Molecular Beacon DNA Research Articles

Sequestration within peptide coacervates improves the fluorescence intensity, kinetics, and limits of detection of dye-based DNA biosensors

Peptide-based liquid-liquid phase separated domains, or coacervates, are a biomaterial gaining new interest due to their exciting potential in fields ranging from biosensing to drug delivery. In this study, we demonstrate that coacervates provide a simple and biocompatible medium to improve nucleic acid biosensors through the sequestration of both the biosensor and target strands within the coacervate, thereby increasing their local concentration. Using the well-established polyarginine (R9) – ATP coacervate system and an energy transfer-based DNA molecular beacon we observed three key improvements: i) a greater than 20-fold reduction of the limit of detection within coacervates when compared to control buffer solutions; ii) an increase in the kinetics, equilibrium was reached more than 4-times faster in coacervates; and iii) enhancement in the dye fluorescent quantum yields within the coacervates, resulting in greater signal-to-noise. The observed benefits translate into coacervates greatly improving bioassay functionality.

Fluorescent assay for alkaline phosphatase by integrating strand displacement amplification with DNAzyme-catalytic recycling cleavage of molecular beacons

A fluorescence sensing method for the quantification of alkaline phosphatase (ALP) was developed by integrating the strand displacement amplification with DNAzyme-catalytic recycling cleavage of molecular beacons. ALP can hydrolyze a 3′-phosphoralated primer into a 3′-hydroxy primer which can initiate the strand displacement amplification to produce the Mg2+-dependent DNAzyme. The DNAzyme can then catalyze the cleavage of the DNA molecular beacon labeled with FAM fluorophore at its 5′-end and BHQ1 quencher at its 3′-end, turning on the fluorescence of FAM fluorophore. The content of ALP in a sample can be deduced from the measured fluorescence intensity. Due to the cascading nature of its amplification strategy, the proposed method achieved sensitive and specific ALP detection in human serum samples. Its results were in good consistent with the corresponding values obtained by a commercial ALP detection kit. The limit of detection of the proposed method for ALP is about 0.015 U/L, lower than some methods recently reported in literature, demonstrating its potential for ALP detection in biomedical research and clinical diagnosis.

DNAzyme-driven tripedal DNA walker triggered hybridization chain reaction for label-free electrochemical detection of Alzheimer’s tau protein

The tau protein is considered to be a reliable molecular biomarker of Alzheimer's disease (AD). Developing sensitive and reliable techniques for tau protein detection is a vital task. In this work, we designed a label-free electrochemical aptasensor for tau protein quantification based on Mg2+-DNAzyme (MNAzyme)-driven tripedal DNA walker. With the assistance of MNAzyme, free-running tripedal DNA walkers could rapidly and continually scissor DNA molecular beacon (MBs), and the fragment as a primer initiated the hybridization chain reaction (HCR) process generating a huge amount of long DNA strand containing many adenines. Following that, the strand with long-repeated adenines (HCR product) may absorb numerous AgNPs on the surface of electrode for electrochemical stripping analysis. Benefiting from MNAzyme-tripedal DNA walker and HCR triple signal amplification, we achieved a superior detection limit of 0.43 fM as well as a broad linear range of 1 fM to 0.1 nM. After being applied to tau protein detection in human serum samples, this novel electrochemical aptasensor demonstrated a high degree of anti-interference, and reproducibility, indicating its great potential for bioanalysis in complex biological environments.

DNA Nanostructure-Guided Plasmon Coupling Architectures

DNA Nanostructure-Guided Plasmon Coupling Architectures

Microfluidic One-Pot Digital Droplet FISH Using LNA/DNA Molecular Beacons for Bacteria Detection and Absolute Quantification.

