Multi-electron Transfer Process Research Articles

Steering the Orbital Hybridization to Boost the Redox Kinetics for Efficient Li-CO2 Batteries.

The sluggish CO2 reduction and evolution reaction kinetics are thorny problems for developing high-performance Li-CO2 batteries. For the complicated multiphase reactions and multielectron transfer processes in Li-CO2 batteries, exploring efficient cathode catalysts and understanding the interplay between structure and activity are crucial to couple with these pendent challenges. In this work, we applied the CoS as a model catalyst and adjusted its electronic structure by introducing sulfur vacancies to optimize the d-band and p-band centers, which steer the orbital hybridization and boost the redox kinetics between Li and CO2, thus improving the discharge platform of Li-CO2 batteries and altering the deposition behavior of discharge products. As a result, a highly efficient bidirectional catalyst exhibits an ultrasmall overpotential of 0.62 V and a high energy efficiency of 82.8% and circulates stably for nearly 600 h. Meanwhile, density functional theory calculations and multiphysics simulations further elucidate the mechanism of bidirectional activity. This work not only provides a proof of concept to design a remarkably efficient catalyst but also sheds light on promoting the reversible Li-CO2 reaction by tailoring the electronic structure.

Delocalized Orbitals Over Metal Clusters and Organic Linkers Enable Boosted Charge Transfer in Metal-Organic Framework for Overall CO2 Photoreduction.

The conversion of CO2 to C2 through photocatalysis poses significant challenges, and one of the biggest hurdles stems from the sluggishness of the multi-electron transfer process. Herein, taking metal-organic framework (PFC-98) as a model photocatalyst, we report a new strategy to facilitate charge separation. This strategy involves matching the energy levels of the lowest unoccupied node and linker orbitals of the MOF, thereby creating the lowest unoccupied crystal orbital (LUCO) delocalized over both the node and linker. This feature enables the direct excitation of electrons from photosensitive linker to the catalytic centers, achieving a direct charge transfer (DCT) pathway. For comparison, an isoreticular MOF (PFC-6) based on analogue components but with far apart frontier energy level was synthesized. The delocalized LUCO caused the presence of an internal charge-separated state (ICS), prolonging the excited state lifetime and further inhibiting the electron-hole recombination. The presence of an internal charge-separated state (ICS) prolongs the excited state lifetime and further inhibits the electron-hole recombination. Moreover, it also induced abundant electrons accumulating at the catalytic sites, enabling the multi-electron transfer process. As a result, the material featuring delocalized LUCO exhibits superior overall CO2 photocatalytic performance with high C2 production yield and selectivity.

Reduction of Ketones and Coupling of Ketyls by a Zn-Zn-Bonded Compound.

The α-diimine-ligated Zn-Zn-bonded compound [K(THF)2]2[LZn-ZnL] (1, L = [(2,6-iPr2C6H3)NC(Me)]22-) displays diverse reactivities toward a variety of ketones. In the reaction of 1 with benzophenone or 4,4'-di-tert-butylbenzophenone, a multielectron transfer process was observed to give bimetallic (Zn/K) complexes with both ketyl radical fragments and C-C coupled pinacolate moieties (products 2 and 3). In contrast, treating 1 with 9-fluorenone only afforded pinacolate complex 5. Moreover, the reactions of 1 with N- or O-heterocycle-functionalized ketones, i.e., di(2-pyridyl)ketone, 2,2-pyrrolidinone, 9-xanthenone, or 10-methyl-9(10H)-acridone, were also carried out. Besides different transformations of the ketone moiety, the heteroatoms (nitrogen or oxygen) are also involved in coordination with zinc or potassium ions, yielding discrete aggregates or polymeric structures of products 6-9.

Locally Varying Surface Binding Affinity on Pd-Au Nanocrystals Enhances Electrochemical Ethanol Oxidation Activity.

