Micelle-like Structure Research Articles

Efficient simultaneous removal of heavy metals and polychlorobiphenyls from a polluted industrial site by washing the soil with natural humic surfactants

We evaluated the effectiveness of natural organic surfactants such as humic acids (HA) from lignite to simultaneously wash heavy metals (HM) and polychlorobiphenyls (PCB) from a heavily contaminated industrial soil of northern Italy. Supramolecular HA promote in solution a micelle-like structure, where recalcitrant apolar organic xenobiotics are repartitioned from surfaces of soil particles during soil washing process. Concomitantly, the HA acidic functional groups enable a simultaneous complexation of HM. A single soil washing with HA removed 68 and 75% of PCB congeners for 1:1 and 10:1 solution/soil ratios, respectively. The same HA washing simultaneously and efficiently removed a cumulative average of 47% of total HM, with a maximum of 57 and 67% for Hg and Cu, respectively. We showed that washing a highly polluted soil with HA solution not only is an effective and rapid soil remediation technique but also simultaneously removes both HM and persistent organic pollutants (POP). Soil washing by humic biosurfactants is also a sustainable and eco-friendly technology, since, contrary to synthetic surfactants and solvents used in conventional washing techniques, it preserves soil biodiversity, promotes natural attenuation of unextracted POP, and accelerates further soil reclamation techniques such as bio- or phytoremediation.

Constructing hydrophobic protection for ionic interactions toward water, acid, and base-resistant self-healing elastomers and electronic devices

Dynamically crosslinked materials generally lose their self-healing ability and mechanical robustness in aqueous, acidic, and basic environments due to disruption of their dynamic interactions and bonds. Herein, a micelle-like structure with a hydrophobic outer layer is used to protect ionic interactions. This structure ensures the self-healing and long-term stability of the ionically crosslinked elastomers in aqueous, acidic, and basic environments. The elastomer possesses a tensile strength of 6.7 MPa and a strain at break of 1400%, which is superior to the existing waterproof self-healing elastomers. The strain sensors and dielectric actuators based on the elastomer are highly stable and self-healable, even in extremely harsh environments. This design strategy of hydrophobic protection for dynamic interactions is quite general, allowing it to be extended to other self-healing materials.

Anions of Ionic Liquids Are Important Players in the Rescue of DNA Damage.

The non-targeted action of fungicides generates genotoxic effect in vertebrates by perturbing the structure of DNA, which impacts its replication and transcriptional process, leading to several serious gene associated diseases. Hence, finding a suitable medium that can reduce/reverse the structural perturbation of DNA induced by fungicide, viz. dodine, is essential. Spectroscopic as well as molecular dynamics simulation techniques have been implemented to understand the effect of ionic liquids (ILs) having a tetramethylguanidinium cation along with short and long hydrophobic chain anions mixed with fungicide. The addition of ILs possessing anions with long hydrophobic chain blocks the fungicide from binding in the groove region of DNA by forming micelle-like structure and reverses the structural change induced by the fungicide. The hydrophobicity of long hydrocarbon and fluorocarbon chains of anions is a key parameter for reversing the effect of fungicide as small anion based ILs are incapable of annulling the structural change of DNA.

Self-assembly of tubuliform spidroins driven by hydrophobic interactions among terminal domains

Spider silk has remarkable physical and biocompatible properties. Investigation of structure-function relationship and self-assembly process of spidroins is necessary for uncovering the mechanism of silk fiber formation. Nevertheless, how the terminal domains initiate self-assembly of soluble tubuliform spidroins to form solid eggcase silk is still not fully understood. Here we investigate the roles of both terminal domains of tubuliform spidroin 1 (TuSp1) in the silk fiber formation. We found that interactions among the terminal domains drive rapid TuSp1 self-assembly and fiber formation, which is insensitive to pH changes from 6.0 to 7.0. These interactions also contribute to the spidroin chain alignment in fiber formation upon shear-force exposure. Structural analysis and site-directed mutagenesis identified eight critical surface-exposed residues involved in hydrophobic interactions among terminal domains. Spidroins with single-point mutations of these residues fail to form intermediate micelle-like structures. The structural docking model indicates that multiple terminal domains of TuSp1 may interact with each other based on hydrophobic interactions and surface complementarity, which may lead to forming the surface of the micelle-like structure. Our results provide new insights into the structural mechanism of eggcase silk formation and the basis for designing and producing novel biomaterials derived from spider eggcase silk.

