Acid Methyl Ester Research Articles

An In Vitro, In silico, GCMS and LCMS Investigation of Crinum jagus (J. Thomp.) Dandy Bulb for Lead Anti-Hepatocellular Carcinoma Compounds

Hepatocellular carcinoma is a leading cause of cancer-related death around the world. In this study, the 3-(4, 5-dimethylthiazolyl-2)-2, 5-diphenyltetrazolium bromide (MTT) assay was used to investigate the anticancer activity of five chromatographic fractions of Crinum jagus methanol bulb extract against the hepatocellular carcinoma (HepG2) cell line. The IC50 value was used as a measure of anticancer activity. The most active fraction was analyzed using GCMS and LCMS. The binding energies of the identified compounds with Caspase-3, Caspase-9 and EGFR were evaluated and compared with that of the standard drug, Sorafenib. The compounds' drug-likeness was evaluated by applying Lipinski's rule of five. The IC50 value of the most active fraction was 37 μg/ml. Nineteen (19) compounds, primarily fatty acids, fatty acid esters, and flavonoids, were identified from the fraction by GCMS and LCMS analysis. Of the nineteen (19) compounds identified in the most active fraction, linoelaidic acid (-8.23 kcal mol-1), hexadecanoic acid (-7.96 kcal mol-1) and 9,12-Octadecadienoic acid (-7.78 kcal mol-1) had better binding affinity for Caspase-3 than Sorafenib; hexadecanoic acid methyl ester (-8.10 kcal mol-1) and pentyl linoleate (-8.00 kcal mol-1) had comparable binding energy with Sorafenib (-8.47 kcal mol-1) against Caspase-9; while hexadecanoic acid (-8.29 kcal mol-1), linoelaidic acid (-8.58 kcal mol-1), and pentyl linoleate (-8.66 kcal mol-1) had better binding energy than Sorafenib (-8.24 kcal mol-1) against EGFR. These compounds passed Lipinski’s test for drug-likeness. The study's findings lend credence to the plant's traditional use as a cancer remedy.

Cold-Active Lipase from the Ice Cave Psychrobacter SC65A.3 Strain, a Promising Biocatalyst for Silybin Acylation.

Cold-active lipase from the psychrophilic bacterial strain Psychrobacter SC65A.3 isolated from Scarisoara Ice Cave (Romania) was cloned and characterized as an extremophilic biocatalyst for silybin acylation. Structural analyses highlighted conserved motifs confirming a functional lipase and the presence of primary structure elements for catalysis at low temperatures. The recombinant enzyme (PSL2) heterologously expressed in Escherichia coli was purified in one step by affinity chromatography with a yield of 12.08 ± 1.72 µg L-1 of culture and a specific activity of 20.1 ± 3.2 U mg-1 at 25 °C. Functional characterization of PSL2 showed a neutral (7.2) optimal pH and a high thermal stability up to 90 °C. Also, this lipase was stable in the presence of different organic solvents, with 60% residual activity when using 20% DMSO. Kinetic measurements indicated performant catalytic efficiency of PSL2 for different short and long chain fatty acids, with Km in the mM range. The catalytic activity of PSL2 was assessed for silybin acylation with various fatty acids and fatty acid methyl esters, demonstrating a 90% silybin conversion when methyl decanoate ester was used. This result clearly highlights the biocatalytic capability of this new cold-active lipase.

Exploring Alkali Hydroxide Influence on Calcium Titanate Formation for Application in Biodiesel Catalysts

