Mixed Cellulose Ester Membrane Research Articles

Synthetic membrane selection for in vitro release testing (IVRT): A case study of topical mometasone furoate semi-solid dosage forms

In vitro release testing (IVRT) is extensively used to develop the formulation of topical semi-solid products, to evaluate the quality and consistency of the product after scale-up and post-approval changes, and more recently to aid the evaluation of topical generic products’ equivalency. The selection of synthetic membrane is one of the most critical parameters of the method development part of IVRT. It is well known that the membrane features namely its polymer matrices, porosity, pore size, thickness can have a substantial effect on the IVRT data. However, there is no detailed information available in the literature regarding the membrane selection for different types of topical dosage forms. Therefore, we aimed to investigate whether difference topical semi-solid dosage forms of the same drug molecule would cause to variation in the membrane selection. Within this framework, rheological behaviour of commercially available three different types of topical semi-solid dosage forms (ointment, cream, and lotion) of mometasone furoate (0.1%) were primarily characterized. Then, the membrane inertness test was conducted using a series of synthetic hydrophilic membranes (regenerated cellulose, cellulose acetate, cellulose nitrate, mixed cellulose ester membranes) and hydrophobic membranes (polyether sulfone, polypropylene, polytetrafluoroethylene membranes) after identifying of an appropriate receptor medium that ensures sink condition for mometasone furoate. Lastly, IVRT studies from the topical semi-solid products were performed utilizing Franz-type diffusion cells. The membrane inertness and in vitro release data demonstrated that the cellulose acetate membrane showed superior diffusion properties in general while the other synthetic membranes exhibited varying outcomes for different semi-solid dosage forms of mometasone furoate. Overall, the results indicated that the release rate and the cumulative drug released amount of drug after 6 h through the different synthetic membranes might vary depending on the semi-solid dosage form. In order to select the synthetic membrane for IVRT, it should also be considered potential interactions between the polymer matrices and the chemical structure of drug molecule as well as formulation components prior to conducting membrane inertness test and IVRT studies.

Clarification of apple juice using cold plasma treated mixed cellulose esters membrane: flux modeling, membrane fouling, and juice physicochemical properties evaluation

This study aimed to clarify apple juice using unmodified and low-pressure cold plasma (gas: air, power: 10 W, and exposure time: 180 s) surface-modified mixed cellulose esters (MCE) microfiltration membranes. The effect of feed pressure (20, 40, and 60 kPa), feed flow rate (10, 15, and 20 mL/s), and feed temperature (27 and 40°C) on the permeate flux was evaluated using response surface methodology (RSM). The binary interaction of feed pressure and temperature and the second-order (non-linear) interaction of feed pressure and flow rate had a significant effect on the permeate flux (P<0.05). Generally, the process at 60 kPa, 15 mL/s, and 40 °C resulted in the maximum permeate flux. The cold plasma surface modification of the MCE membrane increased the permeate flux by about 45% at the optimum process conditions. Evaluation of membrane fouling showed that the cake formation was the predominant membrane fouling mechanism during both membrane processing. The physicochemical properties evaluation revealed that the surface-modified membrane produced clarified apple juice with antioxidant activity, reducing sugars, total sugars, phenolic, and vitamin C contents about 18.87%, 12.9%, 15.49%, 24.53%, and 45.15% more than clarified apple juice produced with unmodified MCE membrane, respectively.