Interfacial properties and micellization of triblock poly(ethylene glycol)-poly(ε-caprolactone)-polyethyleneimine copolymers

This study aimed to explore the link between block copolymers’ interfacial properties and nanoscale carrier formation and found out the influence of length ratio on these characters to optimize drug delivery system. A library of diblock copolymers of PEG-PCL and triblock copolymers with additional PEI (PEG-PCL-PEI) were synthesized. Subsequently, a systematic isothermal investigation was performed to explore molecular arrangements of copolymers at air/water interface. Then, structural properties and drug encapsulation in self-assembly were investigated with DLS, SLS and TEM. We found the additional hydrogen bond in the PEG-PCL-PEI contributes to film stability upon the hydrophobic interaction compared with PEG-PCL. PEG-PCL-PEI assemble into smaller micelle-like (such as PEG-PCL4006-PEI) or particle-like structure (such as PEG-PCL8636-PEI) determined by their hydrophilic and hydrophobic block ratio. The distinct structural architectures of copolymer are consistent between interface and self-assembly. Despite the disparity of constituent ratio, we discovered the arrangement of both chains guarantees balanced hydrophilic–hydrophobic ratio in self-assembly to form stable construction. Meanwhile, the structural differences were found to have significant influence on model drugs incorporation including docetaxel and siRNA. Taken together, these findings indicate the correlation between molecular arrangement and self-assembly and inspire us to tune block compositions to achieve desired nanostructure and drug loading.

Effects of molecular weight and structural conformation of multivalent-based elastin-like polypeptides on tumor accumulation and tissue biodistribution.

In order to improve clinical outcomes for novel drug delivery systems, distinct optimization of size, shape, multifunctionality, and site-specificity are of utmost importance. In this study, we designed various multivalent elastin-like polypeptide (ELP)-based tumor-targeting polymers in which multiple copies of IL-4 receptor (IL-4R)-targeting ligand (AP1 peptide) were periodically incorporated into the ELP polymer backbone to enhance the affinity and avidity towards tumor cells expressing high levels of IL-4R. Several ELPs with different molecular sizes and structures ranging from unimer to micelle-forming polymers were evaluated for their tumor accumulation as well as in vivo bio-distribution patterns. Different percentages of cell binding and uptake were detected corresponding to polymer size, number of targeting peptides, or unimer versus micelle structure. As compared to low molecular weight polypeptides, high molecular weight AP1-ELP showed superior binding activity with faster entry and efficient processing in the IL-4R-dependent endocytic pathway. In addition, in vivo studies revealed that the high molecular weight micelle-forming AP1-ELPs (A86 and A100) displayed better tumor penetration and extensive retention in tumor tissue along with reduced non-specific accumulation in vital organs, when compared to low molecular weight non-micelle forming AP1-ELPs. It is suggested that the superior binding activities shown by A86 and A100 may depend on the multiple presentation of ligands upon transition to a micelle-like structure rather than a larger molecular weight. Thus, this study has significance in elucidating the different patterns underlying unimer and micelle-forming ELP-mediated tumor targeting as well as the in vivo biodistribution.

Controlled release behavior of curcumin from kappa-carrageenan gels with flexible texture by the addition of metal chlorides

Previously, we had greatly enhanced the solubility of the widely studied polyphenol curcumin using the tri-component system curcumin/α-glucosyl stevia/polyvinylpyrrolidone. This study aimed to develop a κ-carrageenan gel formulation with a controlled release profile of curcumin by changing the texture properties of the gel. The tri-component system with/without metal chlorides maintained the high solubility of curcumin after five cycles of heating-cooling operations through the interaction between the α-glucosyl stevia micelle-like structure and polyvinylpyrrolidone. The release rate of curcumin in the κ-carrageenan gel formulations was altered by adding metal chlorides. Particularly, changing the concentration of potassium chloride allowed for flexible release of curcumin. Importantly, the κ-carrageenan gel formulation maintained the enhanced solubility of hydrophobic polyphenols, which shows potential for ensuring flexible curcumin-release rates, by changing the texture properties of the gel using metal chlorides. The controlled release rate of curcumin may lead to improved outcomes by prolonging the antioxidant and anti-inflammatory effects of the curcumin in the field of health care.

