Microplastic Fibers Research Articles

Improving of an easy, effective and low-cost method for isolation of microplastic fibers collected in drying machines filters

Microplastic fibers have been found to be a dominant form of microplastics in water matrixes, and textile industry and domestic washing of synthetic textiles as one of its main sources. Additionally, there is a lack of knowlidge about microplastic fiber release during mechanically drying clothes and textiles due to differences in the isolation of microplastic fiber methods. Limited information available in the literature in terms of the isolation of microplastic fibers from organic-rich samples after using different household equipment represents one of the main challenges leading us to our main goal, to optimise an effective, simple, and low-cost method for the isolation of microplastic fibers from textile fibers of different origins without damaging their structure. This is achieved by primarily removing mineral matter by using density separation with a saturated solution of ZnCl2 followed by removal of organic matter by using hydrogen peroxide (H2O2) and FeCl3 as a catalyst. Identification of microplastic fibers was obtained by optical microscope, Fourier-transform infrared spectroscopy and Thermogravimetric analysis. Clear microscope (both optical and SEM) images, high percentage of obtained FTIR spectra overlap with Polymer Sample laboratory, clear TGA of isolated samples confirmed that this method can be used as a simple and effective method for isolation of microplastic fibers from organic components rich samples of different origin.

Effects of fibrous microplastics on the accumulation of tris(2,3-dibromopropyl) isocyanurate and behavior of zebrafish via water- and foodborne exposure routes

Fibrous microplastics are abundant in water, and the additives on fibers could also be transported jointly, which is a combined pollution scenario prevalent in the environment. Organisms ingest microplastics directly from the environment or indirectly through trophic transfer. However, there is a dearth of available information on the uptake and effects of fibers and their additives. This study investigated the uptake and depuration of polyester microplastic fibers (MFs, 3600 items/L) by adult female zebrafish via waterborne and foodborne exposure routes and the effects on the fish behavior. Moreover, we used brominated flame-retardant tris(2,3-dibromopropyl) isocyanurate (TBC, 5 μg/L) as a representative plastic additive compound and explored MFs' effects on the accumulation of TBC in zebrafish. Results substantiated that the highest MF concentrations in zebrafish from waterborne exposure (12.00 ± 4.59 items/tissue) were approximately three times higher than foodborne exposure, suggesting waterborne exposure as the primary ingestion route. In addition, environmentally relevant MF concentrations did not affect TBC bioaccumulation via aqueous exposure. However, MFs could decrease TBC accumulation via foodborne exposure by ingesting contaminated D. magna, which was probably because MF co-exposure decreased the TBC burden in daphnids. MF exposure also considerably increased behavioral hyperactivity in zebrafish. Moved speed, travelled distance, and active swimming duration all increased when exposed to MFs-containing groups. This phenomenon remained apparent in the foodborne exposure experiment with a low MF concentration (0.67–6.33 items/tissue) in zebrafish. This study offers a deeper understanding of MF uptake and excretion in zebrafish and the accumulation of the co-existing pollutant. We also confirmed that waterborne and foodborne exposure may lead to abnormal fish behavior even at low in vivo MF burdens.

Variability of prey preferences and uptake of anthropogenic particles by juvenile white seabream in a coastal lagoon nursery ground

