz for 5G Smartphone Applications

This work presents a 12-element multiple-input–multiple-output (MIMO) wideband antenna array for mobile smartphones. The antenna element is mainly composed of two parts, greatly improving the antenna array bandwidth: one is a meandering, looped radiating element and the other is a U-shaped slot. For the antenna element design, the meandering, looped radiating element measures 12.95 × 6 mm2, while the U-shaped slot has a size of 15 × 3 mm2. Meanwhile, the reflection coefficient indicates that the designed antenna array operates at 3.3 GHz with a bandwidth of 500 MHz; the transmission coefficient shows that the isolation between the antenna elements is better than 12 dB. In addition, more antenna array performances are presented, including nearly omnidirectional radiation characteristics, antenna efficiency ranging from approximately 17 to 60%, envelope correlation coefficients (ECCs) below 0.065, and diversity gain (DG) values of the MIMO antenna system close to 10 dB. The measurement results are highly consistent with the simulation results of the designed wideband antenna array, indicating its great potential for future practical engineering applications.

Highly isolated pin-loaded millimeter wave MIMO antenna array system for IoT-based smart environments

The Internet of Things (IoT) based wireless devices are mainly designed for rapid indoor millimeter-wave (mmW) communication systems. These systems often require high gain mmW antennas within a wideband MIMO framework. This work presents a high performance quad element pin-loaded multiple-input multiple-output (MIMO) antenna array for mmW communications that can be utilized within IoT-enabled smart environment. The novelty of these antenna elements lies in the incorporation of unique flower-shaped slots and shorting pins in each patch of a two-element antenna array. Moreover, a four-port MIMO antenna system is created by arranging the two element arrays in an orthogonal configuration. By employing this pattern diversity technique and incorporating shorting pins in each individual element, the adverse mutual coupling effects between adjacent elements are effectively mitigated. Experimental validation of the MIMO array prototype confirms the minimum isolation of 34 dB and high port isolation of 72 dB over the operating bandwidth from 26.31–30.25 GHz (3.96 GHz). Notably, these features together with lower correlation values and higher diversity gain, make it a good choice for mmW-based IoT devices in smart environments.

Design of a Compact Multiband Monopole Antenna with MIMO Mutual Coupling Reduction.

In this article, the authors present the design of a compact multiband monopole antenna measuring 30 × 10 × 1.6 mm3, which is aimed at optimizing performance across various communication bands, with a particular focus on Wi-Fi and sub-6G bands. These bands include the 2.4 GHz band, the 3.5 GHz band, and the 5-6 GHz band, ensuring versatility in practical applications. Another important point is that this paper demonstrates effective methods for reducing mutual coupling through two meander slits on the common ground, resembling a defected ground structure (DGS) between two antenna elements. This approach achieves mutual coupling suppression from -6.5 dB and -9 dB to -26 dB and -13 dB at 2.46 GHz and 3.47 GHz, respectively. Simulated and measured results are in good agreement, demonstrating significant improvements in isolation and overall multiple-input multiple-output (MIMO) antenna system performance. This research proposes a compact multiband monopole antenna and demonstrates a method to suppress coupling in multiband antennas, making them suitable for internet of things (IoT) sensor devices and Wi-Fi infrastructure systems.

High-performance MTM inspired two-port MIMO antenna structure for 5G/IoT applications

Abstract This study thoroughly investigates a two-port multiple-input multiple-output (MIMO) antenna system tailored for 5G operation at 28 GHz. The proposed antenna is patched on a Rogers (RT5880) substrate with a relative permittivity of 2.2 and total size of 20×12×0.508 mm3. The mutual relationship between the radiating patches is refined using an H-shaped metamaterial structure to reduce the isolation to –55 dB. A MIMO configuration with attractive features is employed to reduce the envelope correlation coefficient (ECC) to about 0.00062 and the channel capacity loss (CCL) to about 0.006 bits/sec/Hz, while magnify the gain to about 9.39 dBi and the diversity gain (DG) to about 9.995. Additionally, it boasts a compact size with stable radiation pattern. The simulations of the MIMO antenna are executed using CST microwave studio, subsequently validated with Advanced Design System (ADS) for an equivalent circuit model, then measured using Vector Network Analyzer. Discrepancies between measured and simulated results were analyzed, with observed variations attributed to cable losses and manufacturing tolerances. Despite these challenges, a comprehensive comparison with prior research highlights the notable advantages of the proposed design, positioning it as a compelling solution for 5G applications.

