Applications Of Metamaterials Research Articles

Design and optimization of three-dimensional composite multilayer cylindrical pentamode metamaterials for controlling low frequency acoustic waves

For three-dimensional pentamode metamaterials, it is of great significance to realize underwater low frequency acoustic wave control. Therefore, in order to compare with traditional double-cone pentamode metamaterials, two multilayer composite cylindrical three-dimensional pentamode metamaterials with low frequency and broad band gaps are proposed in this paper. By using pentamode metamaterials with lattice constants on the order of centimeters, the phononic band gaps below 60 Hz and the single-mode area below 30 Hz can be obtained. In addition, compared with asymmetrical double-cone locally resonant pentamode metamaterials, the lower edge frequency, relative bandwidth and figure of merit of the first phononic band gap can be reduced by up to 61.4%, 10.3% and 40.6%, respectively. It will provide reference and guidance for the engineering application of pentamode metamaterials in controlling the ultra-low frequency broadband acoustic waves, vibration and noise reduction.

Notch Flexure as Kirigami Cut for Tunable Mechanical Stretchability towards Metamaterial Application

ABSTRACT Kirigami is an art of paper cutting, which can be used in mechanical metamaterials, actuators, and energy absorption based on its deployable and load-deflection characteristics. Traditional cuts with zero width produce undesirable plastic deformation or even tear fracture due to stress concentration in stretching. This study proposes to enlarge the cut width into a notch flexure, which is applied to an orthogonality-cutted kirigami sheet, which buckles out of plane into a 3D configuration patterns under uniaxial tension. The use of compliant beam as the notch makes the stress distribution around the cuts more uniform in both elastic and elastoplastic regime. The experimental and numerical results show that by tuning the geometric parameters of cuts and material properties of the sheets, the trigger condition of 3D patterns can be adjusted. Potential capability of tunable phononic wave propagation in this kirigami-inspired metamaterial is demonstrated. This design methodology offers a theoretical guide for kirigami-based structures.

New perspectives for active acoustic metamaterials

It is generally accepted that active acoustic metamaterials could, in principle, control impinging sound in ways not possible with passive media. One way to realize this potential is to employ structures composed of sensor-driver unit cells. In this approach, sensors are detecting the impinging wave and actuators are driven coherently with the sensed fields in order to generate almost arbitrary and programmable scattering profiles for the cells. This presentation will briefly review some of the rich and unusual dynamics of metamaterials based on these cells and, most importantly, will highlight the untapped potential of this architecture. In particular, the sensor-driver cells are not limited to generating a response in the same physical field as the excitation. Here, I will focus on metasurfaces that respond with light to acoustic waves. One possible application of these acousto-optical metamaterials will be discussed, namely, the realization of new acoustic imaging devices with potentially much larger resolutions than traditional imaging devices. [Work supported by the National Science Foundation under Grant No. CMMI-1942901.]

Enhancing low frequency sound radiation of electrodynamic loudspeakers with acoustic metamaterials

Since the radiation resistance of a vibrating membrane in the air is proportional to frequency in the subwavelength range, low frequency (<100Hz) sound radiating devices generally require a large vibrating diaphragm and a bulky enclosure to be efficient and loud enough for practical use. The tapped horn topology, where the front radiation of an electrodynamic driver adds up with the back radiation after propagating through the internal volume of a speaker box, has been widely used in custom audio to provide low-frequency enhancement to the bass unit. Recently, people have demonstrated the application of acoustic metamaterials based on multiple Helmholtz resonators (HRs) in sound absorption, sound insulation, directivity control, impedance matching, etc. In this presentation, we show that by branching the sound path of a tapped horn speaker box with multiple Helmholtz resonators and fine-tuning the geometry of each individual element, we can produce high and relatively constant sound pressure levels at sub-wavelength frequencies, making our methodology a good candidate for compact subwoofer design. Genetic algorithm (GA) is used to bring forth optimal performance within the geometric framework. Both transfer matrix method and numerical simulation are employed to derive the sound output of a particular subwoofer.