We demonstrate detection and quantification of bacterial load with a novel microfluidic one-pot wash-free fluorescence in situ hybridization (FISH) assay in droplets. The method offers minimal manual workload by only requiring mixing of the sample with reagents and loading it into a microfluidic cartridge. By centrifugal microfluidic step emulsification, our method partitioned the sample into 210 pL (73 µm in diameter) droplets for bacterial encapsulation followed by in situ permeabilization, hybridization, and signal detection. Employing locked nucleic acid (LNA)/DNA molecular beacons (LNA/DNA MBs) and NaCl-urea based hybridization buffer, the assay was characterized with Escherichia coli, Klebsiella pneumonia, and Proteus mirabilis. The assay performed with single-cell sensitivity, a 4-log dynamic range from a lower limit of quantification (LLOQ) at ~3 × 103 bacteria/mL to an upper limit of quantification (ULOQ) at ~3 × 107 bacteria/mL, anda linearity R2 = 0.976. The total time-to-results for detection and quantification was around 1.5 hours.

Highly multiplex PCR assays by coupling the 5′-flap endonuclease activity of Taq DNA polymerase and molecular beacon reporters

Real-time PCR is the most utilized nucleic acid testing tool in clinical settings. However, the number of targets detectable per reaction are restricted by current modes. Here, we describe a single-step, multiplex approach capable of detecting dozens of targets per reaction in a real-time PCR thermal cycler. The approach, termed MeltArray, utilizes the 5'-flap endonuclease activity of Taq DNA polymerase to cleave a mediator probe into a mediator primer that can bind to a molecular beacon reporter, which allows for the extension of multiple mediator primers to produce a series of fluorescent hybrids of different melting temperatures unique to each target. Using multiple molecular beacon reporters labeled with different fluorophores, the overall number of targets is equal to the number of the reporters multiplied by that of mediator primers per reporter. The use of MeltArray was explored in various scenarios, including in a 20-plex assay that detects human Y chromosome microdeletions, a 62-plex assay that determines Escherichia coli serovars, a 24-plex assay that simultaneously identifies and quantitates respiratory pathogens, and a minisequencing assay that identifies KRAS mutations, and all of these different assays were validated with clinical samples. MeltArray approach should find widespread use in clinical settings owing to its combined merits of multiplicity, versatility, simplicity, and accessibility.

Current Simultaneous Discrimination of Mismatched MicroRNAs Using Base-Flipping within the α-Hemolysin Latch.

The simultaneous discrimination of let-7 microRNAs (miRNAs) would greatly facilitate the early diagnosis and prognosis monitoring of diseases. In this work, a molecular beacon DNA probe was designed to be able to flip out its mismatched cytosine base within the α-hemolysin (α-HL) latch and generate completely separated blocking currents to identify the single-base difference. As a result, the characteristic blocking current of fully matched MB/let-7a and single-base mismatched MB/let-7f was 84.30 ± 0.92 and 87.05 ± 0.86% (confidence level P 95%), respectively. Let-7 miRNA family let-7a and let-7f were completely simultaneously discriminated, which could be attributed to the following strengths. (1) The statistic distribution of blocking current is extremely concentrated with a small relative standard deviation (RSD) of less than 1% and a narrow distribution range. (2) Complete separation is achieved with a high separation resolution of 1.54. (3) The cytosine base flipping out within the α-HL latch provides a universal labeling-free strategy to simultaneously discriminate the single-base mismatch. Overall, the target let-7f sequences were detected with a linear range from 0.001 to 10 pM in human serum samples containing 200 nM let-7a. Great potential has been demonstrated for precise detection, early diagnosis, and prognosis monitoring of diseases related to single-base difference.

Functionalized ZIF‐90 for Gene‐mediated Chemotherapy to Ameliorate Multidrug Resistance in Breast Cancer Therapy