High Isolation MIMO Antenna System for 5G N77/N78/N79 Bands.

This paper presents a symmetric dual-band multiple-input multiple-output (MIMO) antenna system tailored for fifth-generation (5G) mobile terminals. Operating within the 5G frequency bands N77/N78 (3.4-3.6 GHz) and N79 (4.8-5.0 GHz), the proposed MIMO system achieves high isolation between adjacent antenna elements through slotting and self-decoupling technologies. Antenna elements are strategically positioned on two frames perpendicular to the smartphone's main board. Each antenna element integrates a rectangular microstrip radiator on the inner frame surface, accompanied by a grounded rectangular ring on the outer frame surface. The feed line, situated atop the main board, connects to an external SMA connector located at the main board's bottom. Measurement results reveal isolations exceeding 20 dB for the lower band and 24 dB for the higher band. The fabricated and tested MIMO antenna system demonstrates excellent agreement between simulation and measurement outcomes.

Fractal Engineering Integration in Antenna Arrays: A Comparative-review for Advanced Transceiver Systems with 5G/IoT Connectivity

The growing demand for space-efficient antennas compatible with portable electronic gadgets inspired the integration of recursively iterated fractal geometries (characterized by self-similarity, space-filling, and multiband/wideband capabilities) in antenna designs. Therefore, this article conducts an extensive survey on fractal-based single-port and multi-port patch antenna designs with multiband and ultrawideband characteristics for their implementation in 5G/IoT (Internet of Things) devices. The survey begins with a basic overview of fractal geometries and the iterated function system (IFS) technique employed for their generation. Further, it highlights the limitation of multipath fading prevalent in single-port antenna arrays that can be overcome by adopting multiple-input multiple-output (MIMO) technology. The MIMO antenna systems are vital for 5G networks to enhance data transmission rate, network capacity, and system reliability. Apart from these admirable attributes, the closely packed antenna elements in the MIMO configuration result in a severe mutual coupling. To address this limitation, various isolation enhancement techniques developed by distinguished researchers are thoroughly discussed in this article, detailing their merits and demerits. At last, this article portrays diverse band-notch structures integrated into the antenna designs to eradicate the existing interfering narrow bands in the ultrawideband (UWB) spectrum. The underlying reason for conducting this survey is to aid antenna designers and academicians with a thorough knowledge of distinct fractal geometries, various isolation improvement approaches, and band-notch techniques on a single platform, desired for designing 5G/IoT-based antenna systems.

Wireless powered NOMA-based cognitive radio for 6G networks

The need for physically charging mobile devices is anticipated to become a thing of the past in the not-too-distant future. In this paper, a novel approach for wireless-powered mobile devices is presented, which is based on non-orthogonal multiple access (NOMA) and multi-user multiple-input multiple-output (MU-MIMO) antenna systems. The proposed method is specifically designed for use in a cognitive underlay radio (CR) scenario, where the primary network requires a certain quality of service (QoS). Meanwhile, secondary network users can download their data using the same spectrum. The main objective of this paper is to maximize the sum rate of the secondary network. We have optimized a joint beamforming vector for both primary and secondary networks and a time-switching coefficient for energy harvesting and information transfer to achieve this objective. The initial problem formulation was non-convex, requiring the implementation of various techniques to ensure an efficient and low-complexity algorithm. To this end, we employed semi-definite programming, successive convex approximation, and alternating optimization. The proposed NOMA-based solution outperforms the TDMA-based benchmark scheme regarding sum data rate, specifically in the low transmit power region.

A 4-Element UWB MIMO Antenna System with High Isolation Performance

This paper proposes a 4-element multiple-input multiple-output (MIMO) antenna system, which is intended for ultra-wideband (UWB) applications. The antenna has a dimension of 92 × 70 × 1.6 mm3. It achieves element isolation via the defected ground structure (DGS) and symmetric E-shaped branch structures design. The realized operating bandwidth is from 3 GHz to 18 GHz, with 15 dB isolation within the whole wide band. The envelope correlation coefficient (ECC) is less than 0.01 with diversity gain (DG) greater than 9.95. The prototype is fabricated and measured to verify its potential applications for UWB MIMO communication.

