Active Power Loss Minimization Research Articles

Graph theory-enhanced integrated distribution network reconfiguration and distributed generation planning: A comparative techno-economic and environmental impacts analysis

In today's world, eco-friendly solutions are crucial for efficient power delivery and assessing their corresponding economic and environmental benefits is essential. As innovators, it is also imperative to continually improve on existing techniques to solve a problem. Evaluating the existing literature in this area of study, gaps of improving the optimization techniques by reducing the amount of infeasible configurations the reconfiguration procedure encounters was established, additionally, the need to utilize distributed generations that significantly reduce carbon footprint in the environment was also ascertained. Hence, this paper presents an effective integration method for the simultaneous reconfiguration of Radial Distribution Networks (RDNs) and Photovoltaic (PV) DGs allocation, considering the tripodal issues of cost, operational efficiency, and environmental sustainability. A modification of the adaptive mountain gazelle optimizer (AMGO) enhanced with graph theory is deployed for the optimization procedures. The crucial feature of the proposed approach is the reduction of unfeasible configurations throughout the optimization procedure toward satisfying the network's radiality constraints, achieving consistent convergence and reduced computation time. The technical benefits are active power loss minimization, voltage stability, and voltage profile improvement. The economic benefits are analyzed by estimating the purchased power, the associated cost of power losses, and the cost of DGs and switches over a planning period of 20 years. The consequent environmental benefits are analyzed in detail, highlighting the significant reduction in pollutant emissions. The proposed model was tested on the IEEE 33- and 69-bus RDN, considering several scenarios, including synchronous network reconfiguration and DG installations. From the results procured, the simultaneous network reconfiguration and DG allocation provided better outcomes, yielding minimum active power loss of 35.36 kW, minimum voltage of 0.9541 p.u., voltage stability index of 1.9936 p.u., total planning cost of $3.456 million, and emission of 1.744 million lb/hr, respectively, for the 33-bus systems. The corresponding value for the 69-bus system is 32.57 kW, 0.9832 p.u., 2.3847 p.u., $ 2.524 million, and 2.53 million lb/hr, respectively. The proposed model was compared with other reported techniques for performance validation, and its efficacy and superior performance was established.

Harmonics management and hosting capacity enhancement: Optimal double-resistor damped double-tuned power filter with artificial hummingbird optimization.

This paper introduces a novel and improved double-resistor damped double-tuned passive power filter (DR-DDTF), designed using multi-objective optimization algorithms to mitigate harmonics and increase the hosting capacity of distribution systems with distributed energy resources. Although four different topologies of single-resistor damped double-tuned filters (DDTFs) have been studied before in the literature, the effectiveness of two different DR-DDTF configurations has not been examined. This work redresses this gap by demonstrating that via comprehensive simulations on two power systems, DR-DDTF provides better harmonic suppression and resonance mitigation than single-resistor alternatives. When it comes to optimizing the DR-DDTF for maximum hosting capacity and minimum system active power losses, the multi-objective artificial hummingbird outperformed six other algorithms in the benchmark. To allow for higher penetration of distributed generation without requiring grid upgrades, this newly developed harmonic mitigation filter provides a good alternative.

Integration of optimal power flow with combined heat and power dispatch of renewable wind energy based power system using chaotic driving training based optimization

Combined heat and power economic dispatch (CHPED) based optimal power flow (OPF) problem has been studied in this article using a new, practical approach based on chaotic driving training optimization (DTBO) (CDTBO). In the proposed technique (CDTBO), the chaotic based learning is integrated with DTBO to overcome the local optimal problem and inferior convergence speed of the existing algorithms. OPF is an important concern to retain the power system running effectively. In order to meet the demand for reasonably priced power generation with optimal power flow in transmission lines, the authors combined CHPED and OPF. Since fuel is changing daily in the current environment, using renewable energy sources to generate electricity economically is crucial. The renewable energy source like wind energy is integrated with thermal units for economic power generation with reducing the thermal fuel consumption of CHPED-based OPF system. The proposed technique implemented on CHPED based IEEE-30 bus system for renewable and without renewable energy sources with considering different cases. The suggested problem considering with valve point loading of thermal units, transmission losses and uncertainties of wind speed to address the non-linearity of the renewable-based CHPED-OPF system. Cost minimization, voltage deviation control, transmission losses minimization and stability index are the single objectives of the prospective system. Furthermore tested on multi-objective functions for simultaneously minimization of cost with emission and simultaneously minimization of active power loss with voltage profile. It is observed that the proposed CDTBO technique helps to reduce the cost by 2% and 12.8% for renewable based system as compared to non-renewable system for multi-objective function. The robustness of the proposed solution has been verified by implementing the statistical analysis on two systems with least variation of mean and optimal values of cost with the tolerance of less than 0.0035%. A comparison has been made with recent well known optimization techniques to address the superiority of the suggested CDTBO algorithm.

