Effective Monitoring Method Research Articles

Mapping fine-scale seagrass disturbance using bi-temporal UAV-acquired images and multivariate alteration detection

Seagrasses provide critical ecosystem services but cumulative human pressure on coastal environments has seen a global decline in their health and extent. Key processes of anthropogenic disturbance can operate at local spatio-temporal scales that are not captured by conventional satellite imaging. Seagrass management strategies to prevent longer-term loss and ensure successful restoration require effective methods for monitoring these fine-scale changes. Current seagrass monitoring methods involve resource-intensive fieldwork or recurrent image classification. This study presents an alternative method using iteratively reweighted multivariate alteration detection (IR-MAD), an unsupervised change detection technique originally developed for satellite images. We investigate the application of IR-MAD to image data acquired using an unoccupied aerial vehicle (UAV). UAV images were captured at a 14-week interval over two seagrass beds in Brisbane Water, NSW, Australia using a 10-band Micasense RedEdge-MX Dual camera system. To guide sensor selection, a further three band subsets representing simpler sensor configurations (6, 5 and 3 bands) were also analysed using eight categories of seagrass change. The ability of the IR-MAD method, and for the four different sensor configurations, to distinguish the categories of change were compared using the Jeffreys-Matusita (JM) distance measure of spectral separability. IR-MAD based on the full 10-band sensor images produced the highest separability values indicating that human disturbances (propeller scars and other seagrass damage) were distinguishable from all other change categories. IR-MAD results for the 6-band and 5-band sensors also distinguished key seagrass change features. The IR-MAD results for the simplest 3-band sensor (an RGB camera) detected change features, but change categories were not strongly separable from each other. Analysis of IR-MAD weights indicated that additional visible bands, including a coastal blue band and a second red band, improve change detection. IR-MAD is an effective method for seagrass monitoring, and this study demonstrates the potential for multispectral sensors with additional visible bands to improve seagrass change detection.

Lubrication condition monitoring of journal bearings in diesel engine based on thermoelectricity

There is still a lack of effective lubrication condition monitoring methods in the field of diesel engines. The paper proposes a novel thermoelectric approach to divide the lubrication state of bearings. First, the generation mechanism of thermoelectric potential on bearings is clarified. Then, both experimental and simulation studies are done, and a strong correlation between lubrication and thermoelectric potential is shown. The film thickness and temperature are further confirmed as significant factors influencing thermoelectric potential. Generally, the thermoelectric potential increases with temperature. However, a small film thickness ratio (when the film thickness ratio is less than 4) will suppress the thermoelectric potential. Three typical lubrication states of bearings are distinguished through thermoelectric potential and supported by the Stribeck curve results. Moreover, the significant influence of lubrication on the bearing is confirmed through the analysis of surface morphology and composition.

IoT-enabled effective real-time water quality monitoring method for aquaculture

Aquaculture is growing industry from the perspective of sustainable food fulfillment and county's economic development. Technology oriented aquafarming is the solution for effective water quality monitoring and high yield production. Internet of Things (IoT) integrated aquaculture can cater to such requirements. This research article introduces a comprehensive method aimed at seamlessly incorporate IoT sensors into aquafarming environments, utilizing Arduino boards and communication modules. The proposed method measures accurate water quality parameters, such as temperature, pH levels, and Dissolved Oxygen (DO), which are essential for maintaining optimal conditions for suitable aquaculture environment. This method enables the real-time collection of critical data points that are essential prevent fish diseases and mortality with low human intervention and maintenance cost. The key contributions of the methodology are mentioned below.•Design and development of a compact and efficient Printed Circuit Board (PCB) to achieve accurate sensor data readings and reliable communication in an aqua environment.•Prevent fish disease and mortality rate through data-driven decision incorporating correlation of DO, pH, and temperature sensor data.•Conducted instrument calibration checks and cross-validated automated system data with manual observations through repeatability tests to ensure precise measurements of sensor parameters.

Prospect and Challenges of Volatile Organic Compound Breath Testing in Non-Cancer Gastrointestinal Disorders.