Miniaturized Multi-band Millimeter-Wave Vivaldi Antenna with Performance Optimization at 28 GHz for 5G MIMO Applications

A novel design for Vivaldi antenna is introduced to operate in more than one frequency band in the millimeter-wave spectrum range with high gain. The proposed Vivaldi antenna is planar and printed on both sides of Rogers 3003C flexible substrate. A parasitic annular ring is added to each arm of the Vivaldi antenna to adjust the impedance matching and maximize the gain. The dimensions of the antenna are optimized using the CST microwave simulator to obtain the best impedance matching bandwidths and highest gain in a compact-size antenna. The 28-GHz band is then selected due to its importance to enhance the gain and improve the operating bandwidth for the 5G applications. A gain of 10 dBi and bandwidth of 6.1 GHz are obtained at 28 GHz. A multiple-input multiple-output (MIMO) antenna system is then designed for pattern diversity for the fifth-generation mobile applications. The performance of the MIMO system is evaluated regarding the envelope correlation coefficient and the diversity gain showing good results. The optimized antenna is fabricated and its return loss and radiation patterns are measured showing good consent between the simulations and the practical work. The MIMO antenna system is also fabricated, and its performance is measured regarding the reflection and coupling coefficients showing good agreement between the measurements and simulations.

Eight element dual-band MIMO array antenna for modern fifth generation mobile phones

In this paper, an eight-element multiple-input multiple-output (MIMO) antenna with dual-band response is designed for fifth-generation (5G) mobile devices. The proposed MIMO systems’ radiators are placed in the inner side frame of the mobile phone board, which has a size of 150 × 7 mm2, each spanning an area of 21.5 × 5.5 mm2. All eight antenna elements are symmetrical to each other and are fed with a 50Ω feeding line. The proposed MIMO antenna covers two distinct 5G frequency bands, i.e., 3.5 and 5.3 GHz, and offers −6 dB impedance bandwidth in a frequency range of 3.4–3.65 and 4.8–5.8 GHz. It is worth mentioning that an isolation of more than 18 dB is achieved over the bands of interest without the use of a decoupling network. Similarly, the proposed MIMO antenna achieved an efficiency of more than 60% across the bands, an envelope correlation coefficient (ECC) below 0.04, antenna gain better than 5 dBi, a mean effective gain (MEG) between any two radiating elements found to be better than 3 dB, and a channel capacity (CC) above 38.5 bps/Hz, which is three times better compared to a 2 × 2 MIMO antenna system. Upon fabrication and testing of the proposed antenna, it was noted that the measured results are in good agreement with the simulated data. Furthermore, the MIMO antenna response was simulated in the presence of a human user and shows how the user phantom affects the radiation characteristics of the MIMO antenna. These performance parameters showed promising results, making the proposed design a better option to be deployed in modern-day 5G communication application scenarios, specifically cell phones.

Selective Metallization on 3D Substrates for MIMO Antennae

Multiple-input multiple-output (MIMO) antenna technology owes its low weight and energy-saving electronic applications to the use of polymer substrates. Applying metallization to obtain conductive substrates involves spraying untreated molds with a gel to form a temporary protective coating. The coating is then partially removed with a laser to expose areas for metallization. After that, the exposed areas are modified with a palladium-tin (Pd-Sn) colloidal catalyst to enhance the adhesion between the insulating surface and copper deposition. It’s with these three steps that the modified areas become selective to metallization. It’s observed that copper deposited incessantly at a high speed of 5 μm/hr after above treatment, and formed a dense layer with a low resistivity. The conductive patterns plated on the 3D substrate render the MIMO antenna system applicable to wireless local area network (WLAN) with two switchable frequencies, as evidenced by the simulation tests in which the antennae had ECC values below 0.2, a VSWR of 3 to 1, and a radiation efficiency around 50% at 2.4 GHz and 37% at 5.8 GHz. The electroless plating technology used above adds to a duplicable MIMO-antenna manufacturing process of low temperature and cost.

