Multiple Cloning Site Research Articles

A universal mini-vector and an annealing of PCR products (APP)-based cloning strategy for convenient molecular biological manipulations

Currently, the most widely used strategies for molecular cloning are sticky-end ligation-based cloning, TA cloning, blunt-end ligation-based cloning and ligase-independent cloning. In this study we have developed a novel mini-vector pANY1 which can simultaneously meet the requirements of all these cloning strategies. In addition, the selection of appropriate restriction digestion sites is difficult in some cases because of the presence of internal sites. In this study, an annealing of PCR products (APP)-based sticky-end cloning strategy was introduced to avoid this issue. Additionally, false positives occur during molecular cloning, which increases the workload of isolating positive clones. The plasmid pANY1 contains a ccdB cassette between multiple cloning sites, which efficiently avoids these false positives. Therefore, this mini-vector should serve as a useful tool with wide applications in biosciences, agriculture, food technologies, etc.

Single plasmid systems for inducible dual protein expression and for CRISPR-Cas9/CRISPRi gene regulation in lactic acid bacterium Lactococcus lactis

Lactococcus lactis is a food-grade lactic acid bacterium that is used in the dairy industry as a cell factory and as a host for recombinant protein expression. The nisin-controlled inducible expression (NICE) system is frequently applied in L. lactis; however new tools for its genetic modification are highly desirable. In this work NICE was adapted for dual protein expression. Plasmid pNZDual, that contains two nisin promoters and multiple cloning sites (MCSs), and pNZPolycist, that contains a single nisin promoter and two MCSs separated by the ribosome binding site, were constructed. Genes for the infrared fluorescent protein and for the human IgG-binding DARPin were cloned in all possible combinations to assess the protein yield. The dual promoter plasmid pNZDual enabled balanced expression of the two model proteins. It was exploited for the development of a single-plasmid inducible CRISPR-Cas9 system (pNZCRISPR) by using a nisin promoter, first to drive Cas9 expression and, secondly, to drive single guide RNA transcription. sgRNAs against htrA and ermR directed Cas9 against genomic or plasmid DNA and caused changes in bacterial growth and survival. Replacing Cas9 by dCas9 enabled CRISPR interference-mediated silencing of the upp gene. The present study introduces a new series of plasmids for advanced genetic modification of lactic acid bacterium L. lactis.

Designing and Reconstruction of pcDNA 3.0 Mammalian Expression Vector with its Multiple Cloning Sites by Directional Cloning Method

Traditional cloning is the cloning in which we use restriction endonucleases to produce DNA fragments with specific complementary end sequences that can be joined together with a DNA ligase enzyme, prior to the transformation. The purpose of this study was to reconstruct the mammalian expression vector by replacing the junk DNA with its natural multiple cloning sites. Plasmid was propagated and digested with Xho1 and Kpn1 enzymes from both sides of junk DNA a 600 bp DNA was cut from the vector and then ligation of 30 bp primer which was designed similar as its multiple sequence sites. Correct insertion was confirmed by plasmid isolation, plasmid colony PCR, PCR of cloned plasmid and comparison on gel electrophoresis with the original one and finally by sequencing. An extra DNA fragment of 600 bp was cut from the vector after restriction digestion. Ligated colonies appeared on the agar plate from which 60 bp colony PCR products was produced. Plasmid isolation after cloning and colony PCR and PCR of cloned plasmid confirmed the cloning. Cloning of multiple cloning sites in pcDNA3.0 mammalian expression vector was performed successfully. Ligation of multiple cloning sites in pcDNA vector provided various restriction enzymes recognition sites for simple and fast cloning.

Standardized cloning vectors for protein production and generation of large gene libraries in Escherichia coli.

Here, we modified the multiple cloning sites from commonly used expression vectors to create a new suite of cloning plasmids that simplify and speed up cloning procedures in Escherichia coli. Each of our standardized plasmids contains two BsaI restriction sites, allowing for highly efficient cloning of genes and bringing their expression under control of either a T7 (pET21a_BsaI, pET28a_BsaI, and pMAL-c5T_BsaI) or T5 promoter (pUR22 and pUR23). Another plasmid in our suite (pTNA_BsaI) allows for generation of large gene libraries containing >108 variants, which can be constitutively expressed in selection experiments using metabolic complementation of auxotrophic E. coli strains. Coupling restriction and ligation with the BsaI restriction enzyme minimizes hands-on time, while the need for only three different primers to clone a target gene into the six different vectors keeps overall cloning costs low.