Breath analysis, despite being an overlooked biomatrix, has a rich history in disease diagnosis. However, volatile organic compounds (VOCs) have yet to establish themselves as clinically validated biomarkers for specific diseases. As focusing solely on late-stage or malignant disease biomarkers may have limited relevance in clinical practice, the objective of this review is to explore the potential of VOC breath tests for the diagnosis of non-cancer diseases: (1) Precancerous conditions like gastro-esophageal reflux disease (GERD) and Barrett's esophagus (BE), where breath tests can complement endoscopic screening; (2) endoluminal diseases associated with autoinflammation and dysbiosis, such as inflammatory bowel disease (IBD), irritable bowel syndrome (IBS), and coeliac disease, which currently rely on biopsy and symptom-based diagnosis; (3) chronic liver diseases like cirrhosis, hepatic encephalopathy, and non-alcoholic fatty liver disease, which lack non-invasive diagnostic tools for disease progression monitoring and prognostic assessment. A literature search was conducted through EMBASE, MEDLINE, and Cochrane databases, leading to an overview of 24 studies. The characteristics of these studies, including analytical platforms, disorder type and stage, group size, and performance evaluation parameters for diagnostic tests are discussed. Furthermore, how VOCs can be utilized as non-invasive diagnostic tools to complement existing gold standards is explored. By refining study designs, sampling procedures, and comparing VOCs in urine and blood, we can gain a deeper understanding of the metabolic pathways underlying VOCs. This will establish breath analysis as an effective non-invasive method for differential diagnosis and disease monitoring.

Production processes optimization through machine learning methods based on geophysical monitoring data

The purpose of the article is to create an effective method for low-delay monitoring of the operating state of a drill string and a drill bit without interfering with the proper drilling process. For the drilling process to be continuously controlled, an experimental setup that operates by utilizing the phase-metric method of control was developed. Any movement of the bit causes a change in the electrical characteristics of the probing signal. To obtain a stable signal from a bit immersion depth of up to 250 m, a frequency of probing electrical signals of 166 Hz and an amplitude of up to 500 V were used; the sampling rate of an analog-to-digital converter (ADC) was 10101 Hz. To identify the state of the drill string and the bit based on graphs of time-dependences of changes in the probing signal electrical characteristics, the present authors investigated a number of deep learning methods. Based on the results of the study, a series of capsular neural network methods ( CapsNet ) was chosen. The authors developed modifications of 2D-CapsNet: windowed Fourier transform (WFT) - 2D-CapsNet and frequency slice wavelet transform (FSWT) - 2D-CapsNet. Both of these methods showed a 99% accuracy in determining the transition between two layers of rocks with different properties, which is 2–3% higher than the currently used measurement-while-drilling (MWD) and logging-while-drilling (LWD) rock surveys. Both of these methods unambiguously reveal self-oscillations in the drill string. When determining a fully serviceable bit in the case of self-oscillations, the (FSWT) - 2D-CapsNet method showed an accuracy of 99%.

Quantitative prediction of soil chromium content using laboratory-based visible and near-infrared spectroscopy with different ensemble learning models

Soil heavy metal chromium pollution poses significant threats to human health and ecosystems, necessitating accurate quantitative prediction methods for effective monitoring and management. This study aims to develop robust predictive models for soil chromium content in farmland soils of Mojiang Hani Autonomous County, Pu’er City, Yunnan Province, China. These models utilize ensemble learning techniques based on visible and near-infrared spectroscopy. Operations before model building involved partitioning datasets with the Kennard-Stone algorithm to ensure representative training and testing sets. Visible and near-infrared spectroscopy-data preprocessing was performed using Savitzky-Golay smoothing and first-order derivative transformations to enhance signal quality. Bands selection was achieved through the Successive Projections Algorithm (SPA), effectively reducing data dimensionality and collinearity. Six ensemble learning models were constructed and assessed for their predictive performance: Bagging-DTR, Random Forest (RF), Adaboost-DTR, XGBoost-DTR, Stacking-1, and Stacking-2. These models utilized Decision Trees (DTR) and Linear Regression (LR) as base learners. Results demonstrated that ensemble models significantly outperformed individual base learners. Notably, the Stacking-2 model achieved the highest accuracy with an R^2 of 0.954, RMSE of 125.967 mg/kg, and RPD of 4.667. To validate the model’s practical applicability, spatial interpolation of soil Cr content was conducted using the Kriging method based on Stacking-2 model predictions. The spatial distribution maps of measured and predicted values exhibited high congruence, underscoring the model’s effectiveness in accurately mapping Cr distribution across the study area. This study underscores the efficacy of integrating ensemble learning with visible and near-infrared spectroscopy-data preprocessing and SPA for precise soil heavy metal prediction. The findings offer valuable insights and a scientific basis for enhanced soil quality monitoring, environmental risk assessment, and informed agricultural land management and pollution control.