Noble metal nanocrystals face challenges in effectively catalyzing electrochemical ethanol oxidation reaction (EOR)-represented multistep, multielectron transfer processes due to the linear scaling relationship among binding energies of intermediates, impeding independent optimization of individual elemental steps. Herein, we develop noble metal nanocrystals with a range of local surface binding affinities in close proximity to overcome this challenge. Experimentally, this is demonstrated by applying tensile strain to a Pd surface and decorating it with discrete Au atoms, forming a diversity of binding sites with varying affinities in close proximity for guest molecules, as evidenced by CO probing and density functional theory calculations. Such a surface enables reaction intermediates to migrate between different binding sites as needed for each elemental step, thereby reducing the energy barrier for the overall EOR when compared to reactions at a single site. On these tailored surfaces, we attain specific and mass activities of 32.7 mA cm-2 and 47.8 A mgPd-1 in EOR, surpassing commercial Pd/C by 10.9 and 43.8 times, respectively, and outperforming state-of-the-art Pd-based catalysts. These results highlight the promise of this approach in improving a variety of multistep, multielectron transfer reactions, which are crucial for energy conversion applications.

Construction of indirect dual S-scheme heterojunction CN/AP/AW mediated by Ag nanoparticles enables efficient CO2-to-CH4 photoreduction

The highly selective product generation of photocatalytic CO2 reduction is greatly hampered by the multi-electron transfer process. In this work, Ag nanoparticle mediated indirect dual S-scheme compact heterojunction CN/AP/AW was successfully prepared through varying the ratio of Na2HPO4·12H2O and Na2WO4·2H2O. In pure water, the formation rate and selectivity of CH4 reached 18.49 μmol·g−1·h−1 and 94.3 % under simulated sunlight, with a sharp contrast to CN without CH4. The multi-channel directional transfer of electrons was realized by the construction of heterojunction, which also overcomes the inherent low REDOX capacity issues of conventional type-I and type-II heterojunction. In addition to addressing the weak interfacial contact that often occurs in terpolymer, Ag nanoparticles further accelerate electron transfer as an electron capturer, resulting in rapid unwanted electron-hole recombination. Possible reaction pathways and the cause of high selectivity were predicted by in situ FT-IR. This work provides guidance for the directional and efficient generation of CO2-to-CH4.

Ultra-Low-Potential Methanol Oxidation on Single-Ir-Atom Catalyst.

Methanol oxidation plays a central role to implement sustainable energy economy, which is restricted by the sluggish reaction kinetics due to the multi-electron transfer process accompanied by numerous sequential intermediate. In this study, an efficient cascade methanol oxidation reaction is catalyzed by single-Ir-atom catalyst at ultra-low potential (<0.1 V) with the promotion of the thermal and electrochemical integration in a high temperature polymer electrolyte membrane electrolyzer. At the elevated temperature, the electron deficient Ir site with higher methanol affinity could spontaneous catalyze the CH3OH dehydrogenation to CO under the voltage, then the generated CO and H2 was electrochemically oxidized to CO2 and proton. However, the methanol cannot thermally decompose with the voltage absence, which confirm the indispensable of the coupling of thermal and electrochemical integration for the methanol oxidation. By assembling the methanol oxidation reaction with hydrogen evolution reaction with single-Ir-atom catalysts in the anode chamber, a max hydrogen production rate reaches 18 mol gIr -1 h-1, which is much greater than that of Ir nanoparticles and commercial Pt/C. This study also demonstrated the electrochemical methanol oxidation activity of the single atom catalysts, which broadens the renewable energy devices and the catalyst design by an integration concept.

Enhancing Efficiency and High-Value Chemicals Generation through Coupling Photocatalytic CO2 Reduction with Propane Oxidation.

Conversion of CO2 into high-value chemicals using solar energy is one of promising approaches to achieve carbon neutrality. However, the oxidation of water in the photocatalytic CO2 reduction is kinetically unfavorable due to multi-electron and proton transfer processes, along with the difficulty in generating O-O bonds. To tackle these challenges, this study investigated the coupling reaction of photocatalytic CO2 reduction and selective propane oxidation using the Pd/P25 (1 wt%) catalyst. Our findings reveal a significant improvement in CO2 reduction, nearly fivefold higher, achieved by substituting water oxidation with selective propane oxidation. This substitution not only accelerates the process of CO2 reduction but also yields valuable propylene. The relative ease of propane oxidation, compared to water, appears to increase the density of photogenerated electrons, ultimately enhancing the efficiency of CO2 reduction. We further found that hydroxyl radicals and reduced intermediate (carboxylate species) played important roles in the photocatalytic reaction. These findings not only propose a potential approach for the efficient utilization of CO2 through the coupling of selective propane oxidation into propylene, but also provide insights into the mechanistic understanding of the coupling reaction.