AbstractBreast cancer, the most common cancer, is a threat to women's health. A great challenge for breast cancer is the multidrug resistance (MDR) problem. P‐glycoprotein (P‐gp) is one of main reasons to induce MDR in the therapy of breast cancer. A novel nanosystem based on ZIF‐90 was developed for alleviating MDR and to improve the therapeutic efficacy. In this investigation, ZIF‐90 was used as a carrier to deliver two kinds of DNA molecular beacons (MBs) and Doxorubicin (Dox). The loop sequences of two kinds of MBs were designed to specifically hybridize with the mRNAs related to P‐gp (MDR1 gene and ETS1 gene, respectively), thereby directly inhibiting the expression of downstream proteins P‐gp. The results of confocal fluorescence imaging and qRT‐PCR analysis indicated that MB and Dox were delivered into cells and the mRNAs related to P‐gp were silenced. The MTT assay showed that the IC50 of nanosystem to the drug‐resistant breast cancer cells (34.78 μg/mL) was much lower than the IC50 of Dox to the same cells (152.7 μg/mL). These results distinctly confirmed that the problem of MDR has been ameliorated by our designed nanosystem. It is our hope that this investigation may provide a new treatment strategy for enhancing the therapeutic efficacy of chemotherapy for breast cancer.

Metal-organic frameworks-assisted nonenzymatic cascade amplification multiplexed strategy for sensing acute myocardial infarction related microRNAs

Amplification strategies for multiple microRNAs (miRNAs) detection are pivotal for acute myocardial infarction (AMI). Herein, we rationally developed a metal-organic frameworks-assisted nonenzymatic cascade amplification strategy for simultaneous quantification of three AMI-related miRNAs (miR-21, miR-499 and miR-133a). The fluorescence of the elaborately designed DNA molecular beacons with the respective modification of FAM, TAMRA and Cy5 in the terminal was quenched by a metal-organic framework named Fe-MIL-88. When targets miRNA appeared, they hybridized with the corresponding DNA molecular beacons, and the catalyzed hairpin assembly (CHA) reaction would be triggered, producing “Y” shaped three-branched duplex nanostructure with the targets released, and initiating subsequent another cycle. The “Y” shaped nanostructures could not be adsorbed onto the surface of Fe-MIL-88 due to the weaker affinity between Fe-MIL-88 and “Y” shaped nanostructures. Therefore, the fluorescence of “Y” shaped nanostructures could not be quenched by Fe-MIL-88. In this way, three AMI-related miRNAs were simultaneously detected in the respective ranges of 0.05–30 nM, 0.08–30 nM and 0.1–20 nM with respective limits of detection down to 13, 25 and 40 pM. Furthermore, the method was successfully employed to determine three AMI-related miRNAs in human serum. The strategy offered great opportunity for ultrasensitive detecting multiple AMI-related miRNAs and substantially improving the accuracy of clinical early AMI diagnosis.

Molecular Beacon DNA Probes with Fluorescein Bifluorophore

—An azido-derivative of a fluorescein bifluorophore was obtained and used for the synthesis of “molecular beacon”-type oligonucleotide fluorogenic probes for RT-PCR. Eight probe variants were synthesized based on an optimized sequence: with one or two quencher residues at the 3'-end, with a single or bifluorophore fluorescein label attached to 5'-end using modifying phosphoramidites (short linker) or “click reaction” (long linker). Comparison of probes in RT-PCR showed that probes with a doubled quencher (single fluorescein on a short linker) and doubled dye on a short linker (single dye) are somewhat superior in sensitivity to a standard probe (single quencher, single dye on a short linker) by the value of ΔCt = 1–2.

Activity assay and intracellular imaging of APE1 assisted with tetrahedral DNA nanostructure modified-dnazyme and molecular beacon

Human apurinic/apyrimidinic endonuclease 1 (APE1) is an emerging target for sensitizing tumor cells to radiation and chemotherapy due to its critical function in DNA repair and reduction-oxidation regulation. Thus, accurate detection and intracellular imaging of APE1 hold great promise for drug screening, cancer diagnosis and prognosis evaluation. Here, a DNAzyme modified tetrahedral DNA nanostructure (DZ-TDN) and molecular beacon (MB) incorporated biosensing system was developed to reliably monitor intracellular APE1 activity. DZ-TDN was self-assembled from four single-stranded DNAs, one of which contained an extrude DNAzyme sequence on the 5′-end. At normal status, DNAzyme activity was plugged by performing a duplex with a blocker strand containing an AP site. The digestion of APE1 on this site can restore DNAzyme activity, which consequently trigger MB cleavage recycle to amplify detection signal. The results indicated that the proposed fluorescence method showed a linear response ranged for APE1 from 0.01 to 1 U mL−1 with a limit of detection (LOD) of 0.01 U mL−1 (S/N = 3). Moreover, the strategy was successfully used for effectors screening and intracellular imaging of APE1 with high reliability.