Sewage surveillance of SARS-CoV-2 in Tokyo (May 2020-June 2022): method using high-throughput, fully-automated platform.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is shed in saliva, sputum, and feces of the novel coronavirus disease 2019 (COVID-19) patients, and SARS-CoV-2 RNA has been detected in sewage. Thus, many regions worldwide have implemented the measurement of SARS-CoV-2 RNA in sewage as a monitoring tool for COVID-19 prevalence. Here, we report the monitoring of two wastewater treatment plants in Tokyo from May 2020 to June 2022 using a fully automated genetic testing method for the solid fraction of sewage. We found that SARS-CoV-2 sewage monitoring using the Panther System with the Aptima SARS-CoV-2 Assay Kit is an effective method of qualitative monitoring. Furthermore, spike gene mutations (N501Y, L452R, E484A) by real-time PCR using test residues were detected in some samples, which reflected the epidemic status. Nevertheless, our findings demonstrate that the use of a fully automated testing platform is effective for SARS-CoV-2 RNA detection in the solid fraction of sewage.

Experimental study on joint sensing and early warning method of landslide disaster based on NPR-OFST

In order to explore more effective methods of landslide disaster monitoring and controlling, NPR anchor cable and optical fiber grating strain sensor are physically combined to form a slope reinforcement-monitoring integration system, with PVC pipe an intermediary. Physical model test is carried out according to timely warning of landslide disasters of the Newtonian force monitoring system. At the same time, the optical fiber sensing technology has the condition of continuous perception of time and space. The feasibility of monitoring the whole life cycle of slope instability and positioning the potential sliding surface is discussed. Through the analysis of the test results, it is concluded that the fiber grating strain sensor can effectively monitor the deep displacement of the slope. PVC pipe and the soil have deformation coordination, which is able to effectively reinforce the slope body together with the combined anchor cable sensing device, and can continuously sense the potential sliding surface in the whole life cycle of the slope. By comparing the results of Newton force monitoring curve with the fiber grating strain monitoring, the mechanical law of “Newton force sudden drops, immediately catastrophe happens” is further verified. The feasibility of the combined sensing and early warning method of optical fiber sensing technology and Newton force monitoring is verified. This method realizes the further optimization of Newton force monitoring system.

Optimization of air distribution and coal blending in pulverized coal boilers for high-temperature corrosion prevention based on POD reduced-order modeling

High-temperature corrosion in coal-fired boilers poses a significant threat to safe operation. However, there is currently a lack of effective online monitoring and optimization methods for high-temperature corrosion. Therefore, this study proposes a novel approach to rapidly predict the distribution of chemical species and evaluate high-temperature corrosion degrees, along with optimizing operating conditions to prevent high-temperature corrosion. Firstly, a total of 564 Computational Fluid Dynamics (CFD) simulations are performed on a 330 MW tangentially fired boiler, covering various operating conditions, including coal blending, air distribution, boiler load, etc., to obtain a database of O2, CO, and H2S distributions within the boiler. Then a method based on Proper Orthogonal Decomposition (POD) and Support Vector Regression (SVR) is used to process the database to realize real-time prediction of boiler chemical species distribution, which is next utilized as inputs of a high-temperature corrosion evaluation to obtain in-situ corrosion degree distribution. Finally, Particle Swarm Optimization (PSO) is used to optimize coal blending and air distribution schemes, effectively reducing severe corrosion ratio from 36.34 % to 10.04 % in a typical case by improving the atmosphere near the water walls. This study thus provides a new perspective for online boiler diagnostics and digital twin construction, particularly by achieving online monitoring of high-temperature corrosion and optimizing operating conditions to prevent corrosion.

