Mechanism Of Membrane Interaction Research Articles

Topography Studies on the Membrane Interaction Mechanism of the Eosinophil Cationic Protein

The eosinophil cationic protein (ECP) is an antipathogen protein involved in the host defense system. ECP displays bactericidal and membrane lytic capacities [Carreras et al. (2003) Biochemistry 42, 6636-6644]. We have now characterized in detail the protein-membrane interaction process. All observed fluorescent parameters of the wild type and single-tryptophan-containing mutants, as well as the results of decomposition analysis of protein fluorescence, suggest that W10 and W35 belong to two distinct spectral classes I and III, respectively. Tryptophan residues were classified and assigned to distinct structural classes using statistical approaches based on the analysis of tryptophan microenvironment structural properties. W10 belongs to class I and is buried in a relative nonpolar, nonflexible protein environment, while W35 (class III) is fully exposed to free water molecules. Tryptophan solvent exposure and the depth of the protein insertion in the lipid bilayer were monitored by the degree of protein fluorescence quenching by KI and brominated phospholipids, respectively. Results indicate that W35 partially inserts into the lipid bilayer, whereas W10 does not. Further analysis by electron microscopy and dynamic light scattering indicates that ECP can destabilize and trigger lipid vesicle aggregation at a nanomolar concentration range, corresponding to about 1:1000 protein/lipid ratio. No significant leakage of the vesicle aqueous content takes place below that protein concentration threshold. The data are consistent with a membrane destabilization "carpet-like" mechanism.

Disturbance of erythrocyte lipid bilayer by amino acid-based surfactants

In an attempt to increase our knowledge regarding the mechanisms of surfactant membrane interaction, we studied the action of several anionic and cationic amino acid-based surfactants on membrane fluidity using fluorescence anisotropy. Anisotropy measurements demonstrated that almost all of the surfactants studied disturbed the external region of the erythrocyte membrane without affecting the core of the bilayer. How the physico-chemical properties and structure of these compounds affect dynamics of the lipid bilayer is discussed in detail.

Solid-State NMR Investigation of the Membrane-Disrupting Mechanism of Antimicrobial Peptides MSI-78 and MSI-594 Derived from Magainin 2 and Melittin

The mechanism of membrane interaction of two amphipathic antimicrobial peptides, MSI-78 and MSI-594, derived from magainin-2 and melittin, is presented. Both the peptides show excellent antimicrobial activity. The 8-anilinonaphthalene-1-sulfonic acid uptake experiment using Escherichia coli cells suggests that the outer membrane permeabilization is mainly due to electrostatic interactions. The interaction of MSI-78 and MSI-594 with lipid membranes was studied using 31P and 2H solid-state NMR, circular dichroism, and differential scanning calorimetry techniques. The binding of MSI-78 and MSI-594 to the lipid membrane is associated with a random coil to α-helix structural transition. MSI-78 and MSI-594 also induce the release of entrapped dye from POPC/POPG (3:1) vesicles. Measurement of the phase-transition temperature of peptide-DiPoPE dispersions shows that both MSI-78 and MSI-594 repress the lamellar-to-inverted hexagonal phase transition by inducing positive curvature strain. 15N NMR data suggest that both the peptides are oriented nearly perpendicular to the bilayer normal, which infers that the peptides most likely do not function via a barrel-stave mechanism of membrane-disruption. Data obtained from 31P NMR measurements using peptide-incorporated POPC and POPG oriented lamellar bilayers show a disorder in the orientation of lipids up to a peptide/lipid ratio of 1:20, and the formation of nonbilayer structures at peptide/lipid ratio >1:8. 2H-NMR experiments with selectively deuterated lipids reveal peptide-induced disorder in the methylene units of the lipid acyl chains. These results are discussed in light of lipid-peptide interactions leading to the disruption of membrane via either a carpet or a toroidal-type mechanism.