Marine plastic litter, originating from land-based sources, enters the marine environment by passing through coastal ecosystems such as lagoons and estuaries. As early life history stages (ELHS) of many commercially important fish species rely on these transitional areas as nursery grounds, we hypothesized that they encounter a spatial gradient of habitat quality and pollution from inner to outer parts of their vital environment. With sizes < 5 mm, anthropogenic particles (AP), among them microplastic (MP) fibers and fragments, entail a high bioavailability for ELHS of fish, potentially facilitating AP uptake at early developmental stages which may have implications for their survival and growth. This study provides a contextualization baseline between feeding preferences and uptake of AP by the white seabream Diplodus sargus (Linnaeus, 1758) in an estuarine nursery ground on the southern coast of Portugal. Juvenile fish showed a generalized, omnivorous feeding mode with differences in trophic resource utilization between individuals collected at distinct seagrass meadows in the lagoon. A total of 23.13% of the fish (n = 147) were detected with AP in the gastrointestinal tract, and the mean number of AP per AP-feeding individual was 1.64 ± 1.04, with anthropogenic fibers (n = 47) occurring more frequently than fragments (n = 9). Knowledge of the underlying factors for MP ingestion will be greatly enhanced by considering environmental conditions along with species-stage and life-stage specific feeding modes and prey preferences which shape the uptake probability of anthropogenic fibers and fragments.

Identification of microplastic fibres released from COVID-19 test swabs with Raman imaging

BackgroundCOVID-19 pandemic is not yet over, and it has been generating lots of plastic wastes that become a big concern. To catch the virus, for example, no matter via antigen or PCR test, swab is generally used for sampling. Unfortunately, the swab tip is commonly made of plastics, and thus it can be a potential source of microplastics. This study aims to propose and optimise several Raman imaging to identify the microplastic fibres released from different COVID-19 test swabs.ResultsThe results show that Raman imaging can effectively identify and visualise the microplastic fibres released from the swabs. In the meantime, on the surface of the fibres, additives such as titanium oxide particles are also captured for some brands of swabs. To increase the result certainty, scanning electron microscope (SEM) is first employed to get the morphology of the released microplastic fibres, along with Energy-dispersive X-ray spectroscopy (EDS) to confirm the presence of titanium element. Then, Raman imaging is advanced to identify and visualise the microplastics and titanium oxide particles, from different characteristic peaks in the scanning spectrum matrix. To further increase the imaging certainty, these images can be merged and cross-checked using algorithms, or the raw data from the scanning spectrum matrix can be analysed and decoded via chemometrics, such as principal component analysis (PCA). Beyond the advantages, the disadvantages of the confocal Raman imaging (affected by focal height) and algorithms (non-supervised calculation) are also discussed and intentionally corrected. In brief, the imaging analysis (particularly the combined SEM with Raman) is recommended to avoid the possible result bias that might be generated from the single spectrum analysis at a selective but random position.ConclusionsOverall, the results indicate that Raman imaging can be a useful tool to detect microplastics. The results also send us a strong warning that, if we worry about the potential microplastics contamination, we should be cautious to select the suitable COVID-19 testing kits.

Synthetic Microfiber Material Influences Ingestion by Freshwater Worms.

Plastics enter the environment, amongst others, from synthetic textiles, which shed microplastic fibers (microfibers) during their production, use and disposal. We tested whether short- and long-term effects of microfibers on the aquatic worm, Lumbriculus variegatus, depend on the synthetic microfiber material. Microcosms containing L. variegatus were exposed to no microfibers (control) or one of three polymer treatments (nylon, polyester, or olefin) at 5g of microfibers kg-1 of sediment for 48h or 28 days. Following exposure, L. variegatus were counted, weighed, and the number of microfibers ingested determined. Polyester microfibers occurred in higher quantities (10-12) than nylon and olefin (< one) per individual after 48h and 28 days. Only the olefin per individual doubled after 28 days compared to 48h. These findings indicate that polyester microfibers are more likely to affect L. variegatus and have greater potential to be ingested by higher trophic levels than other polymers.