Observation of optical gyromagnetic properties in a magneto-plasmonic metamaterial

Metamaterials with artificial optical properties have attracted significant research interest. In particular, artificial magnetic resonances with non-unity permeability tensor at optical frequencies in metamaterials have been reported. However, only non-unity diagonal elements of the permeability tensor have been demonstrated to date. A gyromagnetic permeability tensor with non-zero off-diagonal elements has not been observed at the optical frequencies. Here we report the observation of gyromagnetic properties in the near-infrared wavelength range in a magneto-plasmonic metamaterial. The non-zero off-diagonal permeability tensor element causes the transverse magneto-optical Kerr effect under s-polarized incidence that otherwise vanishes if the permeability tensor is not gyromagnetic. By retrieving the permeability tensor elements from reflection, transmission, and transverse magneto-optical Kerr effect spectra, we show that the effective off-diagonal permeability tensor elements reach 10−3 level at the resonance wavelength (~900 nm) of the split-ring resonators, which is at least two orders of magnitude higher than magneto-optical materials at the same wavelength. The artificial gyromagnetic permeability is attributed to the change in the local electric field direction modulated by the split-ring resonators. Our study demonstrates the possibility of engineering the permeability and permittivity tensors in metamaterials at arbitrary frequencies, thereby promising a variety of applications of next-generation nonreciprocal photonic devices, magneto-plasmonic sensors, and active metamaterials.

Surface-enhanced Raman scattering from an electromagnetic induced transparency substrate for the determination of hepatocellular carcinoma.

Surface-enhanced Raman scattering (SERS) is a powerful analytical method that is especially suitable for the detection of protein molecules. Detection sensitivity of SERS is directly related to the enhancement factor of the substrate, which is dependent on the strength of a local surface electric field generated by surface plasmonic resonance from substrate. In this study, an electromagnetic induced transparency like (EIT-like) metamaterial was used as the SERS substrate. The corresponding plasmonic resonance structure not only produces stronger optical near field but also reduces the spectral line broadening due to radiation damping. This is very beneficial for SERS process, which is strongly dependent on electric field intensity, to improve the sensitivity of SERS detection. Compared with the single resonance mode substrate, the enhancement factor for SERS with the double-mode substrate was increased by an order of magnitude. The obtained EIT-like substrate was used as a SERS-active substrate to detect Lens culinaris agglutinin (LCA)-reactive fraction of AFP (AFP-L3), a hepatocellular carcinoma (HCC)-specific maker. Experimental results are in good agreement with the clinical diagnosis, which demonstrates the potential application of metamaterials in the SERS-based diagnosis and biosensing.

Broadband Coding Metasurfaces with 2-bit Manipulations

Due to their limited number of units but outstanding ability to control rather complex wave-propagation phenomena, acoustic coding metasurfaces (ACMs) as two-dimensional metamaterials show a stronger competitiveness in metamaterial applications. However, hindered by their narrow-band modulation capability, the previously reported ACMs do not exhibit a broadband applicability. To address the frequency-based coding capability, in this paper we report broadband acoustic coding metasurfaces (BACMs) whose units are designed by the bottom-up topology optimization method. Subsequently, by utilizing our optimization strategy, we design the 1-bit coding units ``0'' and ``1'' with out-of-phase responses and the 2-bit coding units ``00'', ``01'', ``10,'' and ``11'' with four different phase shifts of 0\ifmmode^\circ\else\textdegree\fi{}, 90\ifmmode^\circ\else\textdegree\fi{}, 180\ifmmode^\circ\else\textdegree\fi{}, and 270\ifmmode^\circ\else\textdegree\fi{}. The topological features show constant phase differences, and in the following analysis, we attempt to explain this phenomenon by the related mechanisms of the internal resonances and the bianisotropy effect. The optimized BACMs are beneficial to improve the functions of a fixed coding metasurface in the frequency range. This idea provides an inspiration for fabricating fast-sector-scanning sound antenna. In combination with the convolution method, we also present the design strategy for the broadband fast-scanning multiple-beam antenna. The design of the acoustic antenna is a fixed coding sequence, and its scanning and echolocation mode does not depend on the reconfiguration of the coding units. Furthermore, we also demonstrate a pair of opposite functions, namely the broadband sound focusing and diffusion-scattering characteristics, which have potential applications in ultrasonic therapy, low-scattering target design and noise control, and so on.

META-MATERIALS

Meta-material is a word made of two parts; ‘meta’ meaning beyond and ‘materials’. They are materials engineered to exhibit properties which are not found in nature. They are made from assemblies of multiple elements fashioned from composite materials such as metals and plastics. The structural elements of these materials are arranged in repeating as well as non-repeating patterns. Meta-materials derive their properties from the base metal i.e., chemical composition as well as from their newly designed structures. Their precise shape, geometry, size, arrangement and orientation give them their smart properties capable of manipulating, absorbing, enhancing as well as bending waves ranging from acoustics to electromagnetic waves to achieve benefits that go beyond what is possible with conventional materials. Metamaterial research is an interdisciplinary field and involves various engineering domains such as electrical engineering, mechanical engineering, material science, solid state physics and more. Potential applications of metamaterials are diverse and include optical fibres, medical equipment, sensors as well as military operations and aerospace applications.