Surface treatment optimization of mixed cellulose ester membrane by cold plasma treatment to improve apple juice clarification

This study aimed to determine the optimal conditions for the surface modification of mixed cellulose ester (MCE) microfiltration membrane by cold plasma (CP) for apple juice clarification. Response surface method using central cubic design (CCD) was employed for the optimization of the membrane surface modification process. Plasma gas type (oxygen, carbon dioxide, and air), power (10, 15, and 20 W), and exposure time (120, 180, and 240 s) were used as the factors for cold plasma surface modification. The results revealed the surface modification of the MCE membrane using air as plasma gas with plasma power and exposure time equal to 10 W and 180 s resulted in the maximum permeate flux in apple juice clarification. The results of scanning electron microscope, and atomic force microscope confirm the effect of CP treatment on the membrane surface roughness. Fourier transform infrared spectroscopy showed the incorporation of the hydroxyl group into the membrane surface due to CP treatment which affected the surface contact angle and hydrophilicity. The CP treatment of the membrane significantly affects the membrane resistances. Also, the surface modification of the MCE membrane using the CP treatment process in optimal conditions is an effective method for clarifying apple juice.

Band gap engineering of g-C3N4/CuS and its application in Solar Still

Interfacial solar steam generation is considered as economical and more effective implementation of Solar steam generation (SSG) where solar energy is concentrated at the liquid surface via the utilization of heat localization materials (HLM). Herein we report the fabrication of an HLM constituted of a nanocomposite absorber of graphitic carbon nitride (g-C3N4) and covellite copper sulfide (CuS) supported on a mixed cellulose ester membrane, with a substrate of air laid paper-wrapped polystyrene foam. This structure allowed for strong broad-spectrum absorbance, increased hydrophilic character and minimal thermal losses. The HLM system absorbed 98% of the material and had an evaporation rate of 2.58 kgs per square meter per hour. This is twice the evaporation rate of water tested under the same conditions. Moreover, as fabricated HLM was also incorporated in a solar still in order to assess its practical performance in solar distillation. Initial studies proved that HLM modified solar still was more effective than conventional solar stills.

A fast and effective way to measure the inner pore size distributions of wetted cotton fibers and their pretreatment performance using time-domain nuclear magnetic resonance

This study reports the findings from using time-domain nuclear magnetic resonance (TD-NMR) to analyze the pore structures of cotton fibers. Cotton fibers, which swell and soften in water, present challenges for conventional pore measurement techniques. TD-NMR overcomes these by measuring the transverse relaxation time (T2) of water protons within the fibers, indicative of internal pore sizes. We established a T2-to-pore size conversion equation using mixed cellulose ester membranes. This enabled differentiation between strongly bound, loosely bound, and free water within the fibers, and detailed the water distribution. A method for measuring the pore size distribution of wet cotton fiber was developed using TD-NMR. We then examined how various pretreatments affect the fibers' internal pores by comparing their pore size distribution and porosity. Specifically, caustic mercerization primarily enlarges the porosity and size of larger pores, while liquid ammonia treatment increases porosity but reduces the size of smaller pores. This research confirms TD-NMR's utility in assessing cotton fabrics' wet processing performance.

Plasmonic group 4 transition metal carbide interfaces for solar‐driven desalination

AbstractTo combat the dwindling supply of freshwater, solar‐driven desalination using plasmonic nanomaterials has emerged as a promising and renewable solution. Refractory plasmonic carbide nanomaterials are exciting candidates that are inexpensive and chemically robust but have not been widely explored. Herein, plasmonic carbide interfaces made of TiC, ZrC, and HfC nanoparticle aggregates loaded onto to a mixed cellulose ester (MCE) membrane were explored to gain insight into their solar‐vapor generation and desalination potential. Desalination using Atlantic Ocean water under 1 sun intensity yielded rates of 1.26 ± 0.01, 1.18 ± 0.02, and 1.40 ± 0.01 kg m−2 h−1, with efficiencies of 86%, 80%, and 96% for TiC, ZrC, and HfC, respectively. Carbide interfaces showed good stability and effectively removed heavy metal ions and salt from solutions with concentrations up to 35%. PVA hydrogel based TMC evaporators afforded rates of 3.31 ± 0.03 and 3.22 ± 0.03 kg m−2 h−1 for TiC and ZrC, respectively. The HfC‐PVA interface afforded a high solar desalination rate of 3.69 ± 0.04 kg m−2 h−1, corresponding to an efficiency of 97% under 1‐sun illumination. The hydrogel evaporators also retained their strong salt rejection action over time.

