Mid-infrared Instrument Research Articles

DR Tauri: Temporal variability of the brightness distribution in the potential planet-forming region

We investigate the variability of the brightness distribution and the changing density structure of the protoplanetary disk around DR Tau, a classical T Tauri star. DR Tau is known for its peculiar variations from the ultraviolet (UV) to the mid-infrared (MIR). Our goal is to constrain the temporal variation of the disk structure based on photometric and MIR interferometric data. We observed DR Tau with the MID-infrared Interferometric instrument (MIDI) at the Very Large Telescope Interferometer (VLTI) at three epochs separated by about nine years, two months, respectively. We fit the spectral energy distribution and the MIR visibilities with radiative transfer simulations. We are able to reproduce the spectral energy distribution as well as the MIR visibility for one of the three epochs (third epoch) with a basic disk model. We were able to reproduce the very different visibility curve obtained nine years earlier with a very similar baseline (first epoch), using the same disk model with a smaller scale height. The same density distribution also reproduces the observation made with a higher spatial resolution in the second epoch, i.e. only two months before the third epoch.

Cryogenic thermal absorptance measurements on small-diameter stainless steel tubing

The Mid Infrared Instrument (MIRI) on the James Webb Space Telescope includes a mechanical cryocooler which cools its detectors to their 6K operating temperature. The coolant gas flows through several meters of small-diameter stainless steel tubing, which is exposed to thermal radiation from its environment. Over much of its length this tubing is gold-plated to minimize the absorption of this radiant heat. In order to confirm that the cryocooler will meet MIRI’s requirements, the thermal absorptance of this tubing was measured as a function of its environment temperature. We describe the measurement technique and present the results.

Predictions for surveys with the SPICA Mid-infrared Instrument

We present predictions for number counts and redshift distributions of galaxies detectable in continuum and in emission lines with the Mid-infrared (MIR) Instrument (SMI) proposed for the Space Infrared Telescope for Cosmology and Astrophysics. We have considered 24 MIR fine-structure lines, four polycyclic aromatic hydrocarbon bands (at 6.2, 7.7, 8.6 and 11.3 μm) and two silicate bands (in emission and in absorption) at 9.7 and 18.0 μm. Six of these lines are primarily associated with active galactic nuclei (AGNs), the others with star formation. A survey with the SMI spectrometers of 1-h integration per field of view (FoV) over an area of 1 deg2 will yield 5σ detections of ≃ 140 AGN lines and of ≃ 5.2 × 104 star-forming galaxies, ≃ 1.6 × 104 of which will be detected in at least two lines. The combination of a shallow (20.0 deg2, 1.4 × 10−1 h integration per FoV) and a deep survey (6.9 × 10−3 deg2, 635 h integration time), with the SMI camera, for a total of ∼1000 h, will accurately determine the MIR number counts of galaxies and of AGNs over five orders of magnitude in flux density, reaching values more than one order of magnitude fainter than the deepest Spitzer 24 μm surveys. This will allow us to determine the cosmic star formation rate (SFR) function down to SFRs more than 100 times fainter than reached by the Herschel Observatory.

The Mid-Infrared Instrument for the James Webb Space Telescope, II: Design and Build

The Mid-InfraRed Instrument (MIRI) on the James Webb Space Telescope (JWST) provides measurements over the wavelength range 5 to 28.5 μm. MIRI has, within a single “package,” four key scientific functions: photometric imaging, coronagraphy, single-source low-spectral resolving power (R ∼ 100) spectroscopy, and medium-resolving power (R ∼ 1500 to 3500) integral field spectroscopy. An associated cooler system maintains MIRI at its operating temperature of < 6.7 K. This paper describes the driving principles behind the design of MIRI, the primary design parameters, and their realization in terms of the “as-built” instrument. It also describes the test program that led to delivery of the tested and calibrated Flight Model to NASA in 2012, and the confirmation after delivery of the key interface requirements.

