Multifunctional Molecule Research Articles

A monoclonal antibody recognizing CD98 on human embryonic stem cells shows anti-tumor activity in hepatocellular carcinoma xenografts

CD98, also known as SLC3A2, is a multifunctional cell surface molecule consisting of amino acid transporters. CD98 is ubiquitously expressed in many types of tissues, but expressed at higher levels in cancerous tissues than in normal tissues. CD98 is also upregulated in most hepatocellular carcinoma (HCC) patients; however, the function of CD98 in HCC cells has been little studied. In this study, we generated a panel of monoclonal antibodies (MAbs) against surface proteins on human embryonic stem cells (hESCs). NPB15, one of the MAbs, bound to hESCs and various cancer cells, including HCC cells and non-small cell lung carcinoma (NSCLC) cells, but not to peripheral blood mononuclear cells (PBMCs) and primary hepatocytes. Immunoprecipitation and mass spectrometry identified the target antigen of NPB15 as CD98. CD98 depletion decreased cell proliferation, clonogenic survival, and migration and induced apoptosis in HCC cells. In addition, CD98 depletion decreased the expression of cancer stem cell (CSC) markers in HCC cells. In tumorsphere cultures, the expression of CD98 interacting with NPB15 was significantly increased, as were known CSC markers. After cell sorting by NPB15, cells with high expression of CD98 (CD98-high) showed higher clonogenic survival than cells with low expression of CD98 (CD98-low) in HCC cells, suggesting CD98 as a potential CSC marker on HCC cells. The chimeric version of NPB15 was able to induce antibody-dependent cellular cytotoxicity (ADCC) against HCC cells in vitro. NPB15 injection showed antitumor activity in an HCC xenograft mouse model. The results suggest that NPB15 may be developed as a therapeutic antibody for HCC patients.

Reversible pH-switchable NIR-II nano-photosensitizer for precise imaging and photodynamic therapy of tumors

Photodynamic therapy (PDT) has attracted widespread attention from researchers as an emerging cancer treatment method. There have been many reports on various types of NIR-II photosensitizers for imaging and treatment of tumor sites. However, there are few reports on the development of NIR-II organic small molecule photosensitizers that have intelligent response to the tumor microenvironment, precise imaging, real-time treatment, and high biocompatibility. In this work, we developed a series of NIR-II photosensitizers (RBTs) with near-infrared excitation, good photostability, and large Stokes shift. Among them, RBT-Br exhibited higher reactive oxygen species (ROS) generation efficiency due to the introduction of halogen heavy atoms to enhance intersystem crossing (ISC). It is noteworthy that RBT-Br can generate singlet oxygen (1O2) and superoxide anion radicals (•O2−) simultaneously under 730 nm laser. Subsequently, we used molecular engineering technology to construct three pH-responsive NIR-II photosensitizers (RBT-pHs) by utilizing the closure of the lactam ring, among which RBT-pH-1 (pKa = 6.78) is able to be directionally activated under the stimulation of tumor micro-acid environment, with its fluorescence emission window reaching 933 nm. Subsequently, RBT-pH-1 NPs encapsulated in DSPE-mPEG5k were applied for PDT treatment of mouse tumors. The results showed that RBT-pH-1 NPs were activated by the acidic tumor microenvironment and generated ROS under laser excitation, exhibiting precise tumor imaging and significant tumor growth inhibition. We look forward to these multifunctional NIR-II organic small molecule photosensitizers providing a more efficient approach for clinical treatment of tumors. Statement of significanceA reversible pH-switchable NIR-II nano-photosensitizer RBT-pH-1 NPs (pKa = 6.76) is developed for precise imaging and PDT therapy of mouse tumors, which can be effectively used for targeted enrichment and activation of tumor micro-acid environments. The results show that this NIR-II photosensitizer generates ROS through tumor micro-acid environment stimulation and laser triggering, showing precise tumor imaging guidance and significant tumor growth inhibition.