Screening for Microplastic Uptake in an Urbanized Freshwater Ecosystem: Chondrostoma nasus (Linnaeus, 1758) Case Study

The feeding characteristics of the nase, based on its mouth morphology and feeding behavior related to aquatic habitat substrata sediments make this fish a biological uptake vector for microplastics in freshwater ecosystems. Fibers may have limited absorption through the gastrointestinal tract therefore unlikely to be found in fish gastrointestinal tissue and muscle tissue. The presence of microplastic fibers in the gastrointestinal content is proof of how difficult it is for these fibers to become embedded in other organs. The absence of microplastic fibers in muscle tissue and gastrointestinal tissue is key information for microplastic fabrication and management in aquatic ecosystems. The majority of fish have relatively low levels of microplastics; however, a few individuals have a higher dose. This is true for all types of microplastics analyzed, with the exception of fish that had just one microplastic present in the analyzed matrix. The microplastics are not concentrated in the fish muscle tissue, gastrointestinal tissue and gastrointestinal content in relation to fish age, which may be due to their different mobility in the ecosystem, or due to the recent appearance of this type of contamination and the scale at which microplastics bioaccumulate. Such a relatively common fish species must be included in the assessment and monitoring systems of the Eurasian lotic systems. The risks involved include the transfer of the freshwater environments microplastics into human tissues via the food web of fishing species with the nase as a key basis.

The invasive red swamp crayfish (Procambarus clarkii) as a bioindicator of microplastic pollution: Insights from Lake Candia (northwestern Italy)

Microplastic pollution has become pervasive. Identifying a bioindicator species to track the occurrence and effects of microplastics (MPs) on ecosystems is crucial for determining their impact on the environment. The digestive tract of Procambarus clarkii was thought to be of interest for investigating MPs accumulation in freshwater organisms. Our hypothesis was that the same type of MPs found in abiotic compartments (water and sediment) could be found in P. clarkii, which would make it an ideal candidate for use as a bioindicator of MP pollution in freshwater ecosystems. Water, sediment, and P. clarkii specimens were collected from four sites in a lentic ecosystem (Lake Candia; northwestern Italy) for two consecutive years (2021–2022). The mean MPs abundance was 1.75 ± 0.95 items/m3 in 2021 and 2 ± 0.81 items/m3 in 2022 in the water samples and 6.75 ± 1.5 items/kg and 8 ± 0.81 items/kg in the sediment samples in 2021 and 2022, respectively. In 2021, the average was 0.06 ± 0.07 items/g in the males and 0.05 ± 0.05 items/g in the females; in 2022, the average was 0.04 ± 0.05 items/g and 0.05 ± 0.06 items/g in the males and the females, respectively. MP fibers and fragments (black, white, blue, light blue) of polypropylene and polyethylene terephthalate were found in the biotic and the abiotic compartments. The generalized linear mixed model revealed that the number of items/g was predicted only by total weight: the lowest number of items/g was recorded for crayfish with the highest weight probably due to the feeding habits of P. clarkii. Our findings suggest that the invasive P. clarkii (smaller individuals, in particular) could be a good candidate bioindicator for MP pollution since the same type of MP items were recorded in the abiotic compartments. Further research is needed to better understand the feeding behavior of P. clarkii and the dynamics of MPs in aquatic ecosystems.

Marine Biodegradability and Ecotoxicity of MWool® Recycled Wool Fibers: A Circular-Economy-Based Material

Pollution of the marine environment by microfibers is considered a problem for ecosystem conservation. The amount of microplastic, localization of sources, and associated ecotoxicity are well known in the literature. Wastewater from washing machines is the main source of microplastic fibers in the aquatic environment, and fabrics made from recycled plastic are widely reused. The circular economy also promotes recycling of dyed natural wool materials as a basis for making new clothing, but in this case, less research has been conducted on the behaviour and effects of recycled wool microfibers in marine ecosystems. MWool® (MW) and MWool® carded (MWc) products made from recycled wool fibers were tested in mesocosms to investigate the biodegradation of wool fibers over a 260-day period and the effects of this process on marine ecosystems in terms of microfiber inputs and the ecotoxicological effects of by-products and chemicals released during degradation. The early degradation process was associated with the loss of artificial pigments from the dyed wool, particularly pink and red, which occurred within 30–90 days of exposure. Mean release of microparticles into contact water is significantly different from control (T0, p &lt; 0.01) at 90 days MWc (36.6 mg/L) and 180 days MW (42.9 mg/L). The biodegradation process is accompanied by swelling of wool fibers, which is associated with a significant increase in mean wool thickness (p &lt; 0.05, 18.8 ± 2.1 µm at T0 vs. 24.0 ± 7.1 µm). In both cases, the contact water was not associated with signs of ecotoxicity for the marine species tested in this study (Phaeodactylum tricornutum, Brachionus plicatilis, and Paracentrotus lividus).