Quorum Quenching Nanofibers for Anti-Biofouling Applications

Biofilms, complex microbial communities, adept at forming on diverse surfaces within environments, such as membrane technologies, ship hulls, medical devices, and clinical infections, pose persistent challenges. While various biofilm prevention methods, including antimicrobial coatings, physical barriers, and bacteriophage utilization, have been devised for engineered systems, their efficacy fluctuates based on application type and microbial species. Consequently, there remains a pressing need for the development of highly targeted and efficient biofilm control strategies tailored to specific applications remains a pressing need. In our investigation, we disrupt microbial cell-to-cell communication in Pseudomonas aeruginosa through the application of anti-quorum sensing (anti-QS) furanone C-30 molecules. The incorporation of these molecules onto electrospun surfaces yielded substantial reductions of 69% in petri dish assays and 58% on mixed cellulose ester (MCE) membranes in a dead-end nanofiltration system, showcasing the potent anti-biofouling impact. Notably, the functionalization of MCE surfaces with anti-QS molecules resulted in a remarkable 16.7% improvement in filtration output. These findings underscore the potential of this targeted approach to mitigate biofilm formation, offering a technical foundation for advancing tailored strategies in the ongoing pursuit of effective and application-specific biofilm control measures.

Constructing graphene oxide/Au nanoparticle cellulose membranes for SERS detection of mixed pesticide residues in edible chrysanthemum.

Edible chrysanthemum is widely cultivated and used as an important ingredient of medicine, tea and multifunctional food. During the planting of chrysanthemum, pesticides are extensively used for preventing plant diseases and insect pests. To ensure the food safety of edible chrysanthemum, rapid detection methods are urgently needed for on-site inspection. In this study, a graphene oxide/Au nanoparticle (GO/Au NP) cellulose substrate was prepared through layer-by-layer assembly of GO and Au NPs on a mixed cellulose ester membrane. Surface-enhanced Raman spectroscopy (SERS) detection of four types of organophosphorus and organosulfur pesticides was achieved by filtering the extracting solution through the substrate and analysing SERS spectra. Qualitative and semi-quantitative detection of fenthion, phoxim, isocarbophos and thiram was accomplished with the detection limits of 38.01, 8.13, 48.97 and 8.74 ng mL-1, respectively. A spiking experiment further demonstrated the feasibility of this method for rapid and on-site detection of mixed pesticides in chrysanthemum. This study provides a new approach for rapid detection of multiple hazardous substances in flowering and herbal plants.

Impression cytology of ocular surface in xeroderma pigmentosum.

To describe cellular alterations detected by impression cytology of the ocular surface in patients with xeroderma pigmentosum. The secondary objective was to assess the reliability of impression cytology in diagnosing ocular surface squamous neoplasia. Patients with xeroderma pigmentosum underwent a single-day complete ophthalmological examination and impression cytology for ocular surface evaluation using 13 mm diameter mixed cellulose esters membrane filters and combined staining with Periodic Acid Schiff, Hematoxylin and Eosin, and Papanicolaou stains followed by microscopic analysis. The cytological findings were correlated with the clinical diagnosis. The impression cytology findings at baseline and one-year follow-up were correlated with the clinical course (no tumor, treated tumor, residual tumor recurrent tumor, new tumor). Of the 42 patients examined, impression cytology was performed in 62 eyes of 34 participants (65% females). The mean age of patients was 29.6 ± 17 years (range 7-62). Fifteen eyes had a clinical diagnosis of ocular surface squamous neoplasia. Impression cytology showed goblet cells (47, 75%), inflammatory cells (12, 19%), keratinization (5, 8%), and squamous metaplasia (30, 48%). Impression cytology was positive for atypical cells in 18 patients (12 with and 6 without ocular surface squamous neoplasia). The sensitivity, specificity, positive predictive value, and negative predictive value of impression cytology (at baseline) for diagnosis of ocular surface squamous neoplasia were 80%, 87%, 67%, and 93%, respectively, using clinical diagnosis of ocular surface squamous neoplasia as the reference standard. Impression cytology has a moderate positive predictive value for the diagnosis of ocular surface squamous neoplasia in patients with xeroderma pigmentosum. However, the lack of detection of atypical cells on impression cytology has a high negative predictive value for ocular surface squamous neoplasia. Integration of impression cytology in the long-term management of high-risk patients, such as patients with xeroderma pigmentosum, can avoid unnecessary diagnostic biopsies.