Silver Nanoparticle Surface Enabled Self-Assembly of Organic Dye Molecules.

Fluorescence titration of methylene blue, rhodamine B and rhodamine 6G (R6G) by silver nanoparticle (AgNP) all resulted in an initial steep quenching curve followed with a sharp turn and a much flatter quenching curve. At the turn, there are about 200,000 dye molecules per a single AgNP, signifying self-assembly of approximately 36-layers of dye molecules on the surface of the AgNP to form a micelle-like structure. These fluorescence-quenching curves fit to a mathematical model with an exponential term due to molecular self-assembly on AgNP surface, or we termed it “self-assembly shielding effect”, and a Stern-Volmer term (nanoparticle surface enhanced quenching). Such a “super-quenching” by AgNP can only be attributed to “pre-concentration” of the dye molecules on the nanoparticle surface that yields the formation of micelle-like self-assembly, resulting in great fluorescence quenching. Overall, the fluorescence quenching titration reveals three different types of interactions of dye molecules on AgNP surface: 1) self-assembly (methylene blue, rhodamine B and R6G), 2) absorption/tight interaction (tryptamine and fluorescein), and 3) loose interaction (eosin Y). We attribute the formation of micelle-like self-assembly of these three dye molecules on AgNP to their positive charge, possession of nitrogen atoms, and with relatively large and flat aromatic moieties.

Self-Assembly of Amphiphilic Amylose Derivatives in Aqueous Media.

Six amylose derivative (C12CMA) samples with hydrophobic dodecyl ether groups and hydrophilic sodium carboxymethyl groups were synthesized from an enzymatically synthesized amylose for which the weight-average molar mass is 50 kg mol-1 to realize amylose-based amphiphilic polymer micelles. The degree of substitution of hydrophobic (DSC12) and hydrophilic (DSCM) groups ranges between 0.076 and 0.39 and between 0.35 and 1.83, respectively. Static and dynamic light scattering, small-angle X-ray scattering (SAXS), and fluorescence measurements with pyrene as a probe were carried out for the samples in 150 mM aqueous NaCl to characterize the higher-order structure in solution. The fluorescence from pyrene showed that all six samples have hydrophobic environment, while the hydrophobicity tends to increase with rising DSC12. All six samples have high scattering intensity owing to the relatively large concentrated droplets ranging in the hydrodynamic radius from 50 to 110 nm, whereas the weight fraction of such large particles is substantially small except for the highest DSC12 sample. Most polymer chains for relatively low DSC12 of 0.076 were molecularly dispersed with a very small amount of large droplets. The dispersed chain has a slightly smaller helix pitch per residue and a more rigid main chain than those for amylose in dimethyl sulfoxide, suggesting that the amylosic main chain of C12CMA has a helical structure with dodecyl groups at least locally. On the other hand, an anisotropic shaped micelle-like structure is only found for relatively high DSC12 (0.23 and 0.39) samples, which was detected by the SAXS profile at a high scattering vector range. The micelle structure for high DSC12 samples is consistent with the high chain stiffness.