Construction of pOGOduet – An inducible, bicistronic vector for synthesis of recombinant proteins in Corynebacterium glutamicum

The Gram-positive Corynebacterium glutamicum is widely known for its application in the industrial production of amino acids and as a non-pathogenic model organism for cell wall biosynthesis in the group of CMN bacteria. For biotechnological and physiological studies often co-expression of recombinant genes is required, however for C. glutamicum no vector for the independent co-expression of two genes was described. We here created the novel expression vector pOGOduet for C. glutamicum, which carries the ColE1 replicon of E. coli and the pBL1 replicon of C. glutamicum and two independently inducible promoters Ptac and Ptet each followed by unique multiple cloning sites. Functionality of pOGOduet is tested by coexpression of genes for the fluorescent proteins eCFP and mVenus; fluorescence of the reporters varies in dependence of the inducer concentrations present in the culture broth. These experiments demonstrate that the vector pOGOduet fulfills the task for individually inducible expression of two genes of interest in C. glutamicum.

Construction of T-vector derived from pBluescript ΙΙ SK with a positive selection marker, a rapid system for cloning

A rapid DNA cloning system is a research interest of many scientists. TA cloning is one of the methods used for the cloning of PCR-amplified DNA molecules. The TA cloning method is a convenient and labor-saving replacement to traditional, restriction enzyme-mediated cloning strategies. A T-vector called pBlueskript ΙΙ SK-1 with the lethal gene ccdB was designed to construct a positive selection vector. This lethal gene was inserted in multiple cloning sites of pBlueskript ΙΙ SK. Then the vector digested with the endonuclease SmaΙ producing the blunt end. To directly clone the PCR product, a single 3'-A was added to a double-stranded DNA fragment by Taq polymerase and a T-vector with 3'-T overhang at each end using ddTTP and terminal transferase enzyme. The recombinant vector was transferred to the competent cells of host Escherichia coli. After DNA fragment entry, the activity of the ccdB gene eliminated, and the survival probability and host colony formation increased after transformation with the recombinant vector. The proliferation of the host of the T-vector was highly specific, and only hosts with the ccdA gene were able to receive this vector, to replicate the vector and survive. Therefore, after the insertion of the target gene, the lethal gene becomes inactivated, so there was no need to use a specific host and other selective markers, such as antibiotics. The TA cloning with a positive selection marker strategy is both simple and much more efficient than blunt-ended ligation and cohesive-end cloning.

Nisin-induced expression of recombinant T cell epitopes of major Japanese cedar pollen allergens in Lactococcus lactis.

Japanese cedar pollinosis is a seasonal allergic disease caused by two major pollen allergens: Cry j 1 and Cry j 2 antigens. To develop an oral vaccine to treat pollinosis, we constructed recombinant Lactococcus lactis harboring the gene encoding fused T cell epitopes from the Cry j 1 and Cry j 2 antigens. The recombinant T cell epitope peptide was designed to contain the fused cholera toxin B subunit as an adjuvant and a FLAG tag at the C-terminus. An expression plasmid was constructed by inserting the T cell epitope peptide gene into the multiple cloning sites of plasmid pNZ8148, an Escherichia coli-L. lactis shuttle vector. The constructed plasmid was transformed into L. lactis NZ9000 for expression induced by nisin, an antibacterial peptide from L. lactis. The expression of the epitope peptide was induced with 10-40ng/mL nisin, and the expressed T cell epitope peptide was detected by western blot analysis using an anti-FLAG antibody and an antibody against the T cell epitopes. The concentration of the epitope peptide was estimated to be ~22mg/L of culture in the presence of 40ng/mL nisin, although it varied depending on the nisin concentration, the culture time, and the bacterial concentration when nisin was added. The expression of the recombinant epitope peptide in L. lactis, an organism generally recognized as safe, as demonstrated in this study, may contribute to the development of an oral vaccine for the treatment of pollinosis.