Optimizing Drought Assessment for Soil Moisture Deficits

AbstractAccurate drought assessments are critical for mitigating the deleterious impacts of water scarcity on communities across the world. In many regions, deficits in soil moisture represent a key driver of drought conditions. However, relationships between soil moisture and widely used drought indicators have not been thoroughly evaluated. In addition, there has not been an in‐depth assessment of the accuracy of operational soil moisture models used for drought monitoring. Here, we used 2,405 observed time series of soil moisture from 637 long‐term monitoring stations across the conterminous United States to test the ability of meteorological drought indices and soil moisture models to accurately characterize soil moisture drought. The optimal timescales for meteorological drought indices varied substantially by depth, but were ∼30 days for depth averaged conditions; progressively longer timescales (∼10–80 days) represent progressively deeper soil moisture (2–36 in.). However, soil moisture models (including Short‐term Prediction Research and Transition Center, Soil Moisture Active Passive L4, and Topofire) significantly outperformed the meteorological drought indices for predicting standardized soil moisture anomalies and drought conditions. Additionally, soil moisture models represent near instantaneous conditions, implicitly aggregating antecedent data thereby eliminating the need for timescales, providing a more effective and convenient method for soil moisture drought monitoring. We conclude that soil moisture models provide a straightforward and favorable alternative to meteorological drought indices that better characterize soil moisture drought.

Vibration signal acquisition and extraction for cutter wear monitoring

Abstract The cutter wear state is key in manufacturing. During the machining, the vibration signal of the tool spindle will change with the increase of cutter wear, which provides an effective method for cutter wear monitoring. However, due to the popularity of machining centers, the machining trajectory of a cutter is extremely complex in practical production. The complexity includes a single process containing multiple work steps, a step containing random and long non-cutting time, etc., making it difficult to acquire and extract the specific step signal as the effective signal for cutter wear monitoring. Therefore, this paper proposes a system that can synchronously acquire machine parameters and tool spindle vibration signals. Then, two algorithms—the cutting signal recognition algorithm and the step signal similarity detection algorithm—are proposed. The former algorithm is based on sliding window energy, which can accurately identify the instant the cutter begins to cut the workpiece. The step signal similarity detection algorithm based on the Edit Distance on Real (EDR) sequence ensures the correctness of the step extraction. The experimental results show that the system has efficient acquisition of vibration signals and correct step signal extraction, providing a data basis for cutter wear monitoring.

Multipanel Approach including miRNAs, Inflammatory Markers, and Depressive Symptoms for Metabolic Dysfunction-Associated Steatotic Liver Disease Diagnosis during 2-Year Nutritional Intervention.

Metabolic dysfunction-associated steatotic liver disease (MASLD), with a prevalence of 30% of adults globally, is considered a multifactorial disease. There is a lack of effective non-invasive methods for accurate diagnosis and monitoring. Therefore, this study aimed to explore associations between changes in circulating miRNA levels, inflammatory markers, and depressive symptoms with hepatic variables in MASLD subjects and their combined potential to predict the disease after following a dietary intervention. Biochemical markers, body composition, circulating miRNAs and hepatic and psychological status of 55 subjects with MASLD with obesity and overweight from the FLiO study were evaluated by undergoing a 6-, 12- and 24-month nutritional intervention. The highest accuracy values of combined panels to predict the disease were identified after 24 months. A combination panel that included changes in liver stiffness, high-density lipoprotein cholesterol (HDL-c), body mass index (BMI), depressive symptoms, and triglycerides (TG) yielded an AUC of 0.90. Another panel that included changes in hepatic fat content, total cholesterol (TC), miR15b-3p, TG, and depressive symptoms revealed an AUC of 0.89. These findings identify non-invasive biomarker panels including circulating miRNAs, inflammatory markers, depressive symptoms and other metabolic variables for predicting MASLD presence and emphasize the importance of precision nutrition in MASLD management and the sustained adherence to healthy lifestyle patterns.

