Metal-to-ligand Charge Transfer Absorption Research Articles

Tailoring the Photophysical Properties of a Homoleptic Iron(II) Tetra N-Heterocyclic Carbene Complex by Attaching an Imidazolium Group to the (C∧N∧C) Pincer Ligand─A Comparative Study.

We here report the synthesis of the homoleptic iron(II) N-heterocyclic carbene (NHC) complex [Fe(miHpbmi)2](PF6)4 (miHpbmi = 4-((3-methyl-1H-imidazolium-1-yl)pyridine-2,6-diyl)bis(3-methylimidazol-2-ylidene)) and its electrochemical and photophysical properties. The introduction of the π-electron-withdrawing 3-methyl-1H-imidazol-3-ium-1-yl group into the NHC ligand framework resulted in stabilization of the metal-to-ligand charge transfer (MLCT) state and destabilization of the metal-centered (MC) states. This resulted in an improved excited-state lifetime of 16 ps compared to the 9 ps for the unsubstituted parent compound [Fe(pbmi)2](PF6)2 (pbmi = (pyridine-2,6-diyl)bis(3-methylimidazol-2-ylidene)) as well as a stronger MLCT absorption band extending more toward the red spectral region. However, compared to the carboxylic acid derivative [Fe(cpbmi)2](PF6)2 (cpbmi = 1,1'-(4-carboxypyridine-2,6-diyl)bis(3-methylimidazol-2-ylidene)), the excited-state lifetime of [Fe(miHpbmi)2](PF6)4 is the same, but both the extinction and the red shift are more pronounced for the former. Hence, this makes [Fe(miHpbmi)2](PF6)4 a promising pH-insensitive analogue of [Fe(cpbmi)2](PF6)2. Finally, the excited-state dynamics of the title compound [Fe(miHpbmi)2](PF6)4 was investigated in solvents with different viscosities, however, showing very little dependency of the depopulation of the excited states on the properties of the solvent used.

Synthesis, Electrochemistry, Photophysics, and Photochemistry of a Discrete Tetranuclear Copper(I) Sulfido Cluster.

A tetranuclear copper(I) complex, [Cu4{μ-(Ph2P)2NH}4(μ4-S)](PF6)2 (1), was synthesized. It was found to display intense and long-lived phosphorescence in the solid and solution states. The lowest-energy excited state was assigned as ligand-to-metal charge transfer (LMCT) [S2- → Cu4] mixed with some metal-centered (ds/dp) character. In addition, the phosphorescent state of this complex was found to be quenched by pyridinium acceptors via an oxidative electron-transfer quenching process. An excited-state reduction potential of -1.74 V versus saturated salt calomel electrode was estimated through oxidative quenching studies with a series of structurally related pyridinium acceptors, indicative of its strong reducing power in the excited state. From the transient absorption difference spectrum of the tetranuclear copper(I) sulfido complex and 4-(methoxycarbonyl)-N-methylpyridinium hexafluorophosphate, in addition to the characteristic absorption of the pyridinyl radical at ca. 395 nm, two absorption bands at ca. 500 and 660 nm were also observed. The former was assigned as an LMCT absorption [S2- → Cu4] and the latter as an intervalence charge-transfer transition, associated with the mixed-valence species CuI/CuI/CuI/CuII.

Influence of electron-donating ability of ligand and pH value on MLCT properties of cyanido-bridged complexes

In this work, one mononuclear complex CH3CNFeII(eq-Py4PzMe2) (1) and two binuclear complexes Cp(dppe)MIICNFeII(eq-Py4PzMe2) (M = Ru 2, Fe 3; Cp = cyclopentadiene, dppe = 1,2-bis(diphenylphosphino)ethane, eq-Py4PzMe2 = 2-(1-(6-(1,1-di(pyridin-2-yl)ethyl)pyridin-2-yl)-1-(pyridin-2-yl)ethyl)pyrazine) were synthesized. Combined with the TDDFT calculations, the metal-to-ligand charge transfer (MLCT) properties of all the compounds were investigated. The results show that for the mononuclear complex, the MLCT originates from FeII to the pyrazine (Pz) component of the eq-Py4PzMe2 ligand. After the substitution of CH3CN in complex 1 by the half-sandwich fragment Cp(dppe)MIICN, the binuclear complexes 2 and 3 exhibit the MLCT transition from the neighboring FeII atom to the Pz component of the eq-Py4PzMe2 together with some contributions from the remote MII. With the increase of the electron-donating ability from CH3CN, Cp(dppe)RuIICN to Cp(dppe)FeIICN, the MLCT transition energy decreases. Furthermore, with the decrease of pH value, all the MLCT absorption bands are significantly redshifted by 160 nm or more, and the extent of these red shifts increases from complex 1 to 2, to 3.