The Mid-Infrared Instrument for the James Webb Space Telescope, X: Operations and Data Reduction

We describe the operations concept and data reduction plan for the Mid-Infrared Instrument (MIRI) for the James Webb Space Telescope (JWST). The overall JWST operations concept is to use observation templates (OTs) to provide a straightforward and intuitive way for users to specify observations. MIRI has four OTs that correspond to the four observing modes: (1) imaging, (2) coronagraphy, (3) low-resolution spectroscopy, and (4) medium-resolution spectroscopy. We outline the user choices and expansion of these choices into detailed instrument operations. The data reduction plans for MIRI are split into three stages, where the specificity of the reduction steps to the observation type increases with stage. The reduction starts with integration ramps: stage 1 yields uncalibrated slope images; stage 2 calibrates the slope images; and then stage 3 combines multiple calibrated slope images into high-level data products (e.g., mosaics, spectral cubes, and extracted source information). Finally, we give examples of the data and data products that will be derived from each of the four different OTs.

The Mid-Infrared Instrument for the James Webb Space Telescope, V: Predicted Performance of the MIRI Coronagraphs

The imaging channel on the Mid-Infrared Instrument (MIRI) is equipped with four coronagraphs that provide high-contrast imaging capabilities for studying faint point sources and extended emission that would otherwise be overwhelmed by a bright point-source in its vicinity. Such targets might include stars that are orbited by exoplanets and circumstellar material, mass-loss envelopes around post-main-sequence stars, the near-nuclear environments in active galaxies, and the host galaxies of distant quasars. This paper describes the coronagraphic observing modes of MIRI, as well as performance estimates based on measurements of the MIRI flight model during cryo-vacuum testing. A brief outline of coronagraphic operations is also provided. Finally, simulated MIRI coronagraphic observations of a few astronomical targets are presented for illustration.

The Mid-Infrared Instrument for the James Webb Space Telescope, I: Introduction

MIRI (the Mid-Infrared Instrument for the James Webb Space Telescope [JWST]) operates from 5 to 28.5 μm and combines over this range: (1) unprecedented sensitivity levels; (2) subarcsecond angular resolution; (3) freedom from atmospheric interference; (4) the inherent stability of observing in space; and (5) a suite of versatile capabilities including imaging, low- and medium-resolution spectroscopy (with an integral field unit), and coronagraphy. We illustrate the potential uses of this unique combination of capabilities with various science examples: (1) imaging exoplanets; (2) transit and eclipse spectroscopy of exoplanets; (3) probing the first stages of star and planet formation, including identifying bioactive molecules; (4) determining star formation rates and mass growth as galaxies are assembled; and (5) characterizing the youngest massive galaxies.

The Mid-Infrared Instrument for the James Webb Space Telescope, IX: Predicted Sensitivity

We present an estimate of the performance that will be achieved during on-orbit operations of the JWST mid-infrared instrument, MIRI. The efficiency of the main imager and spectrometer systems in detecting photons from an astronomical target are presented, based on measurements at subsystem and instrument-level testing, with the end-to-end transmission budget discussed in some detail. The brightest target fluxes that can be measured without saturating the detectors are provided. The sensitivity for long-duration observations of faint sources is presented in terms of the target flux required to achieve a signal-to-noise ratio of 10 after a 10,000 s observation. The algorithms used in the sensitivity model are presented, including the understanding gained during testing of the MIRI flight model and flight-like detectors.

RESOLVING THE ACTIVE GALACTIC NUCLEUS AND HOST EMISSION IN THE MID-INFRARED USING A MODEL-INDEPENDENT SPECTRAL DECOMPOSITION