Homeostatic Solid Solution Reaction in Phosphate Cathode: Breaking High-Voltage Barrier to Achieve High Energy Density and Long Life of Sodium-Ion Batteries.

The stable phase transformation during electrochemical progress drives extensive research on vanadium-based polyanions in sodium-ion batteries (SIBs), especially Na3 V2 (PO4 )3 (NVP). And the electron transfer between V3+/4+ redox couple in NVP could be generally achieved, owing to the confined crystal variation during battery service. However, the more favorable V4+/5+ redox couple is still in hard-to-access situation due to the high barrier and further brings about the corresponding inefficiency in energy densities. In this work, the multilevel redox in NVP frame (MLNP) alters reaction pathway to undergo homeostatic solid solution process and breaks the high barrier of V4+/5+ at high voltage, taking by progressive transition metal (V, Fe, Ti, and Cr) redox couple. The diversified reaction paths across diffusion barriers could be realized by distinctive release/uptake of inactive Na1 site, confirmed by the calculations of density functional theory. Thereby its volume change is merely 1.73% during the multielectron-transfer process (≈2.77 electrons). MLNP cathode could achieve an impressive energy density of 440Wh kg-1 , driving the leading development of MLNP among other NASICON structure SIBs. The integration of multiple redox couples with low strain modulates the reaction pathway effectively and will open a new avenue for fabricating high-performance cathodes in SIBs.

Engineering low-coordination atoms on RhPt bimetallene for 12-electron ethanol electrooxidation

The three-dimensional perforated RhPt bimetallene achieves a high exposure ratio of low-coordinated RhPt diatomic sites, demonstrating excellent activity and remarkable selectivity for 12-electron ethanol oxidation to CO2.

(Invited) Understanding and Optimization of Versatile Molecular and Coordination Polymer-Based 3d Transition Metal Oxygen Evolution Reaction Catalysts