Negative Refraction Acoustic Lens Based on Elastic Shell Encapsulated Bubbles

AbstractAdvanced devices for acoustic negative refraction and cloaking can be achieved by utilizing acoustic metamaterials. However, the capacities of acoustic metamaterials often are weakened or even disappear when considering thermoviscous loss and damping, which limits the applications of metamaterials. Here, the negative refraction and acoustic imaging capacity of acoustic metamaterials that are comprised of 2D underwater elastic shell encapsulated bubble arrays numerically and experimentally is verified. The influence of thermoviscous loss and damping in solid structures on imaging is discussed. The transmission loss can be reduced by structural optimization. Accordingly, focusing of the sound emitted by a point source is achieved using a flat metamaterial slab whose effective refractive index is −1, which is promising for underwater acoustic imaging.

A novel all-metal metamaterial for constructing relativistic slow wave structure

In recent vacuum electronic devices, metamaterials have shown an obvious advantage of miniaturization. Due to increasing miniaturization demand, research of metamaterials in high-power microwave (HPM) field is now also a hotspot. For better applications of metamaterials, there are still two issues to be solved, the low space limit current of the structure and the low uniformity of the working electric field. To solve these problems, we construct a novel all-metal metamaterial structure by applying a 45° rotational arrangement in space and a four-support rod structure. This new metamaterial structure has a great uniformity of the axis electric field, and its electric field fluctuation is reduced from 8.6% to 2.8%. Based on this metamaterial structure, we proposed a novel relativistic slow wave structure, and its working mode has a negative dispersion characteristic. Using the method of expanding the electron beam channel, the space limit current of the relativistic slow wave structure is greatly improved to 12.3 kA, and the particle simulation method is used to prove the increase in the space limit current. In addition, it is found that this slow wave structure has higher coupling impedance, which provides a better working environment for an annular relativistic electron beam. Therefore, this metamaterial structure has great potential in the HPM field.

Realizing PIT-like transparency via the coupling of plasmonic dipole and ENZ modes.

Plasmon induced transparency (PIT), known as the coupling of plasmon modes in metamaterials, has attracted intensive research interests in photonic applications. In this work, a PIT-like transparency is realized via the strong coupling of plasmonic dipole and epsilon-near-zero (ENZ) mode. Two types of metasurfaces, namely the gold nanoantenna and dolmen-like metasurface, are designed with an integrated ENZ material aluminum doped zinc oxide (AZO) film. Simulations with the finite element method (FEM) demonstrate that single and double transparent windows are achieved respectively. The adjustments of the peak position and transmittance of transparent windows via the structure parameters and the AZO film thickness are further investigated. This work provides an alternative coupling scheme of realizing PIT-like transparency with simple metasurface design, and offers great potential for future metamaterial applications.

Phase-resolved visualization of radio-frequency standing waves in superconducting spiral resonator for metamaterial applications

Superconducting microcircuits and metamaterials are promising candidates for use in new generation cryogenic electronics. Their functionality is largely justified by the macroscopic distribution of electromagnetic fields in arranged unit cells, rather than by the microscopic properties of composite materials. We present a new method for visualizing the spatial structure of penetrating microwaves with microscopic resolution in planar superconducting macroscopic resonators as the most important circuit-forming elements of modern microelectronics. This method uses a low-temperature laser scanning microscope that examines the phase (i.e., direction) and amplitude of local radio-frequency currents versus the two-dimensional coordinates of the superconducting resonant structure under test. Phase-sensitive contrast is achieved by synchronizing the intensity-modulated laser radiation with the resonant harmonics of the microwave signal passing through the sample. In this case, the laser-beam-induced loss in the illuminated area will strongly depend on the local phase difference between the RF carrier signal and the spatially temporal structure of the focused laser oscillation. This approach eliminates the hardware limitations of the existing technique of radio-frequency microscopy and brings the phase-sensitive demodulation mode to the level necessary for studying the physics of superconducting metamaterials. The advantage of the presented method over the previous method of RF laser scanning micros-copy is demonstrated by the example of the formation of standing waves in a spiral superconducting Archimedean resonator up to the 38th eigenmode resonance.