Effect of membrane mimicking environment on the conformation of a pore‐forming (xSxG)6peptide

The mechanism of membrane interaction by beta-sheet peptides is important to understand fundamental principles of folding of beta-barrel proteins and various beta-amyloid proteins. Here, we examined the conformational characteristics of a porin-like channel forming (xSxG)(6) peptide in solution and membrane-mimicking environments (CD and ATR-IR) to understand the structural changes of the peptide during membrane association and channel formation. A comparison of the peptide conformations in different microenvironments showed that beta-sheet formation is enhanced in membrane-mimicking liposomes and SDS-micelles. The lipid-induced beta-sheet formation was confirmed by the formation of a characteristic beta-sheet structure on mixing a methanolic solution of the peptide (partially folded) with preformed liposomes. The amphipathicity of the peptide; increased hydrogen bonding, hydrophilicity, and reduction in dimensionality of the membrane surface; membrane-peptide interaction-forces; and presence of flexible glycines might facilitate beta-sheet formation in membranes. Though the CD spectra of both the peptide-bound and peptide-incorporated lipids are reminiscent of a beta-sheet structure, a significant variation in the peak positions of the two beta-sheet structures was noticed. The channel characteristics of (xSxG)(6) in the presence of low ionic strength solutions of NEt(3)BzCl and glucosammonium chloride are comparable to those reported under high ionic strength solutions. Altogether the data suggest that the channel formation by (xSxG)(6) proceeds via beta-sheet aggregate formation at the membrane surface, beta-sheet insertion, and rearrangement into a beta-barrel-like structure. The beta-barrel-like channel formation most likely arises from a sequence similarity to beta-barrel porins whereas the lipid-induced beta-sheet formation is governed by the above-mentioned factors.

Contrasting Membrane Interaction Mechanisms of AP180 N-terminal Homology (ANTH) and Epsin N-terminal Homology (ENTH) Domains

Epsin and AP180/CALM are endocytotic accessory proteins that have been implicated in the formation of clathrin-coated pits. Both proteins have phosphatidylinositol 4,5-bisphosphate (PtdIns(4,5)P2)-binding domains in their N termini, but these domains are structurally and functionally different. To understand the basis of their distinct properties, we measured the PtdIns(4,5)P2-dependent membrane binding of the epsin N-terminal homology (ENTH) domain and the AP180 N-terminal homology (ANTH) domain by means of surface plasmon resonance and monolayer penetration techniques and also calculated the effect of PtdIns(4,5)P2 on the electrostatic potential of these domains. PtdIns(4,5)P2 enhances the electrostatic membrane association of both domains; however, PtdIns(4,5)P2 binding exerts distinct effects on their membrane dissociation. Specifically, PtdIns(4,5)P2 induces the membrane penetration of the N-terminal alpha-helix of the ENTH domain, which slows the membrane dissociation of the domain and triggers the membrane deformation. These results provide the biophysical explanation for the membrane bending activity of epsin and its ENTH domain.

Interaction of amoebapores and NK-lysin with symmetric phospholipid and asymmetric lipopolysaccharide/phospholipid bilayers.

Amoebapores from protozoan parasite Entamoeba histolytica and NK-lysin of porcine cytotoxic lymphocytes belong to the same family of saposin-like proteins. In addition to the structural similarity, amoebapores and NK-lysin are both highly effective against prokaryotic and eukaryotic target cells in that they permeabilize the target cell membranes. Here, we have investigated in detail the protein/lipid interaction for the three isoforms of amoebapore and NK-lysin. Results obtained from electrical measurements on planar bilayer membranes, including reconstitution models of the lipid matrix of the outer membrane of Escherichia coli and phospholipid membranes, fluorescence energy transfer spectroscopy with liposomes, and monolayer measurements on a Langmuir trough, provided information on lipid preferences, pH dependences, and membrane interaction mechanisms. The three amoebapores led to the formation of transient pores with similar characteristics in conductance, sublevels, and lifetime for the different isoforms. The conductance of the pores was dependent on the polarity of the applied clamp voltage, and the distribution of the sublevels was affected by the value of the clamp voltage. The size of the pores and distribution of conductance sublevels differed between symmetric phospholipid and asymmetric lipopolysaccharide/phospholipid bilayers. Notably, NK-lysin caused the formation of well-defined pores, which were lipid- and voltage-dependent, and their characteristics differed from those induced by amoebapores; e.g., the protein concentration necessary to induce pore formation was 20 times higher. The biophysical data give important information on the mode of action of these small effector proteins, which may further lead to a better understanding of peptide-membrane interactions in general.

Conformation and lipid binding properties of four peptides derived from the membrane-binding domain of CTP:phosphocholine cytidylyltransferase.