The demanding multi-electron transfer process renders the oxygen evolution reaction (OER) a bottleneck for achieving efficient clean hydrogen generation via water electrolysis.[1] Over the past decades, two main categories of catalysts, namely, homogeneous molecular and heterogeneous catalysts, have been implemented for the OER. However, due to the sluggish reaction kinetics and the aggressive reaction media of the OER, the structural integrity of both homogeneous molecular and heterogeneous catalysts faces the dramatic challenges. This calls for a thorough understanding and close monitoring of OER catalysts under their operando reaction conditions.Over the last years, we have been combining a variety of in situ/operando spectroscopy approaches with computational studies toward the comprehensive understanding of our designed catalysts at the atomic level. With this information in hand, we established a full identification of catalytically active species and sites for several systems, some of which are discussed here.First, inspired by nature’s {Mn4CaOx} OER complexes, we recently reported on the design of a tetramer Cu-bipyridyl complex for the OER.[2] Structural characterizations demonstrated a new defect-cubane structure of our designed complex, [Cu4(pyalk)4(OAc)4](ClO4)(HNEt3). We found that this Cu-bipyridyl complex can further undergo structural transformations into two unique complexes under different solution conditions, namely Cu-dimer and Cu-monomers, as revealed by in situ UV-vis and ERP characterizations as well as electrospray ionization mass spectrometry. Specifically, the Cu-monomers can be only formed in presence of carbonate buffer (pH 10.5). Otherwise, the structural transformation into a Cu-dimer complex [Cu2(pyalk)2(OAc)2(H2O)] is dominant under solution conditions. Furthermore, electrochemical characterizations revealed an overpotential of 960 mV to reach a current density of 0.1 mA/cm2 of our designed Cu-dimer catalysts, which is comparable with significant Cu-based OER electrocatalysts. To gain in-depth insights into their conversion processes, postcatalytic characterizations of Cu-based molecular catalysts were carried out based on X-ray photoelectron/absorption (XAS/XPS) spectroscopy appraoches. The results showed that nanosized Cu-oxide-based species were formed in situ in Cu-based molecular catalysts after the OER. Our study highlights the crucial role of the structural integrity of molecular catalysts in solutions for their efficient design.In parallel, we explored the structural transformations of heterogeneous electrocatalysts during the OER. As a typical example, we developed a cost-effective and high-performance NiFe-based coordination polymer (referred to as NiFe-CP) as OER electrocatalyst, which is being investigated as the best-known bimetallic combination for the OER.[3] A central element of our study is the monitoring of true catalytically active species. Results from spectroscopic characterizations revealed a kinetic restructuring of NiFe-CPs into NiFe (oxy)hydroxides during the OER. To further improve the OER activity, we introduced a facile NaBH4-assisted reduction strategy to prepare low-crystalline reduced NiFe-CP (denoted as R-NiFe-CP) OER electrocatalysts with rich structural deficiencies. These catalysts can maintain a very low overpotential of 225 mV at 10 mA/cm2 for over 120 h without any performance decline, outperforming many recent reported bimetallic OER electrocatalysts. As revealed by XAS characterizations and density functional theory (DFT) calculations, engineering of structural deficiencies not only tunes the local electronic structure but also optimizes the rate-determining step towards facilitated OH- adsorption. Noteworthy, the true OER active sites of R-NiFe-CPs originate from the in situ reconstructed Ni-O-Fe motifs. However, fundamental questions, as to (a) the role of engineered structural deficiencies in the generation of active species and (b) facilitating the formation of catalytically active dual oxygen-bridged moieties, need to be answered. Combination of time-resolved operando XAS monitoring and DFT calculations enables the tracking and understanding of the kinetic changes of active species and sites under the operando reaction conditions. We found that the OER of R-NiFe-CPs relies on the in situ formation of crucial high-valent NiIV-O-FeIVO moieties.[4] Furthermore, an anionic engineering strategy through heteroatom sulfur incorporation was carried out to obtain S-R-NiFe-CP showing faster OER kinetics. Importantly, engineered sulfur content promotes the generation of catalytically active S-NiIVO-FeIVO motifs prior to the OER. This offers a lower onset potential to trigger the OER of S-R-NiFe-CPs compared to sulfur-free R-NiFe-CPs. Moreover, our results also suggest a dual-site mechanism pathway of S-R-NiFe-CPs during the OER, in which the O-O bond formed atop the S-NiIVO-FeIVO moieties. Such an anionic modulation strategy for promoting the formation of catalytically active structural moieties and for optimizing the OER kinetics opens an avenue to optimize a wide range of heterogeneous catalysts for the OER.[1] Zhao, Y. et al. Chem. Rev. 2023 , doi.org/10.1021/acs.chemrev.2c00515.[2] Adiyeri Saseendran, D. P. et al. Chem. Comm. 2023, In Revision.[3] Zhao, Y. et al. Adv. Energy Mater. 2020, 10, 2002228.[4] Zhao, Y. et al. ACS Nano 2022, 16, 15318-15327.

W-based MOF derived ZnWO4/ZnO@C hierarchical nanoflakes with superior lithium storage performance

Tungstate-based materials as lithium-ion battery anodes have drawn multitudinous attention owing to their great theoretical capacity and typical multielectron transfer process. Nevertheless, their slow electrochemical reaction kinetics and big volume variation often trigger poor lithium storage properties. Herein, novel ZnWO4/ZnO@C hierarchical nanoflakes are engineered via a facile W-based metal-organic framework (W-MOF) template method. The ZnWO4/ZnO@C nanoflakes with a rectangular shape and high porosity are constructed by carbon-coated nanocrystal subunits. The unique composition and microstructure of ZnWO4/ZnO@C can shorten the pathway for Li+/electron transport, expand the contact with the electrolyte, improve the electrical conductivity, and fortify structural stability. Consequently, the ZnWO4/ZnO@C material as LIBs anodes delivers a high reversible capacity of 734 mAh g-1 after 150 cycles at 200 mA g-1, decent rate capability (426 mAh g-1 at 1000 mA g-1), and outstanding cyclic stability (93.8 % capacity retention over 350 cycles at 500 mA g-1). The in-situ XRD combined with ex-situ XPS and FT-IR was performed to elucidate the lithium storage mechanism of ZnWO4/ZnO@C. This work presents a simple and efficient approach for the synthesis of novel tungstate-based anodes for lithium-ion battery applications.