Electronic States of Tris(bipyridine) Ruthenium(II) Complexes in Neat Solid Films Investigated by Electroabsorption Spectroscopy.

We present the electric field-induced absorption (electroabsorption, EA) spectra of the solid neat films of tris(bipyridine) Ru(II) complexes, which were recently functionalized in our group as photosensitizers in dye-sensitized solar cells, and we compare them with the results obtained for an archetypal [Ru(bpy)3]2+ ion (RBY). We argue that it is difficult to establish a unique set of molecular parameter values by discrete parametrization of the EA spectra under the Liptay formalism for non-degenerate excited states. Therefore, the experimental EA spectra are compared with the spectra computed by the TDDFT (time-dependent density-functional theory) method, which for the first time explains the mechanism of electroabsorption in tris(bipyridine) Ru complexes without any additional assumptions about the spectral lineshape of the EA signal. We have shown that the main EA feature, in a form close to the absorption second derivative observed in the spectral range of the first MLCT (metal-to-ligand charge transfer) absorption band in Ru(bpy)3(PF6)2, can be attributed to a delocalized and orbitally degenerate excited state. This result may have key implications for the EA mechanism in RBY-based systems that exhibit similar EA spectra due to the robust nature of MLCT electronic states in such systems.

Nanocomposites of Fe(II)-Based Metallo-Supramolecular Polymer and a Layered Inorganic-Organic Hybrid for Improved Electrochromic Materials.

Fe-based metallo-supramolecular polymer (polyFe), composed of Fe(II) ions and bis(terpyridyl)benzene, is known as a good electrochromic (EC) material. For the first time, to improve the EC properties, we prepared nanocomposites comprising polyFe and a layered inorganic–imidazoline covalently bonded hybrid (LIIm) by simply mixing them in methanol and then examined the effect of the nanocomposition on EC properties. The obtained blue/purple-colored composites (polyFe/LIIm composites) were demonstrated by scanning electron microscopy (SEM) to comprise a structure of LIIm nanoparticles coated with amorphous polyFe. Interestingly, X-ray diffraction (XRD) measurements suggested that there was no intercalation of polyFe in the interlayer space of LIIm. Ultraviolet-visible (UV-vis) spectroscopy measurements demonstrated that light absorption close to 600 nm was attributed to metal-to-ligand charge transfer (MLCT) from the Fe(II) ion to the bisterpyridine ligand and was influenced by LIIm in the composites. The composites exhibited a pair of redox waves, assigned to the redox between Fe(II) and Fe(III), in the cyclic voltammograms; moreover, the composites were estimated to be diffusion controlled. Thin composite films demonstrated reversible EC changes, triggered by the redox reaction of the metal. Furthermore, the results show that the nano-scale composition of the metallo-supramolecular polymers with LIIm can effectively improve the memory properties without reducing the contrast in transmittance (ΔT) of 70–76% in EC changes after applying 1.2 V vs. Ag/Ag+. The EC properties varied with varying ratios (3/0.1, 0.5, 1, and 5) of the polyFe/LIIm, and the ratio of 3/1 exhibited the longest memory and largest MLCT absorption peak among composites. The results show that the polyFe/LIIm composites are useful EC materials for dimming glass applications, such as smart windows.