Rational Tailored Polyfluorosubstituted Amide Molecule for Stabilizing PbI6 Framework and Inhibiting Ion Migration Toward Highly Efficient and Stable Perovskite Solar Cells

AbstractPerovskite solar cells (PSCs), while highly efficient, face stability challenges that hinder their commercial application. These instability issues mainly arise from the fragile nature of Pb─I bonds in perovskites, which easily break under environmental stresses such as heat and light, leading to the breakdown of the [PbI6] framework and irreversible degradation. To address these issues, a multifunctional molecule, N1,N4‐bis(2,3,5,6‐tetrafluoro‐4‐iodophenyl)terephthalamide (FIPh‐A), is designed and synthesized to enhance the stability of perovskite films and devices. FIPh‐A molecule possesses carbonyl, amino, and iodotetrafluorophenyl groups that bind and stabilize Pb2+ ions and [PbI6]4− octahedra structure, preventing ion migration in perovskite films. The activation energy of ion migration increases obviously from 0.28 eV to 0.39 eV by adding FIPh‐A verified by experiment results. The residual strain is also released efficiently by introducing FIPh‐A molecule into perovskite films characterized by grazing incidence X‐ray diffraction. The champion PSC with FIPh‐A achieves a power conversion efficiency of 24.60%. After 500 h of continuous illumination (ISOS‐L‐1) and 300 h of thermal aging at 80 °C (ISOS‐D‐2I), these PSCs with FIPh‐A maintained 93% and 77% of their initial efficiency, respectively. These results emphasize the potential of multifunctional additives in overcoming the stability challenges of PSCs, thereby facilitating their commercial advancement.

Columnar Macrocyclic Molecule Tailored Grain Cage to Stabilize Inorganic Perovskite Solar Cells with Suppressed Halide Segregation

AbstractSolidifying the soft lattice of all‐inorganic mixed‐halide perovskites is of great importance to restrain the notorious halide segregation under persistent light illumination. Herein, a multifunctional columnar macrocyclic molecule additive, namely cucurbituril into perovskite precursor to enhance the crystallization and reduce the defect density in the final perovskite film is introduced. Based on the theoretical calculation and simulation, the cucurbituril molecule with a strong double‐ended negatively‐charged cavity surrounded by terminated oxygen atoms not only coordinates with dangling Pb2+ ions to form host‐guest complexation but also induces an electric dipole field at perovskite grain boundary to effectively repel the iodide ion migration from the inside grain to the defective boundary, significantly suppressing the halide segregation and improving the device performance. As a result, the carbon‐based, all‐inorganic CsPbI2Br solar cell achieves an enhanced efficiency of 15.59% with great tolerance to environmental stresses. These findings provide new insights into the development of a novel passivation strategy with macrocyclic molecules for making high‐efficiency and stable perovskite solar cells.

Synthesis of Multifunctional Organic Molecules via Michael Addition Reaction to Manage Perovskite Crystallization and Defect.

Additive engineering plays a pivotal role in achieving high-quality light-absorbing layers for high-performance and stable perovskite solar cells (PSCs). Various functional groups within the additives exert distinct regulatory effects on the perovskite layer. However, few additive molecules can synergistically fulfill the dual functions of regulating crystallization and passivating defects. Here, we custom-synthesized 2-ureido-4-pyrimidone (UPy) organic small molecules with diverse functional groups as additives to modulate crystallization and defects in perovskite films via the Michael addition reaction. Theoretical and experimental investigations demonstrate that the -OH groups in UPy exhibit significant effects in fixing uncoordinated Pb2+ ions, passivation of lead-iodide antisite defects, alleviating hysteresis, and reducing non-radiative recombination. Furthermore, the enhanced C=O and -NH2 motifs interact with the A-site cation via hydrogen bonding, which relieves residual strain and adjusts crystal orientation. This strategy effectively controls perovskite crystallization and passivates defects, ultimately enhancing the quality of perovskite films. Consequently, the open-circuit voltage of the UPy-based p-i-n PSCs reaches 1.20 V, and the fill factor surpasses 84%. The champion device delivers a power conversion efficiency of 25.75%. Remarkably, the unencapsulated device maintained 96.9% and 94.5% of its initial efficiency following 3,360 hours of dark storage and 1,866 hours of 1-sun illumination, respectively.

Comprehensive Characterization of Drying Oil Oxidation and Polymerization Using Time-Resolved Infrared Spectroscopy.