Nanosheet-assembled transition metal sulfides nanoflowers derived from CoMo-MOF for efficient oxygen evolution reaction

Oxygen evolution reaction (OER) is a multi-electron transfer process, whose intrinsic sluggish dynamic restricts the whole process of overall water splitting (OWS). To address this issue, a porous transition metal sulfide (TMS) catalyst with rich heterojunctions was prepared by vulcanization and trace Fe doping of CoMo-based metal–organic framework (MOF). In this work, the nanoflower composed of ultrathin 2D nanosheets anchored on a nickel foam presents a layered interface that contributes to the exposure of active regions. The resulting electrode denoted as Fe@CoMo2S4/Ni3S2/NF required a low overpotential (η10 = 167 mV @ 10 mA cm−2, η50 = 260 mV @ 50 mA cm−2) in 1.0 M KOH for OER and a small cell voltage (E = 1.513 V @ 10 mA cm−2) to power OWS when coupled with commercial Pt/C. It also exhibited splendid morphological and chemical stability with virtually invariant polarization curve and flower-like appearance after 1000 CV cycles, as well as long-term durability over 100 h with a constant current density of 10 mA cm−2. This work revealed the multi-anionic regulation mechanism in the surface reconstruction of sulfide electrocatalysts, and verified that Co/Mo/Ni-based oxysulfide was the true active substance of OER, which inspired the understanding and design of multi-anionic regulated electrocatalysts.

Defect-rich Cu@CuTCNQ composites for enhanced electrocatalytic nitrate reduction to ammonia

Electrochemical conversion of nitrate (NO3−) pollutants into chemical feedstock and fuel ammonia (NH3) can contribute to sustainable mitigation of the current severe energy and environmental crises. However, the electrocatalytic NO3− reduction to NH3 (NRA) involves a sluggish multielectron and proton transfer process that competes with the hydrogen evolution reaction (HER) in aqueous media, imposing great challenges in developing highly selective catalysts for NRA. In this study, we developed a copper and copper-tetracyanoquinodimethane composite catalyst (Cu@CuTCNQ), which possesses a high density of copper vacancy defects. This catalyst has been proven to be efficient for NRA through an in situ electrochemical reconstruction method. The structural evolution of CuTCNQ during NRA was investigated by in situ Raman spectroscopy, which indicated an accelerated charge transfer from the CuTCNQ substrate to the derived Cu, which facilitated the adsorption activation of NO3−. The obtained Cu@CuTCNQ exhibited an excellent catalytic performance for NRA, with a Faradaic efficiency of 96.4% and productivity of 144.8 μmol h−1 cm−2 at −0.6 V vs. a reversible hydrogen electrode, superior to Cu nanoparticle counterparts and most Cu-based catalysts. Cu vacancy defects and sufficient interfacial charge transfer synergistically optimize the charge distribution of Cu active sites, reduce the energy barrier for NO3− adsorption, and promote deoxidation and hydrogenation processes, thus enhancing NRA and selectivity.

Facilitating interface charge transfer via constructing NiO/NiCo2O4 heterostructure for oxygen evolution reaction under alkaline conditions

Designing high-activity electrocatalysts to enhance the slow multielectron-transfer process of the oxygen evolution reaction (OER) is of great importance for hydrogen generation. Here, we employ hydrothermal and subsequent heat-treatment strategies to acquire nanoarrays-structured NiO/NiCo2O4 heterojunction anchored Ni foam (NiO/NiCo2O4/NF) as efficient materials for catalyzing the OER in an alkaline electrolyte. Density functional theory (DFT) results demonstrate that NiO/NiCo2O4/NF exhibits a smaller overpotential than those of single NiO/NF and NiCo2O4/NF owing to interface-triggered numerous interface charge transfer. Moreover, the superior metallic characteristics of NiO/NiCo2O4/NF further enhance its electrochemical activity toward OER. Specifically, NiO/NiCo2O4/NF delivered a current density of 50 mA cm−2 at an overpotential of 336 mV with a Tafel slope of 93.2 mV dec−1 for the OER, which are comparable with those of commercial RuO2 (310 mV and 68.8 mV dec−1). Further, an overall water splitting system is preliminarily constructed via using a Pt net as cathode and NiO/NiCo2O4/NF as anode. The water electrolysis cell performs an operating voltage of 1.670 V at 20 mA cm−2, which outperform the Pt net||IrO2 couple assembled two-electrode electrolyzer (1.725 V at 20 mA cm−2). This study proposes an efficient route to acquire multicomponent catalysts with rich interfaces for water electrolysis.