We are probing the mechanism of the lipid selective membrane interactions of CTP:phosphocholine cytidylyltransferase (CT). We have proposed that the membrane binding domain of CT (domain M) consists of a continuous amphipathic alpha-helix between residues approximately 240-295 [Dunne, S. J., et al. (1996) Biochemistry 35, 11975-11984]. This study examined the secondary structure and membrane binding properties of synthetic peptides derived from domain M: a 62mer peptide encompassing the entire domain (Pep62), a 33mer corresponding to the N-terminal portion (PepNH1), and two 33mers corresponding to the three C-terminal 11mer repeats, one with the wild-type sequence (Pep33Ser), and one with the three serines in the nonpolar face substituted with alanine (Pep33Ala). Peptide secondary structure was analyzed by circular dichroism, and lipid interactions were analyzed by a direct vesicle binding assay, by effects of lipid vesicles on peptide tryptophan fluorescence, and by monolayer surface pressure changes. All peptides bound to vesicles as alpha-helices with selectivity for anionic lipids. Binding involved intercalation of the peptide tryptophan into the hydrophobic membrane core. PepNH1, the peptide with the highest positive charge density, showed strong selectivity for anionic lipids. PepNH1 and Pep33Ser did not bind to PC vesicles; however, the more hydrophobic peptides, Pep33Ala and Pep62, did bind to PC vesicles, with apparent partition coefficients for PC that were only approximately 1 order of magnitude lower than those for PC/PG (1/1). Our results suggest that the polar serines interrupting the nonpolar face of the amphipathic helix serve to lower the lipid affinity and thereby enhance selectivity for anionic lipids. Although diacylglycerol is an activator of the enzyme, none of the peptides responded differentially to PC/diacylglycerol vesicles versus pure PC vesicles, suggesting that domain M alone is not sufficient for the enzyme's response to diacylglycerol. Increases in surface pressure at an air-water interface indicated that the domain M peptides had strong surface-seeking tendencies. This supports a binding orientation for domain M parallel to the membrane surface. Binding of CT peptides to spread lipid monolayers caused surface pressure reductions, suggesting condensation of lipids in the formation of lipid-peptide complexes. At low monolayer surface pressures, Pep62 interacted equally with anionic and zwitterionic phospholipids. This suggests that one determinant of the selectivity for anionic lipids is the lipid packing density (area per molecule).

Regulation of intracellular membrane interactions: Recent progress in the field of neurotransmitter release.

Maintenance of compartmental independence and diversity is part of the blueprint of the eukaryotic cell. The molecular composition of every organelle membrane is custom tailored to fulfill its unique tasks. It is retained by strict sorting and directional transport of newly synthesized cellular components by the use of specific transport vesicles. Temporally and spatially controlled membrane fission and fusion steps thus represent the basic process for delivery of both, membrane-bound and soluble components to their appropriate destination. This process is fundamental to cell growth, organelle inheritance during cell division, uptake and intracellular transport of membrane-bound and soluble molecules, and neuronal communication. The latter process has become one of the best studied examples in terms of regulatory mechanisms of membrane interactions. It has been dissected into the stages of transmitter vesicle docking, priming, and fusion: Specificity of membrane interactions depends on interactions between sets of organelle-specific membrane proteins. Priming of the secretory apparatus is an ATP-dependent process involving proteins and membrane phospholipids. Release of vesicle content is triggered by a rise in intracellular free Ca2+ levels that relieves a block previously established between the membranes poised to fuse. Neurotransmitter release is a paradigm of highly regulated intracellular membrane interaction and molecular mechanisms for this phenomenon begin to be delineated. J. Cell. Biochem. Suppls. 30/31:103-110, 1998. © 1998 Wiley-Liss, Inc.

The lung lectin surfactant protein A aggregates phospholipid vesicles via a novel mechanism

Surfactant protein A (SP-A), a lung-specific glycoprotein, consists of an N-terminal collagen-like domain and a C-terminal domain with a sequence similar to that of several Ca2(+)-dependent lectins. SP-A induces a rapid Ca2(+)-dependent aggregation of phospholipid vesicles. We report here that vesicle aggregation is mediated by Ca2(+)-induced interactions between carbohydrate-binding domains and oligosaccharide moieties of SP-A. This novel mechanism of membrane interactions may be relevant to the formation of the membrane lattice of tubular myelin, an extracellular form of surfactant.