Biodiesel has been recognized as the most widely utilized biofuel around the world due to its significant role in reducing the consumption of crude oil and lowering environmental pollution levels. By serving as a renewable alternative to fossil fuels, bioethanol helps decrease greenhouse gas emissions and contributes to a more sustainable energy future. Traditionally, alkali hydroxides like NaOH and KOH have been mainstays in biodiesel synthesis. However, their overuse can lead to unwanted byproducts and operational complexities. Since calcium titanate can occur at a strong base condition, it presents an alternative avenue worth exploring. In this study, we investigate the influence of alkali hydroxides, namely LiOH, NaOH, and KOH, on the formation of calcium titanate through hydrothermal methods, with varying heating times. We aim to understand how different hydroxides affect the synthesis process and the resultant properties of calcium titanate. We delve into the vibrational properties of Ca‒O‒Ti and Ti‒O bonds using Fourier transform infrared spectroscopy (FTIR), confirming the presence of calcium titanate (JCPDS No.42-0423) through X-ray diffractometry (XRD). This thorough characterization provides insight into the structural integrity and composition of the synthesized materials. Moreover, scanning electron microscopy (SEM) reveals the intriguing cube-like morphology of calcium titanate, offering visual evidence of its unique structure. The fatty acid methyl ester Iimpressively, our results show that calcium titanate synthesized in 7 M NaOH and KOH solutions, heated for 24 hours, emerges as a promising biodiesel catalyst. We observe fatty acid methyl ester provides the percentages of 63.67% and 90.02%, respectively, indicating the catalytic efficacy of these materials in biodiesel production. These findings not only contribute to the understanding of calcium titanate synthesis but also pave the way for a sustainable future in biodiesel production by introducing efficient and eco-friendly catalysts.

Induced Electron Traps via the PCBM in P(VDF-HFP) Composites to Enhance Dielectric and Energy Storage Performance.

Polymer-based composites with excellent dielectric properties are essential for advanced energy storage applications. In this work, the [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) as a filler was incorporated into the poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP)) composite to improve its dielectric performance. P(VDF-HFP) composite films with varying PCBM concentrations were prepared via solution casting and their dielectric, energy storage, and charge-discharge properties were characterized. It was found that the doped PCBM could introduce new charge traps with an energy level of 1.25 eV that modulate charge transport and energy storage characteristics of the polymer matrix. The dielectric constant of the composites was enhanced to the maximum of 10.87 as 0.2 vol% PCBM was added, while the breakdown strength reached 455 MV/m, achieving an energy density of 7.38 J/cm3, which is 33% higher than the pristine P(VDF-HFP) film. Furthermore, the charge-discharge efficiency of the composites was enhanced 66% under the electric field of 300 MV/m. These results demonstrate that PCBM significantly improves the dielectric and energy storage properties of P(VDF-HFP) composites, providing a promising approach for the development of high-performance dielectric materials in flexible energy storage devices.

Maximization of Biodiesel production from oil that produced during salmon smoking process with high amount of omega-3 by using homogenous catalyst.

The escalating global demand for oil, coupled with declining fossil fuel production, prompts the urgent exploration of renewable alternatives. To address this challenge, researchers are actively seeking environmentally friendly fuels like biodiesel. Among potential feedstocks, oil that is produced from salmon smoking process during industry emerges as a promising option. Smoked salmon oil could be a challenge when producing biodiesel due to its high content of omega-3 compounds. Using homogenous commercial catalyst from alkali to achieve the highest yield from salmon smoking oil was the aim of the current study. A Box-Behnken design and response surface methodology in Design Expert software (version 13) was used to study the effect of four main factors on the biodiesel yield from salmon smoking oil. The optimum biodiesel values were 70°C, 90 min, 0.753 wt.%, and 20 wt.% for temperature, reaction time, sodium hydroxide concentration, and methanol concentration, respectively. At these optimum values, the highest biodiesel production was 92.0% with fatty acid methyl ester contents of 83.4% and conversion efficiency of 77%. Thin-layer chromatography and thermal gravimetric analysis confirmed the successful production of biodiesel at optimized conditions. Using Aspen Plus simulation software confirmed the cost-effectiveness of the homogenous catalyst used for enhancing biodiesel production from salmon smoking oil.

Nematicidal efficacy of Cymbopogon nardus, Pelargonium graveolens essential oils and Annona squamosa extract against Meloidogyne incognita and M. graminicola