Ex situ soil washing of highly contaminated silt loam soil using core-crosslinked amphiphilic polymer nanoparticles

Non-ionic surfactants (Triton X-100 and Brij 30) and core-crosslinked amphiphilic polymer (CCAP) nanoparticles were used as extractants in the ex situ soil washing of silt loam soil contaminated with large quantities of petroleum oil, and their soil-washing performances were compared. Following washing with the surfactants, highly turbid aqueous solutions containing large numbers of soil and petroleum oil particles were produced. In contrast, the CCAP nanoparticles successfully extracted the petroleum oils from the soil samples without the formation of such a turbid aqueous solution. In addition, the CCAP nanoparticles extracted 96% of the petroleum oils, which is a significantly larger quantity than that by Brij 30 and Triton X-100 under equivalent conditions. Indeed, owing to their crosslinked micelle-like structure, the CCAP nanoparticles maintained their nanostructure even upon contact with a highly contaminated silt loam soil matrix, thereby resulting in the extraction of only the hydrophobic oily contaminants from the soil matrix and avoiding the formation of dispersions of soil particles and hydrophobic contaminants. As such, CCAP nanoparticles could be considered as suitable washing materials for highly contaminated silt loam soils.

Interplay between Amphiphilic Stabilizers and Cholesterol in the Stabilization of Itraconazole Nanoparticles Prepared by Flash Nanoprecipitation.

While flash nanoprecipitation (FNP) has proven to be an extremely rapid and highly efficient nanoparticle fabrication process for hydrophobic drugs, physical instability associated with nonequilibrium molecular orientation of amphiphilic stabilizers (ASs) in nanoparticles remains a major snag in the general application of this nanotechnology, particularly for a drug with ACDLog P in the range of ∼2-9. This study was aimed at elucidating the costabilizing role of cholesterol (CLT) in the FNP of AS-stabilized nanoparticles of itraconazole (ITZ), a model drug with an ACDLog P of 4.35 ± 1.22 and log P of 5.66. The presence of CLT was shown to reduce the initial particle size and markedly improve the short-term storage stability of ITZ nanoparticles. The stability-enhancement by CLT can be linked to its higher miscibility or stronger interaction with the AS hydrophobic moiety than with ITZ (as reflected by the absolute differences of their solubility parameter values). Surface analyses employing X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) suggest that, through the coprecipitation of CLT with ITZ to form a mixed hydrophobic drug core, the CLT molecules that are exposed on the core surface serve to afford a stronger and more timely surface anchorage of the AS hydrophobic moieties, thereby facilitating the rearrangement of AS molecules toward the stable micelle-like structure. The present findings offer a mechanistic insight into the interplay between amphiphilic stabilizer and costabilizer in enhancing the physical stability of drug nanoparticles and may carry important implications for the development of more stable and efficacious nanoparticle therapeutics.

286 - Pegylated manganese protoporphyrin self-assembles into nanoparticles in aqueous media and exerts potent catalase-mimic activity to protect oxidative cellular damages

Certain types of metalloporphyrin derivatives have been studied their therapeutic potentials against oxidative stress related diseases according to their catalase-mimic activities. Here we describe the synthesis, physicochemical properties, and catalase-like activity of polyethylene glycol (PEG) conjugated manganese protoporphyrin (PEG-MnPP). Carboxyl groups of protoporphyrin ring at C6 and C7 positions were first activated by ethyl chloroformate, followed by reacting with tert-butoxycarbonyl (Boc)-ethylenediamine. Boc moieties were then removed to introduce amino groups onto protoporphyrin structure. To the amino groups were conjugated with succinimidyl PEG having average molecular weight of 2000 to obtain pegylated protoporphyrin (PEG-PP). Manganese was chelated into protoporphyrin ring to synthesize PEG-MnPP by incubating PEG-PP and manganese acetate in methanol. PEG-MnPP was highly water-soluble; the saturated concentration of PEG-MnPP in water was determined to be approximately 3 mM. Dynamic light scattering and fluorescent spectrometry analyses revealed that PEG-MnPP self-assembled into nanoparticles with micelle-like structure consisting of hydrophobic MnPP core surrounded by hydrophilic PEG chains in aqueous media having apparent molecular size of 400 nm in a diameter. PEG-MnPP can effectively eliminate hydrogen peroxide from culture media and protected mammalian cultured cells from toxic insults induced by hydrogen peroxide exposure. Intravenous administration of PEG-MnPP reduced liver injury of mice treated with acetaminophen. These data warrant further study to explore therapeutic potential of PEG-MnPP as water-soluble metalloporphyrin-based catalase mimic to oxidative stress associated diseases.