Allosteric DNA molecular beacons: Using a novel mechanism to develop universal biosensor arrays to fully discriminate DNA/RNA analogues

With a unique stem-loop hairpin structure, DNA molecular beacons have proven effective in the accurate discrimination of nucleic acid sequences with small changes. However, there are still many problems in current molecular beacons such as stringent assay conditions, insufficient specificity, non-universality and difficulty in multi-targets recognition. One universal type of allosteric DNA molecular beacons was developed in this work by separating the recognition element and signal reporter. The response process was demonstrated by real-time fluorescence simulations and native gel electrophoresis. Used as universal elements in biosensor arrays, the allosteric DNA molecular beacons can fully discriminate various muted DNA/RNA targets as separate clusters without any overlap. The new allosteric DNA molecular beacons have many advantages over conventional ones, typically used for biosensor arrays, and expand the application prospect of molecular beacons for complex bioassay tasks.

Electrokinetic mixing in electrode-embedded multiwell plates to improve the diffusion limited kinetics of biosensing platforms

Rapid and accurate biosensing with low concentrations of the analytes is usually challenged by the diffusion limited reaction kinetics. Thus, as a remedy, long incubation times or excess amounts of the reagents are employed to ensure the reactions to go to completion. Therefore, mixing becomes both a serious problem and necessity to overcome that diffusion limitation and homogenize the samples, especially for the biochemical reactions that take place in multiwell plates. Because the current mixing platforms such as shakers/vortexers, sonicators, magnetic stirrers and acoustic mixers have disadvantages including, but not limited to, being invasive/harfmul to the samples, causing the samples to splash out or stick to the walls of the wells and allowing foreign compartments to enter the solutions in the wells. Here we propose a noninvasive and safer (considering the risk of sample loss) technology that provides electrokinetic-mixing (EKM) of the reagents placed in electrode-embedded multiwell plates where the incubation times, or in other words, the time required for the desired molecules to meet in stationary solutions, can be reduced substantially. In order to demonstrate the power of this innovation, in this specific case, a simple Förster resonance energy transfer (FRET) based quenching bioplatform was adopted, where a molecular beacon DNA (MB) modified with sulfhydryl (–SH) and fluorescein (FITC) dye at opposite terminals was incubated with 10 nm sized gold nanoparticles (AuNPs) in the wells of an electrode-embedded multiwell plate, in which a printed circuit board (PCB) was attached at the bottom to control the liquid flows by EKM. When the MB binds to AuNPs through thiolate chemistry in the solution, FITC dye comes in close proximity to the AuNP surface and the emission is quenched via FRET principle. Thus, this quenching percentage over time was our comparison parameter for the mixing and no mixing cases to demonstrate the impact of mixing on the quenching kinetics. This reaction was conducted with different concentrations of AuNPs to observe the impact of mixing on MB quenching kinetics when the concentrations of the AuNPs were increased. Total quenching efficiency could go up to 90% in the presence of the AuNPs and it took about 60 min to reach stability. When the EKM was involved, fluorescence quenching time for the MBs could be reduced by up to 4.1 times. Thus, it was demonstrated that this technology may improve the kinetics of the diffusion limited biological reactions take place in multiwell plates substantially so that it may be adopted in various different sensing platforms for rapid measurements.

Intracellular MicroRNA Imaging with MoS2-Supported Nonenzymatic Catassembly of DNA Hairpins.