Use of a Virus Gene Silencing Vector for Maize Functional Genomics Research.

Virus-induced gene silencing (VIGS) is a genetic technology that exploits the RNA-mediated defense against virus. The method has great potential for plant reverse genetics as it could knock down gene expression in a rapid way, which is triggered by a replicating viral genome engineered to carry a fragment of host gene to be silenced. A number of efficient VIGS vectors are available for dicots, such as for model plant Nicotiana benthamiana; however, only a few of VIGS vectors for monocotyledonous cereal crops. Here, we describe the method for the use of a newly developed VIGS vector based on a maize-infecting Cucumber mosaic virus (CMV) strain ZMBJ-CMV for maize. The RNA2 of ZMBJ-CMV was modified as a vector pCMV201-2bN81 having multiple cloning sites for the insert of 100-300bp fragment of target gene. Using a method of vascular puncture inoculation of maize seeds with crude sap prepared from Agrobacterium-infiltrated N. benthamiana leaves, silencing of target genes could be obtained in 4weeks.

Development of a new host-vector system for colour selection of cloned DNA inserts using a newly designed β-galactosidase gene containing multiple cloning sites in Thermus thermophilus HB27.

We constructed a new Thermus thermophilus cloning vector which enables the colour selection of cloned DNA inserts in the T. thermophilus HB27 host strain (β-gal-) on growth plates containing 3,4-cyclohexenoesculetin β-D-galactopyranoside (S-gal) in the medium. This vector harbors a modified β-galactosidase gene (TTP0042 of T. thermophilus HB27) with 12 unique restriction enzyme sites (Acc65I, AvrII, BlpI, BssHII, EcoRI, EcoRV, HindIII, NruI, SalI, SpeI, SphI and XbaI) as multiple cloning sites under the control of the T. thermophilus slpA promoter. This host-vector system facilitates cloning procedures in T. thermophilus HB27.

Using Phage Display to Create Recombinant Antibodies.

A variety of phage display technologies have been developed since the approach was first described for antibodies. The most widely used approaches incorporate antibody sequences into the minor coat protein pIII of the nonlytic filamentous phage fd or M13. Libraries of variable gene sequences, encoding either scFv or Fab fragments, are made by incorporating sequences into phagemid vectors. The phagemid is packaged into phage particles with the assistance of a helper phage to produce the antibody display phage. This protocol describes a method for creating a phagemid library. The multiple cloning site (MCS) of the pBluescript KS(-) phagemid vector is replaced by digestion with the restriction enzyme BssHII, followed by the insertion of four overlapping oligonucleotides to create a new MCS within the vector. Next, the 3' portion of gene III (from M13mp18) is amplified and combined with an antibody sequence using overlap extension PCR. This product is inserted into the phagemid vector to create pPDS. Two helper plasmids are also created from the modified pBluescript vector: pLINK provides the linker between the heavy and light chains, and pFABC provides the CH1 domain of the heavy chain. An antibody cDNA library is constructed from the RNA of interest and ligated into pPDS. The phagemid library is electroporated into Escherichia coli cells along with the VCS-M13 helper phage.

Construction of novel pJRD215-derived plasmids using chloramphenicol acetyltransferase (cat) gene as a selection marker for Acidithiobacillus caldus.