Long-term release kinetic characteristics of microplastic from commonly used masks into water under simulated natural environments

Masks-related microplastic pollution poses a new threat to the environment and human health that has gained increasing concern. However, the long-term release kinetics of microplastic from masks in aquatic environments have yet to studied, which hampers its risk assessment. Four types of masks, namely cotton mask, fashion mask, N95 mask, and disposable surgical mask were exposed to systematically simulated natural water environments to determine the time-dependent microplastic release characteristics at 3, 6, 9, and 12 months, respectively. In addition, the structure changes of employed masks were examined by scanning electron microscopy. Moreover, Fourier transform infrared spectroscopy was applied to analyze the chemical composition and groups of released microplastic fibers. Our results showed that the simulated natural water environment could degrade four types of masks and continuously produce microplastic fibers/fragments in a time-dependent manner. The dominant size of released particles/fibers was below 20 μm across four types of face masks. The physical structure of all four masks was damaged to varying degrees concomitant with photo-oxidation reaction. Collectively, we characterized the long-term release kinetics of microplastic from four types of commonly used masks under a well-mimic real word water environment. Our findings suggest that urgent action must be taken to properly manage disposable masks and ultimately limit the health threats associated with discarded masks.

Composition and distribution of hyporheic and macrobenthic fauna in a Neotropical mountain river, Colombia

This study examined the composition and diversity of the invertebrate communities that inhabit the hyporheic zone (HZ) in the upper and lower basins of the Dagua River, a tropical mountain stream, and their relationship with the macrobenthic fauna. In the HZ, different taxa were collected, many of which have been reported in several regions worldwide, suggesting that the biodiversity of the hyporheic community in Colombian rivers may be high. Although the hyporheic and macrobenthic fauna shared a moderate percentage (&gt; 50 %) of taxa, their ecological structures were different. The analysis of hyporheic filtrate water showed the presence of microplastic (MP) fibers as well as fauna, a condition that, based on the literature review, could represent a risk for the normal functioning of this river ecosystem.

First Evidence of Microplastic Occurrence in the Marine and Freshwater Environments in a Remote Polar Region of the Kola Peninsula and a Correlation with Human Presence

Microplastics (MPs) have even been detected in remote environments, including high-latitude regions, where human activities are restricted or strongly limited. We investigated the surface water of the bays of the Barents Sea and the freshwater lakes that are located close to and several kilometers from a year-round resident field station in the remote tundra region of the Kola Peninsula. The microplastics' presence in aquatic environments in this region has not been indicated yet. Microplastics were detected in all samples collected from the Barents Sea (<4800 items·m-3) and the lakes (<3900 items·m-3). Fibers made from polyethylene terephthalate (PET)-the most common thermoplastic polymer of the polyester family-and semi-synthetic cellulosic rayon were the most dominant. This indicated that the source of fiber contamination may come from protective clothes, ropes, ship equipment, and fishing nets. Small microplastics can spread through current and atmospheric transport. The Norwegian Current is likely responsible for the lack of correlations found between MP contamination and the distance from the field station between the studied bays of the Barents Sea. On the contrary, a significant correlation with human presence was observed in the concentration of microfibers in the water of the tundra lakes. The number of MP fibers decreased with an increase in the distance from the field station. This is the first study, to the best of our knowledge, that reports such a correlation in a remote region. We also discuss implications for animals. Our results show that even the most isolated ecosystems are not free from microplastic pollution.

Baseline assessment of microplastics in commercially important marine bivalves from New York, U.S.A.