A crude hexane extract of seed kernel was processed into fatty acid methyl esters (FAME) using methanolic-sulfuric acid. Herbal mixtures (seed extracts of A. squamosa and essential oils of Cymbopogon nardus (citronella) and Pelargonium graveolens (geranium)) were evaluated against root knot nematode (Meloidogyne spp). The mortality of J2s of M. incognita in hexane and methanol extracts (AHE+AME) of A. squamosa with geranium oil (GO) ranged from 50.75-89.75% to 71.50-99.00% at 31.25 to 1000 μgmL-1 in 24 to 96 hours. The number of galls after CO+AHE+AME treatment was 4.0 ± 0.0 and 5.67 ± 0.58 galls/seedling and were recorded at 1000 and 500 μgmL-1 treatments on 30 days after inoculation, compared to carbofuran (3.0 ± 0.0 and 4.3 ± 0.6 galls/seedling) at 1000 and 500 μgmL-1 and velum prime (3.6 ± 0.6 and 4.6 ± 0.6 galls/seedling) at 1000 and 500 μgmL-1. The maximum shoot length of brinjal seedlings was recorded in CO+AHE+AME treatment compared to carbofuran (47.3 ± 0.6cm) and velum prime (48.7 ± 0.6 cm) at 1000 μg mL-1 in soil drenching application. Methanol and hexane extracts (AHE+AME) obtained from Annona squamosa seeds were investigated for their nematicidal properties. M. graminicola in direct-seeded rice at the nursery level and M. incognita in brinjal (eggplant) were controlled for up to sixty days when treated with these mixtures.

Antiproliferative Effects of Ajuga orientalis Methanolic Extract: In Vitro and In Silico Insights

AbstractAjuga orientalis, a perennial herb from the Lamiaceae family, is traditionally used in Jordanian folk medicine for its therapeutic properties. This study evaluates the phytochemical profile, cytotoxicity, drug‐likeness, and molecular docking of the methanolic extract of A. orientalis to explore its potential as a source of novel therapeutic agents. GC‐MS analysis identified 21 compounds, including oleic acid methyl ester (27.1%) and palmitic acid (12.5%). The extract demonstrated significant concentration‐dependent cytotoxicity against RAW264.7 macrophage cells, with an IC50 of 91.5 µg/mL. Molecular docking studies revealed fundamental interactions of phytochemicals with cancer‐related proteins, including VEGFR2 and TLR4/MD‐2, showing strong binding affinities. Notably, 1,7‐di(2,5‐dimethylphenyl)‐2,2,4,4,6,6‐hexamethyl‐1,3,5,7‐tetraoxa‐2,4,6‐trisilaheptane and the 2TBDMS derivative of 4‐hydroxybenzeneacetic acid exhibited promising interactions, indicating potential for inhibiting angiogenesis and modulating immune responses. Drug‐likeness evaluation of 18 compounds showed that 11 meet the criteria for oral bioavailability, though some challenges for drug development remain. This research underscores the therapeutic potential of A. orientalis compounds in cancer treatment and immune modulation, suggesting further experimental validation and development of these bioactive compounds.

Special-point approach for optical absorption coefficient calculations on two-dimensional self-assemblies of type-II perovskite quantum dots

All-inorganic perovskite quantum dots with the usual cubic shape have emerged as a successful and low-cost alternative to electronically functional nanomaterials motivating various fields of applications, including high-efficiency photovoltaics. Here, we present an efficient and almost analytic approach for optical absorption coefficient calculation on self-assembled perovskite quantum dot films with type-II band alignment. The approach takes advantage of the special point technique for integration over the two-dimensional Brillouin zone, which minimizes the computational cost. The set of special wave-vector points is generated using the Monkhorst and Pack method. The optical absorption spectrum for phenyl-C60-butyric acid methyl ester (PCBM)/CsPbI3quantum dot films is computed, in good agreement with the experiment assuming a homogeneous linewidth of 50 meV and considering a ten special-point set. We show that light absorption in these systems is a cooperative optoelectronic property resulting from the quantum-mechanical coupling between perovskite nanocubes, leading to extended system states. The generality of this approach makes it suitable for calculating the optical absorption coefficient in a broad class of perovskite quantum dot systems.

Efficient and stable inverted perovskite solar cells enabled by homogenized PCBM with enhanced electron transport

Fullerene derivatives are extensively employed in inverted perovskite solar cells due to their excellent electron extraction capabilities. However, [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) agglomerates easily in solution and exhibits a relatively low ionization barrier, increasing charge recombination losses and charge accumulation in the interface. Here, tetramethylthiuram disulfide (TMDS) is introduced into the PCBM solution to induce the formation of reducing sulfur radicals through UV light irradiation, allowing for n doping of the PCBM material. The resulting modified PCBM layer exhibits enhanced conductivity and electron mobility, significantly suppressing charge recombination. As a result, the resulting devices incorporating TMDS achieve a champion efficiency of 26.10% (certified 25.39%) and 24.06% at a larger area (1.0 cm2) with negligible hysteresis. More importantly, the optimized devices retain 95% and 90% of their initial efficiency after 1090 h under damp heat testing (85 °C and 85% relative humidity) and after 1271 h under maximum power point-tracking conditions, respectively.