Drying oils like linseed oil are composed of multifunctional triglyceride molecules that can cure through three-dimensional free-radical polymerization into complex polymer networks. In the context of oil paint conservation, it is important to understand how factors like paint composition and curing conditions affect the chemistry and network structure of the oil polymer network and subsequently the links between the structure and long-term paint stability. Here, we employed time-resolved ATR-FTIR spectroscopy and comprehensive data analysis to study the curing behavior of five types of drying oil and the effects of curing temperature as well as the presence of a curing catalyst (PbO). Extracted concentration curves of key reactive functional groups point to a phase transition similar to a gel point that is especially pronounced in the presence of PbO, after which curing reactivity slows down dramatically. Analysis of kinetic parameters suggests that PbO induces a network structure with a more heterogeneous cross-link density, and the ATR-FTIR spectra indicate lower levels of oxidation in those cases. Finally, lower temperatures appear to favor the formation of carboxylic acid groups in oil mixtures with PbO.

Target therapy on buried interface engineering enables stable inverted perovskite solar cells with 25 % power conversion efficiency

buried interfaces are crucial for achieving efficient and stable perovskite solar cells (PSCs). However, studying and optimizing buried interfaces remains a challenging issue due to its non-exposed characteristics. Here, a simple and effective targeting strategy is proposed to regulate the NiOx/perovskite buried interface by passivating buried defects in perovskite and adjusting the growth of perovskite crystals through modifying multifunctional molecules (DTD) on the surface of NiOx. DTD has multifunctional targeting groups that enable it to interact strongly with both perovskite and NiOx simultaneously, thereby building a molecular bridge at the NiOx/perovskite buried interface, enabling high-quality upper perovskite films, excellent interface contact and more matched energy levels between perovskite and NiOx. As a result, the modification of DTD significantly improves the efficiency of perovskite devices from 22.19 % to 25.00 % (certified value of 24.12 %), along with excellent long-term and operational stability. This strategy provides a simple and effective targeted therapy for the buried interface in PSC, achieving high efficiency and stability.

Exogenous melatonin alleviates sodium chloride stress and increases vegetative growth in Lonicera japonica seedlings via gene regulation

Melatonin (Mt) functions as a growth regulator and multifunctional signaling molecule in plants, thereby playing a crucial role in promoting growth and orchestrating protective responses to various abiotic stresses. However, the mechanism whereby exogenous Mt protects Lonicera japonica Thunb. (L. japonica) against salt stress has not been fully elucidated. Therefore, this study aimed to elucidate how exogenous Mt alleviates sodium chloride (NaCl) stress in L. japonica seedlings. Salt-sensitive L. japonica seedlings were treated with an aqueous solution containing 150 mM of NaCl and aqueous solutions containing various concentrations of Mt. The results revealed that treatment of NaCl-stressed L. japonica seedlings with a 60 µM aqueous solution of Mt significantly enhanced vegetative plant growth by scavenging reactive oxygen species and thus reducing oxidative stress. The latter was evidenced by decreases in electrical conductivity and malondialdehyde (MDA) concentrations. Moreover, Mt treatment led to increases in the NaCl-stressed L. japonica seedlings’ total chlorophyll content, soluble sugar content, and flavonoid content, demonstrating that Mt treatment improved the seedlings’ tolerance of NaCl stress. This was also indicated by the NaCl-stressed L. japonica seedlings exhibiting marked increases in the activities of antioxidant enzymes (superoxide dismutase, peroxidase, catalase, and ascorbate peroxidase) and in photosynthetic functions. Furthermore, Mt treatment of NaCl-stressed L. japonica seedlings increased their expression of phenylalanine ammonia-lyase 1 (PAL1), phenylalanine ammonia-lyase 2 (PAL2), calcium-dependent protein kinase (CPK), cinnamyl alcohol dehydrogenase (CAD), flavanol synthase (FLS), and chalcone synthase (CHS). In conclusion, our results demonstrate that treatment of L. japonica seedlings with a 60 µM aqueous solution of Mt significantly ameliorated the detrimental effects of NaCl stress in the seedlings. Therefore, such treatment has substantial potential for use in safeguarding medicinal plant crops against severe salinity.

IOS-1002, a Stabilized HLA-B57 Open Format, Exerts Potent Anti-Tumor Activity.