We present results on the spectral decomposition of 118 Spitzer Infrared Spectrograph (IRS) spectra from local active galactic nuclei (AGN) using a large set of Spitzer/IRS spectra as templates. The templates are themselves IRS spectra from extreme cases where a single physical component (stellar, interstellar, or AGN) completely dominates the integrated mid-infrared emission. We show that a linear combination of one template for each physical component reproduces the observed IRS spectra of AGN hosts with unprecedented fidelity for a template fitting method, with no need to model extinction separately. We use full probability distribution functions to estimate expectation values and uncertainties for observables, and find that the decomposition results are robust against degeneracies. Furthermore, we compare the AGN spectra derived from the spectral decomposition with sub-arcsecond resolution nuclear photometry and spectroscopy from ground-based observations. We find that the AGN component derived from the decomposition closely matches the nuclear spectrum, with a 1-sigma dispersion of 0.12 dex in luminosity and typical uncertainties of ~0.19 in the spectral index and ~0.1 in the silicate strength. We conclude that the emission from the host galaxy can be reliably removed from the IRS spectra of AGN. This allows for unbiased studies of the AGN emission in intermediate and high redshift galaxies -currently inaccesible to ground-based observations- with archival Spitzer/IRS data and in the future with the Mid-InfraRed Instrument of the James Webb Space Telescope. The decomposition code and templates are available at http://www.denebola.org/ahc/deblendIRS.

A novel statistical approach to detect differences in fat and protein test values among mid-infrared spectrophotometers

Our objective was to develop a statistical approach that could be used to determine whether a handler’s fat, protein, or other solids mid-infrared (MIR) spectrophotometer test values were different, on average, from a milk regulatory laboratory’s MIR test values when split-sampling test values are not available. To accomplish this objective, the Proc GLM procedure of SAS (SAS Institute Inc., Cary, NC) was used to develop a multiple linear regression model to evaluate 4mo of MIR producer payment testing data (112 to 167 producers per month) from 2 different MIR instruments. For each of the 4mo and each of the 2 components (fat or protein), the GLM model was Response = Instrument + Producer + Date + 2-Way Interactions + 3-Way Interaction. Instrument was significant in determining fat and protein tests for 3 of the 4mo, and Producer was significant in determining fat and protein tests for all 4mo. This model was also used to establish fat and protein least significant differences (LSD) between instruments. Fat LSD between instruments ranged from 0.0108 to 0.0144% (α=0.05) for the 4mo studied, whereas protein LSD between instruments ranged from 0.0046 to 0.0085% (α=0.05). In addition, regression analysis was used to determine the effects of component concentration and date of sampling on fat and protein differences between 2MIR instruments. This statistical approach could be performed monthly to document a regulatory laboratory’s verification that a given handler’s instrument has obtained a different test result, on average, from that of the regulatory laboratory’s and that an adjustment to producer payment may be required.

Atmospheric transmission and thermal background emission in the mid-infrared at Mauna Kea

We present results of a preliminary study intended to quantitatively estimate the atmospheric transmission and thermal background emission in the mid-infrared (MIR), 7 μm - 26 μm, at the 13N TMT site in Mauna Kea. This is in the interest of supporting the planning of MIR instrumentation for the posible second-generation of astronomical instruments for the Thirty Meter Telescope (TMT) project. Mauna Kea, located at high altitude (4,050 m above sea level), enjoys natural conditions that make it an outstanding location for astronomical observations in the mid-infrared. The goal of this work is to produce a dataset and model that shows the atmospheric transmission and thermal emission for two cases of precipitable water vapor (PWV), a low value of 0.3 mm, and at 1.5 mm which represent near median conditions at the site. Besides, and driven by the interest of the MIR community to exploit the daily twilight times, we look at the specific atmospheric conditions around twilight as a function of season. The best conditions are found for cold and dry winter days, and in particular the morning twilight offers the best conditions. The analysis of PWV data, shows the median value for the site (all year conditions between 6:00 PM and 7:30AM) is 1.8 mm and that periods of water vapor lower than 1.0 mm are common, these supports the opportunity and discovery potential of the TMT project in the mid-infrared bands.