Elucidating the hysteresis effect in printed flexible perovskite solar cells with SnO2 quantum dot- and PCBM-based electron transport layers

Recently, flexible perovskite solar cells (FPSCs) fabricated using solution-processed printing techniques have garnered significant attention. However, challenges remain in achieving cost-effective, scalable manufacturing under ambient conditions and ensuring stable, efficient devices. This study focuses on fabricating printed FPSCs using the slot-die coating technique and examines the impact of SnO2 quantum dot (QD) and (6,6)-Phenyl C61 butyric acid methyl ester (PCBM) based electron transport layers (ETLs) on device performance and hysteresis. Experimentally results show that SnO2 QD-based devices exhibited favorable photovoltaic properties but significant hysteresis compared to PCBM-based devices. Numerical simulations have shown that the hysteresis effect in devices is influenced not only by the higher concentration of mobile ions in the perovskite layer of PCBM-based devices compared to SnO2 QD-based devices, but also by the more effective redistribution of these ions during forward and reverse J-V scans. The results provide insights into the behavior of printed FPSCs with different ETLs, contributing to the development of high-performance, hysteresis-free printed FPSCs.

Treatment of acidic crude palm oil using supported benzenesulfonic acid-based deep eutectic solvents in trickle bed reactor

In this study, a deep eutectic solvent (DES) from benzenesulfonic acid and choline chloride (BZSA-ChCl-DES) was prepared for the treatment of high free fatty acids (FFA) in acidic crude palm oil (ACPO). The DES was impregnated into activated carbon (AC-DES) to produce a supported catalyst used in a trickle bed reactor (TBR) for FFA esterification. Under optimal conditions, using 8 g of AC-DES at 60 °C, with ACPO and methanol flow rates of 1 mL/min and 4 mL/min, respectively, the TBR successfully treated 3.5 L of ACPO. A batch reactor, used for comparison, showed that the continuous TBR process required less catalyst per gram of treated oil (2.87 mg catalyst/g) which can enhance the recyclability. Moreover, the continuous process could sustain up to five recycle runs that can treat 1.5 L under optimal conditions (3.5 wt% catalyst dosage, 10:1 M ratio, 60 °C reaction temperature, and 30 min). This approach presents a promising continuous approach for converting high FFA to fatty acid methyl ester (FAME) for biodiesel production.

Validation of ethnopharmacological findings of Aegle marmelos (L.) Correa through phytochemical screening and bioactivity assay

For centuries, medicinal plants have been integral to human health and well-being across the world. Aegle marmelos (Rutaceae), a medicinal plant indigenous to Nepal, holds substantial ethnomedicinal use among indigenous communities in South Asian countries. Present study aimed to explore the integration of contemporary scientific analysis of the phytochemical composition and bioactivity of A. marmelos leaf extracts harvested from Nepal with traditional ethnopharmacological knowledge. Leaf extracts of A. marmelos were subjected to phytochemical analysis utilizing mass spectrometry. The extracts underwent in vitro evaluation for antimicrobial, antidiabetic, antioxidant, and toxicity activities. Hexane fraction was found to possess volatile oils, polyphenols, and tannins, while other fractions were found to have alkaloids, terpenoids, coumarins, flavonoids, glycosides, saponins, and reducing sugars. Further analysis of the hexane fraction identified 21 compounds with over 90 % accuracy. The main phytoconstituents were 9,12,15-octadecatrienoic acid methyl ester (24.25 %), hexadecanoic acid (10.89 %), methylcyclohexane (8.39 %), methyl ester (4.26 %), and caryophyllene (4.10 %). The methanol extract exhibited significant antibacterial activity against Staphylococcus aureus and Escherichia coli. Additionally, the methanol extract demonstrated pronounced cytotoxic effects against brine shrimp, with an LC50 value of 50.11 µg/mL. The 1,1-diphenyl-2-picryl hydrazyl assay revealed both methanol and acetone extract to have notable antioxidant activity, with IC50 values of 90.63 ± 1.47 µg/mL and 89.93 ± 2.52 µg/mL, respectively. Remarkably, the acetone extract displayed superior antidiabetic activity compared to acarbose, with an IC50 value of 13.50 ± 0.79 µg/mL. Our findings proves A. marmelos leaf extracts to harbor significant bioactive constituents, suggesting their potential as sources of natural compounds for applications in medicine and healthcare.