HLA-B27 and HLA-B57 are associated with autoimmunity and long-term viral control and protection against HIV and HCV infection; however, their role in cancer immunity remains unknown. HLA class I molecules interact with innate checkpoint receptors of the LILRA, LILRB and KIR families present in diverse sets of immune cells. Here, we demonstrate that an open format (peptide free conformation) and expression- and stability-optimized HLA-B57-B2m-IgG4_Fc fusion protein (IOS-1002) binds to human leukocyte immunoglobulin-like receptor B1 and B2 (LILRB1 and LILRB2) and to killer immunoglobulin-like receptor 3DL1 (KIR3DL1). In addition, we show that the IgG4 Fc backbone is required for engagement to Fcγ receptors and potent activation of macrophage phagocytosis. IOS-1002 blocks the immunosuppressive ITIM and SHP1/2 phosphatase signaling cascade, reduces the expression of immunosuppressive M2-like polarization markers of macrophages and differentiation of monocytes to myeloid-derived suppressor cells, enhances tumor cell phagocytosis in vitro and potentiates activation of T and NK cells. Lastly, IOS-1002 demonstrates efficacy in an ex vivo patient-derived tumor sample tumoroid model. IOS-1002 is a first-in-class multi-target and multi-functional human-derived HLA molecule that activates anti-tumor immunity and is currently under clinical evaluation.

The role of melatonin in delaying senescence and maintaining quality in postharvest horticultural products.

The postharvest lifespan of horticultural products is closely related to loss of nutritional quality, accompanied by a rapid decline in shelf life, commercial value, and marketability. Melatonin (MT) application not only maintains quality but also delays senescence in horticultural products. This paper reviews biosynthesis and metabolism of endogenous MT, summarizes significant effects of exogenous MT application on postharvest horticultural products, examines regulatory mechanisms of MT-mediated effects, and provides an integrated review for understanding the positive role of MT in senescence delay and quality maintenance. As a multifunctional molecule, MT coordinates other signal molecules, such as ABA, ETH, JA, SA, NO, and Ca2+, to regulate postharvest ripening and senescence. Several metabolic pathways are involved in regulation of MT during postharvest senescence, including synthesis and signal transduction of plant hormones, redox homeostasis, energy metabolism, carbohydrate metabolism, and degradation of pigment and cell wall components. Moreover, MT regulates expression of genes related to plant hormones, antioxidant systems, energy generation, fruit firmness and colour, membrane integrity, and carbohydrate storage. Consequently, MT could become an emerging and eco-friendly preservative to extend shelf life and maintain postharvest quality of horticultural products.

Convergent synthesis, kinetics and computational attributions of indole-N-phenyltriazole hybrids bearing N-(aryl)butanamides as alkaline phosphatase inhibitors

In the research delineate herein, an innovative sequence of new series of multi-functional target molecules (9a-i) having indole-N-phenyltriazole bi-heterocyclic hybrids unified with N-arylated butanamides was synthesized as alkaline phosphatase inhibitor. The structural validation of all the formulated compounds was accomplished through IR, EI-MS, 1H NMR, 13C NMR and CHN analysis data. The in vitro enzyme inhibitory investigation revealed the efficacy of these bi-heterocyclic derivatives, 9a–i, as potent inhibitors of alkaline phosphatase relative to the standard used. The compound 9h was found to be the most active compound (IC50 = 0.062 ± 0.017 μM), and its inhibitory activity is about 10 times higher than potassium dihydrogen phosphate (KH2PO4) (IC50 = 5.251 ± 0.468 μM). The kinetics mechanism was attributed by evaluating the Lineweaver–Burk plots, which revealed that compound 9h inhibited the alkaline phosphatase non-competitively to form an enzyme–inhibitor complex. The inhibition constant Ki determined from Dixon plots for this compound was 0.045 μM. The computational study was in full agreement with the experimental records and these ligands exhibited good interactions and binding energy values. These molecules also demonstrated mild cytotoxicity toward red blood cell membranes when analyzed through hemolysis. So, based on the presented results, these molecules, being the promising inhibitors of alkaline phosphatase, might be deliberated as suitable medicinal scaffolds to render normal calcification of bones and teeth.

The impact of histone lactylation on the tumor microenvironment and metabolic pathways and its potential in cancer therapy.