Microplastic (MP) contamination in bivalve mollusks has become a significant concern over the last few years. These ecologically and economically valuable species are popular seafood items for human consumption. As filter feeders, bivalves may ingest MPs in their bodies, possibly impacting their physiology and fitness. Additionally, a considerable amount of the seafood that humans consume comes from coastal areas where MP concentrations tend to be the highest. This research provides the first examination of MPs in eastern oysters (Crassostrea virginica) and hard clams (Mercenaria mercenaria) that were grown locally in coastal areas of New York, contributing to a baseline for the northeast and mid-Atlantic regions of the U.S. A total of 48 eastern oysters (n = 12 per site, at four sites) and hard clams (n = 24 per site, at two sites) were sampled in summer 2021. While MP fibers and fragments (i.e. polyethylene terephthalate, polystyrene, and polypropylene) were found in some oysters, other contaminants (e.g. indigo dye, phthalocyanine, dye 823, etc.) were found in both bivalve species. Particle composition was verified using Raman microspectroscopy. Although mean MP concentrations were low in eastern oysters (i.e. 0.008 MPs g−1 of soft tissue wet weight; 0.125 MPs ind−1) and not found in hard clams, more research is needed to assess the magnitude of contamination in these edible bivalves.

Analysis of selective fluorescence for the characterization of microplastic fibers: Use of a Nile Red-based analytical method to compare between natural and synthetic fibers.

The scientific community has been focusing on studying and understanding the extent of damage caused by microplastics (MPs) to flora, fauna, and humans, including the environmental and health risks associated with them. MPs with different morphologies have been described in different environments, with fibers being the most common type regardless of the environment. Various methods have been used to analyze MPs. Analytical methodologies such as visual inspection, spectroscopic methods, and others currently used to study MPs are time-consuming, and only subjective results are obtained when these methods are used for sample analysis. Researchers have used various dyes, such as Nile Red (NR), a selective fluorescent stain, to differentiate the polymers from the other sample components and address these problems. Using such dyes helps distinguish polymer particles from other contaminants present in the samples. We aimed to study the analytical process, morphology, and wettability of synthetic (such as polyethylene and polypropylene) and natural (such as linen and cotton) fibers using NR to characterize the fibers. The fibers were fragmented manually, and the samples were prepared using a cryomicrotome. The prepared samples were subjected to different NR incubation times of 30min, 24h, and 168h, and characterized under ultraviolet light using optical microscopy. We investigated the effect of NR on different fibers, and the samples selection using the fluorescence properties generated when the fibers adsorbed the NR dye. The wettabilities of the samples indicated that polyethylene and polypropylene were hydrophobic, while linen and cotton were hydrophilic. Both synthetic and natural fibers exhibited fluorescence properties in the presence of NR. This increased the complexity of executing the MP characterization process, indicating that combined methodologies and optical and chemical identification processes should be used to characterize plastic specimens efficiently. We summarize and discuss the results and findings and provide recommendations for future laboratory research on microplastic fibers focusing on (I) microplastic selection, (II) stain preparation, and (III) microplastic characterization.

Formation of Nano- and Microplastics and Dissolved Chemicals During Photodegradation of Polyester Base Fabrics with Polyurethane Coating.