Modular Assembly of a Conserved Repetitive Sequence in the Spider Eggcase Silk: From Gene to Fiber.

Spider silk features extraordinary toughness in combination with great biocompatibility and biodegradability, fascinating researchers to prepare artificial silk fibers inspired from the natural art of spinning. In addition to C- and N-terminal domain, a repeat unit from Lactrodectus mactans spider eggcase silks displays substantial sequence conservation across species. Herein, we attempt to spin the engineered tubuliform spidroin 1 (eTuSp1) by microfluidics in a mode of modular assembly comprising the genetic construction, micellar formation, phase separation, and further solidification. Based on the conserved gene sequence, a unique amphiphilic behavior was predicted and then verified by combined techniques of dynamic light scattering, transmission electron microscopy, and synchrotron radiation X-ray diffraction to reveal the formation of micelle-like structure. Through the employ of biomimetic microfluidic devices, desolvation of eTuSp1 was simplified by the nonsolvent induced phase separation in place of the conventional ions exchange and acidification. Both controlled by protein concentrations and flow rate ratios, silk fibers were assembled similar to these reported in other studies of spheres/spherical aggregates observed as intermediates. Because of the applied shear and elongational flow in microfluidic systems, these intermediates were forced to form fibrillar assemblies accompanied by the conformational transformation from α-helix to β-sheet. The resultant mechanical properties were investigated in response to the change of secondary structures and morphologies during spinning process. This work studies the sequence-structure-property relationship, providing comprehensive and systematic insight into the design rational on the preparation of artificial silk fibers from microscale to macroscale.

Impact of molecular rearrangement of amphiphilic stabilizers on physical stability of itraconazole nanoparticles prepared by flash nanoprecipitation

Flash nanoprecipitation (FNP) is a controlled antisolvent precipitation process that has proven effective for consistent production of drug nanoparticles with a defined mean particle size and narrow particle size distribution. However, physical instability of the generated nanoparticles remains a major challenge in the application of this technology in pharmaceutical formulation. Aimed at resolving this problem, the present study has investigated the FNP process and associated stabilization mechanism of itraconazole (ITZ) nanoparticles through in-depth nanoparticle characterization. Results showed that ITZ nanoparticles could be reproducibly produced with a mean particle size <100 nm and a polydispersity index <0.2 in the presence of amphiphilic stabilizers (ASs). Surface analysis of freshly formed nanoparticles by X-ray photoelectron spectroscopy (XPS) revealed initially a disordered packing structure and subsequently a time-dependent molecular rearrangement of incorporated AS towards a micelle-like structure. The faster the molecular rearrangement of AS, the more stable the nanoparticles, as monitored by the change in particle size with time. These findings may have important implications for the selection of effective ASs for formulating stable drug nanoparticles. The present study is the first of its kind to demonstrate the utility of XPS to track the molecular transport of stabilizers in rapidly generated nanoparticles.

A Molecular Level Understanding of Template Effects in Ionic Liquids

The structure-directing or template effect has been invoked several times for ionic liquids to explain the different outcome in material synthesis, namely, different scaffolds or geometrical arrangements with varying ionic liquids. It is obvious to assume that such an effect can originate from the most likely complex microstructure, being present within the ionic liquid itself. In that regard, ionic liquids have already been shown to undergo a nanosegregation into polar and nonpolar phases, which is commonly known and denoted as microheterogeneity. In order to provide detailed insight on the molecular level and to understand the effects rising from this structuring, we performed molecular dynamics simulations on selected very simple model systems composed of 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, considering ethyl, butyl, hexyl, and octyl side chains attached to the cations, mixed with either n-dodecanol or n-butanol. By analyzing snapshots of the simulation boxes and calculating spatial distribution functions, we can visualize that with increasing side chains, the systems show considerable nanosegregation into polar and nonpolar domains. Combined angular and distance distribution functions show that in case of the nanosegregating systems the side chains of the cations are preferentially arranged in a parallel fashion, which indicates a micelle-like structure for the ionic liquids. The alcohol molecules participate in and are, therefore, influenced by this microheterogeneity. It can be shown that in the case of the short IL alkyl side chains, the self-aggregation of the nonpolar units of the alcohols is much stronger, while for the long chain cations, the nonpolar entities of the alcohols are most often connected to the nonpolar units of the ionic liquids. Using our domain analysis tool, we can quantify these observations by tracking the number, size, and shape of the polar and nonpolar entities present in the different investigated systems. The aforementioned combined angular-distance distribution functions reveal a structure-directing effect of the ionic liquids on the alcohol molecules within our simple model systems. The ionic liquids act as template and order the alcohol molecules according to their own structure, resulting in a parallel alignment of the alkyl side chains of the alcohols and ionic liquid cations, with both polar groups being at the same side. These observations show that the microheterogeneous structure of ionic liquids can indeed be applied to order substrates with respect to each other or, for example, to catalysts in a predetermined fashion, opening new possibilities for explaining or enhancing selectivities of chemical reactions in ionic liquids.