Photochemical CO2 Reduction Using Rhenium(I) Tricarbonyl Complexes with Bipyridyl‐Type Ligands with and without Second Coordination Sphere Effects

AbstractThe effect of phenyl, phenol, aniline, amino, and CF3 substituents of the 2,2′‐bipyridine ligand in fac‐ReCl(L)(CO)3 (L=2,2′‐bipyridine derivative) catalysts on photochemical CO2 reduction in dimethylacetamide is examined, in order to understand the structure‐function relationships and to compare the catalytic activities with the previously published electrochemical results. All complexes including ReCl(bpy)(CO)3 have similar excited‐state lifetimes and emission spectra, but complex 1 with the Ph‐NH2 moiety exhibits a significantly larger molar absorption coefficient for its metal‐to‐ligand charge transfer (MLCT) band. All complexes we tested produce CO with only a negligible amount of H2 and formate in self‐sensitized systems in the presence of triethanolamine (TEOA) and in some cases, BIH (1,3‐dimethyl‐2‐phenyl‐2,3‐dihydro‐1H‐benzo[d]‐imidazole). The presence of the Ph‐NH2 moiety (complex 1) has a beneficial effect on both electrochemical and photochemical activity, allowing a turnover number (TON) of 32 and 120 for photochemical CO production (without and with BIH, respectively). In the case of the Ph‐OH group in the second coordination sphere (complexes 4 and 6), these complexes are active for photochemical CO2 reduction, despite the formation of a stable 6‐coordinate Re‐OPh intermediate via reductive deprotonation as previously observed under electrochemical conditions. Overall, BIH accelerates the rate of formation of the one‐electron reduced species (OERS) of the Re catalysts and allows higher turnover frequency (TOF) and TON for CO formation. The X‐ray structures of complexes 1 and 4 were determined to have distorted octahedral Re centres, and show π‐π stacking interactions with neighboring molecules as well as intramolecular hydrogen bonds to the internal chloride ligands. The unusually high absorptivity of the MLCT absorption of complex 1 has been explained by TD‐DFT calculations.

Dual-Redox System of Metallo-Supramolecular Polymers for Visible-to-Near-IR Modulable Electrochromism and Durable Device Fabrication

Dual-redox metallo-supramolecular polymers with a zigzag structure (polyFe-N and polyRu-N) were successfully synthesized by 1:1 complexation of a redox-active Fe(II) or Ru(II) ion and 4,4-bis(2,2:6,2-terpyridinyl)phenyl-triphenylamine (LTPA) as a redox-active ligand. The polymers had high solubility in methanol, and the polymer solutions showed dark brown (polyFe-N) or orange-red (polyRu-N) coloration. UV-vis spectra of the polymers displayed a strong metal-to-ligand charge transfer (MLCT) absorption in the visible region. Cyclic voltammograms of the polymer films exhibited two pairs of reversible redox waves. The first redox at ∼0.5 V versus Ag/Ag+ was assigned to the redox in the triphenylamine (TPA) moiety of LTPA, and the second redox at 0.8 V versus Ag/Ag+ (polyFe-N) or 0.9 V versus Ag/Ag+ (polyRu-N) was given to the redox of Fe(II)/(III) or Ru(II)/(III), respectively. Upon applying a positive potential of more than 0.5 V versus Ag/Ag+ to the polymer films, a new absorption at ∼820 nm in the near-infrared (NIR) region appeared with wide tailing to the longer wavelength. It is considered that the new absorption in the NIR region is caused by the polaron band of the oxidized ligand in the polymers. When the applied potential was increased to 1.0 V versus Ag/Ag+ (polyFe-N) or 1.1 V versus Ag/Ag+ (polyRu-N), the maximum wavelength of the new absorption in the NIR region shifted to 885-900 nm and the absorbance was further enhanced with disappearance of the MLCT absorption. Eventually, the original colors of the polymers were faint to light green. This visible-to-NIR electrochromism was reversible, and maximum optical contrast (ΔT) reached 52% in the visible region and 80% in the NIR region. A prototype solid-state device with the polymer was fabricated for practical utilization, exhibiting excellent cycle stability of >4000 cycles with maintaining high optical contrast from the visible-to-NIR range.

Third-Generation W(CNAr)6 Photoreductants (CNAr = Fused-Ring and Alkynyl-Bridged Arylisocyanides).