Maximizing EV profit and grid stability through Virtual Power Plant considering V2G

The electrification of transportation through the widespread adoption of electric vehicles (EVs) has raised substantial concerns within the realm of power grid operations. This concern predominantly stems from the elevated electricity demand brought about by the surging population of EVs, consequently exerting strain on the power grid infrastructure which can be reduced with vehicle-to-grid (V2G) technology integration. To address this issue, this paper delves further into the realm of grid integration by introducing a Virtual Power Plant (VPP) concept to enhance the synergy between EVs and power grid. This study aims to compare different realistic objectives, ranging from total active power loss and voltage drop minimization to EV profit maximization and then optimize the balance between the distribution grid power quality and VPP profit through bi-level modeling. The presented model is devised as mixed-integer quadratically constrained programming (MIQCP) and incorporates Temporal Convolutional Network (TCN) based forecasting to handle the uncertain behavior of the residential loads using historical data. The experiments are conducted in IEEE 33-Bus and real-world 240-Bus distribution networks. The results indicate that enabling bidirectional power flow between the grid and VPP can yield significant profits for EV users while only marginally impacting the active power loss, approximately around 5%. This validation underscores how V2G not only presents various advantages for power system operators but also benefits EV users simultaneously.

Optimal distributed generators allocation with various load models under load growth using a meta-heuristic technique

Distribution network planning and operation are facing several problems, including asset congestion, voltage fluctuations, and system instability. The adequate planning and modeling of distributed generators and capacitor banks must quantify these problems. This article presents the optimal allocation of distributed generators in parallel with capacitor banks in distribution networks with single and multi-objectives using the Gazelle Optimization Algorithm (GOA) and Mountain Gazelle Optimization Algorithm (MGOA). The single objective framework includes technical objectives like minimization of active power losses. The multi-objective framework includes technical and non-technical objectives like simultaneously minimization of active power losses, voltage stability, and voltage deviation, and minimization of polluting greenhouse gases and total electricity purchase cost. Furthermore, these planning problems are investigated by three case studies on different nonlinear voltage-dependent models at two different loading conditions from future planning perspectives. The effectiveness and feasibility of the MGOA are evaluated on the IEEE standard 33 bus system. As a result, the MGOA demonstrates a remarkable reduction in technical and non-technical objectives in all types of distributed generator placement. Moreover, a comparative analysis of other existing research works validated the efficiency and feasibility of established algorithms at each use case with different load models by improving all the objective functions of network planning. In single-objective and multi-objective frameworks, the active power losses reduce to 94.42% and 93.57% in the voltage-independent model, respectively. Meanwhile, the non-technical objectives are also significantly improved for each load model, further validating the efficiency of the proposed algorithms.

Power Loss Reduction and Reliability Improvement of Radial Distribution Systems Using Optimal Capacitor Placement Technique

Improving reliability and power quality in Radial Distribution Systems (RDS) is of large significance to ensure the provision of electricity within a reliable and acceptable standard to consumers with increasing load requirements. An Optimal Capacitor Placement (OCP) technique is used in the present work to achieve the highest power quality and system reliability in a balanced manner at the same time. The proposed technique has been tested with 69 typical IEEE RDS buses using the Improved Binary Particle Swarm Optimization (IBPSO) algorithm. The proposed algorithm shows a high ability to find the best location and size of injected capacitors inside the RDS to implement a single-objective function for minimization of Active Power Loss (APL). The simulation results obtained from the MATLAB environment show that the OCP technique has a significant potential to enhance RDS reliability, bus voltage, and loss reduction as compared to other previous work.