Standardization of milk mid-infrared spectra from a European dairy network

The goal of this study was to find a procedure to standardize dairy milk mid-infrared spectra from different Fourier transform mid-infrared spectrophotometers (different brands or models) inside a European dairy network to create new farm-management indicators (e.g., fertility, health, feed, environmental impact) based on milk infrared spectra. This step is necessary to create common spectral databases, allowing the building of statistical tools, to be used by all instruments of the network. The method used was piecewise direct standardization (PDS), which matches slave-instrument spectra on master-instrument spectra. To evaluate the possibility of using common equations on different instruments, the PDS method was tested on a set of milk samples measured on each machine, and an equation predicting fat content of milk is applied on all. Regressions were performed between master and slaves fat predictions, before and after PDS. Bias and root mean square error between predictions were decreased after PDS, respectively, from 0.3781 to 0.0000 and from 0.4609 to 0.0156 (g of fat/100mL of milk). The stability over time of these results was confirmed by an application of the coefficients created by PDS 1 mo later on the slave spectra. These preliminary results showed that the PDS method permits a reduction of the inherent spectral variability between instruments, allowing the merging of Fourier transform mid-infrared milk spectra from different instruments into a common database, the creation of new types of dairy farm management indicators, and the use of these common calibrations for all Fourier transform mid-infrared instruments of the European dairy network.

Mid-infrared spectroscopy-based analysis of mammalian cell culture parameters.

Within the framework of process analytical technology, infrared spectroscopy (IR) has been used for characterization of biopharmaceutical production processes. Although noninvasive attenuated total reflection (ATR) spectroscopy can be regarded as gold standard within IR-based process analytics, simpler and more cost-effective mid-infrared (MIR) instruments might improve acceptability of this technique for high-level monitoring of small scale experiments as well as for academia where financial restraints impede the use of costly equipment. A simple and straightforward at-line mid-IR instrument was used to monitor cell viability parameters, activity of lactate dehydrogenase (LDH), amount of secreted antibody, and concentration of glutamate and lactate in a Chinese hamster ovary cell culture process, applying multivariate prediction models, including only 25-28 calibration samples per model. Glutamate amount could be predicted with high accuracy (R(2) 0.91 for independent test-set) while antibody concentration achieved good prediction for concentrations >0.4 mg L(-1) . Prediction of LDH activity was accurate except for the low activity regime. The model for lactate monitoring was only moderately good and requires improvements. Relative cell viability between 20 and 95% could be predicted with low error (8.82%) in comparison to reference methods. An initial model for determining the number of nonviable cells displayed only acceptable accuracy and requires further improvement. In contrast, monitoring of viable cell number showed better accuracy than previously published ATR-based results. These results prove the principal suitability of less sophisticated MIR instruments to monitor multiple parameters in biopharmaceutical production with relatively low investments and rather fast calibration procedures.

Space-compatible strain gauges as an integration aid for the James Webb Space Telescope Mid-Infrared Instrument

Space instruments are designed to be highly optimised, mass efficient hardware required to operate in extreme environments. Building and testing is extremely costly, and damage that appears to have no impact on performance at normal ambient conditions can have disastrous implications when in operation. The Mid-Infrared Instrument is one of four instruments to be used on the James Webb Space Telescope which is due for launch in 2018. This telescope will be successor to the Hubble Space Telescope and is the largest space-based astronomy project ever to be conceived. Critical to operation of the Mid-Infrared Instrument is its primary structure, which provides both a stable platform and thermal isolation for the scientific instruments. The primary structure contains strain-absorbing flexures and this article summarises how these have been instrumented with a novel strain gauge system designed to protect the structure from damage. Compatible with space flight requirements, the gauges have been used in both ambient and cryogenic environments and were successfully used to support various tasks including integration to the spacecraft. The article also discusses limitations to using the strain gauge instrumentation and other implications that should be considered if such a system is to be used for similar applications in future.