Homoleptic tungsten(0) arylisocyanides possess photophysical and photochemical properties that rival those of archetypal ruthenium(II) and iridium(III) polypyridine complexes. Previous studies established that extending the π-system of 2,6-diisopropylphenylisocyanide (CNDipp) by coupling aryl substituents para to the isocyanide functionality results in W(CNDippAr)6 oligoarylisocyanide complexes with greatly enhanced metal-to-ligand charge transfer (MLCT) excited-state properties relative to those of W(CNDipp)6. Extending electronic modifications to delineate additional design principles for this class of photosensitizers, herein we report a series of W(CNAr)6 compounds with naphthalene-based fused-ring (CN-1-(2-iPr)-Naph) and CNDipp-based alkynyl-bridged (CNDippCCAr) arylisocyanide ligands. Systematic variation of the secondary aromatic system in the CNDippCCAr platform provides a straightforward method to modulate the photophysical properties of W(CNDippCCAr)6 complexes, allowing access to an extended range of absorption/luminescence profiles and highly reducing excited states, while maintaining the high molar absorptivity MLCT absorption bands, high photoluminescence quantum yields, and long excited-state lifetimes of previous W(CNAr)6 complexes. Notably, W(CN-1-(2-iPr)-Naph)6 exhibits the longest excited-state lifetime of all W(CNAr)6 complexes explored thus far, highlighting the potential benefits of utilizing fused-ring arylisocyanide ligands in the construction of tungsten(0) photoreductants.

Development of Visible-Light Driven Cu(I) Complex Photosensitizers for Photocatalytic CO2 Reduction.

The visible-light responsive Cu(I)-complex photosensitizers were developed by introducing various aromatic substituents at the 4,7-positions of a 2,9-dimethyl-1,10-phenanthroline (dmp) ligand in a heteroleptic CuI(dmp)(DPEphos)+-type complexes (DPEphos = [2-(diphenylphosphino)phenyl]ether) for photocatalytic CO2 reduction. Introducing biphenyl groups (Bp-) on the dmp ligand enhanced the molar extinction coefficient (ε) of the metal-to-ligand charge transfer (MLCT) band in the visible region (ε = 7,500 M−1cm−1) compared to that of the phenyl (Ph-)-containing analog (ε = 5,700 M−1cm−1 at λmax = 388 nm). However, introducing 4-R-Ph- groups (R = the electron-withdrawing groups NC-, or NO2-) led to a red shift in the band to λmax = 390, 400, and 401 nm, respectively. Single-crystal X-ray analysis showed the Ph- groups were twisted because of the steric repulsion between the 2,6-protons of the Ph- groups and 5,6-protons of the dmp ligand. The result strongly indicated that the π-conjugation effect of the 4-R-Ph- groups is so weak that the lowering of the energy of the dmp π* orbitals is small. However, when 4-R-ph- was substituted by a 5-membered heterorings, there was a larger red shift, leading to an increase in the ε value of the MLCT absorption band. Thus, the substitution to 2-benzofuranyl- groups resulted in visible-light absorption up to 500 nm and a shoulder peak at around 420 nm (ε = 12,300 M−1cm−1) due to the expansion of π-conjugation over the substituted dmp ligand. The photocatalytic reaction for CO2 reduction was tested using the obtained CuI complexes as photosensitizers in the presence of a Fe(dmp)2(NCS)2 catalyst and 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole as a sacrificial reductant, which showed improved CO generation.

Enhancing the Visible-Light Absorption and Excited-State Properties of Cu(I) MLCT Excited States.