Enhancing biomass, hydrocarbon and biodiesel properties of green microalga Botryococcus braunii KMITL through gamma and UV radiation exposure.

This study investigated the effects of gamma (137Cs, 0-250Gy) and UV (UV-C, 0-12h) radiation on growth and biodiesel properties of Botryococcus braunii KMITL. For gamma radiation, maximum biomass (1.37 ± 0.02g L-1) was achieved with 50Gy, while a dose of 200Gy resulted in the highest hydrocarbon content (51.84 ± 0.20%) and yield (0.66 ± 0.01g L-1). For UV radiation, a 9h exposure produced the highest biomass (2.45 ± 0.05g L-1), hydrocarbon content (55.01 ± 1.22%), and yield (1.35 ± 0.04g L-1). Algae exposed to gamma radiation within the range of 0-150Gy exhibited C16:0 as the dominant fatty acid methyl ester (FAME), similar to those exposed to UV radiation, while algae exposed to 200-250Gy displayed C18:1n9t as the dominant FAME. High levels of gamma and UV radiation were observed to lengthen fatty acid chains and increase unsaturated fatty acids. The cetane values of biodiesel from algae exposed to gamma and UV radiation ranged from 64.55 ± 0.14-66.47 ± 0.20 and 59.43 ± 0.04-65.27 ± 0.22, respectively, all meeting standard criteria. Both gamma and UV radiation also improved the saponification value and cold flow properties of the biodiesel. These findings suggest that controlled levels of gamma and UV radiation effectively enhance hydrocarbon yields with significant implications for biofuel production.

No-Till and Crop Rotation Are Promising Practices to Enhance Soil Health in Cotton-Producing Semiarid Regions: Insights from Citizen Science

This on-farm study was conducted to assess the impact of six prevalent crop management practices adopted by growers in West Texas on various indicators of soil health. This study is a part of a citizen science project, where we collaborated with cotton growers who helped with standardized sample and data collection from 2017 to 2022. This project aimed to identify soil management practices that increase carbon sequestration, enhance biological activities, and improve overall soil health. We monitored soil moisture, soil organic matter (SOM), inorganic nitrogen (NH4+-N and NO3−-N) and other exchangeable nutrients, and soil microbial abundances as obtained via fatty acid methyl ester (FAME) in 85 fields, incorporating different management practices during the cotton growing season. In our study, volumetric moisture content (VWC) was increased by no-till, irrigation, and crop rotation, but the addition of residue decreased VWC. No-till, irrigation, and crop rotation increased SOM, but a cover crop decreased SOM. No-till and residue retention also increased microbial biomass carbon (MBC). Tillage, irrigation, and crop rotation influenced the abundance of the main microbial groups, including bacterial, fungi, and arbuscular mycorrhizal fungi (AMF). Additionally, water content, SOM, and microbial abundances are correlated with clay percentage. Our results indicate that no-till and crop rotation are the two most crucial soil management approaches for sustainable soil health. As such, implementing both no-till and crop rotation in the cropping systems has the most promising potential to increase the soil resilience in dryland cotton production in semiarid regions, thereby helping growers to maintain cotton production.

Transesterification of Azadirachta indica seed oil into biodiesel using MgO-supported tri-metallic catalyst– synthesis and characteristic evaluation