Side-edge dual-band MIMO antenna system for 5G cellular devices

An eight-element multiple-input multiple-output (MIMO) antenna system is presented for two distinct 5G allocated bands, i.e., 3.5 and 5.2 GHz. The MIMO radiating elements are printed on each side of the mobile phone chassis, having dimensions of 150 × 7 mm2, while the microstrip feeding lines fed through a coaxial connector are printed on the main board, having dimensions of 150 × 75 mm2. The single element of the MIMO antenna system consists of a modified slotted rectangular patch radiator. One slot is composed of a hybrid shape (which consists of both T- and L-shaped patterns), and the second one is a typical inverted L-shaped slot. The placement of slots generated two different current paths, which led to dual-band response at 3.5 and 5.2 GHz. In the MIMO configuration, the arrangement of radiating elements ensures pattern diversity characteristics, which are useful for MIMO systems. Furthermore, the MIMO antenna system offers a minimum isolation of 13.5 and 21.5 dB at 3.5 and 5.2 GHz, respectively. From the results, it is also observed that the radiating elements offer a radiation efficiency of ≥70% at 3.5 GHz, while at 5.2 GHz, the radiation efficiency is noted to be >55% with acceptable gain. A comprehensive analysis of key performance parameters, e.g., envelope correlation coefficient (ECC), mean effective gain (MEG), and channel capacity (CC), was conducted, and it is noted that the proposed MIMO antenna system exhibits an ECC of less than 0.015, MEG of < −3 dB, and CC of 39.5 bps/Hz. In addition, the specific absorption rate (SAR) analysis of the proposed MIMO antenna was conducted and observed a value of 1.35 and 1.05 W/Kg at 3.5 and 5.2 GHz, respectively. To verify the computed results, a prototype of the proposed MIMO antenna was fabricated and subjected to thorough measurements. It was observed that the measured results satisfied the simulated data and aligned excellently with the measured data. Based on the performance of the proposed MIMO antenna, it became evident that the MIMO antenna structure can be used as a potential candidate for future fifth-generation (5G)-enabled smart phones.

A Novel Densely Packed 4 × 4 MIMO Antenna Design for UWB Wireless Applications.

In this article, a compact 4-port UWB (Ultra-Wide Band) MIMO (Multiple Input Multiple Output) antenna is proposed. A low profile FR-4 substrate is used as a dielectric material with the dimensions of 58 × 58 mm2 (0.52λ × 0.52λ) at 2.8 GHz and a standard thickness of 1.6 mm. The proposed design characterizes an impedance bandwidth starting from 2.8 to 12.1 GHz (124.1%). Each of the four elements of the proposed MIMO antenna configuration consists of a monopole antenna with PG (partial ground) that has a slot at its center. The corner of each patch (radiator) and ground slot are rounded for impedance matching. Each unit cell is in an orthogonal orientation, forming a quad-port MIMO antenna system. For reference, the partial ground of each unit cell is connected meticulously with the others. The simulated results of the proposed quad-port MIMO antenna design were configured and validated by fabrication and testing. The proposed Quad-port MIMO design has a 6.57 dBi peak gain and 97% radiation efficiency. The proposed design has good isolation below 15 dB in the lower frequency range and below 20 dB in the higher frequency range. The design has a measured ECC (Envelop Correlation Co-efficient) of 0.03 and DG (Diversity Gain) of 10 dB. The value of TARC (Total Active Reflection Coefficient) over the entire operating band is less than 10 dB. Moreover, the design maintained CCL (Channel Capacity Loss) < 0.4 bits/sec/Hz and MEG (Mean Effective Gain) < 3 dB. Based on the obtained results, the proposed design is suitable for the intended high data rate UWB wireless communication portable devices.

Compact eight-element MIMO antenna array for sub 6 GHz Mobile applications

A compact eight-element multiple-input multiple-output (MIMO) antenna array operating at the sub-6-GHz (LTE band 52) for the 5G handheld applications is proposed. The antenna array is realized by employing eight couple-fed slots etched on the ground plane of the MIMO antenna system. The size of the slot radiators excites the required operating bandwidth. A parametric analysis study of the effect of varying the size of the slot radiators on the ground plane is provided to give some insight into the operation of the proposed antenna system. The radiators are excited by 50-Ω strip lines. Rectangular-shaped slits are used as isolation structures to mitigate the mutual coupling effect between elements, resulting in a low Envelope Correlation Coefficient (ECC) of less than 0.1 at the operating bandwidth. The proposed MIMO antenna was fabricated and experimentally validated. The measured and simulated results are in good agreement. Other MIMO performance indicators, such as radiation patterns, Mean Effective Gain (MEG), and the proposed MIMO antenna system’s total efficiencies, are being analyzed. Measurements and simulation results are consistent, which shows that the proposed antenna is a good candidate for 5G applications in the LTE band 52.