The complexity of cancer is intricately linked to its multifaceted biological processes, including the roles of the tumor microenvironment (TME) as well as genetic and metabolic regulation. Histone lactylation has recently emerged as a novel epigenetic modification mechanism that plays a pivotal role in regulating cancer initiation, proliferation, invasion, and metastasis. This review aims to elucidate the role of histone lactylation in modulating various aspects of tumor biology, including DNA repair mechanisms, glycolytic metabolic abnormalities, functions of non-tumor cells in the TME, and the promotion of tumor inflammatory responses and immune escape. Additionally, the review explores potential therapeutic strategies targeting histone lactylation. A comprehensive literature review was performed, analyzing recent findings on histone lactylation and its impact on cancer biology. This involved a systematic examination of studies focusing on biochemical pathways, cellular interactions, and clinical implications related to histone lactylation. Histone lactylation was identified as a critical regulator of tumor cell DNA repair mechanisms and glycolytic metabolic abnormalities. It also significantly influences the functions of non-tumor cells within the TME, promoting tumor inflammatory responses and immune escape. Moreover, histone lactylation acts as a multifunctional biological signaling molecule impacting immune responses within the TME. Various cell types within the TME, including T cells and macrophages, were found to regulate tumor growth and immune escape mechanisms through lactylation. Histone lactylation offers a novel perspective on tumor metabolism and its role in cancer development. It presents promising opportunities for the development of innovative cancer therapies. This review underscores the potential of histone lactylation as a therapeutic target, paving the way for new strategies in cancer treatment.

Tailoring Niox/Perovskite Interface via a Multifunctional Self‐Assembled Molecule for High‐Performance Blue Perovskite Light‐Emitting Diodes

Nickel oxide (NiOx) serves as one of the most promising hole transport materials for perovskite light‐emitting diodes (PeLEDs). However, only moderate PeLED performances have been reported on the pristine NiOx layer due to insufficient hole injection, interfacial exciton quenching, and poor perovskite quality. Herein, a multifunctional molecule of 3‐mercapto‐1‐propanesulfonate (MPS) is demonstrated to successfully tailor the NiOx–perovskite heterogenous interface by addressing the above issues. In detail, the large binding energy between mercapto sulfur and nickel induces preferential self‐assembly of the mercapto group on the NiOx surface, which simultaneously enlarges the NiOx work function by the formation of interfacial dipole and suppresses the trap‐assisted exciton quenching by the passivation of the oxygen vacancies. Meanwhile, the self‐assembled MPS on NiOx also favors high‐quality perovskite films with good morphology, high crystallinity, and reduced defects for efficient carrier radiative recombination. As a result, blue PeLEDs show a remarkable efficiency of 10.4%, representing one of the highest efficiencies for NiOx‐based blue PeLEDs, as well as a very low turn‐on voltage of 2.8 V. Consequently, this work contributes to an efficient approach to tailor the NiOx–perovskite interface for highly efficient blue PeLEDs.

CircRNAs as Epigenetic Regulators of Integrity in Blood-Brain Barrier Architecture: Mechanisms and Therapeutic Strategies in Multiple Sclerosis.

Multiple sclerosis (MS) is a chronic inflammatory neurodegenerative disease leading to progressive demyelination and neuronal loss, with extensive neurological symptoms. As one of the most widespread neurodegenerative disorders, with an age onset of about 30 years, it turns out to be a socio-health and economic issue, thus necessitating therapeutic interventions currently unavailable. Loss of integrity in the blood-brain barrier (BBB) is one of the distinct MS hallmarks. Brain homeostasis is ensured by an endothelial cell-based monolayer at the interface between the central nervous system (CNS) and systemic bloodstream, acting as a selective barrier. MS results in enhanced barrier permeability, mainly due to the breakdown of tight (TJs) and adherens junctions (AJs) between endothelial cells. Specifically, proinflammatory mediator release causes failure in cytoplasmic exposure of junctions, resulting in compromised BBB integrity that enables blood cells to cross the barrier, establishing iron deposition and neuronal impairment. Cells with a compromised cytoskeletal protein network, fiber reorganization, and discontinuous junction structure can occur, resulting in BBB dysfunction. Recent investigations on spatial transcriptomics have proven circularRNAs (circRNAs) to be powerful multi-functional molecules able to epigenetically regulate transcription and structurally support proteins. In the present review, we provide an overview of the recent role ascribed to circRNAs in maintaining BBB integrity/permeability via cytoskeletal stability. Increased knowledge of the mechanisms responsible for impairment and circRNA's role in driving BBB damage and dysfunction might be helpful for the recognition of novel therapeutic targets to overcome BBB damage and unrestrained neurodegeneration.