Optimization of Distributed Generation in Radial Distribution Network for Active Power Loss Minimization using Jellyfish Search Optimizer Algorithm

The inclusion of distributed generation (DG) units in the distribution network (DN) effectively cuts down the power losses (PL) and strengthens the voltage profile (VP). This paper examines the effect of allocating different distributed generation (DG) in radial distribution networks (RDN) through an implementation of an optimization technique using a recently introduced bio- inspired algorithm known as a jellyfish search optimizer (JSO). Unlike the other optimization algorithms, the JSO algorithm evades the local optimal trap and reaches the optimal solution in less time. The DG position(s) and size(s) are optimized for active power loss (APL) minimization with respect to several constraints. The effectiveness and robustness of the proposed optimization technique using JSO algorithm is investigated on a balanced IEEE RDNs with 33, 69 and 118-buses. The simulation outcomes are obtained for different types (type I, II and III) of DG placement. Additionally, a comprehensive comparative study has been performed for the JSO and other algorithms. The comparison exemplifies that the proposed JSO optimization approach produces a better optimal solution with steady convergence than other techniques reported in the literature. Also, the simulation findings show the potentiality of JSO optimization method for solving complex optimization problems.

Two-Stage Approach for Demand Side Management in Multi-Smart Grids

In the face of escalating electricity demand driven by technological advancements and a growing population, efficient management becomes imperative. This study explores demand-side management (DSM) within smart grids (SGs) to minimize customer bills, alleviate peak loads, and mitigate losses. The research employs diverse strategies and compares their effectiveness, focusing on optimal load consumption across smart microgrids. Key contributions include a DSM strategy for cost reduction, efficient peak load reduction, and active power loss minimization in smart microgrids. The proposed approach is validated through simulations, with results contributing to real-world SG implementation. The study highlights a 23.4% and 31.6% cost saving for residential and commercial customers, respectively, and emphasizes the significance of load management in enhancing operational efficiency and cost-effectiveness within the energy hub framework. The research provides valuable insights for developing advanced consumption management strategies, ensuring energy efficiency and sustainability in future power systems.

Electric Network Operation Mode Optimization According to the Minimum Active Power Loss Criterion

Electric Network Operation Mode Optimization According to the Minimum Active Power Loss Criterion

Active and Reactive Power loss Minimization Along with Voltage profile Improvement for Distribution Reconfiguration

Optimal distribution network reconfiguration (DNR), distributed generations location and sizing (DGs-LS), tap changer adjustment (TCA), and capacitors bank location and sizing (CAs-SL) are different methodologies used to reduce loss and enhance the voltage profile of distribution systems. DNR is the process of changing the network topography by changing both sectionalized and tie switch states. The optimal location looks to find the optimal setting of the DG and CA within the distribution network. Optimal size seeks to find the optimal output generation of both DG and CA. The TCA looks to find the optimal position for TC. These methods are challenging optimization problems and resort to meta-heuristic techniques to find a globally optimal solution. This paper presents a new methodology with which to simultaneously solve the problem of DNR, DGs-LS, TCA, and CAs-SL in distribution networks. This work aims to minimize active and reactive power losses, including voltage profile improvement using a multi-objective decision approach. The firefly algorithm (FA) and analytic hierarchy process (AHP) are used to optimize the fitness function and determine the function weight factors through the use of MATLAB software. Several scenarios were considered on the IEEE 69-bus network. In terms of active power and reactive losses, reductions in the test system of 96.16% and 92.7%, respectively, were achieved, evidencing the positive impact of the proposed methodology on distribution networks.

A new continuous variables and convex relaxation based formulation for reconfiguration of unbalanced mutually coupled active distribution networks

With the integration of renewable energy-based sources and demand response initiatives, the distribution network has transformed into an active network with bidirectional flows. Network Reconfiguration (NR), i.e., changing network topology, is an alternative to minimize power loss in the distribution network with sectionalizing switches (normally closed) and tie-line switches (normally open). Due to the discrete nature of switches (on or off), the NR formulation is generally a mixed-integer NP-hard nonlinear problem. This paper proposes the first NR formulation for an unbalanced active distribution network with continuous variables to indicate switches’ statuses in NR while considering mutual coupling between line impedances. The obtained solution provides the optimal real power and voltage magnitude settings of dispatchable Distributed Generators (DGs) and network topology for the minimum active power loss in the network. The proposed formulation considers all practical aspects of the distribution network, i.e., mutual coupling, load unbalances, angular unbalance, and the absence of one or two phases in a line section, which, otherwise, have not been considered together in previous formulations. Further, a novel convex relaxation for bus voltage phase angles avoids explicit voltage recovery. Compared to prior formulations, numeric results for unbalanced radial distribution networks showcase the proposed formulation’s effectiveness.