Selective filtration of dye by tannic acid‐molybdenum disulfide composite nanofiltration membrane

AbstractDye‐selective nanofiltration membranes have great potential for chemical dye separation and purification as well as dye wastewater treatment. Two‐dimensional materials such as molybdenum disulfide (MoS2) with excellent physical and chemical properties are ideal nanofiltration membrane materials. MoS2 with few layers is used in combination with polyphenols to prepare highly selective filtration nanofiltration membranes for cationic dyes. The tannic acid (TA)‐MoS2 composite material is constructed on the surface of a micro‐porous Mixed Cellulose Ester membrane by a vacuum filtration method, and the nanofiltration membrane exhibits good flexibility and excellent film‐forming properties. The maximum filtration efficiency of TAMoS2 nanocomposite film for R6G can reach 80%, while for EY and MO, it is only 9.6% and 6.1% respectively. Filtration studies on mixtures of two different types of dyes show that the composite nanofiltration membrane has excellent separation performance. The separation characteristics and mechanism of the composite nanofilm on dyes are carefully studied, showing good selectivity for cationic dyes, which can be ascribed to the synergistic effect of non‐covalent interactions and steric hindrance. This work paves the way for the use of eco‐friendly membranes for water and wastewater treatment and provides an environmentally friendly solution for various applications.

Comparison of concentration and extraction workflows for qPCR quantification of intI1 and vanA in untreated wastewater

Quantitative polymerase chain reaction (qPCR) measurement of antibiotic resistance genes (ARGs) in untreated municipal wastewater may prove useful in combating the antimicrobial resistance crisis. However, harmonizing and optimizing qPCR-based workflows is essential to facilitate comparisons across studies, and includes achieving highly-effective ARG capture through efficient concentration and extraction procedures. In the current study, combinations of sample volume, membrane types and DNA extraction kits within filtration and centrifugation-based workflows were used to quantify 16S ribosomal RNA (16S rRNA), class 1 integron-integrase gene (intI1) and an ARG encoding resistance to vancomycin (vanA) in untreated wastewater sampled from three wastewater treatment plants (WWTPs). Highly abundant 16S rRNA and intI1 were detected in 100 % of samples from all three WWTPs using both 2 and 20 mL sample volumes, while lower prevalence vanA was only detected when using the 20 mL volume. When filtering 2 mL of wastewater, workflows with 0.20-/0.40-μm polycarbonate (PC) membranes generally yielded greater concentrations of the three targets than workflows with 0.22-/0.45-μm mixed cellulose ester (MCE) membranes. The improved performance was diminished when the sample volume was increased to 20 mL. Consistently greater concentrations of 16S rRNA, intI1 and vanA were yielded by filtration-based workflows using PC membranes combined with a DNeasy PowerWater (DPW) Kit, regardless of the sample volume used, and centrifugation-based workflows with DNeasy Blood & Tissue Kit for 2-mL wastewater extractions. Within the filtration-based workflows, the DPW kit yielded more detection and quantifiable results for less abundant vanA than the DNeasy PowerSoil Pro Kit and FastDNA™ SPIN Kit for Soil. These findings indicate that the performance of qPCR-based workflows for surveillance of ARGs in wastewater varies across targets, sample volumes, concentration methods and extraction kits. Workflows must be carefully considered and validated considering the target ARGs to be monitored.