Synergistically Regulating CBD‐SnO2/Perovskite Buried Interface for Efficient FAPbI3 Perovskite Solar Cells

AbstractTin oxide (SnO2) based on chemical bath deposition method (CBD‐SnO2) is considered as an ideal electron transporting layer for perovskite solar cells (PSCs), however, the research on precise regulation toward CBD‐SnO2 layer is lacking. Here, the study introduces a multifunctional molecule, potassium 2‐(N‐morpholino)ethanesulfonate (MES‐K), on the surface of CBD‐SnO2 layer to synergistically modify the buried interface between the SnO2 and perovskite. It is found that MES‐K introduction can passivate interfacial defects, favor the perovskite crystal growth, and improve carrier transportation. 25.14% efficiency of small‐size perovskite solar cells has been achieved with 24.45% efficiency of 1 cm2 perovskite devices, with negligible hysteresis. Besides, unencapsulated devices based on CBD‐SnO2 can maintain > 95% of its initial efficiency after 2000 h storage at ambient environment, and > 90% after 1000 h LED illumination.

Engineering a GPCR-based yeast biosensor for a highly sensitive melatonin detection from fermented beverages

Melatonin is a multifunctional molecule with diverse biological roles that holds great value as a health-promoting bioactive molecule in any food product and yeast’s ability to produce it has been extensively demonstrated in the last decade. However, its quantification presents costly analytical challenges due to the usual low concentrations found as the result of yeast metabolism. This study addresses these analytical challenges by optimizing a yeast biosensor based on G protein-coupled receptors (GPCR) for melatonin detection and quantitation. Strategic genetic modifications were employed to significantly enhance its sensitivity and fluorescent signal output, making it suitable for detection of yeast-produced melatonin. The optimized biosensor demonstrated significantly improved sensitivity and fluorescence, enabling the screening of 101 yeast strains and the detection of melatonin in various wine samples. This biosensor’s efficacy in quantifying melatonin in yeast growth media underscores its utility in exploring melatonin production dynamics and potential applications in functional food development. This study provides a new analytical approach that allows a rapid and cost-effective melatonin analysis to reach deeper insights into the bioactivity of melatonin in fermented products and its implications for human health. These findings highlight the broader potential of biosensor technology in streamlining analytical processes in fermentation science.

Multi-Template-Guided Synthesis of High-Dimensional Molecular Assemblies for Humidity Gradient-Based Power Generators.

Systematically orchestrating fundamental building blocks into intricate high-dimensional molecular assemblies at molecular level is imperative for multifunctionality integration. However, this remains a formidable task in crystal engineering due to the dynamic nature of inorganic building blocks. Herein, we develop a multi-template-guided strategy to control building blocks. The coordination modes of ligands and the spatial hindrance of anionic templates are pivotal in dictating the overall structures. Flexible multi-dentate linkers selectively promote the formation of oligomeric assembly ([TeO3(Mo2O2S2)3O2(OH)(C5O2H7)3]4- {TeMo6}) into tetrahedral cages ([(TeO3)4(Mo2O2S2)12(OH)12(C9H9O4P)6]8- {Te4Mo24} and [(AsO4)4(Mo2O2S2)12(OH)12(C9H9O6)4]12- {As4Mo24}), while steric hindrance from anionic templates further assists in assembling cages into an open quadruply twisted Möbius nanobelt ([(C6H5O3P)8(Mo2O2S2)24(OH)24(C8H10O4)12]16- {P8Mo48}). Among these structures, the hydrophilic-hydrophobic hybrid cage {Te4Mo24} emerges as an exemplary molecular model for proton conduction and serves as a prototype for humidity gradient-based power generators (HGPGs). The Te4Mo24-PVDF-based HGPG (PVDF=Poly(vinylidene fluoride)) exhibits notable stability and power generation, yielding an open-circuit voltage of 0.51 V and a current density of 77.8 nA cm-2 at room temperature and 90 % relative humidity (RH). Further insights into the interactions between water molecules and microscale molecules within the generator are achieved through molecular dynamics simulations. This endeavor unveils a universal strategy for synthesizing multifunctional integration molecules.