Amplification strategies for low-level microRNA detection in living cells are pivotal for gene diagnosis and many cellular bioprocesses. In this work, we develop an amplification strategy for microRNA-21 (miRNA-21) imaging in living cells with MoS2-supported catassembly of DNA hairpins. The MoS2 nanosheet with low cytotoxicity serves as the nanocarrier and excellent fluorescence quencher, which can transfer fluorescent metastable hairpin DNA into the cells easily in a nondestructive manner and significantly reduce background signals. The three-branched catalyzed hairpin assembly (TB-CHA) probes contain three types of designed DNA molecular beacons with the modification of Cy3 in the terminal. In the presence of miRNA-21, the catalyzed hairpin assembly (CHA) reaction would be triggered and a "Y"-shaped three-branched duplex nanostructure would be formed, which would release from the surface of the MoS2 nanosheet due to the reduced affinity between the DNA duplex and MoS2 nanosheet. The multisite fluorescence modification and the circular reaction of TB-CHA probes allowed a significant fluorescence recovery in a live-cell microenvironment. The ultrasensitive detection of miRNA-21 is achieved with a detection limit of 75.6 aM, which is ∼5 orders of magnitude lower than that of a simple strand displacement-based strategy (detection limit: 8.5 pM). This method offers great opportunities for the ultrasensitive live-cell detection of miRNAs and helps in gaining a deeper understanding of the physiological functions of miRNAs in cancer research and life processes.

Novel homo Yin-Yang probes improve sensitivity in RT-qPCR detection of low copy HIV RNA

Nucleic acids labeled with a fluorophore/quencher pair are widely used as probes in biomedical research and molecular diagnostics. Here we synthesized novel DNA molecular beacons double labeled with the identical dyes (R6G, ROX and Cy5) at 5′- and 3′-end and studied their photo physical properties. We demonstrated that fluorescence quenching by formation of the homo dimer exciton in such molecular beacons allows using them in homogeneous assays. Further, we developed and evaluated homo Yin-Yang DNA probes labeled with identical dyes and used them for detection of low copy HIV RNA by RT-qPCR. They demonstrated improved sensitivity (LLQ: 10 vs 30 copies mL-1) in comparison to commercially available Abbott RealTime HIV-1 kit based on VIC-BHQ dyes both for model mixtures (naive human plasma with added deactivated HIV-1 virus) and for preliminarily confirmed 36 clinical samples (4 vs 1 positive ones for low-copy samples).

Electrochemical Detection of Bacillus anthracis Protective Antigen Gene Using DNA Biosensor Based on Stem−Loop Probe

The presented study is focused on the development of repetitive, fast and versatile “on-off” signaling electrochemical genosensor for detection of pagA gene of Bacillus anthracis. Such a sensor will be further used in the portable devices dedicated to molecular diagnostic. The DNA molecular beacon probe was immobilized onto gold electrodes in its folded state through the alkanethiol linker at the 5’-end, while the 3’-end was labeled with methylene blue redox molecule. Initial optimization was conducted for HPLC purified cDNA. Nonetheless application of such prepared biosensor for unpurified PCR product required further investigations. As the sensor response was significantly dependent on the stem-loop architecture, the three different hairpin probes were analyzed. The detected sequence was interior to amplicon, identical as in case of cDNA. The developed “on-off” genosensor allows for detection, in 5 minute, the pagA gene sequence at the level of 5.7 nM with 22.9–86.0 nM linear detection range also in the great excess of other DNA presented in the sample. Both LOD and linear range were significantly improved in case of longer assay time. The biosensor proved its applicability also in detection of pagA gene of Bacillus anthracis in PCR samples amplified with reduced number of cycles.

Amplified Detection of the Aptamer-Vanillin Complex with the Use of Bsm DNA Polymerase.