Health risk assessment of exposure to various vapors and fumes in a factory of automobile manufacturing

This study aimed to comprehensively evaluate the health risk of exposure to various vapors and fumes in a factory of automobile manufacturing. This study was performed in 2021 on 115 workers. Vapors and fumes were gathered by the adsorbent tubes of activated charcoal and mixed cellulose esters (MCE) membrane filter, respectively. The flow rate for vapors and fumes were between 0.05 and 0.20 L per min and 1 to 4 L per min, respectively. After preparing, samples were analyzed. To assess the non-cancer and cancer risk of the pollutants, the method proposed environmental protection agency (EPA) was applied. The total concentration of copper (1.031 ppm), manganese (0.114), and 2-butoxyethanol (91.767 ppm) were found to be higher than The threshold limit values (TLVs). The values of non-cancer risk (HQ) due to exposure to vapors of benzene (6.583), toluene (1.396), ethyl benzene (1.212), xylene (31.148), 2-butoxyethanol (89.302), 2-propanol (4.695), 1,2,3-trimethylbenzene (1.923), copper (2.336), manganese (715.82), aluminum (3.772), and chromium (107.066) were higher than the acceptable limit. Moreover, the estimated LCR for benzene (2.15 × 10−4), ethyl benzene (3.97 × 10−4), vinyl chloride (1.25 × 10−4), and chromium (2.11 × 10−2) were higher than the threshold risk level set by EPA. It is emphasized that preventive measures are performed.

Microbial communities in aerosol generated from cyanobacterial bloom-affected freshwater bodies: an exploratory study in Nakdong River, South Korea.

Toxic blooms of cyanobacteria, which can produce cyanotoxins, are prevalent in freshwater, especially in South Korea. Exposure to cyanotoxins via ingestion, inhalation, and dermal contact may cause severe diseases. Particularly, toxic cyanobacteria and their cyanotoxins can be aerosolized by a bubble-bursting process associated with a wind-driven wave mechanism. A fundamental question remains regarding the aerosolization of toxic cyanobacteria and cyanotoxins emitted from freshwater bodies during bloom seasons. To evaluate the potential health risk of the aerosolization of toxic cyanobacteria and cyanotoxins, the objectives of this study were as follows: 1) to quantify levels of microcystin in the water and air samples, and 2) to monitor microbial communities, including toxic cyanobacteria in the water and air samples. Water samples were collected from five sites in the Nakdong River, South Korea, from August to September 2022. Air samples were collected using an air pump with a mixed cellulose ester membrane filter. Concentrations of total microcystins were measured using enzyme-linked immunosorbent assay. Shotgun metagenomic sequencing was used to investigate microbial communities, including toxic cyanobacteria. Mean concentrations of microcystins were 960 μg/L ranging from 0.73 to 5,337 μg/L in the water samples and 2.48 ng/m3 ranging from 0.1 to 6.8 ng/m3 in the air samples. In addition, in both the water and air samples, predominant bacteria were Microcystis (PCC7914), which has a microcystin-producing gene, and Cyanobium. Particularly, abundance of Microcystis (PCC7914) comprised more than 1.5% of all bacteria in the air samples. This study demonstrates microbial communities with genes related with microcystin synthesis, antibiotic resistance gene, and virulence factors in aerosols generated from cyanobacterial bloom-affected freshwater body. In summary, aerosolization of toxic cyanobacteria and cyanotoxins is a critical concern as an emerging exposure route for potential risk to environmental and human health.

CO2 electroreduction to multicarbon products from carbonate capture liquid

CO2 electroreduction to multicarbon products from carbonate capture liquid

Single-Piece Membrane Supercapacitor with Exceptional Areal/Volumetric Capacitance via Double-Face Print of Electrode/Electrolyte Active Ink.