Minimization of Active Power Loss Using Enhanced Particle Swarm Optimization

Identifying the weak buses in power system networks is crucial for planning and operation since most generators operate close to their operating limits, resulting in generator failures. This work aims to identify the critical/weak node and reduce the system’s power loss. The line stability index (Lmn) and fast voltage stability index (FVSI) were used to identify the critical node and lines close to instability in the power system networks. Enhanced particle swarm optimization (EPSO) was chosen because of its ability to communicate with better individuals, making it more efficient to obtain a prominent solution. EPSO and other PSO variants minimized the system’s actual/real losses. Nodes 8 and 14 were identified as the critical nodes of the IEEE 9 and 14 bus systems, respectively. The power loss of the IEEE 9 bus system was reduced from 9.842 MW to 7.543 MW, and for the IEEE 14 bus system, the loss was reduced from 13.775 MW of the base case to 12.253 MW for EPSO. EPSO gives a better active power loss reduction and improves the node’s voltage profile than other PSO variants and algorithms in the literature. This suggests the feasibility and suitability of EPSO to improve the grid voltage quality.

Assessment of Converter Performance in Hybrid AC-DC Power System under Optimal Power Flow with Minimum Number of DC Link Control Variables

This paper presents a strategy to evaluate the performances of converter stations under the optimized operating points of hybrid AC-DC power systems with a reduced number of DC link variables. Compared to previous works reported with five DC-side control variables (CVs), the uniqueness of the presented optimal power flow (OPF) formulation lies within the selection of only two DC-side control variables (CVs), such as the inverter voltage and current in the DC link, apart from the conventional AC-side variables. Previous research has mainly been focused on optimizing hybrid power system performance through OPF-based formulations, but has mostly ignored the associated converter performances. Hence, in this study, converter performance, in terms of ripple and harmonics in DC voltage and AC current and the utilization of the converter infrastructure, is evaluated. The minimization of active power loss is taken as an objective function, and the problem is solved for a modified IEEE 30 bus system using a recently developed and very efficient Archimedes optimization algorithm (AOA). Case studies are performed to assess the efficacy of the presented OPF model in power systems, as well as converter performance. Furthermore, the results are extended to assess the applicability of the proposed model to the allocation of photovoltaic (PV)-type distributed generations (DGs) in hybrid AC-DC systems. The average improvement in power loss is found to be around 7.5% compared to the reported results. Furthermore, an approximate 10% improvement in converter power factor and an approximate 50% reduction in ripple factor are achieved.

Using the Whale Optimization Algorithm to Solve the Optimal Reactive Power Dispatch Problem

The optimal reactive power dispatch (ORPD) is a complex, optimal non-meritorious control issue with continuous and discontinuous control variables. This article exhibits a whale optimization algorithm (WOA) motivated by the whale’s bubble-net hunting tactic to resolve ORPD. The intention is to comply with certain constraints to promote the voltage transmission quality by adequately altering the parameters. The WOA not only equalizes exploitation and exploration to maximize the overall performance and eliminate search stagnation but also has remarkable sustainability and robustness to accomplish superior convergence speed and computation accuracy. The WOA is contrasted with MFO, BA, GOA, GWO, MDWA, SMA, SPBO and SSA by diminishing the fitness value to highlight the superiority and stability. The experimental results reveal that WOA exhibits a superior convergence level and computation precision to accomplish the minimum active power loss and superior control variables.