Multi‐Template‐Guided Synthesis of High‐Dimensional Molecular Assemblies for Humidity Gradient‐Based Power Generators

Systematically orchestrating fundamental building blocks into intricate high‐dimensional molecular assemblies at molecular level is imperative for multifunctionality integration. However, this remains a formidable task in crystal engineering due to the dynamic nature of inorganic building blocks. Herein, we develop a multi‐template‐guided strategy to control building blocks. The coordination modes of ligands and the spatial hindrance of anionic templates are pivotal in dictating the overall structures. Flexible multi‐dentate linkers selectively promote the formation of oligomeric assembly ([TeO3(Mo2O2S2)3O2(OH)(C5O2H7)3]4‐ {TeMo6}) into tetrahedral cages ([(TeO3)4(Mo2O2S2)12(OH)12(C9H9O4P)6]8‐ {Te4Mo24} and [(AsO4)4(Mo2O2S2)12(OH)12(C9H9O6)4]12‐ {As4Mo24}), while steric hindrance from anionic templates further assists in assembling cages into an open quadruply twisted Möbius nanobelt ([(C6H5O3P)8(Mo2O2S2)24(OH)24(C8H10O4)12]16‐ {P8Mo48}). Among these structures, the hydrophilic‐hydrophobic hybrid cage {Te4Mo24} emerges as an exemplary molecular model for proton conduction and serves as a prototype for humidity gradient‐based power generators (HGPGs). The Te4Mo24‐PVDF‐based HGPG (PVDF = Poly(vinylidene fluoride)) exhibits notable stability and power generation, yielding an open‐circuit voltage of 0.51 V and a current density of 77.8 nA cm‐2 at room temperature and 90% relative humidity (RH). Further insights into the interactions between water molecules and microscale molecules within the generator are achieved through molecular dynamics simulations. This endeavor unveils a universal strategy for synthesizing multifunctional integration molecules.

A molecule with aggregation-induced emission for the pH sensing and anti-counterfeiting applications

In this paper, a meaningful pH sensor (E)-4-(4-(1,2,2-triphenylvinyl) styryl)quinoline (TPQ) with aggregation-induced emission (AIE) effect was synthesized based on the conjugated 4-(1,2,2-triphenylvinyl)benzaldehyde and 4-methylquinoline connected by a CC bond. The conjugated quinoline moiety acts as a proton acceptor, and the small variations of pH value in the linear range of 4.01–7.03 and 7.96–9.45 can cause obvious fluorescence fluctuations. The TPQ has good selectivity and reversibility in pH detection, and importantly, it can detect pH fluctuations in real-time in practical applications by fluorescent means. Moreover, TPQ can also be used as a potential viscosity fluorescence sensor for organic solvents. In addition, by combining various color changes of TPQ caused by acid, alkali, water and ammonia stimulation under sunlight and 365 nm ultraviolet light irradiation, it provides a novel concealed optical anti-counterfeiting technique with high security. Therefore, TPQ is a multifunctional molecule with great potential for applications in pH, viscosity sensing and anti-counterfeiting.

A novel chemically engineered multifunctional statin conjugate as self-assembled nanoparticles inhibiting bile acid transporters

Statins are widely used to treat hyperlipidemia; however, their mechanism—inhibiting cholesterol production without promoting its utilization—causes problems, such as inducing diabetes. In our research, we develop, for the first time, a chemically engineered statin conjugate that not only inhibits cholesterol production but also enhances its consumption through its multifunctional properties. The novel rosuvastatin (RO) and ursodeoxycholic acid (UDCA) conjugate (ROUA) is designed to bind to and inhibit the core of the apical sodium-dependent bile acid transporter (ASBT), effectively blocking ASBT's function in the small intestine, maintaining the effect of rosuvastatin. Consequently, ROUA not only preserves the cholesterol-lowering function of statins but also prevents the reabsorption of bile acids, thereby increasing cholesterol consumption. Additionally, ROUA's ability to self-assemble into nanoparticles in saline—attributable to its multiple hydroxyl groups and hydrophobic nature—suggests its potential for a prolonged presence in the body. The oral administration of ROUA nanoparticles in animal models using a high-fat or high-fat/high-fructose diet shows remarkable therapeutic efficacy in fatty liver, with low systemic toxicity. This innovative self-assembling multifunctional molecule design approach, which boosts a variety of therapeutic effects while minimizing toxicity, offers a significant contribution to the advancement of drug development.