Oxygen Evolution/Reduction Reaction Catalysts: From In Situ Monitoring and Reaction Mechanisms to Rational Design

The oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are core steps of various energy conversion and storage systems. However, their sluggish reaction kinetics, i.e., the demanding multielectron transfer processes, still render OER/ORR catalysts less efficient for practical applications. Moreover, the complexity of the catalyst-electrolyte interface makes a comprehensive understanding of the intrinsic OER/ORR mechanisms challenging. Fortunately, recent advances of in situ/operando characterization techniques have facilitated the kinetic monitoring of catalysts under reaction conditions. Here we provide selected highlights of recent in situ/operando mechanistic studies of OER/ORR catalysts with the main emphasis placed on heterogeneous systems (primarily discussing first-row transition metals which operate under basic conditions), followed by a brief outlook on molecular catalysts. Key sections in this review are focused on determination of the true active species, identification of the active sites, and monitoring of the reactive intermediates. For in-depth insights into the above factors, a short overview of the metrics for accurate characterizations of OER/ORR catalysts is provided. A combination of the obtained time-resolved reaction information and reliable activity data will then guide the rational design of new catalysts. Strategies such as optimizing the restructuring process as well as overcoming the adsorption-energy scaling relations will be discussed. Finally, pending current challenges and prospects toward the understanding and development of efficient heterogeneous catalysts and selected homogeneous catalysts are presented.

Insight into the Fe atom-FeS cluster synergistic catalysis mechanism for the oxygen evolution reaction in NiS2-based electrocatalysts.

The development of highly active oxygen evolution reaction (OER) catalysts with fast kinetics is crucial for the advancement of clean energy and fuel conversion to achieve a sustainable energy future. Recently, the synergistic effect of single-atom doping and multicomponent clusters has been demonstrated to significantly improve the catalytic activity of materials. However, such synergistic effects involving multi-electron and proton transfer processes are quite complex and many crucial mechanistic details need be well comprehended. We ingeniously propose a catalyst, (Fed-FeSc)@NiS2 (d stands for doping and c stands for clustering), with Fe and FeS acting synergistically on a NiS2 substrate. Specifically, fully dynamic monitoring of multiple active sites at the (Fed-FeSc)@NiS2 interface using metadynamics is innovatively performed. The results show that the rate determining step value at the overpotential of 1.23 V for the synergistic (Fed-FeSc)@NiS2 is 1.55 V, decreased by 6.67% and 35.29% compared to those of the independently acting single-atom doping and multi-clusters. The unique synergistic structure dramatically increases the d-band centre of the Fe site (-1.45 eV), endowing (Fed-FeSc)@NiS2 with more activity than conventional commercial Ir-C catalysts. This study provides insights into the synergistic effects of single-atom doping and multi-component clusters, leading to exploratory inspiration for the design of highly efficient OER catalysts.

Dynamics of Electron Transfers in Photosensitization Reactions of Zinc Porphyrin Derivatives

Photocatalytic systems for CO2 reduction operate via complicated multi-electron transfer (ET) processes. A complete understanding of these ET dynamics can be challenging but is key to improving the efficiency of CO2 conversion. Here, we report the ET dynamics of a series of zinc porphyrin derivatives (ZnPs) in the photosensitization reactions where sequential ET reactions of ZnPs occur with a sacrificial electron donor (SED) and then with TiO2. We employed picosecond time-resolved fluorescence spectroscopy and femtosecond transient absorption (TA) measurement to investigate the fast ET dynamics concealed in the steady-state or slow time-resolved measurements. As a result, Stern-Volmer analysis of fluorescence lifetimes evidenced that the reaction of photoexcited ZnPs with SED involves static and dynamic quenching. The global fits to the TA spectra identified much faster ET dynamics on a few nanosecond-time scales in the reactions of one-electron reduced species (ZnPs•-) with TiO2 compared to previously measured minute-scale quenching dynamics and even diffusion rates. We propose that these dynamics report the ET dynamics of ZnPs•- formed at adjacent TiO2 without involving diffusion. This study highlights the importance of ultrafast time-resolved spectroscopy for elucidating the detailed ET dynamics in photosensitization reactions.

Designing a Built-In Electric Field for Efficient Energy Electrocatalysis.