Hybrid GWO-PSO based optimal placement and sizing of multiple PV-DG units for power loss reduction and voltage profile improvement

Distributed generation (DG) is integrated in a passive distribution system to reduce power loss, improve voltage profile, and increase power output. To reap the most benefits of the distribution system, the best location and appropriate DG size must be determined. This paper presents a hybrid Grey wolf Optimizer (GWO) and Particle swarm optimization (PSO) approach for determining the best placement and DG size while considering a multi-objective function that includes active and reactive power loss minimization as well as voltage profile enhancement. Dilla distribution system was used as a case study and the weighted technique was used to convert to a single objective function while taking into account multiple constraints such as bus voltage limit, DG output limit, and branch current limit. DG penetration is limited to up 60% of the total active load on the feeder and a forward–backward sweep load flow algorithm was used to generate the load flow solutions. The findings of the study show that combining three PV-DGs (Case 3) is the best way to improve voltage profile and minimize losses. In addition, the proposed hybrid GWO-PSO algorithm performed better compared to the other four algorithms (Grey Wolf Optimization (GWO), Whale Optimization Algorithm (WOA), Particle swarm optimization (PSO), and sine cosine algorithm (SCA)) in terms of achieving the best multi-objective function (MOF) outcome.

Optimal Sizing and Deployment of Renewable Energy Generators in Practical Transmission Network Using Grid-Oriented Multiobjective Harmony Search Algorithm for Loss Reduction and Voltage Profile Improvements

This paper presents grid-oriented multiobjective harmony search algorithm (GOMOHSA) to incorporate the multiple grid parameters for minimization of the active power loss, reactive power loss, and total voltage deviations (TVD) in a part of practical transmission network of Rajasthan Rajya Vidyut Prasaran Nigam Limited (RVPN) in southern parts of Rajasthan state of India. This is achieved by optimal deployment of optimally sized renewable energy (RE) generators using GOMOHSA. Performance indexes such as active power loss minimization index (APMLI), the reactive power loss minimization index (RPMLI), and the total voltage deviation improvement index (TVDII) are introduced to evaluate the health of the test network with different load scenarios. Performance of proposed GOMOHSA has been tested for five different operating scenarios of loads and RE generation. It is established that the proposed GOMOHSA finds the optimal deployment of optimally sized RE generators, and the investment cost of deployment of these RE generators can be recovered within a time period that is less than 5 years. Performance of GOMOHSA is superior compared to a conventional genetic algorithm (GA) in terms of performance indexes, RE generator capacity, payback period, and parameter sensitivity. Study is performed using MATLAB software for loading scenario of base year 2021 and projected year 2031.

Application of whale algorithm optimizer for unified power flow controller optimization with consideration of renewable energy sources uncertainty

Purpose. In this paper an allocation methodology of Flexible Alternating Current Transmission Systems (FACTS) controllers, more specifically, the Unified Power Flow Controller (UPFC) is proposed. As the penetration of Renewable Energy Sources (RESs) into the conventional electric grid increases, its effect on this location must be investigated. Research studies have shown that the uncertainty of RESs in power generation influences the reactive power of a power system network and consequently its overall transmission losses. The novelty of the proposed work consists in the improvement of voltage profile and the minimization of active power loss by considering renewable energy sources intermittency in the network via optimal location of UPFC device. The allocation strategy associates the steady-state analysis of the electrical network, with the location and adjustment of controller parameters using the Whale Optimization Algorithm (WOA) technique. Methodology. In order to determine the location of UPFC, approaches are proposed based on identification of a line which is the most sensitive and effective with respect to voltage security enhancement, congestion alleviation as well as direct optimization approach. The optimum location of UPFC in the power system is discussed in this paper using line loading index, line stability index and optimization method. The objective function is solved using the WOA algorithm and its performance is evaluated by comparison with Particle Swarm Optimization (PSO) algorithm. Results. The effectiveness of the proposed allocation methodology is verified through the analysis of simulations performed on standard IEEE 30 bus test system considering different load conditions. The obtained results demonstrate that feasible and effective solutions are obtained using the proposed approach and can be used to overcome the optimum location issue. Additionally, the results show that when UPFC device is strategically positioned in the electrical network and uncertainty of RES is considered, there is a significant influence on the overall transmission loss and voltage profile enhancements of the network.