An Ultra-Wide Band MIMO Antenna System with Enhanced Isolation for Microwave Imaging Applications.

This paper introduces a novel two-port ultra-wideband (UWB) multiple-input multiple-output (MIMO) antenna system with enhanced isolation characteristics. The antenna, designed on a thin 0.787 mm RO5880 substrate, achieves a compact form factor of 52 × 26 mm2 and offers a wide bandwidth of 9.2 GHz (2.3 GHz to 11.5 GHz) while meeting the VSWR 2:1 criterion. Notably, the proposed antenna demonstrates an impressive increase in isolation, up to 16 dB, through the integration of a shared radiator with small rectangular slots, effectively reducing interference and improving overall performance. Furthermore, a comprehensive analysis of additional MIMO performance parameters, including the envelope correlation coefficient (ECC) and diversity gain, confirms their satisfactory limits, validating the potential of the proposed UWB-MIMO antenna for various UWB applications. The time domain analysis of the UWB antenna is also analyzed, and results are found to be within satisfactory limits. Simulation and measurement results further support the practicality and effectiveness of the antenna design, highlighting its compact size, wide bandwidth, and enhanced isolation characteristics, positioning it as a promising solution for advanced UWB microwave imaging systems.

Two-element MIMO antenna system for multiband millimeter-wave, 5G mobile communication, Ka-band, and future 6G applications with SAR analysis

A two element multiband multiple-input multiple-output (MIMO) antenna system with low specific absorption rate is proposed for Ka-band space satellite, millimeter-wave (mm-wave), fifth-generation (5G), and future sixth-generation (6G) wireless communication applications. The essential characteristics of both 5G and future 6G communications can be fulfilled by the proposed MIMO antenna design. The proposed MIMO antenna system has significant advantage of covering four relevant and usable frequency bands, i.e., 16 GHz, 25.5 GHz, 28 GHz, and 32 GHz used for the above mentioned applications. The design of the presented antenna looks like a vertical Yagi-Uda antenna with L-shaped ladder. Moreover, two circular slots and a slotted vertical stub are etched in a partially shared ground. The complete electrical dimension of the presented antenna is 6.8 λ0×5.7λ0×0.068λ0, calculated at resonating frequency 25.5 GHz, where λ0 is wavelength in free space. The geometry of the presented antenna is fabricated using Rogers RO4350TM with dielectric constant (ϵr) of 3.48, a loss tangent of 0.0025, and the substrate thickness of 0.8 mm. The presented MIMO antenna is excited with a 3 mm wide microstrip feed line having 50 Ω characteristics matched impedance. In terms of performance, the proposed antenna has achieved a reflection coefficient < - 10 dB, and isolation < -15 dB in all the resonating bands, radiation efficiency varies 72%–84%, impedance bandwidth of 4.6 GHz, 1.5 GHz, 1.11 GHz, and 7.5 GHz, and realized gain of 10.18, 12.05, 13.07, & 5.55 dBi is also achieved at frequencies 16 GHz, 25.5 GHz, 28 GHz, and 32 GHz. The achieved values for various MIMO matrices are envelope correlation coefficient > 0.0048, diversity gain of 9.98 dB, channel capacity loss < 0.00023 bits/s/Hz, and mean effective gain < -6 dB. The simulated results obtained by ANSYS I 2022 R2 (HFSS) and the experimental results measured by vector network analyzer (VNA) show a good agreement.

A Novel Monopole Ultra-Wide-Band Multiple-Input Multiple-Output Antenna with Triple-Notched Characteristics for Enhanced Wireless Communication and Portable Systems.

This study introduces a monopole 4 × 4 Ultra-Wide-Band (UWB) Multiple-Input Multiple-Output (MIMO) antenna system with a novel structure and outstanding performance. The proposed design has triple-notched characteristics due to CSRR etching and a C-shaped curve. The notching occurs in 4.5 GHz, 5.5 GHz, and 8.8 GHz frequencies in the C-band, WLAN band, and satellite network, respectively. Complementary Split-Ring Resonators (CSRR) are etched at the feed line and ground plane, and a C-shaped curve is used to reduce interference between the ultra-wide band and narrowband. The mutual coupling of CSRR enables the MIMO architecture to achieve high isolation and polarisation diversity. With prototype dimensions of (60.4 × 60.4) mm2, the proposed antenna design is small. The simulated and measured results show good agreement, indicating the effectiveness of the UWB-MIMO antenna for wireless communication and portable systems.