SEMG-based automatic characterization of swallowed materials

Monitoring of ingestive activities is critically important for managing the health and wellness of individuals with various health conditions, including the elderly, diabetics, and individuals seeking better weight control. Monitoring swallowing events can be an ideal surrogate for developing streamlined methods for effective monitoring and quantification of eating or drinking events. Swallowing is an essential process for maintaining life. This seemingly simple process is the result of coordinated actions of several muscles and nerves in a complex fashion. In this study, we introduce automated methods for the detection and quantification of various eating and drinking activities. Wireless surface electromyography (sEMG) was used to detect chewing and swallowing from sEMG signals obtained from the sternocleidomastoid muscle, in addition to signals obtained from a wrist-mounted IMU sensor. A total of 4675 swallows were collected from 55 participants in the study. Multiple methods were employed to estimate bolus volumes in the case of fluid intake, including regression and classification models. Among the tested models, neural networks-based regression achieved an R2 of 0.88 and a root mean squared error of 0.2 (minimum bolus volume was 10 ml). Convolutional neural networks-based classification (when considering each bolus volume as a separate class) achieved an accuracy of over 99% using random cross-validation and around 66% using cross-subject validation. Multiple classification methods were also used for solid bolus type detection, including SVM and decision trees (DT), which achieved an accuracy above 99% with random validation and above 94% in cross-subject validation. Finally, regression models with both random and cross-subject validation were used for estimating the solid bolus volume with an R2 value that approached 1 and root mean squared error values as low as 0.00037 (minimum solid bolus weight was 3 gm). These reported results lay the foundation for a cost-effective and non-invasive method for monitoring swallowing activities which can be extremely beneficial in managing various chronic health conditions, such as diabetes and obesity.

Environmental DNA metabarcoding reflects spatiotemporal fish community shifts in the Scheldt estuary

Estuarine ecosystems face increasing anthropogenic pressures, necessitating effective monitoring methods to mitigate their impacts on the biodiversity they harbour. The use of environmental DNA (eDNA) based detection methods is increasingly recognized as a promising tool to complement other, potentially invasive monitoring techniques. Integrating such eDNA analyses into monitoring frameworks for large ecosystems is still challenging and requires a deeper understanding of the scale and resolution at which eDNA patterns may offer insights in species presence and community composition space and time. The Scheldt estuary, characterized by its diverse habitats and complex currents, is one of the largest Western European tidal river systems. Until now, it remains challenging to obtain accurate information on fish communities living in and migrating through this ecosystem, consequently confining our knowledge to specific locations. To explore the potential of eDNA based monitoring, we simultaneously combine stow net fishing with eDNA metabarcoding, to assess spatiotemporal shifts in the Scheldt estuary's fish communities. In total, we detected 71 fish species in the estuary using eDNA metabarcoding, partly overlapping with historic fish community data gathered at the different study locations and in contrast to only 42 species using stow net fishing during the same survey period. Community compositions found by both detection methods varied among sampling locations, driven by a clear correlation to the salinity gradient. Limited effects of sampling depth and tide were observed on the eDNA metabarcoding data, allowing a significant reduction of the eDNA sampling effort for future eDNA fish monitoring campaigns in this study system. Our results further demonstrate that seasonal shifts in fish species occurrence can be detected using eDNA metabarcoding. Combining eDNA metabarcoding and stow net fishing further enhances our understanding of this vital waterway's diverse fish populations, allowing a higher resolution and more efficient monitoring strategy.