Microscopies Enabled by Photonic Metamaterials.

In recent years, the biosensor research community has made rapid progress in the development of nanostructured materials capable of amplifying the interaction between light and biological matter. A common objective is to concentrate the electromagnetic energy associated with light into nanometer-scale volumes that, in many cases, can extend below the conventional Abbé diffraction limit. Dating back to the first application of surface plasmon resonance (SPR) for label-free detection of biomolecular interactions, resonant optical structures, including waveguides, ring resonators, and photonic crystals, have proven to be effective conduits for a wide range of optical enhancement effects that include enhanced excitation of photon emitters (such as quantum dots, organic dyes, and fluorescent proteins), enhanced extraction from photon emitters, enhanced optical absorption, and enhanced optical scattering (such as from Raman-scatterers and nanoparticles). The application of photonic metamaterials as a means for enhancing contrast in microscopy is a recent technological development. Through their ability to generate surface-localized and resonantly enhanced electromagnetic fields, photonic metamaterials are an effective surface for magnifying absorption, photon emission, and scattering associated with biological materials while an imaging system records spatial and temporal patterns. By replacing the conventional glass microscope slide with a photonic metamaterial, new forms of contrast and enhanced signal-to-noise are obtained for applications that include cancer diagnostics, infectious disease diagnostics, cell membrane imaging, biomolecular interaction analysis, and drug discovery. This paper will review the current state of the art in which photonic metamaterial surfaces are utilized in the context of microscopy.

Equiauxetic Hinged Archimedean Tilings

There is increasing interest in two-dimensional and quasi-two-dimensional materials and metamaterials for applications in chemistry, physics and engineering. Some of these applications are driven by the possible auxetic properties of such materials. Auxetic frameworks expand along one direction when subjected to a perpendicular stretching force. An equiauxetic framework has a unique mechanism of expansion (an equiauxetic mode) where the symmetry forces a Poisson’s ratio of −1. Hinged tilings offer opportunities for the design of auxetic and equiauxetic frameworks in 2D, and generic auxetic behaviour can often be detected using a symmetry extension of the scalar counting rule for mobility of periodic body-bar systems. Hinged frameworks based on Archimedean tilings of the plane are considered here. It is known that the regular hexagonal tiling, {63}, leads to an equiauxetic framework for both single-link and double-link connections between the tiles. For single-link connections, three Archimedean tilings considered as hinged body-bar frameworks are found here to be equiauxetic: these are {3.122}, {4.6.12}, and {4.82}. For double-link connections, three Archimedean tilings considered as hinged body-bar frameworks are found to be equiauxetic: these are {34.6}, {32.4.3.4}, and {3.6.3.6}.

Mechanical properties of concrete composites with auxetic single and layered honeycomb structures

Auxetic materials exhibit desirable mechanical properties, e.g., fracture resistance, shear resistance and energy dissipation due to their unique deformation characteristics. Honeycomb sandwich structures also have superior properties, e.g., energy absorption performance and low density. These desirable characteristics enable them as promising alternatives for building construction to meet the modern construction requirement which a higher safety standard is needed. In this study, a novel concrete composite with auxetic layered honeycomb was designed, manufactured and investigated for exploring the load-bearing performance of auxetic metamaterials under quasi-static compression. The layered honeycomb sandwich structure was analyzed by quasi-static compression test and its energy absorption performance was evaluated. Numerical models, validated by experimental results, were employed in parametric studies to further examine their performance. The results show that the layered structure has higher initial peak stress and stable platform stress. Moreover, it could improve the shear resistance and overall stability of the structure. These findings are beneficial to the applications of auxetic metamaterials in building construction.

Actively MEMS-Based Tunable Metamaterials for Advanced and Emerging Applications

In recent years, tunable metamaterials have attracted intensive research interest due to their outstanding characteristics, which are dependent on the geometrical dimensions rather than the material composition of the nanostructure. Among tuning approaches, micro-electro-mechanical systems (MEMS) is a well-known technology that mechanically reconfigures the metamaterial unit cells. In this study, the development of MEMS-based metamaterial is reviewed and analyzed based on several types of actuators, including electrothermal, electrostatic, electromagnetic, and stretching actuation mechanisms. The moveable displacement and driving power are the key factors in evaluating the performance of actuators. Therefore, a comparison of actuating methods is offered as a basic guideline for selecting micro-actuators integrated with metamaterial. Additionally, by exploiting electro-mechanical inputs, MEMS-based metamaterials make possible the manipulation of incident electromagnetic waves, including amplitude, frequency, phase, and the polarization state, which enables many implementations of potential applications in optics. In particular, two typical applications of MEMS-based tunable metamaterials are reviewed, i.e., logic operation and sensing. These integrations of MEMS with metamaterial provide a novel route for the enhancement of conventional optical devices and exhibit great potentials in innovative applications, such as intelligent optical networks, invisibility cloaks, photonic signal processing, and so on.