BackgroundAcidithiobacillus caldus, a Gram-negative, chemolithotrophic sulfur-oxidizing bacterium, is widely applied in bioleaching. The absence of an ideal selection marker has become a major obstacle to achieve high efficiency of the gene transfer system for A. caldus. Plasmid pJRD215, widely used in Acidithiobacillus spp., has severe drawbacks in molecular manipulations and potential biosafety issues due to its mobility. Therefore, finding a new selection marker and constructing new plasmids have become an urgent and fundamental work for A. caldus.ResultsEffective inhibitory effect of chloramphenicol on the growth of A. caldus was elucidated for the first time. The P2-cat gene cassette, including a chloramphenicol acetyltransferase gene (cat) from plasmid pACBSR and a promoter (P2) upstream of the tetracycline resistance gene on pBR322, was designed, chloramphenicol acetyltransferase was expressed in A. caldus, and the enzyme activity was assessed. A new vector pSDU1 carrying the replication and mobilization regions derived from pJRD215, the P2-cat gene cassette and a multiple cloning site from pUC19 was successfully constructed. Compared with pJRD215, pSDU1 had a 27-fold increase in electrotransformation efficiency (30.43±0.88×104 CFU/μg DNA for pSDU1 and 1.09±0.11×104 CFU/μg DNA for pJRD215), better carrying capacity and could offer more convenience for the restriction enzyme digestion. In addition, the generated plasmid pSDU1Δmob, a novel non-mobilizable derivative of pSDU1 lacking some DNA sequences involved in the mobilization process, had increased copy number in A. caldus and lost its mobility for biosafety considerations. Both pSDU1 and pSDU1Δmob exhibited stable maintenance in A. caldus within 50 passages. However, further deletion of orfEF region involved in regulating repAC operon resulted in a negative effect on transformation efficiency, copy number and stability of plasmid pSDU1ΔmobΔorfEF in A. caldus.ConclusionChloramphenicol was proved to be an ideal selection marker for A. caldus. Novel plasmids carrying cat gene were constructed. The utilization of these vectors will undoubtedly facilitate efficient genetic manipulations and accelerate the research progress in A. caldus.

Production of d-psicose from d-glucose by co-expression of d-psicose 3-epimerase and xylose isomerase.

d-Psicose has been drawing increasing attention in recent years because of its medical and health applications. The production of d-psicose from d-glucose requires the co-expression and synergistic action of xylose isomerase and d-psicose 3-epimerase. To co-express these genes, vector pET-28a(+)-dual containing two T7 promoters and RBS sites and an Multiple Cloning Sites was constructed using the Escherichia coli expression plasmid pET-28a(+). The xylose isomerase gene from E. coli MG1665 and the d-psicose 3-epimerase gene from Agrobacterium tumefaciens CGMCC 1.1488 were cloned and co-expressed in E. coli BL21(DE3). After 24h incubation with the dual enzyme system at 40°C, the sugar conversion ratio from d-glucose to d-psicose reached 10%. The optimal conditions were 50°C, pH 7.5 with Co2+ and Mg2+. The d-psicose yields from sugarcane bagasse and microalgae hydrolysate were 1.42 and 1.69g/L, respectively.

Genetic determinant of Bacillus pumilus lipase lethality and its application as positive selection cloning vector in Escherichia coli

Positive selection vectors carry genes that upon expression produce proteins that cause host cell deaths. Insertion of foreign DNA fragments within the ORF of the gene disrupts the lethal effect of the expressed protein. This study described the cloning of Family I.4 Bacillus pumilus lipase gene whose expressed protein is toxic and lethal to Escherichia coli JM109 (DE3) cells. The determinant of toxicity was identified through Error-prone PCR to be the nature of amino acid residue resident at position 28 of the mature lipase protein. The presence of Thr/Ser28 within the mature lipases of B. pumilus and B. licheniformis resulted in lethality to E. coli cells. However, the Thr28Ala or Thr28Gly mutations relieved the lethal phenotype of mature Family I.4 Bacillus lipases. The toxic effect of the expressed mature B. pumilus lipase protein was exploited in the development of a positive selection cloning vector. The B. pumilus lipase gene was synthesised to contain 13 unique silent restriction sites within the ORF, and placed under the regulation of T7 promoter of the pET expression system. Insertional inactivation of the gene's toxic protein was achieved by cloning DNA fragments of different sizes within the designed multiple cloning sites. The toxic effect of the lipase protein was disrupted indicating the potential of the gene for application in suicidal positive selection cloning vectors. The results revealed that protein expression and engineering studies aimed at optimal production of mature Family I.4 Bacillus lipases in E. coli should take into consideration the nature of amino acid 28 resident.

Design of a Lentiviral Vector for the Inducible Expression of MYC: A New Strategy for Construction Approach.