Single-piece flexible supercapacitors (FSCs) have light and ultrathin superiorities, thereby having great potential in portable/wearable electronics. However, all the available single-piece FSCs are fabricated by in situ growth routes, which are incompatible with large-scale technology. This work designs a carboxymethyl cellulose/phytic acid/polyaniline ink, incorporating electrode with electrolyte active compositions. Based on the electrode/electrolyte active ink, a double-face print technique on mixed cellulose ester and nylon membranes to fabricate single-piece membrane-FSCs, where both sides of membranes can be utilized well, is proposed. Consequently, one FSC is measured to be only ≈0.785 cm2 in area, ≈0.021g in weight, and ≈200µm in thickness, while it has exceptional areal and volumetric capacitances up to 757 mF cm-2 and 37.8 F cm-3 , respectively, based on the entire device. It also exhibits high flexibility with a capacitance retention of 98% after 2000 bend cycles from 0° to 180°. The state-of-the-art FSCs are expected to have exciting prospects in portable/wearable electronics, smart reading, and flexible displays. The preparation strategy renders the massive production of large-area and mini-size arrayed FSCs, and also the "do-it-yourself" or homemade preparation, which adds more interest and designability for general users.

A comparative study on environmental surveillance of enterovirus: Using a two-phase separation method and a filtration method with a mixed cellulose ester (MCE) membrane

This study aimed to compare the sensitivity of two-phase separation and the filtration method using a mixed cellulose ester (MCE) membrane to detect enteroviruses in sewage samples. From December 2015 to July 2016, four domestic sewage samples (1 L/sample) were collected monthly from the Guangzhou Liede Sewage Treatment Plant, and each sewage sample was divided into two aliquots (500 mL). The sewage sample was concentrated using the two-phase separation and the filtration method using an MCE membrane, and the treated solutions were inoculated into cells for enterovirus isolation. Polymerase chain reaction amplification, VP1 sequencing, and enterovirus molecular typing were performed on the positive isolates. The detection rates of poliovirus (PV) and non-polio enterovirus (NPEV) obtained using the filtration method using an MCE membrane were higher than those using the two-phase separation method. McNemar's test showed that the detection rates of PV, NPEV, type 1 Sabin-like (SL1), type 2 Sabin-like (SL2), and type 3 Sabin-like (SL3) strain were not statistically significant (P > 0.05). In Guangdong Province, China, the detection rates for PV and NPEV were 53.13% and 62.50% (20/32), respectively. Twenty-seven PVs were isolated, three highly variable strains of the type 1 vaccine, with seven nucleotide substitutions in the VP1 region, compared with the type 1 Sabin strains. Eighty-seven strains of NPEV were isolated and nine serotypes were identified, among which coxsackievirus B3 (CVB3), echovirus 6(E6), and echovirus 11(E11) were the dominant strains. The filtration method using an MCE membrane is more sensitive than two-phase separation and can be used as a robust, sensitive, and cost-effective method to isolate enteroviruses from sewage.

Mixed cellulose ester membrane as an ion redistributor to stabilize zinc anode in aqueous zinc ion batteries

Aqueous zinc-ion batteries (AZBs) with high energy density, low cost and environmental characteristics, have become the promising device for energy storage. However, uncontrolled zinc dendrite growth remains an impediment to the popularization of AZBs. The unrestricted two-dimensional (2D) ions diffusion is the main cause of the above defect. In this work, mixed cellulose ester (MCE) membrane is proposed as the separator. A dense homogeneous pore structure can achieve a physical shunting effect on ion diffusion, which can control and homogenize the ion motion. Further, the mechanism of this physical pore effect is confirmed by comparing the behavior of Zn deposition in MCE systems with different pore sizes but the same composition. As conjectured, a membrane with a smaller pore size is more favorable. In addition, the MCE contains many polar oxygen-containing functional groups that can facilitate and modulate ion diffusion through coordination. This chemical ion guiding effect, together with the above physical pore effect, gives the separator the ability to suppress dendrite formation. Zn/Zn symmetric cells with this membrane exhibit ultralong cycle life exceeding 1250 h at 0.5 mA cm−2 and 1000 h at 5 mA cm−2. And the Zn//MnO2 battery presents excellent cycle stability for more than 500 cycles with a capacity retention of 90.67%. This work proposes MCE separators and reveals their coordinated regulation of physical and chemical effects on metal-based anodes. This will shed light on the development of high-performance separators and AZBs.