Polyurethane (PU) synthetic leathers possess an intricate plastic composition, including polyester (PET) base fabrics and upper PU resin, but the release of fragments from the complexes is unclear. Therefore, we investigated the photodegradation trends of PET base fabrics with PU coating (PET-U) as a representative of composite plastics. Attention was paid to the comparison of the photoaging process of PET-U with that of pure PET base fabric (PET-P). To reveal the potential for chain scission, physical and chemical changes (e.g., surface morphology, molecular weight, and crystallinity) of the two fabrics were explored. The generation of microplastic fibers (MPFs) and microplastic particles (MPPs) was distinguished. Compared with PET-P, PET-U showed a similar but delayed trend in various characteristics and debris release rate as the photoaging time prolonged. Even so, after 360 h of illumination, the generated number of MPs (including MPFs and MPPs) rose considerably to 9.32 × 107 MPs/g, and the amount of released nanoplastics (NPs) increased to 2.70 × 1011 NPs/g from PET-U. The suppression of MP formation from PET-U was potentially directed by the physical shielding of the upper PU layer and the dropped MPs, which resisted the photochemical radical effect. The components of dissolved organic matter derived from plastics (P-DOM) were separated by molecular weight using a size-exclusion chromatography-diode array detector-organic carbon detector/organic nitrogen detector (SEC-DAD-OCD/OND), and the results showed that a larger amount of carbon- and nitrogen-containing chemical substances were generated in PET-U, accompanied by more aromatic and fluorescent compounds. The results provided theoretical bases and insights for future research on the risks of plastic debris from PU synthetic leathers on aquatic organisms and indicated feasible directions for exploring combined pollution studies of plastics.

Process-oriented impacts of microplastic fibers on behavior and histology of fish

Microplastic pollution has raised global concern for its hazards to biota. To determine the direct impact of microplastics during their contact with fish, we exposed goldfish (Carassius auratus) to 100 and 1000 items/L waterborne microplastic fibers in the short- and long-term. In the presence of 1000 items/L of microplastic fibers, the coughing behavior of fish increased significantly after 2 h of exposure. Predatory behaviors decreased significantly by 53.0% after 45 d of exposure, and the reduction in daily food intake was negatively related to exposure duration in the 1000 items/L group. In addition, microplastic fibers stimulated dynamic mucus secretion across different fish tissues during the different processes evaluated in this study, with 30.0% and 62.9% overall increases in the secretory capacity of mucus cells in the 100 and 1000 items/L groups, respectively. These behavioral and histological alterations were derived from the ventilation, feeding, and swimming processes of goldfish. We regarded these changes as process-oriented impacts, suggesting the effects of microplastics on fish and how fish cope with microplastics.

Baseline concentration of microplastics in surface water and sediment of the northern branches of the Mekong River Delta, Vietnam

The Mekong River Delta in Vietnam, is concerned by numerous microplastic-related issues such as a lack of wastewater treatment facilities and mismanagement of plastic waste released from agriculture, aquaculture and related activities. This study aimed to examine the presence of microplastics in surface water and sediment by collecting samples from six sites along the Tien River and its distributaries in February 2019. The results showed that the average concentration of microplastics over the entire area was 53.8 ± 140.7 items m−3 in surface water and 6.0 ± 2.0 items g−1 dried weight in sediment, with a predominance of microplastic fibres rather than fragments, respectively 85 % and 98 % in surface water and sediment. In the main flow of surface water, the concentration of microplastics was stable; however, in the sediment, microplastic concentration was affected by the high dynamic flow regime rather than the sources where microplastics are released.

Microplastics incorporated by honeybees from food are transferred to honey, wax and larvae

Microplastics (MP) are ubiquitous in the environment, and there is little information available on their impact on terrestrial organisms. Their effect on insects and particularly on honeybees is relevant, given the prevalence of these organisms in the environment and the fact that they provide key ecosystem services. We conducted a field study to assess (1) the fate of these ingested MP within the hive, and (2) MP effect on Apis mellifera population growth during chronic exposure. We aimed to determine if MP ingested by honeybees are incorporated into hive matrices, including honey, and their effect on colony development and honey reserves. We fed beehives with sucrose solutions treated or untreated with 50 mg of Polyester microfibers/L for one month. Microplastic fibers (MF) from treated syrup were incorporated by adult worker bees, remaining in their cuticle, digestive tract, larvae, honey, and wax. Most of the MF were accumulated in wax showing that honey remains as a safe food. At the end of the experiment, no differences in honey reserves or bee population were observed. This is the first study to evaluate in the field the effects and dynamics of MP inside honeybee hives. Our results showed that bees can incorporate MP from the environment and deliver them into the different matrices of the hive. Concentration of MF found in honey of treated hives was like that found in commercial honey, suggesting that honeybees might be exposed to similar MP contamination levels in the environment compared to our experiment. Finally, our results highlight a way in which MP might enter the food chain, with direct implication for human health.