A Review on Metamaterial Application in Microstrip and Substrate Integrated Waveguide Antenna Designs

A Review on Metamaterial Application in Microstrip and Substrate Integrated Waveguide Antenna Designs

Conical Kresling origami and its applications to curvature and energy programming

Kresling origami has recently been widely used to design mechanical metamaterials, soft robots and smart devices, benefiting from its bistability and compression-twist coupling deformation. However, previous studies mostly focus on the traditional parallelogram Kresling patterns which can only be folded to cylindrical configurations. In this paper, we generalize the Kresling patterns by introducing free-form quadrilateral unit cells, leading to diverse conical folded configurations. The conical Kresling origami is modelled with a truss system, by which the stable states and energy landscapes are derived analytically. We find that the generalization preserves the bistable nature of parallelogram Kresling patterns, while enabling an enlarged design space of geometric parameters for structural and mechanical applications. To demonstrate this, we develop inverse design frameworks to employ conical Kresling origami to approximate arbitrary target surfaces of revolution and achieve prescribed energy landscapes. Various numerical examples obtained from our framework are presented, which agree well with the paper models and the finite-element simulations. We envision that the proposed conical Kresling pattern and inverse design framework can provide a new perspective for applications in deployable structures, shape-morphing devices, multi-modal robots and multistable metamaterials.

Overview of Approaches for Compensating Inherent Metamaterials Losses

Metamaterials are synthetic composite structures with extraordinary electromagnetic properties not readily accessible in ordinary materials. These media attracted massive attention due to their exotic characteristics. However, several issues have been encountered, such as the narrow bandwidth and inherent losses that restrict the spectrum and the variety of their applications. The losses have become the principal limiting factor when employing metamaterials in real-world applications. Consequently, overcoming them is crucially important and of practical necessity. This paper discusses the practical applications of metamaterials in constructing functional devices and the effects of the losses on such devices. In more depth, it reviews the available approaches for reducing the metamaterial losses developed over the last two decades in the light of available literature. These approaches include the utilization of the principles of electromagnetically induced transparency (EIT), geometric tailoring of the metamaterial structures, and embedding gain materials. Further, computational optimization techniques, such as particle swarm optimization (PSO) and genetic algorithm (GA), are also discussed to design low-loss metamaterials. The EIT-like metamaterial and the including of gain materials are systematic and universal approaches exhibiting low loss approaching zero. In contrast, the other two are not systematic and universal approaches.

Using adsorption kinetics to assemble vertically aligned nanorods at liquid interfaces for metamaterial applications.

Vertically aligned monolayers of metallic nanorods have a wide range of applications as metamaterials or in surface enhanced Raman spectroscopy. However the fabrication of such structures using current top-down methods or through assembly on solid substrates is either difficult to scale up or have limited possibilities for further modification after assembly. The aim of this paper is to use the adsorption kinetics of cylindrical nanorods at a liquid interface as a novel route for assembling vertically aligned nanorod arrays that overcomes these problems. Specifically, we model the adsorption kinetics of the particle using Langevin dynamics coupled to a finite element model, accurately capturing the deformation of the liquid meniscus and particle friction coefficients during adsorption. We find that the final orientation of the cylindrical nanorod is determined by their initial attack angle when they contact the liquid interface, and that the range of attack angles leading to the end-on state is maximised when nanorods approach the liquid interface from the bulk phase that is more energetically favorable. In the absence of an external field, only a fraction of adsorbing nanorods end up in the end-on state (≲40% even for nanorods approaching from the energetically favourable phase). However, by pre-aligning the metallic nanorods with experimentally achievable electric fields, this fraction can be effectively increased to 100%. Using nanophotonic calculations, we also demonstrate that the resultant vertically aligned structures can be used as epsilon-near-zero and hyperbolic metamaterials. Our kinetic assembly method is applicable to nanorods with a range of diameters, aspect ratios and materials and therefore represents a versatile, low-cost and powerful platform for fabricating vertically aligned nanorods for metamaterial applications.