Synthesis of poly(fluorenyl-alt-p-phenyleneethynylene) with pendent carboxyl acid group and the sensing application

The present work focuses on the hydrophobic functionalization of water soluble celluloses methyl cellulose, hydroxyethyl cellulose and (hydroxypropyl)methyl cellulose with the anticancer steroid diosgenin, and two synthetic brassinosteroids (DI31 and S7) used as agrochemicals. Fourier transform infrared (FT-IR) and nuclear magnetic resonance (NMR) spectroscopies confirmed the cellulose modification. Prepared amphiphilic steroid-cellulose conjugates can self-assemble in water as stable and almost neutral particles with micelle-like structure, as depicted using dynamic light scattering. Whereas scanning and transmission electron microscopies showed 50–300 nm almost spherical particles and aggregates in dried state, atomic force microscopy assessed particles aggregates with mean sizes of 220–355 nm. These cellulose particles showed sustained steroid release in acidic aqueous medium over 72 h, and good stimulatory agrochemical activity in radish cotyledons assay. Thus, the outlined synthesis of steroid-cellulose conjugates, which would be capable to form self-assembled particles in water for controlled release of agrochemicals, is envisioned as a promising strategy.

Micelles of the chiral biocompatible surfactant (1R,2S)-dodecyl(2-hydroxy-1-methyl-2-phenylethyl)dimethylammonium bromide (DMEB): molecular dynamics and fragmentation patterns in the gas phase.

The study of self-assembly processes of surfactant molecules in the gas phase is of great interest for several theoretical and technological reasons related to their possible exploitation as drug carriers, protein shields and cleaning agents in the gas phase. The stability and fragmentation patterns of singly and multiply charged (either positively or negatively) aggregates of the surfactant (1R,2S)-dodecyl(2-hydroxy-1-methyl-2-phenylethyl)dimethyl ammonium bromide (DMEB) in the gas phase have been studied by ion mobility mass spectrometry and tandem mass spectrometry. Molecular dynamics (MD) simulations of positively and negatively singly and multiply charged DMEB aggregates have been performed to obtain structural and energetics information. Finally, in order to ascertain some clues on the DMEB growth mechanism, quantum mechanics calculations were carried out. It has been evidenced that positively and negatively singly charged aggregates at low collision energy decompose preferentially by loss of only one DMEB molecule. Increasing the collision energy, the loss of neutrals becomes increasingly abundant. Multiply charged DMEB aggregates are unstable and decompose forming singly charged monomers or dimers. MD simulations show reverse micelle-like structures with polar heads somewhat segregated into the aggregate interior. Finally, a good correlation between experimental and calculated collisional cross sections (CCS) was found. The fragmentation pathways of DMEB charged species evidenced for singly charged aggregates exhibit features similar to that of other detergent aggregates, but multiply charged aggregates showed a system-specific behavior. QM calculations on the optimized structures (21+ , 31+ , 11- and 21- ) indicate that the most determinant interactions are due to an OH---Br hydrogen bonding that is also involved in the link between monomeric DMEB units. The MD models gave CCS values in good agreement with experimental ones, evidenced by a less strict reverse micelle-like structure and a reasonably spread bromine anion distribution Copyright © 2017 John Wiley & Sons, Ltd.