To utilize intermittent renewable energy as well as achieve the goals of peak carbon dioxide emissions and carbon neutrality, various electrocatalytic devices have been developed. However, the electrocatalytic reactions, e.g., hydrogen evolution reaction/oxygen evolution reaction in overall water splitting, polysulfide conversion in lithium-sulfur batteries, formation/decomposition of lithium peroxide in lithium-oxygen batteries, and nitrate reduction reaction to degrade sewage, suffer from sluggish kinetics caused by multielectron transfer processes. Owing to the merits of accelerated charge transport, optimized adsorption/desorption of intermediates, raised conductivity, regulation of the reaction microenvironment, as well as ease to combine with geometric characteristics, the built-in electric field (BIEF) is expected to overcome the above problems. Here, we give a Review about the very recent progress of BIEF for efficient energy electrocatalysis. First, the construction strategies and the characterization methods (qualitative and quantitative analysis) of BIEF are summarized. Then, the up-to-date overviews of BIEF engineering in electrocatalysis, with attention on the electron structure optimization and reaction microenvironment modulation, are analyzed and discussed in detail. In the end, the challenges and perspectives of BIEF engineering are proposed. This Review gives a deep understanding on the design of electrocatalysts with BIEF for next-generation energy storage and electrocatalytic devices.

(Invited) Electroreduction of Nitrogen to Ammonia at Iron Catalytic Sites Generated at Interfaces Utilizing Iron Phosphides and Heme-Type Complexes

The feasibility of performing nitrogen electroreduction reaction, or nitrogen fixation, particularly in aqueous solutions, constitutes an attractive prospect to produce ammonia under ambient, or near ambient, conditions. Development of durable, specific and reasonably efficient low-cost catalysts remains a great challenge for electrochemical science and technology. Currently, most of electrochemical approaches to N2-fixation suffers from slow kinetics due to the difficulty of achieving the appropriate adsorption and activation of dinitrogen leading to cleavage of the strong, triple N≡N bond. This symposium will feature presentations on research dealing with the fundamental and applied aspects of nitrogen reduction reactions of relevance various aspects of science and existing technologies.Transition metal phosphides are promising non-noble earth-abundant catalysts with broad electrocatalytic properties, in particular when it comes to electroreduction of such inert reactants as carbon dioxide. Herein, we report the successful electrocatalytic reduction of nitrogen (N2) using different phases of iron phosphide activated at 450 °C. For example, the FeP and Fe2P phases have been found to act as efficient catalysts for the formation of NH3 in alkaline and semineutral media. Detection of in-situ formed product has been achieved by probing the electrooxidation of NH3 to nitrogen (N2) using the additional working electrode modified with Pt nanoparticles. On mechanistic grounds, the iron (Fe0) sites seem to be electrocatalytic active during the reduction of nitrogenThe iron sites can also be generated within the porphyrin rings and related coordination structures. Their high electrocatalytic activity was historically demonstrated for the CO2-reduction. The results obtained here indicate the feasibility of horseradish peroxidase (HRP) to act as the biocatalyst, when deposited on the glassy carbon (an inert electrode substrate), capable of inducing electroduction of not only CO2 but also N2. HRP is a metalloenzyme, in which a large alpha-helical protein which binds heme as a redox cofactor. The actual electrocatalytic properties shall be attributed to the existence of heme groups, i.e. complexes of iron ions coordinated to porphyrin units. On mechanistic grounds, the nitrogen molecules seems to be chemisorbed or attracted to the heme centers during the activation step. Indeed, only “adsorbates” of N2 are catalytically reduced. In other words, the HRP-surface-attached N2 molecules, rather than the bulk reactant, are reduced at the electrocatalytic interface. The reduction reaction of nitrogen is a multielectron and multiproton transfer process suffering from high over-potentials and limited selectivity The N2 molecule with triple bond requires special means of activation through strong adsorption at the electrocatalytic interface. Obviously most of electrocatalysts will be more active toward hydrogen evolution than ammonia production. Consequently, ammonia is produced at trace levels, and the reaction efficiency is very low. On the whole, the presence of the α-helix HRP secondary structure (composed of backbone N−H groups that hydrogen-bonded to the backbone C=O groups of the amino acid network) is likely to contribute to the system’s good stability and selectivity (e.g., with respect to the competing hydrogen evolution reaction).