Higher Order MIMO Antenna Design Using Capacitively Coupled Meandered Loop Element for 5G Smartphone Applications

In this paper, a compact 10-element multiple-input multiple-output (MIMO) antenna system for fifth generation (5G) wireless communication system is presented. The antenna structure has a T-shaped feeding element and a reduced size capacitively coupled meandered loop radiating element. The proposed MIMO antenna system is operating at 3.5 GHz. The MIMO antenna element is self-isolated and it has a compact size of 13.45×6 mm2. It exhibits very good isolation of more than 15 dB without using any external decoupling structure like a neutralization line or slot technique. Furthermore, performance parameters like total efficiency are around 40-64%, envelope correlation coefficient (ECC) is below 0.02, while gain of all antennas is between 3-3.4dBi. The performance of the proposed MIMO antenna is also verified through the measurement of its fabricated prototype. In this paper, a compact 10-element multiple-input multiple-output (MIMO) antenna system for fifth generation (5G) wireless communication system is presented.

High Isolated 10-MIMO Antenna Elements for 5G Mobile Applications

The enormous increase in gadgets has resulted in a data rate shortage insufficient to satisfy the user's needs. The multiple input multiple output (MIMO) technique is substantially deployed in the 5G wireless communication system to increase channel capacity and provide sufficient throughput. However, MIMO antennas are associated with mutual coupling, especially between closely spaced antenna elements, resulting in a low MIMO performance. Therefore, effective isolation techniques are essential to reduce the mutual coupling between the adjacent MIMO antenna elements. A hybrid decoupling technique of self-isolation and an orthogonal mode approach has been proposed to provide significant isolation for high MIMO order 5G mobile applications. A compact self-isolated 10 × 10 MIMO antenna system has been proposed for 5G mobile phone applications operating at the 3.5 GHz frequency band. The antennas act as radiating and isolating elements simultaneously, providing significant isolation. Furthermore, the self-isolated 10-MIMO antenna elements are printed on double side edges of FR-4 small substrates orthogonal to the system substrates, forming an orthogonal mode that enhances the self-decoupling approach. The s-parameters results indicate significant isolation of less than -19 dB between the adjacent 10-MIMO antenna elements. Likewise, the evaluation results of the MIMO performance metrics such as envelope correlation coefficient (ECC), diversity gain (DG), total active reflection coefficient (TARC), and channel capacity Loss (CCL), are less than 0.006, 9.97 dB, -10 dB, and 0.08 bits/s/Hz respectively. The isolation result and the evaluated MIMO performance metrics demonstrate that the proposed 10-MIMO antenna system is sufficient for 5G mobile applications.

Advances in MIMO Antenna Design for 5G: A Comprehensive Review.

Multiple-input multiple-output (MIMO) technology has emerged as a highly promising solution for wireless communication, offering an opportunity to overcome the limitations of traffic capacity in high-speed broadband wireless network access. By utilizing multiple antennas at both the transmitting and receiving ends, the MIMO system enhances the efficiency and performance of wireless communication systems. This manuscript specifies a comprehensive review of MIMO antenna design approaches for fifth generation (5G) and beyond. With an introductory glimpse of cellular generation and the frequency spectrum for 5G, profound key enabling technologies for 5G mobile communication are presented. A detailed analysis of MIMO performance parameters in terms of envelope correlation coefficient (ECC), total active reflection coefficient (TARC), mean effective gain (MEG), and isolation is presented along with the advantages of MIMO technology over conventional SISO systems. MIMO is characterized and the performance is compared based on wideband/ultra-wideband, multiband/reconfigurable, circular polarized wideband/circular polarized ultra-wideband/circular polarized multiband, and reconfigurable categories. The design approaches of MIMO antennas for various 5G bands are discussed. It is subsequently enriched with the detailed studies of wideband (WB)/ultra-wideband (UWB), multiband, and circular polarized MIMO antennas with different design techniques. A good MIMO antenna system should be well decoupled among different ports to enhance its performance, and hence isolation among different ports is a crucial factor in designing high-performance MIMO antennas. A summary of design approaches with improved isolation is presented. The manuscript summarizes the various MIMO antenna design aspects for NR FR-1 (new radio frequency range) and NR FR-2, which will benefit researchers in the field of 5G and forthcoming cellular generations.