Raman and Mid-Infrared Spectroscopy Coupled With Machine–Deep Learning for Adulterant Detection in Ground Turmeric

The intricate nature of the global food supply chain and the presence of regulations spanning multiple jurisdictions contribute to an increased likelihood of food adulteration. This underscores the need for effective monitoring methods to guarantee the safety and nutritional quality of our food. In this context, the application of infrared spectroscopy-based techniques emerges as an environmentally friendly, non-invasive, and waste-minimizing solution for authenticating food products. Infrared spectra serve as unique molecular fingerprints, offering a multidimensional representation of how chemical bonds in the material interact with infrared light. Chemometrics, which are primarily linear-based models, play a crucial role in extracting essential information from spectral data, enabling dimensionality reduction, classification, and predictive analysis. Recent progress in the field of big data science and artificial intelligence has brought forth machine learning and deep learning algorithms explicitly designed to uncover features from complex multidimensional data, encompassing both linear and nonlinear relationships. These advancements have the potential to enhance the detection of adulterants in food products. This study assesses the accuracy of various shallow machine learning models and a deep learning model based on a one-dimensional convolutional neural network (1D CNN). The evaluation is conducted using Raman and infrared spectral data obtained from ground turmeric samples that were deliberately adulterated with five distinct substances. The study highlights the improved classification accuracy achieved through the implementation of the 1D CNN model.

Generalized Shannon entropy sparse wavelet packet transform for fault detection of traction motor bearings in high-speed trains

An effective structural health monitoring method of traction motor bearings is a powerful guarantee for the safety operation of high-speed trains. However, it is exceptionally difficult to detect bearing fault characteristics from the vibration signals of traction motor bearings operating at high rotational speeds. In this scenario, a generalized Shannon entropy sparse wavelet packet transform (GSWPT) for fault detection of motor bearings is proposed in this paper. Firstly, a generalized Shannon entropy sparse regularization method is proposed to obtain sparse wavelet reconstruction coefficients by extending the definition of the Shannon information entropy, and the non-convex sparse regularization function is minimized by synergistic swarm optimization algorithm. Then, the wavelet node coefficients are weighted according to the second-order cyclostationarity index of the wavelet packet node to further enhance the sparsity of the reconstructed signal. Moreover, the optimal decomposition level of GSWPT is adaptively selected by the maximum sparsity and cyclostationarity criterion. Particularly, in order to verify the bearing fault detection performance of GSWPT in practical engineering, a bearing fault dynamic model of traction motor in high-speed train was established based on Hertz contact theory and the fourth-order Runge-Kutta method to obtain simulated data under strong Gaussian white noise, and a corresponding test platform was constructed to collect experimental data under different operating conditions. Finally, the applications on the simulated and experimental signals of traction motor bearings in high-speed trains demonstrate that GSWPT significantly outperforms the conventional wavelet packet transform, dual-tree complex wavelet packet transform, blind deconvolution, modal decomposition, and Infogram methods to some extent for fault detection.

Solutions to Detect Air Quality in a Room and Improve It

Abstract: The project focuses on monitoring and improving indoor air quality by implementing an air quality detection system. Poor indoor air quality can have detrimental effects on health and well-being, from breathing difficulties to reduced cognitive function. Therefore, it is necessary to develop methods for effective monitoring and improvement of indoor air quality. In this project, we propose the use of sensors to detect various air pollutants such as particulate matter, volatile organic compounds (VOCs), carbon dioxide (CO2), and humidity levels. Sensor data will be collected and analyzed to assess the current state of air quality. Based on the analysis, appropriate measures will be taken to improve air quality, which may include ventilation modifications, air cleaners or other interventions. The aim of the project is to create a healthier and more comfortable indoor environment for residents by ensuring an optimal level of air quality.