A computationally inspired Cu(I) metal-to-ligand charge transfer (MLCT) chromophore, [Cu(sbmpep)2]+ (sbmpep = 2,9-di(sec-butyl)-3,8-dimethyl-4,7-di(phenylethynyl)-1,10-phenanthroline), was synthesized in seven total steps, prepared from either dichloro- or dibromophenanthroline precursors. Complete synthesis, structural characterization, and electrochemistry, in addition to static and dynamic photophysical properties of [Cu(sbmpep)2]+, are reported on all relevant time scales. UV-Vis absorption spectroscopy revealed significant increases in oscillator strength along with a concomitant bathochromic shift in the MLCT absorption bands with respect to structurally related model complexes (ε = 16 500 M-1 cm-1 at 491 nm). Strong red photoluminescence (Φ = 2.7%, λmax = 687 nm) was observed from [Cu(sbmpep)2]+, which featured an average excited-state lifetime of 1.4 μs in deaerated dichloromethane. Cyclic and differential pulse voltammetry revealed ∼300 mV positive shifts in the measured one-electron reversible reduction and oxidation waves in relation to a Cu(I) model complex possessing identical structural elements without the π-conjugated 4,7-substituents. The excited-state redox potential of [Cu(sbmpep)2]+ was estimated to be -1.36 V, a notably powerful reductant for driving photoredox chemistry. The combination of conventional and ultrafast transient absorption and luminescence spectroscopy successfully map the excited-state dynamics of [Cu(sbmpep)2]+ from initial photoexcitation to the formation of the lowest-energy MLCT excited state and ultimately its relaxation to the ground state. This newly conceived molecule appears poised for photosensitization reactions involving energy and electron-transfer processes relevant to photochemical upconversion, photoredox catalysis, and solar fuels photochemistry.

Four-coordinated copper(I) complexes containing variably substituted N-heterocyclic carbenes (NHCs): Synthesis, photophysical properties and theoretical investigation

Three four-coordinated N-heterocyclic carbene (NHC) copper(I) complexes, [Cu(NaphIm-Py)(POP)]PF6 (1), [Cu(AnthrIm-Py)(POP)]PF6 (2), and [Cu(PhBenIm-c-Py)(POP)]PF6 (3) (NaphIm-Py = 3-(naphthalen-2-ylmethyl-1-(pyridin-2-yl)-1H-imidazolylidene, AnthrIm-Py = 3-(anthracen-9-ylmethyl)-1-(pyridin-2-yl)-1H-imidazolylidene, PhBenIm-c-Py = 3-benzyl-1-(pyridin-2-ylmethyl)-1H-benzo[d]imidazolylidene, POP = bis[2-diphenylphosphino]-phenyl)ether) have been synthesized and characterized. The effect of varying carbene ligands with different substituents on the structural aspects and photophysical properties of the complexes is systematically investigated. The lowest absorption bands of 1 at about 350 nm are assigned as metal-to-ligand charge transfer (MLCT) character with some contribution from ligand-to-ligand charge transfer (LLCT) character, while the π-π* transition of the anthryl group are responsible for the lowest absorption band of 2. For 3, no MLCT absorption band are observed in lower energy region. The emission wavelengths of all NHC-Cu(I) complexes are in the range of 520–550 nm with the phosphorescent origin in the solid state. 1 and 2 with naphthyl and anthryl groups show the lower photoluminescence efficiency due to the strong π-π stacking interactions, whereas 3 exhibit good photoluminescence properties companying with the higher quantum yields and long excited-state lifetimes. Density functional theory (DFT) and time dependent density functional theory (TDDFT) calculations were employed to rationalize the photophysical properties of the NHC-Cu(I) complexes.

Metal-to-ligand charge-transfer: Applications to visual detection of β-galactosidase activity and sandwich immunoassay

In this work, we report a novel use of the distinctive metal-to-ligand charge-transfer (MLCT) absorption properties of the chromogenic Fe(BPDS)34- (BPDS=bathophenanthroline disulfonic acid) reporter for the visual detection of β-galactosidase (β-Gal) activity and sandwich immunoassay. The enzymatic hydrolysis of the substrate p-aminophenyl-β-D-galactopyranoside can switch on the reduction of Fe3+ to Fe2+ and the subsequent complexation of Fe2+ with the BPDS ligand to generate the Fe(BPDS)34- reporter, leading to the appearance of the intense MLCT absorption band at 535nm and the colorless-to-red color change of the solution. Simply through a single step, the activity of β-Gal can be sensitively and selectively detected within the dynamic range of 0−220mUmL−1, with a limit of detection (LOD) of 1.69mUmL−1. This approach is applicable for the visual detection of β-Gal activities in the presence of complex human serum samples. Besides, when integrated with the sandwich immunoassay of carcinoembryonic antigen, a LOD of 1.16ngmL−1 can be achieved. In light of its prominent simplicity and practicality, our MLCT-based approach holds great potential in diagnostic and analytical applications.