Tunable nanostructured stainless-steel coating for high-selective and high-permeable separation membranes for oil/water emulsions

This paper demonstrates a stainless-steel (SS) nano-pyramid structure (diameter of ~20–50 nm and pore size of 156.1 nm) sputter-coated on mixed cellulose ester (MCE) membrane for the use in separation of oil/water emulsions. SS-coated MCE membrane presented a superhydrophilic, antifouling surface as well as underwater superoleophobicity. The coated membrane achieved excellent separation efficiency of >99% when applied to light oil-water emulsions with a range of viscosities and densities. The highest permeation flux measured was 1,555 L m−2 h−1 when applied to toluene-in-water emulsions. The membrane also presented outstanding recyclability, as evidenced by oil rejection rate retaining at >99% through four separation cycles. The coated membrane was also shown to work well under harsh conditions including salty water, extreme pH values (1–14), and high temperatures (60 °C). In addition, our fabrication route of SS-coated MCE employs low process temperature while being highly scalable, which is favorable for industrial-scale applications.

High-performance copper nanowire electrode for efficient flexible organic light-emitting diode

Highly conductive and robust polyvinyl alcohol/copper nanowire (PVA/CuNW) flexible transparent conductive electrode (FTCE) is fabricated via a simple and low-cost process at room temperature. The CuNW film is formed on a mixed cellulose ester (MCE) membrane by vacuum filtration. Subsequently, the flowing glacial acetic acid (GAA)-toluene solution passes through them to remove the oxide layer without damaging nanowires. The final PVA/CuNW FTCE is constructed by embedding the treated CuNWs into a pre-prepared PVA binding layer on the polyethylene terephthalate (PET) substrate, which presents excellent conductivity with a low sheet resistance of 46.2 Ω / s q and a high transparency of 90.5% at 550 nm. Meanwhile, the chemical and mechanical stability have been significantly enhanced compared with the bare CuNW FTCE attributed to the protective effect of the PVA binding layer. A flexible phosphorescent OLED device using such PVA/CuNW FTCE as the anode exhibits a current efficiency of 26.4 cd/A at 1000 cd/m 2 , which is comparable to that of the reference device (27.1 cd/A) based on indium tin oxide anode on glass, indicating its high potential for application in flexible optoelectronics. • Highly conductive PVA/CuNW electrodes are fabricated at room temperature. • The electrode shows excellent optoelectronic properties. • Low roughness as well as significantly enhanced chemical and mechanical stability has been achieved. • The flexible OLED device using PVA/CuNW exhibits high luminance and efficiency.

Core-shell structured, mixed cellulose ester-alumina composite membranes for air filters with improved environmental resistance

In this study, a composite membrane was developed by conformally coating an ultrathin Al2O3 layer through low-temperature (90 °C) atomic layer deposition (ALD) on a hydrophilic mixed cellulose ester (MCE) membrane with a 3D networked microporous structure. The thickness of the deposited Al2O3 layer, without clogging the pores of the membrane, was precisely controlled by varying the number of ALD cycles from 100 to 300. The ultrathin (∼33 nm) Al2O3 layer greatly enhanced the resistance to various environmental stimuli and contributed to the improved removal efficiency of airborne particulate matter (PM), owing to the reduced pore size. The resulting composite membrane installed on an insect screen exhibited excellent removal efficiency (>99%) for PM of various sizes (PM1.0, PM2.5, and PM10) at a controlled flow rate of 1 L/min. In particular, unlike polypropylene-based commercial PM filters that strongly rely on electrostatic adsorption for PM filtration, the reduction in the PM removal efficiency caused by water or ethanol was negligible in the developed composite membrane, enabling long-term use even in extreme environments.