Self-assembled cellulose particles for agrochemical applications

The present work focuses on the hydrophobic functionalization of water soluble celluloses methyl cellulose, hydroxyethyl cellulose and (hydroxypropyl)methyl cellulose with the anticancer steroid diosgenin, and two synthetic brassinosteroids (DI31 and S7) used as agrochemicals. Fourier transform infrared (FT-IR) and nuclear magnetic resonance (NMR) spectroscopies confirmed the cellulose modification. Prepared amphiphilic steroid-cellulose conjugates can self-assemble in water as stable and almost neutral particles with micelle-like structure, as depicted using dynamic light scattering. Whereas scanning and transmission electron microscopies showed 50–300nm almost spherical particles and aggregates in dried state, atomic force microscopy assessed particles aggregates with mean sizes of 220–355nm. These cellulose particles showed sustained steroid release in acidic aqueous medium over 72h, and good stimulatory agrochemical activity in radish cotyledons assay. Thus, the outlined synthesis of steroid-cellulose conjugates, which would be capable to form self-assembled particles in water for controlled release of agrochemicals, is envisioned as a promising strategy.

Polymeric drug delivery micelle-like nanocarriers for pulmonary administration of beclomethasone dipropionate

In this paper, the potential of novel polymeric micelles as drug delivery systems for Beclomethasone Dipropionate (BDP) administration into the lung is investigated. These nanostructures are obtained starting from α,β-poly(N-2-hydroxyethyl)-d,l-aspartamide (PHEA), which was subsequently functionalized with O-(2-aminoethyl)-O’-methylpolyethylenglycole (PEG2000), ethylenediamine (EDA) and lipoic acid (LA), obtaining PHEA-PEG2000-EDA-LA graft copolymer. Empty and drug-loaded micelles possess adequate chemical-physical characteristics for pulmonary administration such as spherical shape, slightly positive surface charge and mean size of about 200nm. Besides, BDP-loaded micelles, obtained with a Drug Loading equal to 5wt%, result to be stable in physiological-mimicking media, protecting the drug from hydrolysis and giving a sustained drug release profile. Moreover, the micelle-like structure and surface characteristics seems to improve drug permeation through the mucus layer. Finally, it is also demonstrated that BDP-loaded PHEA-PEG2000-EDA-LA micelles are able to increase cell uptake of BDP of about 44wt% compared to Clenil® on 16-HBE cells and possess an higher biocompatibility in comparison with the same commercial formulation.

Temperature and anion responsive self-assembly of ionic liquid block copolymers coating gold nanoparticles

In this paper, double hydrophilic ionic liquid block copolymers (ILBCs), poly poly[1-methyl-3-(2-methacryloyloxy propylimidazolium bromine)]-block-(N-isopropylacrylamide) (PMMPImB-b-PNIPAAm) was first synthesized by reversible additionfragmentation chain transfer (RAFT) and then attached on the surface of gold nanoparticles (Au NPs) via a strong gold-sulfur bonding for preparing hybrid nanoparticles (PMMPImB-b-PNIPAAm-@-Au NPs). The hybrid NPs had a three layers micelle-like structure, including a gold core, thermo-responsive inner shell and anion responsive outer corona. The self-assembling behavior of thermal- and anion-response from shell and corona were respectively investigated by change of temperature and addition of (CF3SO2)2N−. The results showed the hybrid NPs retained a stable dispersion beyond the lower critical solution temperature (LCST) because of the space or electrostatic protecting by outer PMMPImB. However, with increasing concentration of (CF3SO2)2N−, the micellization of self-assembling PMMPImB-b-PNIPAAm-@-Au NPs was induced to form micellar structure containing the core with hydrophobic PMMPImB-(CF3SO2)2N− surrounded by composite shell of Au NPs-PNIPAAm via the anionresponsive properties of ILBCs. These results indicated that the block copolymers protected plasmonic nanoparticles remain self-assembling properties of block copolymers when phase transition from outer corona polymer.