Facile colorimetric assay of alkaline phosphatase activity using Fe(II)-phenanthroline reporter

We report a versatile approach for the colorimetric assay of alkaline phosphatase (ALP) activity based on the distinctive metal-to-ligand charge-transfer (MLCT) absorption properties of Fe(II)-phenanthroline reporter. In the presence of ALP, the applied substrate ascorbic acid 2-phosphate is enzymatically hydrolyzed to produce ascorbic acid, which then reduces Fe3+ to Fe2+. The complexation of Fe2+ with the bathophenanthroline disulfonate (BPS) ligand generates a blood-red Fe(BPS)34− reporter, which is characterized by an intense MLCT absorption band at 535 nm in the visible range. Under optimal conditions, the spectral output exhibits a good quantitative relationship with ALP activity over the range of 0–220 mU mL−1 with a detection limit of 0.94 mU mL−1. Moreover, the activity of ALP can also be conveniently judged through naked-eye observations. Results indicate that it is highly selective and can be applied to the screening of ALP inhibitors. In addition, it has been successfully employed to detect the endogenous ALP level of undiluted human serum samples, with a detection limit of 1.05 mU mL−1 being achieved. This approach avoids any elaborately designed substrates and holds considerable simplicity and flexibility for reporter design. This study broadens the horizon of the applications of phenanthroline-based transition metal complexes. Furthermore, an efficient and practical method like this has the potential to be widely used in clinical applications and in the point-of-care testing.

Prolonging the Emissive Lifetimes of Copper(I) Complexes with 3MLCT and 3(π–π*) State Equilibria – A Fluorene Moiety as an “Energy Reservoir”

Two CuI complexes, [Cu(imPhen)(POP)]PF6 (1, imPhen = 1H‐imidazo[4,5‐f][1,10]phenanthroline, POP = bis[2‐diphenylphosphino]phenyl ether) and [Cu(Flu‐imPhen)(POP)]PF6 {2, Flu‐imPhen = 2‐(9H‐fluoren‐2‐yl)‐1H‐imidazo[4,5‐f][1,10]phenanthroline} were synthesized and characterized. a weak metal‐to‐ligand charge‐transfer (MLCT) absorption band at λ = 401 nm with a relatively low molar extinction coefficient (ε = 3170 m–1 cm–1) was observed for 1. In contrast, 2 displayed a higher MLCT absorption band at λ = 405 nm (ε = 5400 m–1 cm–1) owing to the incorporation of a fluorene group to imPhen ring. Complexes 1 and 2 exhibited similar emission wavelengths and quantum yields (λem = 564 nm, ϕ = 11.2 % for 1 and λem = 568 nm, ϕ = 9.0 % for 2); however, the excited‐state lifetime of 2 (τ = 51.2 µs) was almost four times longer than that of 1 (τ = 13.8 µs). The prolonged luminescence lifetime of 2 was rationalized by the reversible energy transfer between the 3MLCT state of the Cu atom and the 3π→π* state of fluorene moiety. To the best of our knowledge, this is the first use of a fluorene group as a triplet energy reservoir to extend the excited‐state lifetime of an emissive 3MLCT state of a CuI complex.

Evidence for Cation-Controlled Excited-State Localization in a Ruthenium Polypyridyl Compound.