Lentiviral vectors are powerful tools for gene expression studies. Here we report the construction of pTIJ, a vector for inducible gene expression. pTIJ was generated from pTRIPZ backbone, which is designed for the inducible expression of shRNA sequences, by the introducing of a multiple cloning site upstream of the Tet promoter and the removal of miR30 flanking sequences. To evaluate pTIJ as a tool for the inducible expression of genes of interest, we introduced MYC cDNA into pTIJ and infected two small cell lung cancer cell lines, H209 and H345. Induction of MYC expression by doxycycline was detectable in both cell lines by real-time PCR and western blot analysis. This study highlights the relevance of pTIJ vector to allow the inducible expression of any gene of interest. In our belief, pTIJ will be an extremely useful tool to simplify the generation of genetically engineered cell lines for the inducible expression of cDNA sequences in biological studies. Furthermore, we report the generation of a pTIJ-MYC vector for the inducible expression of the oncogene MYC.

A novel genetic tool for metabolic optimization of Corynebacterium glutamicum: efficient and repetitive chromosomal integration of synthetic promoter-driven expression libraries.

Fine-tuning the expression level of multiple genes is usually pivotal for metabolic optimization. We have developed a tool for this purpose for the important industrial workhorse Corynebacterium glutamicum that allows for the introduction of synthetic promoter-driven expression libraries of arbitrary genes. We first devised a method for introducing genetic elements into the chromosome repeatedly, relying on site-specific recombinases and the vector pJS31 serving as the carrier. The pJS31 vector contains a synthetic cassette including a phage attachment site attP for integration, a bacterial attachment site attB for subsequent integration, a multiple cloning site, and two modified loxP sites to facilitate easy removal of undesirable vector elements. Meanwhile, we constructed a derivative of the wild-type strain ATCC 13032 carrying an attB site in its chromosome (JS34) and demonstrated that pJS31 readily could integrate into the attB site in this strain providing expression of the corresponding integrase. Subsequent expression of the Cre recombinase promoted recombination between the modified loxP sites, resulting in a strain only retaining the target insertions and an attB site. To simplify the procedure, non-replicating circular expression units for the phage integrase and the Cre recombinase were used. As a showcase, we used the tool to construct a battery of strains simultaneously expressing the two reporter genes, lacZ (encoding β-galactosidase) and gusA (encoding β-glucuronidase), to arbitrary levels. In principle, an unlimited number of genes, whether native, heterologous, or synthetic, can be introduced using the developed approach, and this should greatly facilitate metabolic optimization of this important platform organism.

An external substrate-free blue/white screening system in Escherichia coli.

Since the lacZα-based blue/white screening system was introduced to molecular biology, several different visual reporter systems were developed and used for various purposes in Escherichia coli. A common limit to the existent visual reporter systems is that an extracellular chromogenic substrate has to be added for the visible pigment production. In this study, we developed a new blue/white screening system based on a non-ribosomal peptide synthetase encoded by idgS from Streptomyces and a phosphopantetheinyl transferase encoded by sfp from Bacillus. When IdgS is activated from an apo-form to a holo-form via a posttranslational modification catalyzed by Sfp, it can synthesize a blue pigment indigoidine using L-glutamine, the amino acid abundant in cells, as a substrate. The new blue/white screening system contains a recipient E. coli strain with an optimized idgS gene cassette and a cloning vector harboring an sfp gene with an in-frame insertion of a multiple cloning site close to its N-terminal. We demonstrated that the IdgS/Sfp-based blue/white screening system is a powerful alternative to the lacZα-based screening system, which does not require any external substrate addition.

Characterization of the cryptic plasmid pOfk55 from Legionella pneumophila and construction of a pOfk55-derived shuttle vector