Characterization of fiber fragments released from polyester textiles during UV weathering

Synthetic textiles are considered a prime source of microplastics fibers which are a prevalent shape of microplastic pollution. Whilst the release mechanisms and formation of such microplastic fibers have been so far mainly studied in connection with laundry washing, there are some studies emerging that describe also other release pathways for microplastic fibers such as abrasion during wearing. The aim of this study was to consider weathering as another process contributing to the formation of microplastic fibers and their presence in the environment. Four types of polyester fabrics were selected and exposed to artificial weathering by UV-light for two months. The fabrics were extracted every 15 days to quantify and characterize the formed microplastics. Microplastic fibers with the diameter matching the size of the fibers in the textiles were observed. However, additional microplastic fibers of different shapes were also formed. These included partially broken fibers, thin fibers with a diameter below the size of the fiber in the fabrics, fibers flattened into a ribbon, and non-fibrous microplastics. The released microplastics evinced physical alterations on their surface in the form of pits and cracks. The released microplastics exhibited a steep increase in number with progressing weathering; from hundreds of fibers per gram of textile from unaged fabrics, to hundred thousands fibers (150,000-450,000 MPF/g) after 2 months of weathering. Additional 10,000-52,000 unfibrous microplastics/g were released from the weathered fabrics. While plain fabrics showed higher releases than interlock and fleece, further research is needed to evaluate the importance of the textile architecture on the weathering process in comparison with the production history of the fabrics. Based on a comparison with washing studies with the same textiles, we can estimate that the potential of weathered fabrics to be a source of microplastic fibers can be 20-40 times larger than washing only.

Microplastic Fiber Release by Laundry: A Comparative Study of Hand-Washing and Machine-Washing

Microplastic fiber (MPF) shed during textile washing is one of the important sources of microplastics in the aquatic environment. There have been many studies on MPF release by machine-washing of textiles. However, traditional hand-washing still remains very common in many regions around the world. To date, MPF release from hand-washing remains to be less studied and understood. In this study, we examined its release characteristics as a function of various factors. Besides, we also evaluated a machine-washing experiment to compare the differences in MPF release by these two washing modes. The experimental results indicated that the mean fiber length of MPFs by hand-washing (258 μm) was generally longer than those by machine-washing (155 μm); the mean numbers of MPFs released from the hand-washing and machine-washing were 1853 and 23,723 n/piece, and their corresponding mean mass of MPFs were 37.84 and 222.84 mg fiber/kg textile. Moreover, the MPF initially decreased in number and mass and then stabilized gradually with sequential washings. Among all of the variables tested, temperature, detergent type, washing time, and water volume have no significant effect on MPF release, while the use of detergent (<1.5 g/L), soaking time (<2 h), and the use of washboard increase MPF release.

SPECTROSCOPIC ANALYSIS OF MICROPLASTIC FIBERS RELEASED DURING LAUNDRY WASHING CYCLE

Modern life and contemporary materials have brought ubiquitous microplastic particles into our surroundings. Many researchers have focused their research towards investigating sources, pathways, toxic effects and mitigation possibilities of microplastic pollution. One of the most abundant types of microplastics is microplastic fibers, mainly released from synthetic clothes. This study investigates the possibility of identifying microplastic fibers released from textiles during the laundry washing cycle by Fourier-transform infrared spectroscopy (FTIR). Microplastic fibers released from some types of synthetic clothes during the laundry washing cycle at 40°C were collected and analyzed. Thanks to FTIR spectroscopy, it has been proven that a certain amount of microplastics is separated every time synthetics are washed.