The visible absorption and photoluminescence (PL) properties of the four neutral ruthenium diimine compounds [Ru(bpy)2(dcb)] (B2B), [Ru(dtb)2(dcb)] (D2B), [Ru(bpy)2(dcbq)] (B2Q), and [Ru(dtb)2(dcbq)] (D2Q), where bpy is 2,2'-bipyridine, dcb is 4,4'-(CO2(-))2-bpy, dtb is 4,4'-(tert-butyl)2-bpy, and dcbq is 4,4'-(CO2(-))2-2,2'-biquinoline, are reported in the presence of Lewis acidic cations present in fluid solutions at room temperature. In methanol solutions, the measured spectra were insensitive to the presence of these cations, while in acetonitrile a significant red shift in the PL spectra (≤1400 cm(-1)) was observed consistent with stabilization of the metal-to-ligand charge transfer (MLCT) excited state through Lewis acid-base adduct formation. No significant spectral changes were observed in control experiments with the tetrabutylammonium cation. Titration data with Li(+), Na(+), Mg(2+), Ca(2+), Zn(2+), Al(3+), Y(3+), and La(3+) showed that the extent of stabilization saturated at high cation concentration with magnitudes that scaled roughly with the cation charge-to-size ratio. The visible absorption spectra of D2Q was particularly informative due to the presence of two well-resolved MLCT absorption bands: (1) Ru → bpy, λmax ≈ 450 nm; and (2) Ru → dcbq, λmax ≈ 540 nm. The higher-energy band blue-shifted and the lower-energy band red-shifted upon cation addition. The PL intensity and lifetime of the excited state of B2B first increased with cation addition without significant shifts in the measured spectra, behavior attributed to a cation-induced change in the localization of the emissive excited state from bpy to dcb. The importance of excited-state localization and stabilization for solar energy conversion is discussed.

Structure-Performance Correlations in Electrochromic Behaviors of Terpyridine-Metal Hybrid Materials

Exploring the structure-property relationships is a fundamental but significant work for the design of new molecular. Rationaly designing of electrochromic materials that can switch rapidly and durably requires sophisticated understanding of the correlations between molecular structure and the performance. This work presents four electro-polymerizable metallosupramolecular coordinations self-assembled from triphenylamine-based terpyridine ligands and metal ions (Fe2+, Ru2+). The polymerized metal complexes can exhibit reversible change of the metal-to-ligand charge transfer (MLCT) absorption intensity. Along with the increase of voltage, the intensity of MLCT absorption peaks gradually reduced to disappear. Structure/performance correlations in electrochromic performance, especially the influence of different ligands and metal ions upon the coloration efficiency have been discussed.

The photo-degradation of mesotrione, a triketone herbicide, in the presence of Cu II ions

The study focuses first on the complexation of CuII ions with mesotrione. Experimental absorption spectra combined with quantum chemical calculations highlight that CuII ions bind to the molecule in bidentate mode between O1 and O7 atoms. The calculated electronic transitions of the complex show that three of them are mostly ligand-to-ligand electron transfer while the lowest-energy one involves a ligand-to-metal charge transfer (LMCT). The second aim of this work is to explore the effect of CuII complexation on the photo-degradation of mesotrione. The kinetics and mechanisms of the reactions are proposed on the basis of the experimental results. The effect of different parameters such as the irradiation wavelength, the oxygen concentration and the pH of the mixture and also the production of reactive species such as hydroxyl radicals is investigated. The photochemical degradation of mesotrione in water arises from the triplet excited state of the molecule and results in a photo-hydrolysis process. For the complex, by exciting mainly in its LMCT absorption band, an electron transfer between copper and mesotrione probably occurs and the mechanism of mesotrione-CuII photo-degradation differs: in addition to the photo-hydrolysis route, a photo-cyclisation process takes place and the oxidation of the ligand is accompanied by the reduction of CuII ions.

Combining topological and steric constraints for the preparation of heteroleptic copper(I) complexes.

Heteroleptic copper(I) complexes have been prepared from a macrocyclic ligand incorporating a 2,9-diphenyl-1,10-phenanthroline subunit (M30) and two bis-phosphines, namely bis[(2-diphenylphosphino)phenyl] ether (POP) and 1,3-bis(diphenylphosphino)propane (dppp). In both cases, the diphenylphosphino moieties of the PP ligand are too bulky to pass through the 30-membered ring of M30 during the coordination process, hence the formation of C2v-symmetrical pseudo-rotaxanes is prevented. When POP is used, X-ray crystal structure analysis shows the formation of a highly distorted [Cu(M30)(POP)](+) complex in which the POP ligand is only partially threaded through the M30 unit. This compound is poorly stable as the Cu(I) cation is not in a favorable coordination environment due to steric constraints. By contrast, in the case of dppp, the bis-phosphine ligand undergoes both steric and topological constraints and adopts a nonchelating coordination mode to generate [Cu2(M30)2(μ-dppp)](BF4)2. This compound exhibits metal-to-ligand charge transfer (MLCT) emission characterized by a very large Stokes' shift (≈200 nm) that is not attributed to a dramatic structural distortion between the ground and the emitting states but to very weak MLCT absorption transitions at longer wavelengths. Accordingly, [Cu2(M30)2(μ-dppp)](BF4)2 shows unusually high luminescence quantum yields for Cu(I) complexes, both in solution and in the solid state (0.5 and 7 %, respectively).