Experimental study on response and precursor of pressure stimulated currents of combined coal-rock under cycling stress

The coal-rock combination body is prone to rock burst and surface subsidence under loading, and adopting effective monitoring methods are valuable. In this paper, cyclic loading and unloading (CLU) tests were conducted to investigate the response and precursor of pressure stimulated currents (PSCs) in coal-rock combination samples. The results indicate that the PSCs of the coal-rock combination samples have good response characteristics to stress. Furthermore, the PSCs between the two components are significantly larger and more stable than those of the coal body, which can clearly reflect the failure under a progressive failure mechanism and are related to the difference in the resistivities and microstructures of the components. During the CLU tests, the PSCs of each cycle are well fitted by the Gaussian distribution and have a memory effect. During the loading or unloading process of each cycle, the variation in PSCs with stress conforms to the power function relationship with exponent k. As the cycle number increases, the rates of increase in PSC under stress are gradually weakened, and the indexes of PSCs including exponent k increase or decrease sharply first and then remain stable or even decrease, which is due to the loading history. The stable state of these indexes with obvious inflection points in later cycles of CLU tests can be considered a precursor of coal-rock failure. The PSC flow direction between the two components is exactly opposite to that in the coal body. The results provide new ideas for the monitoring and prediction of coal-rock combination body failure, which is helpful for the prevention of geological disasters in mines.

Measurement of body size parameters and body weight prediction in beef cattle based on image analysis

The body size parameter of cattle is an important index reflecting the growth and development and health condition of cattle. The traditional manual contact measurement is not only a large workload and difficult to measure, but also prone to problems such as affecting the normal life habits of cattle. In this paper, we address this problem by proposing a contactless body size measurement method for cattle based on machine vision. Firstly, the cattle is confined to a fixed space using a position-limiting device, and images of the body of the cattle are taken from three directions: top, left, and right, using multiple cameras. Secondly, the image is segmented using a fuzzy clustering algorithm based on neighborhood adaptive local spatial information improvement, and the image is processed to extract the contour images of the top view and side view. The key points of body measurements were extracted using interval division and curvature calculation for the side view images, and the key point information was extracted using skeleton extraction and pruning for the top view images, which realized the measurements of body height(BH), rump height(RH), body slanting length(BSL), and abdominal circumference(AC) parameters of the cattle. The correlation between body size and weight data obtained by contactless methods was investigated and the modeled using one-factor linear regression, one-factor nonlinear regression, multivariate stepwise regression, RBF network fitting, BP neural network fitting, support vector machine, and particle swarm optimization-based support vector machine methods, respectively. Information on body size parameters was collected from 137 cattles, and the results showed that the maximum errors between the measured and actual values of BH, RH, BSL and AC were 5.0%, 4.4%, 3.6%, and 5.5%, respectively. Correlation of BH, RH, BSL and AC with weight obtained by non-contact methods was > 0.75. The BH parameter can be selected in the single-factor growth monitoring. The multi-body scale can reflect the growth status of cattle more comprehensively, in which RH, BSL and AC are important detection parameter; the multi-factor nonlinear model can reflect the growth characteristics of cattle more comprehensively. The contactless measurement method proposed in the paper can effectively improve the work efficiency and reduce the stress reaction of cattle, which is a long-term and effective monitoring method, and is of great significance in promoting accurate and welfare cattle rearing.

Spatial Distribution of Dermanyssus gallinae Infestations in Greece and Their Association with Ambient Temperature, Humidity, and Altitude.

Dermanyssus gallinae, the poultry red mite (PRM), is the most prevalent and harmful ectoparasite of laying hens globally. Although prevalence and risk factor studies can help veterinarians make decisions regarding farm treatments, relevant data are scarce. The present study investigated the prevalence and infestation severity of PRM in poultry farms across Greece and examined potential risk factors. AviVet traps were used to sample 84 farms (51 backyard, 33 industrial) over three years. Farm altitude, temperature, humidity, region, and production systems were assessed as potential risk factors with chi-square tests, initially for all the studied farms and then exclusively for backyard farms. The overall prevalence was 75.0% and was higher in backyard farms (80.4%) compared with industrial ones (66.7%), varying regionally from 66.7 to 90.9%. Altitude and temperature were not significant risk factors, but farms with humidity <60% had a lower infestation risk. Infestation severity did not significantly differ by risk factors. The poultry red mite is highly prevalent across Greek poultry production systems and regions. In the future, global warming, reduced acaricide options, and a ban on cage systems will all threaten a wider spatio-temporal distribution of the PRM, justifying the urgent need for effective monitoring and control methods to protect hen production and welfare and workers' health.