CONSTRAINING THE EXOZODIACAL LUMINOSITY FUNCTION OF MAIN-SEQUENCE STARS: COMPLETE RESULTS FROM THE KECK NULLER MID-INFRARED SURVEYS

Forty-seven nearby main-sequence stars were surveyed with the Keck Interferometer mid-infrared Nulling instrument (KIN) between 2008 and 2011, searching for faint resolved emission from exozodiacal dust. Observations of a subset of the sample have already been reported, focusing essentially on stars with no previously known dust. Here we extend this previous analysis to the whole KIN sample, including 22 more stars with known near-and/or far-infrared excesses. In addition to an analysis similar to that of the first paper of this series, which was restricted to the 8-9 µm spectral region, we present measurements obtained in all 10 spectral channels covering the 8-13 µm instrumental bandwidth. Based on the 8-9 µm data alone, which provide the highest signal-to-noise measurements, only one star shows a large excess imputable to dust emission (η Crv), while four more show a significant (> 3σ) excess: β Leo, β UMa, ζ Lep, and y Oph. Overall, excesses detected by KIN are more frequent around A-type stars than later spectral types. Astatistical analysis of the measurements further indicates that stars with known far-infrared (y ≥ 70 µm) excesses have higher exozodiacal emission levels than stars with no previous indication of a cold outer disk. This statistical trend is observed regardless of spectral type and points to a dynamical connection between the inner (zodi-like) and outer (Kuiper-Belt-like) dust populations. The measured levels for such stars are clustering close to the KIN detection limit of a few hundred zodis and are indeed consistent with those expected from a population of dust that migrated in from the outer belt by Poynting-Robertson drag. Conversely, no significant mid-ilinfrared excess is found around sources with previously reported near-infrared resolved excesses, which typically have levels of the order of 1% over the photospheric flux. If dust emission is really at play in these near-infrared detections, the absence of a strong mid-infrared counterpart points to populations of very hot and small (submicron) grains piling up very close to the sublimation radius. For solar-type stars with no known infrared excess, likely to be the most relevant targets for a future exo-Earth direct imaging mission, we find that their median zodi level is 12±24 zodis and lower than 60 (90) zodis with 95% (99%) confidence, if a lognormal zodi luminosity distribution is assumed.

Study of the inner disk of the Herbig star MWC480

The inner structure and properties (temperature, mass) of the circumstellar disk of Herbig star MWC480 are studied by stellar interferometry method used in the infrared and are interpreted using semi-analytical models. From these models, the SED (Spectral Energy Distribution) was fitted and multi- wavelength intensity map of the source were calculated. The intensity map provides the input for modeling the Keck Interferometer (KI) data in the near-infrared (near-IR) and the data of the Very Large Telescope Interferometer (VLTI) with the mid-infrared instrument MIDI. We conclude that with our limited set of data, we can fit the SED, the Keck visibilities and the MIDI visibilities using a two-components disk model. Furthermore, we suspect that MWC480 has a transitional dusty disk. However, we need more MIDI observations with different baseline orientations to confirm our modeling.

Imaging the outward motions of clumpy dust clouds around the red supergiant Antares with VLT/VISIR

We present a 0.5"-resolution diffraction-limited 17.7 micron image of the red supergiant Antares obtained with the VLT mid-infrared instrument VISIR. The VISIR image shows six clumpy dust clouds located at 0.8"--1.8" (43--96 stellar radii = 136--306 AU) away from the star. We also detected compact emission within a radius of 0.5" from the star. Comparison of our VISIR image taken in 2010 and the 20.8 micron image taken in 1998 with the Keck telescope reveals the outward motions of four dust clumps. The proper motions of these dust clumps amount to 0.2"--0.6" in 12 years. This translates into expansion velocities (projected onto the plane of the sky) of 13--40 km/s with an uncertainty of +/-7 km/s. The velocities of the dust clumps cannot be explained by a simple accelerating outflow, implying the possible random nature of the dust cloud ejection mechanism. The inner compact emission seen in the 2010 VISIR image is presumably newly formed dust, because it is not detected in the image taken in 1998. The mass of the dust clouds is estimated to be (3-6)x10^{-9} Msun. These values are lower by a factor of 3--7 than the amount of dust ejected in one year estimated from the (gas+dust) mass-loss rate of 2x10^{-6} Msun/yr, suggesting that the continuous mass loss is superimposed on the clumpy dust cloud ejection.