In this study, a cryptic plasmid pOfk55 from Legionella pneumophila was isolated and characterized. pOfk55 comprised 2584bp with a GC content of 37.3% and contained three putative open reading frames (ORFs). orf1 encoded a protein of 195 amino acids and the putative protein shared 39% sequence identity with a putative plasmid replication protein RepL. ORF1 was needed for replication in L. pneumophila but pOfk55 did not replicate in Escherichia coli. orf2 and orf3 encoded putative hypothetical proteins of 114 amino acids and 78 amino acids, respectively, but the functions of the putative proteins ORF2 and OFR3 are not clear. The transfer mechanism for pOfk55 was independent on the type IVB secretion system in the original host. A L. pneumophila–E. coli shuttle vector, pNT562 (5058bp, KmR), was constructed by In-Fusion Cloning of pOfk55 with a kanamycin-resistance gene from pUTmini-Tn5Km and the origin of replication from pBluescript SK(+) (pNT561). Multiple cloning sites from pBluescript SK(+) as well as the tac promoter region and lacI gene from pAM239-GFP were inserted into pNT561 to construct pNT562. The transformation efficiency of pNT562 in L. pneumophila strains ranged from 1.6×101 to 1.0×105CFU/ng. The relative number of pNT562 was estimated at 5.7±1.0 copies and 73.6% of cells maintained the plasmid after 1week in liquid culture without kanamycin. A green fluorescent protein (GFP) expression vector, pNT563, was constructed by ligating pNT562 with the gfpmut3 gene from pAM239-GFP. pNT563 was introduced into L. pneumophila Lp02 and E. coli DH5α, and both strains expressed GFP successfully. These results suggest that the shuttle vector is useful for genetic studies in L. pneumophila.

Insertion of inter-domain linkers improves expression and bioactivity of Zygote arrest (Zar) fusion proteins

Developmentally important proteins that are crucial for fertilization and embryogenesis are synthesized through highly regulated translation of maternal mRNA. The Zygote arrest proteins, Zar1 and Zar2, are crucial for embryogenesis and have been implicated in binding mRNA and repressing mRNA translation. To investigate Zar1 and Zar2, the full-length proteins had been fused to glutathione-S-transferase (GST) orMS2 protein tags with minimal inter-domain linkers derived from multiple cloning sites; however, these fusion proteins expressed poorly and/or lacked robust function. Here, we tested the effect of inserting additional linkers between the fusion domains. Three linkers were tested, each 17 amino acids long with different physical and chemical properties: flexible hydrophilic, rigid extended or rigid helical. In the presence of any of the three linkers, GST-Zar1 and GST-Zar2 had fewer breakdown products. Moreover, in the presence of any of the linkers, MS2-Zar1 was expressed to higher levels, and in dual luciferase tethered assays, both MS2-Zar1 and MS2-Zar2 repressed luciferase translation to a greater extent. These data suggest that for Zar fusion proteins, increasing the length of linkers, regardless of their physical or chemical properties, improves stability, expression and bioactivity.

PELMO, an optimised in-house cloning vector

DNA cloning is an essential tool regarding DNA recombinant technology as it allows the replication of foreign DNA fragments within a cell. pELMO was here constructed as an in-house cloning vector for rapid and low-cost PCR product propagation; it is an optimally designed vector containing the ccdB killer gene from the pDONR 221 plasmid, cloned into the pUC18 vector’s multiple cloning site (Thermo Scientific). The ccdB killer gene has a cleavage site (CCC/GGG) for the SmaI restriction enzyme which is used for vector linearisation and cloning blunt-ended products. pELMO transformation efficiency was evaluated with different sized inserts and its cloning efficiency was compared to that of the pGEM-T Easy commercial vector. The highest pELMO transformation efficiency was observed for ~500 bp DNA fragments; pELMO vector had higher cloning efficiency for all insert sizes tested. In-house and commercial vector cloned insert reads after sequencing were similar thus highlighting that sequencing primers were designed and localised appropriately. pELMO is thus proposed as a practical alternative for in-house cloning of PCR products in molecular biology laboratories.

Construction of Two mCherry Plasmids (pXG-mCherry) for Transgenic Leishmania: Valuable Tools for Future Molecular Analysis.

Leishmania is the causative agent of leishmaniasis, a neglected tropical disease that affects more than 12 million people around the world. Current treatments are toxic and poorly effective due to the acquisition of resistance within Leishmania populations. Thus, the pursuit for new antileishmanial drugs is a priority. The available methods for drug screening based on colorimetric assays using vital dyes are time-consuming. Currently, the use of fluorescent reporter proteins is replacing the use of viability indicator dyes. We have constructed two plasmids expressing the red fluorescent protein mCherry with multiple cloning sites (MCS), adequate for N- and C-terminal fusion protein constructs. Our results also show that the improved pXG-mCherry plasmid can be employed for drug screening in vitro. The use of the red fluorescent protein, mCherry, is an easier tool for numerous assays, not only to test pharmacological compounds, but also to determine the subcellular localization of proteins.