Electric Fields and Charge Screening in Dye Sensitized Mesoporous Nanocrystalline TiO2 Thin Films

The photophysical and electron transfer properties of mesoporous nanocrystalline (anatase) TiO2 thin films sensitized to visible light with [Ru(dtb)2(dcb)](PF6)2, where dtb is 4,4′-(tert-butyl)2-2,2′-bipyridine and dcb is 4,4′-(CO2H)2-2,2′-bipyridine, were quantified in acetonitrile solutions that contained 100 mM concentrations of Li+, Na+, Mg2+, or Ca2+ perchlorate salts. The presence of these salts resulted in a dramatic and cation dependent bathochromic (red) shift of the metal-to-ligand charge transfer (MLCT) absorption and photoluminescence (PL) spectra of Ru(dtb)2(dcb)/TiO2 relative to the value measured in neat or 100 mM TBAClO4, where TBA is tetrabutyl ammonium cation, acetonitrile solutions. The magnitude of the shifts followed the trend: Na+ < Li+ < Ca2+ < Mg2+. The PL intensity was also found to decrease in this same order and comparative actinometry studies showed that this was due to MLCT excited state electron transfer quenching by the TiO2 acceptor states. The RuIII/II redox chemistry was found to be non-Nernstian; the ideality factors were cation-dependent, suggestive of an underlying electric field effect. Electrochemical reduction of the TiO2 resulted in a black coloration and a blue shift of the fundamental (VB → CB) absorption, the normalized spectra were cation independent. Reduction of sensitized TiO2 also resulted in a blue shift of the MLCT absorption, the magnitude of which was used to determine the surface electric fields. Under conditions where about 20 electrons were present in each anatase nanocrystallite, the electric field strength reported by the Ru compound followed the trend Na+ < Li+ < Mg2+ < Ca2+, with Na+ being 1.1 MV/cm and Ca2+ 2.3 MV/cm. In pulsed laser experiments, the first-derivative absorption signature was observed transiently after excited state injection and iodide oxidation. These absorption amplitudes were time-dependent and decayed over time periods where the number of injected electrons was constant, with behavior attributed to screening of the surface electric field by cations present in the electrolyte. The monovalent cations screened charge much more rapidly than did the dications, kLi+,Na+ = 5.0 × 104 s–1 and kMg2+,Ca2+ = 5.0 × 102 s–1, presumably because the small number of injected electrons resulted in spatially isolated singly reduced Ti(III) sites that were more easily screened by the monocations.

A metallocene molecular complex as visible-light absorber for high-voltage organic-inorganic hybrid photovoltaic cells.

A thin solid-state dye-sensitized photovoltaic cell is fabricated by composing organic and inorganic heterojunctions in which the visible-light sensitizers are cyclopentadiene derivatives (Cp*) coordinated to a metal oxide, typically TiO2. The coordination bonds of the metallocene molecular complex (Ti-Cp*) create a new LMCT (ligand-to-metal charge transfer) absorption band and induce a rectified charge transfer from the organic ligands to TiO2, leading to photocurrent generation. Photovoltaic junctions are completed by coating crystalline organic molecules (perylene) as a hole-transport layer on the Cp*-coordinated TiO2 surface by using the vapor deposition method. The molecular plane of Cp* on the TiO2 surfaces seems to help the hole-transport layer to form ordered structures, which effectively improve carrier conductivities and minimize interfacial resistance. The organic-inorganic hybrid thin-film photocell with metallocene molecular complexes is capable of generating high open-circuit voltages exceeding 1.2 V.