Optimal Placement and Sizing of Renewable and Non-Renewable Resources in Smart Grid

Distributed Generators (DGs) play a key role in existing power distribution networks together with significant innovations in smart grid technology. It is now more essential to evaluate the various types of DGs within the system. Renewable energy types of DGs such as PV and wind promise low emissions and abundant availability. When it comes to the installation of DG, the size, location, and type of DG should be given high importance because improper placement of DG units leads to reducing the benefits of the distribution system and even endangers the entire system operation. If DG size exceeds a certain value limit, power loss at that bus becomes negative. This situation must be avoided. As a result, optimal DG placement aids in the reduction of losses, improvement of voltage profiles, reliability, and overall system efficiency. Considering this, in this paper, a Simultaneous Particle Swarm Optimization (PSO) algorithm is implemented for placement allocation and sizing of multiple types and multiple numbers of DGs in power distribution systems with the objectives of minimization of active and reactive power loss and enhanced voltage profile. Along with the meta-heuristic optimization algorithm, sensitivity techniques such as index vector, loss sensitivity factor, and voltage stability margin methods have been analysed. The outcomes are obtained using the aforementioned sensitivity-related methods on the IEEE 15, 33, 69, and 85-radial bus systems and compared with simultaneous PSO for efficacy.

Location and size selection using hybrid Jaya‐Luus‐Jaakola algorithm for decentralized generations in distribution system considering demand‐side management

AbstractIn the distribution system, decentralized generation is incorporated to maximize the system reliability and economic stability, and to avoid redundancy in system. The efficient implementation of distributed‐generations (DGs) in a distribution‐system (DS) can be done by employing demand‐side management (DSM). In this research proposal, location and size selection of DGs in a DS considering DSM is accomplished using a hybrid Jaya‐Luus‐Jaakola (JLJ) algorithm. The hybridization of Jaya algorithm (JA) with Luus‐Jaakola algorithm (LJA) is done with a view to improving the rate of convergence of the algorithm. Three design objectives of minimization of active power loss and voltage deviation along with maximization of voltage stability index are considered in this research proposal. These design objectives under consideration are integrated together to form a problem of a single objective by assignments of weights. The formulated problem is minimized using proposed hybrid algorithm subjected to system constraints such as balance of power, limits on bus voltage and line capacity, and generation level of DGs. A static penalty is added to the formulated problem in case of any constraint violations. A photo‐voltaic‐based DG is used in the 33‐bus standard radial‐distribution‐system (RDS). A DSM scenario is created by shifting some loads of peak hours to off‐peak hours in view of minimizing the total cost of generation. The potency and superiority of the proposed algorithm is validated with the help of comparison of the results obtained by exploiting proposed method with results acquired from available state‐of‐art algorithms in literature. The comparison proves the comparative superior performance of the proposed algorithm.

Pareto Front-Based Multiobjective Optimization of Distributed Generation Considering the Effect of Voltage-Dependent Nonlinear Load Models

Single objective constant PQ load models were extensively considered for site and size of distributed generation (DG) and shunt capacitor (SC) allocation. Which may lead to single non-dominated solution of unpredictable and misleading results about their site and size, loss reduction and payback period. Therefore, primary objective of this study is to investigate the effects of seven nonlinear voltage-dependent load models for the siting and sizing of DG and SC considering various conflicting Multiobjective functions. These objective functions are minimization of active power loss, voltage deviation, cost of energy loss per year, the total cost of installed DG and SC, and emission. Three study cases of simultaneous optimization of two and three objective functions are intended to find optimal integration of DG and SC in the standard 33 and 118-bus radial distribution network considering seven nonlinear voltage-dependent load models. A new Multiobjective evolutionary algorithm (MOEA) called Bidirectional Coevolutionary (BiCo) is applied to the proposed study cases to demonstrate the impact of load model on DG and SC allocation. Further, to show the superiority and performance of proposed algorithm, six state-of-the-art MOEAs are implemented and statistically compared with proposed algorithm using a representative hypervolume indicator (HVI). The maximum savings in annual cost of annual energy loss reaches 58.99% in case1 of PQ load model, 59.4% in case 2 and 64.96% in case 3 of industrial load model considering only DG allocation, whereas, 93.673% in constant PQ load model of case1, 78.908% in constant current load model of case2 and 93.403% of case3 of PQ load model considering simultaneous DG and SC. Simulation results show that the proposed algorithm is adept and suitable to find a better trade-off between various conflicting objective functions compared to other recently designed MOEAs.