The electrochemical detection of interactions between aptamers and low-molecular-weight targets often lacks sensitivity. Signal amplification improves the detection of the aptamer-analyte complex; Bsm DNA polymerase was used to amplify the signal from the interaction of vanillin and its aptamer named Van_74 on an ion-sensitive field-effect transistor (ISFET)-based biosensor. The aptamer was immobilized on the ISFET sensitive surface. A short DNA probe was hybridized with the aptamer and dissociated from it upon vanillin addition. A free probe interacted with a special DNA molecular beacon initiated the Bsm DNA polymerase reaction that was detected by ISFET. A buffer solution suitable for both aptamer action and Bsm DNA polymerase activity was determined. The ISFET was shown to detect the Bsm DNA polymerase reaction under the selected conditions. Vanillin at different concentrations (1 × 10−6–1 × 10−8 M) was detected using the biosensor with signal amplification. The developed detection system allowed for the determination of vanillin, starting at a 10−8 M concentration. Application of the Bsm DNA polymerase resulted in a 15.5 times lower LoD when compared to the biosensor without signal amplification (10.1007/s00604-017-2586-4).

A digital microfluidic system for loop-mediated isothermal amplification and sequence specific pathogen detection

A digital microfluidic (DMF) system has been developed for loop-mediated isothermal amplification (LAMP)-based pathogen nucleic acid detection using specific low melting temperature (Tm) Molecular Beacon DNA probes. A positive-temperature-coefficient heater with a temperature sensor for real-time thermal regulation was integrated into the control unit, which generated actuation signals for droplet manipulation. To enhance the specificity of the LAMP reaction, low-Tm Molecular Beacon probes were designed within the single-stranded loop structures on the LAMP reaction products. In the experiments, only 1 μL of LAMP reaction samples containing purified Trypanosoma brucei DNA were required, which represented over a 10x reduction of reagent consumption when comparing with the conventional off-chip LAMP. On-chip LAMP for unknown sample detection could be accomplished in 40 min with a detection limit of 10 copies/reaction. Also, we accomplished an on-chip melting curve analysis of the Molecular Beacon probe from 30 to 75 °C within 5 min, which was 3x faster than using a commercial qPCR machine. Discrimination of non-specific amplification and lower risk of aerosol contamination for on-chip LAMP also highlight the potential utilization of this system in clinical applications. The entire platform is open for further integration with sample preparation and fluorescence detection towards a total-micro-analysis system.

Combining Protein and miRNA Quantification for Bladder Cancer Analysis.

We combine the telomerase extension reaction and microRNA (miRNA)-induced rolling circle amplification, followed by graphene oxide (GO) and nicking enzyme-assisted signal amplification as a method to analyze telomerase and miRNA-21 in urine samples with the following merits. First, it is a binary assay and can simultaneously output double signals that correspond to the quantities of telomerase and miRNA, respectively. Second, telomerase activity is enhanced by using a DNA molecular beacon probe to inhibit the formation of G-quadruplex. Third, background noise is decreased significantly via introduction of GO. Fourth, performance tests on about 258 urine samples demonstrate that this binary assay can distinguish between urine from bladder cancer patients, those with cystitis, and normal individuals. Finally, this strategy also shows great potential in distinguishing between muscle-invasive bladder cancers and non-muscle-invasive bladder cancers. The proposed strategy will greatly contribute to clinical decision-making and individualized treatments.

The Y4-RNA fragment, a potential diagnostic marker, exists in saliva.

The 94-nt full-length Y4-RNA is thought to have roles in the initiation of DNA replication and RNA quality control. Although its 31/32-nt fragment also exists abundantly in plasma, little is known about its physiological role. Since the 31/32-nt Y4-RNA fragment in sera is reported to be more abundant in patients with coronary artery disease than healthy persons, the fragment may have a potential for a diagnostic and/or prognostic biomarker for some diseases regardless of its functionality. As a step toward further investigation of its potential utility, we examined if the 31/32-nt Y4-RNA fragment also exists in saliva that can be obtained noninvasively, and showed that, in addition to the 31/32-nt fragment, 14- and 11-nt Y4-RNA fragments are present in all saliva RNA samples from four healthy persons. We established a PCR method to accurately quantitate the amount of the 31/32-nt Y4-RNA fragment, and estimated its amount in saliva of healthy persons to be 0.06 ± 0.04 fmol per nanogram of saliva RNA. We also tried to develop an easier quantitation method using a DNA molecular beacon.