Invited article: An integrated mid-infrared, far-infrared, and terahertz optical Hall effect instrument.

We report on the development of the first integrated mid-infrared, far-infrared, and terahertz optical Hall effect instrument, covering an ultra wide spectral range from 3 cm(-1) to 7000 cm(-1) (0.1-210 THz or 0.4-870 meV). The instrument comprises four sub-systems, where the magneto-cryostat-transfer sub-system enables the usage of the magneto-cryostat sub-system with the mid-infrared ellipsometer sub-system, and the far-infrared/terahertz ellipsometer sub-system. Both ellipsometer sub-systems can be used as variable angle-of-incidence spectroscopic ellipsometers in reflection or transmission mode, and are equipped with multiple light sources and detectors. The ellipsometer sub-systems are operated in polarizer-sample-rotating-analyzer configuration granting access to the upper left 3 × 3 block of the normalized 4 × 4 Mueller matrix. The closed cycle magneto-cryostat sub-system provides sample temperatures between room temperature and 1.4 K and magnetic fields up to 8 T, enabling the detection of transverse and longitudinal magnetic field-induced birefringence. We discuss theoretical background and practical realization of the integrated mid-infrared, far-infrared, and terahertz optical Hall effect instrument, as well as acquisition of optical Hall effect data and the corresponding model analysis procedures. Exemplarily, epitaxial graphene grown on 6H-SiC, a tellurium doped bulk GaAs sample and an AlGaN/GaN high electron mobility transistor structure are investigated. The selected experimental datasets display the full spectral, magnetic field and temperature range of the instrument and demonstrate data analysis strategies. Effects from free charge carriers in two dimensional confinement and in a volume material, as well as quantum mechanical effects (inter-Landau-level transitions) are observed and discussed exemplarily.

Mid-infrared interferometry withKband fringe-tracking

Context: A turbulent atmosphere causes atmospheric piston variations leading to rapid changes in the optical path difference of an interferometer, which causes correlated flux losses. This leads to decreased sensitivity and accuracy in the correlated flux measurement. Aims: To stabilize the N band interferometric signal in MIDI (MID-infrared Interferometric instrument), we use an external fringe tracker working in K band, the so-called FSU-A (fringe sensor unit) of the PRIMA (Phase-Referenced Imaging and Micro-arcsecond Astrometry) facility at VLTI. We present measurements obtained using the newly commissioned and publicly offered MIDI+FSU-A mode. A first characterization of the fringe-tracking performance and resulting gains in the N band are presented. In addition, we demonstrate the possibility of using the FSU-A to measure visibilities in the K band. Methods: We analyzed FSU-A fringe track data of 43 individual observations covering different baselines and object K band magnitudes with respect to the fringe-tracking performance. The N band group delay and phase delay values could be predicted by computing the relative change in the differential water vapor column density from FSU-A data. Visibility measurements in the K band were carried out using a scanning mode of the FSU-A. Results: Using the FSU-A K band group delay and phase delay measurements, we were able to predict the corresponding N band values with high accuracy with residuals of less than 1 micrometer. This allows the coherent integration of the MIDI fringes of faint or resolved N band targets, respectively. With that method we could decrease the detection limit of correlated fluxes of MIDI down to 0.5 Jy (vs. 5 Jy without FSU-A) and 0.05 Jy (vs. 0.2 Jy without FSU-A) using the ATs and UTs, respectively. The K band visibilities could be measured with a precision down to ~2%.

Data Reduction and Early Science Calibration for FORCAST, A Mid-Infrared Camera for SOFIA

FORCAST is a mid-infrared (5–40 μm) facility instrument for the Stratospheric Observatory for Infrared Astronomy (SOFIA). After achieving first light flight in 2010 May, FORCAST has completed two observatory characterization flights and thirteen science flights on SOFIA. In this paper we describe the photometric calibration of FORCAST which involves some subtleties in correction for array artifacts and uncertainties due to the airborne environment. At present FORCAST is able to achieve approximately 20% (3σ) uncertainty in the calibration.