Halide and Oxide Double Perovskites As Promising Semiconductor Photocatalysts Candidates for Artificial Photosynthesis of Solar Fuels

Artificial photosynthesis of solar fuels is deemed as one of the Holy grails of renewable energy technology for simultaneously solving energy and environmental issues. At the present, it is one of the most involved programs in the international Mission Innovation Challenge for Accelerating the Clean Energy Revolution. Solar-driven water splitting and CO2 conversion are the main research application of artificial photosynthesis. However, these reactions are extremely challenging due to energetically uphill (G>0) and non-spontaneous multi-electron transfer processes, which are difficult to be understood by traditional knowledge of catalysis. An efficient solar energy conversion system must simultaneously deal well with light absorption, charge separation and transfer, surface redox reactions. Particularly, efficient charge separation and transfer by retarding back electron transfer, are often regarded as the key determining steps for overall solar energy conversion. To solve the high recombination rates of photogenerated electron-hole pairs and their low reduction and oxidation abilities in a single photocatalyst, heterojunction manipulation is urgently required. Two mainstream heterojunctions—type-II and Z-scheme heterojunctions have been widely acknowledged [1].Recently, lead halide perovskites (LHPs) with the chemical formula of ABX3, where A is an organic or inorganic cation (A= Cs+, MA+, FA+), B is Pb2+, and X is a halogen anion (Br-, Cl-, I-), such as CH3NH3PbI3,FAPbI3, and CsPbBr3 have been widely investigated as auspicious semiconductor photocatalysts for photocatalytic H2 production and photocatalytic CO2 reduction owing to their impressive photoelectrochemical properties, facile to synthesize, high carrier mobility, low exciton binding energy, and long carrier lifetime [2]. However, the high toxicity and notorious instability upon exposure to light, moisture, and high temperature are the major obstacles to their practical use.Therefore, developing alternative lead-free semiconductor photocatalysts with similar optoelectronic properties to the LHPs is highly needed.Inorganic halide double-perovskites and analogous oxide double-perovskites with the chemical formula of A2B'B"X6 and A2B'B"O6, respectively, are layered 3D materials, which have been considered as a novel ecofriendly visible light responsive semiconductor photocatalysts to replace the toxic lead-halide perovskite. The main feature of the halide and oxide double-perovskites is that their structures can be accommodated with different transition metal combinations on B' and B" site cations to tune their intrinsic properties such as light absorption, carrier mobilities, chemical diversity, and so on. Theoretically, an auspicious photocatalytic activity can be realized from them owing to their impressive photophysical properties. However, poor charge separation and severe charge recombination have restricted their practical photocatalytic application. Recently, several halides and oxides double perovskites have been demonstrated as visible light-responsive photocatalysts for photocatalytic CO2 reduction and photocatalytic half-reaction (oxygen and hydrogen evolution reactions) such as Cs2AgBrBr6, Cs2AgSbBr6, Sr2CoTaO6, Sr2CoWO6, etc. [3-5]. However, for oxide double perovskites even though they have shown bifunctional photocatalytic oxygen and hydrogen two half-reactions with visible light but their potential as photocatalytic CO2 reduction and one-step overall water splitting have not been achieved so far. Therefore, further improvement of the material design and synthesis by assembling heterostructure based on two eco-friendly halide and oxide double perovskites may play a key role in achieving high efficient photocatalytic performance under visible-light-irradiation. Thought is a challenging task, but holds great potential in advancing science and technology in photocatalysis. References Liao, C. Li, S.-Y. Liu, B. Fang, H. Yang, Emerging frontiers of Z-scheme photocatalytic systems, Trends in Chemistry. 4 (2022) 111–127.-C. Wang, N. Li, A.M. Idris, J. Wang, X. Du, Z. Pan, Z. Li, Surface Defect Engineering of CsPbBr3 Nanocrystals for High Efficient Photocatalytic CO2 Reduction, Solar RRL. 5 (2021) 2100154.Idris, A. M.; Liu, T.; Shah, J. H.; Zhang, X.; Ma, C.; Malik, A. S.; Jin, A. Solar RRL 2020, 4 (3), 1900456.Idris, A. M.; Liu, T.; Hussain Shah, J.; Han, H.; Li, C. ACS Sustainable Chemistry&Engineering 2020, 8 (37), 14190-14197.Wang, H. Huang, Z. Zhang, C. Wang, Y. Yang, Q. Li, D. Xu, Lead-free perovskite Cs2AgBiBr6@g-C3N4 Z-scheme system for improving CH4 production in photocatalytic CO2 reduction, Applied Catalysis B: Environmental. 282 (2021).