Environmentally sustainable biodiesel from non-edible waste Azadirachta indica (neem) seed oil provides an economical alternative to combat issues caused by fossil fuel combustion. The current study reports specifically a bi-functional trimetallic (Ca-Sr-Mo) catalyst delineated across MgO support synthesized via wet impregnation and green synthesis route using Cassia fistula extract. In FTIR analysis, peaks appeared at 992, 1390, 1424 cm−1 represent the C–O stretching, C–H deforming and M–O–M bending deformation vibrations, respectively. The diffraction peaks of all CaO, SrO, MoO2, and MgO in the XRD pattern represent the formation of catalysts. The prepared catalyst is employed in the transesterification reaction to convert A. indica oil into fatty acid methyl ester. The study used the response surface methodology to examine factors that could affect the conversion rate, including oil-methanol molar ratio, reaction time, and catalyst loading. The results were analyzed to determine the best combination of factors that yields the optimal catalytic transesterification process. The highest yield of 89.92 % was achieved under optimum conditions of methanol-to-oil (18:1), catalyst loading (5 wt%), and time (6 h). In FTIR analysis, the new peak appeared at 1160 cm−1, indicating the formation of methyl esters, while 1H NMR analysis confirmed the successful conversion of A.indica oil into FAMEs by the appearance of strong singlet at 3.66 ppm for methoxy proton.1H NMR also indicated a high yield (90.09 %) which is comparable to RSM obtained yield. Additionally, a reaction mechanism has been proposed. Specifically, GC-MS FAME profiles and physicochemical testing confirmed that biodiesel meets ASTMD6751 and EN14214 standards with key fatty acid methyl esters and desirable properties.

Bioactive phenolic contents of Scorzonera ketzkhowelii Sosn. ex Grossh. (Asteraceae) with comprehensive in vitro and in silico studies

This study explores the antioxidant, anti-inflammatory, and anticholinesterase properties of extracts from the natural plant Scorzonera ketzkhowelii for the first time. Additionally, it focuses on isolating phenolic compounds from the ethyl acetate sub-extract, elucidating their structures, and investigating their in-silico bioactivities. Twelve phenolic compounds were isolated and characterized from the ethyl acetate sub-extracts, including hydrangenol (1), 4-hydroxybenzaldehyde (2), luteolin (3), esculin (4), 3-O-caffeoylquinic acid ethyl ester (5), 3-O-caffeoylquinic acid methyl ester (6), kaempferol 3-O-β-glucopyranoside (7), quercetin 3-O-α-arabinopyranoside (8), 3,5-di-O-caffeoylquinic acid ethyl ester (9), thunberginol F 7-O-β-D-glucopyranoside (10), hydrangeic acid 4′-O-β-D-glucopyranoside (11), and 3-O-caffeoylquinic acid (12). The ethyl acetate sub-extracts from both aerial and subaerial parts demonstrated exceptional radical scavenging activity. Moreover, all fractions exhibited potent inhibition against COX-I and COX-II enzymes, with notable inhibitory effects observed in the ethyl acetate and dichloromethane sub-extracts against AChE. Additionally, the inhibitory effects of these compounds were assessed against various biological targets, including TNFα, COX-I, COX-II, human CYP450, and hAChE, through molecular docking studies. According to the molecular docking and dynamics studies, compound 9 emerged as particularly noteworthy across all complexes, exhibiting stable binding modes and promising interactions with key residues involved in inhibition.

Dye-Containing Polymers with π-Extened Diketopyrropyrrole Derivatives for Semi-Transparent Organic Photovoltaics.

Dye-containing polymers P1 (PEDPP-OT-BDT) and P2 (PEDPP-OT-BDTT) including a π-extended diketopyropyrrole (DPP) derivative and electron-rich thiophene fused ring units (4,8-bis((2-ethylhexyl)oxy)benzo[1,2-b:4,5-b']dithiophene for P1 and 4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b']dithiophene for P2) were synthesized as narrow band gap dyes. A π-extended DPP (EDPP-OT-BrPh), fragment of the polymers P1 and P2, was obtained by extending the π-conjugation of DPP using Ru(III)-catalyzed C-H and N-H activation reported by Gońka et al. in 2019, exhibiting a high quantum yield (ϕem=0.84) and small HOMO-LUMO gap (Eg=1.69 eV) due to the spatial overlap of the HOMO and LUMO orbitals. The solubility of the π-extended DPP was improved by introducing four 2-octylthophene side chains around the periphery of the planer dye moiety, while maintaining the high planarity of the dye molecule, which is essential to the function of optoelectronic devices. As a result, P1 and P2, polymerized with the π-extended DPP and BDT derivatives, exhibit carrier mobility of approximately 10-5 cm2/Vs in organic field-effect transistors (OFETs). In bulk heterojunction (BHJ) solar cells with [6,6]-phenyl-C61-butyric acid methyl ester (PCBM), they demonstrate a power conversion efficiency (PCE) of 1.0 % with an average transmittance (AVTs) of around 60 %.