Radixin, a barbed end-capping actin-modulating protein, is concentrated at the cleavage furrow during cytokinesis [published erratum appears in J Cell Biol 1991 Sep;114(5):1101-3

Radixin is a barbed end-capping actin-modulating protein which was first identified in isolated cell-to-cell adherens junctions from rat liver (Tsukita, Sa., Y. Hieda, and Sh. Tsukita, 1989. J. Cell Biol. 108:2369-2382). In the present study, we have analyzed the distribution of radixin in dividing cells. For this purpose, an mAb specific for radixin was obtained using chicken gizzard radixin as an antigen. By immunofluorescence microscopy with this mAb and a polyclonal antibody obtained previously, it was clearly shown in rat fibroblastic cells (3Y1 cells) that radixin was highly concentrated at the cleavage furrow during cytokinesis. Radixin appeared to accumulate rapidly at the cleavage furrow at the onset of furrowing, continued to be concentrated at the furrow during anaphase and telophase, and was finally enriched at the midbody. This concentration of radixin at the cleavage furrow was detected in all other cultured cells we examined: bovine epithelial cells (MDBK cells), mouse myeloma cells (P3 cells), rat kangaroo Ptk2 cells, mouse teratocarcinoma cells, and chicken fibroblasts. Furthermore, it became clear that the epitope for the mAb was immunofluorescently masked in the cell-to-cell adherens junctions. Together, these results lead us to conclude that radixin is present in the undercoat of the cell-to-cell adherens junctions and that of the cleavage furrow, although their respective molecular architectures are distinct. The possible roles of radixin at the cleavage furrow are discussed with special reference to the molecular mechanism of the actin filament-plasma membrane interaction at the furrow.

Differences in the membrane interaction of scrapie amyloid precursor proteins in normal and scrapie- or Creutzfeldt-Jakob disease-infected brains.

The membrane interaction and hydrophobicity of the normal (PrPC) and infectious isoform (PrPSc/CJD) of scrapie and Creutzfeldt-Jakob disease amyloid precursor proteins was studied. The normal isoform of hamster and human scrapie amyloid precursor protein was found on the microsomal/synaptosomal membranes anchored solely by the C-terminal glycolipid. Glycolipid cleavage resulted in dissociation from the membranes and change of behavior from a highly hydrophobic to a hydrophilic protein, susceptible to proteases. In contrast, the PrPSc/CJD isoform was resistant to release by glycolipid-cleaving enzymes. A part of PrPSc/CJD was released from the membranes after prolonged trypsin treatment, yielding a further protease-resistant product of 27-30 kDa. The results demonstrate the proteolytic resistance of the membrane-bound PrPSc/CJD isoform and also indicate the presence of a different, apparently disease-induced mechanism of membrane interaction in the scrapie- and CJD-infected microsomal and synaptosomal membranes.

Classification of microbial, plant and animal cytolysins based on their membrane-damaging effects on human fibroblasts

38 cytolytic agents of mainly microbial origin were investigated with respect to membrane-damaging activity on human diploid fibroblasts. Increased plasma membrane permeability was measured as leakage of three defined cytoplasmic markers of various sizes: α-aminoisobutyric acid, uridine nucleotides and ribosomal RNA. The relative leakages of these markers, caused by different concentrations of the various cytolysins, yielded a leakage pattern for each substance. Five distinct types of leakage patterns were obtained. These were transformed into numerical expressions by calculating the ratios between the amounts of cytolysin needed to release 50% of the nucleotide and ribosomal RNA markers and the amounts required to release 50% of the α-aminoisobutyric acid marker (ED 50 ratios). A classification of the cytolysins into five groups was arrived at on the basis of the different types of leakage patterns with the aid of reference cytolysins with well-known mechanisms of membrane interaction. These groups comprised: (1) detergent-like agents, (2) agents interacting with only certain constituents of the cell membrane, (3) agents interacting with specific receptor molecules in the membrane, (4) agents inducing small functional holes of a definable size, and (5) agents inducing only a very limited increase in plasma membrane permeability. The system may be useful for characterization and differentiation of new cytolytic agents of various sources as it divides membrane-damaging agents into separate groups on the basis of their principal function on intact human cells.