Enhancing the production and immobilization of cell‐bound lipase from yeast‐like fungus Magnusiomyces capitatusA4C for sustainable biodiesel production in a packed bed reactor

AbstractMagnusiomyces capitatus A4C, a mycelium‐forming and lipase‐producing yeast‐like fungus, was employed in a five‐level factorial design to optimize the collective and interactive influences of carbon, nitrogen and emulsifying sources and their possible effects on cell‐bound lipase (CBL) and cell biomass production. The cell culture of M. capitatus A4C was incubated along with biomass support particles (BSPs) to immobilize the enzyme while anchoring CBL on their surfaces. Among the BSPs tested, CBL immobilized on loofah sponge under optimized conditions showed a substantial hydrolytic activity of 12.7 U mL−1 and a cell‐loading capacity of 0.61 g g−1 of BSPs. Immobilized CBL was applied for biodiesel production via transesterification and esterification. The conversion percentage of triacylglycerides was approximately 100% at 24 h with the addition of water at 1:1 (v/v). The conversion of oleic acid into biodiesel via esterification was 100% at 48 h in the presence of 15% (v/v) isooctane. Further, biodiesel production was scaled up using a packed bed reactor. The batch production of biodiesel in a packed bed reactor through transesterification was 96.2%, with a circulation flow rate of 5.5 mL min−1 for 18 h. On the other hand, oleic acid conversion into biodiesel via esterification was 99.5%, with a circulation flow rate of 5.5 mL min−1 for 24 h. Further investigation revealed that the immobilized biocatalyst exhibited higher stability with esterification (85.3% fatty acid methyl ester) after ten repeated cycles.

Multicomponent Synthesis of C(8)-Substituted Purine Building Blocks of Peptide Nucleic Acids from Prebiotic Compounds.

We have explored the reaction of a three-components mixture of aminomalononitrile, urea and α-amino acid methyl esters for the multicomponent synthesis substituted purines resembling PNA's building blocks. 2,6-diamino-purines, 6-amino-3,9-dihydro-2H-purin-2-one (iso-guanines), and 3,9-dihydro-6H-purin-6-one derivatives, selectively decorated at C(8)-position of the purine ring with different amino acid residues, were obtained from acceptable to good yields. The regio-selectivity of the transformation was controlled by the use of urea in the ternary mixture and by the annulation agent involved in the ring-closure of amino-imidazole carbonitrile intermediates. Solvent free conditions, microwave irradiation and simple one-carbon containing reagents further satisfied the major requirement of atom economy and sustainable chemistry. Due to the prebiotic nature of the three-components mixture and of annulation agents, it also embodies the possibility for the synthesis of novel PNAs bearing purine nucleobases decorated at C(8)-position of the imidazole ring as alternative RNA analogues in molecular evolution.

Temperature Effects on Seed Germination and Seedling Biochemical Profile of Cannabis Landraces

This study investigated the effect of temperature on the germination and seedling biochemical profiles of eight cannabis landraces, namely Ladysmith Ugwayi wesiZulu (L1) and Iswazi (L2), Durban Poison (H1), Bergville Ugwayi wesiZulu (B1), Natal (B2), and Iswazi (B3), and Msinga Ugwayi wesiZulu (M1) and Iswazi (M2). Seed viability, germination rate, and germination percentage were evaluated along with seedling amino acids, carbohydrates, and fatty acids methyl esters (FAMEs) under day/night temperature regimes of 20/15 °C, 30/25 °C, and 40/35 °C. Results showed a significant effect (p < 0.001) of temperature on germination percentage, rate, and biochemical profiles of cannabis landraces. Landraces L1, B1, H1, B2, and M1 had higher germination at 20/15 °C, while B3, M2, and L2 performed better at 30/25 °C. Biochemical profiles varied with temperature and landraces. Amino acid content increased with temperature but did not correlate with germination indexes. Carbohydrates and FAMEs decreased with rising temperature, peaking at 30/25 °C. FAMEs strongly correlated with germination indexes, linking lipid composition to seed performance. Sorbitol positively correlated with germination, while glucose and fructose showed indirect correlations. This study underscores the impact of temperature on germination and the biochemical profiles of cannabis landraces, highlighting the importance of considering genotype-specific responses in varietal selection.